Search Results

Search found 10369 results on 415 pages for 'png 24'.

Page 197/415 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

  • Wireless connection by using command screen

    - by Amadeus
    I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

    Read the article

  • PBCS Hyperion Planning in the Cloud Implementation Workshop

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Oracle Planning and Budgeting Cloud Service (PBCS) opens up opportunities for organizations of all sizes to streamline planning and forecasting, accelerate deployment, and reduce costs. This one-day in-person workshop is delivered by Oracle Development (free to OPN member partners), and will cover the handoff from selling-to-implementing of PBCS. Although the basic building blocks are the same as with on-premises Planning, there is a paradigm shift when it comes to selling and implementing a Cloud Service solution. The value proposition behind Oracle Planning and Budgeting Cloud Service is all about the deployment model, how it’s sold and how it gets implemented – simplicity, fast adoption and flexible deployment, without sacrificing first-class functionality. To be successful, the entire cycle from sales to implementation should consistently support this value proposition to your clients. This training event is for OPN member partners whose business roles involve presales, implementation consulting, and support. This workshop briefly reviews the sales approach, as background, with emphasis on partner sales support. The main objective is to learn what is needed to successfully implement Oracle Planning and Budgeting Cloud Service once the sales hand off is made – how to leverage your current Hyperion Planning knowledge and use the features designed specifically to build out a Cloud Service solution. This Workshop is being offered at three locations for partners from all countries in EMEA: June 24, 2014: Kista, Sweden June 26, 2014: Reading, United Kingdom June 29-30, 2014 (split days): Dubaï, United Arab Emirates To get more information, to check pre-requisites, and to register, click here. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • IE issues with my Website (Help me fix my CSS)

    - by cam77
    I'm struggling geting my website to test fully positive in IE, the following problems keep arising, only in IE; My '#grey box' div displaying 200px to the left out of place, and it seems to move with the adjustment of the IE window size, does this in no other browsers, just IE. It creates this unnecessary horizontal scroll. I have the width set to pretty large, but have "overflow: hidden" and again, works fine across except for IE. On a few of my pages, the footer is somewhat cropped and out of place. My biggest concern is the particular page's CSS, pasted below. #container { width : 1265px; height : 920px; background-color : #addceb; overflow : hidden; padding : 0; } #logo { font-size : 38px; height : 167px; width : 427px; margin-left : 435px; padding-top : 20px; margin-bottom : -10px; margin-top: 10px; border : none; } #menunav { width : 100%; background-image : url(../imagesnew/menunav.png); background-repeat : repeat-x; height : 40px; text-align : center; font-size : 14px; font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; overflow : auto; } #menunav ul { list-style-type : none; background-image : url(); height : 40px; width : 800px; margin : auto; } #menunav ul a { background-image : url(); background-repeat : no-repeat; background-position : right; padding-right : 32px; padding-left : 15px; display : block; line-height : 30px; text-decoration : none; font-size : 14px; } #mainbox { position : relative; background-image : url(../premiumslideimgs/premiumbox.png); background-repeat : no-repeat; width : 900px; height : 800px; margin-left : 16%; top : 22px; padding-top : 5px; overflow : hidden; } #simplegallery1 { position : absolute; left : 50%; width : 800px; height : 800px; margin-top : 44px; margin-bottom: -44px; margin-bottom : 240px; margin-left : -397px; background-color : #a1bbfe; padding-top : 0; } #textbelowbox { position : absolute; width : 830px; height : 45px; margin-left : 209px; margin-bottom : 240px; margin-top : -240px; overflow : hidden; } #footer { background-image : url(../imagesnew/footerimg.png); background-repeat : no-repeat; background-position : right; height : 275px; margin-top : -285px; } a:hover { color : #addceb; } #right { float : right; margin-top : 3px; } #left { float : left; margin-left : 30px; } body { font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; background-color : #addceb; margin : 0; padding : 0; } #textabovebox { width : 920px; position : absolute; margin-left : 228px; margin-bottom : 80px; margin-top : 38px; z-index : 2000; font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; } a.submenu:hover { color : #333; font-weight : bolder; } #dialog { font-size : 12px; } #greybox { position : absolute; width : 275px; height : 465px; margin-left : 715px; margin-top : 80px; overflow : hidden; z-index : 2000; } ul { background-image : url(); height : 40px; width : 800px; margin : auto; } ul a { background-image : url(); background-repeat : no-repeat; background-position : right; padding-right : 32px; padding-left : 15px; display : block; line-height : 30px; text-decoration : none; font-size : 14px; } li { float : left; } a:link { color : #ffffff; text-decoration : none; } a:visited { color : #ffffff; text-decoration : none; } a:active { color : #ffffff; text-decoration : none; } a:hover { color : #addceb; } #right { float : right; margin-top : 3px; } #left { float : left; margin-left : 30px; } #text { float : left; margin-left : 30px; } body { font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; padding : 0; margin : 0; } body { background-color : #addceb; } a.submenu:link { color : #333333; } a.submenu:active { color : #333333; } a.submenu:visited { color : #333333; } a.submenu:hover { color : #333333; font-weight : bolder; } { margin: 0; padding: 0; } Please help if you can, thanks a lot.

    Read the article

  • How do you conquer the challenge of designing for large screen real-estate?

    - by Berin Loritsch
    This question is a bit more subjective, but I'm hoping to get some new perspective. I'm so used to designing for a certain screen size (typically 1024x768) that I find that size to not be a problem. Expanding the size to 1280x1024 doesn't buy you enough screen real estate to make an appreciable difference, but will give me a little more breathing room. Basically, I just expand my "grid size" and the same basic design for the slightly smaller screen still works. However, in the last couple of projects my clients were all using 1080p (1920x1080) screens and they wanted solutions to use as much of that real estate as possible. 1920 pixels across provides just under twice the width I am used to, and the wide screen makes some of my old go to design approaches not to work as well. The problem I'm running into is that when presented with so much space, I'm confronted with some major problems. How many columns should I use? The wide format lends itself to a 3 column split with a 2:1:1 split (i.e. the content column bigger than the other two). However, if I go with three columns what do I do with that extra column? How do I make efficient use of the screen real estate? There's a temptation to put everything on the screen at once, but too much information actually makes the application harder to use. White space is important to help make sense of complex information, but too much makes related concepts look too separate. I'm usually working with web applications that have complex data, and visualization and presentation is key to making sense of the raw data. When your user also has a large screen (at least 24"), some information is out of eye sight and you need to move the pointer a long distance. How do you make sure everything that's needed stays within the visual hot points? Simple sites like blogs actually do better when the width is constrained, which results in a lot of wasted real estate. I kind of wonder if having the text box and the text preview side by side would be a big benefit for the admin side of that type of screen? (1:1 two column split). For your answers, I know almost everything in design is "it depends". What I'm looking for is: General principles you use How your approach to design has changed I'm finding that i have to retrain myself how to work with this different format. Every bump in resolution I've worked through to date has been about 25%: 640 to 800 (25% increase), 800 to 1024 (28% increase), and 1024 to 1280 (25% increase). However, the jump from 1280 to 1920 is a good 50% increase in space--the equivalent from jumping from 640 straight to 1024. There was no commonly used middle size to help learn lessons more gradually.

    Read the article

  • jQuery facebook like popbox top navigation [migrated]

    - by Firz
    i just want to make facebook like popbox top navigation as below: http://i.stack.imgur.com/kQqJi.png the problem is, how to toggle another popbox named POPBOX2 with btn2, POPBOX3 with btn3 and so on. The LAYOUT of popBox2 and popBox3 same as popBox1, but the arrow of the popBox is under the btn. How to do this? i've copied my problem at this fiddle http://jsfiddle.net/FArIZzX77/dNVUj/ thanks for the answer :)

    Read the article

  • Can you work for the big (Google, Microsoft, Facebook etc.) without getting too much involved?

    - by Developer Art
    Having seen people talking about interviewing and working for the big companies, I keep wondering how much are you expected to actually get involved in there. 1) That's because I keep seeing folks from Google and Microsoft and others writing in forums, blogging, tweeting, speaking at conferences and seemingly doing this on the 24/7/365 basis from their office, apartment, hotel and even plane. Are you really expected to commit that much if you come to work for them? Do they want you to think about your work while you're eating, sleeping, taking a shower, making love and so on? Can you in fact "switch off" at five and go home forgetting everything? Perhaps you have a hobby, family life, kids, friends, personal projects anyone? Is it so that if you work for the big then you're expected not to have any life outside of the company? You can't develop own projects, have own clients and just have another life? 2) One other thing is the work contracts the big use. I've heard for instance that when you join Microsoft you need to provide a list of projects you're currently working on and after that anything new you'll come up with during your employment automatically belongs to the company. Are all of the big doing this? Can you deny signing a contract until such clause is removed or with the big it is "take it or leave it" because the legal department won't accept any change? Can you make them write the contract in that manner that they step away from anything you've developed in your private time? Of all the big I have only been at SAP during my internship. Lately while browsing through the old papers I've found my old contact which stipulated they owned everything I developed or invented during my employment, which I would never have signed these days. On a side note I don't think I would return to SAP since I remember most people there were clueless and provided the impression they were simply sitting out their years waiting for the retirement. But anyway, what do the other big put in their contracts? How far do you get involved when you go working for the big? Or perhaps fully committed with your body and soul? P.S. I'm not planning to join any of them I'm just curious.

    Read the article

  • I need beginner help on loading an image (2D). I have an error

    - by Seth Taddiken
    I keep getting a "NullReferenceExeption was unhandled" with "Object reference not set to an instance of an object." written under it. I have all of the images (png) correct with names and added to references. protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); backGround = Content.Load("Cracked"); player1.playerBlock = Content.Load("square"); player2.playerBlock = Content.Load("square2"); }

    Read the article

  • Fans running very fast on MacBook Pro 8.1 ubuntu 12.04

    - by Tomasz Kacprzak
    I installed Ubuntu 12.04 on Macbook Pro 8.1 and one of the first things I noticed was that the fans were starting to spin very fast every few minutes for 10-30 sec and then going back to normal. That was happening even without any processor load, when completely idle. The fans were usually spinning at 4000 RPM and made much noise. The computer was not getting hotter than usual. When running OSX Lion there was no noise at all, fans almost all the time at 2000 RPM. I spent some time on it and found out that Precise uses a deamon to control the temperature, called macfanctld. You can use /etc/macfanctld.conf to set the configuration. I found out that the high fan speed is not due to the fact that the temperature is getting hot, but because there are two sensors which indicate wrong numbers (you can check that using 'sensors' command ): TW0P: +129.0°C TCTD: +256.0°C TCFC: +0.0°C TMBS: +0.0°C or setting the macfanctld log level to 2: Speed: 4992, *AVG: 56.9C, TC0P: 50.2C, TG0P: 51.5C, Sensors: TB0T:34 TB1T:34 TB2T:33 TC0C:58 TC0D:56 TC0E:59 TC0F:60 TC0P:50 TC1C:58 TC2C:58 TC3C:58 TC4C:57 TCFC:0 TCGC:57 TCSA:53 TCTD:256 TG0D:52 TG0P:52 THSP:42 TM0S:64 TMBS:0 TP0P:54 TPCD:60 TW0P:129 Th1H:51 Th2H:48 Tm0P:40 Ts0P:32 Ts0S:43 Moreover, TCTD was randomly jumping from temperatures of 0 to 256, so this may be the reason for unjustified random fan speeds. macfanctld is taking an average of the sensors including the values above, so the actual AVG temp used to control the fans is wrong, usually biased up, hence high RPM and noise. The workaround solution is to use an option in the macfanctld.conf which allows to ignore the malfunctioning sensors: exclude: 13 16 21 24 After reboot the reported temperatures are usually normal and the fans are working at reasonable speeds. I tested the response of the fans to heavy processor load by asking MATLAB to invert 10000x10000 matrix and the AVG temperature jumped to 63deg, and the fan to max 6200 RPM and then got it back to normal temperature. So I think it is safe so far. There is a expired bug about the failing sensor readings: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/955538 which may be good to open again. My question would be: does anyone know what the failing sensors do and if there is any danger in excluding them? Maybe some better solution to this problem?

    Read the article

  • CSS Issue in IE Only [closed]

    - by kel
    I can't for the life of me figure out why specifying a image as a background for a link that it would look like this for IE and look the way it should for every other browser. The top image is IE and the bottom is every other browser. Look at the text, it is supposed to have a transparent PNG behind it and I set it to repeat. Here is the URL if you want to see the code: http://flesheatingzipper.com

    Read the article

  • How to cleanly add after-the-fact commits from the same feature into git tree

    - by Dennis
    I am one of two developers on a system. I make most of the commits at this time period. My current git workflow is as such: there is master branch only (no develop/release) I make a new branch when I want to do a feature, do lots of commits, and then when I'm done, I merge that branch back into master, and usually push it to remote. ...except, I am usually not done. I often come back to alter one thing or another and every time I think it is done, but it can be 3-4 commits before I am really done and move onto something else. Problem The problem I have now is that .. my feature branch tree is merged and pushed into master and remote master, and then I realize that I am not really done with that feature, as in I have finishing touches I want to add, where finishing touches may be cosmetic only, or may be significant, but they still belong to that one feature I just worked on. What I do now Currently, when I have extra after-the-fact commits like this, I solve this problem by rolling back my merge, and re-merging my feature branch into master with my new commits, and I do that so that git tree looks clean. One clean feature branch branched out of master and merged back into it. I then push --force my changes to origin, since my origin doesn't see much traffic at the moment, so I can almost count that things will be safe, or I can even talk to other dev if I have to coordinate. But I know it is not a good way to do this in general, as it rewrites what others may have already pulled, causing potential issues. And it did happen even with my dev, where git had to do an extra weird merge when our trees diverged. Other ways to solve this which I deem to be not so great Next best way is to just make those extra commits to the master branch directly, be it fast-forward merge, or not. It doesn't make the tree look as pretty as in my current way I'm solving this, but then it's not rewriting history. Yet another way is to wait. Maybe wait 24 hours and not push things to origin. That way I can rewrite things as I see fit. The con of this approach is time wasted waiting, when people may be waiting for a fix now. Yet another way is to make a "new" feature branch every time I realize I need to fix something extra. I may end up with things like feature-branch feature-branch-html-fix, feature-branch-checkbox-fix, and so on, kind of polluting the git tree somewhat. Is there a way to manage what I am trying to do without the drawbacks I described? I'm going for clean-looking history here, but maybe I need to drop this goal, if technically it is not a possibility.

    Read the article

  • Heroku augmente son support des technologies Java : couche de mise en cache, serveur Tomcat et plugins pour Eclipse et Atlassian

    Heroku augmente son support des technologies Java Couche de mise en cache, serveur Tomcat et plug-in pour Eclipse et Atlassian Salesforce.com, l'entreprise dirigeante de Heroku, a lancé mercredi une nouvelle variable de sa plateforme, dite "Entreprise for Java", qui supporte un ensemble de technologies et outils nécessaires au développement d'applications Java. [IMG]http://idelways.developpez.com/news/images/heroku-java.png[/IMG] La plateforme Cloud Heroku opère depuis 2007 et a été rachetée en 2010 par le spécialiste mondial des CRM Salesforce.com. Elle permet aux développeurs de construire, déployer et étendre des applications Web en mode PaaS,...

    Read the article

  • Best way to solve tile drawing in 2D side scroller?

    - by TheCompBoy
    What i still can't figure out is which would be the more sane way / easier and faster way to draw the map on the screen.. I mean i will use many tiles for my maps in my side scroller.. But problem is should i make the maps in whole images like one .png file for each map (Example) or should i draw the tiles by code like a for loop in c++.. Which way is most recomended or where can i read about which way is the best.

    Read the article

  • Sortie de la version 0.3 de Dvp.NET, la librairie .Net open source regroupant des fonctionnalités issues des membres du club Developpez.com

    La version 0.3 de la librairie Dvp.NET est disponible ! [IMG]http://dvp-net.developpez.com/images/logo-dvp.net.png[/IMG] En plus des nouvelles fonctionnalités, améliorations et corrections de bugs, la grosse nouveauté de cette version est le déploiement avec NuGet, qui va permettre de faciliter l'utilisation de Dvp.NET dans vos projets (si vous utilisez Visual Studio 2010). NuGet est un gestionnaire de packages : vous sélectionnez la librairie que vous souhaitez utiliser dans une liste, et NuGet se charge de tout

    Read the article

  • Google+ compte 400 millions d'utilisateurs dont 100 millions actifs par mois et directement sur le réseau social

    Google+ compte 400 millions d'utilisateurs dont 100 millions actifs Par mois et directement sur le réseau social Un an après le lancement de son réseau social phare en juin 2011, Google annonce qu'il compte aujourd'hui 400 millions d'utilisateurs, dont 100 millions de membres mensuellement et directement actifs sur Google+. [IMG]http://idelways.developpez.com/news/images/google-plus.png[/IMG] Vic Gundotra, vice-président senior ingénierie chez Google, déclare en marge d'une annonce « c'était il y a seulement un an que nous avons ouvert les inscriptions au publique, et nous n'aurions jamais imaginé qu'autant de gens nous rejoindraient en seulement 12 mo...

    Read the article

  • Fans running very fast on MacBook Pro 8.1

    - by Tomasz Kacprzak
    I installed Ubuntu 12.04 on Macbook Pro 8.1 and one of the first things I noticed was that the fans were starting to spin very fast every few minutes for 10-30 sec and then going back to normal. That was happening even without any processor load, when completely idle. The fans were usually spinning at 4000 RPM and made much noise. The computer was not getting hotter than usual. When running OSX Lion there was no noise at all, fans almost all the time at 2000 RPM. I spent some time on it and found out that Precise uses a deamon to control the temperature, called macfanctld. You can use /etc/macfanctld.conf to set the configuration. I found out that the high fan speed is not due to the fact that the temperature is getting hot, but because there are two sensors which indicate wrong numbers (you can check that using 'sensors' command ): TW0P: +129.0°C TCTD: +256.0°C TCFC: +0.0°C TMBS: +0.0°C or setting the macfanctld log level to 2: Speed: 4992, *AVG: 56.9C, TC0P: 50.2C, TG0P: 51.5C, Sensors: TB0T:34 TB1T:34 TB2T:33 TC0C:58 TC0D:56 TC0E:59 TC0F:60 TC0P:50 TC1C:58 TC2C:58 TC3C:58 TC4C:57 TCFC:0 TCGC:57 TCSA:53 TCTD:256 TG0D:52 TG0P:52 THSP:42 TM0S:64 TMBS:0 TP0P:54 TPCD:60 TW0P:129 Th1H:51 Th2H:48 Tm0P:40 Ts0P:32 Ts0S:43 Moreover, TCTD was randomly jumping from temperatures of 0 to 256, so this may be the reason for unjustified random fan speeds. macfanctld is taking an average of the sensors including the values above, so the actual AVG temp used to control the fans is wrong, usually biased up, hence high RPM and noise. The workaround solution is to use an option in the macfanctld.conf which allows to ignore the malfunctioning sensors: exclude: 13 16 21 24 After reboot the reported temperatures are usually normal and the fans are working at reasonable speeds. I tested the response of the fans to heavy processor load by asking MATLAB to invert 10000x10000 matrix and the AVG temperature jumped to 63deg, and the fan to max 6200 RPM and then got it back to normal temperature. So I think it is safe so far. There is a expired bug about the failing sensor readings: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/955538 which may be good to open again. My question would be: does anyone know what the failing sensors do and if there is any danger in excluding them? Maybe some better solution to this problem?

    Read the article

  • SophiaConf : 20 conférences gratuites ou peu onéreuses du 30 juin au 9 juillet en France à Sophia An

    Bonjour, Cela s'annonce comme l'un des évènements Gratuit phare de l'année en France, et il n'a pas lieu à Paris. [IMG]http://sophiaconf2010.fr/images/logo-top.png[/IMG] La SophiaConf se déroule sur une période de 10 jours et propose une série de conférences gratuites sur les sites de Polytech'Nice-Sophia, de l'INRIA et de l'Agora Einstein. Au programme :Gestion des identités et sécurisation des services web Intellectual Property Right Analysis

    Read the article

  • I need help with background interaction with foreground

    - by luther t
    So basicly my game design idea is to have a still back. In the foreground is a PNG format spirite that the user has controll over it is on the ground and the user jump over the oncoming from the right to left spirites. kinda like jumping over rock while running...So the problem...I don't where start. whether with the background or foreground...basicly i am a noob at this as a whole. I am sure if i explained well enough...

    Read the article

  • Chrome : 4 ans seulement et déjà 500 "Experiments", Google sort une WebApps pour e-musiciens faite avec Go et des technos webs

    Chrome : 4 ans seulement et déjà 500 Experiments Google fait une WebApps avec Go et des technos webs pour e-musiciens Chrome est certainement un des succès les plus remarquables de Google. Lorsque le navigateur a été lancé il y a à peine 4 ans, beaucoup se demandaient l'intérêt d'un tel projet. Et s'il allait réussir à se faire une place sur le marché entre Internet Explorer et Firefox. [IMG]http://ftp-developpez.com/gordon-fowler/History%20of%20Browsers.png[/IMG] "Evolution of The Web", une ligne chronologique en technos Web (Google...

    Read the article

  • Silverlight and WCF caching

    - by subodhnpushpak
    There are scenarios where Silverlight client calls WCF (or REST) service for data. Now, if the data is cached on the WCF layer, the calls can take considerable resources at the server if NOT cached. Keeping that in mind along with the fact that cache is an cross-cutting aspect, and therefore it should be as easy as possible to put Cache wherever required. The good thing about the solution is that it caches based on the inputs. The input can be basic type of any complex type. If input changes the data is fetched and then cached for further used. If same input is provided again, data id fetched from the cache. The cache logic itself is implemented as PostSharp aspect, and it is as easy as putting an attribute over service call to switch on cache. Notice how clean the code is:        [OperationContract]       [CacheOnArgs(typeof(int))] // based on actual value of cache        public string DoWork(int value)        {            return string.Format("You entered: {0} @ cached time {1}", value, System.DateTime.Now);        } The cache is implemented as POST Sharp as below 1: public override void OnInvocation(MethodInvocationEventArgs eventArgs) 2: { 3: try 4: { 5: object value = new object(); 6: object[] args = eventArgs.GetArgumentArray(); 7: if (args != null || args.Count() > 0) 8: { 9:   10: string key = string.Format("{0}_{1}", eventArgs.Method.Name, XMLUtility<object>.GetDataContractXml(args[0], null));// Compute the cache key (details omitted). 11:   12: 13: value = GetFromCache(key); 14: if (value == null) 15: { 16: eventArgs.Proceed(); 17: value = XMLUtility<object>.GetDataContractXml(eventArgs.ReturnValue, null); 18: value = eventArgs.ReturnValue; 19: AddToCache(key, value); 20: return; 21: } 22:   23:   24: Log(string.Format("Data returned from Cache {0}",value)); 25: eventArgs.ReturnValue = value; 26: } 27: } 28: catch (Exception ex) 29: { 30: //ApplicationLogger.LogException(ex.Message, Source.UtilityService); 31: } 32: } 33:   34: private object GetFromCache(string inputKey) { if (ServerConfig.CachingEnabled) { return WCFCache.Current[inputKey]; } return null; }private void AddToCache(string inputKey,object outputValue) 35: { 36: if (ServerConfig.CachingEnabled) 37: { 38: if (WCFCache.Current.CachedItemsNumber < ServerConfig.NumberOfCachedItems) 39: { 40: if (ServerConfig.SlidingExpirationTime <= 0 || ServerConfig.SlidingExpirationTime == int.MaxValue) 41: { 42: WCFCache.Current[inputKey] = outputValue; 43: } 44: else 45: { 46: WCFCache.Current.Insert(inputKey, outputValue, new TimeSpan(0, 0, ServerConfig.SlidingExpirationTime), true); 47:   48: // _bw.DoWork += bw_DoWork; 49: //string arg = string.Format("{0}|{1}", inputKey,outputValue); 50: //_bw.RunWorkerAsync(inputKey ); 51: } 52: } 53: } 54: }     The cache class can be extended to support Velocity / memcahe / Nache. the attribute can be used over REST services as well. Hope the above helps. Here is the code base for the same.   Please do provide your inputs / comments.

    Read the article

  • AdWords : Google ajoute une fonction pour convertir les annonces Flash en HTML5

    AdWords : Google ajoute une fonction pour convertir les annonces Flash en HTML5 Google a récemment intégré à AdWords, le système publicitaire de son moteur de recherche, une nouvelle fonctionnalité qui permet aux annonceurs de convertir les publicités Flash en HTML5. [IMG]http://ftp-developpez.com/gordon-fowler/Google%20Ad%20Words.png[/IMG] L'accès au Web se fait de nos jours à partir d'un nombre assez diversifié de dispositifs (PC, tablettes, smartphones, etc.). Cependant, les contenus publicitaires en Flash ne sont pas supportés par certains dispositifs, en particulier les tablettes, et le développement de nouvelles annonce...

    Read the article

  • Emploi : forte hausse du chômage dans l'IT en août, le secteur passe la barre des 34.000 demandeurs d'emplois

    Emploi : forte hausse du chômage dans l'IT En août, le secteur dépasse les 34.000 demandeurs d'emplois C'est une bien mauvaise surprise : il n'y a pas de pénuries dans l'emploi informatique. Au contraire. D'après les derniers chiffres du Ministère du travail, le chômage des professionnels de l'IT a progressé de 4% en août par rapport à juillet - +8.5% par rapport à août 2011 - pour dépasser les 34.000 demandeurs d'emplois. [IMG]http://ftp-developpez.com/gordon-fowler/Ch%C3%B4mage%20ITsmall.png[/IMG] Evolutiondu chômage dans l'IT...

    Read the article

  • Google ouvre la beta d'Analytics Mobile App et sort deux SDK pour le Google Analytics des applications Android et iOS

    Google ouvre la beta d'Analytics Mobile App Le Google Analytics pour applications Android et iOS En juin, Google avait lancé une beta privée de « Mobile Analytics App », son service permettant à la fois d'évaluer l'audience des applications mobiles et différents éléments (versions, etc.). Cette beta est désormais disponible en version publique. Première amélioration qui accompagne cette arrivée, les deux SDK pour Android et iOS ont été entièrement refaits et simplifiés pour générer des rapports en 5 minutes. [IMG]http://ftp-developpez.com/gordon-fowler/GoogleAppAnalytics.png[/IMG] Des rapports qui contiennent à présent beaucoup plus ...

    Read the article

  • post in popup div like wookmark

    - by sarhov
    I want understand how www.wookmark.com's popup done, I want to do same thing but can't I explained it in screenshot, http://rghost.net/private/40666533/9048bb08c7f7f530b743bb14f4e811d2/image.png How can I made like this, what I need? I have tried open the post in inline div which made absolute, but the similiar post are opened in main pag, and not in popup div, how can I that the post(picture) , the next and the similiar images are opening in popup div?

    Read the article

  • Microsoft lance TypeScript, un sur-ensemble de JavaScript, en réponse à Google Dart ?

    Microsoft lance TypeScript un sur-ensemble de JavaScript. [IMG]http://www.typescriptlang.org/content/images/logo_small.png[/IMG] Microsoft répond peut-être à l'apparition de Google Dart en annonçant la sortie d'un nouvel outil de type JavaScript. Effectivement, TypeScript est un sur-ensemble de JavaScript, les deux syntaxes se ressemblent fortement et tout code JavaScript est un programme TypeScript valide. Son auteur n'est autre que Anders Hejlsberg, concepteur du Framework .NET et chef de l'équipe C# à Microsoft.

    Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >