Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 167/757 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• Android AudioRecorder object wont read from microphone.

  - by supersk

  I'm trying to build a voip application on a new android device, i use AudioRecorder to read the microphone but I'm getting no valid results, just white noise. This happen only on this new device(other work well) and this is probably because this device has PTT ability. Is there some workaround to avoid using AudioRecoder to receive streaming data from the microphone? Thanks. supersk.

  Read the article

• Problem with thread after SCREEN_OFF in Android

  - by michael

  I’m doing an application that listens to the android.intent.action.SCREEN_OFF in a Service (if that matter) and then it is supposed to wait a few seconds and launch an action, I’ve tried a timer schedule method, thread and handler postDelay method but all of them seems to fail, they are never executed on a device, it seems like it’s being freezed/killed after phone is locked. It works on emulator and on device attached to USB, but never with device working on battery only, which actually is a main scenario. Do you know any solutions to this?

  Read the article

• Still some questions about USB

  - by b-gen-jack-o-neill

  Hi, few days ago I asked here about implementing USB. Now, If I may, would like to ask few more questions, about thing I dind´t quite understood. So, first, If I am right, Windows has device driver for USB interface, for the physical device that sends and receives communication. But what this driver offers to system (user)? I mean, USB protocol is made so its devices are adressed. So you first adress device than send message to it. But how sophisticted is the device controller (HW) and its driver? Is it so sophisticated that it is a chip you just send device adress and data, and it writes the outcomming data out and incomming data to some internal register to be read, or thru DMA directly to memory? Or, how its drivers (SW) really work? Does its driver has some advanced functions like send _data to _device? Becouse I somewhat internally hope there is a way to directly send some data thru USB, maybe by calling USB drivers itself? Is there any good article, tutorial you know about to really explain how all this logic works? Thanks.

  Read the article

• How to check in which position (landscape or portrait) os the iPhone now?

  - by Knodel

  I have an app with a tab bar, and nav controllers in each tab. When user shakes the device, a UIImageView appears as a child view in the nav controller. But the UIImageView must contain a special image, depending on the device's current orientation. If I write just - (void)willAnimateRotationToInterfaceOrientation:(UIInterfaceOrientation) if (interfaceOrientation == UIInterfaceOrientationPortrait|| interfaceOrientation == UIInterfaceOrientationPortraitUpsideDown) { //Code } else if (interfaceOrientation == UIInterfaceOrientationLandscapeRight||interfaceOrientation == UIInterfaceOrientationLandscapeLeft) { //Code } } The view just goes crazy if user rotated the device before shaking. Is there a method to get iPhones current orientation?

  Read the article

• How to access property in sub method after it runs?

  - by Warren

  I'm having a hard time working this one out but I think it should be pretty simple. Basically, I have this method which talks to a webservice and I need to return some data from the sub method, the "authCode". What am I doing wrong? How can I get the authCode out of the manager, or can I create a block or something to to ensure that the manager block runs first? Am I even using the right words - blocks, sub methods??? Please help :) - (NSString *)getAuthCodeEXAMPLE { __block NSString *returnString = @"nothing yet!"; NSURL *baseURL = [NSURL URLWithString:BaseURLString]; NSDictionary *parametersGetAuthCode = @{@"req": @"getauth"}; AFHTTPSessionManager *manager = [[AFHTTPSessionManager alloc] initWithBaseURL:baseURL]; manager.responseSerializer = [AFJSONResponseSerializer serializer]; [manager POST:APIscript parameters:parametersGetAuthCode success:^(NSURLSessionDataTask *task, id responseObject) { if ([task.response isKindOfClass:[NSHTTPURLResponse class]]) { NSHTTPURLResponse *r = (NSHTTPURLResponse *)task.response; if ([r statusCode] == 200) { self.returnedData = responseObject; NSString *authCode = [self.returnedData authcode]; NSLog(@"Authcode: %@", authCode); returnString = authCode; } } } failure:^(NSURLSessionDataTask *task, NSError *error) { UIAlertView *alertView = [[UIAlertView alloc] initWithTitle:@"Error" message:[error localizedDescription] delegate:nil cancelButtonTitle:@"Ok" otherButtonTitles:nil]; [alertView show]; }]; //this currently returns "nothing yet!" return returnString; }

  Read the article

• I'm writing a diagnostic app for iOS that loads a predetermined set of webpages and records the time it takes for the page to render on the device.

  - by user1754840

  I'm writing a sort of diagnostic app for iOS that opens a predetermined list of websites and records the elapsed time it takes each to load. I have the app open a UIWebView within a ViewController. Here are the important bits of the ViewController source: - (void)viewDidLoad { [super viewDidLoad]; DataClass *obj = [DataClass getInstance]; obj.startOfTest = [NSDate date]; //load the first webpage NSString *urlString = [websites objectAtIndex:obj.counter]; //assume firstWebsite is already instantiated and counter is initially set to zero obj.counter = obj.counter + 1; NSURL *url = [NSURL URLWithString:urlString]; NSURLRequest *request = [NSURLRequest requestWithURL:url]; [obj.websiteStartTimes addObject:[NSDate date]]; [webView loadRequest:request]; } - (void)webViewDidFinishLoading:(UIWebView *)localWebView{ DataClass *obj = [DataClass getInstance]; //gets 'global' variables if(!webView.loading){ NSString *urlString = [websites objectAt:obj.counter]; obj.counter = obj.counter + 1; NSURL *url = [NSURL URLWithString:urlString]; NSURLRequest *request = [NSURLRequest requestWithURL:url]; [obj.websiteStartTimes addObject:[NSDate date]]; [webView loadRequest:request]; } The problem with this code is that it seems to load the next website before the one before it has finished. I would have thought that both the call to webViewDidFinishLoading AND the if statement within that would ensure that the website would be done, but that's not the case. I've noticed that sometimes, a single website will invoke the didFinishLoading method more than once, but it would only enter the if statement once. For example, if I have a list of ten websites, the webView would only really show the 3rd and the 6th website on the list and then indicate that it was "done" rendering them all. What else can I do to ensure that a website is done loading completely and rendered to the screen before the app moves on to the next one?

  Read the article

• CodePlex Daily Summary for Tuesday, December 14, 2010

  CodePlex Daily Summary for Tuesday, December 14, 2010Popular ReleasesFlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010SuperWebSocket: SuperWebSocket Drop 2: Changes: based on SuperSocket 1.3 supported sub protocol supported SSL/TLS encryption (wss) in Sync socket mode fixed some data communication bugsSSH.NET Library: 2010.12.13: Fixes SFTP issue when you try to uploaded or download multiple files simultaneously. Usage example can be found hereRequest Tracker Data Access: 1.0.0.0: First releaseSQL Monitor: SQL Monitor 2.4: 1. auto adjust datagrids in query 2. disable activities related commands until activities tab is active.SuperSocket, an extensible socket application framework: SuperSocket 1.3 beta 1: SuperSocket 1.3 is built on .NET 4.0 framework. Bug fixes: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration value Third-part library upgrades: upgraded SuperSocket to .NET 4.0 upgraded EntLib 4.1 to 5.0 New features: supported UDP socket support custom protocol (can support binary protocol and other complecate...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.SwapWin: SwapWin 0.2: Updates: Bring all windows that are swapped to foreground. Make the window sent to primary screen active.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.New ProjectsAugmented Reality system in Soccer video: Augmented reality system and camera calibration system in soccer videos based on homography and vanishing points. Code generated with Visual C++ (best compiler is .net)Database Schema Provider: Database Schema Provider gets a database schema in unified format independent on the type of database. It uses ADO.NET data provider for Entity Framework. Dicke Bertha: Many many cool features... DNN Bookmark: DNN Bookmarks is a DNN module that aggregates the most popular social bookmarking tools and also allows you to bookmark your DNN web siteDough: Dough is a UI starter kit built using ASP.Net MVC and ExtJS. It's name comes from the concept of Amish friendship bread, a type of bread or cake made from a sourdough starter that is often shared in a manner similar to a chain letter.Garra - Gerenciador Financeiro: Garra é um sistema completo de controle financeiro: contas a pagar, contas a receber, investimentos, etc...ghcwp7: ghcwp7Hackathon - DotNetNuke Razor User Locator: The DotNetNuke Razor User Locator module demonstrates how Razor can be used to author DNN modules. This module shows where recent users to a web site came from based on their IP address. Hackathon. DotNetNuke Razor. Flickr Badge: Flickr badge desktop module allows you to display image thumbnails from Flickr and preview them inside DotNetNuke or on Flickr (controlled by module settings). Image thumbnails can be loaded by tag, user id, user group id, user set id and more.Hackathon: Razor Youtube Gallery: This is a DotNetNuke module which allows a website admin to add several relevant Youtube videos to a pane. The end user watches the selected Youtube video play, while scrolling through thumbnails of other videos to play those without refreshing the page. jQuery UI MVC3 Demo: Demo and possibly a skeleton for using jQuery UI in MVC3 (currently RC2).Microsoft Office Communicator History manager: Needs to save conversation history just on the local workstation (folder) then application could redstore it and show in simple window (mode) or user could open folder and lock on it manuallyMSTest Extensions - Msbuild: This project contains various msbuild tasks that extend helps with test execution using Mcrosoft testing frameworkRayCharlesTracer: this is a scholar project for a raytracer.Refunctor: F# interactive inside Reflector.Request Tracker Data Access: Best Practical RT (Request Tracker) data access .NET library for REST interface.SurfzApp: An application that does data mining on web resources of interest for Swedish windsurfers...Tesseract Solutions Corp. Data Access Base: Tesseract Data Access speeds up data access in .Net projects. Developed in C# .Net 4. It is a C#, class based ORM.TimBazinga EVoting: Undergrad project - designing an e-voting software system.Tiny Library CQRS: Tiny Library CQRS is a small demonstration project which demonstrates the concept of Domain Driven Design and the CQRS architecture pattern. This project relies on the Apworks DDD framework.Toptoys: toptoysWebGroup: WebGroup makes it easier for your website members to comunicate online. It work like Web IM + Forum + Twitter. It can be easily used in your current project. Developed in C#.WpfCustomChromeLibrary: WpfCustomChromeLibrary makes it easier to create WPF applications with custom chrome and caption buttons (min/max/close). You'll no longer have to do all the dirty work yourself in each application where you want a custom chrome. It's developed in XAML and C#.

  Read the article

• CodePlex Daily Summary for Sunday, November 11, 2012

  CodePlex Daily Summary for Sunday, November 11, 2012Popular ReleasesZXMAK2: Version 2.7.2.0: show extended rzx error info fix reset lag for PROFI ULA 5.xx fix reset behavior fix PROFI ULA timings (thanks to solegstar) fix #FF port for PROFI ULA add ATM710 memory module add new predefined machine configs: ATM Turbo 2, PROFI 3.XX???????: Monitor 2012-11-11: This is the first releaseVidCoder: 1.4.5 Beta: Removed the old Advanced user interface and moved x264 preset/profile/tune there instead. The functionality is still available through editing the options string. Added ability to specify the H.264 level. Added ability to choose VidCoder's interface language. If you are interested in translating, we can get VidCoder in your language! Updated WPF text rendering to use the better Display mode. Updated HandBrake core to SVN 5045. Removed logic that forced the .m4v extension in certain ...ImageGlass: Version 1.5: http://i1214.photobucket.com/albums/cc483/phapsuxeko/ImageGlass/1.png v1.5.4401.3015 Thumbnail bar: Increase loading speed Thumbnail image with ratio Support personal customization: mouse up, mouse down, mouse hover, selected item... Scroll to show all items Image viewer Zoom by scroll, or selected rectangle Speed up loading Zoom to cursor point New background design and customization and others... v1.5.4430.483 Thumbnail bar: Auto move scroll bar to selected image Show / Hi...Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 002: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes: A fix for the Netflix example from Chapter 6 that was missing a service reference A fix for the ImageHelper issue (images were not being saved) - this was due to the buffer being inadequate and required streaming the writeable bitmap to a buffer first before encoding and savingmyCollections: Version 2.3.2.0: New in this version : Added TheGamesDB.net API for Games and NDS Added Support for Windows Media Center Added Support for myMovies Added Support for XBMC Added Support for Dune HD Added Support for Mede8er Added Support for WD HDTV Added Fast search options Added order by Artist/Album for music You can now create covers and background for games You can now update your ID3 tag with the info of myCollections Fixed several provider Performance improvement New Splash ...Draw: Draw 1.0: Drawing PadPlayer Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...SQL Server Partitioned Table Framework: Partitioned Table Framework Release 1.0: SQL Server 2012 ReleaseSharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.D3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeDictationTool: DictationCool-WPF: • Open a media file to start a new dication. • Open a dct file to continue a dictation. • Compare your dictation with original text if exists. • Save your dictation to dct file, and restore it to continue later. • Save the compared result to html file.MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesDyanamic Reports (RDLC) - SharePoint 2010 Visual WebPart: Initial Release: This is a Initial Release.HTML Renderer: HTML Renderer 1.0.0.0 (3): Major performance improvement (http://theartofdev.wordpress.com/2012/10/25/how-i-optimized-html-renderer-and-fell-in-love-with-vs-profiler/) Minor fixes raised in issue tracker and discussions.Window Manager: Window Manager 1.0: First releaseNew Projectsarteytex: este es una prueba blockworld: An implementation of a goal stack planner.Customer Note: customer note is windows store applicationDraw: ?????????????：??????、CAD??、????。Football Management: Football Management System is web management system for football (soccer) leagues, teams and players. Hijri Converter API: This project is aimed to create a simple RESTful API using VB and ASP.NET to do Hijri-to-Gregorian and Gregorian-to-Hijri conversion.httpclient?????????: httpclient?????????（1）??????????（2）?????????（3）??2012-11-06??，???????。 Imagine Cup 2013: Develop project to Imagine Cup 2013MyAppReji: MyAppN2F Request: The N2F Request object is used to handle interactions between N2F and the global $_REQUEST variable, sanitizing any results which are returned.Orchard Metro Theme: Orchard Metro Theme is a clean and flexible multi-zone theme.Poker Clock And Goodies: poker w8ProjectASPReviewer: Review website for notebooks, tablets and smartphones.Prototype: Its about making an proto type for the final project.Prototype - 7COM0207: 7COM0207 web scripting module, Assignment 2QuickToAD: QuickToAD is a foundational development project for the purpose of jump-starting data-driven application projects.Release Manager: Release Manager is a project to design and develop Windows based Release Management Software.ResW File Code Generator: A Visual Studio 2012 Custom Tool for generating a strongly typed helper class for accessing localized resources from a .ResW file.SEO Tools: This is a website containing some commonly used SEO tools. I have only added a blog ping utility at this time but there is more to come. Thales communicator: A C# library that helps communicate with Thales HSMTrivial: A trivia framework: Trivial is a C# framework that helps you creating custom trivia-like applications.

  Read the article

• Ubuntu 12.04 KVM running Ubuntu 12.04 with linux-image-virtual crash on boot

  - by D.Mill

  One of my VMs is stuck on "pause" in virsh. If I destroy and restart it, it will go to pause after a bit of time as "running". I can at best enter my username at login if I'm quick but it'll then shutdown. I don't know where to start with this so any help would be great!! I can access the VMs files via guestfish. the kern.log and syslog don't populate new lines. This is the last input I get from kern.log: Dec 13 11:21:08 soft201 kernel: imklog 5.8.6, log source = /proc/kmsg started. Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 13 11:21:08 soft201 kernel: [ 0.000000] Linux version 3.2.0-34-virtual (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53-Ubuntu SMP Thu Nov 15 11:08:40 UTC 2012 (Ubuntu 3.2.0-34.53-virtual 3.2.33) Dec 13 11:21:08 soft201 kernel: [ 0.000000] Command line: root=UUID=61d48b48-a06a-48fb-842e-b38014086a93 ro quiet splash Dec 13 11:21:08 soft201 kernel: [ 0.000000] KERNEL supported cpus: Dec 13 11:21:08 soft201 kernel: [ 0.000000] Intel GenuineIntel Dec 13 11:21:08 soft201 kernel: [ 0.000000] AMD AuthenticAMD Dec 13 11:21:08 soft201 kernel: [ 0.000000] Centaur CentaurHauls Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-provided physical RAM map: Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffc000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000dfffc000 - 00000000e0000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000a20000000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] NX (Execute Disable) protection: active Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI 2.4 present. Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Dec 13 As you can see the last line gets cut off. I don't even know if this is that relevant. dmesg logs are empty. The qemu log for the VM returns this: 2012-12-13 12:29:47.584+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 40960 -smp 14,sockets=14,cores=1,threads=1 -name numerink201 -uuid f4a889ed-a089-05d0-cc9d-9825ab1faeba -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/numerink201.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/client.soft.fr/tmpcZAD9U.qcow2,if=none,id=drive-ide0-0-0,format=qcow2 -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -fsdev local,security_model=none,id=fsdev-fs0,path=/home/shared_folders/soft201 -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=hostshare,bus=pci.0,addr=0x5 -netdev tap,fd=18,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=02:00:00:1d:b9:e7,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/3 qemu: terminating on signal 15 from pid 28248 2012-12-13 12:30:14.455+0000: shutting down I've added more logging, libvirt.log gives me this: 2012-12-13 13:24:38.525+0000: 27694: info : libvirt version: 0.9.8 2012-12-13 13:24:38.525+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:38.525+0000: 27694: warning : qemuCapsInit:856 : Failed to get host power management capabilities 2012-12-13 13:24:39.865+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.865+0000: 27694: warning : lxcCapsInit:77 : Failed to get host power management capabilities 2012-12-13 13:24:39.866+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.866+0000: 27694: warning : umlCapsInit:87 : Failed to get host power management capabilities I don't really know where to go from here. I'll post whatever info you require

  Read the article

• Netgear VPN endpoint drops connectivity to single IP address

  - by Justin Bowers

  I'm having a strange issue with one of the networks I manage recently. We have about 14 different networks connected together through a Netgear hardware VPN. Everything has been running fine (other than standard connectivity problems) for a few years now, but I've hit a wall with a problem that's just cropped up at one of the VPN endpoint locations. Our primary VPN network is on the 192.168.1.0/24 subnet and our other 13 networks are on the 192.168.2.0/24 - 192.168.14.0/24 subnets. We run a terminal server on the 192.168.1.0/24 network with IP address 192.168.1.100. Starting Thursday of last week, we had a problem with connectivity of the 192.168.2.0/24 network to 192.168.1.100. When troubleshooting the problem, I found that Network 2 (192.168.2.0/24) still had connectivity to the Internet as well as VPN connectivity to Network 1 (192.168.1.0/24). We could ping and connect to any other device other than the server with IP address 192.168.1.100. Also, none of our networks had an issue accessing 192.168.1.100. I ran a scan on Network 2 after assigning static IP addresses to one of the workstations but received no response from 192.168.1.100 (looking for possibly a new device that someone had plugged into Network 2 that had a duplicate IP address with the server). Asking the staff, noone had reported connecting a new device to Network 2 as well. I then assigned a secondary IP address of 192.168.1.88 to the server and could ping and connect to the secondary IP address from Network 2, but still couldn't access it via 192.168.1.100. I then just rebooted the Netgear VPN Firewall (FVS318v3) and after it came back up, connectivity to 192.168.1.100 was restored. Beforehand, when checking for devices with a possible duplicate IP address, I did run a check for available wireless access points and stations and found none (our wireless is secured via MAC address access control through a WG102 device). I thought that it may have been a fluke for some reason since everything came back up after a power cycle of the VPN Firewall. Things ran fine for a few days until this afternoon, when the problem happened again. One of our users claimed that they had connectivity problems to the server and after connecting to the computer, I found that I couldn't ping the server address anymore. I could still ping the alternate IP address of the server though, so I went ahead and rebooted the VPN firewall again and connectivity was restored. Unfortunately, I can't find anything in the security or VPN logs of the firewall that helps point me in the right direction, so I thought I would go ahead and ask to see if anyone else has any other insight into why we've started having this problem. I am aware that it could still be a device with a duplicate IP address of the server on Network 2, but every employee claim states that there's been no such new device brought in to the network. I know this is a long read, but any help is appreciated! Thanks, Justin

  Read the article

• XenServer Converting HVM to Paravirtualised

  - by Karl Kloppenborg

  Recently I have been tasked with the daunting process of converting a setup of HVM enabled VMs (running on Citrix XenServer 5.6.0) into PV (paravirtualised) containers. The constraints of the project was that: The operating system must be functionally identical after the migration. minimal modification to the operating system (with exception of kernel / drive mapping) I also was allowed to change the bootloader(ie, grub) in what ever way I see fit. However, I have attempted this, I will firstly like to show you my steps I took. This at the moment is CentOS5.5 specific: Steps: yum install kernel-xen This installed: 2.6.18-194.32.1.el5xen edited: /boot/grub/menu.lst changed my specs to match: title CentOS (2.6.18-194.32.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-194.32.1.el5xen ro root=/dev/VolGroup00/LogVol00 console=xvc0 initrd /initrd-2.6.18-194.32.1.el5xen.img Then I changed my xenserver parameters to match: xe vm-param-set uuid=[vm uuid] PV-bootloader-args="--kernel /vmlinuz-2.6.18-194.32.1.el5xen --ramdisk /initrd-2.6.18-194.32.1.el5xen.img" xe vm-param-set uuid=[vm uuid] HVM-boot-policy="" xe vm-param-set uuid=[vm uuid] PV-bootloader=pygrub xe vbd-param-set uuid==[Virtual Block Device/VBD uuid] bootable=true Some things to note, I am running a VolGroup LVM ;) Anyways, after all these steps (which aren't much!) I boot the VM and it boots initial kernel just fine, however I am presented with this error: Boot Screen: device-mapper: dm-raid45: initialized v0.2594l Waiting for driver initialization. Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup00" not found Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Now my hints are that it cannot detect / because of the fact that when you change from HVM mode to PV it does something (not that obvious) When you make a SR (storage) on a HVM, you get it mounted to the guest os as /dev/hda. However in PV mode, this presents itself as /dev/xvda... Could this be the answer? and if so, how the heck to I implement it?? Update: So I have gotten a bit further in my quest, as it now detects the LVM's... To do this, I required to recompile the xen-kernel initrd image. Command: mkinitrd -v --builtin=xen_vbd --preload=xenblk initrd-2.6.18-194.32.1.el5xen.img 2.6.18-194.32.1.el5xen Now when I boot I get this: Boot Screen: Loading dm-raid45.ko module device-mapper: dm-raid45: initialized v0.2594l Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 3 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. mount: error mounting /dev/root on /sysroot as ext3: Device or resource busy Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Kernel panic - not syncing: Attempted to kill init!

  Read the article

• Adding Extra Hard Drives Debian Fdisk

  - by Belgin Fish

  well I just got a new server and it's a little different than what I'm use to, when I run cfdisk I get WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdd: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdd1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdf'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdf: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdf1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sde: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sde1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Usually it tells me which ones arn't partitioned and stuff, and I only have 6 drives in my server and there's 6 showing up here so I'm only assuming the first ones already mounted and formatted correctly? I'm not really sure if anyone would help me out here. Basically I just want to format and mount these drives :)

  Read the article

• How to use more than 3 virtual disks in Linux using CentOS and XenServer

  - by 010110110101

  I've attached 5 virtual disks to a Virtual Machine in Citrix XenServer. The VM has the xs-tools installed. Initially it said that it couldn't add so many disks. After I installed the xs-tools, it let me add all the disks. But /dev doesn't show all the disks. It shows these: /dev/xvda /dev/xvdb /dev/xvdc /dev/cdrom Perhaps it is bound by the limits of an IDE bus? (3 disks + CD-ROM) If so, how does one change the VM to use SCSI? Edit: According to the documentation: 2.6.3. VM Block Devices In the PV Linux case, block devices are passed through as PV devices. XenServer does not attempt to emulate SCSI or IDE, but instead provides a more suitable interface in the virtual environment in the form of xvd* devices. It is also possible to get an sd* device using the same mechanism, where the PV driver inside the VM takes over the SCSI device namespace. This is not desirable so it is best to use xvd* where possible for PV guests (this is the default for Debian and RHEL). For Windows or other fully virtualized guests, XenServer emulates an IDE bus in the form of an hd* device. When using Windows, installing the Citrix Tools for Virtual Machines installs a special PV driver that works in a similar way to Linux, except in the fully virtualized environment. Still, with 5 virtual disks attached, I don't see the other xvd devices. Edit #2: (attached requested info) Host Machine: XenServer 6.1 Linux version 2.6.32.43-0.4.1.xs1.6.10.777.170770xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed Apr 17 05:52:03 EDT 2013 Guest Machine: CentOS release 6.4 (Final) Linux version 2.6.32-358.6.2.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu May 16 20:59:36 UTC 2013 Output of 'fdisk -l' on Guest Machine: Note, the disk beyond the first 3 attached are not displaying -- there should be 4 100GB disks. (There are a total of 5 disks displayed in XenCenter -- 16GB, 100GB, 100GB, 100GB, 100GB) Disk /dev/xvdb: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfb6c95b9 Device Boot Start End Blocks Id System /dev/xvdb1 1 13054 104856223+ 83 Linux Disk /dev/xvda: 17.2 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e5f41 Device Boot Start End Blocks Id System /dev/xvda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvda2 64 2089 16264192 8e Linux LVM Disk /dev/xvdc: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed249ced Device Boot Start End Blocks Id System /dev/xvdc1 1 13054 104856223+ 83 Linux Disk /dev/mapper/vg_blue-lv_root: 14.6 GB, 14571012096 bytes 255 heads, 63 sectors/track, 1771 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_blue-lv_swap: 2080 MB, 2080374784 bytes 255 heads, 63 sectors/track, 252 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 I see that the Linux versions say SMP. The Guest VM doesn't say "xen" in the name. However, I have already run yum install kernel-xen. Could be a clue?

  Read the article

• How do you re-mount an ext3 fs readwrite after it gets mounted readonly from a disk error?

  - by cagenut

  Its a relatively common problem when something goes wrong in a SAN for ext3 to detect the disk write errors and remount the filesystem read-only. Thats all well and good, only when the SAN is fixed I can't figure out how to re-re-mount the filesystem read-write without rebooting. Behold: [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] [root@localhost ~]# mount /dev/mapper/mpath0 /mnt/foo [root@localhost ~]# touch /mnt/foo/blah All good, now I yank the LUN out from under it. [root@localhost ~]# touch /mnt/foo/blah [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system [root@localhost ~]# tail /var/log/messages Mar 18 13:17:33 localhost multipathd: sdb: tur checker reports path is down Mar 18 13:17:34 localhost multipathd: sdc: tur checker reports path is down Mar 18 13:17:35 localhost kernel: Aborting journal on device dm-2. Mar 18 13:17:35 localhost kernel: Buffer I/O error on device dm-2, logical block 1545 Mar 18 13:17:35 localhost kernel: lost page write due to I/O error on dm-2 Mar 18 13:17:36 localhost kernel: ext3_abort called. Mar 18 13:17:36 localhost kernel: EXT3-fs error (device dm-2): ext3_journal_start_sb: Detected aborted journal Mar 18 13:17:36 localhost kernel: Remounting filesystem read-only It only thinks its read-only, in reality its not even there. [root@localhost ~]# multipath -ll sdb: checker msg is "tur checker reports path is down" sdc: checker msg is "tur checker reports path is down" mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdb 8:16 [failed][faulty] \_ 2:0:0:1 sdc 8:32 [failed][faulty] [root@localhost ~]# ll /mnt/foo/ ls: reading directory /mnt/foo/: Input/output error total 20 -rw-r--r-- 1 root root 0 Mar 18 13:11 bar How it still remembers that 'bar' file being there... mystery, but not important right now. Now I re-present the LUN: [root@localhost ~]# tail /var/log/messages Mar 18 13:23:58 localhost multipathd: sdb: tur checker reports path is up Mar 18 13:23:58 localhost multipathd: 8:16: reinstated Mar 18 13:23:58 localhost multipathd: mpath0: queue_if_no_path enabled Mar 18 13:23:58 localhost multipathd: mpath0: Recovered to normal mode Mar 18 13:23:58 localhost multipathd: mpath0: remaining active paths: 1 Mar 18 13:23:58 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:58 localhost multipathd: dm-2: devmap already registered Mar 18 13:23:59 localhost multipathd: sdc: tur checker reports path is up Mar 18 13:23:59 localhost multipathd: 8:32: reinstated Mar 18 13:23:59 localhost multipathd: mpath0: remaining active paths: 2 Mar 18 13:23:59 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:59 localhost multipathd: dm-2: devmap already registered [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][enabled] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] Great right? It says [rw] right there. Not so fast: [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system OK, doesn't do it automatically, I'll just give it a little push: [root@localhost ~]# mount -o remount /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only The hell you are: [root@localhost ~]# mount -o remount,rw /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only Noooooooooo. I have tried all sorts of different mount/tune2fs/dmsetup commands and I cannot figure out how to get it to un-flag the block device as write-protected. Rebooting will fix it, but I'd much rather do it on-line. An hour of googling has gotten me nowhere either. Save me ServerFault.

  Read the article

• Can't open DDMS

  - by Emerald214

  When I open a standalone DDMS besides Eclipse, it generates the below error. hieund@hieund:~$ ddms 01:51:58 E/ddms: Could not open Selected VM debug port (8700). Make sure you do not have another instance of DDMS or of the eclipse plugin running. If it's being used by something else, choose a new port number in the preferences. (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 01:52:18 E/DDMS: device offline com.android.ddmlib.AdbCommandRejectedException: device offline at com.android.ddmlib.AdbHelper.setDevice(AdbHelper.java:736) at com.android.ddmlib.AdbHelper.executeRemoteCommand(AdbHelper.java:373) at com.android.ddmlib.Device.executeShellCommand(Device.java:364) at com.android.ddmuilib.SysinfoPanel.loadFromDevice(SysinfoPanel.java:159) at com.android.ddmuilib.SysinfoPanel.deviceSelected(SysinfoPanel.java:126) at com.android.ddmuilib.SelectionDependentPanel.deviceSelected(SelectionDependentPanel.java:52) at com.android.ddms.UIThread.selectionChanged(UIThread.java:1721) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:752) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:740) at com.android.ddmuilib.DevicePanel.access$1100(DevicePanel.java:56) at com.android.ddmuilib.DevicePanel$1.widgetSelected(DevicePanel.java:357) at org.eclipse.swt.widgets.TypedListener.handleEvent(Unknown Source) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Display.runDeferredEvents(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) 01:52:32 E/ddms: shutting down due to uncaught exception 01:52:32 E/ddms: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) Caused by: java.lang.ArrayIndexOutOfBoundsException: -1 at org.eclipse.jface.viewers.AbstractTableViewer$VirtualManager.resolveElement(AbstractTableViewer.java:100) at org.eclipse.jface.viewers.AbstractTableViewer$1.handleEvent(AbstractTableViewer.java:70) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Table.checkData(Unknown Source) at org.eclipse.swt.widgets.Table.cellDataProc(Unknown Source) at org.eclipse.swt.widgets.Display.cellDataProc(Unknown Source) at org.eclipse.swt.internal.gtk.OS._gtk_list_store_append(Native Method) at org.eclipse.swt.internal.gtk.OS.gtk_list_store_append(Unknown Source) at org.eclipse.swt.widgets.Table.setItemCount(Unknown Source) at org.eclipse.jface.viewers.TableViewer.doSetItemCount(TableViewer.java:217) at org.eclipse.jface.viewers.AbstractTableViewer.internalVirtualRefreshAll(AbstractTableViewer.java:661) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:635) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620) at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1430) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1365) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1328) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1428) at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:537) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1387) at com.android.ddmuilib.logcat.LogCatPanel$LogCatTableRefresherTask.run(LogCatPanel.java:1000) at org.eclipse.swt.widgets.RunnableLock.run(Unknown Source) ... 5 more I tried to change port for DDMS in Eclipse but it still doesn't work.

  Read the article

• Windows Server 2003 Terminal Server does not give out all available licenses

  - by Erwin Blonk

  I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Long story short, here is what it says now: Existing Windows 2000 Server, type:built-in [no licenses used, I add for for sake of being complete] Windows Server 2003 - Terminal Server Per Device CAL Token, type:open [none of 10 used] Windows Server 2003 - TS Per Device CAL, type:open [3 of 10 used] As I tried to explain, this is the end result after a few changes, most of which I can't directly connect to any action from my part. Only going to the activation procedure by phone seemed to directly effect the TS, resulting in the above configuration. Still, it is impossible to connect with more than 3 people, which is 1 up from the 2 that could connect yesterday. TS does say 7 licenses are avaible. Yet it won't give them out.

  Read the article

• Visual Studio 2010 Productivity Power Tool Extensions

  - by Latest Microsoft Blogs

  Last month I blogged about the Extension Manager that is built-into VS 2010 – as well as about a cool VS 2010 PowerCommands extension that provides some extra features for Visual Studio.  The Visual Studio 2010 Extension Manager provides an easy Read More......(read more)

  Read the article

• nouveau Unknown Fermi chipset

  - by Abood Mount

  I've installed a fresh install of Ubuntu 13.04 and whenever I start my laptop I get this output error [ 19.469816] nouveau ![ DEVICE][0000:01:00.0] unknown Fermi chipset [ 19.469846] nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x0d7000a2 [ 19.469870] nouveau E[ DRM] failed to create 0x80000080, -22 [ 19.470095] nouveau: probe of 0000:01:00.0 failed with error -22 I have Lenovo G580 with nVidia Geforce 710m.

  Read the article

• SIM to OIM Migration: A How-to Guide to Avoid Costly Mistakes (SDG Corporation)

  - by Darin Pendergraft

  In the fall of 2012, Oracle launched a major upgrade to its IDM portfolio: the 11gR2 release.  11gR2 had four major focus areas: More simplified and customizable user experience Support for cloud, mobile, and social applications Extreme scalability Clear upgrade path For SUN migration customers, it is critical to develop and execute a clearly defined plan prior to beginning this process.  The plan should include initiation and discovery, assessment and analysis, future state architecture, review and collaboration, and gap analysis.  To help better understand your upgrade choices, SDG, an Oracle partner has developed a series of three whitepapers focused on SUN Identity Manager (SIM) to Oracle Identity Manager (OIM) migration. In the second of this series on SUN Identity Manager (SIM) to Oracle Identity Manager (OIM) migration, Santosh Kumar Singh from SDG  discusses the proper steps that should be taken during the planning-to-post implementation phases to ensure a smooth transition from SIM to OIM. Read the whitepaper for Part 2: Download Part 2 from SDGC.com In the last of this series of white papers, Santosh will talk about Identity and Access Management best practices and how these need to be considered when going through with an OIM migration. If you have not taken the opportunity, please read the first in this series which discusses the Migration Approach, Methodology, and Tools for you to consider when planning a migration from SIM to OIM. Read the white paper for part 1: Download Part 1 from SDGC.com About the Author: Santosh Kumar Singh Identity and Access Management (IAM) Practice Leader Santosh, in his capacity as SDG Identity and Access Management (IAM) Practice Leader, has direct senior management responsibility for the firm's strategy, planning, competency building, and engagement deliverance for this Practice. He brings over 12+ years of extensive IT, business, and project management and delivery experience, primarily within enterprise directory, single sign-on (SSO) application, and federated identity services, provisioning solutions, role and password management, and security audit and enterprise blueprint. Santosh possesses strong architecture and implementation expertise in all areas within these technologies and has repeatedly lead teams in successfully deploying complex technical solutions. About SDG: SDG Corporation empowers forward thinking companies to strategize their future, realize their vision, and minimize their IT risk. SDG distinguishes itself by offering flexible business models to fit their clients’ needs; faster time-to-market with its pre-built solutions and frameworks; a broad-based foundation of domain experts, and deep program management expertise. (www.sdgc.com)

  Read the article

• Web Self Service installation on Windows

  - by Rajesh Sharma

  Web Self Service (WSS) installation on windows is pretty straight forward but you might face some issues if deployed under tomcat. Here's a step-by-step guide to install Oracle Utilities Web Self Service on windows.   Below installation steps are done on: Oracle Utilities Framework version 2.2.0 Oracle Utilities Application - Customer Care & Billing version 2.2.0 Application server - Apache Tomcat 6.0.13 on default port 6500 Other settings include: SPLBASE = C:\spl\CCBDEMO22 SPLENVIRON = CCBV22 SPLWAS = TCAT   Follow these steps for a Web Self Service installation on windows: Download Web Self Service application from edelivery.   Copy the delivery file Release-SelfService-V2.2.0.zip from the Oracle Utilities Customer Care and Billing version 2.2.0 Web Self Service folder on the installation media to a directory on your Windows box where you would like to install the application, in our case it's a temporary folder C:\wss_temp.   Setup application environment, execute splenviron.cmd -e <ENVIRON_NAME>   Create base folder for Self Service application named SelfService under %SPLEBASE%\splapp\applications   Install Oracle Utilities Web Self Service   C:\wss_temp\Release-SelfService-V2.2.0>install.cmd -d %SPLEBASE%\splapp\applications\SelfService   Web Self Service installation menu. Populate environment values for each item.   ******************************************************** Pick your installation options: ******************************************************** 1. Destination directory name for installation.             | C:\spl\CCBDEMO22\splapp\applications\SelfService 2. Web Server Host.                                         | CCBV22 3. Web Server Port Number.                                  | 6500 4. Mail SMTP Host.                                          | CCBV22 5. Top Product Installation directory.                      | C:\spl\CCBDEMO22 6.     Web Application Server Type.                         | TCAT 7.     When OAS: SPLWeb OC4J instance name is required.     | OC4J1 8.     When WAS: SPLWeb server instance name is required.   | server1   P. Process the installation. Each item in the above list should be configured for a successful installation. Choose option to configure or (P) to process the installation:  P   Option 7 and Option 8 can be ignored for TCAT.   Above step installs SelfService.war file in the destination directory. We need to explode this war file. Change directory to the installation destination folder, and   C:\spl\CCBDEMO22\splapp\applications\SelfService>jar -xf SelfService.war   Review SelfServiceConfig.properties and CMSelfServiceConfig.properties. Change any properties value within the file specific to your installation/site. Generally default settings apply, for this exercise assumes that WEB user already exists in your application database.   For more information on property file customization, refer to Oracle Utilities Web Self Service Configuration section in Customer Care & Billing Installation Guide.   Add context entry in server.xml located under tomcat-base folder C:\spl\CCBDEMO22\product\tomcatBase\conf   ... <!-- SPL Context -->           <Context path="" docBase="C:/spl/CCBDEMO22/splapp/applications/root" debug="0" privileged="true"/>           <Context path="/appViewer" docBase="C:/spl/CCBDEMO22/splapp/applications/appViewer" debug="0" privileged="true"/>           <Context path="/help" docBase="C:/spl/CCBDEMO22/splapp/applications/help" debug="0" privileged="true"/>           <Context path="/XAIApp" docBase="C:/spl/CCBDEMO22/splapp/applications/XAIApp" debug="0" privileged="true"/>           <Context path="/SelfService" docBase="C:/spl/CCBDEMO22/splapp/applications/SelfService" debug="0" privileged="true"/> ...   Add User in tomcat-users.xml file located under tomcat-base folder C:\spl\CCBDEMO22\product\tomcatBase\conf   <user username="WEB" password="selfservice" roles="cisusers"/>   Note the password is "selfservice", this is the default password set within the SelfServiceConfig.properties file with base64 encoding.   Restart the application (spl.cmd stop | start)   12.  Although Apache Tomcat version 6.0.13 does not come with the admin pack, you can verify whether SelfService application is loaded and running, go to following URL http://server:port/manager/list, in our case it'll be http://ccbv22:6500/manager/list Following output will be displayed   OK - Listed applications for virtual host localhost /admin:running:0:C:/tomcat/apache-tomcat-6.0.13/webapps/ROOT/admin /XAIApp:running:0:C:/spl/CCBDEMO22/splapp/applications/XAIApp /host-manager:running:0:C:/tomcat/apache-tomcat-6.0.13/webapps/host-manager /SelfService:running:0:C:/spl/CCBDEMO22/splapp/applications/SelfService /appViewer:running:0:C:/spl/CCBDEMO22/splapp/applications/appViewer /manager:running:1:C:/tomcat/apache-tomcat-6.0.13/webapps/manager /help:running:0:C:/spl/CCBDEMO22/splapp/applications/help /:running:0:C:/spl/CCBDEMO22/splapp/applications/root   Also ensure that the XAIApp is running.   Run Oracle Utilities Web Self Service application http://server:port/SelfService in our case it'll be  http://ccbv22:6500/SelfService   Still doesn't work? And you get '503 HTTP response' at the time of customer registration?     This is because XAI service is still unavailable. There is initialize.waittime set for a default value of 90 seconds for the XAI Application to come up.   Remember WSS uses XAI to perform actions/validations on the CC&B database.  

  Read the article

• JD Edwards World Reporting Made Easy with Real Time Reporting Tools from The GL Company

  Fred talks to Paul Yarwood, US Operations General Manager and Richard Crotty, North America Business Development Manager for The GL Company, an Oracle Certified Partner, and Denise Grills, Senior Director of Marketing and Product Strategy for Oracle's JD Edwards World products. They discuss how the finance department of JD Edwards World customers can have complete control over their management reporting with a true inquiry, consolidation, and reporting solution from The GL Company, freeing up the finance team from being dependent upon IT time and resources.

  Read the article

• Eine komplette Virtualisierungslandschaft auf dem eigenen Laptop – So geht’s

  - by Manuel Hossfeld

  Eine komplette Virtualisierungslandschaftauf dem eigenen Laptop – So geht’s Wenn man sich mit dem Virtualisierungsprodukt Oracle VM in der aktuellen Version 3.x näher befassen möchte, bietet es sich natürlich an, eine eigene Umgebung zu Lern- und Testzwecken zu installieren. Doch leichter gesagt als getan: Bei näherer Betrachtung der Architektur wird man schnell feststellen, dass mehrere Rechner benötigt werden, um überhaupt alle Komponenten abbilden zu können: Zum einen gilt es, den oder die OVM Server selbst zu installieren. Das ist recht leicht und schnell erledigt, aber da Oracle VM ein „Typ 1 Hypervisor ist“ - also direkt auf dem Rechner („bare metal“) installiert wird – ist der eigenen Arbeits-PC oder Laptop dafür recht ungeeignet. (Eine Dual-Boot Umgebung wäre zwar denkbar, aber recht unpraktisch.) Zum anderen wird auch ein Rechner benötigt, auf dem der OVM Manager installiert wird. Im Gegensatz zum OVM Server erfolgt dessen Installation nicht „bare metal“, sondern auf einem bestehenden Oracle Linux. Aber was tun, wenn man gerade keinen Linux-Server griffbereit hat und auch keine extra Hardware dafür opfern will? Möchte man alle Funktionen von Oracle VM austesten, so sollte man zusätzlich über einen Shared Storag everüfugen. Dieser kann wahlweise über NFS oder über ein SAN (per iSCSI oder FibreChannel) angebunden werden. Zwar braucht man zum Testen nicht zwingend entsprechende „echte“ Storage-Hardware, aber auch die „Simulation“ entsprechender Komponenten erfordert zusätzliche Hardware mit entsprechendem freien Plattenplatz.(Alternativ können auch fertige „Software Storage Appliances“ wie z.B. OpenFiler oder FreeNAS verwendet werden). Angenommen, es stehen tatsächlich keine „echte“ Server- und Storage Hardware zur Verfügung, so benötigt man für die oben genannten drei Punkte  drei bzw. vier Rechner (PCs, Laptops...) - je nachdem ob man einen oder zwei OVM Server starten möchte. Erfreulicherweise geht es aber auch mit deutlich weniger Aufwand: Wie bereits kurz im Blogpost anlässlich des letzten OVM-Releases 3.1.1 beschrieben, ist die aktuelle Version in der Lage, selbst vollständig innerhalb von VirtualBox als Gast zu laufen. Wer bei dieser „doppelten Virtualisierung“ nun an das Prinzip der russischen Matroschka-Puppen denkt, liegt genau richtig. Oracle VM VirtualBox stellt dabei gewissermaßen die äußere Hülle dar – und da es sich bei VirtualBox im Gegensatz zu Oracle VM Server um einen „Typ 2 Hypervisor“ handelt, funktioniert dieser Ansatz auch auf einem „normalen“ Arbeits-PC bzw. Laptop, ohne dessen eigentliche Betriebsystem komplett zu überschreiben. Doch das beste dabei ist: Die Installation der jeweiligen VirtualBox VMs muss man nicht selber durchführen. Der OVM Manager als auch der OVM Server stehen bereits als vorgefertigte „VirtualBox Appliances“ im Oracle Technology Network zum Download zur Verfügung und müssen im Grunde nur noch importiert und konfiguriert werden. Das folgende Schaubild verdeutlicht das Prinzip: Die dunkelgrünen Bereiche stellen jeweils Instanzen der eben erwähnten VirtualBox Appliances für OVM Server und OVM Manager dar. (Hier im Bild sind zwei OVM Server zu sehen, als Minimum würde natürlich auch einer genügen. Dann können aber viele Features wie z.B. OVM HA nicht ausprobieren werden.) Als cleveren Trick zur Einsparung einer weiteren VM für Storage-Zwecke hat Wim Coekaerts (Senior Vice President of Linux and Virtualization Engineering bei Oracle), der „Erbauer“ der VirtualBox Appliances, die OVM Manager Appliance bereits so vorbereitet, dass diese gleichzeitig als NFS-Share (oder ggf. sogar als iSCSI Target) dienen kann. Dies beschreibt er auch kurz auf seinem Blog. Die hellgrünen Ovale stellen die VMs dar, welche dann innerhalb einer der virtualisierten OVM Server laufen können. Aufgrund der Tatsache, dass durch diese „doppelte Virtualisierung“ die Fähigkeit zur Hardware-Virtualisierung verloren geht, können diese „Nutz-VMs“ demzufolge nur paravirtualisiert sein (PVM). Die hier in blau eingezeichneten Netzwerk-Schnittstellen sind virtuelle Interfaces, welche beliebig innerhalb von VirtualBox eingerichtet werden können. Wer die verschiedenen Netzwerk-Rollen innerhalb von Oracle VM im Detail ausprobieren will, kann hier natürlich auch mehr als zwei dieser Interfaces konfigurieren. Die Vorteile dieser Lösung für Test- und Demozwecke liegen auf der Hand: Mit lediglich einem PC bzw. Laptop auf dem VirtualBox installiert ist, können alle oben genannten Komponenten installiert und genutzt werden – genügend RAM vorausgesetzt. Als Minimum darf hier 8GB gelten. Soll auf der „Host-Umgebung“ (also dem PC auf dem VirtualBox läuft) nebenbei noch gearbeiten werden und/oder mehrere „Nutz-VMs“ in dieser simulierten OVM-Server-Umgebung laufen, empfehlen sich natürlich eher 16GB oder mehr. Da die nötigen Schritte zum Installieren und initialen Konfigurieren der Umgebung ausführlich in einem entsprechenden Paper beschrieben sind, möchte ich im Rest dieses Artikels noch einige zusätzliche Tipps und Details erwähnen, welche einem das Leben etwas leichter machen können: Um möglichst entstpannt und mit zusätzlichen „Sicherheitsnetz“ an die Konfiguration der Umgebung herangehen zu können, empfiehlt es sich, ausgiebigen Gebrauch von der in VirtualBox eingebauten Funktionalität der VM Snapshots zu machen. Dies ermöglicht nicht nur ein Zurücksetzen falls einmal etwas schiefgehen sollte, sondern auch ein beliebiges Wiederholen von bereits absolvierten Teilschritten (z.B. um eine andere Idee oder Variante der Umgebung auszuprobieren). Sowohl bei den gerade erwähnten Snapshots als auch bei den VMs selbst sollte man aussagekräftige Namen verwenden. So ist sichergestellt, dass man nicht durcheinander kommt und auch nach ein paar Wochen noch weiß, welche Umgebung man da eigentlich vor sich hat. Dies beinhaltet auch die genaue Versions- und Buildnr. des jeweiligen OVM-Releases. (Siehe dazu auch folgenden Screenshot.) Weitere Informationen und Details zum aktuellen Zustand sowie Zweck der jeweiligen VMs kann in dem oft übersehenen Beschreibungsfeld hinterlegt werden. Es empfiehlt sich, bereits VOR der Installation einen Notizzettel (oder eine Textdatei) mit den geplanten IP-Adressen und Namen für die VMs zu erstellen. (Nicht vergessen: Auch der Server Pool benötigt eine eigene IP.) Dabei sollte man auch nochmal die tatsächlichen Netzwerke der zu verwendenden Virtualbox-Interfaces prüfen und notieren. Achtung: Es gibt im Rahmen der Installation einige Passworte, die vom Nutzer gesetzt werden können – und solche, die zunächst fest eingestellt sind. Zu letzterem gehört das Passwort für den ovs-agent sowie den root-User auf den OVM Servern, welche beide per Default „ovsroot“ lauten. (Alle weiteren Passwort-Informationen sind in dem „Read me first“ Dokument zu finden, welches auf dem Desktop der OVM Manager VM liegt.) Aufpassen muss man ggf. auch in der initialen „Interview-Phase“ welche die VirtualBox VMs durchlaufen, nachdem sie das erste mal gebootet werden. Zu diesem Zeitpunkt ist nämlich auf jeden Fall noch die amerikanische Tastaturbelegung aktiv, so dass man z.B. besser kein „y“ und „z“ in seinem selbst gewählten Passwort verwendet. Aufgrund der Tatsache, dass wie oben erwähnt der OVM Manager auch gleichzeitig den Shared Storage bereitstellt, sollte darauf geachtet werden, dass dessen VM vor den OVM Server VMs gestartet wird. (Andernfalls „findet“ der dem OVM Server Pool zugrundeliegende Cluster sein sog. „Server Pool File System“ nicht.)

  Read the article

• Getting macro keys from a razer blackwidow to work on linux

  - by Journeyman Geek

  I picked up a razer blackwidow ultimate that has additional keys meant for macros that are set using a tool that's installed on windows. I'm assuming that these arn't some fancypants joojoo keys and should emit scancodes like any other keys. Firstly is there a standard way to check these scancodes in linux? Secondly how do i set these keys to do things in command line and x based linux setups? My current linux install is xubuntu 10.10, but i'll be switching to kubuntu once i have a few things fixed up. Ideally the answer should be generic and system-wide Things i have tried so far: showkeys from the built in kbd package (in a seperate vt) - macro keys not detected xev - macro keys not detected lsusb and evdev output this ahk script's output suggests the M keys are not outputting standard scancodes Things i need to try snoopy pro + reverse engineering (oh dear) Wireshark - preliminary futzing around seems to indicate no scancodes emitted when what i seem to think is the keyboard is monitored and keys pressed. Might indicate additional keys are a seperate device or need to be initialised somehow. Need to cross reference that with lsusb output from linux, in 3 scenarios - standalone, passed through to a windows VM without the drivers installed, and the same with. LSUSB only detects one device on a standalone linux install It might be useful to check if the mice use the same razer synapse driver , since that means some variation of razercfg might work (not detected. only seems to work for mice) Things i have Have worked out: In a windows system with the driver, the keyboard is seen as a keyboard and a pointing device. And said pointing device uses, in addition to your bog standard mouse drivers.. a driver for something called a razer synapse. Mouse driver seen in linux under evdev and lsusb as well Single Device under OS X apparently, though i have yet to try lsusb equivilent on that Keyboard goes into pulsing backlight mode in OS X upon initialisation with the driver. This should probably indicate that there's some initialisation sequence sent to the keyboard on activation. They are, in fact, fancypants joojoo keys. Extending this question a little I have access to a windows system so if i need to use any tools on that to help answer the question, its fine. I can also try it on systems with and without the config utility. The expected end result is still to make those keys usable on linux however. I also realise this is a very specific family of hardware. I would be willing to test anything that makes sense on a linux system if i have detailed instructions - this should open up the question to people who have linux skills, but no access to this keyboard The minimum end result i require I need these keys detected, and usable in any fashion on any of the current graphical mainstream ubuntu varients

  Read the article

• John Hitchcock of Pace Describes the Oracle Agile PLM Customer Experience

  John Hitchcock, Senior Manager of Configuration Management at Pace (formerly 2Wire, Inc.), sat down for an interview during Oracle's Innovation Summit with Kerrie Foy, Manager of PLM Product Marketing at Oracle. Learn why his organization upgraded to the latest version of Agile and expanded the footprint to achieve impressive savings and productivity gains across the global, networked product value-chain.

  Read the article

• John Hitchcock of Pace Describes the Oracle Agile PLM Customer Experience

  John Hitchcock, Senior Manager of Configuration Management at Pace (formerly 2Wire, Inc.), sat down for an interview during Oracle's Innovation Summit with Kerrie Foy, Manager of PLM Product Marketing at Oracle. Learn why his organization upgraded to the latest version of Agile and expanded the footprint to achieve impressive savings and productivity gains across the global, networked product value-chain.

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >