Search Results

Search found 5830 results on 234 pages for 'dr casper black'.

Page 182/234 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• How to do geometric projection shadows?

  - by John Murdoch

  I have decided that since my game world is mostly flat I don't need better shadows than geometric projections - at least for now. The only problem is I don't even know how to do those properly - that is to produce a 4x4 matrix which would render shadows for my objects (that is, I guess, project them on a horizontal XZ plane). I would like a light source at infinity (e.g., the sun at some point in the sky) and thus parallel projection. My current code does something that looks almost right for small flying objects, but actually is a very rude approximation, as it doesn't project the objects onto the ground, but simply moves them there (I think). Also it always wrongly assumes the sun is always on the zenith (projecting straight down). Gdx.gl20.glEnable(GL10.GL_BLEND); Gdx.gl20.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); //shells shellTexture.bind(); shader.begin(); for (ShellState state : shellStates.values()) { transform.set(camera.combined); transform.mul(state.transform); shader.setUniformMatrix("u_worldView", transform); shader.setUniformi("u_texture", 0); shellMesh.render(shader, GL10.GL_TRIANGLES); } shader.end(); // shadows shader.begin(); for (ShellState state : shellStates.values()) { transform.set(camera.combined); m4.set(state.transform); state.transform.getTranslation(v3); m4.translate(0, -v3.y + 0.5f, 0); // TODO HACK: + 0.5f is a hack to ensure the shadow appears above the ground; this is overall a hack as we are just moving the shell to the surface instead of projecting it on the surface! transform.mul(m4); shader.setUniformMatrix("u_worldView", transform); shader.setUniformi("u_texture", 0); // TODO: make shadow black somehow shellMesh.render(shader, GL10.GL_TRIANGLES); } shader.end(); Gdx.gl.glDisable(GL10.GL_BLEND); So my questions are: a) What is the proper way to produce a Matrix4 to pass to openGL which would render the shadows for my objects? b) I am supposed to use another fragment shader for the shadows which would paint them in semi-transparent grey, correct? c) The limitation of this simplistic approach is that whenever there is some object on the ground (it is not flat) the shadows will not be drawn, correct? d) Do I need to add something very small to the y (up) coordinate to avoid z-fighting with ground textures? Or is the fact they will be semi-transparent enough to resolve that problem?

  Read the article

• More Maintenance Plan Weirdness

  - by AjarnMark

  I’m not a big fan of the built-in Maintenance Plan functionality in SQL Server.  I like the interface in SQL 2005 better than 2000 (it looks more like building an SSIS package) but it’s still a bit of a black box.  You don’t really know what commands are being run based on the selections you have made, and you can easily make some unwise choices without realizing it, such as shrinking your database on a regular basis.  I really prefer to know exactly what commands and with which options are being run on my servers. Recently I had another very strange thing happen with a Maintenance Plan, this time in SQL 2005, SP3.  I inherited this server and have done a bit of cleanup on it, but had not yet gotten around to replacing the Maintenance Plans with all my own scripts.  However, one of the maintenance plans which was just responsible for doing LOG backups was running more frequently than that system needed, and I thought I would just tweak the schedule a bit.  So I opened the Maintenance Plan and edited the properties of the Subplan, setting a new schedule, saved it and figured all was good to go.  But the next execution of the Scheduled Job that triggers the Maintenance Plan code failed with an error about the Owner of the job.  Specifically the error was, “Unable to determine if the owner (OldDomain\OldDBAUserID) of job MaintenancePlanName.Subplan has server access (reason: Could not obtain information about Windows NT group/user 'OldDomain\OldDBAUserID’..”  I was really confused because I had previously updated all of the jobs to have current accounts as the owners.  At first I thought it was just a fluke, but it happened on the next scheduled cycle so I investigated further and sure enough, that job had the old DBA’s account listed as the owner.  I fixed it and the job successfully ran to completion. Now, I don’t really like mysteries like that, so I did some more testing and verified that, sure enough, just editing the Subplan schedule and saving the Maintenance Job caused the Scheduled Job to be recreated with the old credentials.  I don’t know where it is getting those credentials, but I can only assume that it is the same as the original creator of the Maintenance Plan, and for some reason it insists on using that ID for the job owner.  I looked through the options in SSMA and could not find anything would let me easily set the value that I wanted it to use.  I suspect that if I did something like executing sp_changeobjectowner against the Maintenance Plan that it would use that new ID instead.  I’m sure that there is good reason that it works this way, but rather than mess around with it much more, I’m just going to spend my time rolling out my replacement scripts instead. Chalk this little hidden oddity up as yet one more reason I’m not a fan of Maintenance Plans.

  Read the article

• Failed 12.04 installation

  - by Rob Sayer

  I tried installing Ubuntu 12.04 today. Not an upgrade, a new installation. It didn't work. My computer specs: Computer: Compaq presario CQ-104CA OS: Windows 7 Home 64 bit CPU: AMD V140 BIOS: latest Graphics: amd m880g with ati mobility radeon hd 4250 Wireless: atheros ar9285 Internal HD:SATA I wasn't connected to the internet at the time ... I know of a number of people who have installed ubuntu unconnected and just updated later. It seemed to go normally until I got to the part where I chose to install dual boot linux/windows. Then, the screen went black and the following test appeared (I left out the [OK]'s): checking battery state starting crash report submission daemon stating cpu interrupts balancing daemon stopping system V runlevel compatibility starting configure network device security stopping configure network device security stopping cold plug devices stopping log initial device creation starting enable remaining boot-time encrypting devices starting configure network device security starting save udev log and update rules stopping save udev log and update rules stopping enable remaining boot-time encrypted block devices checking for running unattended-upgrades acpid: exiting speech-dispatcher disabled: edit /etc/default/speech-disorder At this point, the CD is ejected. Then nothing. If I press the return key, it boots Windows. I don't think that's what's supposed to happen. Thinking the cd media or dvd drive may have been faulty, I downloaded the .iso again and made a bootable USB stick, as per your instructions. This time there was no cryptic crash screen. It just booted windows. I can't find any log files it may have left. Thinking the amd64 version may have been the wrong one, I tried downloading the x86 version. Same thing, both from cd and usb drive. Note I downloaded both files twice. I doubt it was a corrupted d/l. This is supposed to be a simple, transparent install. I went to the time and trouble of looking up my devices and drivers re ubuntu beforehand, and was prepared to do some configuration, though I know someone who has the same wireless device and his worked righted out of the box. But I spent over 3 hours trying to install it with only the above to show for it.

  Read the article

• Ubuntu Sluggish and Graphics Problem after Nvidia Driver Update

  - by iam

  I just recently started using Ubuntu (12.04) since a few weeks ago and noticed that the interface is very slow and sluggish: On Dash, I have to type the entire app name and wait a few seconds before it shows up in the search box, and a bit later before it displays search result Opening new files or applications takes also quite long and awkward Dragging icons or moving app windows around is not very spontaneous too: I have to take extra attention in moving the mouse otherwise Ubuntu would not do a correct movement or might ends up doing something incorrect instead e.g. opening the windows to full screen options or move the file to different folders, which is frustrating My PC is a few years old already (1.7 GB RAM) so this could be a reason too but when I checked in System Monitor it's hardly ever consuming much memory. Plus web-surfing on Firefox is actually lightning fast (much more than Windows), so I suspect there might be something wrong with the graphics driver (mine is GeForce 7050). I checked around System Settings and found an option to update the Nvidia driver. So I tried it and restarted, as instructed. Now, I got into a big problem upon restart... as the login-screen windows (where I have to type in the password) would take several attempts to display and finally did not manage to (it'd freeze for several seconds before there's any movement again). The background screen also kept reloading several times too and at some point the screen turned black with pixelated color strips running on the bottom 1/3 of the screen, and after a long while the background screen would come up again. Eventually I'd manage to be able to access the desktop but the launcher, top menu bar and app windows border would not disappear. I searched around and found many other people have this similar problem after updating Nvidia driver too, and on some threads the suggestion is to use "killall -u $USER" in command line (it's the only thing among various online suggestions I could do, as at that point I could not access Terminal without the launcher - Ctrl-Alt-T doesn't work for me). So I did that and was able to access the desktop correctly again with launchee/menu by creating a new account. But I would still have the same problem if logging into my original account. So I just finally tried upgrading to 12.10 and now can access my original account with fully-functional desktop - the launcher, menu and windows border are all back now. However, the problem with sluggishness still remains. And now I get scared of ever having to update the Nvidia driver again! I wonder if anyone knows what's the reason that updating the Nvidia driver is causing this problem and is there a way I can update it safely in the future? I'm still not sure how to solve the problem with the sluggishness too and not sure where else to look to find a solution.

  Read the article

• Map and fill texture using PBO (OpenGL 3.3)

  - by NtscCobalt

  I'm learning OpenGL 3.3 trying to do the following (as it is done in D3D)... Create Texture of Width, Height, Pixel Format Map texture memory Loop write pixels Unmap texture memory Set Texture Render Right now though it renders as if the entire texture is black. I can't find a reliable source for information on how to do this though. Almost every tutorial I've found just uses glTexSubImage2D and passes a pointer to memory. Here is basically what my code does... (In this case it is generating an 1-byte Alpha Only texture but it is rendering it as the red channel for debugging) GLuint pixelBufferID; glGenBuffers(1, &pixelBufferID); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, pixelBufferID); glBufferData(GL_PIXEL_UNPACK_BUFFER, 512 * 512 * 1, nullptr, GL_STREAM_DRAW); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); GLuint textureID; glGenTextures(1, &textureID); glBindTexture(GL_TEXTURE_2D, textureID); glTexImage2D(GL_TEXTURE_2D, 0, GL_R8, 512, 512, 0, GL_RED, GL_UNSIGNED_BYTE, nullptr); glBindTexture(GL_TEXTURE_2D, 0); glBindTexture(GL_TEXTURE_2D, textureID); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, pixelBufferID); void *Memory = glMapBuffer(GL_PIXEL_UNPACK_BUFFER, GL_WRITE_ONLY); // Memory copied here, I know this is valid because it is the same loop as in my working D3D version glUnmapBuffer(GL_PIXEL_UNPACK_BUFFER); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); And then here is the render loop. // This chunk left in for completeness glUseProgram(glProgramId); glBindVertexArray(glVertexArrayId); glBindBuffer(GL_ARRAY_BUFFER, glVertexBufferId); glEnableVertexAttribArray(0); glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 20, 0); glVertexAttribPointer(0, 2, GL_FLOAT, GL_FALSE, 20, 12); GLuint transformLocationID = glGetUniformLocation(3, 'transform'); glUniformMatrix4fv(transformLocationID , 1, true, somematrix) // Not sure if this is all I need to do glBindTexture(GL_TEXTURE_2D, pTex->glTextureId); GLuint textureLocationID = glGetUniformLocation(glProgramId, "texture"); glUniform1i(textureLocationID, 0); glDrawArrays(GL_TRIANGLES, Offset*3, Triangles*3); Vertex Shader #version 330 core in vec3 Position; in vec2 TexCoords; out vec2 TexOut; uniform mat4 transform; void main() { TexOut = TexCoords; gl_Position = vec4(Position, 1.0) * transform; } Pixel Shader #version 330 core uniform sampler2D texture; in vec2 TexCoords; out vec4 fragColor; void main() { // Output color fragColor.r = texture2D(texture, TexCoords).r; fragColor.g = 0.0f; fragColor.b = 0.0f; fragColor.a = 1.0; }

  Read the article

• Mobile Apps for Oracle E-Business Suite

  - by Carlos Chang

  Crosspost from the mobile apps blog.  TL;DR Oracle E-Business Suite is now building mobile apps with Oracle Mobile Application Framework (MAF). Believe it! Build iOS and Android apps with once code base and get it done! By Steven Chan (Oracle Development)  Many things have changed in the mobile space over the last few years. Here's an update on our strategy for mobile apps for the E-Business Suite. Mobile app strategy We're building our family of mobile apps for the E-Business Suite using Oracle Mobile Application Framework.  This framework allows us to write a single application that can be run on Apple iOS and Google Android platforms. Mobile apps for the E-Business Suite will share a common look-and-feel. The E-Business Suite is a suite of over 200 product modules spanning Financials, Supply Chain, Human Resources, and many other areas. Our mobile app strategy is to release standalone apps for specific product modules.  Our Oracle Timecards app, which allows users to create and submit timecards, is an example of a standalone app. Some common functions that span multiple product areas will have dedicated apps, too. An example of this is ourOracle Approvals app, which allows users to review and approve requests for expenses, requisitions, purchase orders, recruitment vacancies and offers, and more. You can read more about our Oracle Mobile Approvals app here: Now Available: Oracle Mobile Approvals for iOS Our goal is to support smaller screen (e.g. smartphones) as well as larger screens (e.g. tablets), with the smaller screen versions generally delivered first.  Where possible, we will deliver these as universal apps.  An example is our Oracle Mobile Field Service app, which allows field service technicians to remotely access customer, product, service request, and task-related information.  This app can run on a smartphone, while providing a richer experience for tablets. Deploying EBS mobile apps The mobile apps, themselves (i.e. client-side components) can be downloaded by end-users from the Apple iTunes today.  Android versions will be available from Google play. You can monitor this blog for Android-related updates. Where possible, our mobile apps should be deployable with a minimum of server-side changes.  These changes will generally involve a consolidated server-side patch for technology-stack components, and possibly a server-side patch for the functional product module. Updates to existing mobile apps may require new server-side components to enable all of the latest mobile functionality. All EBS product modules are certified for internal intranet deployments (i.e. used by employees within an organization's firewall).  Only a subset of EBS products such as iRecruitment are certified to be deployed externally (i.e. used by non-employees outside of an organization's firewall).  Today, many organizations running the E-Business Suite do not expose their EBS environment externally and all of the mobile apps that we're building are intended for internal employee use.  Recognizing this, our mobile apps are currently designed for users who are connected to the organization's intranet via VPN.  We expect that this may change in future updates to our mobile apps. Mobile apps and internationalization The initial releases of our mobile apps will be in English.  Later updates will include translations for all left-to-right languages supported by the E-Business Suite.  Right-to-left languages will not be translated. Customizing apps for enterprise deployments The current generation of mobile apps for Oracle E-Business Suite cannot be customized. We are evaluating options for limited customizations, including corporate branding with logos, corporate color schemes, and others. This is a potentially-complex area with many tricky implications for deployment and maintenance.  We would be interested in hearing your requirements for customizations in enterprise deployments.Prerequisites Apple iOS 7 and higher Android 4.1 (API level 16) and higher, with minimum CPU/memory configurations listed here EBS 12.1: EBS 12.1.3 Family Packs for the related product module EBS 12.2.3 References Oracle E-Business Suite Mobile Apps, Release 12.1 and 12.2 Documentation (Note 1641772.1) Oracle E-Business Suite Mobile Apps Administrator's Guide, Release 12.1 and 12.2 (Note 1642431.1) Follow @OracleMobile on Twitter Oracle Mobile Blog is here. 

  Read the article

• Webcast Replay : SANS Institute Product Review of Oracle Identity Manager

  - by B Shashikumar

  Thanks to everyone who attended the SANS Institute webinar covering the product review of Oracle Identity Manager. And a special thanks to our guest speakers from SuperValu - Phillip Black and Patrick Abreo. If you missed the webcast, you can catch a replay here  And here are the slides that were used in the webcast.  There were many questions that we could not answer as we ran out of time. We have captured some of the questions with responses below. Is Oracle Identity Analytics still offered as a separate product or is it part of Oracle Identity Manager? Oracle Identity Manager and Oracle Identity Analytics are now offered as part of Oracle Identity Governance Suite. OIA and OIM share a common UI architecture, common data model and common support for connected and disconnected resources.  When requesting new access/entitlements is there an approval process? Yes. We leverage SOA BPEL-based workflows for approvals  Are the identity self service capabilities based on Oracle ADF? Yes they are completely based on Oracle ADF  Can you give some examples of personalization and customization with Oracle Identity Manager 11gR2? With the new UI config framework we can enable different levels of UI customization. Customers now have the ability to Point & click to customize; or drag and drop customization without any need for coding. So users can easily personalize the interface of their application within the browser. For example, they can change the logo, Rearrange, hide Home Page regions; regularly searched items can be saved and re-used; Searchable & search results columns can be configured; Sorting preferences are remembered and so on. For more sophisticated customization, Customers can also edit the standard JSF within the page to alter business rules, modify page flows, page layouts and other items. Can you explain the role of sandboxes in customization? Customers can make their custom changes within a sandbox so that it doesn’t impact their production environment. They can make their changes, validate those changes, stage and then commit those changes without affecting production users. This is similar to how source code control systems like perforce work To watch a replay of the webcast, click here

  Read the article

• Partner Blog Series: PwC Perspectives - The Gotchas, The Do's and Don'ts for IDM Implementations

  - by Tanu Sood

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Verdana","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Arial Narrow","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} It is generally accepted among business communities that technology by itself is not a silver bullet to all problems, but when it is combined with leading practices, strategy, careful planning and execution, it can create a recipe for success. This post attempts to highlight some of the best practices along with dos & don’ts that our practice has accumulated over the years in the identity & access management space in general, and also in the context of R2, in particular. Best Practices The following section illustrates the leading practices in “How” to plan, implement and sustain a successful OIM deployment, based on our collective experience. Planning is critical, but often overlooked A common approach to planning an IAM program that we identify with our clients is the three step process involving a current state assessment, a future state roadmap and an executable strategy to get there. It is extremely beneficial for clients to assess their current IAM state, perform gap analysis, document the recommended controls to address the gaps, align future state roadmap to business initiatives and get buy in from all stakeholders involved to improve the chances of success. When designing an enterprise-wide solution, the scalability of the technology must accommodate the future growth of the enterprise and the projected identity transactions over several years. Aligning the implementation schedule of OIM to related information technology projects increases the chances of success. As a baseline, it is recommended to match hardware specifications to the sizing guide for R2 published by Oracle. Adherence to this will help ensure that the hardware used to support OIM will not become a bottleneck as the adoption of new services increases. If your Organization has numerous connected applications that rely on reconciliation to synchronize the access data into OIM, consider hosting dedicated instances to handle reconciliation. Finally, ensure the use of clustered environment for development and have at least three total environments to help facilitate a controlled migration to production. If your Organization is planning to implement role based access control, we recommend performing a role mining exercise and consolidate your enterprise roles to keep them manageable. In addition, many Organizations have multiple approval flows to control access to critical roles, applications and entitlements. If your Organization falls into this category, we highly recommend that you limit the number of approval workflows to a small set. Most Organizations have operations managed across data centers with backend database synchronization, if your Organization falls into this category, ensure that the overall latency between the datacenters when replicating the databases is less than ten milliseconds to ensure that there are no front office performance impacts. Ingredients for a successful implementation During the development phase of your project, there are a number of guidelines that can be followed to help increase the chances for success. Most implementations cannot be completed without the use of customizations. If your implementation requires this, it’s a good practice to perform code reviews to help ensure quality and reduce code bottlenecks related to performance. We have observed at our clients that the development process works best when team members adhere to coding leading practices. Plan for time to correct coding defects and ensure developers are empowered to report their own bugs for maximum transparency. Many organizations struggle with defining a consistent approach to managing logs. This is particularly important due to the amount of information that can be logged by OIM. We recommend Oracle Diagnostics Logging (ODL) as an alternative to be used for logging. ODL allows log files to be formatted in XML for easy parsing and does not require a server restart when the log levels are changed during troubleshooting. Testing is a vital part of any large project, and an OIM R2 implementation is no exception. We suggest that at least one lower environment should use production-like data and connectors. Configurations should match as closely as possible. For example, use secure channels between OIM and target platforms in pre-production environments to test the configurations, the migration processes of certificates, and the additional overhead that encryption could impose. Finally, we ask our clients to perform database backups regularly and before any major change event, such as a patch or migration between environments. In the lowest environments, we recommend to have at least a weekly backup in order to prevent significant loss of time and effort. Similarly, if your organization is using virtual machines for one or more of the environments, it is recommended to take frequent snapshots so that rollbacks can occur in the event of improper configuration. Operate & sustain the solution to derive maximum benefits When migrating OIM R2 to production, it is important to perform certain activities that will help achieve a smoother transition. At our clients, we have seen that splitting the OIM tables into their own tablespaces by categories (physical tables, indexes, etc.) can help manage database growth effectively. If we notice that a client hasn’t enabled the Oracle-recommended indexing in the applicable database, we strongly suggest doing so to improve performance. Additionally, we work with our clients to make sure that the audit level is set to fit the organization’s auditing needs and sometimes even allocate UPA tables and indexes into their own table-space for better maintenance. Finally, many of our clients have set up schedules for reconciliation tables to be archived at regular intervals in order to keep the size of the database(s) reasonable and result in optimal database performance. For our clients that anticipate availability issues with target applications, we strongly encourage the use of the offline provisioning capabilities of OIM R2. This reduces the provisioning process for a given target application dependency on target availability and help avoid broken workflows. To account for this and other abnormalities, we also advocate that OIM’s monitoring controls be configured to alert administrators on any abnormal situations. Within OIM R2, we have begun advising our clients to utilize the ‘profile’ feature to encapsulate multiple commonly requested accounts, roles, and/or entitlements into a single item. By setting up a number of profiles that can be searched for and used, users will spend less time performing the same exact steps for common tasks. We advise our clients to follow the Oracle recommended guides for database and application server tuning which provides a good baseline configuration. It offers guidance on database connection pools, connection timeouts, user interface threads and proper handling of adapters/plug-ins. All of these can be important configurations that will allow faster provisioning and web page response times. Many of our clients have begun to recognize the value of data mining and a remediation process during the initial phases of an implementation (to help ensure high quality data gets loaded) and beyond (to support ongoing maintenance and business-as-usual processes). A successful program always begins with identifying the data elements and assigning a classification level based on criticality, risk, and availability. It should finish by following through with a remediation process. Dos & Don’ts Here are the most common dos and don'ts that we socialize with our clients, derived from our experience implementing the solution. Dos Don’ts Scope the project into phases with realistic goals. Look for quick wins to show success and value to the stake holders. Avoid “boiling the ocean” and trying to integrate all enterprise applications in the first phase. Establish an enterprise ID (universal unique ID across the enterprise) earlier in the program. Avoid major UI customizations that require code changes. Have a plan in place to patch during the project, which helps alleviate any major issues or roadblocks (product and database). Avoid publishing all the target entitlements if you don't anticipate their usage during access request. Assess your current state and prepare a roadmap to address your operations, tactical and strategic goals, align it with your business priorities. Avoid integrating non-production environments with your production target systems. Defer complex integrations to the later phases and take advantage of lessons learned from previous phases Avoid creating multiple accounts for the same user on the same system, if there is an opportunity to do so. Have an identity and access data quality initiative built into your plan to identify and remediate data related issues early on. Avoid creating complex approval workflows that would negative impact productivity and SLAs. Identify the owner of the identity systems with fair IdM knowledge and empower them with authority to make product related decisions. This will help ensure overcome any design hurdles. Avoid creating complex designs that are not sustainable long term and would need major overhaul during upgrades. Shadow your internal or external consulting resources during the implementation to build the necessary product skills needed to operate and sustain the solution. Avoid treating IAM as a point solution and have appropriate level of communication and training plan for the IT and business users alike. Conclusion In our experience, Identity programs will struggle with scope, proper resourcing, and more. We suggest that companies consider the suggestions discussed in this post and leverage them to help enable their identity and access program. This concludes PwC blog series on R2 for the month and we sincerely hope that the information we have shared thus far has been beneficial. For more information or if you have questions, you can reach out to Rex Thexton, Senior Managing Director, PwC and or Dharma Padala, Director, PwC. We look forward to hearing from you. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Meet the Writers: Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL).

  Read the article

• Media server...serving files...............for a limited time only

  - by Craig

  I’m new to Ubuntu and am seeking help with a media server I have built. I have a couple of HTPCs in my house running XBMC. I wanted to build one for the family room working double duty as a HTPC, and media server to share movies, TV shows, music, etc. on my Windows network. So using some spare old parts I had lying around I decided to go CRAZY and build my first Linux box. I used Ubuntu because it seemed to be the most user friendly variant, especially for people that are new to Linux. I had to do a few things to get the media files shared properly on my network: Made sure my two media drives auto-mount every time I boot the computer by editing the “fstab” file – “sudo nano /etc/fstab” Installed Samba - “sudo apt-get install samba” Set a password for Samba - “sudo smbpasswd –a USERNAME” Edited the Samba configuration file to make sure the computer was in my networks workgroup – “sudo nano /etc/samba/smb.conf” In the file manager (not sure if that’s the right name for it), I right-clicked my media folders and set the sharing and permissions. The sharing was done without guest access, and permissions were set to; Owner, Group, and Others - Access: Create and Delete Files. Adjusted the Power Management settings to never put the system into sleep mode. I checked to see if I had access to the files from a Windows 7 machine and I did (Woo Hoo!). But when I tried to play any of my video files from the Windows machine (using VLC media player), they would only play for about 2-5 minutes and then they would stop with an error message saying that the file could not be accessed (Booo...). I tried playing some files through XBMC running in Windows and they worked for a bit longer (about 10-15mins), but they also stopped playing. I installed the Linux version of XBMC on the server and played the files locally with no problems. It doesn’t seem to be an issue with the files themselves, it seems to be a sharing problem on my network. So my question to the Ubuntu gurus out there is: Did I miss adding/editing something in the Samba configuration file? Did I use the right method to share my media files (file manager vs. using the terminal)? Is it possible for the computer to still go to sleep without the screen going black (does that even make sense?). Are there any special settings in Ubuntu that I should be using since this computer as a media server (is there a media server mode?...!...?). Any help on this matter would be greatly appreciated. Thanks

  Read the article

• 3D terrain map with Hexagon Grids (XNA)

  - by Rob

  I'm working on a hobby project (I'm a web/backend developer by day) and I want to create a 3D Tile (terrain) engine. I'm using XNA, but I can use MonoGame, OpenGL, or straight DirectX, so the answer does not have to be XNA specific. I'm more looking for some high level advice on how to approach this problem. I know about creating height maps and such, there are thousands of references out there on the net for that, this is a bit more specific. I'm more concerned with is the approach to get a 3D hexagon tile grid out of my terrain (since the terrain, and all 3d objects, are basically triangles). The first approach I thought about is to basically draw the triangles on the screen in the following order (blue numbers) to give me the triangles for terrain (black triangles) and then make hexes out of the triangles (red hex). http://screencast.com/t/ebrH2g5V This approach seems complicated to me since i'm basically having to draw 4 different types of triangles. The next approach I thought of was to use the existing triangles like I did for a square grid and get my hexes from 6 triangles as follows http://screencast.com/t/w9b7qKzVJtb8 This seems like the easier approach to me since there are only 2 types of triangles (i would have to play with the heights and widths to get a "perfect" hexagon, but the idea is the same. So I'm looking for: 1) Any suggestions on which approach I should take, and why. 2) How would I translate mouse position to a hexagon grid position (especially when moving the camera around), for example in the second image if the mouse pointer were the green circle, how would I determine to highlight that hexagon and then translating that into grid coordinates (assuming it is 0,0)? 3) Any references, articles, books, etc - to get me going in the right direction. Note: I've done hex grid's and mouse-grid coordinate conversion before in 2d. looking for some pointers on how to do the same in 3d. The result I would like to achieve is something similar to the following: http :// www. youtube .com / watch?v=Ri92YkyC3fw (sorry about the youtube link, but it will only let me post 2 links in this post... same rep problem i mention below...) Thanks for any help! P.S. Sorry for not posting the images inline, I apparently don't have enough rep on this stack exchange site.

  Read the article

• 12.04 boots fine, with graphical splash screen, but then Monitor "out of range"

  - by Jim Bednar

  I see dozens of posts from people whose monitors are saying "out of range" under Ubuntu; seems like there are some serious problems in Ubuntu with autodetection of monitor capabilities. :-( But none of the many, many suggestions I found have solved my problem, and right now I can't use anything graphical on this machine! History: I installed Ubuntu 12.04 on my HP Proliant Microserver N40L, which worked reasonably at the default resolution across several reboots. At some point I noticed that the proprietary video driver was not in use, and tried to install one to get better window-drawing speeds, but it failed with some sort of error, and I gave up on that. A few weeks later when I next rebooted, it showed the usual BIOS screen and various boot loading screens (including GRUB), and then the usual purple Ubuntu splash screen with the dots showing that things were loading, but when it finished booting the monitor went black and eventually showed "Out of range" (with no other information). Given that there were several weeks between reboots (it's a server, after all), I've no idea if it was some system update, trying to install the proprietary drivers, or something else that caused the problem. Anyway, the system has booted fine, as I can do Ctrl-Alt-F1 to get a text prompt and can log in there. But Ctrl-Alt-F7 goes back to the out of range error. Some posters said to try Ctrl-Alt-- (minus) to cycle through resolutions until one works, but that didn't have any visible effect. Many, many others said it was a grub problem, which seems unlikely given that grub's screen looks fine, but I tried editing /etc/default/grub to set a particular resolution (trying many of them) and running update-grub, with no apparent effect. Rebooting into failsafe mode works the same as regular mode. Replacing xorg.conf with xorg.conf.failsafe works the same too. I'm at my wits' end! Isn't there anything I can do to convince Ubuntu to choose a mode that the monitor supports? E.g. the one that it is using for the splash screen? I don't need great resolution on this machine, just anything that works!!!!! Help!!!!!! Please!!!!

  Read the article

• Why is my system freezing when I switch users

  - by ZeroDivide

  Hello I've recently upgraded from 13.04 to 13.10 64bit. I'm running AMD graphics with the proprietary drivers. I have two user accounts. Mine(administrator) and my girlfriend's(standard) My girlfriend clicks "switch user" from my lock screen and logs in fine. I then try to click "switch user" from her lock screen and everything goes black. Then the monitor blinks on and off with just a single cursor. I have no way to access the terminal, the system is unresponsive and I have to hit the power button. Even ctrl + alt + f4 or ctrl + alt + t doesn't get me a terminal. When I press the power button on my system, it does start printing out the shutdown sequence on the monitor. Here is my .xsession-errors Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. Here is hers: init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd respawning too fast, stopped init: logrotate main process (4726) killed by TERM signal init: upstart-dbus-session-bridge main process (4865) terminated with status 1 init: gnome-settings-daemon main process (4843) terminated with status 1 init: gnome-session main process (4852) terminated with status 1 init: unity-panel-service main process (4863) killed by KILL signal I found some advice in a forum to look for at-spi2-registryd in my system logs. Perhaps it will be useful. executing this: sudo grep -r at-spi2-registryd /var/log/* produces this: /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Unable to register client with session manager /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Unable to register client with session manager Any ideas what is going on?

  Read the article

• Dealing with coworkers when developing, need advice [closed]

  - by Yippie-Kai-Yay

  I developed our current project architecture and started developing it on my own (reaching something like, revision 40). We're developing a simple subway routing framework and my design seemed to be done extremely well - several main models, corresponding views, main logic and data structures were modeled "as they should be" and fully separated from rendering, algorithmic part was also implemented apart from the main models and had a minor number of intersection points. I would call that design scalable, customizable, easy-to-implement, interacting mostly based on the "black box interaction" and, well, very nice. Now, what was done: I started some implementations of the corresponding interfaces, ported some convenient libraries and wrote implementation stubs for some application parts. I had the document describing coding style and examples of that coding style usage (my own written code). I forced the usage of more or less modern C++ development techniques, including no-delete code (wrapped via smart pointers) and etc. I documented the purpose of concrete interface implementations and how they should be used. Unit tests (mostly, integration tests, because there wasn't a lot of "actual" code) and a set of mocks for all the core abstractions. I was absent for 12 days. What do we have now (the project was developed by 4 other members of the team): 3 different coding styles all over the project (I guess, two of them agreed to use the same style :), same applies to the naming of our abstractions (e.g CommonPathData.h, SubwaySchemeStructures.h), which are basically headers declaring some data structures. Absolute lack of documentation for the recently implemented parts. What I could recently call a single-purpose-abstraction now handles at least 2 different types of events, has tight coupling with other parts and so on. Half of the used interfaces now contain member variables (sic!). Raw pointer usage almost everywhere. Unit tests disabled, because "(Rev.57) They are unnecessary for this project". ... (that's probably not everything). Commit history shows that my design was interpreted as an overkill and people started combining it with personal bicycles and reimplemented wheels and then had problems integrating code chunks. Now - the project still does only a small amount of what it has to do, we have severe integration problems, I assume some memory leaks. Is there anything possible to do in this case? I do realize that all my efforts didn't have any benefit, but the deadline is pretty soon and we have to do something. Did someone have a similar situation? Basically I thought that a good (well, I did everything that I could) start for the project would probably lead to something nice, however, I understand that I'm wrong. Any advice would be appreciated, sorry for my bad english.

  Read the article

• The Nine Cs of Customer Engagement

  - by Michael Snow

  Avoid Social Media Fatigue - Learn the 9 C's of Customer Engagement inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Have We Hit a Social-Media Plateau? In recent years, social media has evolved from a cool but unproven medium to become the foundation of pragmatic social business and a driver of business value. Yet, time is running out for businesses to make the most out of this channel. This isn’t a warning. It’s a fact. Join leading industry analyst R “Ray” Wang as he explains how to apply the nine Cs of engagement to strengthen customer relationships. Learn: How to overcome social-media fatigue and make the most of the medium Why engagement is the most critical factor in the age of overexposure The nine pillars of successful customer engagement Register for the eighth Webcast in the Social Business Thought Leaders series today. Register Now Thurs., Sept. 20, 2012 10 a.m. PT / 1 p.m. ET Presented by: R “Ray” Wang Principal Analyst and CEO, Constellation Research Christian Finn Senior Director, Product Management Oracle Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement SEV100103386 Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time.Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

  Read the article

• Unable to boot ubuntu 11.10 from external usb drive

  - by user45006

  I'm new to Ubuntu (and actually all things Linux) as of this morning, so please excuse any stupid mistakes I may be making. I recently bought an external hard drive for my newly built PC (that is running windows 7 if it matters). I would like to install Ubuntu onto the external drive and boot from there. I downloaded Ubuntu 11.10 and made a bootable cd, unplugged my internal HDDs, plugged in the external drive, installed Ubuntu 11.10 on the external drive via the installer, and replugged in my internal HDDs. Then I set my bios boot order to: Boot from USB-HDD - Boot from Hard Disk - Boot from CD/DVD. Now when I restart I get the message "Starting Operating System..." (or something like that, I forget exactly what it says) that lingers on the screen for a moment and then windows starts. Any idea what the problem may be? ~Relevant info~ BIOS version: Award Software International, Inc. F2, 2/22/2011 Ubuntu Version: 11.10 External Hard Drive: Western Digital My Passport Essential 500GB Portable Hard Drive (Black) ~Things I've already tried~ 1) Unplug internal HDDs so that only external drive was plugged in via usb. Same thing happened only obviously my BIOS could not detect any hard drives besides the external one. When booting received error "Could not detect operating system" 2) Formatted external hard drive and re installed. It didn't make a difference, however interestingly when I booted from cd the ubuntu installer said it detected ubuntu 11.10 on the external hard drive. 3) Within BIOS I've messed around with every boot order combo I could think of both in the "Hard Disk boot order" screen and the "Boot order" screen. I'm a little confused of why there are two screens for this. 4) Held F12 during startup which opens (what I think is) the one time boot screen and it gave me the options "Hard Drive", "cd/dvd", "USB-FDD", "USB-cdrom", "USB-HDD", and "USB-something else I can't remember what it was". I tried all of them, but the same thing as before happened each time. ~References~ I noticed several people on askubuntu have tried to do something similar if not the exact same. In fact, I even found a post that pretty much outlines step by step exactly what I did... only their's worked. /jealous. Linky: Install Ubuntu or Kubuntu on a External USB Drive I'm willing to try a different version of ubuntu - it's not like my heart is set on 11.10, but it's a pain to open my case and unplug my internal hard drives so I'd prefer not to do this unless someone is reasonably confident it'll work. Thank you for all of your help in advance! I'm really looking forward to exploring Ubuntu!

  Read the article

• Gamification = -10#/3mo

  - by erikanollwebb

  One of the purposes of gamification of anything is to see if you can modify the behavior of the user. In the enterprise, that might mean getting sales people to enter more information into a CRM system, encouraging employees to update their HR records, motivating people to participate in forums and discussions, or process invoices more quickly.  Wikipedia defines behavior modification as "the traditional term for the use of empirically demonstrated behavior change techniques to increase or decrease the frequency of behaviors, such as altering an individual's behaviors and reactions to stimuli through positive and negative reinforcement of adaptive behavior and/or the reduction of behavior through its extinction, punishment and/or satiation."  Gamification is just a way to modify someone's behavior using game mechanics. And the magic question is always whether it works. So I thought I would present my own little experiment from the last few months.  This spring, I upgraded to a Samsung Galaxy 4.  It's a pretty sweet phone in many ways, but one of the little extras I discovered was a built in app called S Health. S Health is an app that you can use to track calories, weight, exercise and it has a built in pedometer. I looked at it when I got the phone, but assumed you had to turn it on to use it so I didn't look at it much.  But sometime in July, I realized that in fact, it just ran in the background and was quietly tracking my steps, with a goal of 10,000 per day.  10,000 steps per day is this magic number recommended by the Surgeon General and the American Heart Association.  Dr. Oz pushes it as the goal for daily exercise.  It's about 5 miles of walking. I'm generally not the kind of person who always has my phone with me.  I leave it in my purse and pull it out when I need it.  But then I realized that meant I wasn't getting a good measure of my steps.  I decided to do a little experiment, and carry it with me as much as possible for a week.  That's when I discovered the gamification that changed my life over the last 3 months.  When I hit 10,000 steps, the app jingled out a little "success!" tune and I got a badge.  I was hooked.  I started carrying my phone.  I started making sure I had shoes I could walk in with me.  I started walking at lunch time, because I realized how often I sat at my desk for 8-10 hours every day without moving.  I started pestering my husband to walk with me after work because I hadn't hit my 10,000 yet, leading him at one point to say "I'm not as much a slave to that badge as you are!"  I started looking at parking lots differently.  Can't get a space up close?  No worries, just that many steps toward my 10,000.  I even tried to see if there was a second power user level at 15,000 or 20,000 (*sadly, no).  If I was close at the end of the day, I have done laps around my house until I got my badge.  I have walked around the block one more time to get my badge.  I have mentally chastised myself when I forgot to put my phone in my pocket because I don't know how many steps I got.  The badge below I got when my boss and I were in New York City and we walked around the block of our hotel just to watch the badge pop up. There are a bunch of tools out on the market now that have similar ideas for helping you to track your exercise, make it social.  There are apps (my favorite is still Zombies, Run!).  You could buy a FitBit or UP by Jawbone.   Interactive fitness makes the Expresso stationary bike with built in video games.  All designed to help you be more aware of your activity and keep you engaged and motivated.  And the idea is to help you change your behavior. I know someone who would spend extra time and work hard on the Expresso because he had built up strategies for how to kill the most dragons while he was riding to get more points.  When the machine broke down, he didn't ride a different bike because it just wasn't that interesting. But for me, just the simple jingle and badge have been all I needed.  I admit, I still giggle gleefully when I hear the tune sing out from my pocket. After a few weeks, I noticed I had dropped a few pounds.  Not a lot, just 2-3.  But then I was really hooked.  I started making a point both to eat a little less and hit 10,000 steps as much as I could.  I bemoaned that during the floods in Boulder, I wasn't hitting my 10,000 steps.  And now, a few months later, I'm almost 10 lbs lighter. All for 1 badge a day. So yes, simple gamification can increase motivation and engagement.  And that can lead to changes in behavior.  Now the job is to apply that to the enterprise space in a meaningful and engaging way. 

  Read the article

• cocos2d-x simple shader usage [on hold]

  - by Narek

  I want to obtain color ramp effect from this tutorial: http://www.raywenderlich.com/10862/how-to-create-cool-effects-with-custom-shaders-in-opengl-es-2-0-and-cocos2d-2-x Here is my code in cocos2d-x 3: bool HelloWorld::init() { ////////////////////////////// // 1. super init first if ( !Layer::init() ) { return false; } Vec2 origin = Director::getInstance()->getVisibleOrigin(); sprite = Sprite::create("HelloWorld.png"); sprite->setAnchorPoint(Vec2(0, 0)); sprite->setRotation(3); sprite->setPosition(origin); addChild(sprite); std::string str = FileUtils::getInstance()->getStringFromFile("CSEColorRamp.fsh"); const GLchar * fragmentSource = str.c_str(); GLProgram* p = GLProgram::createWithByteArrays(ccPositionTextureA8Color_vert, fragmentSource); p->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_POSITION, GLProgram::VERTEX_ATTRIB_POSITION); p->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_TEX_COORD, GLProgram::VERTEX_ATTRIB_TEX_COORD); p->link(); p->updateUniforms(); sprite->setGLProgram(p); // 3 colorRampUniformLocation = glGetUniformLocation(sprite->getGLProgram()->getProgram(), "u_colorRampTexture"); glUniform1i(colorRampUniformLocation, 1); // 4 colorRampTexture = Director::getInstance()->getTextureCache()->addImage("colorRamp.png"); colorRampTexture->setAliasTexParameters(); // 5 sprite->getGLProgram()->use(); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, colorRampTexture->getName()); glActiveTexture(GL_TEXTURE0); return true; } And here is the fragment shader as it is in the tutorial: #ifdef GL_ES precision mediump float; #endif // 1 varying vec2 v_texCoord; uniform sampler2D u_texture; uniform sampler2D u_colorRampTexture; void main() { // 2 vec3 normalColor = texture2D(u_texture, v_texCoord).rgb; // 3 float rampedR = texture2D(u_colorRampTexture, vec2(normalColor.r, 0)).r; float rampedG = texture2D(u_colorRampTexture, vec2(normalColor.g, 0)).g; float rampedB = texture2D(u_colorRampTexture, vec2(normalColor.b, 0)).b; // 4 gl_FragColor = vec4(rampedR, rampedG, rampedB, 1); } As a result I get a black screen with 2 draw calls. What is wrong? Do I miss something?

  Read the article

• Need help with xorg.conf for dual Radeon HD6450 video cards with 4 monitors

  - by Eriks Goodwin-Pfister

  I am running 64-bit Ubuntu 13.10 with Unity and have dual (2) Radeon HD6450 video cards and 4 Hanns-G HL273 monitors. Each Radeon card is driving one monitor via DVI and the other via VGA. I am running the proprietary video drivers from AMD's web site: "amd-catalyst-13.11-beta V9.4-linux-x86.x86_64.run" I tried to use "amd-catalyst-13.12-linux-x86.x86_64.run" but could not get that newer version to install. What I need help with is how to "correct" my xorg.conf file and any other needed instructions to get all four of my monitors to work as a continuous desktop that allows me to drag things from one monitor to the next, etc. When I tried to use the default open source drivers that came in Ubuntu 13.10, only three of the monitors would work. Now that I am running the proprietary ones, all four monitors come on and I can move my mouse from one end to the other--but only the right-most monitor displays my desktop and allows me to "do anything". Any time I move my mouse to any of the other three monitors (which display all-white), it turns into an "X" and does not do anything else but move. Enabling xinerama makes all four displays go all-black after login. I do have amdcccle installed, but it does not seem to have the ability to handle my particular configuration. My Current xorg.conf: Section "ServerLayout" Identifier "Basic Layout" Screen 0 "Screen1" 5760 0 Screen 1 "Screen0" 0 0 Screen 2 "Screen2" 3840 0 Screen 3 "Screen3" 1920 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Device0" Driver "fglrx" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "fglrx" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Device2" Driver "fglrx" Option "Monitor-DFP2" "1-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:4:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Bootloader Problems Grub Won't Load Windows 7

  - by user108805

  I sent this to [email protected], still no response thought I could get a faster solution here. I am running Windows 7 64-bit and Ubuntu 12.04 LTS on separate partitions. The message is sent is: Boot-Repair URL: http://paste.ubuntu.com/1365163/ Originally I was unable to access Ubuntu after a windows update (Ubuntu was installed using wubi). Rather than logging into Ubuntu from the Windows 7 Bootloader, it lead to the grub command prompt. No matter what I did here, it would not log me into linux. As a result I uninstalled Ubuntu from the Add/Remove Programs application in Windows 7. I then re-installed Ubuntu 12.04 LTS using a liveCD-USB. This time however, I created a partition. I then restarted and got the GRUB bootloader which loads Ubuntu 12.04 LTS with no problems, however when I select windows (listed as "Windows 7 (loader)"), it just refreshes the grub bootloader instead of loading Windows 7. I then used the Windows 7 repair disk to run bootrec/fixmbr and bootrec/fixboot. This led to no bootloader coming up when I started my computer. Instead I got a blank black screen with a flashing white cursor. I went on to do a bootrec/buildbcd and bootrec/scanos. These did nothing to change the situation. When I ran bootrec/scanos it said that no Windows 7 installations were present. After this I decided to reinstall WIndows 7 only for this to do nothing to change the situation. Afterwards I did a boot-repair in which I began to get the GRUB bootloader, which would load ubuntu 12.04 LTS, but still would not load Windows 7. I also did a sudo update-grub which recognized Windows 7 as being installed, but still didn't fix the issue of loading Windows 7. While running Ubuntu I have no problem accessing my WIndows 7 partition which is formatted as NTFS. It shows all the files and folders reflecting that the re-install did take place, and it also shows all of my old applications and folders in the Windows.old folder. I am completely stuck at this point and have no clue what I should do next. Any help you can offer me will be greatly appreciate. Thank You --gap

  Read the article

• Problem with OpenGL or Unity, need Gnome fallback mode

  - by William Wind

  This question is in two parts, and I have been searching the web for days to find answers. With no luck I thought I'd drop by and ask for your help. Here goes: 1.) I'm running Ubuntu 13.04 and one day last week Unity suddenly wound't work. After the login screen, I was either faced with an all black and non-responsive screen, or sometimes it booted and I could see my desktop wallpaper (and add and remove icons/folders from the desktop). But there was no menu in the left hand side and no top bar :-( However I could still enter the terminal. I borrowed my dad's laptop and looked for a solution online. About two days later I gave up (I'm still kind of a n00b at Linux) and found a way to install Gnome Fallback, via the terminal. When I used it, I had the same problem. [clue #1] Missing menues. But if I rebooted into Gnome Fallback mode with no effects. It worked. Great! I have used that for some days now, while still trying to fix the original problem with either Unity or OpenGl or whatever went wrong in the first place. With no luck. After giving up on my search for a fix (I know that came out wrong) -- I decided to reinstall Ubuntu 13.04 from a CD. But! After that I was left where I began. When booting into my account, it only shows the desktop wallpaper and the icons. I can click and enter the folders, but not go into the menues. Last time I fixed it with Gnome Fallback mode, because I could enter the terminal and the PC was automatically online, via wireless network. But not this time, I can't get online. So: 1.) How do I via the LiveCD Ubuntu version (the one I'm using right now) install Gnome Fallback unto the harddrive based system? 2.) If impossible. How can I access the wireless Internet via the terminal, so I can install Gnome Fallback, from the "broken" Unity session. 3.) Is there any other things that I should try? Please help me, PS: My GFX-card is an ATI Radeon something and I have install and used the "Redwood" drive (I think its called) for many weeks prior to the shutdown.

  Read the article

• Why doesn't my texture display with this GLSL shader?

  - by Chewy Gumball

  I am trying to display a DXT1 compressed texture on a quad using a VBO and shaders, but I have been unable to get it working. All I get is a black square. I know my texture is uploaded properly because when I use immediate mode without shaders the texture displays fine but I will include that part just in case. Also, when I change the gl_FragColor to something like vec4 (0.0, 1.0, 1.0, 1.0) then I get a nice blue quad so I know that my shader is able to set the colour. It appears to be either the texture is not being bound correctly in the shader or the texture coordinates are not being picked up. However, I can't find the error! What am I doing wrong? I am using OpenTK in C# (not xna). Vertex Shader: void main() { gl_TexCoord[0] = gl_MultiTexCoord0; // Set the position of the current vertex gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex; } Fragment Shader: uniform sampler2D diffuseTexture; void main() { // Set the output color of our current pixel gl_FragColor = texture2D(diffuseTexture, gl_TexCoord[0].st); //gl_FragColor = vec4 (0.0,1.0,1.0,1.0); } Drawing Code: int vb, eb; GL.GenBuffers(1, out vb); GL.GenBuffers(1, out eb); // Position Texture float[] verts = { 0.1f, 0.1f, 0.0f, 0.0f, 0.0f, 1.9f, 0.1f, 0.0f, 1.0f, 0.0f, 1.9f, 1.9f, 0.0f, 1.0f, 1.0f, 0.1f, 1.9f, 0.0f, 0.0f, 1.0f }; uint[] indices = { 0, 1, 2, 0, 2, 3 }; //upload data to the VBO GL.BindBuffer(BufferTarget.ArrayBuffer, vb); GL.BindBuffer(BufferTarget.ElementArrayBuffer, eb); GL.BufferData(BufferTarget.ArrayBuffer, (IntPtr)(verts.Length * sizeof(float)), verts, BufferUsageHint.StaticDraw); GL.BufferData(BufferTarget.ElementArrayBuffer, (IntPtr)(indices.Length * sizeof(uint)), indices, BufferUsageHint.StaticDraw); //Upload texture int buffer = GL.GenTexture(); GL.BindTexture(TextureTarget.Texture2D, buffer); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapS, (float)TextureWrapMode.Repeat); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapT, (float)TextureWrapMode.Repeat); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMagFilter, (float)TextureMagFilter.Linear); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMinFilter, (float)TextureMinFilter.Linear); GL.TexEnv(TextureEnvTarget.TextureEnv, TextureEnvParameter.TextureEnvMode, (float)TextureEnvMode.Modulate); GL.CompressedTexImage2D(TextureTarget.Texture2D, 0, texture.format, texture.width, texture.height, 0, texture.data.Length, texture.data); //Draw GL.UseProgram(shaderProgram); GL.EnableClientState(ArrayCap.VertexArray); GL.EnableClientState(ArrayCap.TextureCoordArray); GL.VertexPointer(3, VertexPointerType.Float, 5 * sizeof(float), 0); GL.TexCoordPointer(2, TexCoordPointerType.Float, 5 * sizeof(float), 3); GL.ActiveTexture(TextureUnit.Texture0); GL.Uniform1(GL.GetUniformLocation(shaderProgram, "diffuseTexture"), 0); GL.DrawElements(BeginMode.Triangles, indices.Length, DrawElementsType.UnsignedInt, 0);

  Read the article

• Randomly generate directed graph on a grid

  - by Talon876

  I am trying to randomly generate a directed graph for the purpose of making a puzzle game similar to the ice sliding puzzles from Pokemon. This is essentially what I want to be able to randomly generate: http://bulbanews.bulbagarden.net/wiki/Crunching_the_numbers:_Graph_theory. I need to be able to limit the size of the graph in an x and y dimension. In the example given in the link, it would be restricted to an 8x4 grid. The problem I am running into is not randomly generating the graph, but randomly generating a graph, which I can properly map out in a 2d space, since I need something (like a rock) on the opposite side of a node, to make it visually make sense when you stop sliding. The problem with this is that sometimes the rock ends up in the path between two other nodes or possibly on another node itself, which causes the entire graph to become broken. After discussing the problem with a few people I know, we came to a couple of conclusions that may lead to a solution. Including the obstacles in the grid as part of the graph when constructing it. Start out with a fully filled grid and just draw a random path and delete out blocks that will make that path work. The problem then becomes figuring out which ones to delete to avoid introducing an additional, shorter path. We were also thinking a dynamic programming algorithm may be beneficial, though none of us are too skilled with creating dynamic programming algorithms from nothing. Any ideas or references about what this problem is officially called (if it's an official graph problem) would be most helpful. Here are some examples of what I have accomplished so far by just randomly placing blocks and generating the navigation graph from the chosen start/finish. The idea (as described in the previous link) is you start at the green S and want to get to the green F. You do this by moving up/down/left/right and you continue moving in the direction chosen until you hit a wall. In these pictures, grey is a wall, white is the floor, and the purple line is the minimum length from start to finish, and the black lines and grey dots represented possible paths. Here are some bad examples of randomly generated graphs: http://i.stack.imgur.com/9uaM6.png Here are some good examples of randomly generated (or hand tweaked) graphs: i.stack.imgur.com/uUGeL.png (can't post another link, sorry) I've also seemed to notice the more challenging ones when actually playing this as a puzzle are ones which have lots of high degree nodes along the minimum path.

  Read the article

• My image is not showing in java, using ImageIcon

  - by user1048606

  I'd like to know why my images are now showing up when I use ImageIcon and when I have specified the directory the image is in. All I get is a black blank screen with nothing else on it. import java.awt.Image; import java.awt.event.KeyEvent; import javax.swing.ImageIcon; import java.awt.Image; import java.awt.event.KeyEvent; import java.util.ArrayList; import javax.swing.ImageIcon; // Class for handling key input public class Craft { private int dx; private int dy; private int x; private int y; private Image image; private Image image2; private ArrayList missiles; private final int CRAFT_SIZE = 20; private String craft = "C:\\Users\\Jimmy\\Desktop\\Jimmy's Folder\\programs\\craft.png"; public Craft() { ImageIcon ii = new ImageIcon(craft); image2 = ii.getImage(); missiles = new ArrayList(); x = 40; y = 60; } public void move() { x += dx; y += dy; } public int getX() { return x; } public int getY() { return y; } public Image getImage() { return image; } public ArrayList getMissiles() { return missiles; } public void keyPressed(KeyEvent e) { int key = e.getKeyCode(); // Shooting key if (key == KeyEvent.VK_SPACE) { fire(); } if (key == KeyEvent.VK_LEFT) { dx = -1; } if (key == KeyEvent.VK_RIGHT) { dx = 1; } if (key == KeyEvent.VK_UP) { dy = -1; } if (key == KeyEvent.VK_DOWN) { dy = 1; } } // Handles the missile object firing out of the ship public void fire() { missiles.add(new Missile(x + CRAFT_SIZE, y + CRAFT_SIZE/2)); } public void keyReleased(KeyEvent e) { int key = e.getKeyCode(); if (key == KeyEvent.VK_LEFT) { dx = 0; } if (key == KeyEvent.VK_RIGHT) { dx = 0; } if (key == KeyEvent.VK_UP) { dy = 0; } if (key == KeyEvent.VK_DOWN) { dy = 0; } } }

  Read the article

• System freezes while not in use, how do I fix this?

  - by PHLAK

  Bare with me, the following is a bit winded. I have Ubuntu 10.10 Desktop 64-bit installed on my laptop and up until a few weeks ago it has been running great. Then one day, while I was not using the laptop it froze. I was logged in as my user but had locked the screen locked and closed the lid. I didn't notice that it had frozen until I opened the lid and wiggled the mouse to try and log in. The screen remained black and I got no response. I immediately tried Alt + F2, F3, F4, etc. but got no response. The only thing I could do was hold the power button to power off the machine. The freezing has happened as quickly as within 10-20 minutes of the system being logged off and lid closed and as long as 4-6 hours. My machine is NOT configured to go into standby when plugged in and this has happened both on AC power and battery. Troubleshooting I have performed: I uninstalled programs I knew that I had installed between when it was working fine and having problems. Those programs were CrashPlan, Shutter and Conky. After uninstalling ALL of these programs the freezing still occurs. Next, I decided to SSH into the machine from my desktop and leave an htop and tail of the syslog running. Here are screenshots of the last thing shown on both when the system froze: htop, syslog Here is a dump of my syslog after another freeze. The freeze happened at 9:14 and I didn't notice it until about 10 minutes later and rebooted, hence the 10 minute gap from 9:14 to 9:24. In the above syslog dump I noticed a lot of NVRM: os_raise_smp_barrier(), invalid context! and upon investigating that message learned it was from the proprietary Nvidia driver I had installed. Thinking this could be part of the problem I uninstalled the Nvidia driver and reverted to using the Nouveau driver. The computer still froze after a few hours. Lastly, thinking the problem could be caused by overheating I used compressed air to blow out any dust in the CPU vents and all other openings on the laptop. None of the above troubleshooting has helped and the freezing still occurs. What other steps can I take to troubleshoot and/or fix this problem? Note: Yesterday X started to eat up a lot of CPU power and eventually froze my system while I was forwarding an X session over SSH (from another PC to my laptop). I'm unsure if this is related or not as it doesn't match any of the symptoms of the problem above. Aside from this, the system has never frozen while in use, even under heavy load. EDIT: I just ran Memtest86+ and it made it through two passes without any errors. Just eliminating possible causes here.

  Read the article

• why are my players drawn to the side of my viewport

  - by Jetbuster

  Following this admittedly brilliant and clean 2d camera class I have a camera on each player, and it works for multiplayer and i've divided the screen into two sections for split screen by giving each camera a viewport. However in the game it looks like this I'm not sure if thats their position relative to the screen or what The relevant gameScreen code, the makePlayers is setup so it could theoretically work for up to 4 players private void makePlayers() { int rowCount = 1; if (NumberOfPlayers > 2) rowCount = 2; players = new Player[NumberOfPlayers]; for (int i = 0; i < players.Length; i++) { int xSize = GameRef.Window.ClientBounds.Width / 2; int ySize = GameRef.Window.ClientBounds.Height / rowCount; int col = i % rowCount; int row = i / rowCount; int xPoint = 0 + xSize * row; int yPoint = 0 + ySize * col; Viewport viewport = new Viewport(xPoint, yPoint, xSize, ySize); Vector2 playerPosition = new Vector2(viewport.TitleSafeArea.X + viewport.TitleSafeArea.Width / 2, viewport.TitleSafeArea.Y + viewport.TitleSafeArea.Height / 2); players[i] = new Player(playerPosition, playerSprites[i], GameRef, viewport); } //players[1].Keyboard = true; } public override void Draw(GameTime gameTime) { base.Draw(gameTime); foreach (Player player in players) { GraphicsDevice.Viewport = player.PlayerCamera.ViewPort; GameRef.spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.PointClamp, null, null, null, player.PlayerCamera.Transform); map.Draw(GameRef.spriteBatch); // Draw the Player player.Draw(GameRef.spriteBatch); // Draw UI screen elements GraphicsDevice.Viewport = Viewport; ControlManager.Draw(GameRef.spriteBatch); GameRef.spriteBatch.End(); } } the player's initialize and draw methods are like so internal void Initialize() { this.score = 0; this.angle = (float)(Math.PI * 0 / 180);//Start sprite at it's default rotation int width = utils.scaleInt(picture.Width, imageScale); int height = utils.scaleInt(picture.Height, imageScale); this.hitBox = new HitBox(new Vector2(centerPos.X - width / 2, centerPos.Y - height / 2), width, height, Color.Black, game.Window.ClientBounds); playerCamera.Initialize(); } #region Methods public void Draw(SpriteBatch spriteBatch) { //Console.WriteLine("Hitbox: X({0}),Y({1})", hitBox.Points[0].X, hitBox.Points[0].Y); //Console.WriteLine("Image: X({0}),Y({1})", centerPos.X, centerPos.Y); Vector2 orgin = new Vector2(picture.Width / 2, picture.Height / 2); hitBox.Draw(spriteBatch); utils.DrawCrosshair(spriteBatch, Position, game.Window.ClientBounds, Color.Red); spriteBatch.Draw(picture, Position, null, Color.White, angle, orgin, imageScale, SpriteEffects.None, 0.1f); } as I said I think I'm gonna need to do something with the render position but I'm to entirely sure what or how it would be elegant to say the least

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >