Search Results

Search found 448 results on 18 pages for 'reconnect'.

Page 17/18 | < Previous Page | 13 14 15 16 17 18  | Next Page >

  • How to interrupt a thread performing a blocking socket connect?

    - by Jason R
    I have some code that spawns a pthread that attempts to maintain a socket connection to a remote host. If the connection is ever lost, it attempts to reconnect using a blocking connect() call on its socket. Since the code runs in a separate thread, I don't really care about the fact that it uses the synchronous socket API. That is, until it comes time for my application to exit. I would like to perform some semblance of an orderly shutdown, so I use thread synchronization primitives to wake up the thread and signal for it to exit, then perform a pthread_join() on the thread to wait for it to complete. This works great, unless the thread is in the middle of a connect() call when I command the shutdown. In that case, I have to wait for the connect to time out, which could be a long time. This makes the application appear to take a long time to shut down. What I would like to do is to interrupt the call to connect() in some way. After the call returns, the thread will notice my exit signal and shut down cleanly. Since connect() is a system call, I thought that I might be able to intentionally interrupt it using a signal (thus making the call return EINTR), but I'm not sure if this is a robust method in a POSIX threads environment. Does anyone have any recommendations on how to do this, either using signals or via some other method? As a note, the connect() call is down in some library code that I cannot modify, so changing to a non-blocking socket is not an option.

    Read the article

  • NHibernate / multiple sessions and nested objects

    - by bernhardrusch
    We are using NHibernate in a rich client application. It is a pretty open application (the user searches for a dataset or creates a new one, changes the data and saves the data set. We leave the session open, because sometimes we have to lazy load some properties of the object (nested object structure). This means one big problem if we leave the session open, the db (MySQL) closes the connection and we are not able to find this out and it throws an exception (socket communication error) when accessing the database (we are thinking about testing the db connection before accessing the object - but this is not really optimal neither, the other option would be to set back the timeout of the db connection , but this just doesn't seem to well). So - is it possible to reconnect the session to a new database connection ? Another problem is it possible to get an object from one session and then re-attach it to another session ? (I often hear that session.lock should work for this - but this doesn't work so well in our application - so I ended up getting a "fresh" object from the session and copy the data over manually - which is a little bit cumbersome) Any ideas for this ?

    Read the article

  • UDP: Client started before Server

    - by Chris
    I have a bit of a glitch in my game just now, everything runs fine if the server is started before the client however when the client is started before the server they never connect. This is all UDP The problem happens when the client tries to call recvfrom() before the server has started, when this happens the client never finds the server and the server never finds the client. The resulted error is a wouldblock. If I stop the client using recvfrom and start the client before the server (the client is still sending data its just not receiving it) they both find each other no problem. Whats the solution for this? The way its seems just now is that the client cannot call recvfrom without a server being active or it all falls apart. Is there a check that can be done to see if data is sitting on a certain port(data the server would send)? Or is there a better way to do this? Some Code... Server Operation - UDPSocket is a class UDPSocket.Initialise(); UDPSocket.MakeNonBlocking(); UDPSocket.Bind(LOCALPORT); int n = UDPSocket.Receive(&thePacket); if (n > 0) UDPSocket.Send(&sendPacket); Client... UDP.Initialise(); UDP.MakeNonBlocking(); UDP.SetDestinationAddress(SERVERIP, SERVERPORT); serverStatus = UDP.Receive(&recvPacket); if (serverStatus > 0) { //Do some things UDP.Send(dPacket); //Try and reconnect with server } Thanks

    Read the article

  • Integrated webcam in lenovo t410 not working with 12.04

    - by kristianp
    I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

    Read the article

  • I can't shut down nor reboot without console

    - by jgomo3
    After update from 11.04 to 11.10 an wired conduct appears in my machine: Shutdown GUI methods (including reboot) cause only a log off, and in the login screen, shutdown nor reboot options do anything (if you wonder, reboot appears in the shutdown dialog). The only way i can reboot or shutdown is trough console sudo shutdown -h now or sudo reboot. This is OK for me, but not for the rest of the users. How to fix this? Update The syslog output when select shutdown from my desktop is: AptDaemon: INFO: Quitting due to inactivity AptDaemon: INFO: Quitting was requested CRON[5095]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) CRON[5094]: (root) MAIL (mailed 1 byte of output; but got status 0x00ff, #012) kernel: [17027.614974] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.616510] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.618037] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.619557] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.621046] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.621051] psmouse.c: issuing reconnect request acpid: client 1032[0:0] has disconnected acpid: client connected from 1032[0:0] acpid: 1 client rule loaded gnome-session[1836]: WARNING: Unable to stop system: Authorization is required acpid: client 1032[0:0] has disconnected acpid: client connected from 6055[0:0] acpid: 1 client rule loaded rtkit-daemon[1313]: Successfully made thread 6134 of process 6134 (n/a) owned by '119' high priority at nice level -11. rtkit-daemon[1313]: Supervising 4 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6139 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 5 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6140 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 6 threads of 2 processes of 2 users. I suspect that the line gnome-session[1836]: WARNING: Unable to stop system: Authorization is required is related to the issue. When selecting shutdown from the login screen, the output is the same from the line pointed. This is the output: gnome-session[1836]: WARNING: Unable to stop system: Authorization is required acpid: client 1032[0:0] has disconnected acpid: client connected from 6055[0:0] acpid: 1 client rule loaded rtkit-daemon[1313]: Successfully made thread 6134 of process 6134 (n/a) owned by '119' high priority at nice level -11. rtkit-daemon[1313]: Supervising 4 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6139 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 5 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6140 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 6 threads of 2 processes of 2 users. acpid: client 6055[0:0] has disconnected acpid: client connected from 6055[0:0] acpid: 1 client rule loaded

    Read the article

  • How to Draw Lines on the Screen

    - by Geertjan
    I've seen occasional questions on mailing lists about how to use the NetBeans Visual Library to draw lines, e.g., to make graphs or diagrams of various kinds by drawing on the screen. So, rather than drag/drop causing widgets to be added, you'd want widgets to be added on mouse clicks, and you'd want to be able to connect those widgets together somehow. Via the code below, you'll be able to click on the screen, which causes a dot to appear. When you have multiple dots, you can hold down the Ctrl key and connect them together. A guiding line appears to help you position the dots exactly in line with each other. When you go to File | Print, you'll be able to preview and print the diagram you've created. A picture that speaks 1000 words: Here's the code: public final class PlotterTopComponent extends TopComponent { private final Scene scene; private final LayerWidget baseLayer; private final LayerWidget connectionLayer; private final LayerWidget interactionLayer; public PlotterTopComponent() { initComponents(); setName(Bundle.CTL_PlotterTopComponent()); setToolTipText(Bundle.HINT_PlotterTopComponent()); setLayout(new BorderLayout()); this.scene = new Scene(); this.baseLayer = new LayerWidget(scene); this.interactionLayer = new LayerWidget(scene); this.connectionLayer = new LayerWidget(scene); scene.getActions().addAction(new SceneCreateAction()); scene.addChild(baseLayer); scene.addChild(interactionLayer); scene.addChild(connectionLayer); add(scene.createView(), BorderLayout.CENTER); putClientProperty("print.printable", true); } private class SceneCreateAction extends WidgetAction.Adapter { @Override public WidgetAction.State mousePressed(Widget widget, WidgetAction.WidgetMouseEvent event) { if (event.getClickCount() == 1) { if (event.getButton() == MouseEvent.BUTTON1 || event.getButton() == MouseEvent.BUTTON2) { baseLayer.addChild(new BlackDotWidget(scene, widget, event)); repaint(); return WidgetAction.State.CONSUMED; } } return WidgetAction.State.REJECTED; } } private class BlackDotWidget extends ImageWidget { public BlackDotWidget(Scene scene, Widget widget, WidgetAction.WidgetMouseEvent event) { super(scene); setImage(ImageUtilities.loadImage("org/netbeans/plotter/blackdot.gif")); setPreferredLocation(widget.convertLocalToScene(event.getPoint())); getActions().addAction( ActionFactory.createExtendedConnectAction( connectionLayer, new BlackDotConnectProvider())); getActions().addAction( ActionFactory.createAlignWithMoveAction( baseLayer, interactionLayer, ActionFactory.createDefaultAlignWithMoveDecorator())); } } private class BlackDotConnectProvider implements ConnectProvider { @Override public boolean isSourceWidget(Widget source) { return source instanceof BlackDotWidget && source != null ? true : false; } @Override public ConnectorState isTargetWidget(Widget src, Widget trg) { return src != trg && trg instanceof BlackDotWidget ? ConnectorState.ACCEPT : ConnectorState.REJECT; } @Override public boolean hasCustomTargetWidgetResolver(Scene arg0) { return false; } @Override public Widget resolveTargetWidget(Scene arg0, Point arg1) { return null; } @Override public void createConnection(Widget source, Widget target) { ConnectionWidget conn = new ConnectionWidget(scene); conn.setTargetAnchor(AnchorFactory.createCircularAnchor(target, 10)); conn.setSourceAnchor(AnchorFactory.createCircularAnchor(source, 10)); connectionLayer.addChild(conn); } } ... ... ... Note: The code above was written based on the Visual Library tutorials on the NetBeans Platform Learning Trail, in particular via the "ConnectScene" sample in the "test.connect" package, which is part of the very long list of Visual Library samples referred to in the Visual Library tutorials on the NetBeans Platform Learning Trail. The next steps are to add a reconnect action and an action to delete a dot by double-clicking on it. Would be interesting to change the connecting line so that the length of the line were to be shown, i.e., as you draw a line from one dot to another, you'd see a constantly changing number representing the current distance of the connecting line. Also, once lines are connected to form a rectangle, would be cool to be able to write something within that rectangle. Then one could really create diagrams, which would be pretty cool.

    Read the article

  • What's wrong with my wireless?

    - by dazzle
    I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

    Read the article

  • ORE graphics using Remote Desktop Protocol

    - by Sherry LaMonica
    Oracle R Enterprise graphics are returned as raster, or bitmap graphics. Raster images consist of tiny squares of color information referred to as pixels that form points of color to create a complete image. Plots that contain raster images render quickly in R and create small, high-quality exported image files in a wide variety of formats. However, it is a known issue that the rendering of raster images can be problematic when creating graphics using a Remote Desktop connection. Raster images do not display in the windows device using Remote Desktop under the default settings. This happens because Remote Desktop restricts the number of colors when connecting to a Windows machine to 16 bits per pixel, and interpolating raster graphics requires many colors, at least 32 bits per pixel.. For example, this simple embedded R image plot will be returned in a raster-based format using a standalone Windows machine:  R> library(ORE) R> ore.connect(user="rquser", sid="orcl", host="localhost", password="rquser", all=TRUE)  R> ore.doEval(function() image(volcano, col=terrain.colors(30))) Here, we first load the ORE packages and connect to the database instance using database login credentials. The ore.doEval function executes the R code within the database embedded R engine and returns the image back to the client R session. Over a Remote Desktop connection under the default settings, this graph will appear blank due to the restricted number of colors. Users who encounter this issue have two options to display ORE graphics over Remote Desktop: either raise Remote Desktop's Color Depth or direct the plot output to an alternate device. Option #1: Raise Remote Desktop Color Depth setting In a Remote Desktop session, all environment variables, including display variables determining Color Depth, are determined by the RCP-Tcp connection settings. For example, users can reduce the Color Depth when connecting over a slow connection. The different settings are 15 bits, 16 bits, 24 bits, or 32 bits per pixel. To raise the Remote Desktop color depth: On the Windows server, launch Remote Desktop Session Host Configuration from the Accessories menu.Under Connections, right click on RDP-Tcp and select Properties.On the Client Settings tab either uncheck LimitMaximum Color Depth or set it to 32 bits per pixel. Click Apply, then OK, log out of the remote session and reconnect.After reconnecting, the Color Depth on the Display tab will be set to 32 bits per pixel.  Raster graphics will now display as expected. For ORE users, the increased color depth results in slightly reduced performance during plot creation, but the graph will be created instead of displaying an empty plot. Option #2: Direct plot output to alternate device Plotting to a non-windows device is a good option if it's not possible to increase Remote Desktop Color Depth, or if performance is degraded when creating the graph. Several device drivers are available for off-screen graphics in R, such as postscript, pdf, and png. On-screen devices include windows, X11 and Cairo. Here we output to the Cairo device to render an on-screen raster graphic.  The grid.raster function in the grid package is analogous to other grid graphical primitives - it draws a raster image within the current plot's grid.  R> options(device = "CairoWin") # use Cairo device for plotting during the session R> library(Cairo) # load Cairo, grid and png libraries  R> library(grid) R> library(png)  R> res <- ore.doEval(function()image(volcano,col=terrain.colors(30))) # create embedded R plot  R> img <- ore.pull(res, graphics = TRUE)$img[[1]] # extract image  R> grid.raster(as.raster(readPNG(img)), interpolate = FALSE) # generate raster graph R> dev.off() # turn off first device   By default, the interpolate argument to grid.raster is TRUE, which means that what is actually drawn by R is a linear interpolation of the pixels in the original image. Setting interpolate to FALSE uses a sample from the pixels in the original image.A list of graphics devices available in R can be found in the Devices help file from the grDevices package: R> help(Devices)

    Read the article

  • passwd ldap request to ActiveDirectory fails on half of 2500 users

    - by groovehunter
    We just setup ActiveDirectory in my company and imported all linux users and groups. On the linux client: (configured to ask ldap in nsswitch.conf): If i do a common ldapsearch to the AD ldap server i get the complete number of about 2580 users. But if i do this it only gets a part of all users, 1221 in number: getent passwd | wc -l Running it with strace shows kind of attempt to reconnect My ideas were: Does the linux authentication procedure run ldapsearch with a parameter incompatible to AD ldap ? Or probably it is a encoding issue. The windows user are entered in AD with all kind of characters. Maybe someone could shed light on this and give a hint how to debug that further!? Here's our ldap.conf host audc01.mycompany.de audc03.mycompany.de base ou=location,dc=mycompany,dc=de ldap_version 3 binddn cn=manager,ou=location,dc=mycompany,dc=de bindpw Password timelimit 120 idle_timelimit 3600 nss_base_passwd cn=users,cn=import,ou=location,dc=mycompany,dc=de?sub nss_base_group ou=location,dc=mycompany,dc=de?sub # RFC 2307 (AD) mappings nss_map_objectclass posixAccount User # nss_map_objectclass shadowAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute cn sAMAccountName # Display Name nss_map_attribute gecos cn ## nss_map_attribute homeDirectory unixHomeDirectory nss_map_attribute loginShell msSFU30LoginShell # PAM attributes pam_login_attribute sAMAccountName # Location based login pam_groupdn CN=Location-AU-Login,OU=au,OU=Location,DC=mycompany,DC=de pam_member_attribute msSFU30PosixMember ## pam_lookup_policy yes pam_filter objectclass=User nss_initgroups_ignoreusers avahi,avahi-autoipd,backup,bin,couchdb,daemon,games,gdm,gnats,haldaemon,hplip,irc,kernoops,libuuid,list,lp,mail,man,messagebus,news,proxy,pulse,root,rtkit,saned,speech-dispatcher,statd,sync,sys,syslog,usbmux,uucp,www-data and here the stacktrace from strace getent passwd poll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP}], 1, 120000) = 1 ([{fd=4, revents=POLLIN}]) read(4, "0\204\0\0\0A\2\1", 8) = 8 read(4, "\4e\204\0\0\0\7\n\1\0\4\0\4\0\240\204\0\0\0+0\204\0\0\0%\4\0261.2."..., 63) = 63 stat64("/etc/ldap.conf", {st_mode=S_IFREG|0644, st_size=1151, ...}) = 0 geteuid32() = 12560 getsockname(4, {sa_family=AF_INET, sin_port=htons(60334), sin_addr=inet_addr("10.1.35.51")}, [16]) = 0 getpeername(4, {sa_family=AF_INET, sin_port=htons(389), sin_addr=inet_addr("10.1.5.81")}, [16]) = 0 time(NULL) = 1297684722 rt_sigaction(SIGPIPE, {SIG_DFL, [], 0}, NULL, 8) = 0 munmap(0xb7617000, 1721) = 0 close(3) = 0 rt_sigaction(SIGPIPE, {SIG_IGN, [], 0}, {SIG_DFL, [], 0}, 8) = 0 rt_sigaction(SIGPIPE, {SIG_DFL, [], 0}, NULL, 8) = 0 rt_sigaction(SIGPIPE, {SIG_IGN, [], 0}, {SIG_DFL, [], 0}, 8) = 0 write(4, "0\5\2\1\5B\0", 7) = 7 shutdown(4, 2 /* send and receive */) = 0 close(4) = 0 shutdown(-1, 2 /* send and receive */) = -1 EBADF (Bad file descriptor) close(-1) = -1 EBADF (Bad file descriptor) exit_group(0) = ?

    Read the article

  • Directory listing through FTPS (TLS) is not working

    - by Aron Rotteveel
    We recently switched our server to require TLS for every connection. This is working flawlessly so far, but one of our clients is having problems. Some facts: Server uses Pure-FTPD Server has a passive port range configured Server has no firewall limitations regarding the FTP Client uses WS FTP Client is behind a router Client connects to the same IP as every other, using PASSIVE mode All other clients have no trouble connecting Because of the TLS requirement, connecting using ACTIVE mode is almost not possible, but PASSIVE is working fine for everyone except this specific client. It seems that he is able to connect, but once a LIST command is performed, things go wrong. Log: Finding Host <clienthost> ... Connecting to <serverip:21> Connected to <serverip:21> in 0.020000 seconds, Waiting for Server Response Initializing SSL Session ... 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 220-You are user number 5 of 50 allowed. 220-Local time is now 22:14. Server port: 21. 220-This is a private system - No anonymous login 220-IPv6 connections are also welcome on this server. 220 You will be disconnected after 15 minutes of inactivity. AUTH TLS 234 AUTH TLS OK. SSL session NOT set for reuse SSL Session Started. Host type (1): Automatic Detect USER <user> 331 User <user> OK. Password required PASS (hidden) 230-User <user> has group access to: <user> 230 OK. Current restricted directory is / SYST 215 UNIX Type: L8 Host type (2): Unix (Standard) PBSZ 0 200 PBSZ=0 PROT P 200 Data protection level set to "private" PWD 257 "/" is your current location CWD /public_html 250 OK. Current directory is /public_html PWD257 "/public_html" is your current location TYPE A 200 TYPE is now ASCII PASV 227 Entering Passive Mode (<serverip>,132,100) connecting data channel to <serverip>:132,100(33892) Substituting connection address <serverip> for private address <serverip> from PASV Using external address <customer ext. ip> instead of local address <customer int. ip> for PORT command PORT 82,161,56,225,195,181 200 PORT command successful LIST Error reading response from server. It appears that the connection is dead. Attempting reconnect... Any help is appreciated.

    Read the article

  • SQL Server High Availability - Mirroring with MSCS?

    - by David
    I'm looking at options for high-availability for my SQL Server-powered application. The requirements are: HA protection from storage failure. Data accessibility when one of the DB servers is undergoing software updates (e.g. planned outage for Windows Update / SQL Server service-packs). Must not involve much in the way of hardware procurement. The application is an ASP.NET web application. The web application's users have their own database instances. I've seen two main options: SQL Server failover clustering, and SQL Server mirroring. I understand that SQL Server Failover Clustering requires the purchasing of a shared disk array and doesn't offer any protection if the shared storage goes down (so the documentation recommends to set up a Mirroring between two clusters). Database Mirroring seems the cheaper option (as it only requires two database servers and a simple witness box) - but I've heard it doesn't work well when you have a large number of databases. The application I'm developing involves giving each client their own database for their application - there could be hundreds of databases. Setting up the mirroring is no problem thanks to the automation systems we have in place. My final point concerns how failover works with respect to client connections - SQL Server Failover Clustering uses MSCS which means that the cluster is invisible to clients - a connection attempt might fail during the failover, but a simple reconnect will have it working again. However mirroring, as far as I know, requires that the client be aware of the mirrored partners: if the client cannot connect to the primary server then it tries the secondary server. I'm wondering how this work with respect to Connection Pooling in ASP.NET applications - does the client connection failovering mean that there's a potential 2-second (assuming 2000ms TCP timeout policy) pause when the connection pool tries the primary server on every connection attempt? I read somewhere that Mirroring can be used on top of MSCS which means that the client does not need to be aware of mirroring (so there wouldn't be any potential delays during connection, and also that no changes would need to be made to the client, not even the connection string) - however I'm finding it hard to get documentation or white papers on this approach. But if true, then it means the best method is then Mirroring (for HA) with MSCS (for client ignorance and connection performance). ...but how does this scale to a server instance that might contain hundreds of mirrored databases?

    Read the article

  • web services access not being reached thru the web browser

    - by Tony
    I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

    Read the article

  • PHP 5.3 Not Logging

    - by BHare
    I have set error_log = "/var/log/apache2/php_errors.log" and made sure errors were being logged. I have set the file to be owned by the www-data owner and group and even set the permissions to 777. I have confirmed with phpinfo() that the error_log is correctly set, however The logging still only happens in my vhost's apache error log. The following is my php.ini for 5.3.3-7 on Debian Squeeze Apache 2: The top is populated with comments on what I have been interested, or have changed. I have deleted all comments to save space. Full versions here: http://pastebin.com/AhWLiQBR [PHP] ;short_open_tag = On ;allow_call_time_pass_reference = On ;error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED ;display_errors = On ;display_startup_errors = Off ;log_errors = On ;html_errors = On error_log = "/var/log/apache2/php_errors.log" engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = On safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED display_errors = On display_startup_errors = Off log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = On variables_order = "GPCS" request_order = "GPC" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 100M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_tmp_dir = /tmp upload_max_filesize = 100M max_file_uploads = 20 allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Pdo_mysql] pdo_mysql.cache_size = 2000 pdo_mysql.default_socket= [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [Interbase] ibase.allow_persistent = 1 ibase.max_persistent = -1 ibase.max_links = -1 ibase.timestampformat = "%Y-%m-%d %H:%M:%S" ibase.dateformat = "%Y-%m-%d" ibase.timeformat = "%H:%M:%S" [MySQL] mysql.allow_local_infile = On mysql.allow_persistent = On mysql.cache_size = 2000 mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_persistent = -1 mysqli.allow_persistent = On mysqli.max_links = -1 mysqli.cache_size = 2000 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [mysqlnd] mysqlnd.collect_statistics = On mysqlnd.collect_memory_statistics = Off [OCI8] [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 0 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] [ldap] ldap.max_links = -1 [mcrypt] [dba]

    Read the article

  • Wireless 802.11x Disconnects

    - by BillP3rd
    I've looked at (and read) all of the similar questions and none of them get exactly to the issue I'm having at home. I have an 802.11g access point (two, actually, with different SSIDs and on different channels). One is an Airlink AR525W. The other is a Linksys WRT54G v.2. The issue is that at random times, my laptop will lose its wireless connection. This occurs regardless of which access point I'm connected to. When I lose the connection, the affected AP no longer appears in the list of available APs. Also, it doesn't have anything to do with walls or distance. It can happen within 30' and when my laptop is literally within line-of-sight. When it loses the signal, it can take from 10 to 30 minutes to reconnect and it always will without intervention. I've done all the “standard” things to troubleshoot the problem and it has improved. For example, I surveyed other access points in my vicinity and have selected a different channel for each of my APs that no one else nearby is using. Both APs are configured WPA2/AES. I'm down to wondering [Note: This is not a shopping question. I'm not buying a new AP] if the fact that I didn't drop two bills on my APs and instead opted for more modest solutions has anything to do with it? I've oft wondered why anyone would go for the high-end AP when they didn't have to. Also, I am aware of DD-WRT and have chosen not to go there because only one of my APs is supported. Oh, and one final thing. It an HP x64 laptop running Windows 7 Ultimate. The wireless interface is an Atheros AR9285 802.11b/g/n WiFi Adapter. All the latest drivers and service packs have been applied. It did the same thing with my old laptop (a Lenovo) so I don't the problem is in the laptop. It's really annoying when this happens and suggestions of things I haven't thought of or may have overlooked (No, really. As unlikely as it is, I admit that I may have overlooked something :-)) are appreciated.

    Read the article

  • Wake On Lan only works on first boot, not sequent ones

    - by sp3ctum
    I have converted my old Dell Latitude D410 laptop to a server for tinkering. It is running an updated Debian Squeeze (6) with a Xen enabled kernel (I want to toy with virtual machines later on). I am running it 'headless' via an ethernet connection. I am struggling to enable Wake On Lan for the box. I have enabled the setting in the BIOS, and it works nicely, but only for the first time after the power cord is plugged in. Here is my test: Plug in power cord, don't boot yet Send magic Wake On Lan packet from test machine (Ubuntu) using the wakeonlan program Server expected to start (does every time) Once server has booted, log in via ssh and shut it down via the operating system After shutdown, wake server up via WOL again (fails every time) Some observations: Right after step 1 I can see the integrated NIC has a light on. I deduce this means the NIC gets adequate power and that the ethernet cable is connected to my switch. This light is not on after step 4 (the shutdown stage). The light becomes back on after I disconnect and reconnect the power cord, after which WOL works as well. After step 4 I can verify that wake on lan is enabled via the ethtool program (repeatable each time) This blog post suggested the problem may lay in the fact the motherboard might not be giving adequate power to the NIC after shutdown, so I copied an acpitool script that supposedly should signal the system to give the needed power to the card when shut down. Obviously it did not fix my issue. I have included the relevant power settings in the paste below. I have tried different combinations of parameters of shutdown (the program) options, as well as the poweroff program. I even tried "telinit 0", which I figured would do the most direct boot via software. If I keep the laptop's power button pressed down and do a hard boot this way, the light on the ethernet port stays lit and a WOL is possible. I copied a bunch of hopefully useful information in this paste I have tried this with the laptop battery connected and without it. I get the same result. Promptly pressing the power button causes the system to shut down with the message "The system is going down for system halt NOW!", and WOL is still unsuccessful.

    Read the article

  • apcupsd on Linux does not report on APC BackUPS Pro 900

    - by lserni
    From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

    Read the article

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it at the neighborhood computer junk store). I am using it at home (and in fact am using it at this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to it by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other IP service, e.g., POP3) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Power cycling the router fixes it. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anybody else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK because a previous Linksys died of apparant heating problems, how many do I have to cycle through before I get something that works and is long-term stable?). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy? EDIT: Happened again, while I was working on the wireless Vista laptop. (Seems like once an hour?) I was a little more careful this time. The wireless laptop can ping it. It can't get the login screen. I visited the LAN-connected PC (takes me a minute to walk from the laptop to the PC at the other end of the house), and attempted to visit a random web page. Surprise, that worked! And, now, after a minute walking back to the laptop, I can reconnect the wireless laptop, and get to the login page from it. Strange the time/date has been reset back to 2002. (I'll swear I set it and saved the system configuration after updating the firmware; it made me redo every other bit of reconfiguration again). Is there something funny about wireless leases expiring? The router says the leases it is handing out are good for 180 minutes, and the delay-to-inaccessible was only about an hour. The DSL connection seems to have a 10 minute lease.

    Read the article

  • Broadcom HT1100 SATA controller not working properly with 1TB drives

    - by Jeff C
    I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

    Read the article

  • WiFi signal is lost every 3 minutes

    - by Software Monkey
    For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

    Read the article

  • What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

    - by Software Monkey
    I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

    Read the article

  • How to make Windows 7 use the internet connection that I specify

    - by user138957
    I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

    Read the article

  • web services access not being reached thru the web browser [closed]

    - by Tony
    I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

    Read the article

  • Windows 7 immediately disconnects a USB drive

    - by Daniel Saner
    I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

    Read the article

  • Unable to install Xdebug

    - by burnt1ce
    I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output &amp; &amp; asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

    Read the article

  • Map a Network Drive from XP to Windows 7

    - by Mysticgeek
    We’ve received a lot of questions about mapping a drive from XP to Windows 7 to access data easily. Today we look at how to map a drive in Windows 7, and how to map to an XP drive from Windows 7. With the new Homegroup feature in Windows 7, it makes sharing data between computers a lot easier. But you might need to map a network drive so you can go directly into a folder to access its contents. Mapping a network drive may sound like “IT talk”, but the process is fairly easy. Map Network Drive in Windows 7 Note: All of the computers used in this article are part of the same workgroup on a home network. In this first example we’re mapping to another Windows 7 drive on the network. Open Computer and from the toolbar click on Map Network Drive. Alternately in Computer you can hit “Alt+T” to pull up the toolbar and click on Tools \ Map Network Drive. Now give it an available drive letter, type in the path or browse to the folder you want to map to. Check the box next to Reconnect at logon if you want it available after a reboot, and click Finish. If both machines aren’t part of the same Homegroup, you may be prompted to enter in a username and password. Make sure and check the box next to Remember my credentials if you don’t want to log in every time to access it. The drive will map and the contents of the folder will open up. When you look in Computer, you’ll see the drive under network location. This process works if you want to connect to a server drive as well. In this example we map to a Home Server drive. Map an XP Drive to Windows 7 There might be times when you need to map a drive on an XP machine on your network. There are extra steps you’ll need to take to make it work however. Here we take a look at the problem you’ll encounter when trying to map to an XP machine if things aren’t set up correctly. If you try to browse to your XP machine you’ll see a message that you don’t have permission. Or if you try to enter in the path directly, you’ll be prompted for a username and password, and the annoyance is, no matter what credentials you put in, you can’t connect. To solve the problem we need to set up the Windows 7 machine as a user on the XP machine and make them part of the Administrators group. Right-click My Computer and select Manage. Under Computer Management expand Local Users and Groups and click on the Users folder. Right-click an empty area and click New User. Add in the user credentials, uncheck User must change password at next logon, then check Password never expires then click Create. Now you see the new user you created in the list. After the user is added you might want to reboot before proceeding to the next step.   Next we need to make the user part of the Administrators group. So go back into Computer Management \ Local Users and Groups \ Groups then double click on Administrators. Click the Add button in Administrators Properties window. Enter in the new user you created and click OK. An easy way to do this is to enter the name of the user you created then click Check Names and the path will be entered in for you. Now you see the user as a member of the Administrators group. Back on the Windows 7 machine we’ll start the process of mapping a drive. Here we’re browsing to the XP Media Center Edition machine. Now we can enter in the user name and password we just created. If you only want to access specific shared folders on the XP machine you can browse to them. Or if you want to map to the entire drive, enter in the drive path where in this example it’s “\\XPMCE\C$” –Don’t forget the “$” sign after the local drive letter. Then login… Again the contents of the drive will open up for you to access. Here you can see we have two drives mapped. One to another Windows 7 machine on the network, and the other one to the XP computer.   If you ever want to disconnect a drive, just right-click on it and then Disconnect. There are several scenarios where you might want to map a drive in Windows 7 to access specific data. It takes a little bit of work but you can map to an XP drive from Windows 7 as well. This comes in handy where you have a network with different versions of Windows running on it. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPMake Vista Index Your Network ConnectionsEasily Backup & Import Your Wireless Network Settings in Windows 7Quickly Open Network Connections List in Windows 7 or VistaHow To Find Drives Easily with Desk Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

    Read the article

< Previous Page | 13 14 15 16 17 18  | Next Page >