Search Results

Search found 3710 results on 149 pages for 'protocol analyzer'.

Page 18/149 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Faster, secure, protocol/code required for long-distance transfer.

    - by Chopper3
    I've ran into a problem and I'm looking for a new secure protocol/client/server that's faster over a 1Gb/s fibre link - let me tell you the story... I have a pair of redundant, diversely-routed, 1Gb/s links over a distance of around 250 miles or so (not dark fibre but a dedicated point to point link, not a mesh). At the 'client' end I have a HP DL380 G5 (2 x dual-core 2.66Ghz Xeon's, 4GB, Windows 2003EE 32-bit), at the 'server' end I have a HP BL460c G6 (2 x quad-core 2.53Ghz Xeons, 48GB, Oracle Linux 5.3 64-bit). I need to transfer around 500 x 2GB files per week from the client to the server machines per week - but the transfer NEEDS to be secure. Using both iPerf or regular FTP I can get ~80MB/s of transfer pretty consistently, which is great. Using WinSCP or Windows SFTP I can't seem to get more that ~3-4MB/s, at this point the server's CPU is 3% busy while CPU0 of the client goes to ~30% utilised. We've tried editing various TCP window sizes with little success. Both ends are connected to quite low-usage Cisco Cat6509's with Sup720's. I can replace the client machine with a newer machine and/or move it to Linux - but this will take time. Clearly these single-threaded secure Windows clients are introducing too much latency doing their encryption. So a few questions/thoughts; Are there any higher performing secure protocols or client software for Windows that I could try? I'm pretty protocol-gnostic so long as it'll work between Windows and Linux. Should I be using hardware to do the encryption, either in the client or the network parts? If so what would you recommend? I'm not convinced that just swapping the server would be that much faster, the CPU was only at 30% but then again that's higher than I'd have expected given the load - moving to Linux at the client end may be a better idea but would be quite disruptive. Am I missing a trick? Thanks in advance.

    Read the article

  • SSL authentication error: RemoteCertificateChainErrors on ASP.NET on Ubuntu

    - by Frank Krueger
    I am trying to access Gmail's SMTP service from an ASP.NET MVC site running under Mono 2.4.2.3. But I keep getting this error: System.InvalidOperationException: SSL authentication error: RemoteCertificateChainErrors at System.Net.Mail.SmtpClient.m__3 (System.Object sender, System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Security.Cryptography.X509Certificates.X509Chain chain, SslPolicyErrors sslPolicyErrors) [0x00000] at System.Net.Security.SslStream+c__AnonStorey9.m__9 (System.Security.Cryptography.X509Certificates.X509Certificate cert, System.Int32[] certErrors) [0x00000] at Mono.Security.Protocol.Tls.SslClientStream.OnRemoteCertificateValidation (System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Int32[] errors) [0x00000] at Mono.Security.Protocol.Tls.SslStreamBase.RaiseRemoteCertificateValidation (System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Int32[] errors) [0x00000] at Mono.Security.Protocol.Tls.SslClientStream.RaiseServerCertificateValidation (System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Int32[] certificateErrors) [0x00000] at Mono.Security.Protocol.Tls.Handshake.Client.TlsServerCertificate.validateCertificates (Mono.Security.X509.X509CertificateCollection certificates) [0x00000] at Mono.Security.Protocol.Tls.Handshake.Client.TlsServerCertificate.ProcessAsTls1 () [0x00000] at Mono.Security.Protocol.Tls.Handshake.HandshakeMessage.Process () [0x00000] at (wrapper remoting-invoke-with-check) Mono.Security.Protocol.Tls.Handshake.HandshakeMessage:Process () at Mono.Security.Protocol.Tls.ClientRecordProtocol.ProcessHandshakeMessage (Mono.Security.Protocol.Tls.TlsStream handMsg) [0x00000] at Mono.Security.Protocol.Tls.RecordProtocol.InternalReceiveRecordCallback (IAsyncResult asyncResult) [0x00000] I have installed certificates using: certmgr -ssl -m smtps://smtp.gmail.com:465 with this output: Mono Certificate Manager - version 2.4.2.3 Manage X.509 certificates and CRL from stores. Copyright 2002, 2003 Motus Technologies. Copyright 2004-2008 Novell. BSD licensed. X.509 Certificate v3 Issued from: C=US, O=Equifax, OU=Equifax Secure Certificate Authority Issued to: C=US, O=Google Inc, CN=Google Internet Authority Valid from: 06/08/2009 20:43:27 Valid until: 06/07/2013 19:43:27 *** WARNING: Certificate signature is INVALID *** Import this certificate into the CA store ?yes X.509 Certificate v3 Issued from: C=US, O=Google Inc, CN=Google Internet Authority Issued to: C=US, S=California, L=Mountain View, O=Google Inc, CN=smtp.gmail.com Valid from: 04/22/2010 20:02:45 Valid until: 04/22/2011 20:12:45 Import this certificate into the AddressBook store ?yes 2 certificates added to the stores. In fact, this worked for a month but mysteriously stopped working on May 5. I installed these new certs today, but I am still getting these errors.

    Read the article

  • Use Glassfish JMS from remote client

    - by James
    Hi, I have glassfish installed on a server with a JMS ConnectionFactory set up jms/MyConnectionFactory with a resource type or javax.jms.ConnectionFactory. I now want to access this from a client application on my local machine for this I have the following: public static void main(String[] args) { try{ Properties env = new Properties(); env.setProperty("java.naming.factory.initial", "com.sun.enterprise.naming.SerialInitContextFactory"); env.setProperty("java.naming.factory.url.pkgs", "com.sun.enterprise.naming"); env.setProperty("java.naming.factory.state", "com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl"); env.setProperty("org.omg.CORBA.ORBInitialHost", "10.97.3.74"); env.setProperty("org.omg.CORBA.ORBInitialPort", "3700"); InitialContext initialContext = new InitialContext(env); ConnectionFactory connectionFactory = null; try { connectionFactory = (ConnectionFactory) initialContext.lookup("jms/MyConnectionFactory"); } catch (Exception e) { System.out.println("JNDI API lookup failed: " + e.toString()); e.printStackTrace(); System.exit(1); } }catch(Exception e){ e.printStackTrace(System.err); } } When I run my client I get the following output: INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate {org.omg.CORBA.ORBInitialPort=3700, java.naming.factory.initial=com.sun.enterprise.naming.SerialInitContextFactory, org.omg.CORBA.ORBInitialHost=10.97.3.74, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl, java.naming.factory.url.pkgs=com.sun.enterprise.naming} 19-Mar-2010 16:09:13 org.hibernate.validator.util.Version <clinit> INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 19-Mar-2010 16:09:13 org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. 19-Mar-2010 16:09:13 com.sun.messaging.jms.ra.ResourceAdapter start INFO: MQJMSRA_RA1101: SJSMQ JMS Resource Adapter starting: REMOTE 19-Mar-2010 16:09:13 com.sun.messaging.jms.ra.ResourceAdapter start INFO: MQJMSRA_RA1101: SJSMQ JMSRA Started:REMOTE 19-Mar-2010 16:09:13 com.sun.enterprise.naming.impl.SerialContext lookup SEVERE: enterprise_naming.serialctx_communication_exception 19-Mar-2010 16:09:13 com.sun.enterprise.naming.impl.SerialContext lookup SEVERE: java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:159) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) at javax.naming.InitialContext.lookup(InitialContext.java:392) at simpleproducerclient.Main.main(Main.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.glassfish.appclient.client.acc.AppClientContainer.launch(AppClientContainer.java:424) at org.glassfish.appclient.client.AppClientFacade.main(AppClientFacade.java:134) Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:1017) at com.sun.enterprise.connectors.ConnectorRuntime.obtainManagedConnectionFactory(ConnectorRuntime.java:375) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:124) ... 11 more Caused by: javax.naming.NamingException: Lookup failed for '__SYSTEM/pools/jms/MyConnectionFactory' in SerialContext targetHost=localhost,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is javax.naming.NameNotFoundException: pools] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at javax.naming.InitialContext.lookup(InitialContext.java:392) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.getConnectorConnectionPool(ConnectorConnectionPoolAdminServiceImpl.java:804) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:932) ... 13 more Caused by: javax.naming.NameNotFoundException: pools at com.sun.enterprise.naming.impl.TransientContext.resolveContext(TransientContext.java:252) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:171) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:172) at com.sun.enterprise.naming.impl.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:58) at com.sun.enterprise.naming.impl.RemoteSerialContextProviderImpl.lookup(RemoteSerialContextProviderImpl.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie.dispatchToMethod(ReflectiveTie.java:146) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:176) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:682) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:216) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1841) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1695) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1078) at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:221) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:797) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:561) JNDI API lookup failed: javax.naming.CommunicationException: Communication exception for SerialContext targetHost=10.97.3.74,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory] at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2558) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:492) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:528) javax.naming.CommunicationException: Communication exception for SerialContext targetHost=10.97.3.74,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:461) at javax.naming.InitialContext.lookup(InitialContext.java:392) at simpleproducerclient.Main.main(Main.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.glassfish.appclient.client.acc.AppClientContainer.launch(AppClientContainer.java:424) at org.glassfish.appclient.client.AppClientFacade.main(AppClientFacade.java:134) Caused by: java.lang.RuntimeException: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:159) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) ... 8 more Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: This pool is not bound in JNDI : jms/MyConnectionFactory at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:1017) at com.sun.enterprise.connectors.ConnectorRuntime.obtainManagedConnectionFactory(ConnectorRuntime.java:375) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:124) ... 11 more Caused by: javax.naming.NamingException: Lookup failed for '__SYSTEM/pools/jms/MyConnectionFactory' in SerialContext targetHost=localhost,targetPort=3700,orb'sInitialHost=ithfdv01,orb'sInitialPort=3700 [Root exception is javax.naming.NameNotFoundException: pools] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at javax.naming.InitialContext.lookup(InitialContext.java:392) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.getConnectorConnectionPool(ConnectorConnectionPoolAdminServiceImpl.java:804) at com.sun.enterprise.connectors.service.ConnectorConnectionPoolAdminServiceImpl.obtainManagedConnectionFactory(ConnectorConnectionPoolAdminServiceImpl.java:932) ... 13 more Caused by: javax.naming.NameNotFoundException: pools at com.sun.enterprise.naming.impl.TransientContext.resolveContext(TransientContext.java:252) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:171) at com.sun.enterprise.naming.impl.TransientContext.lookup(TransientContext.java:172) at com.sun.enterprise.naming.impl.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:58) at com.sun.enterprise.naming.impl.RemoteSerialContextProviderImpl.lookup(RemoteSerialContextProviderImpl.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie.dispatchToMethod(ReflectiveTie.java:146) at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:176) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:682) at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:216) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1841) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1695) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1078) at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:221) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:797) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:561) at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2558) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:492) at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:528) I have looked at a number of posts and have tried a number of things with no success. I can run the following commands on my server: ./asadmin list-jndi-entries UserTransaction: com.sun.enterprise.transaction.TransactionNamingProxy$UserTransactionProxy java:global: com.sun.enterprise.naming.impl.TransientContext jdbc: com.sun.enterprise.naming.impl.TransientContext ejb: com.sun.enterprise.naming.impl.TransientContext com.sun.enterprise.container.common.spi.util.InjectionManager: com.sun.enterprise.container.common.impl.util.InjectionManagerImpl jms: com.sun.enterprise.naming.impl.TransientContext Command list-jndi-entries executed successfully. ./asadmin list-jndi-entries --context jms MyTopic: org.glassfish.javaee.services.ResourceProxy MyConnectionFactory: org.glassfish.javaee.services.ResourceProxy MyQueue: org.glassfish.javaee.services.ResourceProxy Command list-jndi-entries executed successfully. Any help is greatly appreciated. Cheers, James

    Read the article

  • Google Federated Login vs Hybrid Protocol vs Google Data Authentication. Whats's the Difference?

    - by johnfelix
    Hi, I am trying to implement Google Authentication in my website, in which I would also be pulling some Google Data using the Google Data API and I am using Google App Engine with Jinja2. My question is, so many ways are mentioned to do it. I am confused between Google Federated Login,Google Data Protocol, Hybrid Protocol. Are these things the same or different ways to do the same thing. From what I read and understood, which might be incorrect, Google Federated Login uses the hybrid protocol to authenticate and fetch the google data. Is there a proper guide to implement any one of these in python. Examples which I found at the google link are kind of different. From what I understood,correct me if i am wrong, I have to implement only the OpenID Consumer part. In order to implement Google Federated Login in Python, I saw that we need to download a separate library from the openid-enabled.com but I found a different library for the google data implementation at http://code.google.com/p/gdata-python-client/ As you can see, I am confused a lot :D. Please help me :) Thanks

    Read the article

  • How to use RDP protocol in Remote Desktop Viewer?

    - by drgrog
    I am using a Natty Live-USB, and the Remote Desktop Viewer application (Applications - Internet - Remote Desktop Viewer) only shows SSH & VNC protocols. How can I include RDP in the list, in order to connect to existing Windows Remote Desktop sessions on Windows XP machines. I am aware that I can use the gnome-rdp application, or even rdesktop hostname from a terminal, but I would like to create a persistent LiveUSB that uses Remote Desktop Viewer to connect to Windows RDP (port 3389). I do not want to set up VNC, TeamViewer or any others, as these do not solve my problem due to the fact they need additional software on the remote hosts.

    Read the article

  • Is the TCP protocol good enough for real-time multiplayer games?

    - by kevin42
    Back in the day, TCP connections over dialup/ISDN/slow broadband resulted in choppy, laggy games because a single dropped packet resulted in a resync. That meant a lot of game developers had to implement their own reliability layer on top of UDP, or they used UDP for messages that could be dropped or received out of order, and used a parallel TCP connection for information that must be reliable. Given the average user has faster network connections now, can a real time game such as an FPS give good performance over a TCP connection?

    Read the article

  • Make public webcam. Which protocol, which codec. (Using VLC)

    - by gsedej
    Hi! I want to use my old (1GHz) PC as webcam video stream server (like you can see those road cameras). I thought of using VLC and already tried using http output but it was not really good. Too cpu hungry, too big stream (kBps), not stable... I been reading VLC how-to's but thre is still a question. Which output should I use? Http, RTSP, UDP? I want to make for more than one computer at the same time (multicast). Which codec should be good? PC is not so fast so it shouldn't be too cpu hungry codec. Mpeg2, mpeg4, xvid? how much video buffer should I use (vb=?)? What about setting IP and ports? So I need some help with ideas, but if someone can make a VLC command line it's even better :) Oh, computer has direct internet connection and own IP.

    Read the article

  • AFP, SMB, NFS which is the best data transfer protocol ?

    - by Kami
    I have a computer with large hard disks running Gentoo. I have to serve med/big files via a wired network to Apple devices (all of them running OS X). Which protocol is the best for the following needs ? : Speed Ease of use (by the clients and the server) Less limited (max file size, limited charset for filenames) Security

    Read the article

  • How to make a JBoss service to handle Protocol Buffers directly?

    - by mlaverd
    Hello everyone, I'm interested in building a JBoss service. Because I'm reusing some existing code, the service must be able to talk SSL/TLS and Protocol Buffers. The documentation I see on the JBoss wiki makes it look like services have their transport and data interpretation handled by JBoss itself. Is it really the case? How could I implement this requirement?

    Read the article

  • How to connect Active Directory (AD - W2K3) to Lightweight Directory Access Protocol (LDAP - Fedora + Dogtag)?

    - by JackKnows
    Hey my goal is to connect a Active Directory (AD) to Lightweight Directory Access Protocol (LDAP) using Fedora + Dogtag after that using OS´s like Windows XP or 7 and Linuxs like Ubuntu they can access that connections and take part of some functionalities like "Roaming Profiles", "Printers", "Auth" and other stuff. If anyone can help i appreciate because i am new to this and this very important.

    Read the article

  • Lucene Analyzer to Use With Special Characters and Punctuation?

    - by Brandon
    I have a Lucene index that has several documents in it. Each document has multiple fields such as: Id Project Name Description The Id field will be a unique identifier such as a GUID, Project is a user's ProjectID and a user can only view documents for their project, and Name and Description contain text that can have special characters. When a user performs a search on the Name field, I want to be able to attempt to match the best I can such as: First Will return both: First.Last and First.Middle.Last Name can also be something like: Test (NameTest) Where, if a user types in 'Test', 'Name', or '(NameTest)', then they can find the result. However, if I say that Project is 'ProjectA' then that needs to be an exact match (case insensitive search). The same goes with the Id field. Which fields should I set up as Tokenized and which as Untokenized? Also, is there a good Analyzer I should consider to make this happen? I am stuck trying to decide the best route to implement the desired searching.

    Read the article

  • Is there a way to customise messages produced by statements in MS SQL Query Analyzer?

    - by Scott Leis
    If I run a simple query in SQL Query Analyzer, like: SELECT * FROM TableName the Messages pane always produces a message like: (30 row(s) affected) If I run a stored procedure with many statements, the messages are useless because there's no indication of what each one relates to. So firstly: Is there a way to customise the default messages on a per-query basis? E.g. I'd like a specific query to produce a message like: TableName query produced [numRowsAffected] results. replacing [numRowsAffected] with the number that would have appeared in the default message. Secondly, is there a way to suppress the default messages on a per-query basis? E.g. I have a local variable of type TABLE, used in several statements. I don't want any message to appear for statements where I'm just deleting data from that variable before re-using it. I'm seeking solutions that work in SQL Server 8.0.

    Read the article

  • Executing sequential stored procedures; works in query analyzer, doesn't in my .NET application

    - by evanmortland
    Hello, I have an audit record table that I am writing to. I am connecting to MyDb, which has a stored procedure called 'CreateAudit', which is a passthrough stored procedure to another database on the same machine called MyOther DB with a stored procedure called 'CreatedAudit' as well. In other words in MyDB I have CreateAudit, which does the following EXEC dbo.MyOtherDB.CreateAudit. I call the MyDb CreateAudit stored procedure from my application, using subsonic as the DAL. The first time I call it, I call it with the following (pseudocode): Result = CreateAudit(recordId, "Opened") One line after that, I call: Result2 = CreateAudit(recordId, "Closed") In my second stored procedure it is supposed to mark the record that was created by the CreateAudit(recordId, "Opened") with a status of closed. It works great if I run them independently of one another, but when they run in sequence in the application, the record is not marked as "Closed". When I run SQL profiler I see that both queries ran, and if I copy the queries out and run them from query analyzer the record gets marked as closed 100% of the time! When I run it from the application, about once every 20 times or so, the record is successfully marked closed - the other 19 times nothing happens, but I do not get an error! Is it possible for the .NET app to skip over the ouput from the first stored procedure and start executing the second stored procedure before the record in the first is created? When I add a "WAITFOR DELAY '00:00:00:003'" to the top of my stored procedure, the record is also closed 100% of the time. My head is spinning, any ideas why this is happening! Thanks for any responses, very interested in hearing how this can happen.

    Read the article

  • how to demonstrate that a protocol is certain with those specifications.

    - by kawtousse
    Hi every one, we have 4 persons A, B, C and D witch want to know the averge of their salary SA SB SC SD but no one wants that the others know his salary. For that they use this protocol: A-B: [N+SA ]KB B-C:[N+SA+SB]KC C-D:[N+SA+SB+SC]KD D-A:[N+SA+SB+SC+SD]KA where the notation [m]KY represents the message x crypted xith the public key of y Is this protocol certain. can we trust it. want you please give me justification. thanks for help.

    Read the article

  • how to demonstrate thet a protocol is certain with those specifications.

    - by kawtousse
    Hi every one, we have 4 persons A, B, C and D witch want to know the averge of their salary SA SB SC SD but no one wants that the others know his salary. For that they use this protocol: 1.A-B: [N+SA ]KB 2.B-C:[N+SA+SB]KC 3.C-D:[N+SA+SB+SC]KD 4.D-A:[N+SA+SB+SC+SD]KA where the notation [m]KY represents the message x crypted xith the public key of y Is this protocol certain. can we trust it. want you please give me justification. thanks for help.

    Read the article

  • Is XML-RPC bad used as a protocol for a public API implementation?

    - by Jack Duluoz
    I need to implement a web API for a project I'm working on in this period. I read there are many standard protocols to do it: XML-RPC, SOAP, REST. Apparently, the XML-RPC one is the easiest one to implement and use from what I saw, but I didn't find anything about using it to implement an API. Instead I found many tutorial about creating a REST API in PHP, for example. Is there any counter-indication for using XML-RPC to implement a public web API? Also, more generally speaking, I could (sort of) define a custom protocol for my API, to keep things simpler (i.e. accepting only GET request containing the parameters I need): would this be so bad? Is using a standard protocol a must-do?

    Read the article

  • How do I stop Outlook from stealing mailto protocol from Gmail?

    - by AngryHacker
    In Chrome, when I click on a mailto: link, I'd like to be taken to my Gmail's Compose window. So I downloaded ChromeMailer and it works relatively well. However, after using Outlook 2010, the default for the mailto reverts to Outlook. I went into Outlook's Options, clicked Default Programs... and was greeted with this: As you can see, the checkbox is grayed out and I can't do anything to changed it. Clicking Select All checkbox does nothing either. How do I stop Outlook from stealing the mailto protocol handler?

    Read the article

  • windows 2003 download utility from command line , http or ftp or any other protocol , from one comma

    - by Michael
    Hello , I need to know if there is anyway utility bult-in windows 2003 that I can use from the command line to download a file using only one command. Basically I know that I can download from ftp using the "ftp" utility but in order to do that I need to do first "ftp open" and then pass the other commands so it doesn't help me because I need to do perform the download only from one command. The download may be performed through http, ftp or any other protocol. OS Name: Microsoft(R) Windows(R) Server 2003 Enterprise x64 Editio OS Version: 5.2.3790 Service Pack 2 Build 379 Thank you in advance for any answer !

    Read the article

  • How to know which protocol is used in data transfer and inspect that data?

    - by user37880
    I've a .net application for windows. This application transfers a lot of data to and from a particular server on a fix port no 8888. I tried 'Tcpview' but couldn't figure out anything useful. I only figured that it uses 'tcp' connection. Is there a way to know which protocol is used for data transfer (I think port no 8888 is not specific port so not helpful)? How exactly my machine makes connection to this server? Is it telnet/http etc or what? How can I inspect the actual data which is being transferred? If data is encrypted, is it possible to know encryption method on client side (without reverse engineering)? Thanks.

    Read the article

  • My sound stopped working today, how can I fix it?

    - by Oli
    This seems to be a problem with pulseaudio. I was logged in over VNC on my phone and started playing a video this caused X to crash (as sometimes happens). I restarted and suddenly the sound doesn't work. I have a Intel HDA/Realtek ALC889 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller alsamixer is detecting this just fine. PulseAudio doesn't detect this alsa device so is using auto_null as the default sink (logs below). When I properly kill PulseAudio (tell it not to auto-start) direct ALSA communication with the sound card works just fine. speaker-test, for example, works. So the hardware and ALSA layers are fine IMO. In the logs, it seems that the card might be "busy" but I really don't know how or why it would be now (and never before). Is there an ALSA lock file somewhere that it still there because of my crash? I just ran sudo fuser /dev/snd/* and saw this: oli@bert:~$ sudo fuser /dev/snd/* /dev/snd/controlC0: 1884 /dev/snd/pcmC0D0c: 1884m /dev/snd/timer: 1884 A look at the process list (ps aux | grep 1884) tells me process 1884 is arecord -c 1 -f S16_LE -r 8000 -t raw. No idea what this is or why it's running. When I try and kill arecord (as root), it just respawns and rebinds on the hardware. I'm in a very annoying situation where I don't know what is going on and don't know how to find out. I'm open to all suggestions to get this working again. Fire away. And here's what I get when I stop PA auto-loading, kill it and then start it with -vvvv. oli@bert:~$ pulseaudio -vvvvv I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted D: core-rtclock.c: Timer slack is set to 50 us. D: core-util.c: RealtimeKit worked. I: core-util.c: Successfully gained nice level -11. I: main.c: This is PulseAudio 0.9.21-63-gd3efa-dirty D: main.c: Compilation host: x86_64-pc-linux-gnu D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O3 -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option D: main.c: Running on host: Linux x86_64 2.6.38-rc3 #1 SMP Tue Feb 1 10:53:04 GMT 2011 D: main.c: Found 8 CPUs. I: main.c: Page size is 4096 bytes D: main.c: Compiled with Valgrind support: no D: main.c: Running in valgrind mode: no D: main.c: Running in VM: no D: main.c: Optimised build: yes D: main.c: All asserts enabled. I: main.c: Machine ID is 8310740c4729ef474fe5ecec4bbf5a6b. I: main.c: Session ID is 8310740c4729ef474fe5ecec4bbf5a6b-1297338553.571075-1050119523. I: main.c: Using runtime directory /home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-runtime. I: main.c: Using state directory /home/oli/.pulse. I: main.c: Using modules directory /usr/lib/pulse-0.9.21/modules. I: main.c: Running in system mode: no I: main.c: Fresh high-resolution timers available! Enjoy ol' chap! I: cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 I: svolume_mmx.c: Initialising MMX optimized functions. I: remap_mmx.c: Initialising MMX optimized remappers. I: svolume_sse.c: Initialising SSE2 optimized functions. I: remap_sse.c: Initialising SSE2 optimized remappers. I: sconv_sse.c: Initialising SSE2 optimized conversions. D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472 D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes.tdb' I: module-device-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes'. I: module.c: Loaded "module-device-restore" (index: #0; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes.tdb' I: module-stream-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes'. I: module.c: Loaded "module-stream-restore" (index: #1; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database.tdb' I: module-card-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database'. I: module.c: Loaded "module-card-restore" (index: #2; argument: ""). I: module.c: Loaded "module-augment-properties" (index: #3; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards. I: module.c: Loaded "module-udev-detect" (index: #4; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': success D: dbus-util.c: Successfully connected to D-Bus system bus ba7c9a1f90b3d49d930bca2100000015 as :1.62 D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired D: bluetooth-util.c: Bluetooth daemon is apparently not available. I: module.c: Loaded "module-bluetooth-discover" (index: #5; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-gconf.so': success I: module.c: Loaded "module-gconf" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'auto_null' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'auto_null.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). D: module-always-sink.c: Autoloading null-sink as no other sinks detected. I: sink.c: Created sink 0 "auto_null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: sink.c: device.description = "Dummy Output" I: sink.c: device.class = "abstract" I: sink.c: device.icon_name = "audio-card" D: core-subscribe.c: Dropped redundant event due to change event. I: source.c: Created source 0 "auto_null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: source.c: device.description = "Monitor of Dummy Output" I: source.c: device.class = "monitor" I: source.c: device.icon_name = "audio-input-microphone" D: module-null-sink.c: Thread starting up I: module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'"). I: module.c: Loaded "module-always-sink" (index: #12; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #13; argument: ""). D: module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds. I: module.c: Loaded "module-suspend-on-idle" (index: #14; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1" D: module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1 I: module.c: Loaded "module-console-kit" (index: #15; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #16; argument: ""). D: dbus-util.c: Successfully connected to D-Bus session bus efbffc6788fad56cfd64d40c00000018 as :1.182 D: main.c: Got org.pulseaudio.Server! I: main.c: Daemon startup complete. I: client.c: Created 1 "Native client (UNIX socket client)" I: client.c: Created 2 "Native client (UNIX socket client)" D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: module-augment-properties.c: Looking for .desktop file for gnome-volume-control-applet D: module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon D: core-subscribe.c: Dropped redundant event due to change event. I: module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ... D: sink.c: Suspend cause of sink auto_null is 0x0004, suspending Note the one section that seems to find the hardware but says it's busy (no idea if this is relevant). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >