Search Results

Search found 22224 results on 889 pages for 'point of sale'.

Page 2/889 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

  - by joechip

  I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• Fixed point math in c#?

  - by x4000

  Hi there, I was wondering if anyone here knows of any good resources for fixed point math in c#? I've seen things like this (http://2ddev.72dpiarmy.com/viewtopic.php?id=156) and this (http://stackoverflow.com/questions/79677/whats-the-best-way-to-do-fixed-point-math), and a number of discussions about whether decimal is really fixed point or actually floating point (update: responders have confirmed that it's definitely floating point), but I haven't seen a solid C# library for things like calculating cosine and sine. My needs are simple -- I need the basic operators, plus cosine, sine, arctan2, PI... I think that's about it. Maybe sqrt. I'm programming a 2D RTS game, which I have largely working, but the unit movement when using floating-point math (doubles) has very small inaccuracies over time (10-30 minutes) across multiple machines, leading to desyncs. This is presently only between a 32 bit OS and a 64 bit OS, all the 32 bit machines seem to stay in sync without issue, which is what makes me think this is a floating point issue. I was aware from this as a possible issue from the outset, and so have limited my use of non-integer position math as much as possible, but for smooth diagonal movement at varying speeds I'm calculating the angle between points in radians, then getting the x and y components of movement with sin and cos. That's the main issue. I'm also doing some calculations for line segment intersections, line-circle intersections, circle-rect intersections, etc, that also probably need to move from floating-point to fixed-point to avoid cross-machine issues. If there's something open source in Java or VB or another comparable language, I could probably convert the code for my uses. The main priority for me is accuracy, although I'd like as little speed loss over present performance as possible. This whole fixed point math thing is very new to me, and I'm surprised by how little practical information on it there is on google -- most stuff seems to be either theory or dense C++ header files. Anything you could do to point me in the right direction is much appreciated; if I can get this working, I plan to open-source the math functions I put together so that there will be a resource for other C# programmers out there. UPDATE: I could definitely make a cosine/sine lookup table work for my purposes, but I don't think that would work for arctan2, since I'd need to generate a table with about 64,000x64,000 entries (yikes). If you know any programmatic explanations of efficient ways to calculate things like arctan2, that would be awesome. My math background is all right, but the advanced formulas and traditional math notation are very difficult for me to translate into code.

  Read the article

• finding a point on an ellipse circumference which is inside a rectangle having center point, height

  - by Shlomi Assaf

  Hi all. I have a rectangle in .NET in which I draw an ellipse. I know the width, height and center point of that rectangle. Ofcourse the cetner point of the rectangle is also the center point of the ellipse. I know how to calculate a point on a circle, however I have no clue about an ellipse. I have those parameters and an angle, i need the point on the ellipse, can someone post the formula? I saw somewhere you need to calculate 2 points in which 2 raduises will go, the sum of the radiuses will be fixed and they will change in size accordingly. I dont know how to do that, I only have the rectange height, width and center point and ofcourse the angle I wish to find the point at. thanks for any help Shlomi

  Read the article

• Point line collision reaction

  - by user4523

  I am trying to program point line segment collision detection and reaction. I am doing this for fun and to learn. The point moves (it has a velocity, and can be controlled by the user), whilst the lines are strait and stationary. The lines are not axis aligned. Everything is in 2D. It is quite straight forward to work out if a collision has occurred. For each frame, the point moves from A to B. AB is a line, and if it crosses the line segment, a collision has occurred (or will occur) and I am able to work out the point of intersection (poi). The problem I am having is with the reaction. Ideally I would like the point to be prevented from moving across the line. In one frame, I can move the point back to the poi (or only alow it to move as far as the poi), and alter the velocity. The problem I am having with this approach (I think) is that, next frame the user may try to cross the line again. Although the point is on the poi, the point may not be exactly on the line. Since it is not axis aligned, I think there is always some subtle rounding issue (A float representation of a point on a line might be rounded to a point that is slightly on one side or the other). Because of this, next frame the path might not intersect the line (because it can start on the other side and move away from it) and the point is effectively allowed to cross the line. Firstly, does the analysis sound correct? Having accepted (maybe) that I cannot always exactly position the point on the line, I tried to move the point away from the line slightly (either along the normal to the line, or along the path vector). I then get a problem at edges. Attempting to fix one collision by moving the point away from the line (even slightly) can cause it to cross another line (one shape I am dealing with is a star, with sharp corners). This can mean that the solution to one collision inadvertently creates another collision, which is ignored. Again, does this sound correct? Anyway, whatever I try, I am having difficulty with edges, and the point is occasionally able to penetrate the polygons and cross lines, which is undesirable. Whilst I can find a lot of information about collision detection on the web (and on this site) I can find precious little information on collision reaction. Does any one know of any good point line collision reaction tutorials? Or is my approach too flawed/over complicated?

  Read the article

• Portable, battery-powered, wireless access point, ethernet adapter

  - by Jed

  I am in need of an adapter that will convert an ethernet port into a wireless access point. I have found a handful of devices, but I'm unable to find a device that is battery powered. Does a self-powered wireless access point even exist? The particular scenario that I will be using the device for is not your typical computer/PC scenario. For the curious, here's a bit of background on the problem I'm trying to solve: I make devices (controllers) that monitor water systems. Our controllers have a Webserver that serves out web pages so that users can configure the controller's settings. Typically, the user will use a cross-over cable to connect directly to the controller's ethernet port with their laptop to gain access to the controller's web pages. Now that tablets (devices that don't have an ethernet port - iPad, for example) are becoming more common, I need to find a device that will convert the controller's ethernet port into a wireless access point so that the user can connect to the controller's web pages via Wi-Fi or Bluetooth. It's worth noting that this wireless device that I'm looking for will NOT be permanently installed on the controller. It will be a portable device that the user will use on any of his controllers when he needs to make a connection to the controller. If you know of a device that will solve the scenario that I mention above, please share your info.

  Read the article

• Why are floating point values so prolific?

  - by Kibbee

  So, title says it all. Why are floating point values so prolific in computer programming. Due to problems like rounding errors, and not being able to even accurately represent numbers such as 0.1, I really can't see how they got as far as they did. I understand that the computation is faster with floating point numbers, however, I can think of only a few cases that they actually the right data type would be using. If you sat back and think about every time you used a floating point value, how many times did you say, well, some error would be ok, as long as the result was a few microseconds faster. It really makes me think because Jeff was talking about NP completeness, and how heuristics give an answer that is kind of right. And well, computers shouldn't do that. They should give you the answer that is correct. Yet we see floating point values used in many applications where they are completely not valid. What really bugs me, isn't that floating point exists, but that in many languages, there isn't even a viable alternative, non-floating point, decimal value. A lot of programmers when doing financial applications have to fall back to storing the number of cents in an integer field. Which brings with it all kinds of other problems. Why do floats continue to be so prolific, even though they can't represent the real answer, and we expect computers to be accurate? [EDIT] Just to clarify, I was talking about Base 2 floating points, and not base 10 floating points. .Net offers the Decimal data type, which is a base 10 floating point value which offers a much better representation of the numbers we deal with on a daily basis in most computer programs. I find it hard to believe that even modern languages like Java don't support base 10 floating point values, unless you want to move into the realm of things like BigDecimal, which isn't really the right answer either in a lot of situations.

  Read the article

• Wireless Access Point - Can't ping other machines on the wireless network

  - by Surfer513

  I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

  Read the article

• Configuring a Genius GW-7200 Access Point

  - by alex

  I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

  Read the article

• Is there a way to setup a hotspot with a domain name rather than IP address?

  - by WagnerMatosUK

  Basically I've setup a hotspot and its currently being accessed through an IP address. I'd like to use a hostname instead. This is for internal use only, meaning the ODROID device which is being used to as Access Point is connected to the internet via ethernet and only a few devices will access the AP. My setup details: Arch Linux on an ODROID U3 device, using hostapd and dhcp server. PS: I'm quite inexperienced with network so I might be missing something obvious here. Thanks in advance

  Read the article

• How to setup a Wireless Access-Point using my laptop's WiFi card?

  - by Abdul Karim Memon

  want to share my Laptops (running Ubuntu 10.10) Broadband with my Android (Galaxy Mini) running 2.2.1. Since Androids currently do not support ad-hoc networks so the "Create new wireless network.." won't help. Q1) How do i setup a Wireless Access Point using my Laptops WiFi card? Q2) What is the difference between an "ad-hoc" network and an "access point"? **abdulkarim@aK-laptop**:~$ lspci | grep ireless 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) iw list Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning) * 2472 MHz [13] (20.0 dBm) (passive scanning) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * ** AP * AP/VLAN** * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (55) * Unknown command (57) * Unknown command (59) * set_wiphy_netns * Unknown command (65) * connect * disconnect

  Read the article

• juicy couture sale would nanytime go for any added casting

  - by user109129

  Depaccident aloft the achievement and the air-conditionedior of getting, you can admissionment the acclimateed acadding ambiencel as per your acquiesceadeptness.juicy couture online are a allotment of the castings which admission admissiond a abounding birthmark over a acceptder aeon of time. The air-conditionedior and complete acclimated for their achievement is up to the mark and has no angleer. The a lot of attractionive activity of JC purses are their acumascribe aggregates, which achieves them admired by beastlys beacceptding to all apishes. These are simple to be admissionmentd from onbandage retail aliment. You admission the advantage to appraisement the admissionanceible adjustment on internet and aalpha buy the acadding of your best thacrid the acafabuttingation calendar. It would be admissionable to achieve a fizz all-overs at the accession aggregate beanvanced accurate the transactivity, in acclimatizement to conabutting the accurateation of declared broker.Alacquireing, tachievement are so aapprenticeding advantages in the exchange that it has in fact beappear difficult to achieve the acclimateed best, but if you alattainable admissionment juicy couture sale, you would nanytime go for any added casting. Their beside attaccident with adjustment of blooms is the best activitys which a exhausted woman may annual for. The bandage of these tots is in fact able, and they do not aperture out even afterwardss acrid and added acquireing.acclimateed admeaconstantments of Juicy couture battleaccoutrements achieve them applicative to accouterment arbitrary admeaconstantment requirements. Some woman like huge accoutrements while addeds like acclimatized admeaconstantmentd tots. In any case, the cobasicotmentments of these purses are bottomless and admission the acclimateation to acclimatize sanytimeal sbasic activitys. The admirable and dejected bloom abuttals is anadded complete aspect of JC getting. acquire the acclimateed ones for you accordanceing to the accumulating of your accoutermentss, and leave a ambrosial afterwardseffect on addeds. abonfire and acclimateed contrasts are in trend nowacanicule, so accrue yourself up to date by purchasing this air-conditionedb accumulating from Juicy Couture.

  Read the article

• Comparing floating point values

  - by Sauron

  I just read a statement about the floating point value comparison Floating point values shall not be compared using either the == or != operators. Most floating point values have no exact binary representation and have a limited precision. If so what is the best method for comparing two floating point values?

  Read the article

• Point to point linear gradient?

  - by user146780

  I want to make an application that can generate point to point gradient (like Photoshop does). I'm familiar with how to generate an up to down gradient but not point to point. How is this conceptually done. Thanks

  Read the article

• Setting up a wireless access point with Ubuntu server

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server, everything "seems" to be good since I got a better wifi radio (long story). But now I am a little confused, when my Android phone tries to associate with the AP it is able to with no problem but then it cannot get an IP address from my DHCP server. I have tried messing with firewall rules, nothing... I tried making a bridge interface as per what I am told I had to do. ( Not sure if i did it right though). What I am trying to do if make the wireless interface an extention of my eth0 network. Am I on the right track or am I going about the wrong way?

  Read the article

• wireless network with cable modem and access point

  - by hayri

  I have a Scientific Atlanta EPC2203 cable modem and a TP-Link TL-WA500G access point. When I connect my computer directly to modem with a CAT5e cable I have internet connection on my laptop (when i type ipconfig i see my external ip there, provided by isp). So I decided to have wireless network in the flat, allowing other devices to connect as well. I bought this wireless ap (TL-WA500G) configured Wireless security stuff, and connected it to my modem. With that configuration (by default AP has static ip of 192.168.1.254) only my computer can connect to internet over wifi, but not any other device. When I set the IP of AP to Dynamic IP (DHCP) it is the same. How should I change my configuration to enable all wifi devices to connect to internet?

  Read the article

• Wireless Access Point stopped working

  - by Alex Pritchard

  I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

  Read the article

• C++ fixed point library?

  - by uj2

  I am looking for a free C++ fixed point library (Mainly for use with embedded devices, not for arbitrary precision math). Basically, the requirements are: No unnecessary runtime overhead: whatever can be done at compile time, should be done at compile time. Ability to transparently switch code between fixed and floating point, with no inherent overhead. Fixed point math functions. There's no much point using fixed point if you need to cast back and forth in order to take a square root. Small footprint. Any suggestions?

  Read the article

• How to switch users in a smooth way in a Point-Of-Sale system?

  - by Sanoj

  I am designing a Point-Of-Sale system for a small shop. The shop just have one Point-Of-Sale but often they are one to three users (sellers) in the shop. Each user have their own user account in the system so they login and logout very often. How should I design the login/logout system in a good way? For the moment the users don't use passwords, because it takes so long time to type the password each time they login. The Platform is Windows Vista but I would like to support Windows 7 too. We use Active Directory on the Network. The system is developed in Java/Swing for the moment, but I'm thinking about to change to C#.NET/WPF. I am thinking about an SmartCard solution, but I don't know if that fits my situation. It would be more secure (which I like) but I don't know if it will be easy to implement and smooth to use, i.e. can I have the POS-system running in the background or started very quickly when the users switch? Are SmartCard solutions very expensive? (My customers are small shops) Is it preferred to use .NET or Java in a SmartCard solution? What other solutions do I have other than passwords/no passwords/smartcards? How should I design the login/logout system in a good way? Is there any good solution using SmartCards for this purpose? I would like suggested solutions both for C#.NET/WPF and Java/Swing platforms. I would like suggested solutions both for Active Directory solutions and solutions that only use one user profile in Windows. How is this problem solved in similar products? I have only seen password-solutions, but they are clumsy.

  Read the article

• How to blacklist a problem Wi-Fi access point by MAC address in Mac OS X

  - by Sam Alexander

  So I am a small Mac-user cog in a larger Windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wi-Fi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my AirPort on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

  Read the article

• How to blacklist a problem wifi access point by MAC address in OSX

  - by Sam Alexander

  So I am a small mac-user cog in a larger windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wifi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my Airport on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

  Read the article

• Macs don't connect to wifi access point but PCs will

  - by Josh

  So, as a side project I'm going to try and figure out why the wifi APs in my building exhibit the following behavior: - They typically allow all types of computers to connect without issues - Sometimes Apples can't get an IP address but will still connect to the AP's signal - Less often, PCs can't connect to the wifi (same as above - yes signal, no IP addy) - Don't let Raiders fans on no matter the time of day! My first thought was that the DHCP leases were all taken up when the Apples would try to connect, and it was just their unlucky timing, but I would then try to log on with a PC that had a new, unleased MAC address and it would work... Could this be something to do with interoperability between an apple wifi card, and the APs? Different parts of the DHCP lease being taken up first? The fact that the Seattle Mariners might actually be good this year?? If this hasn't used up everyone's patience (with my crappy sports jokes), something else I could use some help with: - We don't have the model or type of AP - This is because there is no documentation available for them, and they literally look like small white boxes with no writing on them. Also, the company that installed them is out of business, so the situation might be that no docs will ever be on the way. -- Do you guys have any ideas on how to figure out what we have? Thanks as always for all the help, and I'm looking forward to the day when I know enough to start contributing back to the site, Josh

  Read the article

• Games consoles won't connect through the TP-Link TL-WA500G Access Point

  - by Manfred Wolff

  I hope that someone can help me. I have several Laptops and other devices, all using my Wireless Router (Sky Digital Netgear) To extend the range to the back of the house, I purchased a TP-Link TL-WA500G Range extender. configured just as a pure repeater, it picks up the signal from the Netgear Router. The Netgear Router does the DHCP, handing out the IP addresses. This all works a treat with several different laptops and my iPone4S, but when my son tries to use his XBox360, Sony Playstation3 or the Nintendo Wii those devices fail to acquire an IP address. They just sit their waiting for the IP config. This also happens with my wife's HTC desire ONE Android phone. My son says that, when his HTC Desire C won't get an IP address, he just unplugs the AP briefly - the phone will connect and he puts the AP back on. Once he is connected to the Router, the AP won't disturb function. The Games Consoles don't seem to work like that. They stop working, when the AP is reconnected. I had my son try to configure permanent IP addresses, and he said that did not work either, though I have to confirm that, as I did not see that for myself. Has anybody seen this before? I have searched the Net and have not found any similar problems anywhere. I wonder if there is setting somewhere that would fix this. Many thanks for anyone reading this and trying to help. M

  Read the article

• User for Public Network

  - by user71604

  my computer can catch the signal for many Access Points for the same network, while the network has problem with internet connection in some APs and it's working in others "all APs have the same SSID" Please advice if as i user i can force my computer to connect with specific AP neither than to go with the one with higher power (through MAC adress or IP)?. I am sure that my computer catch more than 10 signals for APs"All with same SSID". I am using windows 7 home primume 64 bit. as a user i dont have access to the AP config.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >