Search Results

Search found 11395 results on 456 pages for 'intel integrated graphics'.

Page 171/456 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Ubuntu 13.10 installer making no changes to partition, even after complete

  - by dragonhart6505

  Trying to install Ubuntu 13.10 (x64 package) on a HP Probook 4430S from USB made with UnetBootin. Intel Celeron B810 Dual-core x64 1.6ghz 4gb Ram Intel Graphics HD 2000 320GB HDD - 3 partitions (1 with backup files - 40gb, 2 Win7 that were dual-boot but no longer boot after attempting to install - 55gb and 222gb) I am fine with losing the data on the 222gb partition, but when trying to install it only shows the 55gb and the 222gb, but the 222gb is not 222gb...its including the 40gb backup. Whatever, went through with the installation anyway. Files can be replaced (just backed-up games anyway.) Installation appears to run without a hitch on the now 222gb/262gb partition, formatted to ext4 with the installer itself. Asks to reboot to begin using. Upon rebooting, I get the GNU boot selection screen. Press Enter on "Ubuntu". Get a "Gave up booting from root..." or something error. Reboot and load "Try without installing" option from USB. Once booted, nothing has changed! All 3 partitions are still present, all files intact. But now I can't boot my Win7 55gb partition. EVERYTHING in the "Try..." loader works perfectly. Bluetooth, Wifi, Display adapter, SD Card reader, HDMI-Out, DVD drive, USB ports...even reads correct battery data. Help?

  Read the article

• Asus N46VZ prouduces more heat when on ubuntu compared to windows

  - by Blaze Tama

  First, i just used ubuntu as my main operating system, so please bear with me. My Asus N46VZ temps is pretty high when im on ubuntu (13.10). The temps are 60C even though i just open a browser. This does not happened on windows, where the temps is just around 50C. I did some research and some people said that the problem might be on my graphic card. I have an intel HD 4000 and GT 650m. So i tried to check my system settings and it said im using "Intel® Ivybridge Mobile". So, i tried to check the "additional drivers" tab on software & update settings but i found nothing there. The point is, i still dont know what make my laptop "overheating". The VGA part is just my guess (and is still dont understand what is the correlation between my VGA and the heat, and everything except the temp seems fine). Any help is appreciated. Thanks for your help :D

  Read the article

• Will BIOS boot mode Ubuntu install be able to boot when firmware "Fast Boot" is "Ultra Fast"?

  - by Pro Backup

  I have an AsRock mainboard with UEFI BIOS P1.50 02/14/2014. The firmware "Fast Boot" option is set to "Fast", Boot Option #1 is set to "AHCI P4: OCZ-VERT...": this is BIOS not UEFI boot. This boot disk has an MBR partitioning scheme (# parted -l | grep Partition\ Table:). Therefore Ubuntu 14.04 is installed in BIOS/CMS (Grub-PC) mode. The Ubuntu boot process ends in a text console (no GUI). There is no external graphics card in use. The stock Ubuntu kernel is replaced with Ubuntu supplied mainline 3.16.0-031600rc6-generic. dmesg outputs lines containing BIOS, like: SMBIOS 2.7 present Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored BIOS EDD facility v0.16 2004-Jun-25, 0 devices found The ASRock BIOS it selves display this help text for "Ultra Fast - Fast Boot": Ultra Fast mode is only supported by Windows 8 and the VBIOS must support UEFI GOP if you are using an external graphics card. Please notice that Ultra Fast mode will boot so fast that the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows. Assumptions: I suspect after changing UEFI setting "Fast Boot" to "Ultra Fast" that the machine will no longer boot into Ubuntu's console. I expect when first exchanging "Grub-pc" with "Grub-efi", that the machine will still be able to boot to a grub menu (thus allowing to change the "Fast Boot" setting back to "Fast" without clearing CMOS). Are these two "Fast Boot" assumptions correct, and/or, may I expect Ubuntu 14.04 running mainline kernel 3.16rc6 and Grub-efi to still boot to console after enabling UEFI Ultra Fast Boot?

  Read the article

• AMD FX CPU drivers/patch

  - by Mubeen Shahid

  I am using Ubuntu since 2009 on notebooks with Intel CPUs. However now, that I am using AMD's FX 6300, I am interested in knowing if there exists anything from Ubuntu (specifically any kernel enhancements/drivers/patches) for AMD's FX "family 15h" Piledrivers. Reason: I would like to have a kernel which uses the hardware to its full capacity, be able to use the latest instruction sets, for max. performance. I did some tests, started with compiling stable 3.9.7 on my 12.04 LTS box, and during compilation I choose processor vendor AMD (unchecked Intel/VIA/etc.), and when I started Ubuntu with this compiled kernel, in the section "System Settings - Additional Drivers" I found that, in addition to graphic card's drivers, there were AMD family 15h drivers also. However, I would prefer something in this regard tested/signed by Ubuntu developers. P.S: 1- the kernel that I have compiled has some issues with Nvidia graphics drivers, so I deleted kernel 3.9.7 and installed signed 3.8.xx from Ubuntu repositories. 2- incase if somebody is planning to advise me to install "AMD64", I am not talking about AMD64 (which is in fact for 64-bit platform).

  Read the article

• Multi-Resolution Mobile Development

  - by user2186302

  I'm about to start development on my first game for mobile phone (I already have a flash prototype completed so it's jsut a matter of "porting" it to mobile and fixing up the code) and plan on hopefully being able to get the game working on iphones and most android devices. I am using Haxe along with OpenFL and HaxeFlixel for development. My question is: What resolution should I design the game in initially and/or what is the best way to develop a game for multiple resolutions. I have found multiple different methods, the best, in my opinion, being strategy 3 on this page: http://wiki.starling-framework.org/manual/multi-resolution_development. However I have some questions about this. First, what would the best base resolution to use be, the guide suggests 240*320 which seems alright to me, although if I chose to use pixel graphics as I most probably will given I'm using HaxeFlixel, I'm not sure if they'll look too blocky on larger screens which I'm not even sure is a problem as it might still look alright. (Honestly, not sure about that and if anyone has any examples of games that use this method and look nice). Finally, please feel free to share whatever methods you use and think is best. For example, HaxeFlixel has a scaling feature that scales the game to fit the exact screen size, but I'm afraid that would lead to blurry and improperly scaled graphics since it would scale by non-integers. But, I'm not sure how noticeable a problem that may or may not be. Although from experience I'm pretty sure it won't look nice and currently I do not think I'm going to go for this option. So, I would really appreciate any help on this subject. Thank you in advance.

  Read the article

• Can I set my Optimus Nvidia card to run Unity3D with bumblebee?

  - by manuhalo

  I'd like to know whether I can run compiz on my Nvidia card to speed things up. It's a Dell XPS15 laptop but I'm mostly using it as a desktop, so battery life is not important. Apparently my Intel integrated card is able to run unity 3D, but my Nvidia GT 420M is not. Here's the output of unity_support_test, both with optirun and without it: manuhalo@Ubuntu-XPS-L501X:~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 420M/PCI/SSE2 OpenGL version string: 4.1.0 NVIDIA 280.13 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no manuhalo@Ubuntu-XPS-L501X:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes Any ideas of why this is happening? Thanks in advance to anyone able to shed some light on this. What I have tried: Installed the v290 drivers from the x-stable PPA. Tried forcing Unity-3D to work by telling Unity to ignore the unity-support-test results i.e. gksudo gedit /etc/environment add the following UNITY_FORCE_START=1 to the end of the file.

  Read the article

• how can I get 32-bit program to run on 64-bit Ubuntu?

  - by Carol

  Sorry to be asking this, but I have read quite a few posts and articles a lot of places wrt the issue I am having, to no avail. I am trying to get a Second Life Viewer (Firestorm) to run, and just keep getting the '64-bit error message' it throws. I have installed every 32-lib I can find, still doesn't work. I think I am surely missing some setting somewhere, or running Firestorm from the wrong place, or something, but I have no idea what. FWIW, Firestorm loads but doesn't behave right in the 32-bit version, either. I have actually tried several linux distros, 32 and 64-bit. Mint 32-bit runs it straight off, and Mint 64-bit throws the '64-bit error'. openSUSE, any version, won't run it at all. Oh, and all the other SL viewers I have tried behave the same way. I am beginning to wonder if my set-up just doesn't like linux. Here is my system info: CPU: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (2661 MHz) Memory: 4026 MB OS Version: Linux 3.2.0-29-generic-pae #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 i686 Graphics Card Vendor: ATI Technologies Inc. Graphics Card: ATI Radeon HD 5700 Series I appreciate any help anyone can give me! Thanks so much! Carol :)

  Read the article

• How to get my laptop to detect SD cards inserted into its built-in card reader?

  - by Candelight

  My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

  Read the article

• Radeon 9200 Driver?

  - by usuhh86

  I've been using Linux for a while, but haven't really done more than installed programs. I have Ubuntu 12.04 with an ATI Radeon 9200 graphics card. Ubuntu didn't recognize it during the install. All I want is a driver. Preferably the proprietary driver, but I'll settle for an open-source one if I need to. I went to the AMD support website, and whenever I click on the download link for "ATI Proprietary Linux x86 Display Driver 8.28.8" I get redirected to the main AMD website. I tried this on Firefox, Chrome, even booted up my netbook and tried it on IE9. Does anybody have a download link? And if not, a link to download an open-source alternative? Any help will be greatly appreciated. I'm pretty much still a newbie at this. OpenGL vendor string: Tungsten Graphics, Inc. OpenGL renderer string: Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2 OpenGL version string: 1.3 Mesa 8.0.2 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: no GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: no Unity 3D supported: no

  Read the article

• Problems with Ubuntu and AMD A10-4655M APU

  - by Robert Hanks

  I have a new HP Sleekbook 6z with AMD A10-4655M APU. I tried installing Ubuntu with wubi--the first attempt ended up with a 'AMD unsupported hardware' watermark that I wasn't able to remove (the appeared when I tried to update the drivers as Ubuntu suggested) On the second attempted install Ubuntu installed (I stayed away from the suggested drivers) but the performance was extremely poor----as in Windows Vista poor. I am not sure what the solution is--if I need to wait until there is a kernel update with Ubuntu or if there are other solutions--I realise this is a new APU for the market. I would love to have Ubuntu 12.04 up and running--Windows 7 does very well with this new processor so Ubuntu should, well, be lightening speed. The trial on the Sleekbook with Ubuntu 12.10 Alpha 2 release was a complete failure. I created a bootable USB. By using either the 'Try Ubuntu' or 'Install Ubuntu' options resulted in the usual purple Ubuntu splash screen, followed by nothing...as in a black screen without any hint of life. Interestingly one can hear the Ubuntu intro sound. In case you are wondering, this same USB was trialed subsequently on another computer with and Intel Atom Processor. Worked flawlessly. Lastly the second trial on the Sleekbook resulted in the same results as the first paragraph. Perhaps 12.10 Beta will overcome this issue, or the finalised 12.10 release in October. I don't have the expertise to know what the cause of the behaviour is-the issue could be something else entirely. Sadly, the Windows 7 performance is very good with this processor-very similar and in some instances better to the 2nd generation Intel i5 based computer I use at my workplace. Whatever the cause is for the performance with Ubuntu 12.04 or 12.10 Alpha 2, the situation doesn't bode well for Ubuntu. Ubuntu aside, the HP Sleekbook is a good performer for the price. I am certain once the Ubuntu issue is worked on and solutions arise, the Ubuntu performance will probably be better than ever.

  Read the article

• User Experience Monitoring with Enterprise Manager Cloud Control 12c and Real User Experience Insight 12R1 Demo Now Available!

  - by JuergenKress

  For access to the Oracle demo systems please visit OPN and talk to your partner expert We are pleased to announce the availability of the Oracle real user experience Insight demo that showcases some of the key capabilities of user experience monitoring. This demo specifically focuses on business reporting, integrated performance diagnostics, tracking of customer journey’s through RUEI’s userflow tracking capabilities and it’s key performance Iidicators tracking and configuration. Demo Highlights The demo showcases the following capabilities of real user experience Insight. Application-centric dashboard Integration with Oracle Enterprise Manager 12c – JVMD, ADP and BTM Session diagnostics and user session replay Monitoring through “Key Performance Indicators” (KPI) --- create alerts/incidents FUSION Application centric dashboards & integrated BI Demo Instructions Go to the DSS website for Oracle Partners. On the Standard Demo Launchpad page, click on the link “Real User Experience Insight 12c (Aug ‘12)” (tagged as “NEW”), under the “Applications Management” section. The demo launchpad page contains a link to a detailed demo script with instructions on how to show the demo. BPM 11.1.1.5 for Apps: BPM for EBS Demo available For access to the Oracle demo systems please visit OPN and talk to your Partner Expert SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: User Experience Monitoring,EM12c,Demo,dss SOA,IDM,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

  Read the article

• How to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  - by mehdi

  I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• browser without gpu support

  - by manuzhang

  Google has an Easter egg that draws 3D graph but when I tried it out on chrome it complained about no WebGL support. I've also tested it on Firefox whose WebGL support was enabled but ended up with the same problem. Thus, I suspect it's an issue of my GPU. Some googling led me to chrome://gpu and here's what I got Graphics Feature Status Canvas: Software only, hardware acceleration unavailable HTML Rendering: Software only, hardware acceleration unavailable 3D CSS: Unavailable. Hardware acceleration unavailable WebGL: Unavailable. Hardware acceleration unavailable WebGL multisampling: Unavailable. Hardware acceleration unavailable Problems Detected GPU process was unable to boot. Access to GPU disallowed. GL driver is software rendered. Accelerated compositing is disabled.: 59302 Mesa drivers in linux older than 7.11 are assumed to be buggy. Accelerated 2d canvas is unstable in Linux at the moment. Version Information Data exported Tue Apr 10 2012 18:35:57 GMT+0800 (CST) Chrome version 18.0.1025.151 (Official Build 130497) Operating system Linux 3.0.0-0300-generic Software rendering list version 1.27 ANGLE revision 988 2D graphics backend Skia I wonder what each of the problem implies and How I may properly deal with it? I'm using Ubuntu 11.04

  Read the article

• Unity3d web player fails to load textures

  - by José Franco

  I'm having a problem with Unity3d Web Player. I have developed a project and succesfully deployed it in a web app. It works with absolutely no problem on my PC. This app is to be installed on two identical machines. I have installed them in both and it only works properly in one. The issue I have is on a computer it fails to properly load the models and textures, so the game runs but instead of the models I can only see black rectangles on a blue background. It has the same problem with all browsers and I get no errors either by the player or by JavaScript. The only difference between these computers is that one that has the problem is running on Windows 8.1 and the other one on Windows 8 only. Could this be the cause of the issue? It works fine on my computer with Windows 8.1. However both of the other computers have specs that are significantly lower than mine. I have already searched everywhere and it seems that it has to do with the individual games, however I think it may have to do with the computer itself because it runs properly in the other two. The specs on the computes I'm installing the app on are as follows: Intel Celeron 1.40 GHz, 2GB RAM, Intel HD Graphics If anybody could point me in the right direction I would be very grateful I forgot to mention, I'm running Unity Web player 4.3.5 and the version on the other two computers is 4.5.0

  Read the article

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• Suggestions to start a cross-platform project

  - by Gabriele

  I have a big project in my head, it should be cross-platform (Win, Max and Linux), online (Client - Server) and with 3D graphics. I would like some suggestions to start with the right things. Currently I'm a PHP/MySQL coder, I used to code in C and Pascal on DOS ages (Borland Times ;)), my C knowlegde need a refresh but it's ok. I guess C++ it's the right language. What platform and what i should use to code? I can choose from all three platforms. My idea was to use Visual Studio 2010 C++, but i'm not sure if it support Native code. What kind of libraries should i use? I guessed OpenSSL for the login, OpenGL for graphics part. For the Audio or the GUI? Any other suggestions are well accepted. I know it's a "BIG DEAL" but I have no rush and it'll be a free-time project, only for my pleasure. Thank you in advance.

  Read the article

• Video lags/freezes in SMPlayer and VLC

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

  - by rahi

  I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

  Read the article

• Why does video playback lag/freeze when I go into full-screen mode?

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Can't run minecraft on ubuntu 12.04 lts [duplicate]

  - by user170011

  This question already has an answer here: How to correctly install and troubleshoot Minecraft (Client) 3 answers I was trying to run minecraft on my laptop with ubuntu 12.04 lts 64 bit. I have a lenovo ideapad p580 with 7.7 Gb and an Intel® Core™ i7-3520M CPU @ 2.90GHz × 4 processor. Under the graphics section of the system overview in ubuntu it says I have none installed. My computer comes with and nvidia geforce graphics card but it isnt recognized. When I start minecraft I get this crash report. ---- Minecraft Crash Report ---- // Shall we play a game? Time: 24/06/13 7:23 PM Description: Failed to start game org.lwjgl.LWJGLException: Could not init GLX at org.lwjgl.opengl.LinuxDisplayPeerInfo.initDefaultPeerInfo(Native Method) at org.lwjgl.opengl.LinuxDisplayPeerInfo.<init>(LinuxDisplayPeerInfo.java:52) at org.lwjgl.opengl.LinuxDisplay.createPeerInfo(LinuxDisplay.java:684) at org.lwjgl.opengl.Display.create(Display.java:854) at org.lwjgl.opengl.Display.create(Display.java:784) at org.lwjgl.opengl.Display.create(Display.java:765) at net.minecraft.client.Minecraft.a(SourceFile:235) at avv.a(SourceFile:56) at net.minecraft.client.Minecraft.run(SourceFile:507) at java.lang.Thread.run(Thread.java:679) A detailed walkthrough of the error, its code path and all known details is as follows: -- System Details -- Details: Minecraft Version: 1.5.2 Operating System: Linux (amd64) version 3.5.0-34-generic Java Version: 1.6.0_27, Sun Microsystems Inc. Java VM Version: OpenJDK 64-Bit Server VM (mixed mode), Sun Microsystems Inc. Memory: 406175448 bytes (387 MB) / 514523136 bytes (490 MB) up to 1908932608 bytes (1820 MB) JVM Flags: 2 total; -Xmx2048M -Xms512M AABB Pool Size: 0 (0 bytes; 0 MB) allocated, 0 (0 bytes; 0 MB) used Suspicious classes: No suspicious classes found. IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 LWJGL: 2.4.2 OpenGL: ~~ERROR~~ NullPointerException: null Is Modded: Probably not. Jar signature remains and client brand is untouched. Type: Client (map_client.txt) Texture Pack: Default Profiler Position: N/A (disabled) Vec3 Pool Size: ~~ERROR~~ NullPointerException: null I can run it on different versions of linux such as fedora.

  Read the article

• Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

  - by Iohannes

  After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• How do I separate codes with classes?

  - by Trycon

  I have this main class: package javagame; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.SlickException; import org.newdawn.slick.state.BasicGameState; import org.newdawn.slick.state.StateBasedGame; public class tests extends BasicGameState{ public boolean render=false; tests1 test = new tests1(); public tests(int test) { // TODO Auto-generated constructor stub } @Override public void init(GameContainer arg0, StateBasedGame arg1) throws SlickException { // TODO Auto-generated method stub } @Override public void render(GameContainer arg0, StateBasedGame arg1, Graphics g) throws SlickException { // TODO Auto-generated method stub if(render==true) { g.drawString("Hello",100,100); } } @Override public void update(GameContainer gc, StateBasedGame s, int delta) throws SlickException { // TODO Auto-generated method stub test.render=render; test.update(gc, s, delta); } @Override public int getID() { // TODO Auto-generated method stub return 1000; } } and its sub-class: package javagame; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Input; import org.newdawn.slick.state.StateBasedGame; public class tests1 { public boolean render; public void update(GameContainer gc, StateBasedGame s, int delta) { Input input = gc.getInput(); if(input.isKeyPressed(Input.KEY_X)) { render=true; } } } I was finding a way to prevent many codes in one class. I'm new to java. When I try running my game, then when I press X, it does not work. How am I suppose to fix that?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >