Search Results

Search found 10812 results on 433 pages for 'boot partition'.

Page 197/433 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Problem with Ubuntu and UEFI (Problem with any linux OS)

  - by K.T.Sumant

  I have purchased a new Sony Vaio laptop and it is said that the Windows in the recent laptops is installed in the UEFI mode. But all the Linux OS are installed in default in Legacy mode. When I reboot my laptop, Ubuntu is not being detected on boot. Only Windows is detected. To access Ubuntu, whenever I boot the system, I need to: (1) enter the boot menu, (2) change the mode to legacy, and (3) type a bit of scary commands in grub then Ubuntu successfully opens. This is a bit of problem for me. So I wanted to know the solution for this problem. So please kindly look over my problem as soon as possible.

  Read the article

• Kernel Panic Fatal Machine Check

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-(

  Read the article

• How can I run Ubuntu if it's not on my main drive?

  - by Stephen

  I have a 120GB SSD and a 750GB HDD in my computer. My SSD has Windows 7 installed and my HDD has Windows 8 installed. When I boot my computer normally, I boot it to my SSD. I went through the installation process, putting Ubuntu on a separate partition on my HDD. When I restarted my computer, it didn't give me an option to boot to Ubuntu. If it helps, I believe I used ext4 and only set it to '/'. If I want to make Ubuntu bootable from my computer, how would I go about doing that?

  Read the article

• Why does update-grub not find ubuntu 11.10?

  - by Klaynos

  I've recently installed ubuntu onto my laptop. With the intention of dual booting with windows 7. On installation Grub wasn't loading, the computer continued to boot straight into windows. I loaded a live cd, mounted the installed ubuntu partion (sda6) as /mnt/ and windows boot partition as /mnt/boot Following the second option here: http://ubuntuguide.net/how-to-restore-grub-2-after-reinstalling-windows-xpvistawin7 Through its entirety, so creating a new grub.cfg file. chroot /mnt update-grub Did not find ubuntu, just windows 7 and the windows recovery partition. Thinking this might be a weird quirk that as I was in ubuntu (all be it a live cd) it might not list ubuntu I restarted. Grub loaded but ubuntu was nowhere to be seen. How can I add ubuntu with Grub2? I could have fixed this myself in old grub but I'm pretty much in the dark here. Thanks

  Read the article

• How can i modify my Grub 1.99 configurations to install a new kernel?

  - by abhi

  I have configured kernel 3.2.x and made some changes in the kernel. I have compiled it and have the compiled image of the kernel with me. The problem i am facing is as in how to modify the boot loader Grub 1.99 in my case, so that i can boot through the new kernel i have compiled. I looked on net for any tutorials but all of them talked about older versions of Grub ? Can someone please give some info or point me towards some resource ? Currently i have compiled my new custom kernel image and have copied it to /boot.

  Read the article

• mail server crash

  - by waxx

  i have a mail server running ubuntu 12.04. my server has a main 200gb hdd as the /, and other scsi hdd. as far as i recall, i used the 5 scsi harddrives for different mount points.. 1 hard drive is /swap, 1 hard drive is /usr ...the other is /boot, i cant recall the other 2.. just yesterday, my /usr drive died... and it wont let me boot into the server.. ive tried to skip mounting the /usr with the S option when i go to recovery drive, but the server still wont boot up. i need help badly because the server needs to be up and running ASAP. thank you for all the help.

  Read the article

• error: you need to load kernel first

  - by Angelos318

  I made a clean install on my Sony Vaio laptop, of Ubuntu 11.10 and when the installation was ready, it prompted to remove the usb I was installing the distro from, and press enter to reboot. After this reboot the first thing I got was the following error: error: couldn't read file error: you need to load the kernel first Press any key to continue.. After that it throws me back to the Grub select screen: Ubuntu, with linux 3.0.0-14-generic-pae recovery mode previous linux versions (none since I made a clean install) memory test If i choose the first option it shows only a black screen and never loads anything. If i reboot the same thing happens. Could I repair this using boot-repair? Is there any other way? Note: I know nothing about linux code so i am a total noob on this one Update: boot-repair did not help Grub.cfg here: http://pastebin.com/GKLuDuhM Boot Info Script: http://pastebin.com/indARkKJ

  Read the article

• A real noob question

  - by Jaymz

  I have a Hp mini netbook that has been wiped clean, there is nothing other than the bios on it, it has no DVD and I don't have an external DVD. I can change the boot order to boot from a usb device. I have downloaded ubuntu-12.04.1-desktop-i386 I have one of these http://www.kikatek.com/P100600/34609-IOMEGA-250gb-Select-Portable-HDD-2-5-USB?source=froogle currently formatted to NTFS but I can format to exFAT I have tried Linuxlive USB creator, all that managed to do was dual boot the desktop pc that I'm working off, and when booting on the wiped clean netbook, just left me with a black screen with a blinking cursor I have also tried Unetbootin, this managed to change my 'My Computer' icon to Install Ubuntu (C:) and now again, my desktop pc dual boots with the Wubi software, the Unetbootin, wouldn't let me select my external drive to write to Please I'm a complete idiot, i need a super idiots guide to doing this Regards Jaymz

  Read the article

• Ubuntu 12.04 very slow on samsung netbook

  - by vallllll

  I have a samsung netbook n150 1Gb Ram (Intel graphic card), 1,66GHz Intel Atom processor. It was working great with the ubuntu 10.04 netbook edition, really fast boot very eficient but I have updated to 12.04 (the netbook edition doesn't exist anymore) and now the system is so slow: slow boot, sometimes it doesn't even boot properly, strange screen light on and off behaviour, when you click on an icon takes for ever to open the app even the terminal it takes like more than 10s! It seems that this new distro was made for a far more powerful systems than this netbook. I am considering to revert back to 10.04 or choose another linux distro but is there anythhing i can do to fix these problems? Any body else had similar problems. Thanks in advance

  Read the article

• bootloader install failed

  - by user211860

  I have lenovo u510 with windows 8. This ultrabook has 24GB SSD and I tried to install Ubuntu 12.04.3 in it. I changed bios from UEFI to legacy and I used a LiveDVD. I created a 17GB partition when I was in windows from this SSD and I tried both manualy or with the "install alongside" but was allways without success because bootloader install failed and was unable to install GRUB. I tried also to use the "recommended repair" from Boot-Repair but it says that my laptop can only with UEFI boot. I changed it but the same thing happens my laptop boot in windows 8.

  Read the article

• How to add a command permanently to grub2

  - by tomodachi

  I have a fairly special setup, using Linux on a MacBook Laptop. to switch off my secondary graphics card in it I'm required to add these lines to my grub outb 0x728 1 outb 0x710 2 outb 0x740 2 outb 0x750 0 I do this by pressing 'e' for my selected grub menu option and adding the lines one by one . then finally booting . But as we know it's not permanent. I cant really figure out where i need to add it for grub to always append it to my Linux boot options. It's doesn't seem to belong in /etc/default/grub since here i can add stuff to the kernel boot line Honestly i'm afraid to fiddle to much with grub on my computer since getting it to triple boot Linux/Mac/Windows was a very delicate and timely matter. Does anyone have any idea of where to add it?

  Read the article

• Ubuntu 12.10 install freezes at configuring hardware

  - by Max Keener

  I'm installing Ubuntu 12.10 (64 bit) from a bootable USB stick. At first I had trouble with a black screen after selecting 'install ubuntu'. I added nomodeset and xforcevesa to the options to fix that problem. Now when installing, it hangs at 'Configuring Hardware', specifically at ubuntu ubiquity: update-initramfs: Generating /boot/initrd.img-3.5.0-17-generic Specs: Asus UX32a DB51 Intel Core i5 3317U 1.7 GHz 4GB DDR3 RAM intel hd 4000 graphics 500 GB harddrive with 25 GB sandisk ssd I'm trying to install Ubuntu by itself right now on the SSD. I made custom partitions (100 mb EFI boot partition, 4GB swap space, 20GB ext4 mounted on '/') I've tried re-downloading the ubuntu iso and creating a new boot image on my flash drive and it results in the same problem. Thanks in advance for the help!

  Read the article

• Why does installing Grub2 give an "ISO9660: filesystem destruction..." warning?

  - by Ettore

  I have installed Ubuntu 12.04 on my computer, but at the end of the installation it gave me an error and it didn't install grub2. Now I'm trying to install it using the live cd: This is my sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6af447e6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 781459455 390728704 7 HPFS/NTFS/exFAT /dev/sda2 781459456 789272575 3906560 82 Linux swap / Solaris /dev/sda3 789272576 976773119 93750272 83 Linux After mounting and chroot the linux partiton, I give grub-install /dev/sda command, and I get: /usr/sbin/grub-setup: error: hd0 appears to contain a iso9660 filesystem which isn't known to reserve space for DOS-style boot. Installing GRUB there could result in FILESYSTEM DESTRUCTION if valuable data is overwritten by grub-setup (--skip-fs-probe disables this check, use at your own risk). (same error even with grub-install --recheck /dev/sda) What can I do? I also tried boot-repair, but I get this error: http://paste.ubuntu.com/1069353/

  Read the article

• Black screen in kernel 3.8 (not 3.5, 3.11, 3.13)

  - by TheDeeno

  I need to use kernel 3.8 to address some docker compatibility issues. However, after installing this kernel when I attempt to boot my machine I get a black screen. The system appears to boot to the login screen (I hear the drum sounds), but the screen remains black. If I boot into recovery mode the video works, but is buggy/slow. In recover mode it looks like it's using the vesa driver. It'd be great if I can force this in normal mode. My machine has an ivy bridge intel processor with integrated graphics What should I do next to troubleshoot this?

  Read the article

• Ubuntu 12.04 I'm trying to ugrade my Geforce 8400 to Geforce GTX 560, getting a black screen

  - by Stuart Anderson

  I have an NVidia Geforce 8400 which is working fine in Ubuntu 12.04. I have just purchased an NVidia GeForce GTX 560 and have been trying to install it. No matter what I do all I get is a black screen on boot up. I have tried; 1/ Additional Drivers, driver version 295.40, this works for the GeForce 8400 but gives me a black screen with the GTX 560 when I boot. 2/ Downloaded driver version 295.40 from NVidias site, was able to install it successfully, it works with my 8400 but gives me a black screen with the GTX 560 when I boot. Are there any options I can try?

  Read the article

• Can I set Ubuntu 12.10 to automatically reboot to Windows once only?

  - by Bill Tetzeli

  Is there some way when I'm in Ubuntu 12.10 that I can set it to reboot automatically to Windows just once, so that when I'm in Windows I can reboot and it will automatically boot back into Ubuntu? I need this because often when I travel I access my home computer for email and other personal info that I don't want to travel with or leave to the tender mercies of the "cloud". On rare occasions, I need to temporarily boot into Windows 7 to do something Windows-specific, but then I want to be able to boot back into Ubuntu because that's where most of my computing takes place. Any ideas? Thanks in advance! Bill

  Read the article

• Installed Ubuntu using WUBI due to lack of CD Drive

  - by Chantelle

  I have installed 12.04 via WUBI because my computer does not have a CD Drive. Is there any way that I can delete Windows 7 from my computer and use the whole HD for Ubuntu? I ask this question because for one reason or another I cannot boot from a boot-able USB stick (either in Windows or Ubuntu, however the USB port works because I am able to use my cell phone's tethering plan using all the USB ports to connect to the Internet). Edit: Just found out the problem. Eee PC Model 1018p's do not boot from any format other than FAT and FAT16 and not FAT32.

  Read the article

• Logitech Wireless Keyboard & mouse not working aftesr upgrade to 12.04?

  - by deerjay99

  I upgraded my Dell Dimension 9200C to 12.04 Precise Pangolin with no issues, I ran it fine for a night but when I went back in a couple days later my Logitech Wireless Keyboard K350 and M510 mouse weren't active when booted. I can boot into an older version from the main the boot screen the mouse and keyboard work, but the network stack is gone. It says the networking manager on this version is not compatible. I'm scratching my head, it isn't the mouse and keyboard, they work fine on my dual boot, and they load fine in Knoppix. They did work fine on 12.04 for 1 night. Open to suggestions before I re-install completely.

  Read the article

• Acer sound card

  - by Rob Brugh

  Hi I have an acer aspire on a recent upgrade somehow it loaded dummy output into upper memory so every time I boot up I have to manually load my sound card. using sudo /sbin/alsa reload then alsamixer and f6 to change to my proper sound card. How do I go about making that my default sound card loading on boot every time. sometimes the message comes up cannot find alsamixer, if that happens I have to run the following command sudo /sbin/alsa force-reload and then alsamixer. That works only on current session I would like to get that so it boots without coming up with dummy output. anyone out there know what the command is to make that load to boot section?

  Read the article

• Unneeded RAID recovery

  - by Shinhan

  I have two software RAID 5s. Today when I turned on my server (after it was off for two weeks when I was on vacation), I got the message that the software RAID is degraded and was offered RAID recovery console or boot degraded. No idea what to do in that recovery console btw, so I just exited it. After the boot finished normally I took a peak at /proc/mdstat but there is nothing amiss there. So I took a look at mdadm --detail /dev/md0 (and md1) and again everything looks fine with Failed Devices being 0 both times. Next I took a look at smartctl --alll /dev/sdX for all of the drives and Reallocated_Sector_Ct is 0. (Lots of other zeros, all numbers look to me fine) Anybody have any ideas why I'm getting the RAID recovery message on boot when nothing seems bad?

  Read the article

• Can I use WUBI as an offline installer for 12.10?

  - by ning

  Can I use WUBI as an offline installer? I already had the .iso file of ubuntu 12.10 - i386, and inside the iso is wubi.exe. For example: I will do a partition of, E:30gb then i will target E: in wubi so that it will be Ubuntu then use the .iso file to install it on E: My Computer: Acer Aspire 5750-6683 i5-2450m processor Is it fine to do a dual boot? Can I run Windows 7 Home Premium OS, with the custom theme and boot screen, can that effect dual booting? I just don't want to damage any of files or either any of OS And if I can't boot any of the operating systems what should I do? Can I avoid doing a clean install if that ever happens?

  Read the article

• Windows not recognizing its system drive after installing Ubuntu 11.10 alongside with windows 7. What to do?

  - by user53322

  After installing Ubuntu 11.10, it boots perfectly. But when I select Windows 7 from the GRUB menu, it restarts after showing the boot logo. I tried to repair the boot loader but the process failed. Then I decide to repair with system recovery disc. There I realize the system is unable to find any existing system. Then I boot into ubuntu and here I can see all the existing drive (with all content). All drives are still NTFS file system (I have 4 drive: 3 are NTFS another 1 is ext4). Tried to repair with gparted partition tool, but came with no luck. Also tried to reinstall windows but installer don't show any available drive. What to do? (something to do with Ubuntu?)

  Read the article

• System crashed while upgrading, now unable to recover. Please help

  - by longloop

  Yesterday while upgrading from 11.4 to 11.10, due to power cut my system crashed. Ubuntu is unable to boot. While booting I get two options in grub, one is for recovery mode and the other is for normal ubuntu booting (and others are also thr for mem check and booting to windows). When I try to boot it normally, it pauses booting while displaying ' Checking battery statues' . Though i am not using a laptop, I am on a desktop. And In recovery mode the menu has 4 options - resume boot, fsck , remount and root ( to goto shell prompt) . If I go to shell and type ' apt-get dist upgrade' , it shows - W: not using locking for read only lock file /var/lib/dpkg/lock E:unable to write to /var/cache/apt E:The package lists or status files could not be parsed or opened. Please instruct me to recover from this situation.

  Read the article

• Ubuntu 12.04 installer does not recognize Windows 7

  - by trainofk

  I recently purchased an ASUS N56VZ-ES71 laptop which came with Windows 7 Home Premium installed on it. I wish to dual boot Windows 7 and Ubuntu 12.04 on it. I shrank the hard drive partitions to leave about 150 GB unallocated for Ubuntu 12.04. When I boot the Live CD of Ubuntu and attempt to install, the installer does not recognize any other operating systems. Through reading a few questions, I have found that this is due to a GPT partitioning table that Windows uses. I ran boot-repair as per other threads' suggestions. This was my output: http://paste.ubuntu.com/1176988/ I suppose my question is: how do I proceed in order to get the installer to recognize Windows, so that I don't have to erase the current partition table and can get a safe install? Thanks in advance.

  Read the article

• Grub - multiple distros

  - by kveidem

  I had Ubuntu 12.04 BETA installed on my entire HD. Then I decided to also install Linux Mint Debian Edition 121204 (LMDE). With gparted I shrunk my /home to make room for one more distro I created the partitions needed for LMDE, but figured I could use the same swap I installed LMDE - no errors. During install I selected to install GRUB to /dev/sda Grub shows Linux Mint Debian Edition, but no sign of Ubuntu The new LMDE install will not boot I can use LMDE from USB stick, which is what I use right now My Ubuntu /home has data that is not backed up (must recover) If I can boot back into Ubuntu to back up I am OK again. Please help. From gparted (sda8 and sda9 is the new ones after shrinking sda7) /dev/sda1 ext4 20 GB Flags: boot /dev/sda2 extended 912 GB dev/sda5 ext4 20 GB dev/sda6 linux-swap 4 GB dev/sda7 ext4 585 GB dev/sda8 ext4 20 GB dev/sda9 ext4 285 GB

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >