Search Results

Search found 7044 results on 282 pages for 'monitor stand'.

Page 191/282 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Want 2 external monitors with a 13' MacBook - is this possible?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• What are my X client options for MS Windows?

  - by Nick Bolton

  I need to connect to a headless X Windows server (running on Ubuntu) from my MS Windows 7 computer over a 100 Mbit network. I could use VNC (or any other remote viewer) but the 3D graphics performance would be lousy I imagine. I used to have it hooked up to a monitor, but that's broken now and I can't afford a new one. A friend advised that I could try and use an X client, and that the 3D graphics wont suffer too much over 100 Mbit. Cygwin seems to be an option, but I was wondering if there were any more lightweight options.

  Read the article

• Display Resolution Getting Changed Automatically (sometimes) - Win7x64 - Asus M3A78-EM

  - by kamleshrao

  AMD PC Motherboard - Asus M3A78-EM (installed VGA drivers from Asus website - AMD_VGA_V863200_XPVistaWin7.zip) It has VGA and HDMI inbuilt ports (ATI Radeon HD 3200 Graphics 256MB) VGA is connected to my ViewSonic Monitor. HDMI is connected to LG LCD TV OS - Windows 7 x64 Ultimate Sometimes, when I reboot/start my PC, my ViewSonic display resolution changes and does not show the recommended value(1440x900) in Resolution Settings. The HDMI display works well always. But after multiple reboots/starts, the problem gets fixed automatically and I get back my recommended resolution on ViewSonic display. I am not making any changes to the existing drivers. It sometimes work well, and sometimes doesn't work. Can someone assist me resolving this permanently.

  Read the article

• Windows stereo mixer does not hear what programs play in Windows 8?

  - by Suzan Cioc

  How to capture desktop audio with Audacity or similar programs? I need to capture sound which is produced by programs. I remember I should select windows mixer to record it, but currently I hear nothin with audacity. Why? Windows is Windows 8. Is see in record device window, that no sound goes through Windows Mixer record device As you see on picture, Windows Media Player plays sound, while monitor shows no activity. Why? And how to fix?

  Read the article

• MS-DOS application sending screen output to LPT printer

  - by gadget00

  We have a MS-DOS application(coded in FoxPro), and recently had this glitch: the screen menu of the application without reason starts printing in an LPT Panasonic KX-1150 printer. It's a never ending print of all the screens of the application, as if the main output instead of sending it to the monitor, sends it to the printer! It creates a unnamed document with N/D pages and keeps printing forever. We have to turn the printer off and then kill the document in the spool to stop it... The printer is installed with a Generic/Text driver, and has happened to us both in WindowsXP and Win7. What can this be? Thanks in advance

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• Add a server between router and switch (production)

  - by Kossel

  I have a small office network basically like below, there are more router/pc connected in S1. As you can see, the router is doing job of DHCP, DNS. but now I wish to add a Linux server between R1 and S1, So I can monitor the network traffic and do other more advance server admin stuff. the whole office network is 192.168.1.x and people are using their computer everyday. What network configuration should the new Linux server have (both interfaces) in order to minimize the changes need in the network? tried to change R1 ip to 192.168.100.1 them add the server with FE0/0 192.168.100.1 and FE0/1 192.168.1.1 but looks cannot ping the original Router..

  Read the article

• Why does my iTunes use so much CPU time?

  - by bikesandcode

  I have a roughly 2 year old Macbook (10.5). I have iTunes 10. When iTunes is playing MP3s, I see CPU usage of the iTunes process in the system monitor ranging from 65%-75%. When I pause the music, I see CPU usage of about 65%-75%. I do not have any visualisations going, to my knowledge I have not turned on any CPU destroying features, my music library isn't tiny, but it's hardly huge (3GB). This is mildly annoying when I'm plugged into the wall as I only have slightly longer compile times, but if I am out and about, this is a major drain on the battery. Using VLC I see CPU loads of ~= 10% at the most when listening to music and generally lower. What the heck is iTunes doing?

  Read the article

• check_ssh executed from Nagios server returns "Server answer: ", nothing else

  - by phs

  Commmand works on the host I need to monitor (its IP is denoted as $HOSTADDRESS$ here): [root@host ~]# /usr/local/nagios/libexec/check_ssh localhost SSH OK - OpenSSH_4.3 (protocol 2.0) However, on the Nagios server, it does not: root@server:~# /usr/lib/nagios/plugins/check_ssh -H $HOSTADDRESS$ Server answer: I can see that the port is open: root@server:~# /usr/lib/nagios/plugins/check_tcp -H $HOSTADDRESS$ -p 22 TCP OK - 0.123 second response time on port 22|time=0.123277s;;;0.000000;10.000000 And I can verify with telnet: root@server:/etc/nagios3/conf.d# telnet $HOSTADDRESS$ 22 Trying $HOSTADDRESS$... Connected to $HOSTADDRESS$. Escape character is '^]'. After searching the web for two hours and trying different suggestions I am out of ideas. I have several other hosts with similar setup, and they don't have this problem. I have compared the configs and they look the same (I think). I am clearly missing something here.

  Read the article

• Hide Win 8.1 "tip" about "Switch between apps"?

  - by Carl R

  I've just installed Win8.1 and I'm trying to set up IIS. When I open Add remove programs from the start menu I get the pc-settings app. In the pc-settings app I get a "tooltip" or whatever we should call it, that hints me to "Switch between apps" by swiping from the edge. Well fine, but I don't want to do that right now, and I can't get that tip to dissapear. The tip lingers on even into Visual Studio, covering my code. I can't swipe because I don't have a touch screen, and also I'm on a multimonitor system that shows this tip in the middle of the screen. Here's a screenshot for you, where I put the web browser slightly over the left monitor. So, besides rebooting, how am I supposed to kill this very informative tip? EDIT When I kill the app by alt-f4 it dissapears right until I open the settings app again, then it's back. What I'm asking about is how to dismiss items like this in general.

  Read the article

• Why is Chrome receiving data?

  - by Aero

  Chrome seems to be continually receiving data even though I'm not downloading anything. This is making a noticeable impact on my browsing speed. The first screenshot shows Chrome receiving data even though I'm not downloading anything (nor buffering a YouTube video etc.) Even after I completely close Google Chrome, the "chrome.exe" remains in the Resource Monitor list and the "Received bytes" column continually increases in the screenshot below. However, "chrome.exe" does not show up in the Processes tab of Task Manager. This only occurs sometimes, but I don't know why. I have tried running a malware/virus scans to ensure that there is nothing malicious behind this, but those scans have shown nothing. Any ideas on what's causing this?

  Read the article

• windows 2008r2 SNMP hrStorageSize reporting wrong values

  - by Giannis Nohj

  I'm trying to monitor disks on windows 2008 R2 system, but I'm getting wrong values returned from hrStorageSize and hrStorageUsed for one of the 2 disks the system has. Local disk C: is returning correct values, whereas D: disk, which is an SAN disk, is reporting 32G instead of 500G. Output of snmpwalk -v 2c -c public hostname-01 .1.3.6.1.2.1.25.2 : HOST-RESOURCES-MIB::hrStorageDescr.1 = STRING: C:\ Label: Serial Number 7ff87ca6 HOST-RESOURCES-MIB::hrStorageDescr.2 = STRING: D:\ Label:Data Serial Number dab5b0b9 ... HOST-RESOURCES-MIB::hrStorageAllocationUnits.1 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.2 = INTEGER: 4096 Bytes ... HOST-RESOURCES-MIB::hrStorageSize.1 = INTEGER: 35834383 HOST-RESOURCES-MIB::hrStorageSize.2 = INTEGER: 7864320 ... HOST-RESOURCES-MIB::hrStorageUsed.1 = INTEGER: 32460169 HOST-RESOURCES-MIB::hrStorageUsed.2 = INTEGER: 3192302 I have calculated the first disk (C:) size as 136G, which is correct. On the other hand, D: is calculated as 30G, where it should be 500G. I also tried fsutil on the system and the output was correct. Anyone have any ideas?

  Read the article

• List and kill running processes on Mac OS in Ctrl/Alt/Delete-like way?

  - by AP257

  So, what do you do on a Mac when a process (as opposed to an application) is hogging CPU, swamping your machine, and you need to kill it? I know you can use top or open Applications > Utilities > Activity Monitor and kill it from there. But what happens when the process is already using so much CPU that doing either of those tasks is impossible? On Windows, you can just do Ctrl/Alt/Delete and the process list will reliably open. So no matter how much your computer is thrashing, you always have access to the list of processes. On Mac OS, there's Cmd/Alt/Escape, which reliably shows running applications. Fine when it's an application causing the problem. But: what do you do if it's a process?

  Read the article

• Is Zabbix the right tool for me?

  - by hortitude

  I just want to monitor a small handful of servers (less than 10). From reading various places it sounds like the top leading contenders (for open source at least) are: nagios munin zabbix From what I have read a lot of people tend to use munin and nagios together -- munin for history and graphs, and nagios for alerting. On the other hand it sounds like Zabbix is a more complete solution and easier to configure than either of the other two. So I was thinking of going that route. My thoughts right now are: What are the general disadvantages of Zabbix? Does Zabbix have a small footprint on boxes it is monitoring? Do I really need to setup an entire other server for it? I currently have a server that is under very light load -- can I dual purpose it?

  Read the article

• Proxy Server suggestions

  - by Jon Menefee

  Here is the question I have that hopefully is not too general of a question. I have a network with approximately 25 PC's, 3 servers and 25 IP cameras. I have a firewall already on the network and it works fine for what I need, but my client is asking me if there is a way to put a Proxy server on the network to monitor where his employees are going when they surf the Internet. He is not wanting to block them (at least not thru the Proxy server), but he wants to make sure that they arent going to sites that would compromise the networked PCs. I have looked at TMG and it is a little more than what I want. I hesitate adding another firewall to the system because of the security cameras that are presently on the network (IP Cameras). I just want to put a policy in AD that would make certain Users (or Computers) use a Proxy server. Any suggestions on a good proxy server are welcome. Thank you

  Read the article

• Recently reloaded computer, now have trailing effect when windows overlap

  - by Tony

  I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

  Read the article

• Setting up a global MySQL Cluster in the cloud

  - by GregB

  I'm giving the question an overhaul to more specifically identify where I need help. I use two tools to manage a bunch of cloud server: Puppet and Rundeck. Both of these can be configured to use a mysql backend. I'd like to setup an instance of each application in both the U.S., and the U.K., treating the U.K. servers as hot stand-bys in case of failure in the U.S. I want to use a MySql cluster so that the data is automatically replicated from the U.S. to the U.K. Because these are hot standbys, high performance is not a goal. Redundancy and data integrity are most important. My question revolves around the setup of the mysql cluster. I want to run three servers, each one running a data node, a sql node, and a management node. Is this a valid configuration for mysql server? If so, could someone point me in the right direction for creating such a setup? I've downloaded the offical tarball, and the official debian, and the documentation for them contradicts many of the online tutorials. I'm installing on Ubuntu 10.04.

  Read the article

• 150 TB and growing, but how to grow?

  - by seandavi

  My group currently has two largish storage servers, both NAS running debian linux. The first is an all-in-one 24-disk (SATA) server that is several years old. We have two hardware RAIDS set up on it with LVM over those. The second server is 64 disks divided over 4 enclosures, each a hardware RAID 6, connected via external SAS. We use XFS with LVM over that to create 100TB useable storage. All of this works pretty well, but we are outgrowing these systems. Having build two such servers and still growing, we want to build something that allows us more flexibility in terms of future growth, backup options, that behaves better under disk failure (checking the larger filesystem can take a day or more), and can stand up in a heavily concurrent environment (think small computer cluster). We do not have system administration support, so we administer all of this ourselves (we are a genomics lab). So, what we seek is a relatively low-cost, acceptable performance storage solution that will allow future growth and flexible configuration (think ZFS with different pools having different operating characteristics). We are probably outside the realm of a single NAS. We have been thinking about a combination of ZFS (on openindiana, for example) or btrfs per server with glusterfs running on top of that if we do it ourselves. What we are weighing that against is simply biting the bullet and investing in Isilon or 3Par storage solutions. Any suggestions or experiences are appreciated.

  Read the article

• VGA resolution with Sony Bravia TV

  - by prestomation

  I just bought Sony Bravia KDL40S5100 tv. The VGA input is acting weird. I have a Gateway desktop with Windows 7 and Intel 945 graphics. I also have a laptop running Ubuntu 9.04. The TV will not display the gateway when the resolution is over 1360x768, I have to wait for it to time out and bring me back. The Intel driver even urges me to switch to the "recommended" 1920x1080. I just installed Win7 using this tv as the monitor. When the orginial welcome screen started after setup, it started me at 1080. I had to start in safemode to set a res that would work! When I plug my laptop into the TV, 1920x1080 works just fine. Any ideas? This laptop also has Win7, which I am going to try, but I haven't gotten a chance yet.

  Read the article

• Can't open Control Panel or IE

  - by Josh

  I have a XP computer where when ever I try to open Control Panel nothing happens, nothing flashes on the screen. Same thing with Internet Explorer. I've scanned the computer with Malwarebytes and Avast, Malwaresbytes found some Adware which it removed without problems. Avast found nothing. I looked at the running processes with Process Explorer, nothing malicious running. And looked at a Process Monitor output when I tried to run IE, nothing obviously wrong. The process just decides to exit. What can I try next? I would suspect corrupt IE install but Control Panel doesn't work either. UPDATE: Nether work in Safe Mode under the user account. (only 1 user on the computer) But in Safe Mode, under the built in Administrator account, they work. So what ever is broken, is only broken in the one account. Anything under the HKCU registry key that could break this?

  Read the article

• Cascading KVM switches

  - by einpoklum

  I have a not-so-small number of computers (say, 5) which I want to access with a single keyboard, USB and monitor. I can get an 8-port KVM switch, which is a pretty expensive piece of hardware; however, in theory, I should be able to cascade KVM switches: Have one 4-port KVM switch between 2 other KVMs (a 2-port and a 4-port). Is this doable (with typical off-the-shelf switches and cables)? Has anyone had experience doing this? Note: I'm interested in USB-only for the keyboard and mouse, and either VGA or DVI for the display. Audio and PS/2 connections are irrelevant for me..

  Read the article

• GRUB2 Boot Configuration

  - by MA1

  Recently i installed GRUB2, everything is working fine. When my system is started my monitor is showing something like the following "Minimal BASH-Like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename." Press "Esc" key to enter the menu. Boot windows... and when i press the Esc key it then shows the GRUB2 menu showing list of operating systems installed on my system How the remove "Minimal BASH-Like line editing ...." text. I only need this line Press "Esc" key to enter the menu. Boot windows... Note: Both my WindowsXP and Fedora12 are working fine and loading with no problem.

  Read the article

• Can't see progress of rolling back SPID with KILL WITH STATUSONLY

  - by BradC

  I have a SPID on SQL 2005 that shows in Activity Monitor as "ROLLBACK" mode (because a transaction log filled up, not because it was manually killed). I tried to see how much time it has left to roll back with a KILL 115 WITH STATUSONLY but it just said "Status report cannot be obtained. Rollback operation for Process ID 115 is not in progress." Can I safely issue a "KILL 115" so that I can see the rollback status? Does this actually do anything on a spid currently in rollback?

  Read the article

• PC powers up but there is no display

  - by Matthew

  I built a computer with standard components I bought from Newegg about three years ago. It ran great for 2 years and has sat powered down for the last year. I tried to power it up today and the display was blank. It powers up, lights come on, drives start spinning but there is nothing on the display. I verified that the monitor and video adapter work. I also tried the video adapter in a different slot on the mother board with no luck. What's the next thing I should try? Is the mother board shot? Thanks.

  Read the article

• I want to replace a number with successive numbers, starting at 1 and going up.

  - by Pär-Magnus Green

  I'm aware that this is something people can easily program, but I'm not familiar with those things, so I was hoping there was an easier solution. I've edited a large database of questions, including sorting, and ended up getting all the question ID's mixed up. I'm trying to do this in Notepad++, but any other suggestions are welcome. I'm wondering if there's a way to search for a string (ex. "Question[any number]") and replace the numbers with first 1, then 2, et.c. For clarification, this is how one question looks like: TriviaBot_Questions[3]['Question'][63] = "Acronyms: What does WTT stand for?"; TriviaBot_Questions[3]['Answers'][63] = {"Want To Trade"}; TriviaBot_Questions[3]['Category'][63] = 7; TriviaBot_Questions[3]['Points'][63] = 1; TriviaBot_Questions[3]['Hints'][63] = {}; and the next question, as is now, is not followed by 64. It might be 245 or 1029, and regardless of which number it is, I want it replaced with "previous number + 1", basically.

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >