Search Results

Search found 5658 results on 227 pages for 'chris 45'.

Page 198/227 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• How to place SuperFetch cache on an SSD?

  - by Ian Boyd

  I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

  Read the article

• Ubuntu 9.10 X Stuck in restart loop - I think...

  - by widgisoft

  Trying out Ubuntu, installation went fine - upgraded to the proprietary nVidia drivers but on restart I get a login prompt and the screen is flashing really fast almost as if Xserver is trying to start and failing, I can type when the screen isn't in a "flash" as it were and it's so fast and random it's hard to even type a login name without it missing some characters - this makes typing a password (i.e. not being able to see which characters made it or not) very hard. I can log back into the live cd and alter my settings - but I can't even find out how to stop X stop starting on boot; Looks like they've moved everything around :-p I'd like to: Stop X from crashing and going insane (if it is actually Xserver) Know how to stop X from starting on bootup, Looks like interactive boot is also off by default now Update: A temporary work around seems to be enabling ssh and just connecting to the box over the network - ssh seems to work fine :-p Cheers, Chris

  Read the article

• Oracle Virtual Server OEL vm fails to start - kernel panic on cpu identify

  - by Towndrunk

  I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm. The log in the OVMM console shows the following; Update VM Status - Running Configure CPU Cap Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist. StackTrace: File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap run_cmd(args=['xm', File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd raise Exception('%s => %s' % (args, err)) The xend.log shows; [2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm [2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused. [2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3. [2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .> [2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3 [2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model [2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens.. Started domain 32_EM11g_OVM (id=4) Bootdata ok (command line is ro root=LABEL=/ ) Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000180800000 (usable)> No mptable found. Built 1 zonelists. Total pages: 1574912 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1600.008 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB disabled Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init) Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line) CPU: L2 Cache: 2048K (64 bytes/line) general protection fault: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1 RIP: e030:[ffffffff80271280] [ffffffff80271280] identify_cpu+0x210/0x494 RSP: e02b:ffffffff80643f70 EFLAGS: 00010212 RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005 RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000 R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80) Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000 0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00 0000000000000000 0000000000000000 Call Trace: [ffffffff802d09bb] kmem_cache_zalloc+0x62/0x80 [ffffffff8064cb00] start_kernel+0x210/0x224 [ffffffff8064c1e5] _sinittext+0x1e5/0x1eb Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef RIP [ffffffff80271280] identify_cpu+0x210/0x494 RSP ffffffff80643f70 0 Kernel panic - not syncing: Fatal exception clear as mud to me. are there any other logs that will help me? I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.

  Read the article

• PC runs very slowly for no apparent reason

  - by GalacticCowboy

  I have a Dell Latitude D820 that I've owned for about 2.5 years. It is a Core 2 Duo T7200 2.0GHz, with 2 GB of RAM, an 80 GB hard drive and an NVidia Quadro 120M video card. The computer was purchased in late November of 2006 with XP Pro, and included a free upgrade to Vista Business. (Vista was available on MSDN but not yet via retail, so the Vista Business upgrades weren't shipped until March of '07.) Since we had an MSDN subscription at the time, I installed Vista Ultimate on it pretty much as soon as I got it. It ran happily until sometime in the spring of 2007 when Media Center (which I had never used except to watch DVDs) started throwing some kind of bizarre SQL (CE?) error. This error would pop up at random times just while using the computer. Furthermore, Media Center would no longer start. I never identified the cause of this error. I had the Vista Business upgrade by this time, so I nuked the machine, installed XP and all the drivers, and then the Vista Business upgrade. Again, it ran happily for a few months and then started behaving badly once again. Vista Business doesn't have Media Center, so this exhibited completely unrelated symptoms. For no apparent reason and at fairly random times, the machine would suddenly appear to freeze up or run very slowly. For example, launching a new application window (any app) might take 30-45 seconds to paint fully. However, Task Manager showed very low CPU load, memory, etc. I tried all the normal stuff (chkdsk, defrag, etc.) and ran several diagnostic programs to try to identify any problems, but none found anything. It eventually reached the point that the computer was all but unusable, so I nuked it again and installed XP. This time I decided to stick with XP instead of going to Vista. However, within the past couple of months it has started to exhibit the same symptoms in XP that I used to see in Vista. The computer is still under Dell warranty until December, but so far they aren't any help unless I can identify a specific problem. A friend (partner in a now-dead business) has an identical machine that was purchased at the same time. His machine exhibits none of these symptoms, which leads me to believe it is a hardware issue, but I can't figure out how to identify it. Any ideas? Utilities? Seen something similar? At this point I can't even identify any pattern to the behavior, but would be willing to run a "stress test"-style app for as long as a couple days if I had any hope that it would find something. EDIT July 17 I'm testing jerryjvl's answer regarding the video card, though I'm not sure it fully explains the symptoms yet. This morning I ran a video stress test. The test itself ran fine, but immediately afterward the PC started acting up again. I left ProcExp open and various system processes were consuming 50-60% of the CPU but with no apparent reason. For example, "services.exe" was eating about 40%, but the sum of its child processes wasn't higher than about 5%. I left it alone for several minutes to settle down, and then it was fine again. I used the "video card stability test" from firestone-group.com. Its output isn't very detailed, but it at least exercises the hardware pretty hard. EDIT July 22 Thanks for your excellent suggestions. Here is an update on what I have tried so far. Ran memtest86, SeaTools (Seagate), Hitachi drive fitness test, video card stability test (mentioned above). The video card test was the only one that seemed to produce any results, though it didn't occur during the actual test. I defragged the drive (again...) with JkDefrag I dropped the video card

  Read the article

• Bugzilla : No SASL mechanism found

  - by niteshsinha

  I am using Bugzilla on windows 7. I am using the unofficial Bugzilla installer. I followed the steps accordingly and gave valid credentials wherever required. I open Bugzilla and try to create a new account , but i get the following error. Software error: No SASL mechanism found at C:/Program Files/Bugzilla/perl/perl/site/lib/Authen/SASL.pm line 77 at C:/Program Files/Bugzilla/perl/perl/lib/Net/SMTP.pm line 143 i ran checksetup.pl and found that Authen::SASL and SMTP both are available on my machine. The output of checksetup.pl is as follows. * This is Bugzilla 3.6.3 on perl 5.10.1 * Running on Win7 Build 7600 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.49 Checking for Digest-SHA (any) ok: found v5.48 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.53 Checking for DateTime-TimeZone (v0.79) ok: found v1.10 Checking for DBI (v1.41) ok: found v1.609 Checking for Template-Toolkit (v2.22) ok: found v2.22 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.861) ok: found v1.903 Checking for Email-MIME-Encodings (v1.313) ok: found v1.313 Checking for Email-MIME-Modifier (v1.442) ok: found v1.903 Checking for URI (any) ok: found v1.52 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.16.1 Checking for DBD-mysql (v4.00) ok: found v4.012 Checking for DBD-Oracle (v1.19) not found The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.44 Checking for Chart (v2.1) ok: found v2.4.1 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for XML-Twig (any) ok: found v3.34 Checking for MIME-tools (v5.406) ok: found v5.427 Checking for libwww-perl (any) ok: found v5.834 Checking for PatchReader (v0.9.4) ok: found v0.9.5 Checking for perl-ldap (any) ok: found v0.39 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.17 Checking for SOAP-Lite (v0.710.06) ok: found v0.710.10 Checking for JSON-RPC (any) ok: found v0.95 Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.40) ok: found v3.64 Checking for HTML-Scrubber (any) ok: found v0.08 Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * *********************************************************************** * Note For Windows Users * *********************************************************************** * In order to install the modules listed below, you first have to run * * the following command as an Administrator: * * * * ppm repo add theory58S http://cpan.uwinnipeg.ca/PPMPackages/10xx/ * * * Then you have to do (also as an Administrator): * * * * ppm repo up theory58S * * * * Do that last command over and over until you see "theory58S" at the * * top of the displayed list. * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Reading ./localconfig... Checking for DBD-mysql (v4.00) ok: found v4.012 Checking for MySQL (v4.1.2) ok: found v5.1.44-community-log Removing existing compiled templates... Precompiling templates...done. Now that you have installed Bugzilla, you should visit the 'Parameters' page (linked in the footer of the Administrator account) to ensure it is set up as you wish - this includes setting the 'urlbase' option to the correct URL. Press any key to continue . . . Please tell me what should i do. Please note: i am running behind a corporate proxy , SSL/TLS is not used internally but i am giving the smtpUser and smtpPass also.

  Read the article

• Fast Bookmarking In Firefox

  - by Kije

  Making bookmarks in Firefox has become tedious. Can any one point me to a bookmarking extension that works as follows... Decide you want to bookmark a page Left click your way to the target bookmark folder Right the target bookmark folder to get a "Bookmark this page here" option. (It is this "Bookmark this page here" add on that I am looking for) (Edit the book mark title tags etc) Click done Currently you have to: Decide you want to bookmark a page Click on the bookmarks menu pulldown Click on "bookmark this page" Click on the "folder" pulldown Click on "Bookmarks tool bar" or "Bookmarks menu" Left click your way to the target bookmark folder (in a teeny window that that doesn't move the focus as you expand folders) (Edit the book mark title tags etc) Click "Done" That would be four (or five) steps to replace the seven (or eight) steps to make a bookmark in an existing folder. @Chris I assume you are referring me to "Read It Later" http://www.ideashower.com/ideas/launched/read-it-later/ I'll take a look.

  Read the article

• CPU Utilization LAMP stack

  - by Max

  We've got an ec2 m2.4xlarge running Magento (centos 5.6, httpd 2.2, php 5.2.17 with eaccelerator 0.9.5.3, mysql 5.1.52). Right now we're getting a large traffic spike, and our top looks like this: top - 09:41:29 up 31 days, 1:12, 1 user, load average: 120.01, 129.03, 113.23 Tasks: 1190 total, 18 running, 1172 sleeping, 0 stopped, 0 zombie Cpu(s): 97.3%us, 1.8%sy, 0.0%ni, 0.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.4%st Mem: 71687720k total, 36898928k used, 34788792k free, 49692k buffers Swap: 880737784k total, 0k used, 880737784k free, 1586524k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2433 mysql 15 0 23.6g 4.5g 7112 S 564.7 6.6 33607:34 mysqld 24046 apache 16 0 411m 65m 28m S 26.4 0.1 0:09.05 httpd 24360 apache 15 0 410m 60m 25m S 26.4 0.1 0:03.65 httpd 24993 apache 16 0 410m 57m 21m S 26.1 0.1 0:01.41 httpd 24838 apache 16 0 428m 74m 20m S 24.8 0.1 0:02.37 httpd 24359 apache 16 0 411m 62m 26m R 22.3 0.1 0:08.12 httpd 23850 apache 15 0 411m 64m 27m S 16.8 0.1 0:14.54 httpd 25229 apache 16 0 404m 46m 17m R 10.2 0.1 0:00.71 httpd 14594 apache 15 0 404m 63m 34m S 8.4 0.1 1:10.26 httpd 24955 apache 16 0 404m 50m 21m R 8.4 0.1 0:01.66 httpd 24313 apache 16 0 399m 46m 22m R 8.1 0.1 0:02.30 httpd 25119 apache 16 0 411m 59m 23m S 6.8 0.1 0:01.45 httpd Questions: Would giving msyqld more memory help it cache queries and react faster? If so, how? Other than splitting mysql and php to separate servers (which we're about to do) is there anything else we could/should be doing? Thanks! UPDATE: Here's our my.cnf along with the output of mysqltuner. It looks like a cache problem. Thanks again! # cat /etc/my.cnf [client] port = **** socket = /var/lib/mysql/mysql.sock [mysqld] datadir=/mnt/persistent/mysql port=**** socket=/var/lib/mysql/mysql.sock key_buffer = 512M max_allowed_packet = 64M table_cache = 1024 sort_buffer_size = 8M read_buffer_size = 4M read_rnd_buffer_size = 2M myisam_sort_buffer_size = 64M thread_cache_size = 128M tmp_table_size = 128M join_buffer_size = 1M query_cache_limit = 2M query_cache_size= 64M query_cache_type = 1 max_connections = 1000 thread_stack = 128K thread_concurrency = 48 log-bin=mysql-bin server-id = 1 wait_timeout = 300 innodb_data_home_dir = /mnt/persistent/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size = 20G innodb_additional_mem_pool_size = 20M innodb_log_file_size = 64M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 innodb_thread_concurrency = 48 ft_min_word_len=3 [myisamchk] ft_min_word_len=3 key_buffer = 128M sort_buffer_size = 128M read_buffer = 2M write_buffer = 2M # ./mysqltuner.pl >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.52-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB +Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 2G (Tables: 26) [--] Data in InnoDB tables: 749M (Tables: 250) [!!] Total fragmented tables: 262 -------- Security Recommendations ------------------------------------------- -------- Performance Metrics ------------------------------------------------- [--] Up for: 31d 2h 30m 38s (680M q [253.371 qps], 2M conn, TX: 4825B, RX: 236B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 20.6G global + 15.1M per thread (1000 max threads) [OK] Maximum possible memory usage: 35.4G (51% of installed RAM) [OK] Slow queries: 0% (35K/680M) [OK] Highest usage of available connections: 53% (537/1000) [OK] Key buffer size / total MyISAM indexes: 512.0M/457.2M [OK] Key buffer hit rate: 100.0% (9B cached / 264K reads) [OK] Query cache efficiency: 42.3% (260M cached / 615M selects) [!!] Query cache prunes per day: 4384652 [OK] Sorts requiring temporary tables: 0% (1K temp sorts / 38M sorts) [!!] Joins performed without indexes: 100404 [OK] Temporary tables created on disk: 17% (7M on disk / 45M total) [OK] Thread cache hit rate: 99% (537 created / 2M connections) [!!] Table cache hit rate: 0% (1K open / 946K opened) [OK] Open file limit used: 9% (453/5K) [OK] Table locks acquired immediately: 99% (758M immediate / 758M locks) [OK] InnoDB data size / buffer pool: 749.3M/20.0G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Variables to adjust: query_cache_size (> 64M) join_buffer_size (> 1.0M, or always use indexes with joins) table_cache (> 1024)

  Read the article

• An error occured synchronizing windows with time.windows.com

  - by Killrawr

  Okay so I've tried stopping/registering the win32tm service on this Windows Server 2008 Enterprise Computer. C:\Users\Administrator>net stop w32time The Windows Time service is stopping. The Windows Time service was stopped successfully. C:\Users\Administrator>w32tm /unregister The following error occurred: Access is denied. (0x80070005) C:\Users\Administrator>w32tm /unregister W32Time successfully unregistered. C:\Users\Administrator>w32tm /register W32Time successfully registered. C:\Users\Administrator>net start w32time The Windows Time service is starting. The Windows Time service was started successfully. (Source : http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/9bdfc2cc-4775-4435-8868-57d214e1e3ba/) And I get this error from the Date and Time, Internet Time tab (After also following the steps here). I've even tried the Atomic Time Clock Worldtimeserver and I get the error The following error occurred: The specified module could not be found. (0x8007007E). I've also disabled the Windows Firewall, that might of been blocking the synchronization. I've done a file scan with sfc /scannow that came back with no errors. C:\Users\Administrator>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations. C:\Users\Administrator> But I'm not having much luck. Is there anyway lo possibly solve this? or is the time.windows.com servers unsupported? because the software is from 2008? (I really don't know :/), My ping result to time.windows.com C:\Users\Administrator>ping time.windows.com Pinging time.microsoft.akadns.net [65.55.21.22] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 65.55.21.22: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), And tracert result C:\Users\Administratortracert time.windows.com Tracing route to time.microsoft.akadns.net [65.55.21.24] over a maximum of 30 hops: 1 1 ms <1 ms <1 ms 192.168.1.1 2 32 ms 31 ms 32 ms be2-100.bras1wtc.wlg.vf.net.nz [203.109.129.113] 3 31 ms 32 ms 31 ms be5-100.ppnzwtc01.wlg.vf.net.nz.129.109.203.in-a ddr.arpa [203.109.129.114] 4 31 ms 31 ms 31 ms gi0-2-0-3.ppnzwtc01.wlg.vf.net.nz.180.109.203.in -addr.arpa [203.109.180.210] 5 31 ms 31 ms 30 ms gi0-2-0-3.ppnzwtc02.wlg.vf.net.nz [203.109.180.2 09] 6 167 ms 166 ms 166 ms ip-141.199.31.114.VOCUS.net.au [114.31.199.141] 7 175 ms 175 ms 175 ms microsoft.com.any2ix.coresite.com [206.223.143.1 43] 8 177 ms 180 ms 176 ms xe-7-0-2-0.by2-96c-1a.ntwk.msn.net [207.46.42.17 6] 9 205 ms 205 ms 204 ms xe-10-0-2-0.co1-96c-1b.ntwk.msn.net [207.46.45.3 1] 10 * * * Request timed out. 11 * * * Request timed out. 12 * * * Request timed out. 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 ^C And nslookup C:\Users\Administrator>nslookup time.windows.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: time.microsoft.akadns.net Address: 65.55.21.22 Aliases: time.windows.com

  Read the article

• Proliant server will not accept new hard disks in RAID 1+0?

  - by Leigh

  I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

  Read the article

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• VirtualBox "Bridged Adapter" when host NIC is turned off

  - by chris_l

  Hi, I'm running Linux (Debian Etch) in a VirtualBox VM on my MacBook. I usually ssh from my Mac terminal to the guest machine. I also want to access the internet from my guest, so I set up my host's WLAN card (en1) as a bridged adapter for eth0 on the client. This works fine, but when I turn off the WLAN card (e.g. to reduce battery consumption), I'd still like to ssh from my host to the guest. This fails of course, because en1 loses its IP address. Is a bridged adapter the best option for what I want to do? How can I make it work? (A simple "ifconfig en1 add 10.0.0.4" didn't do the trick...) Thanks Chris

  Read the article

• Performance problems on RDC to our Terminal-Server Win2008 R2

  - by user40021

  Hello, we have a new win2008-R2 (2x Xeon X5570, 32GB RAM). There I have installed the terminal-server roles, thats all OK. Currently 5 users are working at this server, but all get a very low performance in their remote-desktop session. Sometime it takes 1-2 seconds till the keyboard-inputs will be performed and shown. At the clients I run RDP v 6.1 We have also an older TS-server (based on Win2003 with an Opteron-CPU), there are working about 20 users at the same time. There I do not have the troubles with the inputs at the remote-desktop sessions. Both servers are connected to the same gigabit-switch. Any ideas what could cause the troubles at the Win2008 R2? Many thanks in advance. Regards Chris

  Read the article

• Website loading until initial script finishes

  - by wardy277

  Hi, i have a highly used server (running plesk). I have some long scripts that take a while to process (huge mysql database). I have found then in 1 browser, i run the script and while it is loading i cannot view any other parts of the site until the script finishes, it seems that all the requests go off, but they don't get served until the initial script finishes. i thought this may be a server wide issue, but it is not. If i use another computer i can view the site fine, even on the same computer with a different browser i can navigate fine, while the script still loads. I think it much limit the number of requests per session. Is this correct? is there any way to configure this to allow for 2-3 other requests per session? It is really bad that when i am on the phone to a client, i have just run a long report, but cannot use the site or follow what they are saying until the page has loaded? Chris

  Read the article

• Excessive denied requests for port 58322 in syslog

  - by Nathan C.

  My iptables is setup to block all unneeded ports as it should but I'm checking my syslog due to these random but all-to-frequent apache2 crashes and I noticed a lot of requests such as this. In all the archived syslogs that I have these are present from different IP addresses. There is a similar question with an accepted here: What service uses UDP port 60059? Jun 4 06:49:27 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=218.7.74.50 DST=MY.SERVER.IP.HERE LEN=129 TOS=0x00 PREC=0x00 TTL=115 ID=27636 PROTO=UDP SPT=9520 DPT=58322 LEN=109 Jun 4 06:49:31 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=95.160.226.177 DST=MY.SERVER.IP.HERE LEN=131 TOS=0x00 PREC=0x00 TTL=116 ID=31468 PROTO=UDP SPT=47642 DPT=58322 LEN=111 Jun 4 06:49:54 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=78.137.36.10 DST=MY.SERVER.IP.HERE LEN=131 TOS=0x00 PREC=0x00 TTL=118 ID=21872 PROTO=UDP SPT=57872 DPT=58322 LEN=111 Jun 4 06:50:14 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=111.253.217.11 DST=MY.SERVER.IP.HERE LEN=131 TOS=0x00 PREC=0x00 TTL=116 ID=28882 PROTO=UDP SPT=51826 DPT=58322 LEN=111 Jun 4 06:51:02 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=189.45.114.173 DST=MY.SERVER.IP.HERE LEN=131 TOS=0x16 PREC=0x00 TTL=113 ID=19985 PROTO=UDP SPT=41087 DPT=58322 LEN=111 Jun 4 06:51:09 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=87.89.202.28 DST=MY.SERVER.IP.HERE LEN=131 TOS=0x00 PREC=0x00 TTL=116 ID=7874 PROTO=UDP SPT=17524 DPT=58322 LEN=111 Jun 4 06:51:20 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=24.44.124.35 DST=MY.SERVER.IP.HERE LEN=131 TOS=0x00 PREC=0x00 TTL=118 ID=12978 PROTO=UDP SPT=45596 DPT=58322 LEN=111 Jun 4 06:51:22 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=81.174.48.236 DST=MY.SERVER.IP.HERE LEN=93 TOS=0x00 PREC=0x00 TTL=48 ID=0 DF PROTO=UDP SPT=21352 DPT=58322 LEN=73 Jun 4 06:51:23 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=124.107.61.84 DST=MY.SERVER.IP.HERE LEN=131 TOS=0x00 PREC=0x00 TTL=114 ID=13038 PROTO=UDP SPT=14357 DPT=58322 LEN=111 Jun 4 06:51:30 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=88.8.23.200 DST=MY.SERVER.IP.HERE LEN=123 TOS=0x00 PREC=0x00 TTL=117 ID=21062 PROTO=UDP SPT=4291 DPT=58322 LEN=103 Jun 4 06:51:54 HOSTNAME kernel: iptables denied: IN=eth0 OUT= MAC=fe:fd:ad:ff:dd:95:c8:4c:75:f5:d6:3f:08:00 SRC=80.202.244.234 DST=MY.SERVER.IP.HERE LEN=129 TOS=0x00 PREC=0x00 TTL=114 ID=339 PROTO=UDP SPT=14020 DPT=58322 LEN=109 I'm not overly experienced with server configuration and debugging, so I only just installed logcheck after reading that previous question. I guess my question is what steps should I take after reading this log info to 1) further protect myself, 2) understand if this could be causing any other problems with my VPS, and 3) use this data to help others?

  Read the article

• Do hard drive enclosures fail/is it the HDD or enclosure?

  - by x0a

  I'm having a whole host of problems with an external hard drive that was working just fine a couple of hours ago. I've had this problem before once, and that was about 3 months ago, here's what I documented: So a couple of hours ago I turned off all my computers and shut off the power to all my devices in my room, then went and turned the power off at the main switch so I could change an outlet. A couple hours later, after I've already slowly turned everything back on, I go to my xbox to try and watch a movie and it can't seem to list any of the movies I've got. So I go to my desktop to find that my external hard drive isn't there.. even though it's on and connected. It's also stationary and hidden behind something so there's not a whole lot of tampering/physical wear to that external. I plug it into my laptop to try and see what's going on. It starts making this endless loud screeching noise. None of that clicking that's usually associated with hd damage. It's not listed in my computers, and it shows up in Disk Management as "uninitialized" asking me to choose between two different partition types. After carefully disconnecting it and connecting it back, it asks me to format it, which I cancel. I start googling about my issue, starting to accept the situation, torn as hell and helpless and just about ready to toss the thing. Suddenly the screeching stops, after almost 45 minutes of it going, and Disk Management lists the drive as "Online" and "Healthy". Explorer pops up with all my files! I'm still being really careful with it and weary and treating it as though it's in fragile shape. I've downloaded some S.M.A.R.T. software to read the values and everything is listed as "OK" . No reallocated sectors, no read errors, no seek errors. I also ran a quick self-test, which completed without error. Everything seems fine. It looks to be a perfectly healthy external hard drive. So what the hell was that about? Was it doing some sort of maintenance or self-test? How am I supposed to tell the difference? I would've undoubtedly killed the drive for sure if had it gone on a bit longer. I've got the same problem now, with one exception: it doesn't magically reappear after the screeching stops. Occasionally I manage to get some S.M.A.R.T. diagnostics information, which basically reads everything as fine. The only problem is that my HD isn't initializing (so I can't access anything in it). I'm able to successfully run a quick smart test but not an extended one (I've only tried it once but got conflicting indications as to whether it was actually making any progress or not (was stuck on Random read test). So, final question (if all else fails): Could the hard drive enclosure be failing rather than the HDD? Is this a likely possibility at all? How would I know?

  Read the article

• Where is my VMware-ws FreeNAS CIFS(ZFS) bottle-neck?

  - by maka

  Background: I'm building a quiet HTPC + NAS that is also supposed to be used for general computer usage. I'm so far generally happy with things, it was just that I was expecting a little better IO performance. I have no clue if my expectations are unreal. The NAS is there as a general purpose file storage and as a media server for XBMC and other devices. ZFS is a requirement. Question: Where is my bottle-neck, and is there anything I can do config wise, to improve my performance? I'm thinking VM-disk settings could be something but I really have no idea where to go since I'm neither experienced with FreeNAS nor VMware-WS. Tests: When I'm on the host OS and copy files (from the SSD) to the CIFS share, I get around 30 Mbytes/sec read and write. When I'm on my laptop laptop, wired to the network, I get about the same specs. The test I've done are with a 16 GB ISO, and with about 200 MB of RARs and I've tried avoiding the RAM-cache by reading different files than the ones I'm writing ( 10 GB). It feels like having less CPU cores is a lot more efficient, since the resource manager in Windows reports less CPU-usage. With 4 cores in VMware, CPU usage was 50-80%, with 1 core it was 25-60%. EDIT: HD ActiveTime was quite high on SSD so I moved the page file, disabled hibernate and enabled Win DiskCache both on SSD and RAID. This resulted in no real performance difference for one file, but if i transferred 2 files the total speed went up to 50 Mbytes/s vs ~40. The ActiveTime avg also went down a lot (to ~20%) but has now higher bursts. DiskIO is on ~ 30-35 Mbytes/s avgs, with ~100Mb bursts. Network is on 200-250Mbits/s with ~45 active TCP connections. Hardware Asus F2A85-M Pro A10-5700 16GB DDR3 1600 OCZ Vertex 2 128GB SSD 2x Generic 1tb 7200 RPM drives as RAID0 (in win7) Intel Gigabit Desktop CT Software Host OS: Win7 (SSD) VMware Worksation 9 (SSD) FreeNAS 8.3 VM (20GB VDisk on SSD) CPU: I've tried 1, 2 and 4 cores. Virtualisation engine, Preferred mode: Automatic 10,24Gb ram 50Gb SCSI VDisk on the RAID0, VDisk is formatted as ZFS and exposed through CIFS through FreeNAS. NIC Bridge, Replicate physical network state Below are two typical process print-outs while I'm transfering one file to the CIFS share. last pid: 2707; load averages: 0.60, 0.43, 0.24 up 0+00:07:05 00:34:26 32 processes: 2 running, 30 sleeping Mem: 101M Active, 53M Inact, 1620M Wired, 2188K Cache, 149M Buf, 8117M Free Swap: 4096M Total, 4096M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 2640 root 1 102 0 50164K 10364K RUN 0:25 25.98% smbd 1897 root 6 44 0 168M 74808K uwait 0:02 0.00% python last pid: 2746; load averages: 0.93, 0.60, 0.33 up 0+00:08:53 00:36:14 33 processes: 2 running, 31 sleeping Mem: 101M Active, 53M Inact, 4722M Wired, 2188K Cache, 152M Buf, 5015M Free Swap: 4096M Total, 4096M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 2640 root 1 76 0 50164K 10364K RUN 0:52 16.99% smbd 1897 root 6 44 0 168M 74816K uwait 0:02 0.00% python I'm sorry if my question isn't phrased right, I'm really bad at these kind of things, and it is the first time I post here at SU. I also appreciate any other suggestions to something, I could have missed.

  Read the article

• Squid - Logging to MySQL without empty rows/skipped records?

  - by Lee Ward

  I'm trying to figure out how to make Squid proxy log to MySQL. I know ACL order is pretty important but I'm not sure if I understand exactly what ACLs are or do, it's difficult to explain, but hopefully you'll see where I'm going with this as you read! I have created the lines to make Squid interact with a helper in squid.conf as follows: external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log The external ACL helper (mysql_lg.php) is a PHP script and is as follows: error_reporting(0); if (! defined(STDIN)) { define("STDIN", fopen("php://stdin", "r")); } $res = mysql_connect('localhost', 'squid', 'testsquidpw'); $dbres = mysql_select_db('squid', $res); while (!feof(STDIN)) { $line = trim(fgets(STDIN)); $fields = explode(' ', $line); $user = rawurldecode($fields[0]); $cli_ip = rawurldecode($fields[1]); $protocol = rawurldecode($fields[2]); $uri = rawurldecode($fields[3]); $q = "INSERT INTO logs (id, user, cli_ip, protocol, url) VALUES ('', '".$user."', '".$cli_ip."', '".$protocol."', '".$uri."');"; mysql_query($q) or die (mysql_error()); if ($fault) { fwrite(STDOUT, "ERR\n"); }; fwrite(STDOUT, "OK\n"); } The configuration I have right now looks like this: ## Authentication Handler auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 30 auth_param negotiate program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-basic auth_param negotiate children 5 # Allow squid to update log external_acl_type mysql_log %LOGIN %SRC %PROTO %URI php /etc/squid3/custom/mysql_lg.php acl ex_log external mysql_log http_access allow ex_log acl localnet src 172.16.45.0/24 acl AuthorizedUsers proxy_auth REQUIRED acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl CONNECT method CONNECT acl blockeddomain url_regex "/etc/squid3/bl.acl" http_access deny blockeddomain deny_info ERR_BAD_GENERAL blockeddomain # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # Allow the internal network access to this proxy http_access allow localnet # Allow authorized users access to this proxy http_access allow AuthorizedUsers # FINAL RULE - Deny all other access to this proxy http_access deny all From testing, the closer to the bottom I place the logging lines the less it logs. Oftentimes, it even places empty rows in to the MySQL table. The file-based logs in /var/log/squid3/access.log are correct but many of the rows in the access logs are missing from the MySQL logs. I can't help but think it's down to the order I'm putting lines in because I want to log everything to MySQL, unauthenticated requests, blocked requests, which category blocked a specific request. The reason I want this in MySQL is because I'm trying to have everything managed via a custom web-based frontend and want to avoid using any shell commands and access to system log files if I can help it. The end result is to make it as easy as possible to maintain without keeping staff waiting on the phone whilst I add a new rule and reload the server! Hopefully someone can help me out here because this is very much a learning experience for me and I'm pretty stumped. Many thanks in advance for any help!

  Read the article

• Highly robust and scalable search server needed for managing and analyze files

  - by ChrisBenyamin

  Hi everybody, I am looking for a professional search server system with functionality, like e.g. solr http://lucene.apache.org/solr/ holds. Place of action should be a centralized location, whereon many hosts would request data. Furthermore the system should be extensible for implementing statistical procedures. (e.g. a kind of heatmap (or common diagrams) of a (or more) file(s) (which has a guid), that is spread on different hosts.) This software doesn't have to be opensource. thanks. chris

  Read the article

• 1600+ 'postfix-queue' processes - OK to have this many?

  - by atomicguava

  I have a Plesk 9.5.4 CentOS server running Postfix. I had been having massive problems with the mailq being full of 'double-bounce' email messages containing errors relating to 'Queue File Write Error', but I believe these are now fixed thanks to this thread. My new problem is that when I run top, I can see lots of processes called 'postfix-queue' and have fairly high load: top - 13:59:44 up 6 days, 21:14, 1 user, load average: 2.33, 2.19, 1.96 Tasks: 1743 total, 1 running, 1742 sleeping, 0 stopped, 0 zombie Cpu(s): 5.1%us, 8.8%sy, 0.0%ni, 85.3%id, 0.8%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3145728k total, 1950640k used, 1195088k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1324 apache 16 0 344m 33m 5664 S 21.7 1.1 0:03.17 httpd 32443 apache 15 0 350m 36m 6864 S 14.4 1.2 0:13.83 httpd 1678 root 15 0 13948 2568 952 R 2.0 0.1 0:00.37 top 1890 mysql 15 0 689m 318m 7600 S 1.0 10.4 219:45.23 mysqld 1394 apache 15 0 352m 41m 5972 S 0.7 1.3 0:03.91 httpd 1369 apache 15 0 344m 33m 5444 S 0.3 1.1 0:02.03 httpd 1592 apache 15 0 349m 37m 5912 S 0.3 1.2 0:02.52 httpd 1633 apache 15 0 336m 20m 1828 S 0.3 0.7 0:00.01 httpd 1952 root 19 0 335m 28m 10m S 0.3 0.9 1:35.41 httpd 1 root 15 0 10304 732 612 S 0.0 0.0 0:04.41 init 1034 mhandler 15 0 11520 1160 884 S 0.0 0.0 0:00.00 postfix-queue 1036 mhandler 15 0 11516 1120 860 S 0.0 0.0 0:00.00 postfix-queue 1041 mhandler 17 0 11516 1156 884 S 0.0 0.0 0:00.00 postfix-queue 1043 mhandler 15 0 11512 1116 860 S 0.0 0.0 0:00.00 postfix-queue 1063 mhandler 16 0 11516 1160 884 S 0.0 0.0 0:00.00 postfix-queue 1068 mhandler 15 0 11516 1128 860 S 0.0 0.0 0:00.00 postfix-queue 1071 mhandler 17 0 11512 1152 884 S 0.0 0.0 0:00.00 postfix-queue 1072 mhandler 15 0 11512 1116 860 S 0.0 0.0 0:00.00 postfix-queue 1081 mhandler 16 0 11516 1156 884 S 0.0 0.0 0:00.00 postfix-queue 1082 mhandler 15 0 11512 1120 860 S 0.0 0.0 0:00.00 postfix-queue 1089 popuser 15 0 33892 1972 1200 S 0.0 0.1 0:00.02 pop3d 1116 mhandler 16 0 11516 1164 884 S 0.0 0.0 0:00.00 postfix-queue 1117 mhandler 15 0 11516 1124 860 S 0.0 0.0 0:00.00 postfix-queue 1120 mhandler 16 0 11516 1160 884 S 0.0 0.0 0:00.00 postfix-queue 1121 mhandler 15 0 11512 1120 860 S 0.0 0.0 0:00.00 postfix-queue 1130 mhandler 17 0 11516 1160 884 S 0.0 0.0 0:00.00 postfix-queue 1131 mhandler 15 0 11516 1120 860 S 0.0 0.0 0:00.00 postfix-queue 1149 root 17 -4 12572 680 356 S 0.0 0.0 0:00.00 udevd 1181 mhandler 16 0 11516 1160 884 S 0.0 0.0 0:00.00 postfix-queue 1183 mhandler 15 0 11512 1116 860 S 0.0 0.0 0:00.00 postfix-queue 1224 mhandler 16 0 11516 1160 884 S 0.0 0.0 0:00.00 postfix-queue 1225 mhandler 15 0 11516 1120 860 S 0.0 0.0 0:00.00 postfix-queue 1228 apache 15 0 345m 34m 5472 S 0.0 1.1 0:04.64 httpd 1241 mhandler 16 0 11516 1156 884 S 0.0 0.0 0:00.00 postfix-queue 1242 mhandler 15 0 11512 1120 860 S 0.0 0.0 0:00.00 postfix-queue 1251 mhandler 17 0 11516 1156 884 S 0.0 0.0 0:00.00 postfix-queue 1252 mhandler 15 0 11516 1120 860 S 0.0 0.0 0:00.00 postfix-queue 1258 apache 15 0 349m 37m 5444 S 0.0 1.2 0:01.28 httpd When I run ps -Al | grep -c postfix-queue it returns 1618! My question is this: is this normal or is there something else going wrong with Postfix? Right now, if I run mailq it is empty, and qshape deferred / qshape active are empty too. Thanks in advance for your help.

  Read the article

• HFS partition mounting read-only

  - by Sid

  Hey, I have an external Western Digital Hard drive with two HFS partitions with journaling disabled. When I connect it to a computer running Linux (Debian or Ubuntu), frequently both partitions are mounted read-only. In the past, mounting them on my Macbook and executing the command to disable the journaling often worked (even though it would tell me that journaling was already disabled) but I would love to have a solution which works every time. Thanks! Edit: In light of Chris Johnsen's comment below - my question is how to mount the filesystem read+write on Linux since it is not automatically doing so itself

  Read the article

• Mysqld not starting due to apparent db corruption

  - by pitosalas

  I am very new at admining mysql, and bad for me, something caused the db to get clobbered. There are many error messages in the log that I am not sure how to safely proceed. Can you give some tips? Here's the log: 110107 15:07:15 mysqld started 110107 15:07:15 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 110107 15:07:15 InnoDB: Starting log scan based on checkpoint at InnoDB: log sequence number 35 515914826. InnoDB: Doing recovery: scanned up to log sequence number 35 515915839 InnoDB: 1 transaction(s) which must be rolled back or cleaned up InnoDB: in total 1 row operations to undo InnoDB: Trx id counter is 0 1697553664 110107 15:07:15 InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percents: 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 InnoDB: Apply batch completed InnoDB: Starting rollback of uncommitted transactions InnoDB: Rolling back trx with id 0 1697553198, 1 rows to undoInnoDB: Error: trying to access page number 3522914176 in space 0, InnoDB: space name ./ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10 110107 15:07:15InnoDB: Assertion failure in thread 3086403264 in file fil0fil.c line 3922 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/mysql/en/Forcing_recovery.html InnoDB: about forcing recovery. mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=0 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 217599 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffc55ac, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x8139eec 0x83721d5 0x833d897 0x833db71 0x832aa38 0x835f025 0x835f7a3 0x830a77e 0x8326b57 0x831c825 0x8317b8d 0x82a9e66 0x8315732 0x834fc9a 0x828d7c3 0x81c29dd 0x81b5620 0x813d9fe 0x40fdf3 0x80d5ff1 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://dev.mysql.com/doc/mysql/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. 110107 15:07:15 mysqld ended

  Read the article

• Thin web server - single or multiple instances per IP address:port?

  - by wchrisjohnson

  I'm deploying a rack/sinatra/web socket app onto several servers and will use thin as the web server (http://code.macournoyer.com/thin/). There are almost no views to show, so I am not front-ending it with a traditional web server like Apache or nginx. In general, you see thin started and the underlying config file for it has the number of server instances to start, say 3, and the port to start with, say 5000. So, in my example, when thin starts, it starts up three instances on a range of ports, starting on port 5000. If I have a series of virtual machines, say 3, 6, 9, etc. that I treat as a cluster, would/should I choose to start a single thin instance on each VM, or multiple instances on each VM? Why? Thanks - Chris

  Read the article

• Migrating users and mailboxes from postfix / Maildir to Postfix with Mysql backend [closed]

  - by Chrispy

  Possible Duplicate: Migrating users and mailboxes from postfix / Maildir to Postfix with Mysql backend So I've got 60 or so users on a hand rolled postfix installation on openbsd and I'd like to move their mailboxes to our new mail server running iRedMail (postfix, vmail/mysql back end) Does anyone know of a good way to do this? Preferably a script I can run to keep syncing the users mailboxes as MX records get updated? I presume one way (though I don't have all their passwords!) would be to have a command line imap client that simulated the users copying their mail themselves but I'm sure there must be a shell / php script to migrate users? Anyone got any bright ideas? Chris.

  Read the article

• How do you synchronise huge sparse files (VM disk images) between machines?

  - by chrisdew

  Is there a command, such as rsync, which can synchronise huge, sparse, files from one linux server to another? It is very important that the destination file remains sparse. It may be longer (but not bigger) than the drive which contains it. Only changed blocks should be sent across the wire. I have tried rsync, but got no joy. groups.google.com/group/mailing.unix.rsync/browse_thread/thread/94f39271980513d3 If I write a programme to do this, am I just reinventing the wheel? http://www.finalcog.com/synchronise-block-devices Thanks, Chris.

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >