Search Results

Search found 5830 results on 234 pages for 'dr casper black'.

Page 184/234 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

  • Problem booting virtual machine after converting VMDK to VHD

    - by vg1890
    I used the VMWare VCenter Converter Standalone Client to convert a physical drive on my old PC to a virtual drive. The conversion worked fine and I ended up with a valid VMDK file. Next, I wanted to convert the VMDK to a VHD for use with Microsoft Virtual PC, since that's what I use on my new box. I used WinImage for the conversion and that worked fine, too. I can access the files from the virtual drive through WinImage. However, when I create a new virtual machine using Virtual PC and add the existing VHD file, the machine doesn't boot. The initial boot screen flashes with the amount of RAM and then the screen goes black. If I turn off the VM and reboot in safe mode I can see the drivers being loaded until eventually it gets to crcdisk.sys and hangs indefinitely. Any ideas how to fix this? I'm not opposed to starting over from scratch if there's another method to turn my physical machine into a Virtual PC VM. Thanks! EDIT - I should add that the virtual drive is a system boot drive and not a secondary drive. EDIT - I tried booting from the install CD and doing a repair. The result was that the system could not be repaired due to a "driver error."

    Read the article

  • Audio Static/Interference regardless of audio interface?

    - by Tom
    I currently am running a media center/server on a Lubuntu machine. The machine specs: Core 2 Duo Extreme EVGA SLI 680i MotherBoard 2 GB DDR2 Ram 3 Hard Drives no raid - WD Caviar Black, Green, and Samsung Spinpoint Galaxy GTX 220 1GB External USB Creative XI-FI Extreme Card 550W Power Supply This machine is hooked up through an optical cable to an ONKYO HTR340 Receiver through the XIFI card. Whenever I play any audio regardless if it is through XBMC, the default audio player, a flash video, etc, I get a horrible static sound that randomly gets louder. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 This static comes in randomly, sometimes going away for short periods, but eventually always comes back. So far I have tried everything I could think of: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Pretty much everything short of swapping the CPU. I haven't been able to narrow down the problem and it is getting frustrating. Is it possible that the CPU is faulty and might cause a problem such as this, or that the PC case is shorting out the motherboard? Any kind of suggestions will be appreciated.

    Read the article

  • SSH Tunnel for Remote Desktop via Intermediary Server Part II

    - by Mihai Todor
    I asked previously how to configure 2 SSH tunnels using an intermediary server in order to run Remote Desktop through them and I managed to make it work. Now, I'm trying to do the same, using the same machines, but in reverse order. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, on which I wish to do Remote Desktop from the PC. I use Putty on the laptop to create a reverse tunnel from it to the Linux server: R60666 localhost:3389. I use Putty on the PC to create a regular tunnel from it to the Linux server: L60666 localhost:60666. I SSH to the Linux sever and I run telnet localhost 60666 and it seems to produce the expected output, as described in the debugging tips that I received here. I try to connect Remote Desktop from the PC to the laptop: localhost:60666. It asks for my username and password, I click OK and it locks my current session on the laptop (so I see the welcome screen on the laptop instead of my desktop), it shows the "Welcome" message in the Remote Desktop screen and then it just goes black. It doesn't disconnect, it doesn't provide any error and I'm not able to perform any actions in the Remote Desktop screen. I tried the same setup with a Windows XP laptop and I'm experiencing the same symptoms. I also tried to use different ports than 60666, but nothing changed. Does anybody have any idea what I'm doing wrong? Update: As pointed out by @jwinders, I'm not able to run telnet PC 3389 from the Linux server directly. Since Windows Firewall has a rule to allow all connections on port 3389, I have no idea what is blocking it. Fortunately, I'm able to create a SSH tunnel from the Linux machine to the PC ssh 3389:localhost:3389 'domain\user'@PC.

    Read the article

  • Windows NT from vmware to kvm

    - by Luca Rossi
    I'm trying to convert a couple of old Windows NT virtual servers from vmware to KVM. I tried almost all guidelines and how to I found around the web but with no luck. I have the vmware virtual disk: Dlc1.vmdk partitioned image. I converted the vmdk into qcow2 image with the qemu utility and I tried to use it with kvm: kvm -hda test.qemu -vnc :1 -m 750 but I receive "error loading operating system" I also tried with raw partitions I can mount through losetup and kpartx. but nothing changed I also tried to create an brand new image file with: qemu-img create -f qcow2 test.qcow2 2G I partitioned the new image file and I copied the original partition 1 to the new partition 1 with dd: dd if=/dev/mapper/loop1p1 of=/dev/mapper/loop0p1 bs=128M no luck again I also tried with a single unpartitioned file: qemu-img create -f qcow2 test.qcow2 2G and I copied the partition 1 to the new image file: dd if=/dev/mapper/loop0p1 of=test.img bs=128M but when booting, I receive a black screen and the virtual machine hangs. The bootloader is loaded successfully, because I also tried with a GRUB live iso and I receive the same screens and errors. Note that grub sees the Windows setup and give me the boot choice. I have the suspect the problem is that the vmware machine is probably a scsi guest and in centos 6 (my system) scsi emulation is no longer supported. But in that case, where to change in Windows? I'm not so skilled with MS systems. Thank you for the help Luca Rossi

    Read the article

  • ATI radeon graphics card and screen freeze problem

    - by Thomas
    recently i upgrade my machine with new hardware component. my mother board is Gigabyte, processor Intel i3 3.6 ghz, ram 4 gb, graphics card ATI radeon 4350 1 GB. my OS installed is windows XP. when i am trying to play call of duty black ops then screen gets freeze and when i try to play other game like medal of honour then suddenly game closed suddenly after 15 or 20 minutes. i am not being able to find out the problem. whether i have problem in RAM or Graphics card. i asked few hardware person and one of them told me that i should installed windows 7 rather than windows xp. is it true. please help me to understand the problem and also tell me what should i do to fix this problem. please discuss in detail. thanks in advance. Update: yes i already install lates driver for ATI radeon 4350 but still the problem persist. do i need to install windows 7 instead of win xp because my processor is intel i3.

    Read the article

  • Building new computer, turns on, but no post

    - by addybojangles
    Pardon my ignorance here, finally decided to put together a computer and egads. I purchased a new motherboard, power supply, processor, video card and memory. ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ (originally had links for you guys, but I lack the rep, sorry!!) And I've got it all in the tower. I put in power supply, installed processor on motherboard, installed heatsink, put in ram, and I am using an older IDE hard disk. When I start the computer, the monitor tells me "check signal cable." As far as I can tell, the heatsink on the processor is spinning, the power supply is on (obviously), and the green LED on the motherboard is on. I originally only had the bigger output plugged in to the motherboard (what I saw in a YouTube vid as well as the mobo instructions), but after doing some research, it said plug in the other ATX power supply. Which I did. And trying to power the computer results in nothing. No beeps on startup, no post, anyone have any ideas? Your ideas and help is greatly appreciated.

    Read the article

  • GRUB doesn't recognize partitions on one harddisk

    - by knizz
    I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

    Read the article

  • Are these computer parts compatible?

    - by Jcubed
    so I'm building a computer and i want to know if all these parts are compatible. case: http://www.amazon.com/Xion-Gaming-Steel-Tower-Computer/dp/B002139YSS/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270923001&sr=8-1 power supply: http://www.amazon.com/Thermaltake-W0121RU-PurePower-Version-PCI-Express/dp/B0015MCMRG/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924656&sr=1-1 motherboard: http://www.amazon.com/GIGABYTE-GA-EP45-UD3P-LGA-Intel-Motherboard/dp/tech-data/B001HH2WE2/ref=de_a_smtd processor: http://www.amazon.com/Intel-Processor-1333MHz-LGA775-BX80570E8400/dp/B00116SLYY/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924524&sr=1-1 hard drive: http://www.amazon.com/Western-Digital-Caviar-Black-WD1001FALS/dp/B001C271MA/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924586&sr=8-1 DVD/Blu Ray Dive: http://www.amazon.com/LITE-Blu-ray-Internal-Optical-iHOS104/dp/tech-data/B002EE996Q/ref=de_a_smtd Graphics Card: http://www.amazon.com/Sapphire-Radeon-100252HDMI-PCI-Express-Graphics/dp/B001SJLLTQ/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924798&sr=1-1-spell Sound Card: http://www.amazon.com/Creative-Labs-SB0570L4-Blaster-Audigy/dp/B000LP0R3E/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924850&sr=1-1 Memory: http://www.amazon.com/Corsair-TWIN2X4096-8500C5DF-Dominator-PC2-8500-1066MHz/dp/B0014Z0Q04/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924896&sr=1-1-spell OS: Ubuntu 64-bit

    Read the article

  • Installing ubuntu 12.04, installs but does not boot after it asks me to remove the CD

    - by Randnum
    I'm Trying to install Ubuntu 12.04 on my computer. It had an old copy of Windows 7 on it I tried to reformat the hard drive for a fresh install of Ubuntu but I think I messed up the partitions in some way that prevents it from fully loading. I'm able to complete the install fine and use guided partitioning so it should be happy but when it gets about 90% through at the part that ejects the cd and restarts the system it fails. After ejecting the CD and restarting it just loads up the bios lenovo splash screen then purple then black. I can hear a sound from my speakers like some notification sound but there is no text on my screen. I've since gone back in under Rescue System to try and reconfigure the partitions hoping that it will fix it and i've tried several combinations. Currently it's SCST1 (0,0,0) (sda) - 500.1 GB ATA WDC WD5000AAkKX-0 #1 100.0 MB K biosgrub #2 494.1 GB B K ext4 / #3 5.9 GB F swap swap 8.2 kb FREE SPACE I'm not sure if I need to set the ext4 to contain the boot flag but if I don't include at least one partition with the boot flag enabled it complains saying that "The partition table format in use on your disks normally requires you to create a separate partition for boot loader code. This partitionshould be marked for use as an "EFI boot Partition" and should be at least 35 MB in size. Note that this is not hte same as a partition mounted on /boot" Like I said it seems to have installed all of the actual data from the CD it's just not properly booting for some reason

    Read the article

  • "A disk read error occurred" when booting XP disk image in VirtualBox

    - by intuited
    I'm trying to boot an XP installation cloned into VirtualBox from a real drive. I'm getting the message A disk read error occurred Press Ctrl+Alt+Del to restart whenever* I try to boot the machine. * This is not strictly true: with AMD-V enabled, the boot process appears to not make it this far and instead hangs at a black screen with cursor. I created the VirtualBox image from the original drive using the following method: $ sudo ddrescue -n /dev/sdd sdd.img logfile # completed without errors $ VBoxManage convertfromraw sdd.img disk.vdi The original disk (and the image) contain a single NTFS partition with XP installed on it. The owner of the drive indicates that it did boot okay the last time the system made it that far. The (Pentium 4) system has a broken (enormous) heat sink, so at some point it failed to boot because it would quickly overheat and shut down. If I boot the VM from a live cd, I am able to mount its /dev/sda1 without any problems. I ran ntfsfix and didn't have any luck. I've read through the instructions on doing this. I didn't really follow them. For example, I didn't run MergeIDE before imaging because the machine was not bootable. However, the symptom of that problem seems to be quite different. The emitted message is contained in the volume boot record of the XP partition, which leads me to suspect that this is a problem with the core operating system bootstrap procedure, and not related to anything in the registry. I don't have an XP boot CD.

    Read the article

  • Computer speakers receive radio station signal

    - by squircle
    I have a set of Logitech 5.1 speakers where each speaker and the source plug into the subwoofer. I'm using a Griffin Firewave with output from my MacBook Pro, and output from my custom-built desktop with a switch in the middle (built it myself out of an old Belkin A/B parallel switch). Recently, I've noticed that I can hear a local Punjabi radio station being picked up by my speakers, and the volume of this interference increases as I increase the volume of the speakers. I'm fairly sure that this radio station is at the low-end of the FM spectrum, below 90MHz (or it may be at the high end, above 105MHz, my memory isn't infallible). It gets quite annoying as I can't put my audio very loud without the interference. I've tried to put a ferrite core on the input cable just before the 3.5mm jacks plug into the subwoofer. I don't know if putting the same core around all three of the cables (green, black, orange) would negate the effects, but I'm assuming not. There has been no change. Is there any reason why this would be happening? I'm assuming the interference is coming somewhere between the FireWave and the subwoofer, because the noise gets amplified with volume increases. If anybody has any suggestions, I'd be grateful!

    Read the article

  • How to bypass resume from hibernate

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • Reboot fails with "Invalid partition"

    - by Mike Clark
    My laptop can't reboot. Any time something restarts the laptop (e.g. to apply Windows updates, or Start Menu-Restart, etc), the computer sits at a black screen with the message "Invalid partition" displayed in console text. When this happens, I power off the computer, then power it back on, and it boots up fine. OK, now the history behind this: This laptop is a new Dell. The day I got it, I used gparted to reclaim 30 GB of disk space that had been allocated to a "recovery partition" in the middle of the laptop's primary drive. (I have DVDs for recovery and I didn't want to waste 30 GB of SSD space on recovery data.) So I used gparted to delete the recovery partition and resize the primary Windows partition to use up the new free space. As expected when resizing a boot partition, the computer would no longer boot. I used Windows Recovery Console to fix the boot process: FIXMBR C: FIXBOOT C: BOOTCFG /rebuild This worked fine and the computer boots up fine. But, as mentioned earlier, the laptop still can't reboot. Any idea on how to fix this without completely reformatting the disk and reinstalling Windows from scratch? It's Windows 7.

    Read the article

  • Can I have a single solid state drive and a RAID array on the same machine?

    - by jaminto
    Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

    Read the article

  • Troubleshooting Mid 2007 iMac RAM upgrade

    - by MDT
    I am trying to install new RAM in my friends iMac, something I have done several times before. We unplugged the computer before performing the upgrade, used anti static wrist bands, and yes the memory is compatible and inserted correctly. The stock RAM was Hynix 1gb pc2-5300s-555-12 and the memory we are replacing it with is 2x2gb Centon CMP800SO2048.01. Now I know this model number suggests that the ram is 800MHz and the iMac is only 667MHz but it clearly states on the box that this RAM is PC2-5300 667MHz compatible. The problem is, that when I install the new RAM I get little response from the computer. I hear the hard drive and disk drive start to initialize, but then they just stop and the screen remains black. I have tried every variation of the new RAM and the old RAM in both slots and even tried the same RAM from my old iMac and I just can't get it to boot. Has anyone ever had a problem like this? Thank you in advance for any and all input on thus issue!

    Read the article

  • GNOME 2 + Compiz equivalent?

    - by virtualeyes
    Running Fedora 14 and realize I need to either change distros or find an alternative to GNOME 3 in Fedora 17. Based on what I have read to-date, XFCE and KDE are the go-to WMs if I want to avoid GNOME 3. I tried KDE 4 and I wasn't impressed; I like the simplicity of GNOME 2 with Compiz and Emerald. Can't stay on Fedora 14 forever, however, so...where to turn? Basically looking for these features in my desktop environment: GNOME Do or equivalent Snap to grid/Window tiling A must-have, the ability to hot key focused window to a monitor grid region is a huge productivity win. Zoom window to cursor In a multi-monitor setup sometimes it's nice to, say, GNOME Do terminal in one monitor and then hot key the opened window to the other monitor just by zipping the mouse cursor anywhere on target monitor (followed by, of course, snap-to-grid hotkey, all without a single mouse click) Polarization At night white background hurts the eyes, so I prefer to hot key polarize to black. Multi-monitor support I'm partial to Fedora given that I've worked with CentOS for years and have little experience with any other Linux distro; however, if the difference between Fedora and Arch, Mint, etc. is fairly subtle, I'll make the leap, just need a distro & desktop environment that allows me to be productive with keyboard hot keys and provides the above basic features. Any suggestions?

    Read the article

  • Intel Rapid Storage Technology (pre-OS) driver installation

    - by Nero theZero
    My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

    Read the article

  • does my machine configuration make sense?

    - by user1227914
    i couldn't think of a better place to ask this question, so here it goes. we're putting together a dedicated server for a website that will initially host the web server and the mysql database. as the website grows, we'll move the database to a different server and this machine will eventually only server the actual website. so the question is ...does my configuration look okay? it's the first time i'm building a server from scratch so i want to make sure i don't combine components that don't fit or something. things like ..do the drives i picked work for the hot swap ..etc. what do you guys think? am i good to go with this configuration? :) Chassis: Supermicro SuperServer 6016T-MTHF (6x DDR3 SDRAM - ECC DIMM 240-pin, 2x LGA1366 Socket, Power Provided: 600 Watt, 4 (free) x hot-swap - 3.5") CPU: Intel BX80614E5620 Xeon E5620 Processor - 4 Core, 2.40GHz, LGA 1366, 5.86GT/s QPI 12MB Cache, 64-Bit, 80W, HyperThreading Memory: Crucial CT51272BB1339 4GB PC10600 DDR3 Memory - 1333MHz, ECC, Registered, 1x4096MB (possibly 3 or 4 of them) Hard Drives: Western Digital WD2002FAEX Caviar Black Hard Drive - 2TB, 3.5", SATA 6Gbps, 7200 RPM, 64MB (possibly 2 or 3). thank you very much for any professional advice :)

    Read the article

  • Toshiba Satellite U500 - Totally Damaged LCD

    - by ivan
    I accidentally damaged my Toshiba Satellite U500 laptop which resulted in a totally unusable LCD. The LCD panel has some cracks on it, and I can only see black & white spots; the laptop frame became broken/bent to where I can partially see inside the PC; the accident disassembled the CD tray, and bent the keyboard frame (which now has a weird hump). The system is still working though. It responds to my inputs (eg, turning it on/off, typing my password @ Windows Login, etc). What I want to do now is to transfer all of my important data from that laptop to my external drive. But I don't know how since the LCD screen is unreadable. I know I can connect it to an external monitor or a TV (I have a Samsung 1080p TV) but I don't know how. What cable should I purchase to connect the TV? Which ports on the laptop and TV should I connect it to? Do I need press something while/after connecting it? Can I boot my laptop using the TV?

    Read the article

  • Cannot Install Bootcamp on Mac Fusion Drive

    - by user3377019
    I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

    Read the article

  • XTerm and a bold text

    - by user610378
    This is my Xterm config: XTerm*saveLines: 512 XTerm*reverseVideo: false XTerm*reverseWrap: true XTerm*fullCursor: true XTerm*scrollTtyOutput: on XTerm*scrollKey: on XTerm*eightBitInput: false XTerm*pointerColor: white XTerm*pointerShape: left_ptr XTerm*charClass: 37:48,45-47:48,58:48,64:48,126:48 XTerm*cursorColor: rgb:aa/aa/aa XTerm*cursorColor2: black XTerm*color0: rgb:71/71/71 XTerm*color1: rgb:cd/00/00 XTerm*color2: rgb:b4/cd/00 XTerm*color3: rgb:cd/cd/00 XTerm*color4: rgb:71/71/71 XTerm*color5: rgb:cd/00/cd XTerm*color6: rgb:00/cd/cd XTerm*color7: rgb:e5/e5/e5 XTerm*color8: rgb:4c/4c/4c XTerm*color9: rgb:ff/00/00 XTerm*color10: rgb:55/ac/55 XTerm*color11: rgb:ff/ff/00 XTerm*color12: rgb:46/82/b4 XTerm*color13: rgb:ff/00/ff XTerm*color14: rgb:00/ff/ff XTerm*color15: rgb:ff/ff/ff XTerm*colorBD: white XTerm*colorUL: SkyBlue XTerm*colorBDMode: on XTerm*colorULMode: on XTerm*underLine: on XTerm*background: rgb:30/0a/24 XTerm*foreground: white XTerm*font: -*-monospace-medium-r-normal-9-140-*-*-m-*-* XTerm*font1: 5x7 XTerm*font2: 6x10 XTerm*font3: fixed XTerm*font4: 9x15 XTerm*ScrollBar.Background: gray XTerm*ScrollBar.thickness: 0 XTerm*ScrollBar.foreground: gray XTerm*ScrollBar: false XTerm*ScrollBar.DrawBorder: false XTerm*loginShell: true XTerm*faceName: Mono XTerm*faceSize: 9 Could anyone say is it possible to make bold some text, wich color is e.g. color1 from my config? I've tried XTerm*color1: rgb:cd/00/00 bold, but this doesn't work.

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • Graphics and USB devices freezing soon after OS loads

    - by Andrew
    I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

    Read the article

  • Proper 16:9 video size for non-HD 4:3 video (for youtube/vimeo)

    - by Xeoncross
    Since High Definition video came out on all the online sites it has changed the default aspect ratio of the player from 4:3 to 16:9. This means that for people posting SD video you have to resize some of your videos to get them to fit right. For example, NTSC DVD quality (aka 480i/p) is 720x480 pixels (width x height). However, low-end High Definition (720i/p) is 1280x720. Resolution Chart Anyway, now that the video players are built for HD you will find that uploading standard quality videos will result in videos that are "letter boxed" which means they have extra black bars on the top and bottom (or sides). Correct me if I'm wrong, but in order to get a 720x480 video to fit a box that is designed for HD the best practice would be to crop some of it off so that it fits as 720x404 since: 16/9 = 1.78 (1.7777777777778) 720/405 = 1.78 405x1.78 = 720.9 The same would stand for 640x480 (old TV quality) video that would need to be 640x360 correct? I'm asking because I'm not sure about all this and whether this is the proper way to fix these letter-boxing/display problems.

    Read the article

  • Windows 3 Animated Background/Desktop/Wallpaper

    - by Synetech
    In the summer of 1995, I visited some family in Los Angeles. My uncle had a computer with Windows 3 (or some version thereof since Windows 95 had not been released yet). In Windows 3, there was no desktop or wallpaper like in later versions; instead you could set it to a simple pattern (still possible in later versions before XP) like hounds-tooth or bricks (interestingly, there seems to be next to nothing available on the Internet about this anymore; no screenshots and almost no pages). I recall being amused when I found a program (on the still young “world-wide web”) that would actually let you set an animated background. It was smooth and fluid and was quite an amazing thing at the time. If I recall correctly, it had several built-in animations including one of a light-orange-pink background over which storks flew towards the top-left, possibly with some light stuff floating in the “background” (they were actually animated and flapped their wings, not simply translated coordinates). The storks were somewhat simplified, black-line drawings. Over the years, I’ve tried finding it again a few times but never could. Worse, it’s become harder and harder over time as new programs came out and polluted the search results. I’m hoping that someone remembers this software and knows some useful information like the author or where to download it. (No, it’s not ScreenPaper. That was created in 1997 to let you set a screensaver as the Windows 95/NT4 background. This was at least two years earlier for Windows 3 and I’m almost certain it had these animations built-in—I don’t recall any stork screensavers for Windows 3.)

    Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >