Search Results

Search found 16530 results on 662 pages for 'off shore'.

Page 170/662 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

  • WiFi signal is lost every 3 minutes

    - by Software Monkey
    For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • How do I change the quickix title (status bar) in vim?

    - by romeovs
    I'm have the following makeprg to compile my tex files in vim: setlocal makeprg=pdflatex\ \-file\-line\-error\ \-shell\-escape\ \-interaction=nonstopmode\ $*\\\|\ tee\ \/dev\/tty\ \\\|\ grep\ \-P\ ':\\d{1,5}:\ ' which gives me good results (errors displayed properly, tex compilation shown while busy,...) Yet there is one thing I'm not pleased off: when there are errors and the quickfix window pops up, its status bar is cluttered up with the makeprg string: pdflatex\ \-file\-line\-error\ \-shell\-escape\ \-interaction=nonstopmode\ $*\\\|\ tee\ \/dev\/tty\ \\\|\ grep\ \-P\ ':\\d{1,5}:\ ' Is there a way of changing the quickfix title/statusbar?

    Read the article

  • Easy management of multiple connections

    - by pistacchio
    Hi, on a Windows 7 machine I need to switch back and forth two connections: the LAN connection (that works behind a proxy) and a wireless connection via a USB modem. This requires every time to activate / deactivate two connections in the manager and switch on / off the LAN settings. I don't think there is some way to keep two connections alive and specify which one to use based on the program, but my question is: is there a simple little utility that makes switching the connection one-click easy and fast? Thanks

    Read the article

  • New computer crashing

    - by Alister
    I've just built a new computer and it crashes occasionally - it just switches off and then restarts and I'm not sure about the best way to diagnose the problem. All the components are seated nicely and nothing seems to be overheating, the bios is set to fail-safe. What tools could I use to track down any possible issues? I've run memtest86+ with no problems. It's running Win7 Ultimate.

    Read the article

  • IE9 freezes with Protected Mode enabled

    - by Peter Wone
    After a disk failure and a new build of Win7, IE9 locks up on most web pages including Bing. Running it as Admin works, and turning off Protected Mode also works. Neither of these was necessary prior to the rebuild and examination of colleagues' workstation config show that it's only my workstation with this quirk. Can anyone suggest a remedy? I have tried bcdedit /set {current} nx AlwaysOff and a reboot, with no effect.

    Read the article

  • Download all Flickr sets/images?

    - by Marcus
    We'd like to download all our Flickr photos & sets to iPhoto or just to a PC directory so we can sync our photos & sets to our iPhones (and possibly get off Flickr). Is there a way to do this? Update: We do have a pro account right now.

    Read the article

  • Blue Screen error BAD_POOL_CALLER 0x000000C2

    - by Adam
    My computer was working fine for months but now when it starts up the Windows XP screen comes up to show the computer is starting up but then a blue screen appears with the error below: BAD_POOL_CALLER STOP: 0x000000C2 (0x00000043, 0xDB3C6000, 0x00000000, 0x00000000) I have tried booting off the Windows XP CD and trying to do a re-installation but when the setup try's to query the disk the setup crashes and exists. I've run diags and that says everything is fine. Any ideas?

    Read the article

  • Auto Forward mails to gmail from Outlook

    - by Jaison
    I have a highly secured computer windows server 2003 where my outlook express is configured, i want to forward all the mails coming from Outlook to gmail. I put some auto forward rule in outlook but its not working. (May be auto forwarding is disabled). I can forward mails manually. Is there anyway to get rid off this problem?

    Read the article

  • Lenovo T400S microphone mute button doesn't seem to be working in Windows 7 RTM

    - by spoon16
    The microphone mute button is not working on my T400s running Windows 7 RTM. The speaker mute button works (when I press it the light comes on and sounds goes off). When I click on the microphone button the light doesn't come on and the microphones don't mute. Is there a drive I am missing or something? I can't find a drive for the button on Lenovo site. Anyone out there have this button working?

    Read the article

  • Documenting Client Infrastructure

    - by Richard B
    Working on a new project, and need some documentation advice. I need to be able to document ~ 400 client sites to track assets, setup, hardware layout, network layout, etc. We want to have photos, maps, etc. wherever possible. We need this for a call center environment. Has anyone found any off the shelf software that performs this functionality, or are we on our own to develop the tools that we require?

    Read the article

  • How to disable ipv6 on MacOS and never see an address resolved to ipv6

    - by shabunc
    On MacOS (10.8.5 if that matters) I'm trying to disable off ipv6 via networksetup -setv6off Wi-Fi. Nevertheless, when I'm trying to wget a specific files URL resolves to ipv6 address and download fails. I just wonder what I am missing in order not to feel as stupid as I currently feel. ifconfig shows that some of interfaces have inet6 enabled, but I just don't know whether this is relevant at all. networksetup -listallnetworkservices does not show anything extraordinary I've forgot about.

    Read the article

  • AdvancedFirewall: Adding a Program to the Inbound Rules

    - by bvanderw
    I am writing an application that contains a web server running on port 50000. On Windows 7, short of turning the firewall off completely, I am having trouble configuring the firewall to allow other computers on the same private LAN to connect to the server. Simply adding the program to the allowed programs list doesn't seem to work. The network connection is set to be a "Home" network (but I am not using Home Networking). Can anyone suggest where I should be looking to troubleshoot this? Bruce

    Read the article

  • how to create a home server ?

    - by Eva
    i download appserv and install on my computer and set the default ip in my Default Gateway but when other people want to connect to my home server , they get the error of time out ! what am i going to do ? my server address : http://192.168.210.230/ and my firewall is now off ! also my antivirus pls help me . Thanks in advance

    Read the article

  • how to create a home server ?

    - by Eva
    i download appserv and install on my computer and set the default ip in my Default Gateway but when other people want to connect to my home server , they get the error of time out ! what am i going to do ? my server address : http://192.168.210.230/ and my firewall is now off ! also my antivirus pls help me . Thanks in advance

    Read the article

  • montoring service to detect when email is not received

    - by DGM
    I would like to monitor an email server - not whether the port is open and receiving, but rather that a "canary" message sent every so often actually arrives somewhere else. I have had a problem with a server getting firewalled off and no one noticing that cron jobs are not coming from the machine for a few weeks. Of course, the machine itself cannot send out a notification if it is having problems, so this requires an outside service. Any ideas?

    Read the article

  • Local IP address same as Google's external

    - by GRIGORE-TURBODISEL
    I'm exampling Google's IPs, but you get the idea. What happens if somebody configures a router's LAN address pool to range from 62.231.75.2 to 62.231.75.255, then his computer's IP address to 62.231.75.232 and someone else on the network tries to access Google? Or better off, is there any case in which someone in that network can, by merely attempting to access Google, accidentally bump into another computer on the network?

    Read the article

  • vista issue with shift key

    - by Mr New
    for some reason when i press the shift key on my laptop keyboard is mapped to 'ctrl+v' which does a paste. i thought it was the keyboard but then i replaced it with a wireless one,it still gives me the same issue. can someone help me. i cant just turn off the shift key all together because i do need it at times. model 8510w; vista operating system

    Read the article

  • WRTP54G Bypass Login Admin

    - by vonhogen
    I've been trying to log into my WRTP54G router, but I forgot the password. Is there any way to temporarily disable the login like for the wrt54g: http://www.velocityreviews.com/forums/t519535-help-my-linksys-wrt54g-router-was-broken-into-using-the-curl-command.html If anyone has this router, could they examine the page to turn off admin login, and see what I would need to send in a POST request?

    Read the article

  • Launch Chrome as application

    - by Chris
    Hi, I am writing a web app. I would like the users to be able to launch a Chromium browser (SRWare Iron) without an address bar or tabs.. just a frame.. Possible? How? Thanks UPDATE: Sry answered my own question. Pulled the --app="url" switch off a Gears icon that Remember The Milk made on my desktop. If I had only kept looking instead of posting :)

    Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >