Search Results

Search found 31501 results on 1261 pages for 'event log'.

Page 184/1261 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

  • How to log this exception if log4net appender fails to write in database?

    - by Basmah
    Hello , Please help me in the following case. I am using log4net api in my application to log any important event or information as well as logging my exceptions in database. There might be an exception while using log4net api , if it fails to perform logging into database then HOW THIS EXCEPTION WILL BE STORED? WHERE ALL OTHER LOGGING AND EXCEPTION LOGGING WILL BE STORED IN CASE IF THIS LOG4NET API FAILS TO PERFORM LOGGING ?? Plese help me. I am a final year student of Undergraduate Studies. Thank you!

    Read the article

  • how to interpret testng console log message for passing tests?

    - by Kunal Cholera
    I ran testng tests for my test classes, I get the following three types of log output when I run the passing tests. I am using org.testng.AssertJUnit.assertTrue() methods in my tests. [testng] PASSED: testMethod1 on null(test.foo.bar.Class1) [testng] PASSED: testMethod2 on Default test name(test.foo.bar.jar.Class2) [testng] PASSED: testMethod3 Can any one please tell me why for some tests it says "on null" for some it says "on Default test name ... " and for some it does not say anything on the console output. Specifically I want to make it consistent message. Environment : linux Testng framework : 6.3.2beta please advise. thanks.

    Read the article

  • log file not generated while accessing a jar having log4j support.

    - by naveen garimella
    I have a x.jar which is being used by some client y.jar. Both x.jar and y.jar are at the same package level. i have put the log4j.xml at the same package level. But the log file is never generated. Can i know why? I have tried few other options as well but no luck till now. i have added log4j-1.2.16.jar to ClassPath: variable in manifest files of both x.jar and y.jar. Put log4j.xml at the class level of y.jar which actually calls the x.jar classes. package structure is as follows: x.jar --manifest.mf has a entry ClassPath:log4j-1.2.16.jar y.jar --manifest.mf has a entry ClassPath:log4j-1.2.16.jar log4j-1.2.16.jar log4j.xml --has a RollingFileAppender. Can any one suggest whether i am missing anything?

    Read the article

  • PHP error logging - can I log all ofg the site's error to a single file?

    - by mawg
    hi, in PHP.INI, I can set the variable "error_log" and it is currently set to "error_log", which manes one file of that name in each directory Do you know ... if I set it to "public_html/error_log" - will I get only one single error log file? Any other way to do so? I really just want a single site-wide error file to check, rather than one on each sub-directory. For bonus marks, can I send myself an email each time a new entry is added to the file? Left as an exercise for the reader - can I ignore some "errors" which aren't really?

    Read the article

  • How to log the raw SQL from Oracle occi C++ api?

    - by savanna
    One of our customers is complaining our application is not working. Their reasoning is that our sql function call to their Oracle database is not getting the "expected" result. Sometime, it should failed but our application get success from their database. It's really frustrating because it's their database and we cannot do any test on it. We are using the C++ Oracle OCCI API. Is there anyway we can log the raw sql from our end? That will be very helpful and we can ship the script to them and let them debug in their system to figure out the problem. Thanks in advance.

    Read the article

  • How to Handle Console.log and error output in JavaScript.

    - by uber_n00b
    I have a constructor that has a series of classes and functions within it - in each function I check if the param is set to show the error and output if so. Like so using an inline if. The issue and question is short of keeping two versions is this approach not wise in that each IF has to be evaluated thus adding to the time it takes to perform? debugSlide = (bag.debug==1)? console.log("item id =" + bag.itemId) : 0; How do you do this? Any pointers on where I can find tips on this? Thanks in advance!

    Read the article

  • Logging connection strings

    If you some of the dynamic features of SSIS such as package configurations or property expressions then sometimes trying to work out were your connections are pointing can be a bit confusing. You will work out in the end but it can be useful to explicitly log this information so that when things go wrong you can just review the logs. You may wish to develop this idea further and encapsulate such logging into a custom task, but for now lets keep it simple and use the Script Task. The Script Task code below will raise an Information event showing the name and connection string for a connection. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Get the connection string, we need to know the name of the connection Dim connectionName As String = "My OLE-DB Connection" Dim connectionString As String = Dts.Connections(connectionName).ConnectionString ' Format the message and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connectionName, connectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Dts.TaskResult = Dts.Results.Success End Sub End Class Building on that example it is probably more flexible to log all connections in a package as shown in the next example. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Loop through all connections in the package For Each connection As ConnectionManager In Dts.Connections ' Get the connection string and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connection.Name, connection.ConnectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Next Dts.TaskResult = Dts.Results.Success End Sub End Class By using the Information event it makes it readily available in the designer, for example the Visual Studio Output window (Ctrl+Alt+O) or the package designer Execution Results tab, and also allows you to readily control the logging by choosing which events to log in the normal way. Now before somebody starts commenting that this is a security risk, I would like to highlight good practice for building connection managers. Firstly the Password property, or any other similar sensitive property is always defined as write-only, and secondly the connection string property only uses the public properties to assemble the connection string value when requested. In other words the connection string will never contain the password. I have seen a couple of cases where this is not true, but that was just bad development by third-parties, you won’t find anything like that in the box from Microsoft.   Whilst writing this code it made me wish that there was a custom log entry that you could just turn on that did this for you, but alas connection managers do not even seem to support custom events. It did however remind me of a very useful event that is often overlooked and fits rather well alongside connection string logging, the Execute SQL Task’s custom ExecuteSQLExecutingQuery event. To quote the help reference Custom Messages for Logging - Provides information about the execution phases of the SQL statement. Log entries are written when the task acquires connection to the database, when the task starts to prepare the SQL statement, and after the execution of the SQL statement is completed. The log entry for the prepare phase includes the SQL statement that the task uses. It is the last part that is so useful, how often have you used an expression to derive a SQL statement and you want to log that to make sure the correct SQL is being returned? You need to turn it one, by default no custom log events are captured, but I’ll refer you to a walkthrough on setting up the logging for ExecuteSQLExecutingQuery by Jamie.

    Read the article

  • Markus Zirn, "Big Data with CEP and SOA" @ SOA, Cloud &amp; Service Technology Symposium 2012

    - by JuergenKress
    ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 Early-Bird Registration is Now Open with Special Pricing! Register before July 1, 2012 to qualify for discounts. Visit the Registration page for details. The International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Big Data with CEP and SOA - September 25, 2012 - 14:15 Speaker: Markus Zirn, Oracle and Baz Kuthi, Avocent The "Big Data" trend is driving new kinds of IT projects that process machine-generated data. Such projects store and mine using Hadoop/ Map Reduce, but they also analyze streaming data via event-driven patterns, which can be called "Fast Data" complementary to "Big Data". This session highlights how "Big Data" and "Fast Data" design patterns can be combined with SOA design principles into modern, event-driven architectures. We will describe specific architectures that combines CEP, Distributed Caching, Event-driven Network, SOA Composites, Application Development Framework, as well as Hadoop. Architecture patterns include pre-processing and filtering event streams as close as possible to the event source, in memory master data for event pattern matching, event-driven user interfaces as well as distributed event processing. Focus is on how "Fast Data" requirements are elegantly integrated into a traditional SOA architecture. Markus Zirn is Vice President of Product Management covering Oracle SOA Suite, SOA Governance, Application Integration Architecture, BPM, BPM Solutions, Complex Event Processing and UPK, an end user learning solution. He is the author of “The BPEL Cookbook” (rated best book on Services Oriented Architecture in 2007) as well as “Fusion Middleware Patterns”. Previously, he was a management consultant with Booz Allen & Hamilton’s High Tech practice in Duesseldorf as well as San Francisco and Vice President of Product Marketing at QUIQ. Mr. Zirn holds a Masters of Electrical Engineering from the University of Karlsruhe and is an alumnus of the Tripartite program, a joint European degree from the University of Karlsruhe, Germany, the University of Southampton, UK, and ESIEE, France. KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Markus Zirn,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • How to future-proof my touch-enabled web application?

    - by Rice Flour Cookies
    I recently went out and purchased a touch-screen monitor with the intention of learning how to program touch-enabled web applications. I had reviewed the MDN documentation about touch events, as well as the W3C specification. To get started, I wrote a very short test page with two event handlers: one for the mousedown event and one for the touchstart event. I fired up the web page in IE and touched the document and found that only the mousedown event fired. I saw the same behavior with Firefox, only to find out later that Firefox can be set to enable the touchstart event using about:config. When touch events are enabled, the touchstart event fires, but not mousedown. Chrome was even stranger: it fired both events when I touched the document: touchstart and mousedown, in that order. Only on my Android phone does it appear to be the case that only the touchstart event fires when I touch the document. I did a a Google search and ended up on two interesting pages. First, I found the page on CanIUse for touch events: http://caniuse.com/#feat=touch Can I Use clearly indicates that IE does not support touch events as of this writing, and Firefox only supports touch events if they are manually enabled. Furthermore, all four browsers I mentioned treat the touch in a completely different way. It boils down to this: IE: simulated mouse click Firefox with touch disabled: simulated mouse click Firefox with touch enabled: touch event Chrome: touch event and simulated mouse click Android: touch event What is more frustrating is that Google also found a Microsoft page called RethinkIE. RethinkIE brags about touch support in IE; as a matter of fact, one of their slogans is "Touch the Web". It links to a number of touch-based application. I followed some of these links, and as best I can tell, it's just like CanIUse described; no proper touch support; just simulated mouse clicks. The MDN (https://developer.mozilla.org/en-US/docs/Web/API/Touch) and W3C (http://www.w3.org/TR/touch-events/) documentation describe a far richer interface; an interface that doesn't just simulate mouse clicks, but keeps track of multiple touches at once, the contact area, rotation, and force of each touch, and unique identifiers for each touch so that they can be tracked individually. I don't see how simulated mouse clicks can ever touch the above described functionality, which, once again, is part of the W3C specification, although it is listed as "non-normative", meaning that a browser can claim to be standards-compliant without implementing it. (Why bother making it part of the standard, then?) What motivated my research is that I've written an HTML5 application that doesn't work on Android because Android doesn't fire mouse events. I'm now afraid to try to implement touch for my application because the browsers all behave so differently. I imagine that at some time in the future, the browsers might start handling touch similarly, but how can I tell how they might be handled in the future short of writing code to handle the behavior of each individual browser? Is it possible to write code today that will work with touch-enabled browsers for years to come? If so, how?

    Read the article

  • TechEd Israel 2010 may only accept speakers from sponsors

    - by RoyOsherove
    A month or so ago, Microsoft Israel started sending out emails to its partners and registered event users to “Save the date!” – Micraoft Teched Israel is coming, and it’s going to be this november! “Great news” I thought to myself. I’d been to a couple of the MS teched events, as a speaker and as an attendee, and it was lovely and professionally done. Israel is an amazing place for technology and development and TechEd hosted some big names in the world of MS software. A couple of weeks ago, I was shocked to hear from a couple of people that Microsoft Israel plans to only accept non-MS teched speakers, only from sponsors of the event. That means that according to the amount that you have paid, you get to insert one or more of your own selected speakers as part of teched. I’ve spent the past couple of weeks trying to gather more evidence of this, and have gotten some input from within MS about this information. It looks like that is indeed the case, though no MS rep. was prepared to answer any email I had publicly. If they approach me now I’d be happy to print their response. What does this mean? If this is true, it means that Microsoft Israel is making a grave mistake – They are diluting the quality of the speakers for pure money factors. That means, that as a teched attendee, who paid good money, you might be sitting down to watch nothing more that a bunch of infomercials, or sub-standard speakers – since speakers are no longer selected on quality or interest in their topic. They are turning the conference from a learning event to a commercial driven event They are closing off the stage to the community of speakers who may not be associated with any organization  willing to be a sponsor They are losing speakers (such as myself) who will not want to be part of such an event. (yes – even if my company ends up sponsoring the event, I will not take part in it, Sorry Eli!) They are saying “F&$K you” to the community of MVPs who should be the people to be approached first about technical talks (my guess is many MVPs wouldn’t want to talk at an event driven that way anyway ) I do hope this ends up not being true, but it looks like it is. MS Israel had already done such a thing with the Developer Days event previouly held in Israel – only sponsors were allowed to insert speakers into the event. If this turns out to be true I would urge the MS community in Israel to NOT TAKE PART AT THIS EVENT in any form (attendee, speaker, sponsor or otherwise). by taking part, you will be telling MS Israel it’s OK to piss all over the community that they are quietly suffocating anyway. The MVP case MS Israel has managed to screw the MVP program as well. MS MVPs (I’m one) have had a tough time here in Israel the past couple of years. ever since yosi taguri left the blue badge ranks, there was not real community leader left. Whoever runs things right now has their eyes and minds set elsewhere, with the software MVP community far from mind and heart. No special MVP events (except a couple of small ones this year). No real MVP leadership happens here, with the MVP MEA lead (Ruari) being on a remote line, is not really what’s needed. “MVP? What’s that?” I’m sure many MS Israel employees would say. Exactly my point. Last word I’ve been disappointed by the MS machine for a while now, but their slowness to realize what real community means in the past couple of years really turns me off. Maybe it’s time to move on. Maybe I shouldn’t be chasing people at MS Israel begging for a room to host the Agile Israel user group. Maybe it’s time to say a big bye bye and start looking at a life a bit more disconnected.

    Read the article

  • Logging connection strings

    If you some of the dynamic features of SSIS such as package configurations or property expressions then sometimes trying to work out were your connections are pointing can be a bit confusing. You will work out in the end but it can be useful to explicitly log this information so that when things go wrong you can just review the logs. You may wish to develop this idea further and encapsulate such logging into a custom task, but for now lets keep it simple and use the Script Task. The Script Task code below will raise an Information event showing the name and connection string for a connection. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Get the connection string, we need to know the name of the connection Dim connectionName As String = "My OLE-DB Connection" Dim connectionString As String = Dts.Connections(connectionName).ConnectionString ' Format the message and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connectionName, connectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Dts.TaskResult = Dts.Results.Success End Sub End Class Building on that example it is probably more flexible to log all connections in a package as shown in the next example. Imports System Imports Microsoft.SqlServer.Dts.Runtime Public Class ScriptMain Public Sub Main() Dim fireAgain As Boolean ' Loop through all connections in the package For Each connection As ConnectionManager In Dts.Connections ' Get the connection string and log it via an information event Dim message As String = String.Format("Connection ""{0}"" has a connection string of ""{1}"".", _ connection.Name, connection.ConnectionString) Dts.Events.FireInformation(0, "Information", message, Nothing, 0, fireAgain) Next Dts.TaskResult = Dts.Results.Success End Sub End Class By using the Information event it makes it readily available in the designer, for example the Visual Studio Output window (Ctrl+Alt+O) or the package designer Execution Results tab, and also allows you to readily control the logging by choosing which events to log in the normal way. Now before somebody starts commenting that this is a security risk, I would like to highlight good practice for building connection managers. Firstly the Password property, or any other similar sensitive property is always defined as write-only, and secondly the connection string property only uses the public properties to assemble the connection string value when requested. In other words the connection string will never contain the password. I have seen a couple of cases where this is not true, but that was just bad development by third-parties, you won’t find anything like that in the box from Microsoft.   Whilst writing this code it made me wish that there was a custom log entry that you could just turn on that did this for you, but alas connection managers do not even seem to support custom events. It did however remind me of a very useful event that is often overlooked and fits rather well alongside connection string logging, the Execute SQL Task’s custom ExecuteSQLExecutingQuery event. To quote the help reference Custom Messages for Logging - Provides information about the execution phases of the SQL statement. Log entries are written when the task acquires connection to the database, when the task starts to prepare the SQL statement, and after the execution of the SQL statement is completed. The log entry for the prepare phase includes the SQL statement that the task uses. It is the last part that is so useful, how often have you used an expression to derive a SQL statement and you want to log that to make sure the correct SQL is being returned? You need to turn it one, by default no custom log events are captured, but I’ll refer you to a walkthrough on setting up the logging for ExecuteSQLExecutingQuery by Jamie.

    Read the article

  • SQL Server Transaction Marks: Restoring multiple databases to a common relative point

    - by Mladen Prajdic
    We’re all familiar with the ability to restore a database to point in time using the RESTORE WITH STOPAT statement. But what if we have multiple databases that are accessed from one application or are modifying each other? And over multiple instances? And all databases have different workloads? And we want to restore all of the databases to some known common relative point? The catch here is that this common relative point isn’t the same point in time for all databases. This common relative point in time might be now in DB1, now-1 hour in DB2 and yesterday in DB3. And we don’t know the exact times. Let me introduce you to Transaction Marks. When we run a marked transaction using the WITH MARK option a flag is set in the transaction log and a row is added to msdb..logmarkhistory table. When restoring a transaction log backup we can restore to either before or after that marked transaction. The best thing is that we don’t even need to have one database modifying another database. All we have to do is use a marked transaction with the same name in different database. Let’s see how this works with an example. The code comments say what’s going on. USE master GOCREATE DATABASE TestTxMark1GOUSE TestTxMark1GOCREATE TABLE TestTable1( ID INT, VALUE UNIQUEIDENTIFIER) -- insert some data into the table so we can have a starting pointINSERT INTO TestTable1SELECT ROW_NUMBER() OVER(ORDER BY number) AS RN, NULLFROM master..spt_valuesORDER BY RNSELECT *FROM TestTable1GO-- TAKE A FULL BACKUP of the databseBACKUP DATABASE TestTxMark1 TO DISK = 'c:\TestTxMark1.bak'GO USE master GOCREATE DATABASE TestTxMark2GOUSE TestTxMark2GOCREATE TABLE TestTable2( ID INT, VALUE UNIQUEIDENTIFIER)-- insert some data into the table so we can have a starting pointINSERT INTO TestTable2SELECT ROW_NUMBER() OVER(ORDER BY number) AS RN, NEWID()FROM master..spt_valuesORDER BY RNSELECT *FROM TestTable2GO-- TAKE A FULL BACKUP of our databseBACKUP DATABASE TestTxMark2 TO DISK = 'c:\TestTxMark2.bak'GO -- start a marked transaction that modifies both databasesBEGIN TRAN TxDb WITH MARK -- update values from NULL to random value UPDATE TestTable1 SET VALUE = NEWID(); -- update first 100 values from random value -- to NULL in different DB UPDATE TestTxMark2.dbo.TestTable2 SET VALUE = NULL WHERE ID <= 100;COMMITGO     -- some time goes by here -- with various database activity... -- We see two entries for marks in each database. -- This is just informational and has no bearing on the restore itself.SELECT * FROM msdb..logmarkhistory USE masterGO-- create a log backup to restore to mark pointBACKUP LOG TestTxMark1 TO DISK = 'c:\TestTxMark1.trn'GO-- drop the database so we can restore it backDROP DATABASE TestTxMark1GO USE masterGO-- create a log backup to restore to mark pointBACKUP LOG TestTxMark2 TO DISK = 'c:\TestTxMark2.trn'GO-- drop the database so we can restore it backDROP DATABASE TestTxMark2GO -- RESTORE THE DATABASE BACK BEFORE OUR TRANSACTION-- restore the full backup RESTORE DATABASE TestTxMark1 FROM DISK = 'c:\TestTxMark1.bak' WITH NORECOVERY;-- restore the log backup to the transaction markRESTORE LOG TestTxMark1 FROM DISK = 'c:\TestTxMark1.trn' WITH RECOVERY, -- recover to state before the transaction STOPBEFOREMARK = 'TxDb'; -- recover to state after the transaction -- STOPATMARK = 'TxDb';GO -- RESTORE THE DATABASE BACK BEFORE OUR TRANSACTION-- restore the full backup RESTORE DATABASE TestTxMark2 FROM DISK = 'c:\TestTxMark2.bak' WITH NORECOVERY;-- restore the log backup to the transaction markRESTORE LOG TestTxMark2 FROM DISK = 'c:\TestTxMark2.trn' WITH RECOVERY, -- recover to state before the transaction STOPBEFOREMARK = 'TxDb'; -- recover to state after the transaction -- STOPATMARK = 'TxDb';GO USE TestTxMark1-- we restored to time before the transaction -- so we have NULL values in our tableSELECT * FROM TestTable1 USE TestTxMark2-- we restored to time before the transaction -- so we DON'T have NULL values in our tableSELECT * FROM TestTable2   Transaction marks can be used like a crude sync mechanism for cross database operations. With them we can mark our databases with a common “restore to” point so we know we have a valid state between all databases to restore to.

    Read the article

  • MVC Communication Pattern

    - by Kedu
    This is kind of a follow up question to this http://stackoverflow.com/questions/23743285/model-view-controller-and-callbacks, but I wanted to post it separately, because its kind of a different topic. I'm working on a multiplayer cardgame for the Android platform. I split the project into MVC which fits the needs pretty good, but I'm currently stuck because I can't figure out a good way to communicate between the different parts. I have everything setup and working with the controller being a big state machine, which is called over and over from the gameloop, and calls getter methods from the GUI and the android/network part to get the input. The input itself in the GUI and network is set by inputlisteners that set a local variable which I read in the getter method. So far so good, this is working. But my problem is, the controller has to check every input separately,so if I want to add an input I have to check in which states its valid and call the getter method from all these states. This is not good, and lets the code look pretty ugly, makes additions uncomfortable and adds redundance. So what I've got from the question I mentioned above is that some kind of command or event pattern will fit my needs. What I want to do is to create a shared and threadsafe queue in the controller and instead of calling all these getter methods, I just check the queue for new input and proceed it. On the other side, the GUI and network don't have all these getters, but instead create an event or command and send it to the controller through, for example, observer/observable. Now my problem: I can't figure out a way, for these commands/events to fit a common interface (which the queue can store) and still transport different kind of data (button clicks, cards that are played, the player id the command comes from, synchronization data etc.). If I design the communication as command pattern, I have to stick all the information that is needed to execute the command into it when its created, that's impossible because the GUI or network has no knowledge of all the things the controller needs to execute stuff that needs to be done when for example a card is played. I thought about getting this stuff into the command when executing it. But over all the different commands I have, I would need all the information the controller has, and thus give the command a reference to the controller which would make everything in it public, which is real bad design I guess. So, I could try some kind of event pattern. I have to transport data in the event. So, like the command, I would have an interface, which all events have in common, and can be stored in the shared queue. I could create a big enum with all the different events that a are possible, save one of these enums in the actual event, and build a big switch case for the events, to proceed different stuff for different events. The problem here: I have different data for all the events. But I need a common interface, to store the events in a queue. How do I get the specific data, if I can only access the event through the interface? Even if that wouldn't be a problem, I'm creating another big switch case, which looks ugly, and when i want to add a new event, I have to create the event itself, the case, the enum, and the method that's called with the data. I could of course check the event with the enum and cast it to its type, so I can call event type specific methods that give me the data I need, but that looks like bad design too.

    Read the article

  • Why does my sharepoint web part event handler lose the sender value on postback?

    - by vishal shah
    I have a web part which is going to be a part of pair of connected web parts. For simplicity, I am just describing the consumer web part. This web part has 10 link buttons on it. And they are rendered in the Render method instead ofCreateChildControls as this webpart will be receiving values based on input from the provider web part. Each Link Button has a text which is decided dynamically based on the input from provider web part. When I click on any of the Link Buttons, the event handler is triggered but the text on the Link Button shows up as the one set in CreateChildControls. When I trace the code, I see that the CreateChildControls gets called before the event handler (and i think that resets my Link Buttons). How do I get the event handler to show me the dynamic text instead? Here is the code... public class consWebPart : Microsoft.SharePoint.WebPartPages.WebPart { private bool _error = false; private LinkButton[] lkDocument = null; public consWebPart() { this.ExportMode = WebPartExportMode.All; } protected override void CreateChildControls() { if (!_error) { try { base.CreateChildControls(); lkDocument = new LinkButton[101]; for (int i = 0; i < 10; i++) { lkDocument[i] = new LinkButton(); lkDocument[i].ID = "lkDocument" + i; lkDocument[i].Text = "Initial Text"; lkDocument[i].Style.Add("margin", "10 10 10 10px"); this.Controls.Add(lkDocument[i]); lkDocument[i].Click += new EventHandler(lkDocument_Click); } } catch (Exception ex) { HandleException(ex); } } } protected override void Render(HtmlTextWriter writer) { writer.Write("<table><tr>"); for (int i = 0; i < 10; i++) { writer.Write("<tr>"); lkDocument[i].Text = "LinkButton" + i; writer.Write("<td>"); lkDocument[i].RenderControl(writer); writer.Write("</td>"); writer.Write("</tr>"); } writer.Write("</table>"); } protected void lkDocument_Click(object sender, EventArgs e) { string strsender = sender.ToString(); LinkButton lk = (LinkButton)sender; } protected override void OnLoad(EventArgs e) { if (!_error) { try { base.OnLoad(e); this.EnsureChildControls(); } catch (Exception ex) { HandleException(ex); } } } private void HandleException(Exception ex) { this._error = true; this.Controls.Clear(); this.Controls.Add(new LiteralControl(ex.Message)); } }

    Read the article

  • Should I worry about DDMS console log messages "Can't bind to local nnnn for debugger"?

    - by Chris
    I'm new to Android programming (and Eclipse IDE and Android emulator). I've got Hello World and some of Notepad working, but I'm still constantly getting quite a few DDMS console log messages (shown below) about not being able to bind locals for debugger. Is this a problem? Can I get rid of these messages somehow? [2010-05-29 21:03:16 - ddms]Can't bind to local 8601 for debugger [2010-05-29 21:05:26 - Device]Failed to delete temporary package: device (emulator-5556) request rejected: device not found [2010-05-29 21:06:47 - ddms]Can't bind to local 8600 for debugger [2010-05-29 21:07:05 - ddms]Can't bind to local 8601 for debugger [2010-05-29 21:07:05 - ddms]Can't bind to local 8602 for debugger [2010-05-29 21:07:06 - ddms]Can't bind to local 8604 for debugger [2010-05-29 21:07:07 - ddms]Can't bind to local 8609 for debugger [2010-05-29 21:07:17 - ddms]Can't bind to local 8610 for debugger [2010-05-29 21:07:20 - ddms]Can't bind to local 8613 for debugger [2010-05-29 21:08:20 - ddms]Can't bind to local 8616 for debugger [2010-05-29 21:08:20 - ddms]Can't bind to local 8618 for debugger [2010-05-29 21:08:20 - ddms]Can't bind to local 8620 for debugger [2010-05-29 21:08:20 - ddms]Can't bind to local 8627 for debugger [2010-05-29 21:08:21 - ddms]Can't bind to local 8632 for debugger [2010-05-29 21:08:23 - ddms]Can't bind to local 8636 for debugger [2010-05-29 21:08:23 - ddms]Can't bind to local 8640 for debugger [2010-05-29 21:08:23 - ddms]Can't bind to local 8643 for debugger

    Read the article

  • mouse to Three.js world coordinates during TrackballControls

    - by PanChan
    I know there are a lot of answers how to translate the mouse coordinates to the Three.js world coordinates (I prefere this one). But I have troubles on calculating when using TrackballControls. First what I expect to do: I want to add a zoom function to my scene. Not by the mouse wheel, the user should be able to draw a rectangular and by lifting the mouse button, the camera is zooming on this rectangular. I've implemented all and it works, but only when the user didn't rotate/zoom/pan with TrackballControls! If the camera was manipulated, I get wrong coordinates for my drawn rectangular. I really can't figure out why... I only know that it's an issue with TrackballControls, because without them, it works. Does anyone see my mistake? I'm sitting here for two days now and can't find it.... :( var onZoomPlaneMouseDown = function(event){ event.preventDefault(); var plane = document.getElementById("zoomPlane"); var innerPlane = document.getElementById("innerZoomPlane"); var mouseButton = event.keyCode || event.which; mouse.x = ( event.clientX / WIDTH ) * 2 - 1; mouse.y = - ( event.clientY / HEIGHT ) * 2 + 1; if(mouseButton === 1){ var vector = new THREE.Vector3( mouse.x, mouse.y, 0.5 ); projector.unprojectVector( vector, camera ); var dir = vector.sub( camera.position ).normalize(); var distance = - camera.position.z / dir.z; zoomPlaneUpperCorner = camera.position.clone().add( dir.multiplyScalar( distance ) ); innerPlane.style.display = "block"; innerPlane.style.top = event.clientY + "px"; innerPlane.style.left = event.clientX + "px"; } if(mouseButton === 3){ plane.style.display = "none"; innerPlane.style.display = "none"; } }; var onZoomPlaneMouseUp = function(event){ event.preventDefault(); var plane = document.getElementById("zoomPlane"); var innerPlane = document.getElementById("innerZoomPlane"); var mouseButton = event.keyCode || event.which; mouse.x = ( event.clientX / WIDTH ) * 2 - 1; mouse.y = - ( event.clientY / HEIGHT ) * 2 + 1; var vector = new THREE.Vector3( mouse.x, mouse.y, 0.5 ); projector.unprojectVector( vector, camera ); var dir = vector.sub( camera.position ).normalize(); var distance = - camera.position.z / dir.z; zoomPlaneLowerCorner = camera.position.clone().add( dir.multiplyScalar( distance ) ); if(mouseButton === 1){ plane.style.display = "none"; innerPlane.style.display = "none"; var center = new THREE.Vector3(); center.subVectors(zoomPlaneLowerCorner, zoomPlaneUpperCorner); center.multiplyScalar( 0.5 ); center.add(zoomPlaneUpperCorner); var rayDir = new THREE.Vector3(); rayDir.subVectors(center, camera.position ).normalize(); controls.target = center; var height = zoomPlaneUpperCorner.y - zoomPlaneLowerCorner.y; var distanceToCenter = camera.position.distanceTo(center); var minDist = (height / 2) / (Math.tan((camera.fov/2)*Math.PI/180)); camera.translateOnAxis(rayDir, (distanceToCenter - minDist)); } };

    Read the article

  • Regarding playing media file in Android media player application

    - by Mangesh
    Hi. I am new to android development. I just started with creating my own media player application by looking at the code samples given in Android SDK. While I am trying to play a local media file (m.3gp), I am getting IOException error :: error(1,-4). Please can somebody help me in this regard. Here is my code. package com.mediaPlayer; import java.io.IOException; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.media.MediaPlayer; import android.media.MediaPlayer.OnBufferingUpdateListener; import android.media.MediaPlayer.OnCompletionListener; import android.media.MediaPlayer.OnPreparedListener; import android.media.MediaPlayer.OnVideoSizeChangedListener; import android.view.SurfaceHolder; import android.util.Log; public class MediaPlayer1 extends Activity implements OnBufferingUpdateListener, OnCompletionListener,OnPreparedListener, OnVideoSizeChangedListener,SurfaceHolder.Callback { private static final String TAG = "MediaPlayerByMangesh"; // Widgets in the application private Button btnPlay; private Button btnPause; private Button btnStop; private MediaPlayer mMediaPlayer; private String path = "m.3gp"; private SurfaceHolder holder; private int mVideoWidth; private int mVideoHeight; private boolean mIsVideoSizeKnown = false; private boolean mIsVideoReadyToBePlayed = false; // For the id of radio button selected private int radioCheckedId = -1; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { Log.d(TAG, "Entered OnCreate:"); super.onCreate(savedInstanceState); setContentView(R.layout.main); Log.d(TAG, "Creatinging Buttons:"); btnPlay = (Button) findViewById(R.id.btnPlay); btnPause = (Button) findViewById(R.id.btnPause); // On app load, the Pause button is disabled btnPause.setEnabled(false); btnStop = (Button) findViewById(R.id.btnStop); btnStop.setEnabled(false); /* * Attach a OnCheckedChangeListener to the radio group to monitor radio * buttons selected by user */ Log.d(TAG, "Watching for Click"); /* Attach listener to the Calculate and Reset buttons */ btnPlay.setOnClickListener(mClickListener); btnPause.setOnClickListener(mClickListener); btnStop.setOnClickListener(mClickListener); } /* * ClickListener for the Calculate and Reset buttons. Depending on the * button clicked, the corresponding method is called. */ private OnClickListener mClickListener = new OnClickListener() { @Override public void onClick(View v) { switch (v.getId()) { case R.id.btnPlay: Log.d(TAG, "Clicked Play Button"); Log.d(TAG, "Calling Play Function"); Play(); break; case R.id.btnPause: Pause(); break; case R.id.btnStop: Stop(); break; } } }; /** * Play the Video. */ private void Play() { // Create a new media player and set the listeners mMediaPlayer = new MediaPlayer(); Log.d(TAG, "Entered Play function:"); try { mMediaPlayer.setDataSource(path); } catch(IOException ie) { Log.d(TAG, "IO Exception:" + path); } mMediaPlayer.setDisplay(holder); try { mMediaPlayer.prepare(); } catch(IOException ie) { Log.d(TAG, "IO Exception:" + path); } mMediaPlayer.setOnBufferingUpdateListener(this); mMediaPlayer.setOnCompletionListener(this); mMediaPlayer.setOnPreparedListener(this); //mMediaPlayer.setOnVideoSizeChangedListener(this); //mMediaPlayer.setAudioStreamType(AudioManager.STREAM_MUSIC); } public void onBufferingUpdate(MediaPlayer arg0, int percent) { Log.d(TAG, "onBufferingUpdate percent:" + percent); } public void onCompletion(MediaPlayer arg0) { Log.d(TAG, "onCompletion called"); } public void onVideoSizeChanged(MediaPlayer mp, int width, int height) { Log.v(TAG, "onVideoSizeChanged called"); if (width == 0 || height == 0) { Log.e(TAG, "invalid video width(" + width + ") or height(" + height + ")"); return; } mIsVideoSizeKnown = true; mVideoWidth = width; mVideoHeight = height; if (mIsVideoReadyToBePlayed && mIsVideoSizeKnown) { startVideoPlayback(); } } public void onPrepared(MediaPlayer mediaplayer) { Log.d(TAG, "onPrepared called"); mIsVideoReadyToBePlayed = true; if (mIsVideoReadyToBePlayed && mIsVideoSizeKnown) { startVideoPlayback(); } } public void surfaceChanged(SurfaceHolder surfaceholder, int i, int j, int k) { Log.d(TAG, "surfaceChanged called"); } public void surfaceDestroyed(SurfaceHolder surfaceholder) { Log.d(TAG, "surfaceDestroyed called"); } public void surfaceCreated(SurfaceHolder holder) { Log.d(TAG, "surfaceCreated called"); Play(); } private void startVideoPlayback() { Log.v(TAG, "startVideoPlayback"); holder.setFixedSize(176, 144); mMediaPlayer.start(); } /** * Pause the Video */ private void Pause() { ; /* * If all fields are populated with valid values, then proceed to * calculate the tips */ } /** * Stop the Video. */ private void Stop() { ; /* * If all fields are populated with valid values, then proceed to * calculate the tips */ } /** * Shows the error message in an alert dialog * * @param errorMessage * String the error message to show * @param fieldId * the Id of the field which caused the error. This is required * so that the focus can be set on that field once the dialog is * dismissed. */ private void showErrorAlert(String errorMessage, final int fieldId) { new AlertDialog.Builder(this).setTitle("Error") .setMessage(errorMessage).setNeutralButton("Close", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { findViewById(fieldId).requestFocus(); } }).show(); } } Thanks, Mangesh Kumar K.

    Read the article

  • Asynchronous HTTP Client for Java

    - by helifreak
    As a relative newbie in the Java world, I am finding many things frustratingly obtuse to accomplish that are relatively trivial in many other frameworks. A primary example is a simple solution for asynchronous http requests. Seeing as one doesn't seem to already exist, what is the best approach? Creating my own threads using a blocking type lib like httpclient or the built-in java http stuff, or should I use the newer non-blocking io java stuff - it seems particularly complex for something which should be simple. What I am looking for is something easy to use from a developer point of view - something similar to URLLoader in AS3 - where you simply create a URLRequest - attach a bunch of event handlers to handle the completion, errors, progress, etc, and call a method to fire it off. If you are not familiar with URLLoader in AS3, its so super easy and looks something like this: private void getURL(String url) { URLLoader loader = new URLLoader(); loader.addEventListener(Event.Complete, completeHandler); loader.addEventListener(HTTPStatusEvent.HTTP_STATUS, httpStatusHandler); loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler); URLRequest request = new URLRequest(url); // fire it off - this is asynchronous so we handle // completion with event handlers loader.load(request); } private void completeHandler(Event event) { URLLoader loader = (URLLoader)event.target; Object results = loader.data; // process results } private void httpStatusHandler(Event event) { // check status code } private void ioErrorHandler(Event event) { // handle errors }

    Read the article

  • Intercepting/Hijacking iPhone Touch Events for MKMapView

    - by Shawn
    Is there a bug in the 3.0 SDK that disables real-time zooming and intercepting the zoom-in gesture for the MKMapView? I have some real simple code so I can detect tap events, but there are two problems: zoom-in gesture is always interpreted as a zoom-out none of the zoom gestures update the Map's view in realtime. In hitTest, if I return the "map" view, the MKMapView functionality works great, but I don't get the opportunity to intercept the events. Any ideas? MyMapView.h: @interface MyMapView : MKMapView { UIView *map; } MyMapView.m: - (id)initWithFrame:(CGRect)frame { if (![super initWithFrame:frame]) return nil; self.multipleTouchEnabled = true; return self; } - (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event { NSLog(@"Hit Test"); map = [super hitTest:point withEvent:event]; return self; } - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event { NSLog(@"%s", __FUNCTION__); [map touchesCancelled:touches withEvent:event]; } - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent*)event { NSLog(@"%s", __FUNCTION__); [map touchesBegan:touches withEvent:event]; } - (void)touchesMoved:(NSSet*)touches withEvent:(UIEvent*)event { NSLog(@"%s, %x", __FUNCTION__, mViewTouched); [map touchesMoved:touches withEvent:event]; } - (void)touchesEnded:(NSSet*)touches withEvent:(UIEvent*)event { NSLog(@"%s, %x", __FUNCTION__, mViewTouched); [map touchesEnded:touches withEvent:event]; }

    Read the article

  • Flex actionscript extending DateChooser, events in calendar

    - by Nemi
    ExtendedDateChooser class is great solution for simple event calendar used in my flex project. You can find it if google for "Adding-Calendar-Event-Entries-to-the-Flex-DateChooser-Component" with a link of updated solution in comments of the post. I posted files below. Problem in that calendar is text events are missing when month is changed. Is there updateCompleted event in Actionscript just like in dateChooser flex component? Like in: <mx:DateChooser id="dc" updateCompleted="goThroughDateChooserCalendarLayoutAndSetEventsInCalendarAgain()"</mx> When scroll event is added, which is available in Actionscript, it gets dispatched but after updateDisplayList() is fired, so didn't manage to answer, why are calendar events erased? Any suggestions, what to add in code, maybe override some function? ExtendedDateChooserClass.mxml <?xml version='1.0' encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:mycomp="cyberslingers.controls.*" layout="absolute" creationComplete="init()"> <mx:Script> <![CDATA[ import cyberslingers.controls.ExtendedDateChooser; import mx.rpc.events.ResultEvent; import mx.rpc.events.FaultEvent; import mx.controls.Alert; public var mycal:ExtendedDateChooser = new ExtendedDateChooser(); // collection to hold date, data and label [Bindable] public var dateCollection:XMLList = new XMLList(); private function init():void { eventList.send(); } private function readCollection(event:ResultEvent):void { dateCollection = event.result.calendarevent; //Position and size the calendar mycal.width = 400; mycal.height = 400; //Add the data from the XML file to the calendar mycal.dateCollection = dateCollection; //Add the calendar to the canvas this.addChild(mycal); } private function readFaultHandler(event:FaultEvent):void { Alert.show(event.fault.message, "Could not load data"); } ]]> </mx:Script> <mx:HTTPService id="eventList" url="data.xml" resultFormat="e4x" result="readCollection(event);" fault="readFaultHandler(event);"/> </mx:Application> ExtendedDateChooser.as package cyberslingers.controls { import flash.events.Event; import flash.events.TextEvent; import mx.collections.ArrayCollection; import mx.controls.Alert; import mx.controls.CalendarLayout; import mx.controls.DateChooser; import mx.core.UITextField; import mx.events.FlexEvent; public class ExtendedDateChooser extends DateChooser { public function ExtendedDateChooser() { super(); this.addEventListener(TextEvent.LINK, linkHandler); this.addEventListener(FlexEvent.CREATION_COMPLETE, addEvents); } //datasource public var dateCollection:XMLList = new XMLList(); //-------------------------------------- // Add events //-------------------------------------- /** * Loop through calendar control and add event links * @param e */ private function addEvents(e:Event):void { // loop through all the calendar children for(var i:uint = 0; i < this.numChildren; i++) { var calendarObj:Object = this.getChildAt(i); // find the CalendarLayout object if(calendarObj.hasOwnProperty("className")) { if(calendarObj.className == "CalendarLayout") { var cal:CalendarLayout = CalendarLayout(calendarObj); // loop through all the CalendarLayout children for(var j:uint = 0; j < cal.numChildren; j++) { var dateLabel:Object = cal.getChildAt(j); // find all UITextFields if(dateLabel.hasOwnProperty("text")) { var day:UITextField = UITextField(dateLabel); var dayHTML:String = day.text; day.selectable = true; day.wordWrap = true; day.multiline = true; day.styleName = "EventLabel"; //TODO: passing date as string is not ideal, tough to validate //Make sure to add one to month since it is zero based var eventArray:Array = dateHelper((this.displayedMonth+1) + "/" + dateLabel.text + "/" + this.displayedYear); if(eventArray.length > 0) { for(var k:uint = 0; k < eventArray.length; k++) { dayHTML += "<br><A HREF='event:" + eventArray[k].data + "' TARGET=''>" + eventArray[k].label + "</A>"; } day.htmlText = dayHTML; } } } } } } } //-------------------------------------- // Events //-------------------------------------- /** * Handle clicking text link * @param e */ private function linkHandler(event:TextEvent):void { // What do we want to do when user clicks an entry? Alert.show("selected: " + event.text); } //-------------------------------------- // Helpers //-------------------------------------- /** * Build array of events for current date * @param string - current date * */ private function dateHelper(renderedDate:String):Array { var result:Array = new Array(); for(var i:uint = 0; i < dateCollection.length(); i++) { if(dateCollection[i].date == renderedDate) { result.push(dateCollection[i]); } } return result; } } } data.xml <?xml version="1.0" encoding="utf-8"?> <rss> <calendarevent> <date>8/22/2009</date> <data>This is a test 1</data> <label>Stephens Test 1</label> </calendarevent> <calendarevent> <date>8/23/2009</date> <data>This is a test 2</data> <label>Stephens Test 2</label> </calendarevent> </rss>

    Read the article

  • How to use webbrowser control DocumentCompleted event in C# ?

    - by Margus
    Before starting writing this question, i was trying to solve following // 1. navigate to page // 2. wait until page is downloaded // 3. read and write some data from/to iframe // 4. submit (post) form The problem was, that if a iframe exists on a web page, DocumentCompleted event would get fired more then once (after each document has been completed). It was highly likely that program would have tried to read data from DOM that was not completed and naturally - fail. But suddenly while writing this question 'What if' monster inspired me, and i fix'ed the problem, that i was trying to solve. As i failed Google'ing this, i thought it would be nice to post it here. private int iframe_counter = 1; // needs to be 1, to pass DCF test public bool isLazyMan = default(bool); /// <summary> /// LOCK to stop inspecting DOM before DCF /// </summary> public void waitPolice() { while (isLazyMan) Application.DoEvents(); } private void webBrowser1_Navigating(object sender, WebBrowserNavigatingEventArgs e) { if(!e.TargetFrameName.Equals("")) iframe_counter --; isLazyMan = true; } private void webBrowser1_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { if (!((WebBrowser)sender).Document.Url.Equals(e.Url)) iframe_counter++; if (((WebBrowser)sender).Document.Window.Frames.Count <= iframe_counter) {//DCF test DocumentCompletedFully((WebBrowser)sender,e); isLazyMan = false; } } private void DocumentCompletedFully(WebBrowser sender, WebBrowserDocumentCompletedEventArgs e){ //code here } For now at least, my 5m hack seems to be working fine. Maybe i am really failing at querying google or MSDN, but i can not find: "How to use webbrowser control DocumentCompleted event in C# ?"

    Read the article

  • Node remains in commissioning status

    - by Vinitha
    I have been trying to set up ubuntu cloud 12.04. I'm kind of new to MAAS and ubuntu. Here is what I followed. Have installed MAAS server using the steps provided in https://wiki.ubuntu.com/ServerTeam/MAAS For the node, I installed the Ubuntu 12.04 Server Image on a USB Stick. Then restarted the node and opted to enlist the node via boot media, with PXE. once the process was done, the node was powered off as expected. I manually powered on the node, as my node is not PXE enabled. Result - No node was visible on MAAS UI Since step 2 didn't work, I added the node via maas-cli. command. After the execution of this command I got the node reflected on to my MAAS UI. But the status continues to be in "Commissioning" for a long time. Then I executed "maas-cli maas nodes check-commissioning " and i got "Unrecognised signature: POST check_commissioning". I'm not sure where is the error. Could some one please help me solve this issue. I checked the following log file but found no error related to commissioning (pserv.log / maas.log / celery.log/celery-region.log). I found this entry in my auth.log "Nov 16 18:20:34 ubuntuCloud sshd[4222]: Did not receive identification string from xxx.xx.xx.x" not sure if it indicates anything as the ip that is mentioned is not of the node nor of the MAAS server. I also verified the time on the server and node using date cmd - (at one instance the times are : Server: Fri Nov 16 18:15:51 IST 2012 and Node Fri Nov 16 18:15:43 IST 2012). Not sure if 'date' the right cmd to set the time. I have also check maas_local_settings.py for the MAAS url. I'm not sure what are the logs that need to be verified. Is there any log that can be checked on the Node. Thanks Vinitha

    Read the article

  • WCF: Serializing and Deserializing generic collections

    - by Fabiano
    I have a class Team that holds a generic list: [DataContract(Name = "TeamDTO", IsReference = true)] public class Team { [DataMember] private IList<Person> members = new List<Person>(); public Team() { Init(); } private void Init() { members = new List<Person>(); } [System.Runtime.Serialization.OnDeserializing] protected void OnDeserializing(StreamingContext ctx) { Log("OnDeserializing of Team called"); Init(); if (members != null) Log(members.ToString()); } [System.Runtime.Serialization.OnSerializing] private void OnSerializing(StreamingContext ctx) { Log("OnSerializing of Team called"); if (members != null) Log(members.ToString()); } [System.Runtime.Serialization.OnDeserialized] protected void OnDeserialized(StreamingContext ctx) { Log("OnDeserialized of Team called"); if (members != null) Log(members.ToString()); } [System.Runtime.Serialization.OnSerialized] private void OnSerialized(StreamingContext ctx) { Log("OnSerialized of Team called"); Log(members.ToString()); } When I use this class in a WCF service, I get following log output OnSerializing of Team called System.Collections.Generic.List 1[Person] OnSerialized of Team called System.Collections.Generic.List 1[Person] OnDeserializing of Team called System.Collections.Generic.List 1[ENetLogic.ENetPerson.Model.FirstPartyPerson] OnDeserialized of Team called ENetLogic.ENetPerson.Model.Person[] After the deserialization members is an Array and no longer a generic list although the field type is IList< (?!) When I try to send this object back over the WCF service I get the log output OnSerializing of Team called ENetLogic.ENetPerson.Model.FirstPartyPerson[] After this my unit test crashes with a System.ExecutionEngineException, which means the WCF service is not able to serialize the array. (maybe because it expected a IList<) So, my question is: Does anybody know why the type of my IList< is an array after deserializing and why I can't serialize my Team object any longer after that? Thanks

    Read the article

  • Best way to display a list of events by month

    - by EmmyS
    I have a mySQL table of events and want to display them in a list using PHP. Pretty simple, except I only want to display the month name once, for example: May 2010 12th, 7 pm. Event 1 - event one description 15th, 5:30 pm. Event 2 - event two description June 2010 9th, 7 pm. Event 1 - event one description 11th, 5:30 pm. Event 2 - event two description I'm very new at SQL and PHP. I can think of one way to do it. It would involve selecting all records grouped by date, then looping through all records, comparing the month/year value each time and the first time the month/year doesn't match, print a new header row to my HTML table. I can't believe it's the best or most efficient way to go. Any ideas for a newbie? I'm sure my way would work, but it's inelegant at best, and processor-intensive at worst.

    Read the article

  • Populating array of input fields as alternate fields using jQuery UI datepicker

    - by Micor
    I am using jquery ui datepicker in order to populate start and end dates for multiple events on the same page, the number of events is dynamic and I need to post day, month and year as separate fields, so I have something like this: <input type="text" name="event[0].startDate" class="date"/> <input type="hidden" name="event[0].startDate_day" class="startDate_day" /> <input type="hidden" name="event[0].startDate_month" class="startDate_month" /> <input type="hidden" name="event[0].startDate_year" class="startDate_year" /> <input type="text" name="event[0].endDate" class="date"/> <input type="hidden" name="event[0].endDate_day" class="endDate_day" /> <input type="hidden" name="event[0].endDate_month" class="endDate_month" /> <input type="hidden" name="event[0].endDate_year" class="startDate_year" /> event[1]... event[2]... I started working on jQuery functionality and this is what I have so far, which will populate alternate fields for startDate by class, of course it will not do what I need because I need to populate by field name rather then class: $(".date").datepicker({ onClose: function(dateText,picker) { $('.startDate_month').val( dateText.split(/\//)[0] ); $('.startDate_day').val( dateText.split(/\//)[1] ); $('.startDate_year').val( dateText.split(/\//)[2] ); }}); I need help figuring out how can I get the name of the input field within datepicker function so the alternate field assignment done by that field name + _day, month, year so this function can work for all the events on the page, making function above look more like: $(".date").datepicker({ onClose: function(dateText,picker) { $('input[' + $name + '_month' + ']').val( dateText.split(/\//)[0] ); $('input[' + $name + '_day' + ']').val( dateText.split(/\//)[1] ); $('input[' + $name + '_year' + ']').val( dateText.split(/\//)[2] ); }}); Hope that makes sense :) Thanks

    Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >