Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 179/314 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• Cisco: changing VTP mode server/client to transparent

  - by J. Smith

  I have around 40 L2 switches (2960, 3560, 3500, 3750) running in VTP client mode and one L3 switch (6500) running in VTP server mode, all connected together. I would like to switch everything in VTP transparent mode without any interruption of service. I've already test on a poc version with 3 switches (Catalyst 2950, 3560 and 3750). Using serial and SSH connection, it is seems working but i'm not sure it is enough representative compare to the real network. Knowing that the VTP Pruning is enabled, I am wondering what would be the best procedure to proceed the changement. I've read that we could lost connection by keeping it enabled. Should I change the server or clients first? Is it important to change the VTP domain and VTP Pruning parameters?

  Read the article

• What is the "real" difference between a NAS and NFS? Or, why pick a NAS device over "mere" NFS?

  - by warren

  From an end-user perspective, what is the difference between a NAS device and using NFS exports from a file server? They seem to accomplish the same end result. The difference between a SAN and other file storage is related (in my experience) to how they are connected to the server infrastructure. However, the difference between a NAS, connecting over a standard ethernet port, and NFS (sharing storage off specific servers, also over the network), seems more nebulous. Is there a good reason to pick a NAS filer over just running NFS on servers?

  Read the article

• Linux foxboard network monitor

  - by het.oosten

  I want to use a Foxboard a simple network monitor for multiple routers (all routers are connected to the internet). Foxboard is a mini pc with an embedded version of Debian. My idea is to use multiple virtual network devices like this: eth0 192.168.2.10 eth0:1 192.168.3.10 eth0:2 192.168.4.10 I found a nice Python script to ping an external host here (the solution from Ryan Cox): http://stackoverflow.com/questions/316866/ping-a-site-in-python Is it possible to configure Debian to use eth0 when I ping www.site-a.com and eth0:1 when I ping www.site-b.com?

  Read the article

• Best way to "stream" music / video to my HDTV from my pc?

  - by loj

  My requirement is simple: I have a laptop and a desktop at home that I often use for various media (music, videos etc.) and I want to know what the best (quickest, most seamless, best quality etc) solution for sending this media to my HDTV (and connected sound system). An example would be I'm listening to some music from youtube on my laptop in my living room and want to quickly send it to my tv (which has a sound system) so that I don't have to listen to it through my laptop. I mainly use linux (but a windows dependent solution would be ok too if its the best option). I would greatly appreciate any suggestions. Oh and a wireless solution would be best.

  Read the article

• Changing the IP address with a name [closed]

  - by fede

  I have a web server (xampp) in a particular PC running on my LAN, and I added the following line in the 'hosts' file : 127.0.0.1 mysite. Then, in another PC connected to the LAN, I'm trying to acces the previous web server by typing 'http://mysite/index.php' on the web browser, with no luck. But if I type the IP from the server computer (http://192.168.2.87/index.php) I am able to access the web site. So, what should i configure so when i type 'http://mysite/index.php' I get the same result as http:// 192.168.2.87/index.php ?? Thanx!

  Read the article

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

  Read the article

• connecting 2 ubuntu computers as a lan

  - by Brendan Cutjar

  Hi i am trying to connect 2 ubuntu computers as a LAN. In my current setup I have: One machine running ubuntu 11.10 with Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller While the other machine is running Ubuntu 12.04 with an Atheros Communications Inc AR8152 v1.1 Fast Ethernet The two machines are connected via a switch (Edimax ES-3205P). Unfortunately I still cannot connect the two machines together. Can somebody please show me what to do and how to go about solving this issue?

  Read the article

• cPanel configuration appears to allow unauthenticated SMTP - how to fix?

  - by ttsiodras

  One of my clients is using a cPanel-based Virtual Dedicated Server that appears to allow unauthenticated SMTP: bash$ echo EHLO | nc mail.clientscompany.com 25 ... 250-SIZE 52428800 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS 250 HELP It therefore appears that anyone (esp. spammers) can use his mail server to send whatever - I just connected from my DSL connection at home, and... bash$ nc mail.clientscompany.com 25 HELO clientscompany.com MAIL FROM: [email protected] RCPT TO: [email protected] DATA From: <[email protected]> To: <[email protected]> Date: ... Subject: ... Blah . QUIT I just tested this, and sure enough, it sent a mail from "[email protected]". Since I am not familiar with cPanel and WHM, can someone provide pointers to configure his mail server to (a) only accept TLS connections and (b) only authenticated ones (i.e. with user/password, not just plain connections). Thanks for any help.

  Read the article

• Windows 2003 to log on no matter how it turned off

  - by Arya

  I have a windows server 2003, which I use Teamviewer to connect to. When there is a power failure, and the computer restarts, it will not load Teamviewer. It gets stuck on a screen which asks why the computer was turned off. There is no keyboard or mouse connected to the server and I need Teamviewer to open every time. I don't want the screen asking why it was turned off to show up ever. I turned off Shutdown Event Tracker by doing the following: Open gpedit.msc Computer Configuration Administrative Templates System click Display Shutdown Event Tracker and then selected the disable radio button. Is this enough to prevent that screen to show up again? or is there anything else I need to change?

  Read the article

• Fully secured gateway web sites

  - by SeaShore

  Hello, Are there any web sites that serve as gateways for fully encrypted communication? I mean sites with which I can open a secured session, and then to exchange through them with other sites in a secure way both URLs and content? Thanks in advance. UPDATE Sorry for not being clear. I was wondering if there was a way to access any site over the Internet (http or https) without letting any Intranet-proxy read the requested URL or the received content. My question is whether such a site exists, e.g.: I am connected to that site via https, I send it a URL in a secured way, the site gets the content from the target site (possibly in a non-secured way) and returns to me the requested content in a secured way.

  Read the article

• Computer freezes, wireless network icon disappears

  - by Heidi

  As you can see I have two problems. I have a Toshiba Tecra A3 computer. It is 5-6 years old and it is connected to a D-link router. For a period now it has not been working correctly. The computer freezes either when i try turning it on or when I have been using the computer for a short period of time. The times the computer works normally I have a problem with a disappearing wireless network icon, and so I have no internet. Can this be fixed or do I have to buy a new computer? I only use the computer for internet surfing and easy tasks like word etc, so I would like to keep it as long as possible.

  Read the article

• Microsoft Outlook 2007 Limit attachment size

  - by tasmanian_devil

  I have qmail server and authetication on Active Directory. All clients use Microsoft Outlook 2007 as default mail client. A have one central location and several remote location wich are connected with slow link speed connection. I have attachment limit on qmail, but i have problem when client attach file localy and send mail, attachment is been uploaded to qmail server and rejected because exceeded limit. Is it possible to limit attachment localy on MS Outlook 2007? I know that Office 2010 have attachment limitation but i think that is not working on Office 2007.

  Read the article

• Can ping cannot be pinged

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can i solve this?

  Read the article

• Windows Reformatting

  - by Shimz187

  I recently began formatting a hard drive via USB extenal drive when the power went off. When i powered it up again and connected the drive the drives dont show up under my computer. When i go to disk management, i see the drive but now it says unallocated space. The drive was initialy partitioned into 2 drives. I cant see both drives now. Tried running GetDataBack NTFS recovery tool and it only comes up with errors. There seem to be no information on the drive from the data recovery utility. I know the information is there but how do i find it. HELP!!!!

  Read the article

• mapping server 2008 network drive to vista home premium x64

  - by rboorgapally

  We have a windows server 2008 box at my work place. I want to map a drive from the server to my laptop. I use windows vista home premium x64. I am connected to my workplace through VPN. i can map the drive when I use the administrator account on the server. But the log on is unsuccessful if I use my personal account on the server to map the drive. My personal account on the server is part of Administrators group. Can any one help me with this?

  Read the article

• windows print service

  - by user1631171

  Hi my college has a HP color printer that can be used to print both A3 and A4 size color printouts. It is connected to a windows 2008 print server. The windows event viewer provides the status of printouts using event id 307. I would like to know if it is possible to find out if an A3 page was printed or A4 page was printed. Is this information also logged in windows event viewer. Or is there any other event id that captures this information. Also the number of copies printed should be captured in event id 805. I have read in some forums that sometimes the value is wrong. Please provide me some information on this. Thanks in advance.

  Read the article

• Share the DVB card on windows 7 [closed]

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• Disk fragmentation when dealing with many small files

  - by Zorlack

  On a daily basis we generate about 3.4 Million small jpeg files. We also delete about 3.4 Million 90 day old images. To date, we've dealt with this content by storing the images in a hierarchical manner. The heriarchy is something like this: /Year/Month/Day/Source/ This heirarchy allows us to effectively delete days worth of content across all sources. The files are stored on a Windows 2003 server connected to a 14 disk SATA RAID6. We've started having significant performance issues when writing-to and reading-from the disks. This may be due to the performance of the hardware, but I suspect that disk fragmentation bay be a culprit at well. Some people have recommended storing the data in a database, but I've been hesitant to do this. An other thought was to use some sort of container file, like a VHD or something. Does anyone have any advice for mitigating this kind of fragmentation?

  Read the article

• Exchange server listening on port 25 but clients dont recieve emails

  - by Josh R

  My exchange server is listening on port 25, that is I can telnet into it and send an email but Outlook 2010/2007, OWA, and ActiveSync are not pulling down emails. Outlook 2010 specifically says Connected To Exchange Server and Updating Inbox but it never updates the inbox. Also, OWA shows some of the newer mail messages, but when I double click on one to open it up in OWA, it times out. Any idea what could be causing this? Also Exchange Transport and Information Store are started. Thanks!

  Read the article

• Multiple network cards, controlling where my traffic goes

  - by thefinn93

  This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

  Read the article

• Playing games over RDP and utilizing other res of powerfull PC... [closed]

  - by Alex

  Possible Duplicate: Is it possible to run games over remote desktop? Hey guys, I have the one question..that may be not usual but very interesting.. Well, I have laptop and some powerfull PC, now I want to utilize ALL energy of the powerfull PC on my notebook.. for example, run games like F.E.A.R on powefull PC and next play it over the Remote Desktop on my laptop.. both PC may be connected lan < lan, or thru Wi-Fi, or FireWare, or (?) any other way that does not matter.. Google told me that it won't work over RDP due to protocol lacks and there should be many bump on the road on that way.. but, maybe , you guys will give me the right point ? Let's formalzie.. we'd like to utilize all resources of one PC on another PC via network, how we should do that ? Any ideas?

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• mysql server, open 'dead' connections

  - by Jeff

  my basic question is what kind of impact does this have on the server.. lets say for example, there is an older program in my company that opens connections to a mysql database server at a high rate (everything they do with the application basically opens a server connections) however, this application was not designed in the way to dispose of the connections after they where created.. alot of the time the connections remain open but are never used again, open 'dead' connections i guess you could say. they just remain connected until the server times them out, or until an admin goes in and removes the sleeping connections manually. im guessing this could be responsible for sometimes not able to connect errors etc. that we receive from other systems that try to access the mysql database? (connections limit reached) could this slow down the server as well? curious what all this could exactly cause. thanks!

  Read the article

• Template loading slowness on VPN

  - by Mesut

  Hi All We have got lots of Word templates on our network. They are perfectly working on local area network. However, if users try to create a new word document from a template when they are connected to VPN outside of the office, it takes nearly 20 minutes to create a word file which is not reasonable at all. Have you guys ever come across with this type of issue? if yes, any suggestion or help would be appreciated. Many Thanks from now on. Best Regards Mesut

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >