Search Results

Search found 11395 results on 456 pages for 'intel integrated graphics'.

Page 173/456 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• Should I use OpenGL or DX11 for my game?

  - by Sundareswaran Senthilvel

  I'm planning to write a game from scratch (a BIG Game, for commercial purpose). I'm aware that there are certain compute libraries like OpenCL, AMD APP SDK, C++ AMP as well as DirectCompute - both from MS (NOT interested in CUDA) are available in the market. I'm planning to write the game from the scratch, which includes the following engines... Physics Engine AI Engine Main Game Engine (... and if anything is missed). I'm aware that, there are some free physics engine libraries in the market. Not sure about free AI engine libraries. I'm bit confused in choosing between the OpenCL, AMD APP SDK, and C++ AMP libraries (as already mentioned i'm NOT interested in CUDA). I want my game to be published in Windows/Android/Mac OSX. It means it should be a cross-platform game. I will be having "one source code" that i'll compile for various platforms like Windows/Android/Mac OSX, and any others if i missed. Note: Since I'm NOT a Java guy, kindly do NOT suggest me the Java Language. For Graphics language should i use OpenGL or DirectX 11? I have heard that OpenGL runs on a single core, and not sure of DirectX 11. Between OpenGL and DirectX which one should i follow? or else, are there any other graphics language that i need to start with? I want to make use of the parallelism in GPU as well as CPU.

  Read the article

• What is the program "Additional Drivers" (jockey-gtk) talking me about?

  - by Robert Vila

  The program says: "No proprietary drivers are in use on this system" But it doesn't say if it is talking about graphical drivers only or what. Then, it lists two drivers: NVIDIA accelerated graphics driver (version 173). NVIDIA accelerated graphics driver (version current) [recomended] Both have exactly the same description. What is the difference then? When I select the 1st one, it says: "This river is not activated",and there's a button to "activate" it. When I select the 2nd one, it says: "This river is activated but it is not currently in use", and the button is to "remove". So which one is in use? Why or what for should I have activated (enabled) and not in use? If it is in use it is activated? What is the difference between activate and remove? and what is the relationship between installed, activated, in use, enabled and removed, disabled, inactive and not-installed? Why can I activate the inactivated and remove (but not deactivate) the activated that is not in use? All this is very puzzling... What other drivers can I use for an Apple MacBook pro 3,1 and how? I see that there's a nouveau and I heard that there was going to be a new open source even better. > -display > description: VGA compatible controller > product: G84 [GeForce 8600M GT] > vendor: nVidia Corporation

  Read the article

• Ubuntu is not detecting my android device

  - by user3514160

  I am new to android. I have just downloaded and installed android sdk. Now when I run the application from eclipse, my device is not getting detected. I have googled and was brought up with this as my solution, but that also didn't worked. Here's the 51-android.rules SUBSYSTEMS=="usb", ATTR{idProduct}=="0bb4", ATTR{idProduct}=="0c03", MODE="0666", GROUP="plugindev", OWNER="<username>" After that I rebooted my laptop, and ran this command: username@laptopname:~/Android/adt-bundle/sdk/platform-tools$ adb devices The output i get is: * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached ???????????? no permissions EDIT crazydeveloper@crazydeveloper:~$ lsusb Bus 002 Device 004: ID 0bb4:0c03 HTC (High Tech Computer Corp.) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b337 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/004/ ls: cannot access /dev/bus/usb/004/: No such file or directory crazydeveloper@crazydeveloper:~$ Edit: 2 After the answer submitted here's the output that i got: crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/002 total 0 crw-rw-r-- 1 root root 189, 128 May 7 09:45 001 crw-rw-r--+ 1 root root 189, 129 May 7 09:45 002 crw-rw-rw- 1 root plugdev 189, 130 May 7 09:48 003 I am using Micromax Canvas 2.2 A114 - Android Version 4.2.2 Please help me. Thanks.

  Read the article

• 13.10 Saucy login issues; black screen, loop, and freeze

  - by user135598

  Once upgraded to I 13.10 I was not able to get past the login screen. I had the black screen. Also; I can not log on with low graphics mode from recovery either. It makes no difference if I try default graphics driver or not. Then after running sudo install -f from recovery root prompt I got a login loop. I have purged fglrx, fglrx-legacy, and nvidia-current. I updated my repository with xorg-edgers and reinstalled nvidia-current. Now it semi-freezes at the login screen when I try to log on as my normal user. I say 'semi' because I can still use my mouse to click on the upper right hand Ubuntu logo and Shut Down or Restart the PC. I still cannot log on with my user name, but I can through the Guest login. While logged in as Guest I added a new user account with administrative privileges. I CAN log into this account without problem and from here am able to see that my .dmrc file in my original account reads: [Desktop] Session=XBMC I have changed 'Session=XBMC' to 'Session=ubuntu' and rebooted, but to no avail. The file resets itself and makes a backup of my changes. Any help would be greatly appreciated.

  Read the article

• Ubuntu 12.04 won't shut down - stopping winbind daemon

  - by jan

  My Precise Pangolin sometimes won't shut down - the screen is black with text on it. Mostly last line says something like "stopping winbind deamon" (sometimes also virtualbox, which is above winbind daemon; edit: sometimes the last line says "running unattended updates") and it stays like this for about ten miutes. Then I usually hold the power button for 5s to shut it down. It's very unpredictable - sometimes the computer shuts down without problem and sometimes it hangs. I've tried many ways to shut it down: HW button, panel applet, sudo shutdown -h now, sudo poweroff, sudo halt, etc. even sudo reboot or restart from panel applet have this problem. Sometimes it works ok but every method named hung at least once on the same (damned) line. My specs: FUJITSU SIEMENS LIFEBOOK E8310, Intel Core2 Duo T7300 @ 2.00GHz, 3GB RAM, GPU: Mobile Intel(R) 965 Express Chipset Family Ubuntu 12.04.2 32bit, 3.5.0-41-generic kernel (but it did it on older kernels and 12.04.x systems too). Any ideas what should I try next? Thanks a lot! Jan

  Read the article

• Never before had a problem with Ubuntu desktop graphical display; Trying to use nvidia GT630

  - by focaccio

  I've been using ubuntu since 9.04 and never had a problem with Ubuntu brining up the desktop graphical user interface. However I am currently not able to see anything graphical past the install screens. I have an Intel DP55KG motherboard and just installed an nvidia gt630 graphics card (zotac), since the old graphics card failed. I can install the server and see text. So I do a apt-get install ubuntu-desktop...or apt-get install kubuntu-desktop...or apt-get install xubuntu desktop, but after the reboot there is no display...its like something is hung up. I tried using the Live quantal dvd and I do see the graphical prompt to try without installing, but after that the screen goes blank. I've tried two monitors and the same thing happens. There is a faint "glow" on the screen and I do not get a "no input signal" from the monitor, so something is happening. I can install an old OEM of XP so I know the video card and motherboard are at least semi functional. Any help is appreciated. Thanks, Greg

  Read the article

• Strange resolution on Ubuntu 11.10

  - by FSchmidt

  I only just installed Ubuntu 11.10, so excuse me if this question is silly ;-) I have a Fujitsu Esprimo Mobile V655, nvidia 8200 graphics, and recently installed Ubuntu 11.10 using wubi. I had to modify booting commands to include nomodeset; otherwise Ubuntu would not boot. Now I did set my screen resolution to 1280 x 720, which is the correct resolution for this screen. Still, the display seems imperfect. The font sizes seem unnatural(too large / stretched) and text is quite blurry (especially in Firefox). Could it have something to do withe the nvidia graphics driver and/or the nomodeset parameter? How can I fix this? Update: I used jockey-gtk to update nvidia to the current version. This improved the resolution dramatically (no blurriness, fonts are good). It also means that I no loger need to include nomodesetin the boot commands. However, other problems were brought up by this. It seems that certain files cannot be accessed - icon (images) are missing, some task bars are completely unstyled (grey, block-form, win97 style). I also get this error message(roughly translated from German, so may be slightly different from actual) every time I reboot: Could not apply the stored configuration for the monitor: none of the chosen modi is compatible with the available modi. I have tried nvidia-xconfig, unity --reset , no improvements. Can anyone help, please?

  Read the article

• What is the R Language?

  - by TATWORTH

  I encountered the R Language recently with O'Reilly books and while from the context I knew it was a language for dealing with statistics, doing a web search for the support web site was futile. However I have now located the web site and it is at http://www.r-project.org/R is a free language available for a number of platforms including windows. CRAN mirrors are available at a number of locations worldwide.Here is the official description:"R is a language and environment for statistical computing and graphics. It is a GNU project which is similar to the S language and environment which was developed at Bell Laboratories (formerly AT&T, now Lucent Technologies) by John Chambers and colleagues. R can be considered as a different implementation of S. There are some important differences, but much code written for S runs unaltered under R. R provides a wide variety of statistical (linear and nonlinear modelling, classical statistical tests, time-series analysis, classification, clustering, ...) and graphical techniques, and is highly extensible. The S language is often the vehicle of choice for research in statistical methodology, and R provides an Open Source route to participation in that activity. One of R's strengths is the ease with which well-designed publication-quality plots can be produced, including mathematical symbols and formulae where needed. Great care has been taken over the defaults for the minor design choices in graphics, but the user retains full control. R is available as Free Software under the terms of the Free Software Foundation's GNU General Public License in source code form. It compiles and runs on a wide variety of UNIX platforms and similar systems (including FreeBSD and Linux), Windows and MacOS."

  Read the article

• LiveCD/USB boot issues with Ubuntu 12.04 on blank drive

  - by Richek

  Not sure how common this issue is, or even how badly I may be missing something simple, but I am a first time usuer having some serious problems. Some background: old HDD running Windows 7 developed too many bad sectors and is bricked. I'm attempting to install Ubuntu 12.04 on a fresh 1TB drive by booting from a liveCD USB flash drive. I've not been able to get past the initial menu screen, however, as the process stalls out shortly after selecting an option (both boot from drive and install to drive). I've tried multiple USB drives as well as CDs, modified the boot order, flashed BIOS, and even tried booting with only the flash drive and the keyboard connected with the same results.Typically what I observe is that the OS begins what I think is compliling, listing drivers and components before freezing on one. When the keyboard is plugged in, its the keyboard driver, before I flashed BIOS, it was a BIOS related item, now its an unknown entry. The computer seems to be reading the drive (idicated by USB light flashing or CD drive reving) for roughly 10 minutes with no progress, followed by the drives going quiet. Some spec info: Motherboard: ASUS P5Q Pro, BIOS version 2102 (latest version), Intel chipset CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz help would be appriciated!

  Read the article

• Randomly Freezes - How Can I Diagnose the Problem?

  - by j0rd4n

  At random times, Ubuntu 10.04 freezes, and I have to do a hard shutdown. It was upgraded from 9.10 which didn't freeze. First, is this is common problem with a quick answer, and if not, what can I do to diagnose it? I've tried checking application/kernel logs, but nothing gives me a clue as to what caused the problem. My guess, is that since the OS froze, no logs could be updated. Ideas? SOLUTION: Solved it. My particular problem was my graphics card (integrated Radeon 9000 series). netconsole revealed I was getting the error: "reserve failed for wait". After trial-and-error, I manually configured my video card and disabled hardware acceleration. Completely fixed the issue. Here is what I did: Manually Created xorg.conf Ubuntu automatically configures xorg.conf and doesn't use a file. To edit this file, you have to tell Ubuntu to explicitly create one and then edit it. Here are the steps: Restart system Hold Shift as GRUB boots Select root terminal in GRUB login menu Execute: X -config xorg.conf.new Copy: cp xorg.conf.new /etc/X11/xorg.conf Disable Hardware Acceleration The following is specific to my Radeon card, but I'm sure other cards have a similar setup. Edit xorg.conf Find "Device" section for graphics card Uncomment "NoAccel" option and set to "True" Save + reboot Hope that helps.

  Read the article

• What's the right/standard way of achieving separation of concerns?

  - by Ghanima

  Some background: I want to start developing games, and taking some of the advice given in this site, I've started with something simple and familiar, such as pong, tetris, etc. I want to take as much time as needed to make sure that I have the basics right before moving on to something bigger. I have medium programming experience but I realize making games is a different thing. I find myself wondering many things like should this be in a separate class? Should this module handle this stuff or is it better to let other modules have that kind of functionality? For example, the bouncing of a ball in pong, right now is handled in the ball module, but maybe it's better that some other module did it. Right now I have different modules: one for the graphics, one for the game logic, and others for the objects (depending on the kind of movement required, not all the objects are alike). I know I am asking a lot, any tips you have will be very much appreciated. Short question: What's the right or standard way of separating the modules? What have you found most effective? Is it enough to just keep the drawing (graphics) and the logic separate? Is it necessary to have a lot of classes? (for example for the objects in the game, to handle the movement, etc)

  Read the article

• How do I get a Dell Latitude e6420 working?

  - by David_G

  I've just installed Ubuntu 12.04 (64-bit) on a brand new Dell Latitude e6420, and I'm having a few problems. This laptop has an Optimus (?) setup - i.e. integrated gfx and an Nvidia Quadro NVS 4200M. First problem - I ran setup, etc, and discovered that I can only run unity2d - If I try and login with unity3d, it just defaults to 2d. This is with nvidia-current installed (302.07). Note also that I can't run nvidia-settings ("You do not appear to be using the NVIDIA X driver."), and there is no additional drivers found ("No proprietary drivers are in use on this system"). I tried to troubleshoot this, and removed nvidia, leaving (I guess) just Nouveau drivers - In that case, unity3d did work, but I was stuck with the open source Nouveau drivers powering the integrated graphics. So, obviously, I want to run unity3d, and be using the more powerful Nvidia graphics card. I've tried a bit of tinkering around, but I'm not sure the best way to proceed, or perhaps more importantly, I'm not sure of what the best final solution might be. I've heard about bumblebee - but frankly, I would prefer to have the proprietary Nvidia drivers working properly. Any help would be much appreciated!

  Read the article

• Having extreme issues getting Compiz working on Ubuntu 11.10 (32-bit)

  - by Josh Hornell

  I have been working very hard the past few days to try to get Compiz configured and working correctly but I have been running into a lot of issues. I first installed the CompizConfig Settings Manager and tried different features such as the desktop cube and couldn't get any of them to work. Then I read that I may not have the right graphics card drivers installed (Nvidia GT540m). So I went into the Additional Drivers tool and it shows that 'no proprietary drivers are in use on this system', which struck me as a bit odd as when I very first installed Ubuntu it showed that my Nvidia drivers were installed an active until I downloaded and installed the updates to Ubuntu and since then it's shown empty. I then tried to install my graphics card drivers manually via this article How do I install the latest Nvidia drivers via the Additional Drivers tool?. I rebooted and had no issue although I tried to go back into the CompizConfig Settings Manager and couldn't get anything to work as well as my Additional Drivers tool still showed no drivers installed. I feel like I've tried about everything I can think of and any help would be much appreciated!

  Read the article

• Multi-screen and Nvidia GT220

  - by Bohors

  Excuse me first for my broken English I have 3 monitors on two Nvidia GT220. Unity 2D works fine after using the proprietary drivers. But no way to use compiz effects. I'm on Ubuntu 11.10 (I also tested for curiosity 12.04 for the same result) I noticed in the "System Settings" / "details" that my graphics card is not recognized (graphics card "unknown") and "View" only returns me my first screen (with the correct resolution) also in unknown. $ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 05:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) xorg.conf : Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Below "Screen0" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "LG Electronics L1920P" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 0 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60_0 +0+0; nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Have you any idea? thanks

  Read the article

• Information about rendering, batches, the graphical card, performance etc. + XNA?

  - by Aidiakapi

  I know the title is a bit vague but it's hard to describe what I'm really looking for, but here goes. When it comes to CPU rendering, performance is mostly easy to estimate and straightforward, but when it comes to the GPU due to my lack of technical background information, I'm clueless. I'm using XNA so it'd be nice if theory could be related to that. So what I actually wanna know is, what happens when and where (CPU/GPU) when you do specific draw actions? What is a batch? What influence do effects, projections etc have? Is data persisted on the graphics card or is it transferred over every step? When there's talk about bandwidth, are you talking about a graphics card internal bandwidth, or the pipeline from CPU to GPU? Note: I'm not actually looking for information on how the drawing process happens, that's the GPU's business, I'm interested on all the overhead that precedes that. I'd like to understand what's going on when I do action X, to adapt my architectures and practices to that. Any articles (possibly with code examples), information, links, tutorials that give more insight in how to write better games are very much appreciated. Thanks :)

  Read the article

• Kubuntu not showing eth0

  - by Laurbert515

  I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

  Read the article

• Freeze on Boot WindowsXP

  - by kyle

  Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

• How to debug a fatal system crash - [graphical loop DOTA2]?

  - by Huw

  Whilst playing DOTA2, I occasionally and apparently randomly seem to be experiencing a fatal crash where the display freezes fixed and the audio loops over approx the last .5 of a second. Now, I'm interested in resolving this - but my trouble is I don't know where to start. The error appears non-reproducible (I've tried returning to games and deploying the same combination of events in hopes of pinning to to a certain shader etc), and I don't know which part of 'the stack' it might be coming from. Variables that occur to me: I custom build this system, did I do something wrong - is my PSU not providing enough power to the graphics card? I am running Steam and DOTA under Linux, could this new software have a bug Might it be something to do with my ATI Catalyst graphics drivers Is some other background process interfering I'm usually mid game when this occurs, so i quickly kill the power and reboot (when i'm lucky i can get back in with only 1-2 mins lost!). So my question here relates to logs. Where should I start to look or how might I set up logs to help me pin down a fatal crash of this kind by recording moments up to / before a crash and is this likely to be something I should push Steam to do, or is there something at a system level? Then perhaps I can return with a more specific question and perhaps even a bug report :) Many thanks in advance.

  Read the article

• LiveCD not booting/can't install Ubuntu 11.04

  - by user20318

  So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

  Read the article

• Enabling GTX 570

  - by Silas

  Hello i just built up my new system: Asus Rock Z77 Extreme 4 Intel i7 3770k 16 Gb Corsair Ram Zotac Nvidia GTX 570 bequiet! 630W Power supply 120 GB SSD So after i installed UBUNTU 12.04 64 bit. It ran smoothly. I downloaded and installed all the recommended updates. After checking the Sytem details the GTX 570 didnt show up as graphics unit. so i figured i needed to download the drivers. So i did but being a complete newbie to linux i didnt succeed in installing them. (I think) Anyway after several tries and errors i shut down the PC and restarted it. Resultung in do Signal to my screen after trying to reboot and all the monitor outs with no result i took out the graphic card and now it boots normally but after booting it says there is a problem with the system the graphics cant be recognized something something. So Question A: What do i do? I Like linux but the arbitrarity of the Errors that occur without any changes to the system scare me. Question B: Is there A beginners guide to Ubuntu where i could start from scratch because i really want this to work? Question C: Now that the System is (suddently) showing these graphic errors So far without visible consequence despite the error message. should i reinstall the GPU and give the driver installation another try or the other way around? Ill be very grateful for any help. Thank you in advance!

  Read the article

• Screen flickering / scrambling on an Asus UL30A

  - by user55059

  Recently my Laptop screen started to flicker. You can view the phenomena here: YouTube Sometimes the screen is totally scrambled, but most of the time it starts with the Title bar only. It happens inconsistently. My Laptop is Asus UL30A and I'm using Ubuntu 11.10. Output from command: sudo lshw -C display; lsb_release -a; uname -a; xrandr *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fe400000-fe7fffff memory:d0000000-dfffffff ioport:dc00(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:fe800000-fe8fffff LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric Linux steelke 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) I already rolled back the kernel to 3.0.0-14 instead of 3.0.0-17 as mentioned in this post, but without result. I guess the problem is related to the driver, because I don't see similar behaviour in the BIOS Setup. Any tips or help is welcome.

  Read the article

• Sound not working with Ubuntu 12.10 clean install

  - by ZooRocket

  Did a clean install of Ubuntu 12.10 from 12.04 and the sound is not working now. In 12.04 it worked out of the box. I ran hwinfo --sound > hal.1: read hal dataprocess 4222: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 10: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb.ekgK5auW5RA SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01de Revision: 0x01 Memory Range: 0xfdffc000-0xfdffffff (rw,non-prefetchable) IRQ: 11 (no events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001DEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Not sure how to proceed to fix this. Has also worked prior to this version.

  Read the article

• background in JAVA [closed]

  - by leen.zd

  how can i put a background image in my java code? this is my code... what's error? import java.awt.Container; import java.awt.Dimension; import java.awt.Graphics; import java.awt.image.BufferedImage; import java.io.File; import java.io.IOException; import javax.imageio.ImageIO; import javax.swing.JFrame; import javax.swing.JPanel; public class background extends JFrame { private Container c; private JPanel imagePanel; public background() { initialize(); } private void initialize() { setDefaultCloseOperation(EXIT_ON_CLOSE); c = getContentPane(); imagePanel = new JPanel() { public void paint(Graphics g) { try { BufferedImage image = ImageIO.read(new File("http://www.signe-zodiaque.com/images/signes/balance.jpg")); g.drawImage(image, 1000, 2000, null); } catch (IOException e) { e.printStackTrace(); } } }; imagePanel.setPreferredSize(new Dimension(640, 480)); c.add(imagePanel); }

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >