Search Results

Search found 7044 results on 282 pages for 'monitor stand'.

Page 182/282 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Enable CPU fan always on

  - by Gundars Meness

  I am using 3 years old overheating laptop and I want my CPU fan to be spinning 24/7 regardless of the consequences. How to make it spin? The problem is that CPU & GPU heats up to 68°C (154 F) right after boot and never goes down, because CPU fan is not spinning full throttle. It starts spinning faster when temperature goes over 70°C and stops when it reaches seventy again. When doing heavy work on databases, it gets from 70 to 90 in no-time and automatically powers off. Bios does not contain any "fan spin 100%" options, just "spin slowly all the time" and "auto" which is more useless than the first one since my fan doesn't have pwm wire. Currently I'm solving this with cooling stand (3x5V), but it isn't much of a help. I would rather use the CPU fan since it is the only fan directly responsible for cooling down CPU/GPU. But how to make it spin 100% all the time? Should I attach it's red power wire to motherboard to get constant 5V (is there such option?), or is there an option to control it via software? Laptop: Samsung R528 2.3 GHz Intel i3 with Nvidia GeForce 310M Bios: Phoenix 03KT.M003.20100622.KSJ (and that is latest update) OS: Ubuntu 12.04.2 LTS with 3.2.0.51 kernel CPU fan: Image/Description Has 5V 0,4A and only 3 pins, no pwm. P.S. Yes, I did clean everything with alcohol, freed the air vents, changed thermal paste etc; that reduced temperature by 4 degrees.

  Read the article

• Good option for a transparent internet gateway on Mac OS X

  - by Gareth

  Hi I have a small network of Mac systems, and would like to add some internal monitoring of our internet usage, which has recently begun to climb. I would like to configure one of the machines as an internet gateway, and install some monitoring software that could provide graph indications of network usage by machine. The machine would then double as a workstation and as the internet gateway. I can manually configure the machines on the network to use it as a gateway, and would prefer to avoid an explicit http proxy (although it is an option if necessary). What software would serverfault users recommend to provide simple, easily configurable and maintainable network monitoring on Mac OS 10.5.7 (non-server)? The simplest requirement is monitor usage by IP Address, but additional tracking (e.g. destination, protocol, etc) would be useful.

  Read the article

• How do you prevent the dock from switching monitors in OSX Mavericks?

  - by Brad Dwyer

  In Mavericks, Apple introduced a "feature" where if you hover at the bottom of any screen the dock pops up on that screen. This is disrupting my workflow as I am constantly having the dock pop up when I don't want it to and then I have to go to another window and hover at the bottom for several seconds to get it to go away so I can click on what I was trying to in the first place. I don't want the dock to move; I want it to stay on the bottom of my right-most monitor like it always has. How can I adjust this in OSX Mavericks?

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Windows screen shots via command-line SSH session

  - by Geoff Fritz

  I've browsed the handful of "screen capture" queries here, but I was unable to find anything which addressed my specific need. I'm looking for a command-line tool that I can run via remote SSH connection (by way of the cygwin sshd daemon). There are several to choose from, but the few I've tried (ImageMagick, nircmd, and MiniCap) all result in a blank screen. I assume that this is due to the remotely logged in user not having a proper graphical console session running. The goal here is automate screen capture and retrieval of the main system console (what one would see if they were looking at the physical monitor) through the use of ssh script from a Unix host: ssh user@windowshost "screencap --output /tmp/console.jpg" scp user@windowshost:/tmp/console.jpg /some/destdir Note that these must be done on demand, so polling a remote directory that has snapshots dumped periodically will not work. Bonus points for programs that are open source and have a portable install (so I don't need to RDP/VNC into the machine to run a graphical installer).

  Read the article

• SNMPD - passing values in a trap

  - by ethrbunny

  Im trying to create an SNMP setup to monitor 500-1K machines. Each will be joined to the SNMPTRAPD server via a VPN. When the client system sends its messages, it's sending its internal address instead of the VPN address even though the 'trapsync' command is using the VPN. This will be a problem as many of these system will have DHCP addresses based on location so there will be overlap. What I'd like to figure out is how to pass extra values with the trap so I can identify which system a given trap comes from.

  Read the article

• application monitoring tools

  - by Shachar

  we're an ISV about to deploy our SaaS application over the internet to our end users, and are currently looking for an application monitoring solution. In addition to monitoring the usual OS-level suspects (I/O, disk space, logs, CPU, RAM, swapping, etc.), we're also looking to monitor, alert and report on internal application events, conditions, and counters (think queue size for internal service, or latency of a service we're getting from a third party via custom APIs). We're started looking at Nagios, Zenoss, etc., but found out those do only low-level stuff, and are currently looking at MOM and ManageEngine. Still, they are far from being an custom app monitoring tool. So - do you have anything to suggest?

  Read the article

• What was your most expensive computer rig?

  - by AlbertoPL

  I'm curious as to how much people are willing to spend on a typical computer. My most expensive machine is a gaming rig complete with an ATI Radeon HD4850, Wolfdale 3.0 GHZ Intel Core 2 Duo, 500 Gb hard drive, Antec 900 computer case, the works. I also have a 2-monitor set up. I'd have to say this thing has cost me a little more than a grand at this point, and I'd put the total value of the components at roughly $1300. So, how far have you gone with your computer rigs and has it been worth it?

  Read the article

• Sharepoint Services 3.0: 403 Forbidden fun

  - by gravyface

  Can't get to the Administration or the "companyweb" site itself; was working up to a week ago. Old threads, blog posts, etc. indicate that there was an issue with a KB update but was resolved when .NET Framework 2.0 SP1 was deployed/installed. Running Process Monitor, I can see a lot of PATH NOT FOUND','NAME NOT FOUND for c:\inetpub\companyweb\Default.aspx, \_themes\ice\...\foo.css, etc. for the w3wp.exe process on CreateFileorQueryOpenoperations. These files do not exist in the location specified. I don't recall these files actually existing in that folder, but I believe they're "created" when requested, pulled in from Common Files/Shared or whatever, in typically-awesome Microsoft Web architecture land (</rant>). Besides reinstalling (which I'm sure will be as much fun as migrating from one server to another was), anyone know what's going on? Google-fu has alluded me.

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

  - by cnst

  Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

  Read the article

• monitoring nfs with monit

  - by Josh Nankin

  I'd like to monitor NFS mounts and the NFS server process using Monit. On the server, I'd need a PID file, but I can't seem to find a way of getting that created with existing configuration files. Is there a way to do this, or has anyone monitored the server in a different way (checking if port 53 is active, etc). On clients, I was thinking of making Monit simply look for a specific file in an NFS mount, and if it's accessible, all is well. Problem is, if the NFS server does go down, file requests usually hang (perhaps even indefinitely, not sure). How would one get around this issue with monit? Any configuration examples would be greatly appreciated!

  Read the article

• interesting uses for a headless host running Ubuntu.

  - by Manuel

  Hey! So, I have configured a pc with no monitor, keyboard or mouse running Ubuntu. I use it as a ssh server, file backup, web server, etc. Though, it seems as if I could use it for sooo much more. The problem is I can't think of many more uses. What interesting uses of a headless host have you heard of? Is there a cool trick you want to share? Thanks! Manuel

  Read the article

• How can I stop my laptop display from flickering when I connect my TV?

  - by Lord Torgamus

  I have a laptop with an HDMI output port running Vista, and an HDTV with HDMI input ports. The laptop is set to extend its desktop onto a second monitor. When I connect the computer to the TV with an HDMI cable, my laptop screen usually flickers rapidly. Most of the time it lasts for about 30 seconds, but sometimes it lasts for several minutes and once in a while it doesn't happen at all. It wouldn't be so bad except that the cursor moves back to the center of the laptop screen with each flicker, so I can't really do anything until the machine decides it's ready to calm down. I haven't been able to find any pattern at all for the causes or duration of the flickering. It doesn't seem to matter what programs the laptop is running when I connect it to the TV, whether I enable the extended display before or after I connect the TV or which HDMI port/cable I use. What could be causing this, and how can I make it go away?

  Read the article

• Thomson TG585v7 router - promiscuous mode

  - by Nikita

  I have a TG585v7 as a router with several machines plugged into it. In the default setup, the packets are only delivered to the specific machine but I want to be able to setup to monitor all network traffic on one of the machines, i.e. I need those packets to be picked up when my ethernet card is in promiscuous mode. Is this possible? Guide here has this "mcastpromisc Make the IP interface multicast promiscuous. OPTIONAL", is this what I am looking for? Does it mean I need to manually add all my machines by their MAC addresses to be able to receive packets destined for them? Or am I out of luck and I need to get a better router?

  Read the article

• Why do SNMP agents need MIB files?

  - by user1495181

  After reading up on SNMP and some of the questions help here I think understand the agent role as a SNMP service to device (Like SQL, it is an API to storage). When you execute a SQL query the SQL engine does all the work and returns the result - You don't need to be aware of how the storage and where the storage is done. But MIBs are not actual storage , so what is the role of my agent? if the agent only register the MIB like i follow in this tutorial, is it not used as handler at all? Say that I want monitor my application's pending request queue, so I want an agent that all SNMP request for application_pending_request will be fired for it and it will return the queue depth. Why do I need to have an actual MIB when all I need to poll my application queue in order to get result?

  Read the article

• How to open embedded Visio files with only Visio Viewer?

  - by Christopher Galpin

  For some bizarre reason Visio Viewer seems incapable of opening vsd files when they're embedded within a (2010) Excel document: However if I open the Excel document with 7-zip, browse to xl\embeddings, extract oleObject1.bin and rename it to a .vsd file extension it opens perfectly fine with Visio Viewer in Internet Explorer. Since this opens fine on a computer with the full Visio installed, my guess is it's trying to launch Visio rather than IE. Is there something I can do to fix this? I've been scanning with Process Monitor and searching with RegScanner comparing a Visio-installed system to a VisioViewer-installed system and there doesn't actually seem to be any sort of registry value giving direction here... maybe it's just the nature of OLE. (If it can't be fixed I'm okay with converting the extracted one to a .png or so to replace the embedded object, but the "solutions" I've found for vsd to image conversion are very poor or non-working, i.e. buggy code, code with Visio dependencies, or online services.)

  Read the article

• How do I keep my Mac from constantly going to sleep?

  - by David

  The system is a PowerPC Mac Mini running MacOS Tiger 10.4.11. When I login (I'm the admin), everything seems fine - until about 10-15 minutes later. Then the system goes into sleep mode. Each time I try to wake the system up - I can barely log in before it goes to sleep again. Sometimes I don't have enough time to enter my password (from the screen saver). If I shut down and restart, then I have that 10-15 mins again - until it again goes to sleep. I checked the settings in the Displays and Energy System Prefs. I looked at Accounts and at Screen Saver System Prefs; no times seemed to be present. I've already reset the PROM and other things (as part of an earlier problem shooting session). If I don't log in at the desktop, things seem to be fine. Nothing in .profile, /etc/profile, or /etc/bashrc seems to stand out. Right now, the system is hardly usable; can someone help? Many thanks...

  Read the article

• How do I keep my Mac from constantly going to sleep?

  - by David

  The system is a PowerPC Mac Mini running MacOS Tiger 10.4.11. When I login (I'm the admin), everything seems fine - until about 10-15 minutes later. Then the system goes into sleep mode. Each time I try to wake the system up - I can barely log in before it goes to sleep again. Sometimes I don't have enough time to enter my password (from the screen saver). If I shut down and restart, then I have that 10-15 mins again - until it again goes to sleep. I checked the settings in the Displays and Energy System Prefs. I looked at Accounts and at Screen Saver System Prefs; no times seemed to be present. I've already reset the PROM and other things (as part of an earlier problem shooting session). If I don't log in at the desktop, things seem to be fine. Nothing in .profile, /etc/profile, or /etc/bashrc seems to stand out. Right now, the system is hardly usable; can someone help? Many thanks...

  Read the article

• sharing a folder between linux and windows over the internet

  - by valya

  Hello Currently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow. I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian. So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.

  Read the article

• Need Recommendations: Network Software and Hardware Setup for small firm

  - by Rogue

  Will be starting a small graphics design firm soon, with 20 employees. Therefore need software to manage the network. Have bought a bulk license of Windows 7. I have a spare computer which can act as a server if necessary, but its an ancient Dell machine (Pentium-III). If required I would purchase an extra machine, but would like to avoid unnecessary costs at start up. Following are the main functions that I would like to perform: Need to monitor\control network traffic and internet usage, restrict access to certain websites Alerts when access to certain software's, and when trying to tamper with privileges Ability to view desktops of any computer at any given time Limit access to certain hardware like USB ports,etc Limit access to folders on the computer Log/Report of all actions including keystrokes performed on any computer Local Network chat and talk client Collaboration and Work logs Any Software available to do all of the above and also any additional hardware required besides network switches, network card's and CAT5e cables. Any other recommendations besides the above mentioned hardware setup

  Read the article

• Saving a Word document as Web Page, Filtered drastically reduces image resolution

  - by Abdullah Jibaly

  I have a document with hundreds of images. When I save the first image (right click and save picture) it ends up with a good resolution as shown below: However, when I save the document as Web Page, Filtered, all the images end up really low-res. Here's the exact same image afterwards: I've tried the following options in the Save As dialog with no luck: In Tools > Web Options... > Pictures > Target Monitor I've set the Pixels Per Inch to the highest value, 120. In Tools > Compress Pictures > Target Output I've set it to Print (220 ppi). Any ideas would be appreciated.

  Read the article

• Power supply surges detected during previous power on

  - by Blastcore

  Message is this: "Power supply surges detected during previous power on" "ASUS Auto-Surge was triggered to protect system from unstable power supply" When i went to sleep yesterday and woke up, when i moved the mouse to go back from screen saver, it didn't do anything. So i left it, i came back from class and got this issue. (I didn't restart before going to class... So the screen was left like it was) Today there was a power cut in half of my house. (Computer is on the side that it didn't cut...) Voltages are fine, like always. How do i remove message? It's just maybe sensor glitch? Even disabling the Anti-Surge my PC "shuts down" (Only monitor, but maybe components do too.)

  Read the article

• How to set up the jdbc driver to connect to hsqldb from libreoffice?

  - by rumtscho

  I am trying to "split" a LibreOffice .odb file into a HSQL database and an OpenOffice document containing forms and macros. I am trying to follow the instructions from this thread: Within a few minutes you can convert your embedded HSQLDB to a stand-alone HSQLDB which is just a very fine database engine. 1) Download and extract the current version from http://hsqldb.org/ and point the Java class path in ToolsOptionsJava to the new hsqldb.jar 2) Extract the database folder from your embedded database and rename the files data, properties, script to name.data name.properties, name.script where "name." is an arbitrary name prefix. 3) Connect a Base document to an existing JDBC database such as jdbc:hsqldb:file:/home/chenier/hsqldb/name;default_schema=true;shutdown=true;hsqldb.default_table_type=cached;get_column_name=false (again, "name" refers to your own file name prefix). This local single-user connection gives you much more than the embedded HSQLDB. 4) Copy queries, forms and reports from the old database over to the new one. The wizard presents me with a window expecting two inputs: a "Datasource URL" and a "JDBC driver class". As far as I can tell, the tutorial above only tells me what to put into the Datasource URL. As for the JDBC driver class, I have no idea what to write into this field. I tried the fully-qualified name of the Java class, org.hsqldb.jdbc.JDBCDriver as given in the HSQLDB documentation. When that failed, I tried the physical path /var/lib/hsqldb/lib/hsqldb.jar (although that should have been unnecessary, because first I pointed to this path as described under 1 and then restarted LibreOffice). In both cases, "Test class" failed with the message "The JDBC driver could not be loaded". OpenOffice's documentation doesn't say anything sensible about the field, it was something like "enter the JDBC driver in this box". Any ideas what I should enter there to get the connection working?

  Read the article

• HP Probook 4530s great specs, but lagging. Hard Drive?

  - by Mark

  I have this laptop, which has a i3 processor, 4gb memory, 7200rpm hard drive. So there is nothing wrong with the specs. Even when I have no applications open, simply closing and opening windows, lags. Or opening the start menu, or dragging icons across the desktop. sometimes even the cursor lags. So I checked out the resource monitor, and the resources using disk activity are svchost Avast ------- my antivirus, but not much System (PID 4) ------ This is using a huge chunk The total disk activity fluctuates between %50 - %100

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >