Search Results

Search found 68614 results on 2745 pages for 'full set arguments'.

Page 193/2745 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Power supply issue? New Radeon5850's fan runs at full speed and PC doesn't boot.

  - by Kris

  I recently bought a new ASUS EAH5850 graphics board. I installed it a custom PC which had an ASUS p5n-e SLI mobo along with a 500w Thermaltake W0093RU power supply. Sometimes when doing a cold boot the 5850's fan will run at full speed and the PC will not boot. Powering off by holding down the power button and powering back on sometimes remedies the situation and everything boots normally. Warm reboots also never seem to have problems. For some reason though cold boots almost always do. Another issue I notice is that when the PC does boot normally it takes longer (+30 secs) to POST than with my last video card. I flashed the mobo with the latest available BIOS but it had no effect. Is my problem a power issue or incompatible motherboard or something else I'm missing?

  Read the article

• centos 100% disk full - How to remove log files, history, etc?

  - by kopeklan

  mysqld won't start because disk space is full: 101221 14:06:50 [ERROR] /usr/libexec/mysqld: Error writing file '/var/run/mysqld/mysqld.pid' (Errcode: 28) 101221 14:06:50 [ERROR] Can't start server: can't create PID file: No space left on device running df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda2 16G 3.2G 12G 23% / /dev/sda5 4.8G 4.6G 0 100% /var /dev/sda3 430G 855M 407G 1% /home /dev/sda1 76M 24M 49M 33% /boot tmpfs 956M 0 956M 0% /dev/shm du -sh * in /var: 12K account 56M cache 24K db 32K empty 8.0K games 1.5G lib 8.0K local 32K lock 221M log 16K lost+found 0 mail 24K named 8.0K nis 8.0K opt 8.0K preserve 8.0K racoon 292K run 70M spool 8.0K tmp 76K webmin 2.6G www 20K yp in /dev/sda5, there is website files in /var/www. because this is first time, I have no idea which files to remove other than moving /var/www to other partition And one more, what is the right way to remove log files, history, etc in /dev/sda5?

  Read the article

• How to get full write permission on my second drive after dual boot?

  - by Shaul

  I had a WinXP installation on my hard drive. Then I bought a 2nd drive and installed Win7. Dual boot working fine. But when I'm in the Win7 environment, it appears that I don't have full admin permission on the "D" drive (that's the drive with WinXP). Even though the user I'm logged in as has admin permissions, I have to run my apps with administrator privileges in order to get write access to the D drive. This is not the case when I do stuff on the C drive. I could just get into running those apps that access the D drive in admin mode, but that seems like overkill. Is there some secret switch I can flip so that my D drive acts like my C drive, security-wise?

  Read the article

• Count the Number of Characters in a Full FIle Path?

  - by Richie086

  I need to be able to count the number of characters in a full path to a file in windows. How I am currently accomplishing this task is as follows: Open a command prompt cd to the directory in question (for example c:\CruiseControl\ProjectArtifacts\ProjectName) type the following command dir /s /b output.csv Open the resulting output.csv file in excel. use the =LEN() function in excel to count the number of characters per row as listed in the output.csv file. Does anyone know of an explorer shell extension, or some 3rd party tool that could preform this function without me having to manipulate the output from dir in excel? Is there some easier way to go about doing this? The root of the issue I am having is the ~260 character file path limit in Windows. I am trying to analyze which paths are approx ~260 characters so I can shorten them to avoid getting this error.

  Read the article

• When HDD becomes full, how to create a symbolic link to the data store on another disk?

  - by Brij Raj Singh

  I have a Linux Ubuntu machine which has an X GB hard disk. There is folder, say, /opt/software/data. The disk /dev/sda1 is almost full and I have attached another disk at /dev/sda2 which is mounted at /hdd2. Is it possible for me to link the folders /opt/software/data with /hdd2/software/data so, that every file get stored in the /hdd2/software/data but may be referred from the /opt/software/data? I can't do a reinstall of the software that creates this data, to change the default location of storage.

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• How do I restore a SQL Server database from last night's full backup and the active transaction log file?

  - by Dylan Beattie

  I have been told that it's good practise to keep your SQL Server data files and log files on physically separate disks, because it'll allow you to recover your data to the point of failure if the data drive fails. So... let's say that mydata.mdf is on drive D:, and my mydata_log.ldf is on drive E:, and it's 16:45, and drive D: has just died horribly. So - I have last night's full backup (mydata.bak). I have hourly transaction-log backups that will bring the data back up to 16:00... but that means I'll lose 45 minutes worth of updates. I still have mydata_log.ldf on the E: drive, which should contain EVERY transaction that was committed right up to the point where the drive failed. How do I go about recreating the database and restoring data from the backup file and the live transaction log, so I don't lose any updates? Is this possible?

  Read the article

• How to find full/real email address from Lotus Notes?

  - by DA

  Is there any way to get the full set of email addresses? Example: I receive an email sent to a Lotus group 'all department employees'. I'd like to be able to grab the actual email addresses contained within (not their Lotus user name) so that I could email everyone from a client other than Lotus. Does such an option exist? I believe this was doable in Exchange with a right-click and 'expand nickname' type of action. I'm on a Mac.

  Read the article

• How feasible is it to setup a FreeNAS to be more like a full install of FreeBSD

  - by mmccoo

  So I've been playing with FreeNAS over the last week, finally trying to get my act together and store my important files properly. I'm finding myself wanting to install and compile additional packages. pkg_add has been great for some things, but it appears that my install is rather crippled. make is missing. I installed gmake and linked make to that. math.h is missing as is sys/cdefs.h I thought these are part of any core unix/linux system? cc is missing though I've installed gcc45. I'm used to having just gcc. Sure I can create a link, but I'm not sure this is the proper thing to do. perl installed fine, but I can't add stuff with cpan. This is how I discovered 1,2, and 3. So my question is this: do I just need to bite the bullet and install a full FreeBSD? The web interface to FreeNAS is kinda nice

  Read the article

• LAN full of public ipv4 addresses - How to filter it?

  - by sparc86

  The answer to my question maybe is not that hard but anyways, I do not know what to do. So, I just got in a new job in a Univerisity and I found out that the network (the LAN) is full of public IP addresses. Seriously, the whole LAN (probably more than 150 hosts) has it' own internet IP address and I don't know how to manage it. I have a very good experience using iptables (Linux firewall) in a NAT'ed environment. But then how should I proceed in an environment where all my LAN is working with a bunch of public IP addresses? Should I just use the "forward" rules and ignore the NAT rules or is there any other issue in such environment which I should take care? Can I add a firewall between the router and the LAN in order to produce packet filtering for these public IP addresses in my LAN or will this just not work? Thanks!

  Read the article

• How to avoid specifying full path in sudoers file?

  - by s g

  I am trying to add a NOPASSWD entry for sudotest.sh (or any script/binary that requires sudo) in my /etc/sudoers file (on Ubuntu 12.04 LTS server), but in order to make it work, I must specify the full path. The following entry works just fine: %jenkins ALL=(ALL)NOPASSWD:/home/vts_share/test/sudotest.sh The problem is that the script might move to a different directory. This seems like a great chance to use the * wildcard in the path (i.e. /*/sudotest.sh) so that my script could be in any directory but the manual states that wildcards will not match the / character when used in a path. I've confirmed that it doesn't work. I know that I can use the word ALL in place of my script, but this means there is no password prompt for any commands which seems unsafe. How do I solve this?

  Read the article

• Is there a name for a testing method where you compare a set of very different designs?

  - by DVK

  "A/B testing" is defined as "a method of marketing testing by which a baseline control sample is compared to a variety of single-variable test samples in order to improve response rates". The point here, of course, is to know which small single-variable changes are more optimal, with the goal of finding the local optimum. However, one can also envision a somewhat related but different scenario for testing the response rate of major re-designs: take a baseline control design, take one or more completely different designs, and run test samples on those redesigns to compare response rates. As a practical but contrived example, imagine testing a set of designs for the same website, one being minimalist "googly" design, one being cluttered "Amazony" design, and one being an artsy "designy" design (e.g. maximum use of design elements unlike Google but minimal simultaneously presented information, like Google but unlike Amazon) Is there an official name for such testing? It's definitely not A/B testing, since the main component of it (finding local optimum by testing single-variable small changes that can be attributed to response shift) is not present. This is more about trying to compare a set of local optimums, and compare to see which one works better as a global optimum. It's not a multivriable, A/B/N or any other such testing since you don't really have specific variables that can be attributed, just different designs.

  Read the article

• How do I properly set up and secure a production LAMP Server?

  - by Niklas

  It's very hard to find comprehensive information on this subject. Either I found short tutorials on how you perform the installation, as simple as "apt-get install apache2", or outdated tutorials. So I was hoping I could get some professional information from my fellow members of the Ubuntu community :D I have performed a normal Ubuntu Server 11.04 with LAMP, SAMBA and SSH installed through the system installation. But I'm having some trouble setting up virtual hosts and to make the system secure enough to expose the server to the web. I've somewhat followed this tutorial this far. I have 3 sites in /etc/apache2/sites-available which all looks like this except for different site names: <VirtualHost example.com> ServerAdmin webmaster@localhost ServerAlias www.edunder.se DocumentRoot /var/www/sites/example CustomLog /var/log/apache2/www.example.com-access.log combined </VirtualHost> And I have enabled them with the command a2ensite so I have symbolic links in /etc/apache2/sites-enabled. My /etc/hosts file has these lines: 127.0.0.1 localhost 127.0.1.1 Ubuntu.lan Ubuntu 127.0.0.1 localhost.localdomain localhost example.com www.example.com 127.0.0.1 localhost.localdomain localhost example2.com www.example2.com 127.0.0.1 localhost.localdomain localhost example3.com www.example3.com And I can only access one of them from the browser (I have lynx installed on the server for testing purposes) so I guess I haven't set them up properly :) How should I proceed to get a secure and proper setup? I also use MySQL and I think that this tutorial will be enough to set up SSH securely. Please help me understanding Apache configuration better since I'm new to setting up my own server (I've only run XAMPP earlier) and please advise regarding how I should setup a firewall as well :D

  Read the article

• How to Set Ubuntu 12.04 to it's factory settings like when u first installed it?

  - by Cameron

  Well, this is a simple answered question, from the title, but my real problem is hard af. I have set ubuntu to use root, then it wouldn't let me log into the admin account only root and guest I deleted the admin account, remade another, then attempted to disable root account. This failed - I messed up the password, the original password was "root" I also didn't set a password for my new admin account, so It says it has one, whats the default password for it? I can't moderate my ubuntu system at all now. I have tried to drop to cmd shell thing, it asks for the root password, i type 'root' and any other possible passwords, it doesn't work. To reset ubuntu to factory settings i have found that i could enter the following code: sudo dpkg-reconfigure -phigh -a sudo Requires admin password, that I cant find out without root password and I don;t know. My goal is to try to fix this without remaking a bootable usb for ubuntu, because I lost the one i made for this. so If i can't, please say so. If you can help thanks!

  Read the article

• How to build Gantt chart from a set of Redmine tickets without filling dates in all of them?

  - by Alexander Gladysh

  Redmine 1.1.1 I've created a set of tickets for a new project. In each issue I filled Subject, Description and Estimated time fields. I also filled blocks/blocked by dependencies in Related issues. But the Gantt chart for this project is empty (that is, it contains all the tasks, but does not contain any "bars" for them). I need to get a Gantt chart (or any other visual representation) to show to other project members. I'd hate to type all that information again into OpenProj. Is there a way to get a serviceable Gantt chart from the Redmine? Update: In the answers below I read that to get working Gantt chart I have to input start date and due date manually for each issue. I believe that this information should be inferred automatically from start date of first ticket (first — depenency-wise), estimated time of each ticket, dependency graph, resource assignment and working hours calendar. Just as it happens in any minimally sane Gantt chart project management tool. To enter this information by hand and to keep it up-to-date manually as the project evolves is insane waste of time. Is there a way to generate Gantt chart from the set of Redmine tickets without filling in all this information manually? (Solutions involving data export + import in sane tool or involving existing plugins are perfectly acceptable.)

  Read the article

• How do I set up a proxy server in Xubuntu?

  - by Dolphin

  NOTICE: I am completely allowed to do this. This is not meant for accessing sites I am not supposed to go on I know that most threads with "Proxy" in the title have to do with getting to sites they're not supposed to go on. I hope that I can get this to be as easy as possible. I hope it can be as easy as setting up an OpenSSH server. What happened My dad has just screwed something up in our router settings, and I can't access Google anymore because if it. I need to be able to access Google. He doesn't like me in the router because he thinks I will make it worse. (I am sick of Bing and Yahoo) So I want to set up a proxy server that will allow me to work around what he screwed up. What I want to do I want to host it on a computer in my grandpa's house, and access it with my computer at my dad's house. It's running Xubuntu. I want it to work with the Mozilla Firefox on my computer at my dad's house running Ubuntu 11.10. How can I set this up? This is only temporary until he fixes whatever he did.

  Read the article

• How to optimize calls to multiple APIs at once and return as one set?

  - by Martin

  I have a web app that searches across 2 APIs right now. I have my own Restful web service that I call, and it does all the work on the backend to asynchronously call the 2 APIs and concatenate them into one result set for my web app to use. I want to scale this out and add as many other APIs as I can (currently looking at about 10 more). But as I add APIs, the call to my service gets (potentially) slower and more complex. How do I handle one API not responding ... and other issues that arise? What would be the best way to approach this? Should I create a service call for each API, that way each one is independent and not coupled to all the other calls? Is there a way on the backend to handle the multiple API calls without all the extra complexity it adds? If I go the route of a service call per API, now my client code gets more complex (and I have a lot of clients)? And it's more work for the client, and since I have mobile apps, it will cost the client more data usage. If I go one service call, is there a way to set up some sort of connection so I can return data as I get it, in case one service call hangs?

  Read the article

• How to set permalink of your blog post according to date and title of post?

  - by Amit

  I am having this website http://www.finalyearondesk.com . My blogs post link are set like this.. http://www.finalyearondesk.com/index.php?id=28 . I want it to set like this ... finalyearondesk.com/2011/09/22/how-to-recover-ubuntu-after-it-is-crashed/ . I am using the following function to get these posts... function get_content($id = '') { if($id != ""): $id = mysql_real_escape_string($id); $sql = "SELECT * from blog WHERE id = '$id'"; $return = '<p><a href="http://www.finalyearondesk.com/">Go back to Home page</a></p>'; echo $return; else: $sql = "select * from blog ORDER BY id DESC"; endif; $res = mysql_query($sql) or die(mysql_error()); if(mysql_num_rows($res) != 0): while($row = mysql_fetch_assoc($res)) { echo '<h1><a href="index.php?id=' . $row['id'] . '">' . $row['title'] . '</a></h1>'; echo '<p>' . "By: " . '<font color="orange">' . $row['author'] . '</font>' . ", Posted on: " . $row['date'] . '<p>'; echo '<p>' . $row['body'] . '</p><br />'; } else: echo '<p>We are really very sorry, this page does not exist!</p>'; endif; } Any suggestions how to do this? And can we do this by using .htaccess?

  Read the article

• How to set individual NTFS partitions permissions behaviour for each user account?

  - by ryniek

  I have two NTFS partitions (DOWNLOADS for downloaded files and VM for my VirtualBox .vdi file) for which i must have full permissions for my allday use account. They should be also automounting when i login to this account. But i've also set Guest account for guests. For Guest account, i want make VM partition fully disabled and invisible (and thus it mustn't automount) but DOWNLOADS partition should be shared with limited privileges with Guest account. Editing fstab i'm able to share DOWNLOADS partition with Guest on limited privileges but VM can be only set to limited and have disabled automounting - so guest can't mount it but it still can be seen in Nautilus, plus I must always mount it manually when i login to allday account. Is there some trick to make what i want? Here's my fstab config: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda1 : UUID=35e66658-5ee9-40cf-bf56-8204959e3df0 / xfs defaults 01 #Entry for /dev/sda2 : UUID=26c714cf-4236-45e7-9c46-cfcf91a215ae /home xfs defaults 02 #Entry for /dev/sda5 : UUID=1315BCB027C44639 /media/DOWNLOADS ntfs-3g auto,uid=1000,gid=1000,umask=0022,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda6 : UUID=60FF39EB72B72264 /media/VM ntfs noauto,uid=1000,gid=1000,umask=0077,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda7 : UUID=c52411f5-105c-45d1-971f-412f962c350e none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks

  Read the article

• What is meant by "no password set" for root account (and otthers)?

  - by MMA

  Several years back, we were more accustomed to changing to the root account using the su command. First, we switched to the root account, and then executed those root commands. Now we are more accustomed to using the sudo command. But we know that the root account is there. We can readily find the home directory of user root. $ ls -ld /root/ drwx------ 18 root root 4096 Oct 22 17:21 /root/ Now my point is, it is stated that "the root password in Ubuntu is left unset". Please see the answers to this question. Most of the answers have something to this effect in the first paragraph. One or two answers further state that "the account is left disabled". Now my (primary) questions are, What is meant by an unset password? Is it blank? Is it null? Or something else more cryptic? How does the account becomes enabled once I set password for it? (sudo password root) In order get a better understanding, I checked the /etc/shadow file. Since I have already set a password for the root account, I can no longer see what is there (encrypted password). So, I created another account and left it disabled. The corresponding entry in the /etc/shadow file is, testpassword:!:16020:0:99999:7::: Now perhaps my above queries need to be changed to, what does an ! in password field mean? Other encrypted passwords are those very long cryptic strings. How come this encrypted form is only one character long? And does an account become disabled if I put an ! in the (encrypted) password field?

  Read the article

• Why won't Webmaster Tools let me set a preferred domain? (says to verify, but it should already be)

  - by Su'

  I've got a domain that I apparently forgot to set a preferred domain for, so I just tried to do it. Webmaster Tools instead popped up a little box: Part of the process of setting a preferred domain is to verify that you own http://www.example.com/. Please verify http://www.example.com/. I'm running into some problems following these instructions: As far as I can tell I already did verify sometime in the past. There's a TXT DNS record with the gibberish Google tells you to set for it that I couldn't have come up with myself. …and nothing is telling me this information is bad. So let's assume the site is somehow not actually verified. All the various methods' instructions start with "click the Manage Site button next to the site you want, and then click Verify this site." That button doesn't even exist on my screens. (It presumably goes away when you successfully verify?) Those instructions were all updated pretty recently, and the DNS one in particular just a couple weeks ago so it seems a bit unlikely they're inaccurate. I am not using Apps, and won't be, so can't try out the verification through there. Note that I also have another domain that I have not done any verification for which is showing the same behavior(no such button, being told to verify when it seems impossible etc.) so something appears to just be broken. I already have a no-www process in place server-side, so we can skip that. I'm just trying to get the box checked off in GWT. If I don't get any resolution, I'll eventually scrap the TXT record and see if the site gets un-verified(or whatever since it thinks it isn't), and see if I can just restart the process. It's not urgent so I'm just trying to figure out if I've gone blind to something or what. Did the button move?

  Read the article

• How can I Include Multiples Tables in my linq to entities eager loading using mvc4 C#

  - by EBENEZER CURVELLO

  I have 6 classes and I try to use linq to Entities to get the SiglaUF information of the last deeper table (in the view - MVC). The problem is I receive the following error: "The ObjectContext instance has been disposed and can no longer be used for operations that require a connection." The view is like that: > @model IEnumerable<DiskPizzaDelivery.Models.EnderecoCliente> > @foreach (var item in Model) { > @Html.DisplayFor(modelItem => item.CEP.Cidade.UF.SiglaUF) > } The query that i use: var cliente = context.Clientes .Include(e => e.Enderecos) .Include(e1 => e1.Enderecos.Select(cep => cep.CEP)) .SingleOrDefault(); The question is: How Can I improve this query to pre loading (eager loading) "Cidade" and "UF"? See below the classes: public partial class Cliente { [Key] [DatabaseGeneratedAttribute(DatabaseGeneratedOption.Identity)] public int IdCliente { get; set; } public string Email { get; set; } public string Senha { get; set; } public virtual ICollection<EnderecoCliente> Enderecos { get; set; } } public partial class EnderecoCliente { public int IdEndereco { get; set; } public int IdCliente { get; set; } public string CEPEndereco { get; set; } public string Numero { get; set; } public string Complemento { get; set; } public string PontoReferencia { get; set; } public virtual Cliente Cliente { get; set; } public virtual CEP CEP { get; set; } } public partial class CEP { public string CodCep { get; set; } public string Tipo_Logradouro { get; set; } public string Logradouro { get; set; } public string Bairro { get; set; } public int CodigoUF { get; set; } public int CodigoCidade { get; set; } public virtual Cidade Cidade { get; set; } } public partial class Cidade { public int CodigoCidade { get; set; } public string NomeCidade { get; set; } public int CodigoUF { get; set; } public virtual ICollection<CEP> CEPs { get; set; } public virtual UF UF { get; set; } public virtual ICollection<UF> UFs { get; set; } } public partial class UF { public int CodigoUF { get; set; } public string SiglaUF { get; set; } public string NomeUF { get; set; } public int CodigoCidadeCapital { get; set; } public virtual ICollection<Cidade> Cidades { get; set; } public virtual Cidade Cidade { get; set; } } var cliente = context.Clientes .Where(c => c.Email == email) .Where(c => c.Senha == senha) .Include(e => e.Enderecos) .Include(e1 => e1.Enderecos.Select(cep => cep.CEP)) .SingleOrDefault(); Thanks!

  Read the article

• How can I set my screen resolution to match my TV?

  - by Scott Severance

  I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

  Read the article

• Battery life starts at 2:30 hrs (99%), but less than 1 minute later is only 1:30 hrs (99%)

  - by zondu

  After searching this and other forums, I haven't seen this same issue listed anywhere for Ubuntu 12. Prior to installing Ubuntu 12.10, my Netbook (Acer AspireOne D250, SATA HDD) was consistently getting 2:30-3 hrs battery life under Windows XP Home, SP3. However, immediately after installing Ubuntu 12.10, the battery life starts out at 2:30 hrs (99%), but less than 1 minute later suddenly drops to 1:30 hrs (99%), which seems very odd. It could be a complete coincidence that the battery is suddenly flaky at the exact same moment that Ubuntu 12.10 was installed, but that doesn't seem likely. I'm a newbie to Ubuntu, so I don't have much experience tweaking/trouble-shooting yet. Here's what I've tried so far: enabled laptop mode (sudo su, then echo 5 /proc/sys/vm/laptop_mode) and checked that it is running when the A/C adapter is unplugged, but it doesn't seem to have made any noticeable difference in battery life, installed Jupiter, but it didn't work and messed up the system, so I had to uninstall it, disabled bluetooth (wifi is still on b/c it is necessary), set the screen to lowest brightness, etc., run through at least 1 full power cycle (running until the netbook shut itself off due to critical battery) and have been using it normally (sometimes plugged in, often unplugged until the battery gets very low) for a week since installing Ubuntu 12.10. installed powertop, but have no idea how to interpret its results. Here are the results of acpi -b: w/ A/C adapter: Battery 0: Full, 100% immediately after unplugging: Battery 0: Discharging, 99%, 02:30:20 remaining 1 minute after unplugging: Battery 0: Discharging, 99%, 01:37:49 remaining 2-3 minutes after unplugging: Battery 0: Discharging, 95%, 01:33:01 remaining 10 minutes after unplugging: Battery 0: Discharging, 85%, 01:13:38 remaining Results of cat /sys/class/power_supply/BAT0/uevent: w/ A/C adapter: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Full POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=12136000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1956000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= immediately after unplugging: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11886000 POWER_SUPPLY_CURRENT_NOW=773000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 1 minute later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11728000 POWER_SUPPLY_CURRENT_NOW=1174000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1937000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 2-3 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11583000 POWER_SUPPLY_CURRENT_NOW=1209000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1878000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= 10 minutes later: POWER_SUPPLY_NAME=BAT0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_VOLTAGE_MIN_DESIGN=10800000 POWER_SUPPLY_VOLTAGE_NOW=11230000 POWER_SUPPLY_CURRENT_NOW=1239000 POWER_SUPPLY_CHARGE_FULL_DESIGN=4500000 POWER_SUPPLY_CHARGE_FULL=1956000 POWER_SUPPLY_CHARGE_NOW=1644000 POWER_SUPPLY_MODEL_NAME=UM08B32 POWER_SUPPLY_MANUFACTURER=SANYO POWER_SUPPLY_SERIAL_NUMBER= Results of upower -i /org/freedesktop/UPower/devices/battery_BAT0: w/ A/C adapter: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:24:58 2012 (823 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 21.1248 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 12.173 V percentage: 100% capacity: 43.4667% technology: lithium-ion immediately after unplugging: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:41:25 2012 (1 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 8.3484 W voltage: 11.86 V time to empty: 2.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging 1 minute later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:42:31 2012 (17 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.9196 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.5432 W voltage: 11.753 V time to empty: 1.5 hours percentage: 99.0286% capacity: 43.4667% technology: lithium-ion History (charge): 1354023683 99.029 discharging History (rate): 1354023751 13.543 discharging 2-3 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:45:06 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 20.2824 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.7484 W voltage: 11.545 V time to empty: 1.5 hours percentage: 96.0123% capacity: 43.4667% technology: lithium-ion History (charge): 1354023906 96.012 discharging 1354023844 97.035 discharging History (rate): 1354023906 13.748 discharging 1354023875 12.992 discharging 1354023844 13.284 discharging 10 minutes later: native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0A:00/power_supply/BAT0 vendor: SANYO model: UM08B32 power supply: yes updated: Tue Nov 27 15:54:24 2012 (28 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging energy: 18.1764 Wh energy-empty: 0 Wh energy-full: 21.1248 Wh energy-full-design: 48.6 Wh energy-rate: 13.2948 W voltage: 11.268 V time to empty: 1.4 hours percentage: 86.0429% capacity: 43.4667% technology: lithium-ion History (charge): 1354024433 86.043 discharging History (rate): 1354024464 13.295 discharging 1354024433 13.662 discharging 1354024402 13.781 discharging I noticed that between #2 and #3 (0 and 1 minutes after unplugging), while the battery still reports 99% charge and drops from 2:30 hr to 1:30 hr, the energy usage goes from 8.34 W to 13.54 W and the current_now increases, but shouldn't it be using less energy in battery mode since the screen is much dimmer and it's in power saving mode? (or is that normal behavior?) It also seems to drain more quickly than what it predicts, especially with the 1-1.25 hour drop in the first minute of being unplugged, which seems odd. What really concerns me is that Ubuntu 12.10 may not be properly managing the battery (with the sudden change in charge/life from 2:30 to 1:30 or 1:15 within a minute of unplugging), and that a new battery may quickly die under Ubuntu 12.10. I'd greatly appreciate any advice/suggestions on what to do, and especially whether there's a way to get back the 1-1.5 hrs of battery life that were suddenly lost when changing from WinXp to Ubuntu 12.10. Thanks :)

  Read the article

• Bypass cache for mobile user agents, VARNISH+NGINX+W3CACHE

  - by Mike McGhee

  Right now I'm running Wordpress w/ W3 Cache on nginx with varnish front end. I'm trying to use the WP Touch Pro plugin for wordpress to display mobile sites, but it is not working. Shows the desktop theme still. I've put the mobile user agents in the rejected user agents box in w3 cache. Here is the nginx config w3 cache spit out: BEGIN W3TC Page Cache cache location ~ /wp-content/w3tc/pgcache.*html$ { expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; } location ~ /wp-content/w3tc/pgcache.*gzip$ { gzip off; types {} default_type text/html; expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; add_header Content-Encoding gzip; } # END W3TC Page Cache cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Page Cache core rewrite ^(.*\/)?w3tc_rewrite_test$ $1?w3tc_rewrite_test=1 last; set $w3tc_rewrite 1; if ($request_method = POST) { set $w3tc_rewrite 0; } if ($query_string != "") { set $w3tc_rewrite 0; } if ($http_host != "mysite.com") { set $w3tc_rewrite 0; } set $w3tc_rewrite2 1; if ($request_uri !~ \/$) { set $w3tc_rewrite2 0; } if ($request_uri ~* "(sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { set $w3tc_rewrite2 1; } if ($w3tc_rewrite2 != 1) { set $w3tc_rewrite 0; } set $w3tc_rewrite3 1; if ($request_uri ~* "(\/wp-admin\/|\/xmlrpc.php|\/wp-(app|cron|login|register|mail)\.php|\/feed\/|wp-.*\.php|index\.php)") { set $w3tc_rewrite3 0; } if ($request_uri ~* "(wp\-comments\-popup\.php|wp\-links\-opml\.php|wp\-locations\.php)") { set $w3tc_rewrite3 1; } if ($w3tc_rewrite3 != 1) { set $w3tc_rewrite 0; } if ($http_cookie ~* "(comment_author|wp\-postpass|wordpress_\[a\-f0\-9\]\+|wordpress_logged_in)") { set $w3tc_rewrite 0; } if ($http_user_agent ~* "(W3\ Total\ Cache/0\.9\.2\.4|iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry9500|blackberry9520|blackberry9530|blackberry9550|blackberry\ 9800|blackberry\ 9780|webos|s8000|bada)") { set $w3tc_rewrite 0; } set $w3tc_ua ""; if ($http_user_agent ~* "(acer\ s100|android|archos5|blackberry9500|blackberry9530|blackberry9550|blackberry\ 9800|cupcake|docomo\ ht\-03a|dream|htc\ hero|htc\ magic|htc_dream|htc_magic|incognito|ipad|iphone|ipod|kindle|lg\-gw620|liquid\ build|maemo|mot\-mb200|mot\-mb300|nexus\ one|opera\ mini|samsung\-s8000|series60.*webkit|series60/5\.0|sonyericssone10|sonyericssonu20|sonyericssonx10|t\-mobile\ mytouch\ 3g|t\-mobile\ opal|tattoo|webmate|webos)") { set $w3tc_ua _high; } set $w3tc_ref ""; set $w3tc_ssl ""; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc _gzip; } set $w3tc_ext ""; if (-f "$document_root/wp-content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl.html$w3tc_enc") { set $w3tc_ext .html; } if ($w3tc_ext = "") { set $w3tc_rewrite 0; } if ($w3tc_rewrite = 1) { rewrite .* "/wp- content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl$w3tc_ext$w3tc_enc" last; } # END W3TC Page Cache core And here is what I have in my varnish vcl.. sub vcl_recv { # Add a unique header containing the client address remove req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; # Device detection set req.http.X-Device = "desktop"; if ( req.http.User-Agent ~ "iP(hone|od|ad)" || req.http.User-Agent ~ "Android" ) { set req.http.X-Device = "smart"; } elseif ( req.http.User-Agent ~ "(SymbianOS|BlackBerry|SonyEricsson|Nokia|SAMSUNG|^LG)" ) { set req.http.X-Device = "cell"; } Any help is greatly appreciated, I've been banging my head against this for 2 days..

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >