Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 176/301 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• Why is this LTO4 Tape-drive not working

  - by Tim Haegele

  # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

  Read the article

• Speedup vmware esx guest hdd access

  - by Uwe

  Hello, we run several windows servers and windows clients on our vmware esx. One of the Windows 2003 Servers is a build-server with major HDD-reads/writes. as it is our build server. This machine was a hardware before and was virtualized to the ESX. Is there any way to increase the HDD-Performance? Perhaps there are special windows (guest) drivers? The files are stored on a Raid6 base. Performance graph of vmware infrastructure client shows reads up to 650 KBps and writes up to 4000 KBps. Thank you. Regards, Uwe

  Read the article

• Is it possible to rate-limit an scp/sftp/rsync/etc transfer from the command-line? ie, manual QoS on

  - by warren

  Specifically, I am looking to rate-limit an scp or sftp session (or other arbitrary network call) in the call itself. For example, let's say I want to copy 100MB to one server, and 1GB to another. I'd like to be able to run both of these at the same time, but maintain a QoS for "normal" computer usage - somewhat similar to how you can rate-limit bittorrent. Is there a way to do this without touching the networking hardware? I'm envisioning something akin to: magic-qos-tool 'scp file user@host:/path/to/file' Or.. scp -rate 40kbps file user@host:/path/to/file

  Read the article

• Can't download updates for reinstalled Office 2000 on WinXP OS "expected version not found" error message

  - by mpmadigan

  I replaced HD and reinstalled WinXP Pro and successfully downloaded all of the service packs and security updates. I've reinstalled my licensed version of Office 2000 (upgrade version from Office 97). The software installs and is functional; but when trying to install updates SR-1 or SR-1a or any individual security update I get error message "expected version of product not found". Microsoft no longer provides support for this legacy version of office. I can't find any support documents in Microsoft's database that addresses this issue. This is my sister's computer and I've already come out-of-pocket $100 for hardware (not counting the $$hours of labor). She only uses MS Word for minimal correspondence. No desire to spend $100+ for new version of Office. I would greatly appreciate any suggested fixes for this problem.

  Read the article

• IPSEC Windows 2008 <--> Fortinet 60B

  - by Elijah Glover

  I am trying to establish a IPSEC vpn, between an office DSL connection and a single virtual machine. I have done hub-spoke stuff before with cisco and fortinet routers, never hardware <-- software. Fortigate 60B - 10.20.1.1/24 Windows Server 2008 r2 Installed On VM I have seen some guides, to do this with juniper screenos (guide uses first release of 2008, they introduced windows firewall with advanced security), but none using fortinet equipment. Anyone ever been successful? Or should I install RAS/PPTP, so I can dial in?

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Horizontal scrolling not working in Windows 7 running on MBP using Boot Camp

  - by Rubicon

  Is there a way to enable horizontal scrolling on Windows installed on a bootcamp partition of MBP 13" Core 2 Duo, using a trackpad? I had a look into the Boot Camp Control panel settings, but could not find a setting that suggested this. I used the Boot Camp drivers that came with the MBP in the Mac OS X Install disk. The vertical scroll is working fine, and the horizontal scroll works fine in the Mac world of things, so the hardware is fine. I think maybe there might be an additional install for a driver that we may have to install? Or any update? Thanks in advance for all your help. :)

  Read the article

• Keyboard automatically disconnects and reconnects

  - by Algorithms

  The problem i am facing is the keyboard (USB) automatically disconnects when there is a fluctuation in the power supply to the speaker. The speaker and the pc both draw power from a apc ups. The fluctuation occurs because the speaker plug is not tightly connected to the ups power outlet. It is okay for normal work, but a accidental jerk causes the fluctuation. However after some amount of time (usually within 5 seconds) the keyboard automatically reconnects and windows plays the sound of hardware connected. This problem will also occur if I manually take out the speaker power cable from the ups power outlet. My question is whether the problem I am facing is due to electrical issues, or due to software problems. PC config: OS : Windows 7 Ultimate UPS : APC 600 VA PSU : Corsair TX 650 Speaker : Realtek

  Read the article

• 3 monitors + a TV on a single card with Eyefinity?

  - by Paul Accisano

  Greetings all, Right now I have a fairly standard video card with 2 DVI ports, one powering my single monitor and another powering my HDTV (with a DVI-to-HDMI cable), which are in separate rooms. I never need to have my monitor and TV active at the same time. I'm looking into a possible computer upgrade. I'd like to know if the following situation is possible. I want three monitors on my desk powered by a single card, which I hear these new Eyefinity cards are capable of. But, I also want my TV hooked up. At any given time, I would want either my three monitors active or my TV active, never both at once. So it seems to me it might be possible to do this all a single 3-port card with a splitter of some kind. Is this possible? What hardware would I need? Thanks!

  Read the article

• AutoCAD 11 and network file shares

  - by gravyface

  Small network of perhaps half a dozen engineers, currently working on local copies of AutoCAD project files, which are then copied back up to file server (2008 Standard, 1-2 year old Dell server hardware, RAID 5 SAS disks (10k? not positive)) at end of day. To me, this sounds horribly inefficient and error-prone, however, I've been told that "AutoCAD and network files = bad idea" and this is gospel. The network is currently 10/100 (perhaps this is the reason for the "gospel") but all the workstations are within 2 years old and have GbE NICs so an upgrade of the core switch is long overdue. However, I know certain applications don't like network access, at all, and any sign of latency or disruption brings the whole thing crashing down. Anyone care to chime in?

  Read the article

• WHEA_UNCORRECTABLE_ERROR BSOD - what is wrong?

  - by Arcane

  Hello I have a problem with my PC getting the WHEA_UNCORRECTABLE_ERROR bsod. It is a few months old pc. I am not overclocking or changing anything in bios, but sometimes (this is my third time) I get this bsod out of nowhere. This last time I was just watching some stream on twitch when the pc suddenly crashed. I have everything up to date in windows update and every other driver as well. Everything in Open hardware Monitor seems ok. Right now as of 10 min after the crash, the CPU temp is at 38°C, fans are at 1400RPM I am using Windows 8.1 Pro 64b. Here are my spec: Intel i5-4570 CPU @ 3.20GHz, Kingston HyperX 8GB DDR3 1600 XMP, GeForce GTX 660 with 340.52 drivers, Corsair VS450 power supply, Gigabyte GA-H87-HD3 you can see the BSOD dump here: https://www.dropbox.com/s/88i1q2nnqnpzux1/082514-29656-01.dmp?dl=0 Can anybody tell me what is wrong?

  Read the article

• Home ZFS based NAS...What processor/chipset to use?

  - by MrBlargityBlarg

  So, I'm building a home/personal NAS. My plan is to expose both SMB fileshares for sharing files/media between hosts, but also to carve an iSCSI target LUN out of it for use by VMWare as a datastore. I want to use ZFS (software RAID) so that means I'll either be using FreeNAS, Solaris Express, or OpenIndiana. My question is basically: How much horsepower do I need? Obviously I/O is going to be my bottleneck but I want to be sure that I am not limiting my I/O because of a slow processor or chipset. So far the hardware plan is to use an Intel i3 and motherboard with one of the H87, Q87, or Z87 chipsets, a SAS controller (JBOD, no RAID) and if budget allows, I'm also hoping to get an SSD for the ZFS L2ARC and ZIL. Does anyone think I could get away with an Intel Atom or cheaper/less-capable processor/chipset than the i3 and [HQZ]87 listed above?

  Read the article

• iMac G5 20" (First All-In-One White Screen) Cannot Connect To Internet

  - by Goober

  The Scenario I've got an iMac G5 20" (First All-In-One White Screen) PPC. It has an Airport Extreme Network card in order to wirelessly to connect to the internet. For the most part I connect using ethernet as opposed to wirelessly, but recently have had the need to connect using the wireless. The Hardware BT Home Broadband Wireless Router. iMac G5 20" From about 5 years ago (First All-In-One White Screen) The Issue Even though I know for a fact that It has connected to the internet wireslessly in the past, for some reason it can discover the wireless router, but upon entering the password it fails to connect. I have tried multiple times to no avail. I have 2 other Mac's on the network and a pc that can all connect wirelessly. However both the mac's. Question Any ideas as to why my really old iMac G5 can't connect wirelessly anymore!?

  Read the article

• Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

  - by GregC

  I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

  Read the article

• Primary domain controller has crashed, secondary does not log in

  - by Hosm

  Hi everybody, I had a primary domain controller on machine A and a secondary one on machine B in my AD domain. Due to some hardware/software problems, I decided to migrate the role of primary domain controller to machine B. Unfortunately, machine A has totally crashed and does not boot. Now I can not even log in to machine B (which itself was a controller in the domain). I need to log into machine B then choose it as the primary controller. I already have synced DNS and AD info. when machine A was alive. Anyone can provide an idea?

  Read the article

• RAID1 Hard drives with Intel Controller

  - by Dave_H

  I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

  Read the article

• Wireless networking on Gnome on Ubuntu 9 / 10

  - by WaveyDavey

  So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

  Read the article

• Connecting to Aerohive APs from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

• What is a usable throughput for a home media server

  - by Craig

  I am looking to setup a home server that will act as a media server. This will include both video (possibly HD) and audio. The clients will be a fun mix of hardware but that is a different question. What I want to know is what is the minimum throughput for streaming video without hitches? Is there a "sweet" spot for throughput (price vs. throughput)? I am determining my budget for this "upgrade" and I need to evaluate wether or not upgrading to a 1 Gbps home LAN is required. Sure, it would be sweet and easily handle the traffic but I don't want to do it unless it is necesary.

  Read the article

• Is there any reason to subnet a home network?

  - by Will

  For networks I understand we set a netmask on each computer to let it know what IPs it can talk to without going through the router - IPs on the same subnet can talk directly to each other and do not have to go through a router/switch. However, in today's home networks (and I suspect corporate networks as well) every computer is connected to a router/switch (at the low cost of today's hardware I doubt there it much of a market for wired repeaters/hubs). This seems to obviate the need for a subnet mask and subnetting. Considering that in most modern home architectures every computer goes through the router, even to talk to computers on the same network, is there any reason for me to subnet a home network?

  Read the article

• Mainstream Linux on 1GB HDD

  - by Ariel Nundi

  Hi, I've decided to start learning Linux + Ryby + RoR. The problem is the only personal computer I have is a laptop with 1GB flash card and I can't afford to buy more hardware right now. The laptop has dual core CPU and 2GB of RAM. Can you recommend a Linux distribution I can install? I've tried the netbook version of Ubuntu, but install failed because of lack of space. I'd prefer a more popular distribution, so I can use my skills say on a job. TIA

  Read the article

• Patch Management and System Inventory on a Windows network?

  - by Scott

  What are some good ways to have patch management and systems/hardware inventory for a Windows (Server 2003 or 2008) network? For example, at a minimum knowing the basics for all the machines out on the network such as OS version, patch level, what hotfixes they have, processor, ram, etc. Even better would be knowing more details such as peripherals. Ideally if there were a way to push service packs, and hotfixes (and other software?) to the machines, that would be great. What are some options for this?

  Read the article

• MySQL 5.5 on Windows server is horribly slow

  - by Brad

  I have had no luck getting MySQL 5.5 to be as fast as 5.1 or MariaDB on the exact same hardware/database/environment under Windows server 2003R2 or 2008R2. My benchmarks from our application: MySQL 5.5 + CentOS 5.2 (XenServer Virtual) = 28 seconds (box is "busy" not buried) MariaDB (5.1) + Windows 2003 (Physical box) = 130 seconds (box is 2% busy) MySQL 5.1 + Windows 2003 (Physical box) = 170 seconds (box is 2% busy) MySQL 5.5 + Windows 2003 (Physical box) = 305 seconds (As high as 600 seconds...) (box is 2% busy) The only difference between these runs is the removal of skip-locking and the running of mysql_upgrade.exe to update some tables for stored procs on 5.5. Yes, I know it's a release candidate, I'm feeding that back to MySQL as well. No slow queries are logged, it doesn't think it's being slow, it just is. I'm going to start tearing into the queries themselves to see if the INSERT/SELECT plans have gone buggo on 5.5. Any help would be appreciated! Thanks

  Read the article

• Do different operating systems have different read and write speeds?

  - by Ivan

  If I have two different operating systems, such as Windows 8 and Ubuntu, running on the same hardware, will the two operating systems have different read and write speeds? My guess is that there would be minimal difference between operating systems and read and write speeds to the hard disk since the major limited factor is seeking; however, different operating systems may use different file systems in order to attempt to reduce seek time in the hard disk. Likewise, I'm sure that modern operating systems will not actually write directly to the hard disk, and instead will just have it in memory and marked with a dirty bit. Are there any studies that show differences in read and write speeds between OSs? Or would the file system being used by the OS matter more than the OS itself?

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >