Search Results

Search found 21057 results on 843 pages for 'video game consoles'.

Page 195/843 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

  • Nvidia driver on Windows 7 causing black screen

    - by inKit
    I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

    Read the article

  • Nvidia driver on Windows 7 causing black screen

    - by inKit
    I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

    Read the article

  • Why are my favorite websites becoming slower, over months?

    - by Wolfpack'08
    I spend a lot of my time at sites for watching online videos: youtube, gorillavid, thedailyshow.com etc. I used to watch the videos in full screen mode, and then that became very laggy. So, I started watching them with full-browser zooming. Then that became laggy. Recently, I've had to actually zoom out; otherwise, the video will lag so much that my PC locks. Could this be a symptom of my processor, RAM, or motherboard going bad? Has it, perhaps, anything to do with softwares like Chrome or the playeres the sites are using being updated?

    Read the article

  • Simple Architecture Verification

    - by Jean Carlos Suárez Marranzini
    I just made an architecture for an application with the function of scoring, saving and loading tennis games. The architecture has 2 kinds of elements: components & layers. Components: Standalone elements that can be consumed by other components or by layers. They might also consume functionality from the model/bottom layer. Layers: Software components whose functionality rests on previous layers (except for the model layer). -Layers: -Models: Data and it's behavior. -Controllers: A layer that allows interaction between the views and the models. -Views: The presentation layer for interacting with the user. -Components: -Persistence: Makes sure the game data can be stored away for later retrieval. -Time Machine: Records changes in the game through time so it's possible to navigate the game back and forth. -Settings: Contains the settings that determine how some of the game logic will apply. -Game Engine: Contains all the game logic, which it applies to the game data to determine the path the game should take. This is an image of the architecture (I don't have enough rep to post images): http://i49.tinypic.com/35lt5a9.png The requierements which this architecture should satisfy are the following: Save & load games. Move through game history and see how the scoreboard changes as the game evolves. Tie-breaks must be properly managed. Games must be classified by hit-type. Every point can be modified. Match name and player names must be stored. Game logic must be configurable by the user. I would really appreciate any kind of advice or comments on this architecture. To see if it is well built and makes sense as a whole. I took the idea from this link. http://en.wikipedia.org/wiki/Model%E2%80%93view%E2%80%93controller

    Read the article

  • Android Game Development. Async Task. Loading Bitmap Images Sounds

    - by user2534694
    Im working on this game for android. And wanted to know if my thread architecture was right or wrong. Basically, what is happening is, i am loading All the bitmaps,sounds etc in the initializevariables() method. But sometimes the game crashes and sometimes it doesnt. So i decided to use async task. But that doesnt seem to work either (i too loads at times and crashes at times) @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setFullScreen(); initializeVariables(); new initVariables().execute(); // setContentView(ourV); } private void setFullScreen() { requestWindowFeature(Window.FEATURE_NO_TITLE); getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN); getWindow().setFlags(WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON, WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON ); } private void initializeVariables() { ourV=new OurView(this); stats = getSharedPreferences(filename, 0); ballPic = BitmapFactory.decodeResource(getResources(), R.drawable.ball5); platform = BitmapFactory.decodeResource(getResources(), R.drawable.platform3); gameB = BitmapFactory.decodeResource(getResources(), R.drawable.game_back2); waves = BitmapFactory.decodeResource(getResources(), R.drawable.waves); play = BitmapFactory.decodeResource(getResources(), R.drawable.play_icon); pause = BitmapFactory.decodeResource(getResources(), R.drawable.pause_icon); platform2 = BitmapFactory.decodeResource(getResources(), R.drawable.platform4); countdown = BitmapFactory.decodeResource(getResources(), R.drawable.countdown); bubbles = BitmapFactory.decodeResource(getResources(), R.drawable.waves_bubbles); backgroundMusic = MediaPlayer.create(this, R.raw.music); jump = MediaPlayer.create(this, R.raw.jump); click = MediaPlayer.create(this, R.raw.jump_crack); sm = (SensorManager) getSystemService(SENSOR_SERVICE); acc = sm.getDefaultSensor(Sensor.TYPE_ACCELEROMETER); sm.registerListener(this, acc, SensorManager.SENSOR_DELAY_GAME); ourV.setOnTouchListener(this); dialog = new Dialog(this,android.R.style.Theme_Translucent_NoTitleBar_Fullscreen); dialog.setContentView(R.layout.pausescreen); dialog.hide(); dialog.setOnDismissListener(this); resume = (Button) dialog.findViewById(R.id.bContinue); menu = (Button) dialog.findViewById(R.id.bMainMenu); newTry = (Button) dialog.findViewById(R.id.bNewTry); tv_time = (TextView) dialog.findViewById(R.id.tv_time); tv_day = (TextView) dialog.findViewById(R.id.tv_day); tv_date = (TextView) dialog.findViewById(R.id.tv_date); resume.setOnClickListener(this); menu.setOnClickListener(this); newTry.setOnClickListener(this); } @Override protected void onResume() { //if its running the first time it goes in the brackets if(firstStart) { ourV.onResume(); firstStart=false; } } Now what onResume in ourV does is , its responsible for starting the thread //this is ourV.onResume public void onResume() { t=new Thread(this); isRunning=true; t.start(); } Now what I want is to initialise all bitmaps sounds etc in the async background method public class initVariables extends AsyncTask<Void, Integer, Void> { ProgressDialog pd; @Override protected void onPreExecute() { pd = new ProgressDialog(GameActivity.this); pd.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL); pd.setMax(100); pd.show(); } @Override protected Void doInBackground(Void... arg0) { synchronized (this) { for(int i=0;i<20;i++) { publishProgress(5); try { Thread.sleep(89); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } } return null; } @Override protected void onProgressUpdate(Integer... values) { pd.incrementProgressBy(values[0]); } @Override protected void onPostExecute(Void result) { pd.dismiss(); setContentView(ourV); } } Now since I am new to this. You could tellme maybe if async is not required for such stuff and there is another way of doing it normally.

    Read the article

  • I need help with 2D collision response (of stacking rotating polygons, with friction and gravity, for a game)

    - by Register Sole
    Hi I am looking for suggestions on how to write a collision response for game programming purpose (so not a scientific simulation). I am dealing with 2D polygons that are rotating, and I want them to be able to stack. I also want friction and gravity. I have a detection mechanism that returns the separating axis, how long the polygons are overlapping, and up to 2 points of contact. For the response, I am currently using an impulse-based response, which main idea is: find the separating axis, length of overlap, and the point of contact (if there are two, pick a random point between to simulate averaged force. i believe there are better ways than this) separate the object (modifying their positions, taking into account of their masses. i do not separate them completely though, to keep track that they are colliding to reduce jitter) calculate normal force based on the coefficient of restitution as if there is no friction. calculate friction, as if there is no normal force. I also assume that the direction of the friction is the same throughout the collision. apply the two forces (which result in a rather inaccurate result, since each force is calculated as if the other is not present. for non-rotating bodies though, this method is exact) I am aware that this method requires the coefficient of friction to be sufficiently small due to the assumption that the direction of friction stays the same in a collision. Also, the result is visually satisfying if gravity is not present. However, when there is gravity, objects on ground jitter and drift (even with zero coefficient of restitution)! It also happens for stacking objects. Larger coefficient of restitution and gravity increase the jittering. I hope you can help me with this. Some things i would like to know more about is how to handle collision with two point of contacts (how to end up having an object sitting still on the ground?), how to reduce, and prevent if possible, jitter and drift (do people use the most accurate method possible, or is there a trick to overcome this?), and how to handle multiple objects collision (for example, in the case of stacking objects, how do I check collisions between all of them and keep them all stable at every frame so they don't jitter?). A total reformulation of my algorithm is also welcomed, as long as it works. Another thing to note is that I am not making a Physics game, so I only need a visually satisfying response (though a realistic response is preferable, if it is not performance-heavy). But surely jittering and drifting objects on flat ground are not at all acceptable. In addition, I am a Physics student, so feel free to talk about impulse and whatever needed. Finally, I'm sorry for the long post. I tried to be as concise as I can. Thank you for reading it! EDIT It seems what I didn't manage to come up all this time is to separate resting contact as a class of its own and how to solve them. Currently reading the paper suggested by Jedediah. More suggestions on the topic are welcome :) CASE CLOSED After reading various papers referenced in the paper, successfully implemented simultaneous impulse method (referring to the original paper by Erin Catto, [Catt05]). Thanks maaaan!! The paper is wonderful. The current system is visibly much better than the previous. Still haven't separated resting contact as a class of its own though, which brings me to my next question. Love you all! Haha (sorry, I'm just so happy thanks to you).

    Read the article

  • FMS NetConnection.Connect.Close happening when starts and even in the middle of video in Flash with

    - by Sunil Kumar
    Hi I have developed a Flash Video player in Flash CS3 with Action Script 2.0 to play video from Adobe Flash Media Server 3.5. To play video from FMS 3.5, first I have to verify my swf file on FMS 3.5 server console so that it can be ensure that RTMP video URL only be play in verified SWF file. Right now I am facing problem of "NetConnection.Connect.Close" when I try to connect my NetConnection Object to FMS 3.5 to stream video from that server. So now I am getting this message "NetConnection.Connect.Close" from FMS 3.5. When this is happening in my office area at the same time when I am checking the the same video url from out side the office (With help of my friends who is in another office) area it is working fine. My friends naver faced even a single issue with NetConnection.Connect.Close. But in my office when I got message NetConnection.Connect.Close, I can play another streaming video very well like mtv.com jaman.com rajshri.com etc. Some time FMS works fine and video starts playing but in the middle of the video same thing happen "NetConnection.Connect.Close" There is no issue of Bandwidth in my office. I do't know why this is happening. Please see the message when I am getting "NetConnection.Connect.Close" message. NetConn == data: NetConn == objectEncoding: 0 NetConn == description: Connection succeeded. NetConn == code: NetConnection.Connect.Success NetConn == level: status NetConn == level: status NetConn == code: NetConnection.Connect.Closed Please help Thanks & regards Sunil Kumar

    Read the article

  • Why does use of H264 in sender/receiver pipelines introduce just HUGE delay?

    - by Serguey Zefirov
    When I try to create pipeline that uses H264 to transmit video, I get some enormous delay, up to 10 seconds to transmit video from my machine to... my machine! This is unacceptable for my goals and I'd like to consult StackOverflow over what I (or someone else) do wrong. I took pipelines from gstrtpbin documentation page and slightly modified them to use Speex: This is sender pipeline: #!/bin/sh gst-launch -v gstrtpbin name=rtpbin \ v4l2src ! ffmpegcolorspace ! ffenc_h263 ! rtph263ppay ! rtpbin.send_rtp_sink_0 \ rtpbin.send_rtp_src_0 ! udpsink host=127.0.0.1 port=5000 \ rtpbin.send_rtcp_src_0 ! udpsink host=127.0.0.1 port=5001 sync=false async=false \ udpsrc port=5005 ! rtpbin.recv_rtcp_sink_0 \ pulsesrc ! audioconvert ! audioresample ! audio/x-raw-int,rate=16000 ! \ speexenc bitrate=16000 ! rtpspeexpay ! rtpbin.send_rtp_sink_1 \ rtpbin.send_rtp_src_1 ! udpsink host=127.0.0.1 port=5002 \ rtpbin.send_rtcp_src_1 ! udpsink host=127.0.0.1 port=5003 sync=false async=false \ udpsrc port=5007 ! rtpbin.recv_rtcp_sink_1 Receiver pipeline: !/bin/sh gst-launch -v\ gstrtpbin name=rtpbin \ udpsrc caps="application/x-rtp,media=(string)video, clock-rate=(int)90000, encoding-name=(string)H263-1998" \ port=5000 ! rtpbin.recv_rtp_sink_0 \ rtpbin. ! rtph263pdepay ! ffdec_h263 ! xvimagesink \ udpsrc port=5001 ! rtpbin.recv_rtcp_sink_0 \ rtpbin.send_rtcp_src_0 ! udpsink port=5005 sync=false async=false \ udpsrc caps="application/x-rtp,media=(string)audio, clock-rate=(int)16000, encoding-name=(string)SPEEX, encoding-params=(string)1, payload=(int)110" \ port=5002 ! rtpbin.recv_rtp_sink_1 \ rtpbin. ! rtpspeexdepay ! speexdec ! audioresample ! audioconvert ! alsasink \ udpsrc port=5003 ! rtpbin.recv_rtcp_sink_1 \ rtpbin.send_rtcp_src_1 ! udpsink host=127.0.0.1 port=5007 sync=false async=false Those pipelines, a combination of H263 and Speex, work fine enough. I snap my fingers near camera and micropohne and then I see movement and hear sound at the same time. Then I changed pipelines to use H264 along the video path. The sender becomes: #!/bin/sh gst-launch -v gstrtpbin name=rtpbin \ v4l2src ! ffmpegcolorspace ! x264enc bitrate=300 ! rtph264pay ! rtpbin.send_rtp_sink_0 \ rtpbin.send_rtp_src_0 ! udpsink host=127.0.0.1 port=5000 \ rtpbin.send_rtcp_src_0 ! udpsink host=127.0.0.1 port=5001 sync=false async=false \ udpsrc port=5005 ! rtpbin.recv_rtcp_sink_0 \ pulsesrc ! audioconvert ! audioresample ! audio/x-raw-int,rate=16000 ! \ speexenc bitrate=16000 ! rtpspeexpay ! rtpbin.send_rtp_sink_1 \ rtpbin.send_rtp_src_1 ! udpsink host=127.0.0.1 port=5002 \ rtpbin.send_rtcp_src_1 ! udpsink host=127.0.0.1 port=5003 sync=false async=false \ udpsrc port=5007 ! rtpbin.recv_rtcp_sink_1 And receiver becomes: #!/bin/sh gst-launch -v\ gstrtpbin name=rtpbin \ udpsrc caps="application/x-rtp,media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264" \ port=5000 ! rtpbin.recv_rtp_sink_0 \ rtpbin. ! rtph264depay ! ffdec_h264 ! xvimagesink \ udpsrc port=5001 ! rtpbin.recv_rtcp_sink_0 \ rtpbin.send_rtcp_src_0 ! udpsink port=5005 sync=false async=false \ udpsrc caps="application/x-rtp,media=(string)audio, clock-rate=(int)16000, encoding-name=(string)SPEEX, encoding-params=(string)1, payload=(int)110" \ port=5002 ! rtpbin.recv_rtp_sink_1 \ rtpbin. ! rtpspeexdepay ! speexdec ! audioresample ! audioconvert ! alsasink \ udpsrc port=5003 ! rtpbin.recv_rtcp_sink_1 \ rtpbin.send_rtcp_src_1 ! udpsink host=127.0.0.1 port=5007 sync=false async=false This is what happen under Ubuntu 10.04. I didn't noticed such huge delays on Ubuntu 9.04 - the delays there was in range 2-3 seconds, AFAIR.

    Read the article

  • Does the Lenovo t60p vga port support an s-video signal?

    - by Matthijs Wessels
    I just bought a new television. The problem is it turns out it doesn't have a VGA port. It does have: s-video, component, hdmi and scart. My Lenovo t60p only has vga. If have search frantically for a solution and even though it seems I have sooo many options they are all dead ends. Or I keep ending up having to buy a 100 euro box to convert the signal. However, I found that some video cards support s-video through the vga port. It says look it up in your video cards documentation. I have a Lenovo t60p laptop with a ATI MOBILITY FireGl v5250. But I can't seem to get my hands on any documentation where this is supposed to be documented. I found this website: http://forum.notebookreview.com/showthread.php?t=179529&highlight=s-video There this guy says he thinks it's in the t60 but dropped in the t61, but suggests to the guy with the t60 that it won't work. I can't really conclude anything from that. Furthermore, I am not looking for the best of the best quality. So when I found this: *http://www.amazon.com/VideoSecu-Computor-Presentation-Converter-VGA2TV/dp/B000X3FAJU/ref=pd_cp_e_3_img I woudl be quite happy with this. Except that I don't think I can order it because I don't live in the US. Can anybody give me a definite answer, to whether the vga port of my lenovo t60p ati firegl v5250 supports s-video? So that I can just by a vga to s-video cable to achieve my goal.

    Read the article

  • Load order in XNA?

    - by marc wellman
    I am wondering whether the is a mechanism to manually control the call-order of void Game.LoadContent() as it is the case with void Game.Draw(GameTime gt) by setting int DrawableGameComponent.DrawOrder ? except the order that results from adding components to the Game.Components container and maybe there exists something similar with Game.Update(GameTime gt) ? UPDATE To exemplify my issue consider you have several game components which do depends to each other regarding their instantiation. All are inherited from DrawableGameComponent. Now suppose that in one of these components you are loading a Model from the games content pipeline and add it to some static container in order to provide access to it for other game components. public override LoadContent() { // ... Model m = _contentManager.Load<Model>(@"content/myModel"); // GameComponents is a static class with an accessible list where game components reside. GameComponents.AddCompnent(m); // ... } Now it's easy to imagine that this components load method has to precede other game components that do want to access the model m in their own load method.

    Read the article

  • Deferred rendering with both Clockwise and CounterClockwise culling

    - by user1423893
    I have a deferred rendering system that works well with objects that appear solid and drawn using CounterClockwise culling. I have a problem with Clockwise culled objects that are supposed to represent hollow that display their inside faces only. The image below shows a CounterClockwise culled object (left) Clockwise culled object (right). The Clockwise culled object faces display what would be displayed on the CounterClockwise face. How can I get the lighting to light the inner faces for Clockwise culled objects and continue lighting the outer CounterClockwise faces as normal? My lighting method is below private void DeferredLighting(GameTime gameTime) { // Set the render target for the lights game.GraphicsDevice.SetRenderTarget(lightMap); // Clear the render target to (0, 0, 0, 0) game.GraphicsDevice.Clear(Color.Transparent); // Set the render states game.GraphicsDevice.BlendState = BlendState.Additive; game.GraphicsDevice.DepthStencilState = DepthStencilState.None; game.GraphicsDevice.RasterizerState = RasterizerState.CullCounterClockwise; // Set sampler state to Point as the Surface type requires it in XNA 4.0 game.GraphicsDevice.SamplerStates[0] = SamplerState.PointClamp; // Set the camera properties for all lights BaseLight.SetCameraProperties(game.ActiveCamera); // Draw the lights int numLights = lights.Count; for (int i = 0; i < numLights; ++i) { if (lights[i].Diffuse.W > 0f) { lights[i].Render(gameTime, ref normalMap, ref depthMap, ref sgrMap); } } // Resolve the render target game.GraphicsDevice.SetRenderTarget(null); } I have tried adjusting the render states but no combination works for both objects.

    Read the article

  • Creating user UI using Flixel

    - by Jamie Read
    I am new to game development but familiar with programming languages. I have started using Flixel and have a working Breakout game with score and lives. What I am trying to do is add a Start Screen before actually loading the game. I have a create function that adds all the game elements to the stage: override public function create():void // all game elements { How can I add this pre-load Start Screen? I'm not sure if I have to add in the code to this create function or somewhere else and what code to actually add. Eventually I would also like to add saving, loading, options and upgrades too. So any advice with that would be great. Here is my main game.as: package { import org.flixel.*; public class Game extends FlxGame { private const resolution:FlxPoint = new FlxPoint(640, 480); private const zoom:uint = 2; private const fps:uint = 60; public function Game() { super(resolution.x / zoom, resolution.y / zoom, PlayState, zoom); FlxG.flashFramerate = fps; } } } Thanks.

    Read the article

  • How can I pass an external instance to the constructor of an object that's being created using the default XNA XML content loader?

    - by Michael
    I'm trying to understand how to use the XNA XML content importer to instantiate non-trivial objects that are more than a collection of basic properties (e.g., a class that inherits from DrawableGameObject or GameObject and requires other things to be passed into its constructor). Is it possible to pass existing external instances (e.g., an instance of the current Game) to the constructor of an object that's being created using the default XNA XML content loader? For example, imagine that I have the following class, inheriting from DrawableGameComponent: public class Character : DrawableGameComponent { public string Name { get; set; } public Character(Game game) : base(game) { } public override void Update(GameTime gameTime) { } public override void Draw(GameTime gameTime) { } } If I had a simple class that did not need other parameters in its constructor (i.e., the Game instance), then I could simply use this XML: <XnaContent> <Asset Type="MyNamespace.Character"> <Name>John Doe</Name> </Asset> </XnaContent> ...and then create an instance of Character using this code: var character = Content.Load<Character>("MyXmlAssetName"); But that won't work because I need to pass the need to pass the Game into the constructor. What's the best way to handle this situation? Is there a way to pass in things like the current Game using the default XNA XML content loader? Do I need to write my own XML loader? (If so, how?) Is there a better object-oriented design that I should be using for my classes? Note: Although I used Game in this example, I'm really just asking how to pass any type of existing instance to my constructors. (For example, I'm using the Farseer Physics Engine, and some of my classes also need a reference to the Farseer World object too.) Thanks in advance.

    Read the article

  • c# scripting execution with xna (actions take more than 1 frame)

    - by user658091
    I'm trying to figure out how to implement c# scripting into my game (XNA with C#). I will be using C# as the scripting language. My question is, how to call functions that take more than 1 frame to finish? For example: class UserScript : Script { public override void execute(Game game) { //script must wait for dialog to be closed game.openDialog("This is a dialog"); //script should'nt wait for this int goldToGive = 100; goldToGive += 100; game.addGold(goldToGive); // //script should wait for cinematic to end game.startCinematic("name_of_cinematic"); //doesn't wait game.addGold(100); } } I found that you can do that with yield, but I'm not sure if it's the correct way (It's from 2010, the article mentioned no longer exists). http://stackoverflow.com/questions/3540231/implementing-a-simple-xml-based-scripting-language-for-an-xna-game Is yield the answer? If so, can anyone point me any examples/tutorials/books? I haven't found any regarding my situation. If not, what approach should I take? or am I better off with multi-threading?

    Read the article

  • Transparent JPanel, Canvas background in JFrame

    - by Andy Tyurin
    I wanna make canvas background and add some elements on top of it. For this goal I made JPanel as transparent container with setOpaque(false) and added it as first of JFrame container, then I added canvas with black background (in future I wanna set animation) to JFrame as second element. But I can't undestand why i see grey background, not a black. Any suggestions? public class Game extends JFrame { public Container container; //Game container with components public Canvas backgroundLayer; //Background layer of a game public JPanel elementsLayer; //elements panel (top of backgroundLayer), holds different elements private Dimension startGameDimension = new Dimension(800,600); //start game dimension public Game() { //init main window super("Astra LaserForces"); setSize(startGameDimension); setBackground(Color.CYAN); container=getContentPane(); container.setLayout(null); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //init jpanel elements layer elementsLayer=new JPanel(); elementsLayer.setSize(startGameDimension); elementsLayer.setBackground(Color.BLUE); elementsLayer.setOpaque(false); container.add(elementsLayer); //init canvas background layer backgroundLayer = new Canvas(); backgroundLayer.setSize(startGameDimension); backgroundLayer.setBackground(Color.BLACK); //set default black color container.add(backgroundLayer); } //start game public void start() { setVisible(true); } //create new instance of game and start it public static void main(String[] args) { new Game().start(); } }

    Read the article

  • What are good sites that provide free media resources for hobby game development?

    - by m_oLogin
    (Note : This question is being transfered from stackoverflow to gamedev.stackexchange where it belongs) I really suck at graphics / music / 3D modeling / animation and it's a must-have when you have a hundred hobby game development projects you're working on. I'm looking for different quality sources on the web that provide free resources. [EDIT] Some resources given by the answers, in bold the biggest resource per section: MODELS TurboSquid archive3d 3Dvia Google Sketchup ShareCG SPRITES OpenGameArt (also contains textures and 3D models) LostGarden (a couple of isometric tilesets) The Protagonist Domain (2 sprite sets) Reiner's Tilesets (also contains a couple of 3D models) Flying Yogi (3 sprite sets) Has Graphics (a couple of links to tile sets) ANIMATED SPRITES The Spriters Resource (mostly sprites from released games) CLIPART / VECTOR BASED Clker OpenClipArt PHOTOS EveryStockPhoto TEXTURES CG Textures OpenFrag MUSIC Jamendo OpSound SOUND EFFECTS FreeSound StoneWashed MySoundFx OTHER PRECOMPILED LISTS FreeGameDev.net

    Read the article

  • XNA Screen Manager problem with transitions

    - by NexAddo
    I'm having issues using the game statemanagement example in the game I am developing. I have no issues with my first three screens transitioning between one another. I have a main menu screen, a splash screen and a high score screen that cycle: mainMenuScreen->splashScreen->highScoreScreen->mainMenuScreen The screens change every 15 seconds. Transition times public MainMenuScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.0); currentCreditAmount = Global.CurrentCredits; } public SplashScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } public HighScoreScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } public GamePlayScreen() { TransitionOnTime = TimeSpan.FromSeconds(0.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } When a user inserts credits they can play the game after pressing start mainMenuScreen->splashScreen->highScoreScreen->(loops forever) || || || ===========Credits In============= || Start || \/ LoadingScreen || Start || \/ GamePlayScreen During each of these transitions, between screens, the same code is used, which exits(removes) all current active screens and respects transitions, then adds the new screen to the screen manager: foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); //AddScreen takes a new screen to manage and the controlling player ScreenManager.AddScreen(new NameOfScreenHere(), null); Each screen is removed from the ScreenManager with ExitScreen() and using this function, each screen transition is respected. The problem I am having is with my gamePlayScreen. When the current game is finished and the transition is complete for the gamePlayScreen, it should be removed and the next screens should be added to the ScreenManager. GamePlayScreen Code Snippet private void FinishCurrentGame() { AudioManager.StopSounds(); this.UnloadContent(); if (Global.SaveDevice.IsReady) Stats.Save(); if (HighScoreScreen.IsInHighscores(timeLimit)) { foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); Global.TimeRemaining = timeLimit; ScreenManager.AddScreen(new BackgroundScreen(), null); ScreenManager.AddScreen(new MessageBoxScreen("Enter your Initials", true), null); } else { foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); ScreenManager.AddScreen(new BackgroundScreen(), null); ScreenManager.AddScreen(new MainMenuScreen(), null); } } The problem is that when isExiting is set to true by screen.ExitScreen() for the gamePlayScreen, the transition never completes the transition and removes the screen from the ScreenManager. Every other screen that I use the same technique to add and remove each screen fully transitions On/Off and is removed at the appropriate time from the ScreenManager, but noy my GamePlayScreen. Has anyone that has used the GameStateManagement example experienced this issue or can someone see the mistake I am making? EDIT This is what I tracked down. When the game is done, I call foreach (GameScreen screen in ScreenManager.GetScreens()) screen.ExitScreen(); to start the transition off process for the gameplay screen. At this point there is only 1 screen on the ScreenManager stack. The gamePlay screen gets isExiting set to true and starts to transition off. Right after the above call to ExitScreen() I add a background screen and menu screen to the screenManager: ScreenManager.AddScreen(new background(), null); ScreenManager.AddScreen(new Menu(), null); The count of the ScreenManager is now 3. What I noticed while stepping through the updates for GameScreen and ScreenManager, the gameplay screen never gets to the point where the transistion process finishes so the ScreenManager can remove it from the stack. This anomaly does not happen to any of my other screens when I switch between them. Screen Manager Code #region File Description //----------------------------------------------------------------------------- // ScreenManager.cs // // Microsoft XNA Community Game Platform // Copyright (C) Microsoft Corporation. All rights reserved. //----------------------------------------------------------------------------- #endregion #define DEMO #region Using Statements using System; using System.Diagnostics; using System.Collections.Generic; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; using PerformanceUtility.GameDebugTools; #endregion namespace GameStateManagement { /// <summary> /// The screen manager is a component which manages one or more GameScreen /// instances. It maintains a stack of screens, calls their Update and Draw /// methods at the appropriate times, and automatically routes input to the /// topmost active screen. /// </summary> public class ScreenManager : DrawableGameComponent { #region Fields List<GameScreen> screens = new List<GameScreen>(); List<GameScreen> screensToUpdate = new List<GameScreen>(); InputState input = new InputState(); SpriteBatch spriteBatch; SpriteFont font; Texture2D blankTexture; bool isInitialized; bool getOut; bool traceEnabled; #if DEBUG DebugSystem debugSystem; Stopwatch stopwatch = new Stopwatch(); bool debugTextEnabled; #endif #endregion #region Properties /// <summary> /// A default SpriteBatch shared by all the screens. This saves /// each screen having to bother creating their own local instance. /// </summary> public SpriteBatch SpriteBatch { get { return spriteBatch; } } /// <summary> /// A default font shared by all the screens. This saves /// each screen having to bother loading their own local copy. /// </summary> public SpriteFont Font { get { return font; } } public Rectangle ScreenRectangle { get { return new Rectangle(0, 0, GraphicsDevice.Viewport.Width, GraphicsDevice.Viewport.Height); } } /// <summary> /// If true, the manager prints out a list of all the screens /// each time it is updated. This can be useful for making sure /// everything is being added and removed at the right times. /// </summary> public bool TraceEnabled { get { return traceEnabled; } set { traceEnabled = value; } } #if DEBUG public bool DebugTextEnabled { get { return debugTextEnabled; } set { debugTextEnabled = value; } } public DebugSystem DebugSystem { get { return debugSystem; } } #endif #endregion #region Initialization /// <summary> /// Constructs a new screen manager component. /// </summary> public ScreenManager(Game game) : base(game) { // we must set EnabledGestures before we can query for them, but // we don't assume the game wants to read them. //TouchPanel.EnabledGestures = GestureType.None; } /// <summary> /// Initializes the screen manager component. /// </summary> public override void Initialize() { base.Initialize(); #if DEBUG debugSystem = DebugSystem.Initialize(Game, "Fonts/MenuFont"); #endif isInitialized = true; } /// <summary> /// Load your graphics content. /// </summary> protected override void LoadContent() { // Load content belonging to the screen manager. ContentManager content = Game.Content; spriteBatch = new SpriteBatch(GraphicsDevice); font = content.Load<SpriteFont>(@"Fonts\menufont"); blankTexture = content.Load<Texture2D>(@"Textures\Backgrounds\blank"); // Tell each of the screens to load their content. foreach (GameScreen screen in screens) { screen.LoadContent(); } } /// <summary> /// Unload your graphics content. /// </summary> protected override void UnloadContent() { // Tell each of the screens to unload their content. foreach (GameScreen screen in screens) { screen.UnloadContent(); } } #endregion #region Update and Draw /// <summary> /// Allows each screen to run logic. /// </summary> public override void Update(GameTime gameTime) { #if DEBUG debugSystem.TimeRuler.StartFrame(); debugSystem.TimeRuler.BeginMark("Update", Color.Blue); if (debugTextEnabled && getOut == false) { debugSystem.FpsCounter.Visible = true; debugSystem.TimeRuler.Visible = true; debugSystem.TimeRuler.ShowLog = true; getOut = true; } else if (debugTextEnabled == false) { getOut = false; debugSystem.FpsCounter.Visible = false; debugSystem.TimeRuler.Visible = false; debugSystem.TimeRuler.ShowLog = false; } #endif // Read the keyboard and gamepad. input.Update(); // Make a copy of the master screen list, to avoid confusion if // the process of updating one screen adds or removes others. screensToUpdate.Clear(); foreach (GameScreen screen in screens) screensToUpdate.Add(screen); bool otherScreenHasFocus = !Game.IsActive; bool coveredByOtherScreen = false; // Loop as long as there are screens waiting to be updated. while (screensToUpdate.Count > 0) { // Pop the topmost screen off the waiting list. GameScreen screen = screensToUpdate[screensToUpdate.Count - 1]; screensToUpdate.RemoveAt(screensToUpdate.Count - 1); // Update the screen. screen.Update(gameTime, otherScreenHasFocus, coveredByOtherScreen); if (screen.ScreenState == ScreenState.TransitionOn || screen.ScreenState == ScreenState.Active) { // If this is the first active screen we came across, // give it a chance to handle input. if (!otherScreenHasFocus) { screen.HandleInput(input); otherScreenHasFocus = true; } // If this is an active non-popup, inform any subsequent // screens that they are covered by it. if (!screen.IsPopup) coveredByOtherScreen = true; } } // Print debug trace? if (traceEnabled) TraceScreens(); #if DEBUG debugSystem.TimeRuler.EndMark("Update"); #endif } /// <summary> /// Prints a list of all the screens, for debugging. /// </summary> void TraceScreens() { List<string> screenNames = new List<string>(); foreach (GameScreen screen in screens) screenNames.Add(screen.GetType().Name); Debug.WriteLine(string.Join(", ", screenNames.ToArray())); } /// <summary> /// Tells each screen to draw itself. /// </summary> public override void Draw(GameTime gameTime) { #if DEBUG debugSystem.TimeRuler.StartFrame(); debugSystem.TimeRuler.BeginMark("Draw", Color.Yellow); #endif foreach (GameScreen screen in screens) { if (screen.ScreenState == ScreenState.Hidden) continue; screen.Draw(gameTime); } #if DEBUG debugSystem.TimeRuler.EndMark("Draw"); #endif #if DEMO SpriteBatch.Begin(); SpriteBatch.DrawString(font, "DEMO - NOT FOR RESALE", new Vector2(20, 80), Color.White); SpriteBatch.End(); #endif } #endregion #region Public Methods /// <summary> /// Adds a new screen to the screen manager. /// </summary> public void AddScreen(GameScreen screen, PlayerIndex? controllingPlayer) { screen.ControllingPlayer = controllingPlayer; screen.ScreenManager = this; screen.IsExiting = false; // If we have a graphics device, tell the screen to load content. if (isInitialized) { screen.LoadContent(); } screens.Add(screen); } /// <summary> /// Removes a screen from the screen manager. You should normally /// use GameScreen.ExitScreen instead of calling this directly, so /// the screen can gradually transition off rather than just being /// instantly removed. /// </summary> public void RemoveScreen(GameScreen screen) { // If we have a graphics device, tell the screen to unload content. if (isInitialized) { screen.UnloadContent(); } screens.Remove(screen); screensToUpdate.Remove(screen); } /// <summary> /// Expose an array holding all the screens. We return a copy rather /// than the real master list, because screens should only ever be added /// or removed using the AddScreen and RemoveScreen methods. /// </summary> public GameScreen[] GetScreens() { return screens.ToArray(); } /// <summary> /// Helper draws a translucent black fullscreen sprite, used for fading /// screens in and out, and for darkening the background behind popups. /// </summary> public void FadeBackBufferToBlack(float alpha) { Viewport viewport = GraphicsDevice.Viewport; spriteBatch.Begin(); spriteBatch.Draw(blankTexture, new Rectangle(0, 0, viewport.Width, viewport.Height), Color.Black * alpha); spriteBatch.End(); } #endregion } } Game Screen Parent of GamePlayScreen #region File Description //----------------------------------------------------------------------------- // GameScreen.cs // // Microsoft XNA Community Game Platform // Copyright (C) Microsoft Corporation. All rights reserved. //----------------------------------------------------------------------------- #endregion #region Using Statements using System; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Input; //using Microsoft.Xna.Framework.Input.Touch; using System.IO; #endregion namespace GameStateManagement { /// <summary> /// Enum describes the screen transition state. /// </summary> public enum ScreenState { TransitionOn, Active, TransitionOff, Hidden, } /// <summary> /// A screen is a single layer that has update and draw logic, and which /// can be combined with other layers to build up a complex menu system. /// For instance the main menu, the options menu, the "are you sure you /// want to quit" message box, and the main game itself are all implemented /// as screens. /// </summary> public abstract class GameScreen { #region Properties /// <summary> /// Normally when one screen is brought up over the top of another, /// the first screen will transition off to make room for the new /// one. This property indicates whether the screen is only a small /// popup, in which case screens underneath it do not need to bother /// transitioning off. /// </summary> public bool IsPopup { get { return isPopup; } protected set { isPopup = value; } } bool isPopup = false; /// <summary> /// Indicates how long the screen takes to /// transition on when it is activated. /// </summary> public TimeSpan TransitionOnTime { get { return transitionOnTime; } protected set { transitionOnTime = value; } } TimeSpan transitionOnTime = TimeSpan.Zero; /// <summary> /// Indicates how long the screen takes to /// transition off when it is deactivated. /// </summary> public TimeSpan TransitionOffTime { get { return transitionOffTime; } protected set { transitionOffTime = value; } } TimeSpan transitionOffTime = TimeSpan.Zero; /// <summary> /// Gets the current position of the screen transition, ranging /// from zero (fully active, no transition) to one (transitioned /// fully off to nothing). /// </summary> public float TransitionPosition { get { return transitionPosition; } protected set { transitionPosition = value; } } float transitionPosition = 1; /// <summary> /// Gets the current alpha of the screen transition, ranging /// from 1 (fully active, no transition) to 0 (transitioned /// fully off to nothing). /// </summary> public float TransitionAlpha { get { return 1f - TransitionPosition; } } /// <summary> /// Gets the current screen transition state. /// </summary> public ScreenState ScreenState { get { return screenState; } protected set { screenState = value; } } ScreenState screenState = ScreenState.TransitionOn; /// <summary> /// There are two possible reasons why a screen might be transitioning /// off. It could be temporarily going away to make room for another /// screen that is on top of it, or it could be going away for good. /// This property indicates whether the screen is exiting for real: /// if set, the screen will automatically remove itself as soon as the /// transition finishes. /// </summary> public bool IsExiting { get { return isExiting; } protected internal set { isExiting = value; } } bool isExiting = false; /// <summary> /// Checks whether this screen is active and can respond to user input. /// </summary> public bool IsActive { get { return !otherScreenHasFocus && (screenState == ScreenState.TransitionOn || screenState == ScreenState.Active); } } bool otherScreenHasFocus; /// <summary> /// Gets the manager that this screen belongs to. /// </summary> public ScreenManager ScreenManager { get { return screenManager; } internal set { screenManager = value; } } ScreenManager screenManager; public KeyboardState KeyboardState { get {return Keyboard.GetState();} } /// <summary> /// Gets the index of the player who is currently controlling this screen, /// or null if it is accepting input from any player. This is used to lock /// the game to a specific player profile. The main menu responds to input /// from any connected gamepad, but whichever player makes a selection from /// this menu is given control over all subsequent screens, so other gamepads /// are inactive until the controlling player returns to the main menu. /// </summary> public PlayerIndex? ControllingPlayer { get { return controllingPlayer; } internal set { controllingPlayer = value; } } PlayerIndex? controllingPlayer; /// <summary> /// Gets whether or not this screen is serializable. If this is true, /// the screen will be recorded into the screen manager's state and /// its Serialize and Deserialize methods will be called as appropriate. /// If this is false, the screen will be ignored during serialization. /// By default, all screens are assumed to be serializable. /// </summary> public bool IsSerializable { get { return isSerializable; } protected set { isSerializable = value; } } bool isSerializable = true; #endregion #region Initialization /// <summary> /// Load graphics content for the screen. /// </summary> public virtual void LoadContent() { } /// <summary> /// Unload content for the screen. /// </summary> public virtual void UnloadContent() { } #endregion #region Update and Draw /// <summary> /// Allows the screen to run logic, such as updating the transition position. /// Unlike HandleInput, this method is called regardless of whether the screen /// is active, hidden, or in the middle of a transition. /// </summary> public virtual void Update(GameTime gameTime, bool otherScreenHasFocus, bool coveredByOtherScreen) { this.otherScreenHasFocus = otherScreenHasFocus; if (isExiting) { // If the screen is going away to die, it should transition off. screenState = ScreenState.TransitionOff; if (!UpdateTransition(gameTime, transitionOffTime, 1)) { // When the transition finishes, remove the screen. ScreenManager.RemoveScreen(this); } } else if (coveredByOtherScreen) { // If the screen is covered by another, it should transition off. if (UpdateTransition(gameTime, transitionOffTime, 1)) { // Still busy transitioning. screenState = ScreenState.TransitionOff; } else { // Transition finished! screenState = ScreenState.Hidden; } } else { // Otherwise the screen should transition on and become active. if (UpdateTransition(gameTime, transitionOnTime, -1)) { // Still busy transitioning. screenState = ScreenState.TransitionOn; } else { // Transition finished! screenState = ScreenState.Active; } } } /// <summary> /// Helper for updating the screen transition position. /// </summary> bool UpdateTransition(GameTime gameTime, TimeSpan time, int direction) { // How much should we move by? float transitionDelta; if (time == TimeSpan.Zero) transitionDelta = 1; else transitionDelta = (float)(gameTime.ElapsedGameTime.TotalMilliseconds / time.TotalMilliseconds); // Update the transition position. transitionPosition += transitionDelta * direction; // Did we reach the end of the transition? if (((direction < 0) && (transitionPosition <= 0)) || ((direction > 0) && (transitionPosition >= 1))) { transitionPosition = MathHelper.Clamp(transitionPosition, 0, 1); return false; } // Otherwise we are still busy transitioning. return true; } /// <summary> /// Allows the screen to handle user input. Unlike Update, this method /// is only called when the screen is active, and not when some other /// screen has taken the focus. /// </summary> public virtual void HandleInput(InputState input) { } public KeyboardState currentKeyState; public KeyboardState lastKeyState; public bool IsKeyHit(Keys key) { if (currentKeyState.IsKeyDown(key) && lastKeyState.IsKeyUp(key)) return true; return false; } /// <summary> /// This is called when the screen should draw itself. /// </summary> public virtual void Draw(GameTime gameTime) { } #endregion #region Public Methods /// <summary> /// Tells the screen to serialize its state into the given stream. /// </summary> public virtual void Serialize(Stream stream) { } /// <summary> /// Tells the screen to deserialize its state from the given stream. /// </summary> public virtual void Deserialize(Stream stream) { } /// <summary> /// Tells the screen to go away. Unlike ScreenManager.RemoveScreen, which /// instantly kills the screen, this method respects the transition timings /// and will give the screen a chance to gradually transition off. /// </summary> public void ExitScreen() { if (TransitionOffTime == TimeSpan.Zero) { // If the screen has a zero transition time, remove it immediately. ScreenManager.RemoveScreen(this); } else { // Otherwise flag that it should transition off and then exit. isExiting = true; } } #endregion #region Helper Methods /// <summary> /// A helper method which loads assets using the screen manager's /// associated game content loader. /// </summary> /// <typeparam name="T">Type of asset.</typeparam> /// <param name="assetName">Asset name, relative to the loader root /// directory, and not including the .xnb extension.</param> /// <returns></returns> public T Load<T>(string assetName) { return ScreenManager.Game.Content.Load<T>(assetName); } #endregion } }

    Read the article

  • How to make and render a simple game just with 3d max?

    - by Sina
    I want to make a simple EXE file, where there is one object in the scene and the user can rotate that object by using arrow keys (or mouse). Is there any way in which I don't have to use a game engine and do it only using 3dsmax script? Cause there is a special renderer I want to use, which is V-Ray a kind of renderer which provides 3D images for 3D glasses. I am not good at making games and engines so I want to know if I can do it only with 3dsmax scripts?

    Read the article

  • Easy to use cross-platform 3D engines for C++ game development?

    - by davr
    I want to try my hand at writing a 3D game. However I don't want to start at such a low level of drawing individual triangles and writing my own 3D object loader and so on. I've heard of things like Irrlicht, Crystal Space 3D, and Cafu, but I don't have any experience with any of them. I'm looking for suggestions from people who have experience with these or other engines on which ones are well written, and are easy to get started using, without having to learn a ton of 3D math theory and how GPU's work internally.

    Read the article

  • Ball bouncing at a certain angle and efficiency computations

    - by X Y
    I would like to make a pong game with a small twist (for now). Every time the ball bounces off one of the paddles i want it to be under a certain angle (between a min and a max). I simply can't wrap my head around how to actually do it (i have some thoughts and such but i simply cannot implement them properly - i feel i'm overcomplicating things). Here's an image with a small explanation . One other problem would be that the conditions for bouncing have to be different for every edge. For example, in the picture, on the two small horizontal edges i do not want a perfectly vertical bounce when in the middle of the edge but rather a constant angle (pi/4 maybe) in either direction depending on the collision point (before the middle of the edge, or after). All of my collisions are done with the Separating Axes Theorem (and seem to work fine). I'm looking for something efficient because i want to add a lot of things later on (maybe polygons with many edges and such). So i need to keep to a minimum the amount of checking done every frame. The collision algorithm begins testing whenever the bounding boxes of the paddle and the ball intersect. Is there something better to test for possible collisions every frame? (more efficient in the long run,with many more objects etc, not necessarily easy to code). I'm going to post the code for my game: Paddle Class public class Paddle : Microsoft.Xna.Framework.DrawableGameComponent { #region Private Members private SpriteBatch spriteBatch; private ContentManager contentManager; private bool keybEnabled; private bool isLeftPaddle; private Texture2D paddleSprite; private Vector2 paddlePosition; private float paddleSpeedY; private Vector2 paddleScale = new Vector2(1f, 1f); private const float DEFAULT_Y_SPEED = 150; private Vector2[] Normals2Edges; private Vector2[] Vertices = new Vector2[4]; private List<Vector2> lst = new List<Vector2>(); private Vector2 Edge; #endregion #region Properties public float Speed { get {return paddleSpeedY; } set { paddleSpeedY = value; } } public Vector2[] Normal2EdgesVector { get { NormalsToEdges(this.isLeftPaddle); return Normals2Edges; } } public Vector2[] VertexVector { get { return Vertices; } } public Vector2 Scale { get { return paddleScale; } set { paddleScale = value; NormalsToEdges(this.isLeftPaddle); } } public float X { get { return paddlePosition.X; } set { paddlePosition.X = value; } } public float Y { get { return paddlePosition.Y; } set { paddlePosition.Y = value; } } public float Width { get { return (Scale.X == 1f ? (float)paddleSprite.Width : paddleSprite.Width * Scale.X); } } public float Height { get { return ( Scale.Y==1f ? (float)paddleSprite.Height : paddleSprite.Height*Scale.Y ); } } public Texture2D GetSprite { get { return paddleSprite; } } public Rectangle Boundary { get { return new Rectangle((int)paddlePosition.X, (int)paddlePosition.Y, (int)this.Width, (int)this.Height); } } public bool KeyboardEnabled { get { return keybEnabled; } } #endregion private void NormalsToEdges(bool isLeftPaddle) { Normals2Edges = null; Edge = Vector2.Zero; lst.Clear(); for (int i = 0; i < Vertices.Length; i++) { Edge = Vertices[i + 1 == Vertices.Length ? 0 : i + 1] - Vertices[i]; if (Edge != Vector2.Zero) { Edge.Normalize(); //outer normal to edge !! (origin in top-left) lst.Add(new Vector2(Edge.Y, -Edge.X)); } } Normals2Edges = lst.ToArray(); } public float[] ProjectPaddle(Vector2 axis) { if (Vertices.Length == 0 || axis == Vector2.Zero) return (new float[2] { 0, 0 }); float min, max; min = Vector2.Dot(axis, Vertices[0]); max = min; for (int i = 1; i < Vertices.Length; i++) { float p = Vector2.Dot(axis, Vertices[i]); if (p < min) min = p; else if (p > max) max = p; } return (new float[2] { min, max }); } public Paddle(Game game, bool isLeftPaddle, bool enableKeyboard = true) : base(game) { contentManager = new ContentManager(game.Services); keybEnabled = enableKeyboard; this.isLeftPaddle = isLeftPaddle; } public void setPosition(Vector2 newPos) { X = newPos.X; Y = newPos.Y; } public override void Initialize() { base.Initialize(); this.Speed = DEFAULT_Y_SPEED; X = 0; Y = 0; NormalsToEdges(this.isLeftPaddle); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); paddleSprite = contentManager.Load<Texture2D>(@"Content\pongBar"); } public override void Update(GameTime gameTime) { //vertices array Vertices[0] = this.paddlePosition; Vertices[1] = this.paddlePosition + new Vector2(this.Width, 0); Vertices[2] = this.paddlePosition + new Vector2(this.Width, this.Height); Vertices[3] = this.paddlePosition + new Vector2(0, this.Height); // Move paddle, but don't allow movement off the screen if (KeyboardEnabled) { float moveDistance = Speed * (float)gameTime.ElapsedGameTime.TotalSeconds; KeyboardState newKeyState = Keyboard.GetState(); if (newKeyState.IsKeyDown(Keys.Down) && Y + paddleSprite.Height + moveDistance <= Game.GraphicsDevice.Viewport.Height) { Y += moveDistance; } else if (newKeyState.IsKeyDown(Keys.Up) && Y - moveDistance >= 0) { Y -= moveDistance; } } else { if (this.Y + this.Height > this.GraphicsDevice.Viewport.Height) { this.Y = this.Game.GraphicsDevice.Viewport.Height - this.Height - 1; } } base.Update(gameTime); } public override void Draw(GameTime gameTime) { spriteBatch.Begin(SpriteSortMode.Texture,null); spriteBatch.Draw(paddleSprite, paddlePosition, null, Color.White, 0f, Vector2.Zero, Scale, SpriteEffects.None, 0); spriteBatch.End(); base.Draw(gameTime); } } Ball Class public class Ball : Microsoft.Xna.Framework.DrawableGameComponent { #region Private Members private SpriteBatch spriteBatch; private ContentManager contentManager; private const float DEFAULT_SPEED = 50; private float speedIncrement = 0; private Vector2 ballScale = new Vector2(1f, 1f); private const float INCREASE_SPEED = 50; private Texture2D ballSprite; //initial texture private Vector2 ballPosition; //position private Vector2 centerOfBall; //center coords private Vector2 ballSpeed = new Vector2(DEFAULT_SPEED, DEFAULT_SPEED); //speed #endregion #region Properties public float DEFAULTSPEED { get { return DEFAULT_SPEED; } } public Vector2 ballCenter { get { return centerOfBall; } } public Vector2 Scale { get { return ballScale; } set { ballScale = value; } } public float SpeedX { get { return ballSpeed.X; } set { ballSpeed.X = value; } } public float SpeedY { get { return ballSpeed.Y; } set { ballSpeed.Y = value; } } public float X { get { return ballPosition.X; } set { ballPosition.X = value; } } public float Y { get { return ballPosition.Y; } set { ballPosition.Y = value; } } public Texture2D GetSprite { get { return ballSprite; } } public float Width { get { return (Scale.X == 1f ? (float)ballSprite.Width : ballSprite.Width * Scale.X); } } public float Height { get { return (Scale.Y == 1f ? (float)ballSprite.Height : ballSprite.Height * Scale.Y); } } public float SpeedIncreaseIncrement { get { return speedIncrement; } set { speedIncrement = value; } } public Rectangle Boundary { get { return new Rectangle((int)ballPosition.X, (int)ballPosition.Y, (int)this.Width, (int)this.Height); } } #endregion public Ball(Game game) : base(game) { contentManager = new ContentManager(game.Services); } public void Reset() { ballSpeed.X = DEFAULT_SPEED; ballSpeed.Y = DEFAULT_SPEED; ballPosition.X = Game.GraphicsDevice.Viewport.Width / 2 - ballSprite.Width / 2; ballPosition.Y = Game.GraphicsDevice.Viewport.Height / 2 - ballSprite.Height / 2; } public void SpeedUp() { if (ballSpeed.Y < 0) ballSpeed.Y -= (INCREASE_SPEED + speedIncrement); else ballSpeed.Y += (INCREASE_SPEED + speedIncrement); if (ballSpeed.X < 0) ballSpeed.X -= (INCREASE_SPEED + speedIncrement); else ballSpeed.X += (INCREASE_SPEED + speedIncrement); } public float[] ProjectBall(Vector2 axis) { if (axis == Vector2.Zero) return (new float[2] { 0, 0 }); float min, max; min = Vector2.Dot(axis, this.ballCenter) - this.Width/2; //center - radius max = min + this.Width; //center + radius return (new float[2] { min, max }); } public void ChangeHorzDirection() { ballSpeed.X *= -1; } public void ChangeVertDirection() { ballSpeed.Y *= -1; } public override void Initialize() { base.Initialize(); ballPosition.X = Game.GraphicsDevice.Viewport.Width / 2 - ballSprite.Width / 2; ballPosition.Y = Game.GraphicsDevice.Viewport.Height / 2 - ballSprite.Height / 2; } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); ballSprite = contentManager.Load<Texture2D>(@"Content\ball"); } public override void Update(GameTime gameTime) { if (this.Y < 1 || this.Y > GraphicsDevice.Viewport.Height - this.Height - 1) this.ChangeVertDirection(); centerOfBall = new Vector2(ballPosition.X + this.Width / 2, ballPosition.Y + this.Height / 2); base.Update(gameTime); } public override void Draw(GameTime gameTime) { spriteBatch.Begin(); spriteBatch.Draw(ballSprite, ballPosition, null, Color.White, 0f, Vector2.Zero, Scale, SpriteEffects.None, 0); spriteBatch.End(); base.Draw(gameTime); } } Main game class public class gameStart : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; public gameStart() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; this.Window.Title = "Pong game"; } protected override void Initialize() { ball = new Ball(this); paddleLeft = new Paddle(this,true,false); paddleRight = new Paddle(this,false,true); Components.Add(ball); Components.Add(paddleLeft); Components.Add(paddleRight); this.Window.AllowUserResizing = false; this.IsMouseVisible = true; this.IsFixedTimeStep = false; this.isColliding = false; base.Initialize(); } #region MyPrivateStuff private Ball ball; private Paddle paddleLeft, paddleRight; private int[] bit = { -1, 1 }; private Random rnd = new Random(); private int updates = 0; enum nrPaddle { None, Left, Right }; private nrPaddle PongBar = nrPaddle.None; private ArrayList Axes = new ArrayList(); private Vector2 MTV; //minimum translation vector private bool isColliding; private float overlap; //smallest distance after projections private Vector2 overlapAxis; //axis of overlap #endregion protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); paddleLeft.setPosition(new Vector2(0, this.GraphicsDevice.Viewport.Height / 2 - paddleLeft.Height / 2)); paddleRight.setPosition(new Vector2(this.GraphicsDevice.Viewport.Width - paddleRight.Width, this.GraphicsDevice.Viewport.Height / 2 - paddleRight.Height / 2)); paddleLeft.Scale = new Vector2(1f, 2f); //scale left paddle } private bool ShapesIntersect(Paddle paddle, Ball ball) { overlap = 1000000f; //large value overlapAxis = Vector2.Zero; MTV = Vector2.Zero; foreach (Vector2 ax in Axes) { float[] pad = paddle.ProjectPaddle(ax); //pad0 = min, pad1 = max float[] circle = ball.ProjectBall(ax); //circle0 = min, circle1 = max if (pad[1] <= circle[0] || circle[1] <= pad[0]) { return false; } if (pad[1] - circle[0] < circle[1] - pad[0]) { if (Math.Abs(overlap) > Math.Abs(-pad[1] + circle[0])) { overlap = -pad[1] + circle[0]; overlapAxis = ax; } } else { if (Math.Abs(overlap) > Math.Abs(circle[1] - pad[0])) { overlap = circle[1] - pad[0]; overlapAxis = ax; } } } if (overlapAxis != Vector2.Zero) { MTV = overlapAxis * overlap; } return true; } protected override void Update(GameTime gameTime) { updates += 1; float ftime = 5 * (float)gameTime.ElapsedGameTime.TotalSeconds; if (updates == 1) { isColliding = false; int Xrnd = bit[Convert.ToInt32(rnd.Next(0, 2))]; int Yrnd = bit[Convert.ToInt32(rnd.Next(0, 2))]; ball.SpeedX = Xrnd * ball.SpeedX; ball.SpeedY = Yrnd * ball.SpeedY; ball.X += ftime * ball.SpeedX; ball.Y += ftime * ball.SpeedY; } else { updates = 100; ball.X += ftime * ball.SpeedX; ball.Y += ftime * ball.SpeedY; } //autorun :) paddleLeft.Y = ball.Y; //collision detection PongBar = nrPaddle.None; if (ball.Boundary.Intersects(paddleLeft.Boundary)) { PongBar = nrPaddle.Left; if (!isColliding) { Axes.Clear(); Axes.AddRange(paddleLeft.Normal2EdgesVector); //axis from nearest vertex to ball's center Axes.Add(FORMULAS.NormAxisFromCircle2ClosestVertex(paddleLeft.VertexVector, ball.ballCenter)); } } else if (ball.Boundary.Intersects(paddleRight.Boundary)) { PongBar = nrPaddle.Right; if (!isColliding) { Axes.Clear(); Axes.AddRange(paddleRight.Normal2EdgesVector); //axis from nearest vertex to ball's center Axes.Add(FORMULAS.NormAxisFromCircle2ClosestVertex(paddleRight.VertexVector, ball.ballCenter)); } } if (PongBar != nrPaddle.None && !isColliding) switch (PongBar) { case nrPaddle.Left: if (ShapesIntersect(paddleLeft, ball)) { isColliding = true; if (MTV != Vector2.Zero) ball.X += MTV.X; ball.Y += MTV.Y; ball.ChangeHorzDirection(); } break; case nrPaddle.Right: if (ShapesIntersect(paddleRight, ball)) { isColliding = true; if (MTV != Vector2.Zero) ball.X += MTV.X; ball.Y += MTV.Y; ball.ChangeHorzDirection(); } break; default: break; } if (!ShapesIntersect(paddleRight, ball) && !ShapesIntersect(paddleLeft, ball)) isColliding = false; ball.X += ftime * ball.SpeedX; ball.Y += ftime * ball.SpeedY; //check ball movement if (ball.X > paddleRight.X + paddleRight.Width + 2) { //IncreaseScore(Left); ball.Reset(); updates = 0; return; } else if (ball.X < paddleLeft.X - 2) { //IncreaseScore(Right); ball.Reset(); updates = 0; return; } base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Aquamarine); spriteBatch.Begin(SpriteSortMode.BackToFront, BlendState.AlphaBlend); spriteBatch.End(); base.Draw(gameTime); } } And one method i've used: public static Vector2 NormAxisFromCircle2ClosestVertex(Vector2[] vertices, Vector2 circle) { Vector2 temp = Vector2.Zero; if (vertices.Length > 0) { float dist = (circle.X - vertices[0].X) * (circle.X - vertices[0].X) + (circle.Y - vertices[0].Y) * (circle.Y - vertices[0].Y); for (int i = 1; i < vertices.Length;i++) { if (dist > (circle.X - vertices[i].X) * (circle.X - vertices[i].X) + (circle.Y - vertices[i].Y) * (circle.Y - vertices[i].Y)) { temp = vertices[i]; //memorize the closest vertex dist = (circle.X - vertices[i].X) * (circle.X - vertices[i].X) + (circle.Y - vertices[i].Y) * (circle.Y - vertices[i].Y); } } temp = circle - temp; temp.Normalize(); } return temp; } Thanks in advance for any tips on the 4 issues. EDIT1: Something isn't working properly. The collision axis doesn't come out right and the interpolation also seems to have no effect. I've changed the code a bit: private bool ShapesIntersect(Paddle paddle, Ball ball) { overlap = 1000000f; //large value overlapAxis = Vector2.Zero; MTV = Vector2.Zero; foreach (Vector2 ax in Axes) { float[] pad = paddle.ProjectPaddle(ax); //pad0 = min, pad1 = max float[] circle = ball.ProjectBall(ax); //circle0 = min, circle1 = max if (pad[1] < circle[0] || circle[1] < pad[0]) { return false; } if (Math.Abs(pad[1] - circle[0]) < Math.Abs(circle[1] - pad[0])) { if (Math.Abs(overlap) > Math.Abs(-pad[1] + circle[0])) { overlap = -pad[1] + circle[0]; overlapAxis = ax * (-1); } //to get the proper axis } else { if (Math.Abs(overlap) > Math.Abs(circle[1] - pad[0])) { overlap = circle[1] - pad[0]; overlapAxis = ax; } } } if (overlapAxis != Vector2.Zero) { MTV = overlapAxis * Math.Abs(overlap); } return true; } And part of the Update method: if (ShapesIntersect(paddleRight, ball)) { isColliding = true; if (MTV != Vector2.Zero) { ball.X += MTV.X; ball.Y += MTV.Y; } //test if (overlapAxis.X == 0) //collision with horizontal edge { } else if (overlapAxis.Y == 0) //collision with vertical edge { float factor = Math.Abs(ball.ballCenter.Y - paddleRight.Y) / paddleRight.Height; if (factor > 1) factor = 1f; if (overlapAxis.X < 0) //left edge? ball.Speed = ball.DEFAULTSPEED * Vector2.Normalize(Vector2.Reflect(ball.Speed, (Vector2.Lerp(new Vector2(-1, -3), new Vector2(-1, 3), factor)))); else //right edge? ball.Speed = ball.DEFAULTSPEED * Vector2.Normalize(Vector2.Reflect(ball.Speed, (Vector2.Lerp(new Vector2(1, -3), new Vector2(1, 3), factor)))); } else //vertex collision??? { ball.Speed = -ball.Speed; } } What seems to happen is that "overlapAxis" doesn't always return the right one. So instead of (-1,0) i get the (1,0) (this happened even before i multiplied with -1 there). Sometimes there isn't even a collision registered even though the ball passes through the paddle... The interpolation also seems to have no effect as the angles barely change (or the overlapAxis is almost never (-1,0) or (1,0) but something like (0.9783473, 0.02743843)... ). What am i missing here? :(

    Read the article

  • How can I get six Xbox controllers to provide input to an HTML5 game?

    - by Daniel X Moore
    I'm creating a six player HTML 5 game designed to be played locally (Red Ice). I've previous set up handling 7 Wiimotes using something along the lines of Joy2Key to map each input for each player to a separate keyboard key, but Wiimotes are pretty hard on the hands for these types of games and not very ergonomic so I thought I'd try and get Xbox controller support. I don't believe that any simple key mapping solution will work due to the nature of the directional stick. My inclination is that this will require a browser plugin and if so I'd prefer to write the plugin for Google Chrome. How do I create a Chrome browser plugin to handle multiple Xbox controllers or is there some other way? Please do not answer this question saying it can't be done, because it absolutely can. EDIT: I don't believe any keymapping/mouse simulating solution will work unless it can reliably distinguish six axis of inputs, one per player.

    Read the article

  • Is there any existing (old) game that released graphic as free or open source?

    - by Alexey Petrushin
    I'd like to (re)create an online version (html5/JS) of some old game, for example something like HoM&M 2. Maybe, some of old games were released as free or open source (I'm interested in the graphical assets only)? I heard something about Red Alert been released as free, but I'm not sure if it's permitted to reuse graphical assets in such manner. Do You know such games? Another question - can You please share Your thoughts, rough estimate - how much it will cost to pay an artist to create graphics similar to HoM&M 2?

    Read the article

  • How are realistic 3D faces created and animated in video games?

    - by Anton
    I'm interested in being able to create realistic faces and facial expressions for the 3D characters of a game I'm working on. Think something similar to the dialog scenes in games like Mass Effect. Unfortunately I'm not sure where to begin. I'm sure the faces/animations are created through 3D Modeling software, but otherwise I am lost. Do facial animations use the same "bones" that normal body animation uses? Is there any preferred 3D software for realistic faces and animations? Is there a preferred format to export these faces and animations in?

    Read the article

  • How do I determine the draw order in an isometric view flash game?

    - by Gajet
    This is for a flash game, with isometric view. I need to know how to sort object so that there is no need for z-buffer checking when drawing. This might seem easy but there is another restriction, a scene can have 10,000+ objects so the algorithm needs to be run in less than O(n^2). All objects are rectangular boxes, and there are 3-4 objects moving in the scene. What's the best way to do this? UPDATE in each tile there is only object (I mean objects can stack on top of each other). and we access to both map of Objects and Objects have their own position.

    Read the article

  • 2D game collision response: SAT & minimum displacement along a given axis?

    - by Archagon
    I'm trying to implement a collision system in a 2D game I'm making. The separating axis theorem (as described by metanet's collision tutorial) seems like an efficient and robust way of handling collision detection, but I don't quite like the collision response method they use. By blindly displacing along the axis of least overlap, the algorithm simply ignores the previous position of the moving object, which means that it doesn't collide with the stationary object so much as it enters it and then bounces out. Here's an example of a situation where this would matter: According to the SAT method described above, the rectangle would simply pop out of the triangle perpendicular to its hypotenuse: However, realistically, the rectangle should stop at the lower right corner of the triangle, as that would be the point of first collision if it were moving continuously along its displacement vector: Now, this might not actually matter during gameplay, but I'd love to know if there's a way of efficiently and generally attaining accurate displacements in this manner. I've been racking my brains over it for the past few days, and I don't want to give up yet! (Cross-posted from StackOverflow, hope that's not against the rules!)

    Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >