Search Results

Search found 7044 results on 282 pages for 'monitor stand'.

Page 188/282 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Monitoring host and app parameters in real-time

  - by devopsdude42

  I have a bunch of VMs that I need to monitor in real-time. For all nodes I need to watch host parameters like load, network usage and free memory; and for some I need app-specific metrics too, like redis (some vars from the output of INFO command) and nginx (like requests/sec, avg. request time). Ideally I'd also like to track some parameters from the custom apps that run on these node too. These parameters should get tracked as a bunch of line charts on a dashboard. I checked out graphite and it looks suitable (although the UX and aesthetics looks like it needs some love). But setting up and maintaining graphite looks to be a pain, esp. since we don't have a full-time person just for this. Are there any alternatives? Or at least something that is simpler to setup and will scale? Reasonable paid services are also ok.

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• Large file copy from NFS to local disk performance drop

  - by Bernhard

  I'm trying to copy a 200GB file from an NFS mount to a local disk. The local disk is an XFS filesystem on a LVM on top of a RAID 5 system (hardware RAID controler). I'm using rsync to monitor the transfer speed. At the beginning the IO speed is about 200MB/s, stable for the first 18GB. But then the performance drops by a factor of 10-20 and never recovers to the initial rate. Sometimes it reaches about 50-100MB/s but just for a few seconds and then the process seems to hang for a bit. At the same time all file-stat operations on the target filesystem are blocking for a long time (minutes). Also interrupting the copy process blocks for several minutes, a sub-sequent delete of the partly copied file takes also several minutes. Any ideas what could be causing this?

  Read the article

• Getting Synergy+ to work with Windows 7 64bit and Windows XP 32bit?

  - by john crisp

  My Windows XP box is Dell 4550 dimension. Windows 7 box is Home Premium. Synergy + installs fine on the Windows 7box, but using Windows xp as the client, it won't work? Do I need to disconnect the vga connection from my monitor and control entirely from the win7 dvi connection? In setting up ( links ) on Windows 7 as the server, I have NO way of inputing info? The setup on the Windows xp box is simple and does so OK, but I can't connect to the Windows xp box! It must be the vga connection on the Windows XP box. In order to use both machines, I have to turn one off and the other on. Hence-the VGA is needed on Windows XP. Any info/help most appreciated.

  Read the article

• Reliability of S.M.A.R.T.?

  - by Mark

  I've been using ActiveSmart to monitor my hard-drives health for a few weeks now, and its telling me my brand new 1.5 TB hard-drive is half-dead already. About on-par with one of my hard-drives which I know is at least half dead because I've been having some read errors and heard ticking noises. Now I haven't actually noticed any problems with my 1.5 TB drive; should I be concerned that it's going to crap out on me too? Or could ActiveSmart be giving a mis-diagnosis because I use it a lot or something (I've used up 795 GB in the 2 and a half weeks I've had it). The events that ActiveSmart has been catching is "Hardware ECC recovered". Maybe these new fangled super big hard-drives somehow rely on ECCs to squeeze out the extra space, but this isn't actually a cause for concern?

  Read the article

• Rsync over NFS with QoS: How to view real transfer speed?

  - by Ian Mackinnon

  We have a bandwidth limit between a Linux server and a NAS, created using 'tc' with an IP filter. When writing to an NFS mount of the NAS, rsync claims a very high transfer speed for each file and then waits a long time before acknowledging that everything has finished. The total time taken is consistent with the QoS limit and the time taken by the same transfer over FTP. Why does the write to the NFS mount report higher transfer speeds than are actually happening over the network? How can I monitor the actual bandwidth of the transfer?

  Read the article

• Monitoring server room temperature

  - by user640

  I have a small server room with its own AC unit. Recently, the AC died, and the temperature increased from 70 F to 90 F. We rarely go in this room, so I was lucky that someone happened to notice that the fans were running a lot louder than normal as they walked past the door. It looks like I need a way to be notified when the temperature in that room gets too hot. What tools are you using to monitor the temperature in your server room? How does this tool notify you of a problem (email, SNMP, etc). Note: I've read this question on server temperature, but I'm interested in the whole room, not just the inside of a server case. Edit: Thanks for all the great responses so far! Many of these products measure much more than just temperature. What else should I be looking at and why?

  Read the article

• Very fast Laptop Heating due to very high CPU usage by dwm.exe

  - by Sushan Shrestha

  My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

  Read the article

• How to get started setting up IP security cameras

  - by dave

  I have just finished renovating my house. As part of the job, I have cat6 cable run through the house, including two external plugs. All cables terminate in the same location. My rough plan is to plug two IP cameras to monitor the front and rear, run POE from a central router to the two external cameras, plug my PC into the same router and run magic software X. Any machine plugged into the router or wirelessly connection should then be able to get a live feed and alerts based on motion detection. That's the plan, but I'm not sure how possible it is. What hardware to get and what monitoring software to get. Has anyone does something similar? What were your experiences?

  Read the article

• How to play from mic to speakers in Ubuntu Karmic?

  - by vava

  Ok, I have a silly problem. I have few bluetooth headsets lying around and I want to make DYI baby monitor out of them. All I need is for some application to listen to the mic and send it to the speakers. Loopback (even though it doesn't work) is not good enough, it'll send sound from the mic to the speakers in the same device but I need it to go across devices. So does anyone know some application that can do that? I'm looking for something small and easy to use, not jackd or similar.

  Read the article

• Office jukebox systems

  - by Jona

  We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

  Read the article

• ASUS EAH5770 CuCore problem: VLC Stutting!

  - by aiacet

  Hello to everyone and thank you in advance to all the people that will want help me. Like in the title my problem concernig this boring stutting when i play a Tv series episodes or a film on VLC whit my mew PC. Pc components are: AMD Phenom II X4 955 Black Box 125W Asus M4A785TD-M EVO Radeon HD5770 1GB GDDR5 Asus CoolerMaster GX 650W G.Skill 2x2GB PC3-12800 1600Mhz-787 4GBECO Western Digital 1TB SATAII 64MB Monitor are SyncMaster 920Nw OS: Windows XP 32 bit Display adapter drivers are updates at the latest release (catalyst 10.4) and also the ATi Vga bios are updated Besides when i play the same episode with DivX Plus Player i have video and audio stutting. I can play very well Dragon Age Origin and other games but i'm unable to see a beutyfull movie. Please help me

  Read the article

• In CentOS 4.3 Webmin 1.3000 bandwidth monitoring is eating disk space. How to delete those files?

  - by Silkograph

  I maintain Linux server being used for Mail, Squid and DNS service. Recently I observed that something was eating server disk space. But at last, today I caught the culprit which was consuming the disk by storing large number of files. On this server, Webmin 1.300 is installed. We use Squid proxy and Sarg to monitor Internet access. I always manually clear Sarg generated files under /var/www/html/squid for last few years. But I never realized that Webmin is also storing some kind of bandwidth log files in its' directory structure. I have noticed that under /etc/webmin/bandwidth/hours it has stored more thousands of files since year 2007 totaling about 17 GB. We have used 40 GB HDD for this server machine. My question is how can I delete those (/etc/webmin/bandwidth/hours) files safely?

  Read the article

• Network and log monitoring and vulnerability scanning

  - by user137799

  I am trying to find out if there is any application or service in UNIX that will - 1. Monitor network interfaces for bandwidth usage 2. When network flaps occur send out a e-mail. 3. When duplicate mac-addresses or loop occurs in network - send out alerts. 4. Do a network vulnerability scan and be able to detect utorrent application on our network. Need to know which linux distribution will be best to support that specific application Thanks

  Read the article

• Sharing soundcard to network.

  - by zerkms

  Let's suppose I have a laptop (L) and desktop PC (D), both with Windows 7 onboard. It is SB X-Fi extreme soundcard with rather good 5.1 home theater connected. But it is not comfortable to watch video sitting on the sofa from my desktop (sofa is in the center of the room and D is in the corner), even though it is 23" monitor. So I'm watching everything from the laptop. So the question - is it possible somehow to "share" soundcard from D to L, so I will watch the video from notebook and listen the sound from the 5.1? L and D are connected via wi-fi (fast enough).

  Read the article

• Media center consumes all available memory when attempting to play music off of a server

  - by RCIX

  I have Windows 7 Ultimate, and recently, when i try to play a song off of my Twonky Media Server/Windows Media Connect (based on an HP WHS with an Atom), it plays choppily. When i open Resource Monitor, it shows that after ordering the music to play, memory usage rapidly spikes to consume most, if not all, of the available memory on my system (excluding a couple hundred megabytes in standby). Why does it do this and is there anything i can do to stop it? Edit: it happens when I attempt to browse the server's music, not just when i play music. Edit 2: the "ehshell" process is what consumes the memory, appears to me something specific to media center. Moreover, the ehshell process doesn't die in this case. Edit 3: It only happens when browsing my Twonky library, and not my Windows Media Connect.

  Read the article

• Create intentional border with xrandr

  - by benizi

  Is there a way to tell xrandr "this space intentionally left blank"? I have a laptop that drives its internal display at 1920x1080, but the external monitor I'm using, due to its different aspect ratio, doesn't have that mode. It runs at 1920x1200. So, the basic setup: xrandr \ --output LVDS-1 --mode 1920x1080 \ --output DP-1 --mode 1920x1200 --same-as LVDS-1 [not to scale:] +-----------------------------------+ ¦ ¦ ¦ ¦ (laptop) ¦ (external) ¦ ¦ (LVDS-1) ¦ (DP-1) ¦ ¦ ¦ ¦ ¦ ¦ ¦ +-----------------¦ ¦ (blank...) ¦ ¦ +-----------------+ How can I specify that the 1920x120-sized region below LVDS-1 should be displayed as a black bar that can't be accessed by mouse on DP-1? I tried just coping with --panning 1920x1200+0+0/1920x1080+0+0/0/0/0/120, but I found the screen movement to be very annoying. Update: I found a workaround. (Update 2: changed it to an answer, per suggestion -- workaround doesn't answer the underlying question of leaving space blank.)

  Read the article

• What's an easy way to shut down a computer that I'm connected to via RDP

  - by MBraedley

  I have a secondary machine on my local network that I usually use via RDP. Most of the time, it's on 24/7, but there are times when I may want to shut it down from the RDP client machine. The shutdown and restart options aren't available from the Windows XP start menu when you connect to a machine via RDP, so how can I shut this machine off without actually going to the physical machine? Also note that this computer currently doesn't have a monitor attached to it, which is partly why I want to be able to shut it down over RDP.

  Read the article

• Unable to extend desktop

  - by CSharperWithJava

  I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

  Read the article

• Advice on Computer Specs for overall development/general use machine

  - by Ender

  At the moment I am restricted to a laptop with 512MB of RAM, a 120GB HDD and a 1.5GHz Intel processor for all my development and general browsing needs, and as you can probably tell using it for anything modern is a painful experience. As a result I've decided to buy myself a new desktop computer, one that will stand the test of time and one that can be upgraded easily. Rather than build the machine myself I've decided to go through Dell as I've had good experiences with them when purchasing computers for my family. I've had my eye on this as it's got a good amount of RAM, has a decent-rated processor and isn't priced too badly. http://www1.euro.dell.com/uk/en/home/Desktops/inspiron-580/pd.aspx?refid=inspiron-580&s=dhs&cs=ukepp1&~oid=uk~en~20211~inspiron-580_d005827~~ Intel® Core™ i5 Processor 750 (2.66GHz, 8MB) Genuine Windows® 7 Home Premium 64bit - English Display Not Included ATI Radeon™ HD 5450 1GB DDR3 graphics 6144MB Dual Channel DDR3 [3x2048] Memory 1TB (7200rpm) SATA Hard Drive DVD +/- RW Drive (read/write CD & DVD) with DVD Burn software 1 year of coverage included with your PC McAfee® Security Centre - 15 Month Protection - English After the pain of using a slow laptop for all this time the main thing I want is speed. I may look to play a couple of basic games on it, nothing too powerful. Obviously I'll be doing some development on it too so it'll have to be able to handle the latest IDE's and Database tools like SQL Server pretty quickly. Finally, should I ever need to improve it I'd like to be able to add more RAM and change some of the parts. I wouldn't have thought this would be a problem but a few people I've spoken to have said that the amount of RAM the motherboard can handle isn't that great. Is this true? How long can I expect to be using this computer before it's too slow? Thanks in advance for the help.

  Read the article

• How can I see the structure of a webpage inline?

  - by Coldblackice

  How can I see a webpage's structure "inline" with the visual representation of the actual page, all at once? I'm trying to understand HTML layout better, but it's hard to get a feel for it, even having the source open on a separate monitor, because there's just so much expansive and miscellaneous code. I suppose I could sift through it, clean it up, and set up some type of custom collapsible tree system, but that would take too long for the amount of pages I'd like to get a quick view of the layout/structure of. For reference, I'm using Firefox for my internet browsing.

  Read the article

• Monit send alert to nagios NSCA

  - by mYzk

  I want to monitor a web with monit check host function and if the site is down then alert it to nagios nsca so it sends the info to nagios and nagios marks it as status OK or host down for example. The problem is that how can I make the monit alert fuction send the info to nagios nsca. I am not sure that this will work, but what I came up with is: set alert exec 'echo -e "nagios nsca format" | /usr/local/nagios/bin/send_nsca -H serveraddress -c /usr/local/nagios/etc/send_nsca.cfg' Would this work and is it the best solution to work with or can it be done some other way?

  Read the article

• What is the worst Mac OS X annoyance in your opinion?

  - by jasonh

  I'll start with multi-monitor support. I'm trying to set up a Macbook to use an external display and I can't for the life of me get it to move the Dock over to the external display. That and it won't let me disable the Macbook's internal LCD. Please put one item into each post so that the community can vote on each issue. Also please list any workaround if you have it and what version of the OS it applies to. Thanks!

  Read the article

• Lock Windows keyboard and mouse but still display screen normally

  - by Stephen Lacy

  I'm using windows 7, I have a dual monitor display. It displays important information related to the business, I'd rather that random users that walk in can't just walk over to it and start using the computer with the same access rights as the user the monitoring software is running as. What I would like is if any time someone presses a button on the keyboard including alt-ctrl-delete all that would appear is a dialog asking for a password. Then I can click cancel and it will return to showing the data I want displayed. ClearLock doesn't work I tried it btw

  Read the article

• How do I lower idle cpu usage in ubuntu linux? Gnome or KDE Variants

  - by Jasen

  My question comes from a kde desktop currently, but it also happens with the gnome instance. When just sitting there, with only the cpu monitor widget running. no open windows, no background processes other than the desktop, my cpu is at ~20%. I wanna know how to fix this, and possibly get better performance out of it. When running my windows side, the cpu will sit at zero, and i generally load new programs about 400ms faster. With windows 7 being as slow as it is, this is not acceptable. and the widget is only set to check every 500ms, so im almost completely sure its not the widget. My system is a Gateway nv 53 amd 2.0 ghz turion with 4 gb of installed ram, and 500 gb hd. both linux and windows are 64 bit. average ram use on either system is about 1.4 gb for just the os

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >