Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 181/314 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• Why does pinging 192.168.072 (only 2 dots) return a response from 192.168.0.58?

  - by George Duckett

  I mistakenly missed the dot off of an IP address and typed in 192.168.072. To my surprise I connected to a machine at 192.168.0.58 If I ping 192.168.072 I get responses from 192.168.0.58. Why is this? I'm on a Windows PC on a Windows domain. If I ping 192.168.72 I get a response from 192.168.0.72, so it seems the 0 in 072 (in my original mistake) is significant. This question was a Super User Question of the Week. Read the blog entry for more details or contribute to the blog yourself

  Read the article

• External drives show up in Nautilus/Computer even when they are unplugged.

  - by Testament

  I have two 1TB Seagate USB (sdc1 and sdd1) drives connected to an old PC running Fedora 11 without an X server running. Since sdc1 and sdd1 change depending on the order in which they are plugged in, I decided to mount them using their UUID instead. These are my fstab entries UUID=d1b28578-451b-4f03-af28-2e8a6d5b7efb /media/Seagate ext3 defaults,rw,auto,users UUID=36bf5df4-934e-42d4-9e25-16a13971509c /media/Projects ext3 defaults,rw,auto,users They work fine, but when I unmount them and unplug the USB drives, they still show up in Nautilus (I'm running nautilus with X11 forwarding to an Ubuntu machine, btw). Now if I remove those entries from fstab, the drives disappear from Computer. If I add the entries back, they show up as an unmounted drive even when the drive is not plugged in. How do I do this so they don't show up when they're not plugged in?

  Read the article

• Any reasonable UPS for a Desktop PC, just to shut it down?

  - by Michael Stum

  While I do have a surge protector to protect against overvoltage (hopefully), I have nothing against undervoltage. When a lightning storm hits, I had the lights flickering at some point. The PC continued to run, but it got me thinking of getting a UPS as a way to a) have a clean 120V/60Hz power source and b) have a way to shut down the PC in case something bad happens. I heard not all UPS' protect against power spikes, so I wonder if someone has a recommendation? It does not need to keep the PC on for a long time if the power goes out, it's good enough if it shuts down the PC after 5 minutes or so. There are 2 PCs connected. One is a Core i7-860 with a Radeon 5870 running Windows 7 Ultimate (so quite power hungry. It uses a 600W PSU but I have no measurements of the actual usage), the other one is a Windoes Home Server, running WHS/Windows Server 2003. Any recommendations in the low-price segment?

  Read the article

• Iptables port mapping from two PCs to one

  - by Anton

  We have 3 PCs, two of it are connected to internet (both of it have 2 NIC) PC1: eth0 - 1.0.0.1 (external IP) eth1 - 172.16.0.1 (internal IP) PC2: eth0 - 1.0.0.2 (external IP) eth1 - 172.16.0.2 (internal IP) PC3: eth0 - 172.16.0.3 (internal IP) Now we want to map port 80 from PC1 and PC2 to PC3. But there is the problem: iptables port forwarding works well from PC1 or PC2, but only in case if PC3 have PC1 or PC2 as gateway. So, question is: can we have port mapping from both PC1 and PC2 regardless of gateway settings on PC3? Thank you in advance.

  Read the article

• Windows Internet Connection Issue (HELP)

  - by semajjames1399

  I have a windows 8 hp dual booting ubuntu. When i log onto windows i cant get on the internet... But skype and other applications can just now webpages in a browser what so ever (this is on windows 8). But on ubuntu i have no internet issues at all. From what i see right now its only the browsers in windows 8 that cant get the internet, and ive tried all the browsers i had (chrome, ie, firefox) and they cant connect but in the win8 notification area it says im connected. I can even ping via cmd. HELP! Thanks. Whats not working is that i cant get access the internet through the windows 8 broswer.

  Read the article

• External drives show up in Nautilus/Computer even when they are unplugged.

  - by Testament

  I have two 1TB Seagate USB (sdc1 and sdd1) drives connected to an old PC without an X server running. Since sdc1 and sdd1 change depending on the order in which they are plugged in, I decided to mount them using their UUID instead. These are my fstab entries UUID=d1b28578-451b-4f03-af28-2e8a6d5b7efb /media/Seagate ext3 defaults,rw,auto,users UUID=36bf5df4-934e-42d4-9e25-16a13971509c /media/Projects ext3 defaults,rw,auto,users They work fine, but when I unmount them and unplug the USB drives, they still show up in Nautilus (I'm running nautilus with X11 forwarding onto another Ubuntu machine, btw). Now if I remove those entries from fstab, the drives disappear from Computer. If I add the entries back, they show up as an unmounted drive even when the drive is not plugged in. How do I do this so they don't show up when they're not plugged in?

  Read the article

• Linux clients for Exchange (email and) calendar

  - by jplindstrom

  At $work, the official email solution is Outlook on Windows, connected to an Exchange server. That's problematic for people with Linux on their desktop machine. The Exchange server supports IMAP, and e-mail works fairly well using the usual suspects, e.g. Thunderbird. It also provides the web mail interface, which is fairly crap unless you use IE. (Any other favorite e-mail clients?) The biggest problem is the Outlook Calendar. I still have found no viable Linux client that can replace it. Any recommendations?

  Read the article

• What options exist when the vendor does not supply an ADB driver for an Android device?

  - by STATUS_ACCESS_DENIED

  So I bought an Android phone and the vendor does not offer any drivers whatsoever. The Android SDK and the drivers that come with it don't seem to work with the device, but the device itself reports as Android 2.2.1. Other users have reported that the drivers of the Nook Color worked for them, but I cannot confirm this, after trying. What options do I have to connect to the device (and ultimately to root it)? Is it truly just the .inf file that I need to manipulate in order to make the device ID known to Windows? After all there are tools to figure out those strings while the device is connected (although "unknown") ...

  Read the article

• What is a Dynamic way to Connect to a Virtual Machine's Webserver from its Host Machine? [closed]

  - by Jonnybojangles

  As a Web-Developer what is the most efficient (automated) way to connect to a Virtual Machine (VM) running a development webserver from it’s Host Machine (the machine running the VM) when you do not have control over the networks (home, Startbucks, work, etc) you are connected to? Currently I start my VM (a VirtualBox VM running CentOS), run ifconfig to determine the VM’s current IP. I then take that IP and map it my Host machine’s host file so that I can access the VM’s webserver from the Host. I feel that this is not an efficient way to connect to my VM’s webserver because each time I connect to a new network (a few times a day) I need to repeat the IP look up and host file update, and sometimes restart the VM's network service.

  Read the article

• Firewall is blocking internet traffic to OpenVPN clients

  - by user268905

  I have a virtual network setup with a Linux router/firewall connected to two private networks. An OpenVPN server in routing mode and a web server are in one of the networks. On the other are linux client machines which access the webserver and the Internet through the OpenVPN server. Also, external clients can access the OpenVPN from the Internet. The OpenVPN's server.conf is setup to use routing mode in udp, push DNS and routes to the network it is in so clients can access the webserver. Here are my very strict firewall rules. After connecting to the OpenVPN server, my clients can not access the Internet or the web server. When I allow FORWARD traffic to go through, it works just fine. The OpenVPN server has full internet connectivity. What firewall rule do I need to add to allow internet traffic to reach my clients?

  Read the article

• Device that connects to a switch via RJ45, that emulates a PC

  - by Mike Christiansen

  One of my co-workers once saw a device that plugged into a RJ45 jack, that emulated a PC. It could be configured with an IP address, and respond to pings. I was wondering if anyone knew about these, or even what they are called? This will be used to simulate a PC in a classroom environment. Thanks in advance. Edit: This is a CCNA classroom, we are looking to simulate a PC connected to an ethernet port on a router. These will be on different subnets, etc. This might be doable with a VM through VLANs and virtual switches, but then we are getting away from configuring the physical ports on the router the way we want to.

  Read the article

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• Run a service after networking is ready on Ubuntu?

  - by TK Kocheran

  I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

  Read the article

• Disable writing RAID degraded mode

  - by jolivier

  I have a RAID5 with 5 disks on my machine and suspect the motherboard chipset to fail at some points and make my raid going in degraded mode. Last time it happened I noticed it on the failure of the 2nd drive connected to the same chipset and lost a lot of data. So I would like to prevent this, and especially I would like to have mdadm disable writes on the raid if one of the disk fails. So that in between I get notified, I recover and can use my system again. Sadly I could not find it in man mdadm so I was wondering if this is possible via a tool or hidden option since for me it looks like a standard feature of a RAID system. If this is not possible I would also be happy with a solution to stop the raid if degraded.

  Read the article

• How can I change the default keyboard layout in Ubuntu 10.10?

  - by startoftext

  Ubuntu keeps detecting my keyboard layout as Romanian. It almost always does this on a reboot and some times on waking from sleep. Some times it just randomly changes back to Romanian while the computer is on. I always set it back to "USA" in the keyboard preferences and delete the Romanian layout. What files configure this in Ubuntu? I looked in xorg.conf and did not find any keyboard settings. How can I set this to USA permanently? I have a laptop with a typical US layout built in keyboard and I also have an apple keyboard that is also US layout connected via USB. I have run other distributions on this same setup before and never had this happen.

  Read the article

• is using Hosts for resolving a sql-server more performant?

  - by Ice

  Hi, we have a legacy application which uses a access.mdb with hundreds of ODBC-connected tables on a sql-server. the access.mdb contains nothing else than these odbc-connections. Now we consider to use a virtual sql-servername for these odbc connections and resolve it in the local hosts-file with the ip-address of the real sql-server. Like this we can easy switch between a test-sql-database server and the the server for production in changing one single entry in the hosts. EVERYTHING works fine and now comes the question: Could it be that this is more performant because there is one single point on resolving the sql-server (name or ip-address)? Is there something like a network-cache / DNS-Cache? peace Ice

  Read the article

• Opening notebooks

  - by Plastkort

  I have a Compaq CQ40 which has a defective CPU fan, it seems unable to cool the notebook enough at this time, it is constantly running, and if you move the pc up/down to look under it, it makes some sort of chainsaw sound. I have tried to take out all the screws underneath, but I still have a problem with the plastic cover on the above; I am afraid I might break it since it seem to be connected with plastic clips underneath. I have fixed notebooks before, but this one seem new, how can I open the plastic cover above without breaking it? Any advice, tips and tricks would be so nice to have, not only for this notebook, but any future notebook also I might need to repair. It would be nice if anyone here knows a place with video tutorials on this subject as well.

  Read the article

• What happened to WinFS?

  - by Console

  The most interesting feature that was ever connected to what eventually became Vista was WinFS, a revolutionary (so it seemed, at least back then) new way of storing and accessing information on a computer. This feature was cut despite actually reaching a closed alpha/technical preview release. There was a smoke and mirrors blog post from MS about the technology living on in an upcoming SQL server release, but to me it just felt like it was axed, hard. Does anyone have any idea what happened to it? Is it killed, or just on the backburner? Was it just impossible to implement, too expensive, or did someone think of a better idea? Are there any projects (From MS or anyone else) that have similar goals?

  Read the article

• How can I tell if a host is bridged and acting as a router

  - by makerofthings7

  I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

  Read the article

• two shops network

  - by edward

  okay so, I just opened up two shops in my hometown. The two stores is about 6 blocks apart, connecting them by wire is not really feasible in cost wise. What kind of network topology should I use for my small shops, there will be 5 computers, one is the sales computer ,another 4 as mentioned is the guest computer. I want the sales and guest computers network to be seperated. Both shops have same computers. The guest computers serves up simple website that has my shop catalog on it, I'm thinking of using a web server. So, how am i suppose to setup these networks, im planning to add in more computers in the future. Is it I need to station a single server at a shop, and all the computer connected to it? or is there any more effective methods? I'm no networking expert, would love to hear some advice.

  Read the article

• Wireless adapter won't enable

  - by user52141

  I bought a d-link dwa-125, plugged it in and windows recognized it right away and said everything was good to go. But there were no connection options. When I open up the network control panel and have it show me the adapters... the wireless adapter is greyed out and says it is disabled. So I tell it to enable. It says is it enabling, then says it is enabled... but the adapter stayed greyed out saying disabled. I am running 7 x64. I have reinstalled drivers, connected it via lan and had it update drivers.. same problem. It works just fine on any other computer in the house, just not this one.

  Read the article

• Outlook 2003 won't send mail

  - by RKid

  A colleague's e-mail has just started playing up - he's using Outlook/Office 2003 on a Win XP SP3 machine. Yesterday his mail has suddenly stopped being received, although there are no errors of any kind that i can see. It was only noticed because he didn't have any replys all day. His e-mails seem to send fine - no errors come up, the mail goes into Sent Items as usual, but it never arrives at it's destination. However, when mail is sent from Outlook Web Access, e-mails send fine. All connections to the server appear fine and outlook is 'connected' but I've had a look at the message tracking on our Exchange 2003 server and no messages are appearing when sent from outlook, only when sent through OWA. Where should i be looking ? Thanks.

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >