Search Results

Search found 10603 results on 425 pages for 'device emulation'.

Page 197/425 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• Silverlight Cream for November 16, 2011 -- #1167

  - by Dave Campbell

  In this Issue: Michael Crump, Andrea Boschin, Michael Sync, WindowsPhoneGeek(-2-), Erno de Weerd, Jesse Liberty, Derik Whittaker, Antoni Dol, Walter Ferrari, and Jeff Blankenburg(-2-). Above the Fold: Silverlight: "10 Laps around Silverlight 5 (Part 6 of 10)" Michael Crump WP7: "31 Days of Mango | Day #2: Device Status" Jeff Blankenburg Metro/WinRT/W8: "Lighting up your C# Metro apps by being a Share Target" Derik Whittaker Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up SilverlightShow has announced a webinar you probably don't want to miss: Webinar – Introduction to XAML Development on Windows 8 Check out the top 5 from last week at SilverlightShow: SilverlightShow for November 07 - 13, 2011 From SilverlightCream.com: 10 Laps around Silverlight 5 (Part 6 of 10) Michael Crump covers a lot of territory in this Part 6 of his Silverlight 5 Beta series at SilverlightShow: P/Invoke, Multiple Windows, and Full Trust Windows Phone 7.5 - Manipulating camera stream Andrea Boschin has Part 4 of his Mango series up at SilverlightShow. He's discussing accessing the raw stream from the camera and saving it to a file. Blend 4 + VS 2011 (Preview) = Problem? Michael Sync reports a problem with Blend 4 and the VS2011 preview... followed up by a set of scripts that were posted on Connect to make the problem go away (at least for Michael) Windows Phone Toolkit MultiselectList in depth | Part1: key concepts and API WindowsPhoneGeek begins a series on the MultiselectList in the Phone Toolkit... if you've seen his tutorials, you know they're great... this one is no exception.. lots of code, info and notes getting you on-board with the features Getting Started with Windows Phone Alarms WindowsPhoneGeek next takes a sidestep from his new series and has this post on Alarms in WP7 apps .. one of the type of scheduled actions in WP7.1 ... good write-up, pictures and code Using AppHarbor, Bitbucket and Mercurial with ASP.NET and Silverlight – Part 3 Membership and Role Provider in SQL Server Erno de Weerd's part 3 of his series is up... adding Role and Membership to his application... check it out in this 17-step tutorial Yet Another Podcast #51–Shawn Wildermuth: //build, Xaml Programming & Beyond Jesse Liberty has another of his Yet Another Podcasts up and he's talking with Jon Galloway and Shawn Wildermuth... hear what *that* trio has to say about post //BUILD, and all things XAML Lighting up your C# Metro apps by being a Share Target Derik Whittaker continues to work with Metro... evidenced by this post on wiring your app up to be a Share Target .. allowing your app to consume data from other apps Photoshop in METRO style 2: Filters Antoni Dol follows up his Photoshop in Metro post with this one on filters... he's got some great screenshots... was hoping to see a link to the code... maybe I missed it! Silverlight and Sharepoint working together: a Silverlight menu for Sharepoint - Part 1 Walter Ferrari has part 1 of a series up at SilverlightShow talking about Sharepoint and Silverlight, and using Silverlight Navigation in place of what Sharepoint offers up. 31 Days of Mango | Day #2: Device Status Jeff Blankenburg is motoring along on his 31 Days of Mango. This is his Day 2 post and all about DeviceStatus, or just about everything you would like to know about your user's phone 31 Days of Mango | Day #3: Alarms and Reminders Day 3 of Jeff Blankenburg's series is about Alarms and Reminders... a way to alert your user that something needs to be done... you can create, edit, and delete them as needed Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Windows 8 Camp&ndash;Ways to Prepare

  - by Lori Lalonde

  When Windows 8 was announced at the BUILD conference back in September, it created quite a buzz among the developer community. By the spring of 2012,  Windows 8 Developer Camps started popping up everywhere imaginable. I received a lot of questions from CTTDNUG members about whether or not we would be hosting one locally. If you recall my post about the Windows Phone/Azure Developer Workshop that CTTDNUG hosted back in March, you’ll remember that the biggest hurdle to overcome when planning this type of event was finding the right venue. It took some time, but I finally found a venue that was available and provided the prerequisites needed to ensure this camp is a success. I am very excited that CTTDNUG will be hosting a Windows 8 Camp this summer in the Kitchener/Waterloo area. In fact, it’s coming up in less than 2 weeks. Clearly other developers are excited as well, because our registration numbers show that the event is already 70% full! On top of that, I was fortunate enough to also book two well-known evangelists to present and teach at this full day developer camp: Andrei Marukovich and Atley Hunter. This was the icing on the cake. With the content provided by Microsoft, and two local experts that live and breathe Windows 8 development, I know that I, along with other developers that attend this event, will have the opportunity to maximize our learning potential and hit the ground running. If you plan on attending a Windows 8 Developer Camp soon, and want to ensure you get the most “bang for your buck” (figuratively speaking, since these camps are free), there are some things you can do to prepare before the big day: 1) Install the prerequisites on your own device before the big day I can’t stress this enough. Otherwise, you will be spending valuable time during the hands-on period downloading and installing what is needed, rather than digging into the development and using that time to ask the experts on-hand about programming challenges, issues, questions you may have with respect to your development. Prerequisites: Windows 8 Release Preview Visual Studio 2012 RC Download the Windows 8 SDK Samples 2) Purchase, download, and read Charles Petzold’s newest book:  Programming Windows 6th Edition This is a great introduction to the type of content you will be learning about during the camp. Doing some light reading beforehand might raise some questions about the concepts discussed in the book, which will give you the opportunity to write them down and bring them with you to the camp. The experts on hand will be able to answer them for you. 3) Make use of the freebies that are available Telerik has recently released a preview of their RadControls for Metro. You can sign up to receive a license code to give you access to install the preview for free and start playing around with it. Syncfusion also offers a free download of their Metro Studio package, which is a collection of metro style icons that you can customize and use in your own applications. Last but not least, once you’ve installed the Windows 8 Release Preview on your own device, go to the Windows 8 Store and download a handful of the free apps that are available. Testing out other Metro apps may give you ideas of what you can do in your own apps and analyze what features you like: application flow, type of animations used, concepts that were leveraged, how live tiles were used, etc. I hope you found these tips to be useful as you embark on a new development journey! Although this post focused on how to prepare for a Windows 8 camp, the same ideas are there whichever developer camp/workshop/event you attend. Learning does not begin and end on the day of the event. Attending a developer camp is just one step of many to master whatever technology you are interested in. It is a continuous process, which is fully maximized when you do your homework beforehand, actively participate during,  and follow up by putting what you learned to practice afterwards. Happy coding!

  Read the article

• Nest reinvents smoke detectors. Introduces smart and talking smoke detector that keeps quite when you wave

  - by Gopinath

  Nest, the leading smart thermostat maker has introduced a smart home device today- Nest Protect, a smart, talking smoke & carbon monoxide detector that can quite when you wave your hand. Less annoyances and more intelligence Smoke detectors are around for hundreds of years and playing a major role in providing safety from fire accidents at home. But the technology of these devices is stale and there is no major innovation for the past several years. With the introduction of Nest Protect, the landscape of smoke detectors is all set to change just like how Nest thermostat redefined the industry two years ago. Nest Protect is internet enabled and equipped with motion- and smoke-detection sensors so that when it starts beeping you can silence it by waving hand instead of doing circus feats to turn off the alarm. Everyone who cooks in a home equipped with smoke detector would know how annoying it is to turn off sensitive smoke detectors that goes off control quite often. Apart from addressing the annoyances of regular smoke detector, Nest Protect has talking capabilities. It can alert users with clear & actionable instructions when it detects a danger. Instead of harsh beeps it actually speak to you so you know what is happening. It will tell you what smoke it has detected and in which room it is detected. Multiple Nest Protects installed in a home can communicate with each other. Lets say that there is a smoke in bed room, the Nest Protect installed in bed room shares this information to all Nest Protects installed in the home and your kitchen device can alert you that there is a smoke in bed room. There is an App for that The internet enabled Nest Protect has an app to view its status and various alerts. When the Protect is running on low battery it alerts you to replace them soon. If there is a smoke at home and you are away, you will get message alerts. The app works on all major smartphones as well as tablets. Auto shuts down gas furnaces/heaters on smoke Apart from forming a network with other Nest Protect devices installed at home, they can also communicate with Nest Thermostat if it is installed. When carbon monoxide is detected it can shut off your gas furnace automatically. Also with the help of motion detectors it improves Nest Thermostat’s auto-away functionality. It looks elegant and costs a lot more than a regular smoke detector Just like Nest Thermostat, Nest Protect is elegant and adorable. You just fall in love with it the moment you see it. It’s another master piece from the designer of Apple’s iPod. All is good with the Nest Protect, except the price!! It costs whooping $129, which is almost 4 times more expensive than the best selling conventional thermostats available at $30. A single bed room apartment would require at least 3 detectors and it costs around $390 to install Nest Protects compared to 90$ required for conventional smoke detectors. Though Nest Thermostat is an expensive one compared to conventional thermostats, it offered great savings through its intelligent auto-away feature. Users were able to able to see returns on their investments. If Nest Protect also can provide good return on investment the it will be very successful.

  Read the article

• Windows Phone 7 Silverlight / XNA development talk

  - by subodhnpushpak

  Hi, I presented on Windows Phone 7 app development using Silverlight. Here are few pics from the event Windows Phone 7 development VIEW SLIDE SHOW DOWNLOAD ALL     I demonstrated the Visual studio, emulator capabilities/ features. An demo on Wp7 app communication with an OData Service, along with a demo on XNA app. There was lot of curious questions; I am listing them here because these keep on popping up again and again: 1. What tools does it takes to develop Wp7 app? Are they free? A typical WP7 app can be developed either using Silverlight or XNA. For developers, Visual Studio 2010 is a good choice as it provides an integrated development environment with lots of useful project templates; which makes the task really easy. For designers, Blend may be used to develop the UI in XAML. Both the tools are FREE (express version) to download and very intuitive to use. 2. What about the learning curve? If you know C#, (or any other programming language), learning curve is really flat. XAML (used for UI) may be new for you, but trust me; its very intuitive. Also you can use Microsoft Blend to generate the UI (XAML) for you. 3. How can I develop /test app without using actual device? How can I be sure my app runs as expected on actual device? The WP7 SDK comes along with an excellent emulator; which you can use for development/ testing on a computer. Later you can just change a setting and deploy the application on WP7. You will require Zune software for deploying the application on phone along with Developers key from WP7 marketplace. You can obtain key from marketplace by filling a form. The whole process for registering  is easy; just follow the steps on the site. 4. Which one should I use? Silverlight or XNA? Use Silverlight for enterprise/ business / utility apps. Use XNA for Games app. While each platform is capable / strong and may be used in conjunction as well; The methodologies used for development in these platforms are very different. XNA works on typical Do..While loop where as Silverlight works on event based methodology. 5. Where are the learning resources? Are they free? There is lots of stuff on WP7. Most of them are free. There is a excellent free book by Charles Petzold to download and http://www.microsoft.com/windowsphone is full of demos /todos / vidoes. All the exciting stuff was captured live and you can view it here; in case you were not able to catch it live!! @ http://livestre.am/AUfx. My talk starts from 3:19:00 timeline in the video!! Is there an app you miss on WP7? Do let me know about it and I may work on it for free !!! Keep discovering. Keep is Simple. WP7. Subodh

  Read the article

• Unable to make properly work the Ralink rt3090 wifi card on my Lenovo B575 with Kubuntu 12.04 64bit

  - by Sebastien

  I look and tried many solution from many thread but I still unable to make this wifi card work properly (very slow, unable to connect to some wifi spot, etc.). I tried to compile the driver from the ralink website but it doesn't work. Tried to blacklist many mod, withou any result. So here are some command results, hope their help you help me: lspci sebastien@sebastien-portable:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) 00:15.2 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe lsmod sebastien@sebastien-portable:~$ lsmod Module Size Used by rt2800pci 18715 0 arc4 12529 2 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 55301 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci rt2860sta 864748 0 snd_hda_codec_conexant 62128 1 snd_hda_codec_hdmi 32474 1 uvcvideo 72627 0 rts5139 351143 0 snd_hda_intel 33773 4 videodev 98259 1 uvcvideo snd_hda_codec 127706 3 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec psmouse 87692 0 v4l2_compat_ioctl32 17128 1 videodev serio_raw 13211 0 k10temp 13166 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec sp5100_tco 13791 0 i2c_piix4 13301 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi ideapad_laptop 18234 0 sparse_keymap 13890 1 ideapad_laptop rfcomm 47604 0 joydev 17693 0 snd_seq_midi_event 14899 1 snd_seq_midi bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 18 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd mac_hid 13253 0 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 radeon 804372 4 video 19596 0 wmi 19256 0 ttm 76949 1 radeon drm_kms_helper 46978 1 radeon drm 242038 6 radeon,ttm,drm_kms_helper i2c_algo_bit 13423 1 radeon iwconfig sebastien@sebastien-portable:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"4CE6763F0E0A" Mode:Managed Frequency:2.452 GHz Access Point: 4C:E6:76:3F:0E:0A Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:100 Missed beacon:0 eth0 no wireless extensions.

  Read the article

• MIX 2010 Covert Operations Day 3

  - by GeekAgilistMercenary

  I rolled over to the Mandalay for breakfast.  There I met a couple guys that were really excited about the new Windows 7 Phone.  They, as I, are also hopeful that the phone really gets a big push and some penetration into the market.  Not because we don’t like any other of the phones, but because this phone is so much better in many ways.  From a developer's perspective creating applications in Windows 7 Mobile will be vastly superior in ease, capabilities, and other aspects.  The architectural, existing code base, examples, and provisions to create things on the 7 Mobile Device are already existing as of RIGHT NOW.  There is no reason, except for fickle market conditions, for this phone to not just explode onto the market.  But alas, I won't hold my breath. Day three keynote had a whole new slew of things provided.  It also seemed that things got a lot more technical on this second keynote.  The oData was one of the very technical bits, yet it included almost no code.  Starting with a Netflix example and all the way to the Codename "Dallas" effort the oData Services provide some expansive possibilities. A mash up going 4 ways was then shown for finding a movie, finding local places to have a viewing, and information about the movie and were to prospectively find and buy additional movie bits.  The display was of course, in a Windows 7 Mobile device with literally a click to view each set of data.  The backend and the front end of this was beautifully smooth. The Dallas Project has a lot of potential for analytics in dashboard and scorecard creation also.  If there is a need or reason to provide data to a vast and wide range of clients, Dallas is a prime example of how to do that. Azure Clouds After the main keynote I checked out (while developing a working WPF & Silverlight Application for work) the session on deploying ASP.NET Applications, services, etc, into the cloud.  The session was pretty good, but I'll admit I got a little unfocused from it a few times.  It is after all hard to do two things at one time. I did take note that the cloud still is a multiple step process for deploying to.  This is a good thing and a bad thing.  There needs to be more checks and verifications when deploying something into the cloud just for technical reasons.  However, I feel that there should be some streamlining to the process.  Going back and forth between web and Visual Studio as the interface also seems kind of clunky.  Deployment should be able to be completed from within Visual Studio in my perspective.  Overall, the cloud is getting more and more impressive in function as well as theory. That's it from me so far on the third day of MIX.  I'll be note taking and studying hard to have more good tidbits to provide. Thanks for reading, if you're curious about more of my writing, check out this original entry at my other blog Agilist Mercenary.

  Read the article

• Converting a PV vm back into an HVM vm

  - by wim.coekaerts

  I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

  Read the article

• Converting a PV vm back into an HVM vm

  - by wim.coekaerts

  I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

  Read the article

• Swap not available on System Monitor

  - by Zaki

  I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

  Read the article

• Can't boot in Ubuntu after windows upgrade

  - by VanceAnce

  After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

  Read the article

• Microsoft Build 2012 Day 1 Keynote Summary

  - by Tim Murphy

  So I have finally dried the tears after watching the Keynote for Build 2012.  This wasn’t because it was an emotional presentation, but because for the second year I missed the goodies.  Each on site attendee got a Surface RT, a Lumia 920 and a voucher for 100GB of SkyDrive storage. The event was opened with the announcement that in the three days since the launch of Windows 8 over 4 million upgrades have been sold.  I don’t care who you are that is an impressive stat.  Ballmer then spent a fair amount of time remaking the case for the Windows and Windows Phone platforms similar to what we have heard over the last to launch events. There were some cool, but non-essential demos.  The one that was the most fun was the Perceptive Pixel 82” slate device.  At first glance I wondered why I would ever want such a device, but then Ballmer explained it’s possible use for schools and boardrooms.  The actually made sense. Then things got strange.  Steve started explaining features that developers could leverage.  Usually this type of information is left to the product leads.  He focused on the integration with the Charms features such as Search and Share. Steve “Guggs” Guggenheim showed off an app that would appeal to my kids from Disney called “Agent P” which is base on Phineas and Ferb.  Then he got to the meat of the presentation.  We found out that you could add a tile that can be used to sell ad space.  In the same vein we also found out that you could use Microsoft’s, Paypal’s or any commerce engine of your own creation or choosing. For those who are interested in sports and especially developing sports apps you would have found the small presentation from Michael Bayle of ESPN.  He introduced the ESPN app which has tons of features.  For the developers in the crowd he also mentioned that ESPN has an API available at developer.espn.com. During the launch events we were told apps were coming.  In this presentation we were actually shown a scrolling list of logos and told about a couple of them.  Ballmer mentioned specifically Twitter, SAP and DropBox.  These are impressive names that were just a couple of the list impressive names. Steve Ballmer addressed the question of why you should develop for the Windows 8 platform.  He feels that Microsoft has the best commercial terms for developers, a better way to build apps than other platforms and a variety of form factors.  His key point though was the available volume of customers given the current Windows install base and assuming even a flat growth of the platform.  This he backed with a promise that Microsoft is going to do better at marketing and you won’t be able to avoid the ads that they are bringing out. The last section of the key note was present by Kevin Gallo from the Windows Phone team.  This was the real reason I tuned into the webcast.  He impressed upon those watching that the strength of developing for the Microsoft platform is the common programming model that now exist.  While there are difference between form factor implementations you can leverage code across them. He claimed that 90% of developer requests for Windows Phone 8 had been implemented.  These include: More controls with better performance Better live tiles including lock screen integration Speech support in custom apps Easier submission to the market place App camera integration VOIP and chat support Bluetooth and NFC support Native C++ development Direct 3D development   The quote from Kevin that stood out for me was that “Take your Dramamine and buckle your seatbelt type of games are coming to Windows Phone 8”.  He back this up by displaying a list of game development frameworks and then having Unity come out and do a demo. Ok, almost done … The last two things of note for me were the announcement that the SDK is immediately available at dev.windowsphone.com and that they were reducing the cost of an individual developer account to $8 for the next 8 days. Let the development commence. del.icio.us Tags: Build 2012,Windows 8,Windows Phone 8,Windows Phone

  Read the article

• Mind Reading with the Raspberry Pi

  - by speakjava

  Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi".  As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi.  This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky.  I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology.  At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready.  The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up.  Part of Neurosky's innovation is the development of this simple dry-sensor technology.  Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication.  Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0.  Neurosky have published details of the command protocol.  In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going.  Back in the dim distant past there was the Java Comm API.  Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm.  This can be installed easily on the Pi using sudo apt-get install librxtx-java.  Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset.  The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset.  You can download a complete NetBeans project for this here.  This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux.  I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset.  Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi.  I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX.  Yet another NetBeans project is available here.  Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on.  Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

  Read the article

• XNA RenderTarget2D Sample

  - by Michael B. McLaughlin

  I remember being scared of render targets when I first started with XNA. They seemed like weird magic and I didn’t understand them at all. There’s nothing to be frightened of, though, and they are pretty easy to learn how to use. The first thing you need to know is that when you’re drawing in XNA, you aren’t actually drawing to the screen. Instead you’re drawing to this thing called the “back buffer”. Internally, XNA maintains two sections of graphics memory. Each one is exactly the same size as the other and has all the same properties (such as surface format, whether there’s a depth buffer and/or a stencil buffer, and so on). XNA flips between these two sections of memory every update-draw cycle. So while you are drawing to one, it’s busy drawing the other one on the screen. Then the current update-draw cycle ends, it flips, and the section you were just drawing to gets drawn to the screen while the one that was being drawn to the screen before is now the one you’ll be drawing on. This is what’s meant by “double buffering”. If you drew directly to the screen, the player would see all of those draws taking place as they happened and that would look odd and not very good at all. Those two sections of graphics memory are render targets. All a render target is, is a section of graphics memory to which things can be drawn. In addition to the two that XNA maintains automatically, you can also create and set your own using RenderTarget2D and GraphicsDevice.SetRenderTarget. Using render targets lets you do all sorts of neat post-processing effects (like bloom) to make your game look cooler. It also just lets you do things like motion blur and lets you create mirrors in 3D games. There are quite a lot of things that render targets let you do. To go along with this post, I wrote up a simple sample for how to create and use a RenderTarget2D. It’s available under the terms of the Microsoft Public License and is available for download on my website here: http://www.bobtacoindustries.com/developers/utils/RenderTarget2DSample.zip . Other than the ‘using’ statements, every line is commented in detail so that it should (hopefully) be easy to follow along with and understand. If you have any questions, leave a comment here or drop me a line on Twitter. One last note. While creating the sample I came across an interesting quirk. If you start by creating a Windows Game, and then make a copy for Windows Phone 7, the drop-down that lets you choose between drawing to a WP7 device and the WP7 emulator stays grayed-out. To resolve this, you need to right click on the Windows Phone 7 version in the Solution Explorer, and choose “Set as StartUp Project”. The bar will then become active, letting you change the target you which to deploy to. If you want another version to be the one that starts up when you press F5 to start debugging, just go and right-click on that version and choose “Set as StartUp Project” for it once you’ve set the WP7 target (device or emulator) that you want.

  Read the article

• Oracle Retail Mobile Point-of-Service

  - by David Dorf

  When most people discuss mobile in retail, they immediately go to shopping applications.  While I agree the consumer side of mobile is huge, I believe its also important to arm store associates with mobile tools.  There are around a dozen major roll-outs of mobile POS to chain retailers, and all have been successful.  This does not, however, signal the demise of traditional registers.  Retailers will adopt mobile POS slowly and reduce the number of fixed registers over time, but there's likely to be a combination of both for the foreseeable future.  Even Apple retains at least one fixed register in every store, you just have to know where to look. The business benefits for mobile POS are pretty straightforward: 1. Faster checkout.  Walmart's CFO recently reported that for every second they shave off the average transaction time, they can potentially save $12M a year in labor.  I think its more likely that labor will be redeployed to enhance the customer experience. 2. Smarter associates.  The sales associates on the floor need the same access to information that consumers have, if not more.  They need ready access to product details, reviews, inventory, etc. to meet consumer expectations.  In a recent study, 40% of consumers said a savvy store associate can impact their final product selection more than a website. 3. Lower costs.  Mobile POS hardware (iPod touch + sled) costs about a fifth of fixed registers, not to mention the reclaimed space that can be used for product displays. But almost all Mobile POS solutions can claim those benefits equally.  Where there's differentiation is on the technical side.  Oracle recently announced availability of the Oracle Retail Mobile Point-of-Service, and it has three big technology advantages in the market: 1. Portable. We used a popular open-source component called PhoneGap that abstracts the app from the underlying OS and hardware so that iOS, Android, and other platforms could be supported.  Further, we used Web technologies such as HTML5 and JavaScript, which are commonly known by many programmers, as opposed to ObjectiveC which is more difficult to find.  The screen can adjust to different form-factors and sizes, just like you see with browsers.  In the future when a new, zippy device gets released, retailers will have the option to move to that device more easily than if they used a native app. 2. Flexible.  Our Mobile POS is free with the Oracle Retail Point-of-Service product.  Retailers can use any combination of fixed and mobile registers, and those ratios can change as required.  Perhaps start with 1 mobile and 4 fixed per store, then transition over time to 4 mobile and 1 fixed without any additional software licenses.  Our scalable solution supports lots of combinations. 3. Consistent.  Because our Mobile POS is fully integrated to our traditional POS, the same business logic is reused.  Third-party Mobile POS solutions often handle pricing, promotions, and tax calculations separately leading to possible inconsistencies within the store.  That won't happen with Oracle's solution. For many retailers, Mobile POS can lower costs, increase customer service, and generally enhance a consumer's in-store experience.  Apple led the way, but lots of other retailers are discovering the many benefits of adding mobile capabilities in their stores.  Just be sure to examine both the business and technology benefits so you get the most value from your solution for the longest period of time.

  Read the article

• Booting the liveCD/USB in EFI mode fails on Samsung Tablet XE700T1A

  - by F.L.

  My tablet is Samsung Series 7 Slate (XE700T1A-A02FR (French Language)). It operates an Intel Sandy Bridge architecture. The main issue about this tablet is that it ships with an installed Windows 7 in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. [2012-09-27] I have used the Ubuntu 12.04.1 Desktop ISO (I have read somewhere that it is the only one that can boot in EFI mode). I'd say this has something to do with UEFI since the LiveCD boots in bios mode but not in efi mode. Besides, I am not sure my boot info will help, since I can't boot the LiveCD in EFI mode. As a result I can't install ubuntu in EFI mode. So it would be the boot info from the liveCD boot in bios mode. This happens on a ubuntu-12.04.1-desktop-amd64 iso used on a LiveUSB. Live USB was created by dd'ing the iso onto the full disk device (i.e. /dev/sdx no number) of the Flash drive. I have also tried copying the LiveCD files on a primary GPT partition, but with no luck, I just get the grub shell, no menu, no install option. [2012-09-28] I tried today a flash drive created with Ubuntu's Startup Disk Creator and the alternate 12.04.1 64 bit ISO. I get a grub menu in text mode (which meens it did start in efi mode) with install options / test options. But when I start any of these, I simply get a black screen (no cursor, neither mouse nor text-mode cursor). I tried removing the 'quiet' option and adding nomodeset and acpi=off, but it didn't do any good. So this is the same result as for the LiveCD. [2012-10-01] I have tried with a version of the secure remix version via usb-creator-gtk. The boot on the USB key has the same symptoms. Boot in EFI mode is impossible (I have menu but whatever entry I choose, I get the blank screen problem). The boot in BIOS mode works, I did the install. Then I used boot-repair to try installing grub-efi and get a system that would boot in efi mode. But I can't boot this system, because the EFI firmware doesn't seem to detect that sda contains a valid efi partition. Here is the resulting boot-info Boot info 1253554 [2012-10-01] Today, I have reinstalled the pre-shipped version of windows 7, and then installed ubuntu from a secure-remix iso dumped on USB flash drive vie usb-creator-gtk booted in BIOS mode. When install ended, I said "continue testing" then I used boot-repair to try get the bootloader installed. Now, when I boot the tablet, I get the grub menu, it can chainload windows 7 flawlessly. But when I try to start one of the ubuntu options I get the same old blank screen. Here is the new boot-info: Boot info 1253927 [2012-10-01] I tried installing the 3.3 kernel by chrooting a live usb boot (secure remix again) into the installed system. Same symptoms. I feel the key to this is that the device's efi firmware (which is EFI v2.0) would expose the graphics hardware in a way that prevents the kernel to initialize it, and thus prevents it from booting (the kernel stops all drive access just after the screen turns kind of very dark purple). Here is some info on the UEFI firmware as given by rEFInd: EFI revision: 2.00 Platform: x86_64 (64 bit) Firmware: American Megatrends 4.635 Screen Output: Graphics Output (UEFI), 800x600 [2012-10-08] This week end I tried loading the kernel with elilo. Eventhough I didn't have more luck on booting the kernel, elilo gives more info when loading the kernel. I think the next step is trying to load a kernel with EFI stub directly.

  Read the article

• UPOS RFIDScanner data format

  - by Robert Snyder

  A lot of work that I do currently is based in the OPOS/UPOS world. My company has a device that can read 13.56Mhz tags (RFID), Smart Cards, and Mag Stripe cards. Up until somewhat recently I have only been working with RFID for a very specific scenario. That was to read UltraLight C and Desfire cards. These cards were all setup very specifically so that I could take the data read from those cards and force it into a MSR track2 format. The past couple of weeks, however, I have been working on reading RFID credit cards (since I have a Visa card I've been using mine), and Smart Card credit cards. (The visa card I have has both) In learning how to communicate with SmartCard and reading ISO7816 and EMVCO documents I became a little more familiar with how info is stored. But now I have a question regarding UPOS. The RFID data on my Visa is stored (and read) very similar to how the data is stored and read from the Smart Card on my Visa. Cool. Well in the UPOS spec for SmartCardRW the ReadData method returns a byte array. That's cool, I can just return all that data and then parse it as my heart desires. The RFID though has a LinkedList of Tags. Well this makes sense in terms of my Visa card (reminds me of a question I have in regards to SmartCard, but that is for another question) but what about ULC and Desfire, or for that matter any Mifare card. Pages, Files, Purses don't exactly fit the Tag profile. For instance lets just say I read pages 4-12 on my ULC card. Each page I read is 4 bytes long. Does this mean I have 9 tags in my LinkedList? Is my Tag id the page number? Or then how does that translate to Desfire? I open application 123456 and read file 1 and file 2, Do I have 2 tags? and if so what is my tag id? At least with my Visa I think that I have to use the Tag id (ex 5F24 for my expiration date) and value of {0x15, 0x10, 0x31} Part of me says yes..that makes sense. Another part of me says, "well if that is the case then why doesn't SmartCardRW have Tags?" So that is my question. How do I format my data from those different types of media? or is that the job of my Control Object (the application)? Is so how does it know? The only protocols I have are: // Summary: // Enumerates the available predefined RFID tag protocols the device supports. [Flags] public enum RFIDProtocols { EpcClass0 = 1, RFIDSdt0Plus = 2, EpcClass1 = 4, EpcClass1Gen2 = 8, EpcClass2 = 16, Iso14443A = 4096, Iso14443B = 8192, Iso15693 = 12288, Iso180006B = 16384, Other = 16777216, All = 1073741824, } If I use that well all of my cards that I have are all Iso14443A. I use the ATQA and the SAK to know what type of card I really have. There is no RFID property that lets me specify that. So I'm lost.

  Read the article

• Personal Financial Management – The need for resuscitation

  - by Salil Ravindran

  Until a year or so ago, PFM (Personal Financial Management) was the blue eyed boy of every channel banking head. In an age when bank account portability is still fiction, PFM was expected to incentivise customers to switch banks. It still is, in some emerging economies, but if the state of PFM in matured markets is anything to go by, it is in a state of coma and badly requires resuscitation. Studies conducted around the year show an alarming decline and stagnation in PFM usage in mature markets. A Sept 2012 report by Aite Group – Strategies for PFM Success shows that 72% of users hadn’t used PFM and worse, 58% of them were not kicked about using it. Of the rest who had used it, only half did on a bank site. While there are multiple reasons for this lack of adoption, some are glaringly obvious. While pretty graphs and pie charts are important to provide a visual representation of my income and expense, it is simply not enough to encourage me to return. Static representation of data without any insightful analysis does not help me. Budgeting and Cash Flow is important but when I have an operative account, a couple of savings accounts, a mortgage loan and a couple of credit cards help me with what my affordability is in specific contexts rather than telling me I just busted my budget. Help me with relative importance of each budget category so that I know it is fine to go over budget on books for my daughter as against going over budget on eating out. Budget over runs and spend analysis are post facto and I am informed of my sins only when I return to online banking. That too, only if I decide to come to the PFM area. Fundamentally, PFM should be a part of my banking engagement rather than an analysis tool. It should be contextual so that I can make insight based decisions. So what can be done to resuscitate PFM? Amalgamation with banking activities – In most cases, PFM tools are integrated into online banking pages and they are like chapter 37 of a long story. PFM needs to be a way of banking rather than a tool. Available balances should shift to Spendable Balances. Budget and goal related insights should be integrated with transaction sessions to drive pre-event financial decisions. Personal Financial Guidance - Banks need to think ground level and see if their PFM offering is really helping customers achieve self actualisation. Banks need to recognise that most customers out there are non-proficient about making the best value of their money. Customers return when they know that they are being guided rather than being just informed on their finance. Integrating contextual financial offers and financial planning into PFM is one way ahead. Yet another way is to help customers tag unwanted spending thereby encouraging sound savings habits. Mobile PFM – Most banks have left all those numbers on online banking. With access mostly having moved to devices and the success of apps, moving PFM on to devices will give it a much needed shot in the arm. This is not only about presenting the same wine in a new bottle but also about leveraging the power of the device in pushing real time notifications to make pre-purchase decisions. The pursuit should be to analyse spend, budgets and financial goals real time and push them pre-event on to the device. So next time, I should know that I have over run my eating out budget before walking into that burger joint and not after. Increase participation and collaboration – Peer group experiences and comments are valued above those offered by the bank. Integrating social media into PFM engagement will let customers share and solicit their financial management experiences with their peer group. Peer comparisons help benchmark one’s savings and spending habits with those of the peer group and increases stickiness. While mature markets have gone through this learning in some way over the last one year, banks in maturing digital banking economies increasingly seem to be falling into this trap. Best practices lie in profiling and segmenting customers, being where they are and contextually guiding them to identify and achieve their financial goals. Banks could look at the likes of Simple and Movenbank to draw inpiration from.

  Read the article

• Grub2 : Windows 7 can't boot installing with Ubuntu 10.04 on different hard drive

  - by dellphi

  I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. ================ fdisk -l ================================ dellph1@dellph1-desktop:~$ fdisk -l omitting empty partition (5) Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00087dec Device Boot Start End Blocks Id System /dev/sda1 * 1 23104 185582848+ 7 HPFS/NTFS /dev/sda2 23105 121601 791177122 5 Extended /dev/sda5 36107 74408 307660783+ 7 HPFS/NTFS /dev/sda6 74409 100081 206218341 7 HPFS/NTFS /dev/sda7 100082 121601 172859368+ 7 HPFS/NTFS Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6d43dfb2 Device Boot Start End Blocks Id System /dev/sdb1 1 10030 80560066 5 Extended /dev/sdb5 * 1 5560 44657601 83 Linux /dev/sdb6 5560 9387 30736384 83 Linux /dev/sdb7 9387 10030 5164032 82 Linux swap / Solaris dellph1@dellph1-desktop:~$ ================= grub.cfg ================== # DO NOT EDIT THIS FILE # It is automatically generated by /usr/sbin/grub-mkconfig using templates from /etc/grub.d and settings from /etc/default/grub # BEGIN /etc/grub.d/00_header if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=5 fi END /etc/grub.d/00_header BEGIN /etc/grub.d/05_debian_theme insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 insmod jpeg if background_image /usr/share/backgrounds/CurlsbyCandy.jpg ; then set color_normal=white/black set color_highlight=black/light-gray else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi END /etc/grub.d/05_debian_theme BEGIN /etc/grub.d/10_linux menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 linux /boot/vmlinuz-2.6.32-24-generic root=UUID=2f014a3a-35f3-4d05-87aa-34ca677160b7 ro splash vga=795 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap initrd /boot/initrd.img-2.6.32-24-generic } menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 echo 'Loading Linux 2.6.32-24-generic ...' linux /boot/vmlinuz-2.6.32-24-generic root=UUID=2f014a3a-35f3-4d05-87aa-34ca677160b7 ro single splash vga=795 echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-24-generic } END /etc/grub.d/10_linux BEGIN /etc/grub.d/30_os-prober menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod ntfs set root='(hd0,1)' search --no-floppy --fs-uuid --set 5cac2139ac210f58 chainloader +1 } END /etc/grub.d/30_os-prober BEGIN /etc/grub.d/40_multisystem Ajout de MultiSystem MULTISYSTEM MENU menuentry "PLoP Boot Manager" { linux16 /boot/plpbt } menuentry "Smart Boot Manager" { search --set -f /boot/sbootmgr.dsk linux16 /boot/memdisk initrd16 /boot/sbootmgr.dsk } FIN MULTISYSTEM MENU END /etc/grub.d/40_multisystem ================================================ I want to keep the Grub on the second HDD. I have been using the Startup Manager, Boot Manager and Grub Customizer, and this problem still unsolved. The easiest thing that I can possibly do is to install Grub on first HDD, but I was curious and maybe someone can help.

  Read the article

• Making it GREAT! Oracle Partners Building Apps Workshop with UX and ADF in UK

  - by ultan o'broin

  Yes, making is what it's all about. This time, Oracle Partners in the UK were making great looking usable apps with the Oracle Applications Development Framework (ADF) and user experience (UX) toolkit. And what an energy-packed and productive event at the Oracle UK, Thames Valley Park, location it was. Partners learned the fundamentals of enterprise applications UX, why it's important, all about visual design, how to wireframe designs, and then how to build their already-proven designs in ADF. There was a whole day on mobile apps, learning about mobile design principles, free mobile UX and ADF resources from Oracle, and then trying it out. The workshop wrapped up with the latest Release 7 simplified UIs, Mobilytics, and other innovations from Oracle, and a live demo of a very neat ADF Mobile Android app built by an Oracle contractor. And, what a fun two days both Grant Ronald of ADF and myself had in running the workshop with such a great audience, too! I particularly enjoyed the wireframing and visual design sessions interaction; and seeing some outstanding work done by partners. Of note from the UK workshop were innovative design features not seen before and made me all the happier that developers were bringing their own ideas from the consumer IT world of mobility, simplicity, and social to the world of work apps in a smart way within an enterprise methodology too.  Partner wireframe exercise. Applying mobile design principles and UX design patterns means you've already productively making great usable apps! Next, over to Oracle ADF Mobile with it! One simple example from the design of a mobile field service app was that participants immediately saw how the UX and device functionality of the super UK-based app Hailo app could influence their designs (the London cabbie influence maybe?), as well as how we all use maps, cameras, barcode scanners and microphones on our phones could be used in work. And, of course, ADF Mobile has the device integration solutions there too! I wonder will U.S. workshops in Silicon Valley see an Uber UX influence (LOL)! That we also had partners experienced with Oracle Forms who could now offer a roadmap from Forms to Simplified UI and Mobile using ADF, and do it through through the cloud, really made this particular workshop go "ZING!" for me. Many thanks to the Oracle PartnerNetwork (OPN) team for organizing this event with us, and to the representatives of the Oracle Partners that showed and participated so well. That's what I love out this outreach. It's a two-way, solid value-add for all. Interested? Why would partners and developers with ADF skills sign up for this workshop? Here's why: Learn to use the Oracle Applications User Experience design patterns as the usability building blocks for applications development in Oracle Application Development Framework. The workshop enables attendees to build modern and visually compelling desktop and mobile applications that look and behave like Oracle Cloud Applications, and that can co-exist with partner integrations, new, or existing applications deployments. Partners learn to offer customers and clients more than just coded functionality; instead they can provide a complete user experience with a roadmap for continued ROI from applications that also creating more business and attracts the kudos and respect from other makers of apps as they're wowed by the results. So, if you're a partner and interested in attending one of these workshops and benefitting from such learning, as well as having a platform to show off some of your own work, stay well tuned to your OPN channels, to this blog, to the VoX blog, and to the @usableapps Twitter account too. Can't wait? For developers and partners, some key mobile resources to explore now Oracle ADF Mobile UX Patterns and Components Wiki Oracle ADF Academy (Mobile) Oracle ADF Insider Essentials Oracle Applications Mobile User Experience Design Patterns and Guidance

  Read the article

• Drivers for Atheros AR928X?

  - by Pato7

  I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• Ubuntu 12.10 no network and no graphics

  - by khasiKoMasu

  I recently upgraded Ubuntu 12.04 to 12.10 only to find out that it won't connect to any network, neither wired nor wireless and the graphics is messed up too as in a low screen resolution. For 12.04, my system was running perfectly. I don't know why upgrade messed it up so bad. Reinstalling the OS is an issue because I have set up a lot of development environments that I cannot afford to set it up again. Some of the outputs: lspci -nn | grep 0200 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) nm-tool NetworkManager Tool State: disconnected cat /etc/network/interfaces auto lo iface lo inet loopback sudo cat /var/log/syslog | grep etwork | tail -n20 Nov 2 13:50:22 Cobalt NetworkManager[978]: SCPlugin-Ifupdown: (-1240454760) ... get_connections (managed=false): return empty list. Nov 2 13:50:22 Cobalt NetworkManager[978]: Ifupdown: get unmanaged devices count: 0 Nov 2 13:50:22 Cobalt bluetoothd[1016]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> modem-manager is now available Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> Networking is enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt kernel: [ 28.688167] type=1400 audit(1351882222.452:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1046 comm="apparmor_parser" Nov 2 13:50:22 Cobalt bluetoothd[1062]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1118]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1237]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) ps aux | grep -i network root 978 0.0 0.1 23732 4808 ? Ssl 13:50 0:00 NetworkManager sudo modprobe -r forcedeth FATAL: Module forcedeth not found

  Read the article

• iPhone: image in table cell - wrong position & not scaled correctly in iPhone 3.0

  - by Karsten Silz

  Hi, I have a custom table cell in an iPhone 3.x app to show basketball player data, including a picture. Here's my code from the table controller: UIImageView *theImage = (UIImageView *) [cell viewWithTag:0]; theImage.image = [manager getSmallImageForPlayer: data.number]; theImage.frame = CGRectMake(14, 0, 30, 44); theImage.clipsToBounds = YES; theImage.contentMode = UIViewContentModeScaleAspectFit; theImage.autoresizingMask = UIViewAutoresizingFlexibleHeight && UIViewAutoresizingFlexibleWidth; theImage.autoresizesSubviews = YES; Here's what it looks like in the iPhone SDK 3.0 simulator: Here's what it looks like in the iPhone SDK 3.1.3 simulator: So I have two problems: In both versions, the image view starts at position (0,0) in the table cell, even though I set the frame to start at (14,0). In the 3.0 simulator (and 3.0 device), the image is not shrunk down correctly, even though I set the image view content mode to "UIViewContentModeScaleAspectFit". But the same code works fine in the 3.1.3 simulator / device. Who can help me with either of these two problems?

  Read the article

• Restore DB - Error RESTORE HEADERONLY is terminating abnormally.

  - by Jordon

  I have taken backup of SQL Server 2008 DB on server, and download them to local environment. I am trying to restore that database and it is keep on giving me following error. An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ ADDITIONAL INFORMATION: The media family on device 'C:\go4sharepoint_1384_8481.bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.4053&EvtSrc=MSSQLServer&EvtID=3241&LinkId=20476 I have tried to create a temp DB on server and tried to restore the same backup file and that works. I have also tried no. of times downloading file from server to local pc using different options on Filezila (Auto, Binary) But its not working. After that I tried to execute following command on server. BACKUP DATABASE go4sharepoint_1384_8481 TO DISK=' C:\HostingSpaces\dbname_jun14_2010_new.bak' with FORMAT And it is giving me following error. Msg 3201, Level 16, State 1, Line 1 Cannot open backup device 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Backup\ C:\HostingSpaces\dbname_jun14_2010_new.bak'. Operating system error 123(The filename, directory name, or volume label syntax is incorrect.). Msg 3013, Level 16, State 1, Line 1 BACKUP DATABASE is terminating abnormally. After researching I found following 2 useful links 1) http://support.microsoft.com/kb/290787 2) http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/4d5836f6-be65-47a1-ad5d-c81caaf1044f But still I can't able to restore Database correctly. Any help would be much appreciated thanks.

  Read the article

• Multiple screen support in android?

  - by Yugesh

  In my application have six buttons,the screen size is 4.65" 720p(720X1280 : xhdpi),device take this resolution from normal layout folder.when i run it in device.it display like the image am shown below.how to set this six buttons fit to the screen according to layout width and height.I don't know how to do.Can any one know please help me to solve this problem. My XML coding <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/home_xml" android:layout_width="match_parent" android:layout_height="match_parent" android:background="#ffffff" > <Button android:id="@+id/btn_login" android:layout_width="101dp" android:layout_height="193dp" android:layout_alignParentLeft="true" android:layout_below="@+id/imageView1" android:layout_marginLeft="4dp" android:layout_marginTop="78dp" android:background="@drawable/login_button" /> <Button android:id="@+id/btn_order" android:layout_width="101dp" android:layout_height="wrap_content" android:layout_alignBottom="@+id/btn_login" android:layout_alignTop="@+id/btn_login" android:layout_marginLeft="3dp" android:layout_toRightOf="@+id/btn_login" android:background="@drawable/order_button" /> <Button android:id="@+id/btn_abtus" android:layout_width="101dp" android:layout_height="wrap_content" android:layout_alignBottom="@+id/btn_order" android:layout_alignTop="@+id/btn_order" android:layout_marginLeft="3dp" android:layout_toRightOf="@+id/btn_order" android:background="@drawable/aboutus_button" /> <Button android:id="@+id/btn_outlet" android:layout_width="100dp" android:layout_height="198dp" android:layout_alignLeft="@+id/btn_login" android:layout_alignRight="@+id/btn_login" android:layout_below="@+id/btn_login" android:background="@drawable/outlets_button" /> <Button android:id="@+id/btn_feedback" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignBottom="@+id/btn_outlet" android:layout_alignLeft="@+id/btn_order" android:layout_alignRight="@+id/btn_order" android:layout_alignTop="@+id/btn_outlet" android:background="@drawable/feedback_button" /> <Button android:id="@+id/btn_games" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignBottom="@+id/btn_feedback" android:layout_alignLeft="@+id/btn_abtus" android:layout_alignRight="@+id/btn_abtus" android:layout_alignTop="@+id/btn_feedback" android:background="@drawable/games_button" /> <RelativeLayout android:id="@+id/relativeLayout1" android:layout_width="match_parent" android:layout_height="44dp" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:background="#98110e" > </RelativeLayout>

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >