Search Results

Search found 12705 results on 509 pages for 'ip routing'.

Page 186/509 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

  • XenServer VM's lose network settings

    - by Ash
    We deploy virtual machines using Citrix XenServer 6.0 for our clients. Two seperate clients experience the same issue: when a Server 2008 virtual machine is restarted, the static IP addresses (network address, subnet, gateway, primary DNS) don't appear to apply correctly as the IP's cannot be pinged, network services cannot be accessed etc. The issue is resolved by manually switching the network adapters to DHCP, then re-setting them to the original static IP's. While not a major issue, it's a pain when restarting servers due to Windows Updates, plus iSCSI drives need to be manually connected to Windows again via iSCSI Initiator. We have tried removed the network adapters from the virtual machine under XenCentre but without luck. Anyone experienced similar issues?

    Read the article

  • How does Router know where to forward packet

    - by kornelijepetak
    If several computers with local addresses (192.168.0.#) are connected to a router and each computer opens a web browser and requests a page over HTTP, when these TCP:80 packets are sent out, the router switches the local address with the static IP of the router (i.e. Provider given IP) so the server can reply to the appropriate address. But how does the router know to which computer to forward the HTTP reply, since the TCP header does not contain the local IP address (does it?), and all computers are using port 80? Does this have anything to do with the MAC addresses? How exactly does this work?

    Read the article

  • Too many connectons to 212.192.255.240

    - by Castor
    Recently, my Internet slowed down drastically. I downloaded a tool to see the TCP/IP connections from my Vista computer. I found out that a lot TCP/IP connections are being connected to 212.192.255.240 through SVCHost. It seems that it is trying to connect to different ports. I think that my computer is being infected with some kind of malware etc. But I am not sure how to get rid of it. I did a little bit of research on this IP but found nothing. Any suggestions are highly apprecitated.

    Read the article

  • High Availability Configuration using Heartbeat and Pacemaker

    - by pradeepchhetri
    I have the following setup: I have configured high availability between two load balancers (HAProxy) so that if HAProxy1 get down, the floating IP gets transferred to the other load balancer HAProxy2, hence all the clients will get the response from HAProxy2, which at the back-end is doing LB among the sme two webserver. This is for removing the single point of failure in case of only one HAProxy. Whenever I stops the hearbeat in HAProxy1, the floating IP goes to HAProxy2. But I want to configure such that whenever the process haproxy goes down, the floating IP should get assigned to HAProxy2. Can someone tell me how to implement it ?

    Read the article

  • Access Bind9 DNS in Virtualbox on Host

    - by Philipp Melab
    I've set up a Ubuntu 10.04 Virtual Box with a Bind9 DNS server. The Box has a NAT Network connection for internet access and a host-only adapter for static ip connections from the host (OSX Lion). Thats the only way i managed to get internet and static ip inside the box, guess there is a better one ... The DNS works fine from inside the virtualbox, but not from the host. The http and ftp on the guest system is accessible via both addresses, so connection between host and guest are fine i guess. I tried to add both IP's as name servers. I'm completely new to Bind9 and DNS configuration. Anybody has a hint for me whats wrong? Or how i have to configure the DNS server?

    Read the article

  • Belking Wireless Router unable to connect to internet although wireless connection is working

    - by ptamzz
    I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

    Read the article

  • IIS7 VPS Hosting Server Configuration

    - by Craig
    I have just registered a Windows 2008 VPS hosting account which I plan on running a couple of web sites on. In the past I have just used shared hosting in which everything is set up for me, so need a few pointers. When I register a new domain it asks for a couple of name servers. How do I set this up on my server? Can I just give it the IP address of the VPS server? Do I have to register some web sites with ns1, ns2 host headers in IIS? It's all a bit confusing when never done before. I have two web sites I plan on hosting. I configured both in IIS with a different IP address (the VPS plan has 2) but when trying to access the site via IP it always displays the default web site. If I turn off the default web site it just 404's. Is there any simple tutorials for setting up a couple of sites from scratch.

    Read the article

  • How to configure 2nd network card for use in VMWare Workstation?

    - by Timo
    Hi all, I am using VMWare Workstation 6.5, connected to my network with a bridged adapter so that the virtual machine OS (Windows XP) has its own IP adress. This just worked out of the box. Now my host machine (Windows Vista) has an additional network card that is directly connected to another computer using a crossover cable (and fixed IP adress 10.1.1.4, while the "main" network connection is using DHCP with IP in the 192.68.0.* range). How can I use that network connection as well in the virtual machine? Do I need to bridge my 2nd network adapter to some VMnetX adapter? Do I need to add a host virtual adapter? I do not know much about networks, and the VMWare network settings really confuse me :-) Thanks, Timo

    Read the article

  • Is there a way to determine which service does an outgoing connection?

    - by fluxtendu
    I'm redoing my firewall configuration with more restrictive policies and I would like to determine the provenance (and/or destination) of some outgoing connections. I have an issue because they come from svchost.exe and go to web content/application delivery providers - or similar: 5 IP in range: 82.96.58.0 - 82.96.58.255 --> Akamai Technologies akamaitechnologies.com 3 IP in range: 93.150.110.0 - 93.158.111.255 --> Akamai Technologies akamaitechnologies.com 2 IP in range: 87.248.194.0 - 87.248.223.255 --> LLNW Europe 2 llnw.net 205.234.175.175 --> CacheNetworks, Inc. cachefly.net 188.121.36.239 --> Go Daddy Netherlands B.V. secureserver.net So is it possible to know which service does a particular connection? Or what's your recommendation about the rules applied to these ones? (Comodo Firewall & Windows 7)

    Read the article

  • Problem in listening to multicast in multihomed Linux server

    - by Lior
    I am trying to write a multicast client on a machine with two NICs, and I can't make it work. I can see with a sniffer that once I start the program the NIC (eth4) start receiving the multicast datagrams: y.y.y.y. (some ip) - z.z.z.z (multicast ip, not my eth4 NIC IP) UDP Source port: kkk (some other port) Destination port: xxx (multicast port) However, I can't get those packets using my program (listening to port xxx on eth4). I also added: route add 224.0.0.0 netmask 240.0.0.0 dev eth4 Searched the web for some examples/explanations, but it seems like I do what everybody else does. Any help will be appreciated. is there anything else to do with route/iptables?

    Read the article

  • Management VLAN Cisco Catalyst

    - by cha789
    I have configured a couple of VLANs on a Cisco Catalyst switch, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect to the switch. How can i block all but one specific IP-address to telnet into the switch? As i understand vlan 1 has many task regarding different protocols and i do not want to break that but only allow one specific IP-address to connect to the switch with a telnet client [actually the gateway ip address of the switch].

    Read the article

  • Why is it a bad idea to use multiple NAT layers or is it?

    - by iamrohitbanga
    The computer network of an organization has a NAT with 192.168/16 IP address range. There is a department with a server that has an IP address 192.168.x.y and this server handles hosts of this department with another NAT with the IP address range 172.16/16. Thus there are 2 layers of NAT. Why don't they have subnetting instead. This would allow easy routing. I feel multiple layers of NAT can cause performance losses. Could you please help me compare the two design strategies.

    Read the article

  • Run script when POST data is sent to Apache

    - by Nathan Adams
    Among my several years of running servers there seems to be a pattern with most spam activity. My question/idea is that is there a way to tell Apache to run a script when POST data is detected? What I would want to do is perform a reverse DNS lookup on the client's IP address, and then perform a DNS lookup on the hostname in the PTR record. Afterwards, perform some checks, excuse the pseudo-code: if PTR does not exist: deny POST request if IP of PTR hostname = client's IP Allow POST request else deny POST request Though I don't care about GET requests, even though they can be just as malicious, this idea is targeted towards spam comments which use POST data to send the comment data to the web server. In order to make sure there isn't much of a time delay, I would run my own recursive DNS server. Please do note, this isn't meant to be a sliver bullet to spam, but it should decrease the volume. Possible or impossible?

    Read the article

  • Isn't NAT a MUST when a LAN uses rfc 1918 private IPs?

    - by aks
    Isn't NAT a MUST when a LAN uses rfc 1918 private IPs? Can an organization assign its hosts with private IPs and still communicate with the external world without NAT? how can an internal host with a private IP (say 10.1.1.1) communicate with external world without NAT? I mean, how can the reply/response packet from the external world reach the original source as the packet with Dest IP = 10.1.1.1 will get lost as it can not be routed as many organizations can use the same IP. Why doesn't rfc 1918 (Address Allocation for Private Internets) make any mention of NAT?

    Read the article

  • Why can't I create an Alias Resource Record Set for an EC2 instance

    - by praterade
    I have been working with AWS for over a year, setting up EC2 instances, domains, ELBs, etc. When I want to assign a subdomain to an EC2 instance, I have to create an elastic IP (that I pay for), then assign a CNAME record to that elastic IP. When I want to assign a subdomain to an ELB (load balancer) instance, I just create an alias resource record set to the ELB. I've read over the docs and don't understand why AWS doesn't support aliasing to instances. Am I missing a key concept here? Wouldn't it be simpler to just alias EC2 instances and skip the whole elastic IP bit?

    Read the article

  • what config files need to be transferred while migrating apache vhosts from old suse server to new suse server?

    - by jarus
    I have an old server with suse on it and its hosting numerous website under same IP , now i am trying to migrate the websites and all the contents of the old suse server to a new server with open suse 12.1 , i have transferred "/srv/www/vhosts" "/etc/apache2/vhosts.d" "/etc/apache2//httpd.conf" "/etc/apache2/listen.conf" "/etc/apache2/default-server.conf" i have transferred all the database files also . i am trying to replace the old server with the new server , i tried changing the ip address with the old server's ip address but its not working. what files do i need to transfer and what do i need to do to get the new server hosting the websites in place of the old server , please, any help will be greatly appreciated.

    Read the article

  • Get the "source network address" in Event ID 529 audit entries on Windows XP

    - by Make it useful Keep it simple
    In windows server 2003 when an Event 529 (logon failure) occures with a logon type of 10 (remote logon), the source network IP address is recorded in the event log. On a windows XP machine, this (and some other details) are omitted. If a bot is trying a brute force over RDP (some of my XP machines are (and need to be) exposed with a public IP address), i cannot see the originating IP address so i don't know what to block (with a script i run every few minutes). The DC does not log this detail either when the logon attempt is to the client xp machine and the DC is only asked to authenticate the credentials. Any help getting this detail in the log would be appreciated.

    Read the article

  • Hosting a site on amazon ec2

    - by Khalid Mushtaq
    I have recently bought an amazon ec2 instance. Now I want to host a website. I have googled and found some useful info but there is some confusion in my mind. Suppose domain name is "http://www.example.com" That's what I have done so far. I have configured my domain locally on amazon ec2 instance and it's working fine when I open that url in amazon ec2 instance's browser. I have used http://www.example.com in /etc/hosts file point it to 127.0.0.1 to open locally on instance. I have got one elastic ip address and associated it with the instance. I have changed http://www.example.com A's record with the elastic IP that I have got in above step. Now what should I do? When some user will open my website anywhere in the world, will it get pointed to my instanace's ip address? Have I done proper configurations for website on instance?

    Read the article

  • Cisco PIX 515 doesn't seem to be passing traffic through according to static route

    - by Liquidkristal
    Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

    Read the article

  • hosts.deny not working

    - by Captain Planet
    Currently I am watching the live auth.log and someone is continuously trying the brute force attack for 10 hours. Its my local server so no need to worry but I want to test. I have installed denyhosts. There is already an entry for that IP address in hosts.deny. But still he is trying the attacks from same IP. System is not blocking that. Firstly I don't know how did that IP address get entered in that file. I didn't enter it, is there any other system script which can do that. hosts.deny is sshd: 120.195.108.22 sshd: 95.130.12.64 hosts.allow ALL:ALL sshd: ALL Is there any iptable setting that can override the host.deny file

    Read the article

  • CNAME Wildcards Server 2003

    - by Sean.C
    Hi Gents, I'm looking to set up a wildcard cname on a FQDN but cant seem to get it to work. This is what i'm trying to achive: A Record : domain.co.uk : my.ip.address.1 A Record : en.domain.co.uk : my.ip.address.1 cname : www.*.en.domain.co.uk : --> uk.domain.co.uk I'm reasonably new to all this kind of thing, so it's pretty probably pretty straight forward. The number of sites forbids the use of multiple IP addresses. Thanks for any assistance.

    Read the article

  • How do I set up my own proxy server?

    - by NJTechGuy
    This website (abc.com) slowed access from our original IP address. How do I implement my own proxy server to hide my IP while browsing abc.com? Do I need special hardware/software combo to achieve this? If I can generate about 5 proxies and alternate amongst those 5 while browsing abc.com would be awesome. Please suggest. Thanks guys! p.s : I want to know if I can generate proxy IPs of the type 123.34.21.140 prot 80 on my own? I want to use those IP/port combos in my Python scripts (urllib2/set_proxy).

    Read the article

  • Sharing internet connection from Windows XP using wi-fi router

    - by Darius
    Hi, I have an network configuration like: Ethernet cable from ISP connected to Windows XP machine, configured with static IP 192.168.0.3 Another ethernet connection from 2nd Windows XP machine's network adapter to a Wi-Fi router (D-Link Airport G+) XP set to "Share internet connection", the 2nd adapter configured as static to 192.169.0.1 D-Link Airport Wi-Fi router also configured as "static connection", it's IP set to 192.169.0.2, default gateway set to 192.169.0.1. Network mask everywhere is 24. Laptop computer connected with the router with static IP 192.169.0.3 The problems are: XP machine sees the router (it's able to ping it and access it via the web admin tool) The router somehow cannot PING the XP machine (using the tool provided by the web-based admin tool) The laptop computer cannot ping anything and cannot be pinged The router is only accessible when the ethernet cable is connected with a router's 1-4 LAN port, when I connect it via "WAN" port (which I believe is the proper one) it's not visible from the XP machine If you have similar experience with configuring a network like this I would really appreciate your help. I cannot use the Wi-Fi router with the ISP cable itself.

    Read the article

  • Unable to connect my computer from LAN (http, smb) in UBUNTU 10.04

    - by Abdul Majeed
    I installed ubuntu 10.04, Apache, PHP, mysql, smb. Everything work fine in locally in my IP. When i trying to access my computer from LAN (other computer), it shows unable to connect. when i ping my IP from remote computer, its pinging OK. I can access internet, and all other systems (http, smb). But the problem is no one can't access my computer remotely in my LAN network. My ip is 192.168.85.105 and i want access(Appaceh,SMB) from 192.168.85.10. Is there any proxy firewall settings? I had tried following commands.. sudo iptables -F or sudo iptables-restore [logout require] If it does not work then try to disable net-filter sudo ufw --disable Please give me the solution.

    Read the article

  • port redirection on solaris 11

    - by mo3lyana
    I'm trying port forwarding on solaris 11. I have a mechine behind a server that use solaris 11. I try to access that mechine from the external port, and forwarded by solaris 11 mechine to that machine using the ip filter. I give ipnat.conf configuration like this: rdr net0 0.0.0.0/0 port 1428 -> 10.1.18.178 port 22 but the response appeared when I tried to remote is connection time out, but if I redirect to a solaris 11 machine itself, the configuration is running well. I've enabled IP forwarding on the system root@solaris11:/etc/ipf# ndd -get /dev/ip ip_forwarding 1 root@solaris11:/etc/ipf# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing enabled enabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled root@solaris11:/etc/ipf# ipadm show-prop PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE ipv4 forwarding rw on on off on,off is there any configuration that I missed?

    Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >