Search Results

Search found 11395 results on 456 pages for 'intel integrated graphics'.

Page 175/456 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Why does calling CreateDXGIFactory prevent my program from exiting?

  - by smoth190

  I'm using CreateDXGIFactory to get the graphics adapters and display modes. When I call it, it works fine and I get all the data. However, when I exit my program, the main Win32 thread exits, but something stays open because it keeps debugging. Does CreateDXGIFactory create an extra thread and I'm not closing it? I don't understand. The only thing I would suspect is that in the documentation it says it doesn't work if it's called from DllMain. It is in a DLL, but it's not called from DllMain. And it doesn't fail, either. I'm using DirectX 11. Here is the function that initializes DirectX. I haven't gotten past retrieving the refresh rate because of this problem. I commented everything out to pinpoint the problem. bool CGraphicsManager::InitDirectX(HWND hWnd, int width, int height) { HRESULT result; IDXGIFactory* factory; IDXGIOutput* output; IDXGIAdapter* adapter; DXGI_MODE_DESC* displayModes; DXGI_ADAPTER_DESC adapterDesc; unsigned int modeCount = 0; unsigned int refreshNum = 0; unsigned int refreshDen = 0; //First, we need to get the monitors refresh rater result = CreateDXGIFactory(__uuidof(IDXGIFactory), (void**)&factory); //if(FAILED(result)) //{ //MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to create DXGI factory\nError:\n%s"), DXGetErrorDescription(result)); //return false; //} /*//Create a graphics card adapter result = factory->EnumAdapters(0, &adapter); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get graphics adapters\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Get the output result = adapter->EnumOutputs(0, &output); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get adapter output\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Get the modes result = output->GetDisplayModeList(DXGI_FORMAT_R8G8B8A8_UNORM, DXGI_ENUM_MODES_INTERLACED, &modeCount, 0); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get mode count\nError:\n%s"), DXGetErrorDescription(result)); return false; } displayModes = new DXGI_MODE_DESC[modeCount]; result = output->GetDisplayModeList(DXGI_FORMAT_R8G8B8A8_UNORM, DXGI_ENUM_MODES_INTERLACED, &modeCount, displayModes); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get display modes\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Now we need to find one for our screen size for(unsigned int i = 0; i < modeCount; i++) { if(displayModes[i].Width == (unsigned int)width) { if(displayModes[i].Height == (unsigned int)height) { refreshNum = displayModes[i].RefreshRate.Numerator; refreshDen = displayModes[i].RefreshRate.Denominator; break; } } } //Store the video card data result = adapter->GetDesc(&adapterDesc); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get adapter description\nError:\n%s"), DXGetErrorDescription(result)); return false; } m_videoCard = new CVideoCard(); MemoryUtil::CreateGameObject(m_videoCard); m_videoCard->VideoCardMemory = (unsigned int)(adapterDesc.DedicatedVideoMemory); wcstombs_s(0, m_videoCard->VideoCardDescription, 128, adapterDesc.Description, 128);*/ //ReleaseCOM(output); //ReleaseCOM(adapter); ReleaseCOM(factory); //DeletePointerArray(displayModes); return true; } Also, I don't know if this means anything, but this is some of the output log when the function is commented out: //... 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msvcr100d.dll', Symbols loaded. 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\imm32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msctf.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\uxtheme.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Program Files (x86)\Common Files\microsoft shared\ink\tiptsf.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\ole32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleaut32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\clbcatq.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleacc.dll', Cannot find or open the PDB file The program '[6560] LostRock.exe: Native' has exited with code 0 (0x0). And when it isn't commented out... //... 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\cfgmgr32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\devobj.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\wintrust.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\crypt32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msasn1.dll', Cannot find or open the PDB file 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\setupapi.dll' 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\devobj.dll' 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\cfgmgr32.dll' 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\clbcatq.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleacc.dll', Cannot find or open the PDB file The thread 'Win32 Thread' (0xb94) has exited with code 0 (0x0). The program '[8096] LostRock.exe: Native' has exited with code 0 (0x0). //This is called when I click "Stop Debugging" P.S. I know it is CreateDXGIFactory because if I comment it out, the program exits correctly.

  Read the article

• Trying to detect collision between two polygons using Separating Axis Theorem

  - by Holly

  The only collision experience i've had was with simple rectangles, i wanted to find something that would allow me to define polygonal areas for collision and have been trying to make sense of SAT using these two links Though i'm a bit iffy with the math for the most part i feel like i understand the theory! Except my implementation somewhere down the line must be off as: (excuse the hideous font) As mentioned above i have defined a CollisionPolygon class where most of my theory is implemented and then have a helper class called Vect which was meant to be for Vectors but has also been used to contain a vertex given that both just have two float values. I've tried stepping through the function and inspecting the values to solve things but given so many axes and vectors and new math to work out as i go i'm struggling to find the erroneous calculation(s) and would really appreciate any help. Apologies if this is not suitable as a question! CollisionPolygon.java: package biz.hireholly.gameplay; import android.graphics.Canvas; import android.graphics.Color; import android.graphics.Paint; import biz.hireholly.gameplay.Types.Vect; public class CollisionPolygon { Paint paint; private Vect[] vertices; private Vect[] separationAxes; CollisionPolygon(Vect[] vertices){ this.vertices = vertices; //compute edges and separations axes separationAxes = new Vect[vertices.length]; for (int i = 0; i < vertices.length; i++) { // get the current vertex Vect p1 = vertices[i]; // get the next vertex Vect p2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; // subtract the two to get the edge vector Vect edge = p1.subtract(p2); // get either perpendicular vector Vect normal = edge.perp(); // the perp method is just (x, y) => (-y, x) or (y, -x) separationAxes[i] = normal; } paint = new Paint(); paint.setColor(Color.RED); } public void draw(Canvas c, int xPos, int yPos){ for (int i = 0; i < vertices.length; i++) { Vect v1 = vertices[i]; Vect v2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; c.drawLine( xPos + v1.x, yPos + v1.y, xPos + v2.x, yPos + v2.y, paint); } } /* consider changing to a static function */ public boolean intersects(CollisionPolygon p){ // loop over this polygons separation exes for (Vect axis : separationAxes) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // loop over the other polygons separation axes Vect[] sepAxesOther = p.getSeparationAxes(); for (Vect axis : sepAxesOther) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // if we get here then we know that every axis had overlap on it // so we can guarantee an intersection return true; } /* Note projections wont actually be acurate if the axes aren't normalised * but that's not necessary since we just need a boolean return from our * intersects not a Minimum Translation Vector. */ private Vect minMaxProjection(Vect axis) { float min = axis.dot(vertices[0]); float max = min; for (int i = 1; i < vertices.length; i++) { float p = axis.dot(vertices[i]); if (p < min) { min = p; } else if (p > max) { max = p; } } Vect minMaxProj = new Vect(min, max); return minMaxProj; } public Vect[] getSeparationAxes() { return separationAxes; } public Vect[] getVertices() { return vertices; } } Vect.java: package biz.hireholly.gameplay.Types; /* NOTE: Can also be used to hold vertices! Projections, coordinates ect */ public class Vect{ public float x; public float y; public Vect(float x, float y){ this.x = x; this.y = y; } public Vect perp() { return new Vect(-y, x); } public Vect subtract(Vect other) { return new Vect(x - other.x, y - other.y); } public boolean overlap(Vect other) { if( other.x <= y || other.y >= x){ return true; } return false; } /* used specifically for my SAT implementation which i'm figuring out as i go, * references for later.. * http://www.gamedev.net/page/resources/_/technical/game-programming/2d-rotated-rectangle-collision-r2604 * http://www.codezealot.org/archives/55 */ public float scalarDotProjection(Vect other) { //multiplier = dot product / length^2 float multiplier = dot(other) / (x*x + y*y); //to get the x/y of the projection vector multiply by x/y of axis float projX = multiplier * x; float projY = multiplier * y; //we want to return the dot product of the projection, it's meaningless but useful in our SAT case return dot(new Vect(projX,projY)); } public float dot(Vect other){ return (other.x*x + other.y*y); } }

  Read the article

• Error in my Separating Axis Theorem collision code

  - by Holly

  The only collision experience i've had was with simple rectangles, i wanted to find something that would allow me to define polygonal areas for collision and have been trying to make sense of SAT using these two links Though i'm a bit iffy with the math for the most part i feel like i understand the theory! Except my implementation somewhere down the line must be off as: (excuse the hideous font) As mentioned above i have defined a CollisionPolygon class where most of my theory is implemented and then have a helper class called Vect which was meant to be for Vectors but has also been used to contain a vertex given that both just have two float values. I've tried stepping through the function and inspecting the values to solve things but given so many axes and vectors and new math to work out as i go i'm struggling to find the erroneous calculation(s) and would really appreciate any help. Apologies if this is not suitable as a question! CollisionPolygon.java: package biz.hireholly.gameplay; import android.graphics.Canvas; import android.graphics.Color; import android.graphics.Paint; import biz.hireholly.gameplay.Types.Vect; public class CollisionPolygon { Paint paint; private Vect[] vertices; private Vect[] separationAxes; int x; int y; CollisionPolygon(Vect[] vertices){ this.vertices = vertices; //compute edges and separations axes separationAxes = new Vect[vertices.length]; for (int i = 0; i < vertices.length; i++) { // get the current vertex Vect p1 = vertices[i]; // get the next vertex Vect p2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; // subtract the two to get the edge vector Vect edge = p1.subtract(p2); // get either perpendicular vector Vect normal = edge.perp(); // the perp method is just (x, y) => (-y, x) or (y, -x) separationAxes[i] = normal; } paint = new Paint(); paint.setColor(Color.RED); } public void draw(Canvas c, int xPos, int yPos){ for (int i = 0; i < vertices.length; i++) { Vect v1 = vertices[i]; Vect v2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; c.drawLine( xPos + v1.x, yPos + v1.y, xPos + v2.x, yPos + v2.y, paint); } } public void update(int xPos, int yPos){ x = xPos; y = yPos; } /* consider changing to a static function */ public boolean intersects(CollisionPolygon p){ // loop over this polygons separation exes for (Vect axis : separationAxes) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // loop over the other polygons separation axes Vect[] sepAxesOther = p.getSeparationAxes(); for (Vect axis : sepAxesOther) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // if we get here then we know that every axis had overlap on it // so we can guarantee an intersection return true; } /* Note projections wont actually be acurate if the axes aren't normalised * but that's not necessary since we just need a boolean return from our * intersects not a Minimum Translation Vector. */ private Vect minMaxProjection(Vect axis) { float min = axis.dot(new Vect(vertices[0].x+x, vertices[0].y+y)); float max = min; for (int i = 1; i < vertices.length; i++) { float p = axis.dot(new Vect(vertices[i].x+x, vertices[i].y+y)); if (p < min) { min = p; } else if (p > max) { max = p; } } Vect minMaxProj = new Vect(min, max); return minMaxProj; } public Vect[] getSeparationAxes() { return separationAxes; } public Vect[] getVertices() { return vertices; } } Vect.java: package biz.hireholly.gameplay.Types; /* NOTE: Can also be used to hold vertices! Projections, coordinates ect */ public class Vect{ public float x; public float y; public Vect(float x, float y){ this.x = x; this.y = y; } public Vect perp() { return new Vect(-y, x); } public Vect subtract(Vect other) { return new Vect(x - other.x, y - other.y); } public boolean overlap(Vect other) { if(y > other.x && other.y > x){ return true; } return false; } /* used specifically for my SAT implementation which i'm figuring out as i go, * references for later.. * http://www.gamedev.net/page/resources/_/technical/game-programming/2d-rotated-rectangle-collision-r2604 * http://www.codezealot.org/archives/55 */ public float scalarDotProjection(Vect other) { //multiplier = dot product / length^2 float multiplier = dot(other) / (x*x + y*y); //to get the x/y of the projection vector multiply by x/y of axis float projX = multiplier * x; float projY = multiplier * y; //we want to return the dot product of the projection, it's meaningless but useful in our SAT case return dot(new Vect(projX,projY)); } public float dot(Vect other){ return (other.x*x + other.y*y); } }

  Read the article

• How do I cleanly design a central render/animation loop?

  - by mtoast

  I'm learning some graphics programming, and am in the midst of my first such project of any substance. But, I am really struggling at the moment with how to architect it cleanly. Let me explain. To display complicated graphics in my current language of choice (JavaScript -- have you heard of it?), you have to draw graphical content onto a <canvas> element. And to do animation, you must clear the <canvas> after every frame (unless you want previous graphics to remain). Thus, most canvas-related JavaScript demos I've seen have a function like this: function render() { clearCanvas(); // draw stuff here requestAnimationFrame(render); } render, as you may surmise, encapsulates the drawing of a single frame. What a single frame contains at a specific point in time, well... that is determined by the program state. So, in order for my program to do its thing, I just need to look at the state, and decide what to render. Right? Right. But that is more complicated than it seems. My program is called "Critter Clicker". In my program, you see several cute critters bouncing around the screen. Clicking on one of them agitates it, making it bounce around even more. There is also a start screen, which says "Click to start!" prior to the critters being displayed. Here are a few of the objects I'm working with in my program: StartScreenView // represents the start screen CritterTubView // represents the area in which the critters live CritterList // a collection of all the critters Critter // a single critter model CritterView // view of a single critter Nothing too egregious with this, I think. Yet, when I set out to flesh out my render function, I get stuck, because everything I write seems utterly ugly and reminiscent of a certain popular Italian dish. Here are a couple of approaches I've attempted, with my internal thought process included, and unrelated bits excluded for clarity. Approach 1: "It's conditions all the way down" // "I'll just write the program as I think it, one frame at a time." if (assetsLoaded) { if (userClickedToStart) { if (critterTubDisplayed) { if (crittersDisplayed) { forEach(crittersList, function(c) { if (c.wasClickedRecently) { c.getAgitated(); } }); } else { displayCritters(); } } else { displayCritterTub(); } } else { displayStartScreen(); } } That's a very much simplified example. Yet even with only a fraction of all the rendering conditions visible, render is already starting to get out of hand. So, I dispense with that and try another idea: Approach 2: Under the Rug // "Each view object shall be responsible for its own rendering. // "I'll pass each object the program state, and each can render itself." startScreen.render(state); critterTub.render(state); critterList.render(state); In this setup, I've essentially just pushed those crazy nested conditions to a deeper level in the code, hiding them from view. In other words, startScreen.render would check state to see if it needed actually to be drawn or not, and take the correct action. But this seems more like it only solves a code-aesthetic problem. The third and final approach I'm considering that I'll share is the idea that I could invent my own "wheel" to take care of this. I'm envisioning a function that takes a data structure that defines what should happen at any given point in the render call -- revealing the conditions and dependencies as a kind of tree. Approach 3: Mad Scientist renderTree({ phases: ['startScreen', 'critterTub', 'endCredits'], dependencies: { startScreen: ['assetsLoaded'], critterTub: ['startScreenClicked'], critterList ['critterTubDisplayed'] // etc. }, exclusions: { startScreen: ['startScreenClicked'], // etc. } }); That seems kind of cool. I'm not exactly sure how it would actually work, but I can see it being a rather nifty way to express things, especially if I flex some of JavaScript's events. In any case, I'm a little bit stumped because I don't see an obvious way to do this. If you couldn't tell, I'm coming to this from the web development world, and finding that doing animation is a bit more exotic than arranging an MVC application for handling simple requests - responses. What is the clean, established solution to this common-I-would-think problem?

  Read the article

• UK OUG Conference Highlights and Insights

  - by Richard Bingham

  As per my preemptive post, this was the first time the annual conference organized by the UK Oracle User Group (UKOUG) was split into two events, one for Oracle Applications and another in December for Oracle Technology. Apps13, as it was branded, was hailed as a success, with over 1000 registered attendees and three days of sessions, exhibition, round-tables and many other types of content. As this poster on their stand illustrates, the UKOUG is a strong community with popular participants from both big and small Oracle partners and customers. The venue was a more intimate setting than previous years also, allowing everyone to casually bump into those they hoped to. It gave a real feeling of an Apps Community. The main themes over the days where CRM and Customer Experience, HCM, and FIN/SCM. This allowed people to attend just one focused day if they wanted. In addition the Apps Transformation stream ran across all three days, offering insights, advice, and details on the newer product solutions like Fusion Applications.  Here are some of the key take-aways I got from the conference, specific to my role in Fusion Applications Developer Relations: User Experience continues to be a significant reason for adopting some of the newer application products available, with immediately obvious gains in user productivity and satisfaction reported by customers. Also this doesn't stop with the baked-in UX either, with their Design Patterns proving popular and indeed currently being extended to including things like extending on ADF mobile and customizing the Simplified UI. More on this to come from us soon. The executive sessions emphasized the "it's a journey" phrase, illustrating that modern business applications are powered by technologies such as Cloud, Mobile, Social and Big Data and these can be harnessed to help propel your organization forward. Indeed the emphasis is away from the traditional vendor prescribed linear applications road map, and towards plotting a course based on business priorities supported by a broad range of integrated solutions. To help with this several conference sessions demoed the new "Applications Navigator" tool, developed in partnership with OUG members, which offers a visual framework to help organizations plan their Oracle Applications investments around business and technology imperatives. Initial reaction was positive, especially as customers do not need to decipher Oracle's huge product catalog and embeds the best blend of proven and integrated applications solutions. We'll share more on this when it is generally available. Several sessions focused around explanations and interpretation of Oracle OpenWorld 2013, helping highlight the key Oracle Applications messages and directions. With a relative small percentage of conference attendees also at OpenWorld (from a show of hands) this was a popular way to distill the information available down into specific items of interest for the community. Please note the original OpenWorld 2013 content is still available for download but will not remain available forever (via the Oracle website OpenWorld Content Catalog > pick a session > see the PDF download). With the release of E-Business Suite 12.2 the move to develop and deploy on the Fusion Middleware stack becomes a reality for many Oracle Applications customers. This coupled with recent E-Business Suite features such as the Integrated SOA Gateway and the E-Business Suite SDK for Java, illustrates how the gap between the technologies and techniques involved in extending E-Business Suite and Fusion Applications is quickly narrowing. We'll see this merging continue to evolve going forwards. Getting started with Oracle Cloud Applications is actually easier than many customers expected, with a broad selection of both large and medium sized organizations explaining how they added new features to their existing Oracle Applications portfolios. New functionality available from Fusion HCM and CX are popular extensions that do not have to disrupt those core business services. Coexistence is the buzzword here, and the available integration is also simpler than many expected, commonly involving an initial setup data load, then regularly incremental synchronizations, often without a need for real-time constant communication between systems. With much of this pre-built already the implementation process is also quite rapid. With most people dressed in suits, we wanted to get the conversations going without the traditional english reserve, so we decided to make ourselves a bit more obvious, as the photo below shows. This seemed to be quite successful and helped those interested identify and approach us. Keep a look out for similar again. In fact if you're in the UK there is an "Apps Transformation Day" planned by the UKOUG for the 19th March 2014, with more details to follow. Again something we'll be sure to participate in. I am hoping to attend the next half of the UKOUG annual conference, Tech13, that focuses more on Oracle technology and where there is more likely to be larger attendance of those interested in the lower-level aspects of applications customization and development. If you're going, let me know and maybe we can meet up.

  Read the article

• Wireless Connected But No Internet Connection (Ubuntu 12.04)

  - by Zxy

  I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

  Read the article

• CodePlex Daily Summary for Tuesday, November 27, 2012

  CodePlex Daily Summary for Tuesday, November 27, 2012Popular ReleasesCodeGen Code Generator: CodeGen 4.2.6: IMPORTANT: If you are using CodeGen in conjunction with Symphony Framework then it is important that you do not upgrade to this version of CodeGen until you also upgrade to Symphony Framework V2.1.0.0. Changes in this release include: The CodeGen installation on Windows now supports upgrading from a previously installed version. We use Windows Installers "major upgrade" mechanism, which essentially performs an automatic uninstall of a previous version before installing the new version. The ea...SimpleRest Integrated Pipeline: Beta: Beta version of the integrated REST pipeline.Kooboo CMS: Kooboo CMS 3.3.0: New features: Dropdown/Radio/Checkbox Lists no longer references the userkey. Instead they refer to the UUID field for input value. You can now delete, export, import content from database in the site settings. Labels can now be imported and exported. You can now set the required password strength and maximum number of incorrect login attempts. Child sites can inherit plugins from its parent sites. The view parameter can be changed through the page_context.current value. Addition of c...Facebook Windows 8 Sample: Facebook Windows 8 Sample: The current drop holds two versions of the sample: A basic version that uses a Facebook application to list the content of facebook page. A full version including the use of Bing Maps sdk for positioning the restaurant in a map, and showing how to get there. See Developing a Windows Store App to learn how to use the Bing Maps AJAX Control to add Bing Maps to your Windows Store app.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.75: Fix over-aggressive removal of local-variable assignments in return statements. Can't remove them if there are any inner-scope references. add settings properties/switches for V3 source map source root value, and a flag to indicate whether to add an XSSI-busting header to the map file.Distributed Publish/Subscribe (Pub/Sub) Event System: Distributed Pub Sub Event System Version 3.0: Important Wsp 3.0 is NOT backward compatible with Wsp 2.1. Prerequisites You need to install the Microsoft Visual C++ 2010 Redistributable Package. You can find it at: x64 http://www.microsoft.com/download/en/details.aspx?id=14632x86 http://www.microsoft.com/download/en/details.aspx?id=5555 Wsp now uses Rx (Reactive Extensions) and .Net 4.0 3.0 Enhancements I changed the topology from a hierarchy to peer-to-peer groups. This should provide much greater scalability and more fault-resi...sb0t v.5: sb0t 500 alpha 5: Keep those bug reports coming. :)Redmine Reports: Redmine Reports V 1.0.7: added new sample report added new DateRange feature for report generation (see issue Tracker ID 15372) updated to latest MySql (6.6.4.0)datajs - JavaScript Library for data-centric web applications: datajs version 1.1.0: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes...Team Foundation Server Administration Tool: 2.2: TFS Administration Tool 2.2 supports the Team Foundation Server 2012 Object Model. Visual Studio 2012 or Team Explorer 2012 must be installed before you can install this tool. You can download and install Team Explorer 2012 from http://aka.ms/TeamExplorer2012. There are no functional changes between the previous release (2.1) and this release.Coding Guidelines for C# 3.0, C# 4.0 and C# 5.0: Coding Guidelines for CSharp 3.0, 4.0 and 5.0: See Change History for a detailed list of modifications.Math.NET Numerics: Math.NET Numerics v2.3.0: Portable Library Build: Adds support for WP8 (.Net 4.0 and higher, SL5, WP8 and .NET for Windows Store apps) New: portable build also for F# extensions (.Net 4.5, SL5 and .NET for Windows Store apps) NuGet: portable builds are now included in the main packages, no more need for special portable packages Linear Algebra: Continued major storage rework, in this release focusing on vectors (previous release was on matrices) Thin QR decomposition (in addition to existing full QR) Static Cr...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.1: +2012-11-25 v3.2.1 +????????。 -MenuCheckBox?CheckedChanged??????，??????????。 -???????window.IDS??????????????。 -?????（??TabCollection，ControlBaseCollection）???，????????????????。 +Grid??。 -??SelectAllRows??。 -??PageItems??，?????????????，?????、??、?????。 -????grid/gridpageitems.aspx、grid/gridpageitemsrowexpander.aspx、grid/gridpageitems_pagesize.aspx。 -???????????????????。 -??ExpandAllRowExpanders??，?????????????????（grid/gridrowexpanderexpandall2.aspx）。 -??????ExpandRowExpande...VidCoder: 1.4.9 Beta: Updated HandBrake core to SVN 5079. Fixed crashes when encoding DVDs with title gaps.ZXing.Net: ZXing.Net 0.10.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2521 of the java version windows phone 8 assemblies improvements and fixesBlackJumboDog: Ver5.7.3: 2012.11.24 Ver5.7.3 (1)SMTP???????、?????????、??????????????????????? (2)?????????、?????????????????????????? (3)DNS???????CNAME????CNAME????????????????? (4)DNS????????????TTL???????? (5)???????????????????????、?????????????????? (6)???????????????????????????????Liberty: v3.4.3.0 Release 23rd November 2012: Change Log -Added -H4 A dialog which gives further instructions when attempting to open a "Halo 4 Data" file -H4 Added a short note to the weapon editor stating that dropping your weapons will cap their ammo -Reach Edit the world's gravity -Reach Fine invincibility controls in the object editor -Reach Edit object velocity -Reach Change the teams of AI bipeds and vehicles -Reach Enable/disable fall damage on the biped editor screen -Reach Make AIs deaf and/or blind in the objec...Umbraco CMS: Umbraco 4.11.0: NugetNuGet BlogRead the release blog post for 4.11.0. Whats new50 bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesGetPropertyValue now returns an object, not a string (only affects upgrades from 4.10.x to 4.11.0) NoteIf you need Courier use the release candidate (as of build 26). The code editor has been greatly improved, but is sometimes problematic in Internet Explorer 9 and lower. Previously it was just disabled for IE and...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.3: Fixed supported files list on open dialog (added .pls and .m3u) Impulse Media Player splash message (can be disabled anyway)WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availableNew Projects20121126: ??????SVN????。AHMobe: Testing deployments to AppHarborArborium: A versatile, tree-based data structure to store or exchange data and metadata efficiently (in binary format). Written in pure C#.Ballenato: Mobile app salidas.Blend Assets Manager (Blasm): Blend Assets Manager (Blasm) is a simple application to allow users of Expression Blend adding custom and third-party controls to Blend Assets tab.Cornell Class Explorer: Cornell University Courses of Study Windows 8 AppCustom Cursor for Metro APP XAML Based: It's a porting program from Nielsen for win 8 Metro Style app XAML based. original: http://www.sharpgis.net/post/2011/05/09/Custom-Cursors-in-Silverlight.aspxDataAnalyzer: Application for analyzing protocols and other binary dataDebugWriterTextBox: This is modified TextBox which can catch up Debug.Write() and display log. Also it can write log data to file - all you need is to set up file name!Dewin: Solution th? nghi?m cho chuong trình Dewin, dùng d? th?c hi?n co b?n v? hu?ng d?i tu?ngEducação no Trânsito: Sistema para Educação para o Trânsito – Um Ambiente para o Aprendizado tem como principal função gerir conteúdos de educação no trânsitoEjemplos alabra: Ejemplos para el blog http://www.alejandrolabra.comEnterprise MVC Music Store: The Enterprise Music Store takes the MvcMusicStore sample from ASP.Net and adds Dependency Injection, Unit Tests and a more maintainable architecture. ERC - Easy Redirect Converter: Tool to convert websites using .htaccess to maintain redirects on sites that do not support it. Great for moving from Apache to IIS Facebook Windows 8 Sample: This sample shows a way to work with Facebook APIs by using the Open Graph API in a Windows Store App. Gruyas: Plataforma educativa online Os like.G's Syndication Pocket: G's Syndication Pocket is simple RSS Aggregate application. This is suitable for .NET Compact Framework. I checked it on Sharp's W-ZERO3.HTML to OpenXML (PHP Script): H2OXML : HTML to OpenXML Converter is a simple PHP script which take HTML code and transform it into OpenXML Code. (for Docx) Indexr: Indexr is an open source project, where I am trying to share how to build a web application with Strong Architecture, Manageable, High Performance, EffectivelyjQuery Expandable Menu for SharePoint 2010: Packaged as a site collection feature, this component transforms the SharePoint 2010 standard navigation menu into an expandable-collapsible menu, using jQuery.K-Vizinhos: K-VizinhosLa Ranisima: La Ranisima is an open source "Space Invaders" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.lambdaCommandBuilderData: ???????????????????，????????????，???????。 ??????test??，?????????。LeyRay: Quick view and merge Doc and Pdf filesMessegeBox RightToLeft Lib: This is really simple lib project for use RTL in MessegeBox class. This just for short code and default option for RTL.MineFlagger: MineFlagger is a mine clearing game modeled after Microsoft’s Minesweeper. In addition to standard play, MineFlagger incorporates an AI for fun and training.MineSweeperChallenge: C# programming exercise. Simulates a given number of minesweeper games using a given ISweeper implementation (or use the step by step mode to study how the ISweeper implementations work). Create your own implementation and see how it compares to other implementations.MVVM Light Plus: Multiplatform MVVM Framework.Nethouse MVP: Nethouse MVP is a framework incorporating MVP base presenters, views and interfaces. Neznayka: Static Ruleset for VS2010 Database Edition. Noctl Library: Noctl is a C# library which contains tools to improve production time. It supports .net 4.5, Windows Phone 8 and Windows Store applications.Oridea.Data.Fetching: Oridea.Data.Fetching is a class library that consists of a few wrappers over the LINQ's IQueryable interface narrowing its scope to fetching, ordering, and paging operations. It is designed for use in the implementations of the Repository pattern.p301: Old project.PluggEd: To be continuedProject13241127: papaProject13271127: papareading control for windows phone: reading control for windows phoneRSUtility: RS Utility is a C# application that interacts with a SQL Server Reporting Services (SSRS) web service to manage items on a report server.sadd.practical.approach: SADD workshop is a project testorage to demonstrate practical approach of sadd while Lessons Learned site was developing. ?????? ???? ?????????? ??????????? ??? ?? ???????? ?????????? SADD ??? ???????? ????? "????????? ??????", ??????????? ????????? ??????????????? ?????? ?????.SimpleRest Integrated Pipeline: Simple light weight integrated extensible REST pipeline that developers can use to very quickly and reliably create REST services. Influenced by WebApi 0..6.0.0Substitute - Variable Substitution Utility for Config Management: Variable Substitution Utility for Configuration Management (FinalBuilder etc)Synq Placement Management Console: A client-service system for dynamic application deployment which integrates directly into active directory. This is the management console.Task Manager Student Project: Task manager or tmanager is a student ASP.NET MVC 4.0 project for Software Engineering classes. It is a web site, where you can planning your tasks.Tempus Fugate: YAFA for tracking music ratings and statistics. End state of these tools, utilities, plug-ins, and services will be to allow merging of statistic data between the various services and repositories in which users store their musical preferences. Examples of musical preferences include rating information and play history. Examples of services include last.fm, Facebook, iLike, Windows Media Player, and iTunes. tysyjsj: afaprojectWASM: Simple ASP.MVC windows azure storage manager with SQL Azure query window.Weather Slice: Use the German weather sevice Wetter.com for a weather forecast gadget Wettervorhersage von Wetter.comwwtfly: 111YBOT_Field_Control_2013: YBOT 2013 Field Control Software. Used to control the Youth BOT game field. Score the games and track field actions. The field currently uses 1-wire.??_iwtfly: ??_iwtfly

  Read the article

• iPhone - How do you make a resizable rectangle for cropping images?

  - by 0SX

  Hi everyone, I'm having a trouble making a re-sizable rectangle for cropping my images. I'm trying to achieve something like this picture: http://img192.imageshack.us/img192/8930/customcropbox.jpg Well, the only problem is I have no clue where to actually start. I need some advice to how I can achieve this effect of cropping. What documentation should I read up on? Core Graphics or Quartz 2d? Both? I've been coding for the iPhone since it's release date but I've never actually used core graphics and etc. Any help or advice would be much appreciated. I'll throw my code up here as I progress to show how it's done when I achieve it. :-) Also, this rectangular box is moveable across the screen in a UIImageView which just makes it more interesting. Thanks for the help and I look forward to achieving this goal.

  Read the article

• How to export pdf page as a image using pdfsharp .net library ?

  - by vi.su.

  How to export a pdf page as an image using pdfsharp .net library, for pixel level manipulation ? for example, something like, System.Drawing.BitMap.GetPixel() I am trying to find out empty area (all white, or of any colour) inside a pdf document, to write some graphics / image. 09, June 2010: I have tried this, but it is not working. why the following code is not working as expected ? Bitmap.GetPixel always returns 0. // // PdfSharp.Pdf.PdfDocument // PdfSharp.Pdf.PdfPage // PdfSharp.Drawing.XGraphics // System.Drawing.Bitmap // string srcPDF = @"C:\hcr\test\tmp\file1.pdf"; PdfDocument pdfd = PdfReader.Open(srcPDF); XGraphics xgfx = XGraphics.FromPdfPage(pdfd.Pages[0]); Bitmap b = new Bitmap((int) pdfp.Width.Point, (int) pdfp.Height.Point, xgfx.Graphics); int rgb = b.GetPixel(0, 0).ToArgb();

  Read the article

• Android Packaging Problem: resources.ap_ does not exist

  - by Galip

  I am trying to fix a problem in Eclipse for like 3 hours and I haven't made any progress. Tomorrow is the customer coming to look at my app, and I have no time left. This is really frustrating! This morning when I was coding and I wanted to run my app on my device Eclipse crashed all of a sudden. 'aapt.exe has stopped working' After this Eclipse wasn't starting anymore. It froze at the splash image. I looked on the internet and tried different solutions like going back to Java SE 6 update 20, changing .ini file etc. in the end reinstalling Eclipse did the job. Shortly after that the 'aapt.exe has stopped working' returned. I found a solution by changing my projects target. 1.5, 1.6, 2.2 doesn't matter, as long as it's different than the one before. Now I get the Error generating final archive: java.io.FileNotFoundException: C:\xxx\bin\resources.ap_ does not exist error. I tried clean but that doesn't work. Deleting and automatically regenarting R.java also didn't work. I ran the same code in Netbeans with the Android plugin and there it gives me the 'aapt.exe has stopped working' again :( Please guys, how can I fix this? Edit: I think I may have found the reason. These are the error lines in the console: org.xmlpull.v1.XmlPullParserException: Binary XML file line #3: <bitmap> requires a valid src attribute at android.graphics.drawable.BitmapDrawable.inflate(BitmapDrawable.java:341) at android.graphics.drawable.Drawable.createFromXmlInner(Drawable.java:779) at android.graphics.drawable.Drawable.createFromXml(Drawable.java:720) at com.android.layoutlib.bridge.ResourceHelper.getDrawable(ResourceHelper.java:150) at com.android.layoutlib.bridge.BridgeTypedArray.getDrawable(BridgeTypedArray.java:668) at android.view.View.<init>(View.java:1846) at android.view.View.<init>(View.java:1795) at android.view.ViewGroup.<init>(ViewGroup.java:282) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407) at org.eclipse.equinox.launcher.Main.main(Main.java:1383) [2011-01-17 16:37:20 - gegevens.xml] Unable to resolve drawable "com.android.layoutlib.utils.ResourceValue@267e33de" in attribute "background" The file it's talking about is 'bg.png'. It's a small png file which I repeat in a .xml file. <?xml version="1.0" encoding="utf-8"?> <bitmap xmlns:android="http://schemas.android.com/apk/res/android" android:src="@drawable/bg" android:tileMode="repeat" /> This file has worked from the first time without any problems. I deleted it from the drawable folder, waited for an error message, and then added it back. The red x next to the foldername got away, but still nothing different...

  Read the article

• How do I install an ASP.Net MVC application on IIS 7 using Wix?

  - by Simon Steele

  For IIS6 I can use the IIS helpers in Wix to install a web application like this: <iis:WebAppPool Id="AP_MyApp" Name="My Application Pool" Identity="networkService" /> <iis:WebApplication Id="WA_MyApp" Name="MyApp" WebAppPool="AP_MyApp"> <iis:WebApplicationExtension CheckPath="no" Executable="[NETFRAMEWORK20INSTALLROOTDIR]aspnet_isapi.dll" Verbs="GET,HEAD,POST"/> </iis:WebApplication> Unfortunately, this doesn't work for IIS7. We don't want to use the aspnet_isapi.dll mechanism, and instead want the integrated pipeline to handle the request routing. The app pool created by this script is in Classic mode not Integrated mode so none of the handlers get run correctly. How can I correctly install an MVC app on IIS 7?

  Read the article

• The underlying provider failed on Open

  - by senzacionale

  I was using .mdf for connect to DB and entityClient. Now i want to change connection string that trehe will be no .mdf Is this conectionstring correct <connectionStrings> <!--<add name="conString" connectionString="metadata=res://*/conString.csdl|res://*/conString.ssdl|res://*/conString.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=.\SQL2008;AttachDbFilename=|DataDirectory|\NData.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" />--> <add name="conString" connectionString="metadata=res://*/conString.csdl|res://*/conString.ssdl|res://*/conString.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=.\SQL2008;Initial Catalog=NData;Integrated Security=True;Connect Timeout=30;User Instance=True;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" /> becouse i always get error !The underlying provider failed on Open!

  Read the article

• Can we move shape (Diamond) in C#

  - by Ani

  I want to move a Diamond Shape in the form(for example 2 pixels every 200ms) horizantally. I used the following code in From_Paint Event. private void Form1_Paint(object sender, PaintEventArgs e) { Graphics g = e.Graphics; Point p1 = new Point(5,0); Point p2 = new Point(10, 5); Point p3 = new Point(5, 10); Point p4 = new Point(0, 5); Point[] ps = { p1, p2, p3, p4, p1 }; g.DrawLines(Pens.Black, ps);} I know how to move a picturebox but how to do with shape. Thanks, Ani

  Read the article

• Hosted Mac OS X/iPhone development

  - by dwj

  I want to try my hand at developing for the iPhone but I don't have an Intel-based Mac available to me; likewise, my budget doesn't include provisions for getting one anytime soon. I've tried messing around with winchain and that hasn't gone too well. I'm not interested in jail-breaking my phone and installing other tools for developing. I've read posts on using older macs with the development tool-kit but haven't tried it yet. In the end I just want to know I can compile without doing a ton of extra work or finding work-arounds. I don't mind only having access to a CLI compiler. Does anyone know of a hosting service that provides a shell access account on Intel-based Mac OS X machines?

  Read the article

• How to use Win32 SetCursor() with WPF resource and HwndHost

  - by Hank

  We have an HwndHost UIElement in our WPF application which is used to display Direct3d graphics, and the only way I have found to set a cursor for the HwndHost UIElment is to call the Win32 API SetCursor(). All of our cursors are resources in managed assemblies, and I would prefer to not change that, but I have not been able to find a way to load one of these cursors via any Win32 APIs like LoadImage(). Does anybody know how to get a handle(hCursor) to a cursor which is a resource in a managed assembly? Or, is there another way to set a cursor on an HwndHost displaying Direct3D graphics?

  Read the article

• Updating multiple Sprites - AS3 performance best practices

  - by dani

  Within the container "BubbleContainer" I have multiple "Bubble sprites". Each bubble's graphics object (a circle) is updated on a timer event. Let's say I have 50 Bubble sprites and each circle's radius should be updated with a mathematical formula. How do I organize this logic? How do I update all Bubble sprites within the BubbleContainer? (should I call a bubble.update() function or make a temporary reference to the graphics object?) Where do I put the Math logic? (as static functions?)

  Read the article

• Cannot use standard android color attribute in custom color selector

  - by Manish Gupta

  So, android defines the following in themes.xml: <style name="Theme"> ... <item name="colorPressedHighlight">@color/legacy_pressed_highlight</item> </style> and: <style name="Theme.Holo"> ... <item name="colorPressedHighlight">@color/holo_blue_light</item> </style> I want to use this colorPressedHighlight as the background color for my custom Button when it is pressed. So I defined the following in res/color/app_button_background.xml: <?xml version="1.0" encoding="utf-8"?> <selector xmlns:android="http://schemas.android.com/apk/res/android" > <item android:state_pressed="true" android:drawable="?android:colorPressedHighlight"/> <item android:drawable="@android:color/transparent" /> </selector> Finally, I define my custom ImageButton style: <style name="App_ImageButtonStyle" parent="@android:style/Widget.ImageButton"> <item name="android:gravity">center</item> <item name="android:background">@color/app_button_background</item> </style> I crash on app launch with the following call stack: 06-27 20:24:41.954: E/AndroidRuntime(532): Caused by: org.xmlpull.v1.XmlPullParserException: Binary XML file line #6: <item> tag requires a 'drawable' attribute or child tag defining a drawable 06-27 20:24:41.954: E/AndroidRuntime(532): at android.graphics.drawable.StateListDrawable.inflate(StateListDrawable.java:178) 06-27 20:24:41.954: E/AndroidRuntime(532): at android.graphics.drawable.Drawable.createFromXmlInner(Drawable.java:867) 06-27 20:24:41.954: E/AndroidRuntime(532): at android.graphics.drawable.Drawable.createFromXml(Drawable.java:804) 06-27 20:24:41.954: E/AndroidRuntime(532): at android.content.res.Resources.loadDrawable(Resources.java:1920) I know that directly accessing @color/legacy_pressed_highlight or @color/holo_blue_light instead of accessing them through the colorPressedHighlight fixes the crash but it does not solve the problem. Themes can vary, hence I need to access it through the colorPressedHighlight attribute. PS: I had a similar problem to which I haven't found an answer yet. Can someone please help!

  Read the article

• Crop and Resize Image to Specific Dimensions

  - by Crunchy

  I need some help cropping and resizing images using CSharp.net. My goal here is to take an image and reduce it to 50px by 50px. The following code I found here will do that, however it's scaling the image as well. Ideally I want to scale the image down to as close to 50px by 50px as possible and then remove the parts of the image that are outside 50px by 50px. public Image ResizeImage(Image img, int width, int height) { Bitmap b = new Bitmap(width, height); using (Graphics g = Graphics.FromImage((Image)b)) { g.DrawImage(img, 0, 0, width, height); } return (Image)b; }

  Read the article

• Jdeveloper vs java/j2ee/js+extjs ?

  - by ssgam

  Hi All, i am new to the web development environment, having came from a unix/c environment. i've been recently asked to create a web app, which i thought would require postgresql, java/j2ee, and javascript for the client interface. as i had wanted a nicer gui, i've been reading up on extjs, which looks really nice to me. a colleague mentioned that the time needed time needed to learn all these various pieces is time consuming, and Jdeveloper seems to provide most of what we'd need (i was shown a demo, which appears to be able to generate some nice web interfaces). what are the pros and cons with the different approaches ? some i can think of: - jdeveloper is an integrated ide, which creates UI easily, tightly integrated with database. (pro) - jdeveloper will be heavier? (con) - wizard generated code may be harder to refactor ? (con) - java/j2ee/js+extjs needs to develop things from ground up (con) thanks in advance for sharing your experiences and thoughts ... sam

  Read the article

• Embedded BI for ASP.NET

  - by Michael Shimmins

  Can anyone recommend a decent business intelligence & reporting application that can be integrated into an OEM application? Primary requirements are: Administrators can define cubes/dimensions etc (or we - the OEM - can predefine some) Report designers can easily inspect data by visually selecting dimensions, filters etc in an adhoc way that is quickly output with little upfront investment Report designers can design a report based on dimensions/filters and save their definition to be run as required Report viewers can view the reports defined by the report designers All of this plus in .NET that can be branded/integrated into our existing web application's look and feel. Permissions need to work off our user/groups system. I've found a few that look good, but they are all in Java and I don't want to ask our clients to install ASP.NET for the app, and then Java, tomcat etc just for reporting. Thanks

  Read the article

• How to setup matlab for parallel processing on Amazon EC2?

  - by JohnIdol

  I just setup a Extra Large Heavy Computation EC2 instance to throw it at my Genetic Algorithms problem, hoping to speed up things. This instance has 8 Intel Xeon processors (around 2.4Ghz each) and 7 Gigs of RAM. On my machine I have an Intel Core Duo, and matlab is able to work with my two cores just fine. On the EC2 instance though, matlab only is capable of detecting 1 out of 8 processors. Obviously the difference is that I have my 2 cores on a single processor, while the EC2 instance has 8 distinct processors. My question is, how do I get matlab to work with those 8 processors? I found this paper, but it seems related to setting up matlab with multiple EC2 instances, which is not my problem. Any help appreciated!

  Read the article

• How to add a whole directory or project output to WiX package

  - by Coincoin

  We decided to switch from VS integrated setup to WiX. However, what we currently do is use projects output files as the input for the setup project. This lets us easily add Application Files to a directory (for images, samples, and other resources...) and those files are automatically added to the setup when we build. I could not find any similar feature in WiX. WiX seems to require one Directory entry and one File entry for each and every directory and file. This would require us to change the WiX source everytime a file is added which, to my eyes, is prohibitive since we have so many of them. Is there any integrated way of doing that with WiX or do I have to write my own task that will create a WiX source before calling candle?

  Read the article

• Customize ToolStripMenuItem

  - by Lu Lu

  Hello everyone, I want to customize ToolStripMenuItem by overriding OnPaint function. This is a MyToolStripMenuItem: public class MyToolStripMenuItem : ToolStripMenuItem { public MyToolStripMenuItem() :base() { } public MyToolStripMenuItem(string t) :base(t) { } protected override void OnPaint(PaintEventArgs e) { Graphics g = e.Graphics; Rectangle r = this.Bounds; g.FillRectangle(Brushes.Blue, r); g.DrawString(this.Text, this.Font, Brushes.Red, r); } } In my code, I will fill a blue color in item's bound. Now, I will create a list of items on menustrip: MyToolStripMenuItem1 |___MyToolStripMenuItem2 |___MyToolStripMenuItem3 I don't know why MyToolStripMenuItem3 don't have a blue background. This is my source code: http://www.mediafire.com/?2qhmjzzfzzn Please help me. Thanks.

  Read the article

• Will html5 change everything for designers?

  - by Sean Thompson

  What impact do you think html5 will have on the workflow/way graphic design is done for the web? Right now most designers stay in an Adobe tool, doing most of the design work there, and implement some elements with graphics and some with code. Checking out http://www.apple.com/html5/ it seems that almost everything done in a graphic can be done in code. Will designers have to learn very advanced levels of html5 and do the actual design work in the browser or do you see a more "designer friendly" gui being made for html/graphics work? Will tools like photoshop evolve in a way that handles this new lack of image files?

  Read the article

• AHCI Driver for own OS

  - by user1496761

  I have been programming a little AHCI driver for two weeks. I have read this article and Intel's Serial ATA Advanced Host Controller Interface (AHCI) 1.3. There is an example, which shows how to read sectors via DMA mode (osdev.org). I have done this operation (ATA_CMD_READ_DMA 0xC8) successfully, but when i tried to write sectors (ATA_CMD_WRITE_DMA 0xCA) to the device, the HBA set the error Offset 30h: PxSERR – Port x Serial ATA Error - Handshake Error (this is decoding from Intel AHCI specification). I don't understand why it happened. Please, help me. In addition, I have tried to issue the command IDENTIFY 0xEC, but not successfully...

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >