Search Results

Search found 1541 results on 62 pages for 'ivy bridge'.

Page 2/62 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Debian network bridge configuration - /etc/network/interfaces

  - by Mathias

  I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

  Read the article

• Copy all bridge traffic to a specific interface

  - by Azendale

  I have a bridge/switch set up an a machine that has multiple ports. Occasionally, I have a vm running through virtualbox, and I'll have it use a virtual adapter and then I add the adapter to the bridge. I have heard that some switches can copy all the traffic they see to a specific port on the bridge, usually for network monitoring. I would like to be able to run some windows based network tools. I do not want to run Windows on the actual hardware, because it would be lots of work to duplicate my setup in windows, so I was thinking if I can copy all traffic to a port, I can send it to a VM with windows. How can I set this up? I think this might be ebtables area, but I don't know ebtables well enough to know for sure, and it always seems like (from my understanding of ebtables) ebtables does something with the traffic (drop, accept, etc), but never copies it.

  Read the article

• Does Ivy's url resolver support transitive retrieval?

  - by Sean

  For some reason I can't seem to resolve the dependencies of my dependencies when using a url resolver to specify a repository's location. However, when using the ibiblio resolver, I am able to retrieve them. For example: <!-- Ivy File --> <ivy-module version="1.0"> <info organisation="org.apache" module="chained-resolvers"/> <dependencies> <dependency org="commons-lang" name="commons-lang" rev="2.0" conf="default"/> <dependency org="checkstyle" name="checkstyle" rev="5.0"/> </dependencies> </ivy-module> <!-- ivysettings file --> <ivysettings> <settings defaultResolver="chained"/> <resolvers> <chain name="chained"> <url name="custom-repo"> <ivy pattern="http://my.internal.domain.name/ivy/[organisation]/[module]/[revision]/ivy-[revision].xml"/> <artifact pattern="http://my.internal.domain.name/ivy/[organisation]/[module]/[revision]/[artifact]-[revision].[ext]"/> </url> <url name="ibiblio-mirror" m2compatible="true"> <artifact pattern="http://mirrors.ibiblio.org/pub/mirrors/maven2/[organisation]/[module]/[revision]/[artifact]-[revision].[ext]" /> </url> <ibiblio name="ibiblio" m2compatible="true"/> </chain> </resolvers> </ivysettings> <!-- checkstyle ivy.xml file generated from pom via ivy:install task --> <?xml version="1.0" encoding="UTF-8"?> <ivy-module version="1.0" xmlns:m="http://ant.apache.org/ivy/maven"> <info organisation="checkstyle" module="checkstyle" revision="5.0" status="release" publication="20090509202448" namespace="maven2" > <license name="GNU Lesser General Public License" url="http://www.gnu.org/licenses/lgpl.txt" /> <description homepage="http://checkstyle.sourceforge.net/"> Checkstyle is a development tool to help programmers write Java code that adheres to a coding standard </description> </info> <configurations> <conf name="default" visibility="public" description="runtime dependencies and master artifact can be used with this conf" extends="runtime,master"/> <conf name="master" visibility="public" description="contains only the artifact published by this module itself, with no transitive dependencies"/> <conf name="compile" visibility="public" description="this is the default scope, used if none is specified. Compile dependencies are available in all classpaths."/> <conf name="provided" visibility="public" description="this is much like compile, but indicates you expect the JDK or a container to provide it. It is only available on the compilation classpath, and is not transitive."/> <conf name="runtime" visibility="public" description="this scope indicates that the dependency is not required for compilation, but is for execution. It is in the runtime and test classpaths, but not the compile classpath." extends="compile"/> <conf name="test" visibility="private" description="this scope indicates that the dependency is not required for normal use of the application, and is only available for the test compilation and execution phases." extends="runtime"/> <conf name="system" visibility="public" description="this scope is similar to provided except that you have to provide the JAR which contains it explicitly. The artifact is always available and is not looked up in a repository."/> <conf name="sources" visibility="public" description="this configuration contains the source artifact of this module, if any."/> <conf name="javadoc" visibility="public" description="this configuration contains the javadoc artifact of this module, if any."/> <conf name="optional" visibility="public" description="contains all optional dependencies"/> </configurations> <publications> <artifact name="checkstyle" type="jar" ext="jar" conf="master"/> </publications> <dependencies> <dependency org="antlr" name="antlr" rev="2.7.6" force="true" conf="compile->compile(*),master(*);runtime->runtime(*)"/> <dependency org="apache" name="commons-beanutils-core" rev="1.7.0" force="true" conf="compile->compile(*),master(*);runtime->runtime(*)"/> <dependency org="apache" name="commons-cli" rev="1.0" force="true" conf="compile->compile(*),master(*);runtime->runtime(*)"/> <dependency org="apache" name="commons-logging" rev="1.0.3" force="true" conf="compile->compile(*),master(*);runtime->runtime(*)"/> <dependency org="com.google.collections" name="google-collections" rev="0.9" force="true" conf="compile->compile(*),master(*);runtime->runtime(*)"/> </dependencies> </ivy-module> Using the "ibiblio" resolver I have no problem resolving my project's two dependencies (commons-lang 2.0 and checkstyle 5.0) and checkstyle's dependencies. However, when attempting to exclusively use the "custom-repo" or "ibiblio-mirror" resolvers, I am able to resolve my project's two explicitly defined dependencies, but not checkstyle's dependencies. Is this possible? Any help would be greatly appreciated.

  Read the article

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• Issues using ivy

  - by Almas

  Hi, I am new bie to ivy. I am using packager resolver and that packager resolver resolves the zip file, unzip it, extracts the jar file from it in temp build file, but it stays temporarily and only the jar file which i specified as a module name gets copied to destination rest of all are ignored. Is there a way i can get all the jar files? I use preseverBuildDirectories but is there a better way to do it? Also is it possible for me to publish an artifact to svn using normal ivy? I got error while i was trying to use ivy 2.1.0 on XP using ant 1.8.0 java.illegalArguementException saying authorization failed. Is there a way i can work through ivy:publish? Is there a way i can use ivy variable in packager.xml? Thanks in advance, Almas

  Read the article

• Ivy failed to resolve dependency : What to check, what to do ?

  - by fardon57

  Hi everyone, I'm using Ivy to resolve dependency in my very small project. It's the first time I'm doing that and it's more to learn as my project is very small. I had a problem 5 minutes ago, when trying to download log4j. My configuration is very basic, I have an ant task : <target name="resolve" description="--> retrieve dependencies with ivy"> <ivy:retrieve/> </target> and my Ivy.xml file is like this : <dependency org="javax.servlet" name="servlet-api" rev="2.5" /> <dependency org="log4j" name="log4j" rev="1.2.15" /> </dependencies> The problem is seems to happen when ivy tries to download jms 1.1 (I suppose it's needed for log4j) as I can see in the console : : ::::::::::::::::::::::::::::::::::::::::::::: [ivy:retrieve] :: FAILED DOWNLOADS :: [ivy:retrieve] :: ^ see resolution messages for details ^ :: [ivy:retrieve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:retrieve] :: javax.jms#jms;1.1!jms.jar [ivy:retrieve] :: com.sun.jdmk#jmxtools;1.2.1!jmxtools.jar [ivy:retrieve] :: com.sun.jmx#jmxri;1.2.1!jmxri.jar [ivy:retrieve] :::::::::::::::::::::::::::::::::::::::::::::: Is there anything I can do ? Thanks a lot guys. F

  Read the article

• Xen Bridge only working when IP Assigned

  - by m.sr

  Hey! Just had an (in my sense) obscure situation. I have a Xen Server with bridged networking. Everything works fine since month. A while ago i configuresd a second bridge. only some DomUs get an channel on this bridge - my Dom0 doesn't need to / should'nt use this bridge. So just 5 minutes ago while rebooting the xen host (because of an other problem with the UPS) i decided to removed the fixed ip from the the interface of the Dom0 which belongs to the second bridge. So after reboot i noticed that none of the interfaces on the second bridge is available. I couldn't find a problem. Everything was just like before the reboot, except the interface of the Dom0 had no IP address. After a while i tried to give the DomO interface of this bridge an IP again and ... BOOM ... everything is up and running again! WTF? Why is it important to have the interface of a bridge configured in the Dom0? Even when confiugured 'wrong' (complitely different netowkr settings as the network really hanging on the bridge) everythjing works fine ... I don't get it. Could please someone explain? Tnaks a lot!

  Read the article

• Problem compiling hive with ant

  - by conandor

  I compiling with Solaris 10 SPARC, jdk 1.6 from Sun, Ant 1.7.1 from OpenCSW. I have no problem running hadoop 0.17.2.1 However, I have problem compiling/integrating hive with the error 'cannot find symbol', although I followed the tutorial. I have the hive source code from SVN exactly from tutorial. How can I know the hive version I compiling and how can I compile against hadoop 0.17.2.1? Please advice. Thank you. -bash-3.00$ export PATH=/usr/jdk/instances/jdk1.6.0/bin:/usr/bin:/opt/csw/bin:/opt/webstack/bin -bash-3.00$ export JAVA_HOME=/usr/jdk/instances/jdk1.6.0 -bash-3.00$ export HADOOP=/export/home/mywork/hadoop-0.17.2.1/bin/hadoop -bash-3.00$ /opt/csw/bin/ant package -Dhadoop.version=0.17.2.1 Buildfile: build.xml jar: create-dirs: compile-ant-tasks: create-dirs: init: compile: [echo] Compiling: anttasks deploy-ant-tasks: create-dirs: init: compile: [echo] Compiling: anttasks jar: init: compile: ivy-init-dirs: ivy-download: [get] Getting: http://repo2.maven.org/maven2/org/apache/ivy/ivy/2.1.0/ivy-2.1.0.jar [get] To: /export/home/mywork/hive/build/ivy/lib/ivy-2.1.0.jar [get] Not modified - so not downloaded ivy-probe-antlib: ivy-init-antlib: ivy-init: ivy-retrieve-hadoop-source: [ivy:retrieve] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:retrieve] :: loading settings :: file = /export/home/mywork/hive/ivy/ivysettings.xml [ivy:retrieve] :: resolving dependencies :: org.apache.hadoop.hive#shims;working@kaili [ivy:retrieve] confs: [default] [ivy:retrieve] found hadoop#core;0.17.2.1 in hadoop-source [ivy:retrieve] found hadoop#core;0.18.3 in hadoop-source [ivy:retrieve] found hadoop#core;0.19.0 in hadoop-source [ivy:retrieve] found hadoop#core;0.20.0 in hadoop-source [ivy:retrieve] :: resolution report :: resolve 25878ms :: artifacts dl 37ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 4 | 0 | 0 | 0 || 4 | 0 | --------------------------------------------------------------------- [ivy:retrieve] :: retrieving :: org.apache.hadoop.hive#shims [ivy:retrieve] confs: [default] [ivy:retrieve] 0 artifacts copied, 4 already retrieved (0kB/82ms) install-hadoopcore-internal: build_shims: [echo] Compiling shims against hadoop 0.17.2.1 (/export/home/mywork/hive/build/hadoopcore/hadoop-0.17.2.1) ivy-init-dirs: ivy-download: [get] Getting: http://repo2.maven.org/maven2/org/apache/ivy/ivy/2.1.0/ivy-2.1.0.jar [get] To: /export/home/mywork/hive/build/ivy/lib/ivy-2.1.0.jar [get] Not modified - so not downloaded ivy-probe-antlib: ivy-init-antlib: ivy-init: ivy-retrieve-hadoop-source: [ivy:retrieve] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:retrieve] :: loading settings :: file = /export/home/mywork/hive/ivy/ivysettings.xml [ivy:retrieve] :: resolving dependencies :: org.apache.hadoop.hive#shims;working@kaili [ivy:retrieve] confs: [default] [ivy:retrieve] found hadoop#core;0.17.2.1 in hadoop-source [ivy:retrieve] found hadoop#core;0.18.3 in hadoop-source [ivy:retrieve] found hadoop#core;0.19.0 in hadoop-source [ivy:retrieve] found hadoop#core;0.20.0 in hadoop-source [ivy:retrieve] :: resolution report :: resolve 12041ms :: artifacts dl 30ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 4 | 0 | 0 | 0 || 4 | 0 | --------------------------------------------------------------------- [ivy:retrieve] :: retrieving :: org.apache.hadoop.hive#shims [ivy:retrieve] confs: [default] [ivy:retrieve] 0 artifacts copied, 4 already retrieved (0kB/39ms) install-hadoopcore-internal: build_shims: [echo] Compiling shims against hadoop 0.18.3 (/export/home/mywork/hive/build/hadoopcore/hadoop-0.18.3) ivy-init-dirs: ivy-download: [get] Getting: http://repo2.maven.org/maven2/org/apache/ivy/ivy/2.1.0/ivy-2.1.0.jar [get] To: /export/home/mywork/hive/build/ivy/lib/ivy-2.1.0.jar [get] Not modified - so not downloaded ivy-probe-antlib: ivy-init-antlib: ivy-init: ivy-retrieve-hadoop-source: [ivy:retrieve] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:retrieve] :: loading settings :: file = /export/home/mywork/hive/ivy/ivysettings.xml [ivy:retrieve] :: resolving dependencies :: org.apache.hadoop.hive#shims;working@kaili [ivy:retrieve] confs: [default] [ivy:retrieve] found hadoop#core;0.17.2.1 in hadoop-source [ivy:retrieve] found hadoop#core;0.18.3 in hadoop-source [ivy:retrieve] found hadoop#core;0.19.0 in hadoop-source [ivy:retrieve] found hadoop#core;0.20.0 in hadoop-source [ivy:retrieve] :: resolution report :: resolve 11107ms :: artifacts dl 36ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 4 | 0 | 0 | 0 || 4 | 0 | --------------------------------------------------------------------- [ivy:retrieve] :: retrieving :: org.apache.hadoop.hive#shims [ivy:retrieve] confs: [default] [ivy:retrieve] 0 artifacts copied, 4 already retrieved (0kB/49ms) install-hadoopcore-internal: build_shims: [echo] Compiling shims against hadoop 0.19.0 (/export/home/mywork/hive/build/hadoopcore/hadoop-0.19.0) ivy-init-dirs: ivy-download: [get] Getting: http://repo2.maven.org/maven2/org/apache/ivy/ivy/2.1.0/ivy-2.1.0.jar [get] To: /export/home/mywork/hive/build/ivy/lib/ivy-2.1.0.jar [get] Not modified - so not downloaded ivy-probe-antlib: ivy-init-antlib: ivy-init: ivy-retrieve-hadoop-source: [ivy:retrieve] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:retrieve] :: loading settings :: file = /export/home/mywork/hive/ivy/ivysettings.xml [ivy:retrieve] :: resolving dependencies :: org.apache.hadoop.hive#shims;working@kaili [ivy:retrieve] confs: [default] [ivy:retrieve] found hadoop#core;0.17.2.1 in hadoop-source [ivy:retrieve] found hadoop#core;0.18.3 in hadoop-source [ivy:retrieve] found hadoop#core;0.19.0 in hadoop-source [ivy:retrieve] found hadoop#core;0.20.0 in hadoop-source [ivy:retrieve] :: resolution report :: resolve 9969ms :: artifacts dl 33ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 4 | 0 | 0 | 0 || 4 | 0 | --------------------------------------------------------------------- [ivy:retrieve] :: retrieving :: org.apache.hadoop.hive#shims [ivy:retrieve] confs: [default] [ivy:retrieve] 0 artifacts copied, 4 already retrieved (0kB/57ms) install-hadoopcore-internal: build_shims: [echo] Compiling shims against hadoop 0.20.0 (/export/home/mywork/hive/build/hadoopcore/hadoop-0.20.0) jar: [echo] Jar: shims create-dirs: compile-ant-tasks: create-dirs: init: compile: [echo] Compiling: anttasks deploy-ant-tasks: create-dirs: init: compile: [echo] Compiling: anttasks jar: init: install-hadoopcore: install-hadoopcore-default: ivy-init-dirs: ivy-download: [get] Getting: http://repo2.maven.org/maven2/org/apache/ivy/ivy/2.1.0/ivy-2.1.0.jar [get] To: /export/home/mywork/hive/build/ivy/lib/ivy-2.1.0.jar [get] Not modified - so not downloaded ivy-probe-antlib: ivy-init-antlib: ivy-init: ivy-retrieve-hadoop-source: [ivy:retrieve] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:retrieve] :: loading settings :: file = /export/home/mywork/hive/ivy/ivysettings.xml [ivy:retrieve] :: resolving dependencies :: org.apache.hadoop.hive#common;working@kaili [ivy:retrieve] confs: [default] [ivy:retrieve] found hadoop#core;0.20.0 in hadoop-source [ivy:retrieve] :: resolution report :: resolve 4864ms :: artifacts dl 13ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 1 | 0 | 0 | 0 || 1 | 0 | --------------------------------------------------------------------- [ivy:retrieve] :: retrieving :: org.apache.hadoop.hive#common [ivy:retrieve] confs: [default] [ivy:retrieve] 0 artifacts copied, 1 already retrieved (0kB/52ms) install-hadoopcore-internal: setup: compile: [echo] Compiling: common jar: [echo] Jar: common create-dirs: compile-ant-tasks: create-dirs: init: compile: [echo] Compiling: anttasks deploy-ant-tasks: create-dirs: init: compile: [echo] Compiling: anttasks jar: init: dynamic-serde: compile: [echo] Compiling: hive [javac] Compiling 167 source files to /export/home/mywork/hive/build/serde/classes [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/objectinspector/ObjectInspectorFactory.java:30: cannot find symbol [javac] symbol : class PrimitiveObjectInspectorFactory [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.PrimitiveObjectInspectorFactory; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/objectinspector/ObjectInspectorFactory.java:31: cannot find symbol [javac] symbol : class PrimitiveObjectInspectorUtils [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.PrimitiveObjectInspectorUtils; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/MetadataTypedColumnsetSerDe.java:31: cannot find symbol [javac] symbol : class MetadataListStructObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector [javac] import org.apache.hadoop.hive.serde2.objectinspector.MetadataListStructObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/SerDeUtils.java:33: cannot find symbol [javac] symbol : class BooleanObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.BooleanObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/SerDeUtils.java:35: cannot find symbol [javac] symbol : class DoubleObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.DoubleObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/SerDeUtils.java:36: cannot find symbol [javac] symbol : class FloatObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.FloatObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/SerDeUtils.java:39: cannot find symbol [javac] symbol : class ShortObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.ShortObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/SerDeUtils.java:40: cannot find symbol [javac] symbol : class StringObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.StringObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/binarysortable/BinarySortableSerDe.java:44: cannot find symbol [javac] symbol : class BooleanObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.BooleanObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/binarysortable/BinarySortableSerDe.java:46: cannot find symbol [javac] symbol : class DoubleObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.DoubleObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/binarysortable/BinarySortableSerDe.java:47: cannot find symbol [javac] symbol : class FloatObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.FloatObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/binarysortable/BinarySortableSerDe.java:50: cannot find symbol [javac] symbol : class ShortObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.ShortObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/binarysortable/BinarySortableSerDe.java:51: cannot find symbol [javac] symbol : class StringObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.StringObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazySimpleSerDe.java:43: cannot find symbol [javac] symbol : class PrimitiveObjectInspectorFactory [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.PrimitiveObjectInspectorFactory; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/columnar/ColumnarSerDe.java:41: cannot find symbol [javac] symbol : class PrimitiveObjectInspectorFactory [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.PrimitiveObjectInspectorFactory; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyStruct.java:26: cannot find symbol [javac] symbol : class LazySimpleStructObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.lazy.objectinspector [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.LazySimpleStructObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyStruct.java:39: cannot find symbol [javac] symbol: class LazySimpleStructObjectInspector [javac] LazyNonPrimitive<LazySimpleStructObjectInspector> { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyStruct.java:68: cannot find symbol [javac] symbol : class LazySimpleStructObjectInspector [javac] location: class org.apache.hadoop.hive.serde2.lazy.LazyStruct [javac] public LazyStruct(LazySimpleStructObjectInspector oi) { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/dynamic_type/DynamicSerDe.java:36: cannot find symbol [javac] symbol : class PrimitiveObjectInspectorFactory [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.PrimitiveObjectInspectorFactory; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/dynamic_type/DynamicSerDe.java:37: cannot find symbol [javac] symbol : class PrimitiveObjectInspectorUtils [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.PrimitiveObjectInspectorUtils; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/dynamic_type/DynamicSerDeTypeString.java:23: cannot find symbol [javac] symbol : class StringObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.StringObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/dynamic_type/DynamicSerDeTypei16.java:23: cannot find symbol [javac] symbol : class ShortObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.ShortObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/dynamic_type/DynamicSerDeTypeDouble.java:23: cannot find symbol [javac] symbol : class DoubleObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.DoubleObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/dynamic_type/DynamicSerDeTypeBool.java:23: cannot find symbol [javac] symbol : class BooleanObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.objectinspector.primitive [javac] import org.apache.hadoop.hive.serde2.objectinspector.primitive.BooleanObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyBoolean.java:20: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyBooleanObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyBoolean.java:37: cannot find symbol [javac] symbol: class LazyBooleanObjectInspector [javac] LazyPrimitive<LazyBooleanObjectInspector, BooleanWritable> { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyBoolean.java:39: cannot find symbol [javac] symbol : class LazyBooleanObjectInspector [javac] location: class org.apache.hadoop.hive.serde2.lazy.LazyBoolean [javac] public LazyBoolean(LazyBooleanObjectInspector oi) { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyByte.java:21: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyByteObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyByte.java:37: cannot find symbol [javac] symbol: class LazyByteObjectInspector [javac] LazyPrimitive<LazyByteObjectInspector, ByteWritable> { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyByte.java:39: cannot find symbol [javac] symbol : class LazyByteObjectInspector [javac] location: class org.apache.hadoop.hive.serde2.lazy.LazyByte [javac] public LazyByte(LazyByteObjectInspector oi) { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyDouble.java:23: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyDoubleObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyDouble.java:31: cannot find symbol [javac] symbol: class LazyDoubleObjectInspector [javac] LazyPrimitive<LazyDoubleObjectInspector, DoubleWritable> { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyDouble.java:33: cannot find symbol [javac] symbol : class LazyDoubleObjectInspector [javac] location: class org.apache.hadoop.hive.serde2.lazy.LazyDouble [javac] public LazyDouble(LazyDoubleObjectInspector oi) { [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:25: cannot find symbol [javac] symbol : class LazyObjectInspectorFactory [javac] location: package org.apache.hadoop.hive.serde2.lazy.objectinspector [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.LazyObjectInspectorFactory; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:26: cannot find symbol [javac] symbol : class LazySimpleStructObjectInspector [javac] location: package org.apache.hadoop.hive.serde2.lazy.objectinspector [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.LazySimpleStructObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:27: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyBooleanObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:28: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyByteObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:29: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyDoubleObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:30: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyFloatObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:31: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyIntObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:32: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyLongObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:33: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyPrimitiveObjectInspectorFactory; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:34: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyShortObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFactory.java:35: package org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive does not exist [javac] import org.apache.hadoop.hive.serde2.lazy.objectinspector.primitive.LazyStringObjectInspector; [javac] ^ [javac] /export/home/mywork/hive/serde/src/java/org/apache/hadoop/hive/serde2/lazy/LazyFloat.java:

  Read the article

• How to properly set up a network bridge using bridge-utils using wlan0 as the internet "source"?

  - by Miguel Azevedo

  Hey everyone this is my first post so go easy on me. I currently have a laptop with Ubuntu Studio 12.04 Beta 2 that is supplying a wireless internet connection to a windows 7 desktop computer that's connected directly to the laptop through Ethernet. I'm using the "shared to other computers" method in network manager but I believe it doesn't work with what I want to do. I would like to have the windows computer on the same subnet as every other computer in my house (192.168.1.x) so I can use LAN applications (MIDI over WiFi, Bonjour etc.) on the windows computer without having to run a massive cable to the router. I've been googling endlessly and tried multiple configurations in the /etc/network/interfaces file without success. All of them would report "cannot add wlan0 to bridge" Is there a specific way to make this work? What am I missing? Thank you

  Read the article

• Ant-Ivy-Scala Template: any suggestions on improvements?

  - by luigi-prog

  I just created a template project for Scala using Ant and Apache Ivy. I want to get the communitie's input on any improvements to the Template so it can be improved. The Environment effectively consists of 3 files: build.xml ivy.xml ivysettings.xml running ant init will create all needed directories. I was wondering if there are any Ant or Apache Ivy gurus around that could give some input. The Git Project is Located Here And the Project HomePage here

  Read the article

• Better way to set up samba bridge?

  - by Adam Butler

  I have an old ubuntu laptop hooked up to between my wireless network and a wired media player box. I had previously shared my wireless network connection so the media player had internet access (ie. via nat) because it was a different subnet it could not access the file shares on the wireless network. To get around this I mounted the drives from the wireless network on the laptop and re-shared them with samba. This worked ok but had some drawbacks, it seemed slow and if network computers were turned off when the laptop rebooted I had to manually mount the shares. I've just re-installed with the latest ubuntu and was wondering if there is a better way to do this. Is there some way to bridge so the media player appears to be on the wireless network? Would this give better performance? Any other options? I'm also thinking there might be some samba options that could buffer files?

  Read the article

• Setting up a Network Bridge on Linux VM (Windows 7 Host)

  - by GrandAdmiral

  I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

  Read the article

• Ivy bridge i3 recognized as Xeon e3-1200

  - by user287072

  The situation: I've got a Ivy bridge i3 3225 which is being recognized as a Xeon e3-1200 series cpu by Ubuntu 14.04 64bit. The problem: cpu fan makes more noise than necessary (under dual-boot Win8 the fans are off), cannot install the intel graphics drivers from 01.org. Goals: - find a fix for the load fans could be they are not CPU related, I've tried some fan controller packages, but they made no difference. - get the intel graphics to install (this now fails as xeon cpu's are not supported, I got the package working on a i5 laptop) - get to know some more about how hardware recognition works Tried so far: - a reinstall of Ubuntu, but it was recognized again as a Xeon cpu. - different fan control packages, but they either do not recognized the fans, or just keep fan speed to high. Any pointers as how to get Ubuntu recognized it are more than welcome. lspci -nnQ 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 660] [10de:11c0] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)

  Read the article

• Cisco 350 Bridge vxWorks connecting to IOS

  - by jinanwow

  I have 2 bridges one is a Cisco 350 Bridge with vxWorks as a non-root bridge w/o clients and another Cisco 350 Bridge running IOS set as Root Bridge. It seems no matter what configuration I can't seem to associate the vxworks to the IOS bridge. I have even tried swapping the roles and they still do not communicate. Any ideas how I can make the two connect, I would have upgraded the 350 to IOS as well but it will not upgrade. From my research it appears there is no way for these two devices to communicate but I wanted to be sure of that.

  Read the article

• Manage duplicate jar files using ant and ivy.

  - by lawardy

  HI, I am using ant build script to build my java app and utilizing Ivy to manage its dependency. As my application is dependent/subset of other application(Main App), when running it, I set the classpath to point to lib jars of the Main App. As I tried to build the kit using ant and ivy, it includes/retrieve all the jars that is required as specified in ivy.xml The problem is, some of the jar files are duplicated with with jars file in the main app folders. Is there a way to set the classpath in build.xml to ignore retrieving jar files that already exist in the main app's lib folder. Thanks

  Read the article

• ant cpptask with ivy

  - by AC

  A company I am working for, has some c binaries build with ant using cpptask. They use ivy to retrieve shared c libraries every time we start a build which wastes a significant amount of time comparing the revisions and downloading, when then only need to be download if the header files have changed. I have added a target which sets a var, which causes the build to skip over the ivy steps but I'd like a better solution. I see that cpptask creates a file history.xml and only rebuilds to binary if any of the sources have change. I'd like to know if there is way to independently test if the binary needs to build, and it does, I'd like it fire off the ivy targets. I'd also like for a variable to be set if the binary was rebuilt so that I can conditionally start an rpm generation task

  Read the article

• Bridge Laptop's Ethernet to Wireless

  - by Kalphiter

  The laptop wirelessly connects to my router, while the desktop is connected to the laptop with an ethernet wire. The desktop successfully can use the internet if I set the connection to be shared on the laptop. The problem is, I need the laptop to forward the desktop's packets across the link unmodified, so the desktop is on the same network as the router. The desktop needs its IP assigned by the router, so that I can access it from another computer as "192.168.1.8".

  Read the article

• how to make bridge networking with KVM work in Fedora19

  - by netllama

  I'm attempting to get several virtual machines setup on a Fedora-19 host system, with the traditional bridge network devices (br0, br1, etc). I've done this many times before with older versions of Fedora (16, 14, etc), and it just works. However, for reasons that I cannot figure out, the bridge doesn't seem to be working in Fedora19. While I can successfully connect to the outside world (local network + internet) from inside a VM, nothing can communicate with the VM from outside (local network). I'm referring to something as trivial as pinging. From inside the VM, I can ping anything successfully (0% packet loss). However, from outside the VM (on the host, or any other system on the same network), I see 100% packet loss when pinging the IP address of the VM. My first question is simply, does anyone else have this working successfully in F19? And if so, what steps did you need to follow? I'm not using NetworkManager at all, its all the network service. There are no firewalls involved anywhere (iptables & firewall services are currently disabled). Here's the current host configuration: # brctl show bridge name bridge id STP enabled interfaces br0 8000.38eaa792efe5 no em2 vnet1 br1 8000.38eaa792efe6 no em3 br2 8000.38eaa792efe7 no em4 vnet0 virbr0 8000.525400db3ebf yes virbr0-nic # more /etc/sysconfig/network-scripts/ifcfg-em2 TYPE=Ethernet BRIDGE="br0" NAME=em2 DEVICE="em2" UUID=aeaa839e-c89c-4d6e-9daa-79b6a1b919bd ONBOOT=yes HWADDR=38:EA:A7:92:EF:E5 NM_CONTROLLED="no" # more /etc/sysconfig/network-scripts/ifcfg-br0 TYPE=Bridge NM_CONTROLLED="no" BOOTPROTO=dhcp NAME=br0 DEVICE="br0" ONBOOT=yes # ifconfig em2 ;ifconfig br0 em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 1000 (Ethernet) RX packets 100093 bytes 52354831 (49.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 25321 bytes 15791341 (15.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xf7d00000-f7e00000 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.31.99.226 netmask 255.255.252.0 broadcast 10.31.99.255 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 0 (Ethernet) RX packets 19619 bytes 1963328 (1.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11 bytes 1074 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Relevant section from /etc/libvirt/qemu/foo.xml (one of the VMs with this problem): <interface type='bridge'> <mac address='52:54:00:26:22:9d'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> # ps -ef | grep qemu qemu 1491 1 82 13:25 ? 00:42:09 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name cuda-linux64-build5 -S -machine pc-0.13,accel=kvm,usb=off -cpu SandyBridge,+pdpe1gb,+osxsave,+dca,+pcid,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme -m 16384 -smp 6,sockets=6,cores=1,threads=1 -uuid 6e930234-bdfd-044d-2787-22d4bbbe30b1 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/cuda-linux64-build5.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/libvirt/images/cuda-linux64-build5.img,if=none,id=drive-virtio-disk0,format=raw,cache=writeback -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:26:22:9d,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 I can provide additional information, if requested. thanks!

  Read the article

• WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

  - by user94156

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• arp problems with transparent bridge on linux

  - by Mink

  I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

  Read the article

• ivy dependency on external JAR

  - by Misha Koshelev

  Dear All: I am battling with Ivy (I tried maven but had an event more difficult time setting up the JBoss repository for Hibernate). Quick question - I am using this wonderful package: http://ooweb.sourceforge.net/index.html Unfortunately, the JAR is only available through Sourceforge: http://sourceforge.net/projects/ooweb/files/ooweb/0.8.0/ooweb-0.8.0-bin.tar.gz/download Is there a way to get Ivy to download a specific JAR? For that matter, is it possible to do with Maven? Thank you! Misha

  Read the article

• Managing conflicting ivy repositories (in eclipse)

  - by Stephen

  I've got eclipse workspaces for my full time job and my home test work that are both set up with ivy (and using ivyDE). However, I'm finding that I'm getting strange behaviour and conflicts between the different workspaces - issues like not being able to find certain dependencies, or not compiling etc. Is there a way in ivy or ivyDE to set the home .ivy2 directory so that I can split my workspaces? At the moment, I'm alternating different directories for my .ivy2 cache.

  Read the article

• Z77 Motherboard with i7-2600K cpu, what will not work?

  - by Mxx

  I'm building a new system. So far I think I narrowed it down to Gigabyte GA-Z77X-UD5H (Z77 Ivy Bridge chipset) motherboard. I was planning to get i5-3570K(Ivy Bridge) cpu, but now I can get i7-2600K(Sandy Bridge) cpu for free. It is my understanding that Ivy Bridge platform brings support for PCIe3 and (additional?)USB3 ports. If I were to put SB cpu into IB motherboard, what is going to happen to PCIe3 slot? Will it not work at all or downgrade to PCIe2? Also, what is the situation with USB3 ports?

  Read the article

• cannot ssh to computer behind a dd-wrt bridge

  - by Jayaraman

  In my home network , i have dd-wrt router in another room , which bridges wifi from main home router (linksys) to the computers wired behind dd-wrt router. Now I cannot ssh from my laptop ( connected to linksys wifi) to the computers behind dd-wrt wifi bridge. I am able to ping the individual computers behind the dd-wrt bridge. When it comes to ssh or telnet to the computers , it is blocked. What can I do to make dd-wrt bridge to open up all ports in the dd-wrt bridge ?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >