Search Results

Search found 690 results on 28 pages for 'routers'.

Page 2/28 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Configuring network route between two routers on home network

    - by Paul
    I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

    Read the article

  • DNS Piority in home-use Routers

    - by DucDigital
    Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

    Read the article

  • DNS Piority in home-use Routers

    - by DucDigital
    Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

    Read the article

  • connecting two routers

    - by lee
    I have two routers, both wireless, that i wish to connect together. As it stands Router A is connected via a micro filter into the phone line which i access the web wirelessly. What I want to achieve is to connect Router B to A so I can hardwire My TV and Sky (cable) Box into B and simultaneously browse the web wirelessly via router A. Is this possible? If so I'd appreciate the help on this one to save me running 50ft cable under the carpet!!! PS I'm using Mac OS.

    Read the article

  • Any consumer routers with Outgoing VPN support?

    - by Brian Lacy
    When I'm working at home, I need to be able to connect to three different outgoing VPNs, two of which happen to use the same internal IP addressing schemes (192.168.0.*). I also need a static address for my VirtualBox VM so I can connect to my testing web server. Are there any routers which will allow me to connect to multiple outgoing VPNs and assign different internal IP addresses through NAT? Is such a thing even possible, or are there alternate solutions available? Thanks!

    Read the article

  • Two routers network routing settings

    - by xiamx
    I have two routers, Router A is connected to the internet, and Router B is connected to the LAN port of Router A. Router A: 192.168.1.1 Subnet 255.255.255.0 Router B: IP leased from router A: 192.168.1.2 gateway 192.168.0.1 subnet 255.255.255.0 I have a machine C plugged to router A with ip 192.168.1.3 also a machine D plugged to router B with ip 192.168.0.199 I want to access machine D from a machine C. What settings do I need to change to do that?

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • Connected 2 routers, but they won't talk

    - by ekolis
    I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

    Read the article

  • 2 routers, both DHCP, no IP assigned

    - by piobyz
    I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

    Read the article

  • Cisco 2900 Series Routers worth the price?

    - by NickToyota
    Just wondering if anyone has experience with the cisco 2911 or 2900 series routers? I understand it is newer and similar to the 2811 but more robust. The price difference is not that much more. I am curious as to why. I am trying to determine if I should go with the 29xx or 28xx series for a medium sized company. ISP load balancing and fail over is required. T1 and ADSL lines already in place.

    Read the article

  • Bridge 2 routers

    - by Nathan Adams
    I have 2 Linksys WRT54GL routers flashed with DD-WRT. On each I have a different ISP, and thus a different private network. I would like to be able to talk to either network regardless of what network I am on. Example: ISP1 - Router1 - Client ISP2 - Router2 - Client What I would like to do is something like: ISP1 - Router1 - Client              ^              |              v ISP2 - Router2 - Client This would be ideally because then I don't need to introduce another device in the mix, unless I have to. But I guess the first question is - is this even possible?

    Read the article

  • Two routers on the same network

    - by qroberts
    My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

    Read the article

  • Problem linking two Cisco routers with a static route

    - by Chris Kaczor
    I'm trying to link two Cisco routers with a static route and I haven't been able to get it working as expected. Here is the basic setup: Router 1 - WRV210 - 192.168.1.1 - connected to cable modem Router 2 - RV120W - 192.168.2.1 I already have several machines on Router 1 that are working and I want to setup Router 2 with a few other machines on the different subnet. Here is what I've configured: Connected the WAN port on Router 2 to a LAN port on Router 1 Configured Router 1 to give 192.168.1.2 to Router 2 via DHCP Configured Router 1 with a static route (192.168.2.0 mask 255.255.255.0) to 192.168.1.2 using the LAN & Wireless interface Disabled the firewall on Router 2 (since it is covered by Router 1) Configured Router 2 to "Router" mode instead of "NAT" mode Configured Router 2 with a static route (192.168.1.0 mask 255.255.255.0) to 192.168.1.1 using the WAN interface From the research I've done I think that should be enough but things aren't working exactly as expected: Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) A machine on Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) A machine on Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) Router 1 and a machine on Router 1 can ping 192.168.1.2 (Router 2 itself) I'm confused as to why Router 1 cannot talk to the 192.168.2.0/255.255.255.0 subnet. Any help would be greatly appreciated.

    Read the article

  • Sharing files between 2 different routers

    - by Chris
    I realize this has been asked before and I have read as much as I could find on the topic but I still need help with this because there are so many different approaches and the ones I am trying aren't working. So I have 2 routers, lets call them A and B. Both have a wireless feature and are active. A is in the basement and receives the internet. There is a TV on the ground floor that is connected to A through an ethernet wire. B is upstairs and gets the internet from A through an ethernet wire. Connected to B, is a desktop running Plex Media Server. What I want to do is make sure devices connected to both routes can access the Plex Media Server. So what I have read is that I should plug in the ethernet wire connecting B to a into a LAN port instead of the WAN port. After that I should turn off DHCP. I have tried this and B stops receiving internet. What am I doing wrong? Another thing I have read is to use Router B in bridge mode but Router B is running openwrt and I have QoS on it so gaming/VoIP/browsing is unaffected by heavy downloading/uploading. I would prefer to keep this active. I realize it might be ineffective if a device in Router A is doing some hardcore downloading but all that stuff is done on Router B anyway so it doesn't matter. Router A can't get openwrt because it is a shitty one provided by Bell. So, how do I proceed with this?

    Read the article

  • Privacy, VPN and routers

    - by user123189
    Ever since this ACTA push-up the things are starting to heat up around torrents and privacy. I am using Tribler now, but this is not secure enough for me. Not enough privacy. I've been using in the past a swedish VPN PPTP connection. What I observed is that, when the VPN connection was down, Internet traffic wasn't cut off, rather the downloads were continuing, this time with my real IP, wearing off my protection. 1st : How to enforce a VPN connection that will cut all traffic when down? That is, the moment the connection is down, all internet traffic should cease as if I'd pull the network plug out. 2nd: Is PPTP good enough or should I ask for SSTP or IKEV2 ? 3rd: Should I disable IPv6 ? Is VPN no longer private if I keep IPv6 active? I 'heard some stuff' about dual vpn routers to be able to improve privacy; but nothing more about how to configure one for such a task. 4th: Is there any kind of "black box" hardware equipment that can be used in hiding IP, encrypting traffic and so on ?

    Read the article

  • pfSense routing between two routers with shared network

    - by JohnCC
    I have a network set-up using two pfSense routers arranged like this:- DMZ1 WAN1 WAN2 DMZ2 | | | | | | | | \___ PF1 PF2___/ | | | | \___TRUSTED___/ Each pfSense router has its own separate WAN connection, and a separate DMZ network attached to it. They share a common TRUSTED LAN between them. The machines on the trusted network have PF1 as their default gateway. PF1 has a static route defined to DMZ2 via PF2, and PF2 has a static route to DMZ1 via PF1. There is NAT to the WAN but internal networks (DMZ1/2 and TRUSTED) use different RFC1918 subnets. I inherited this arrangement, and all used to work fine. I made a config change to PF1 (relating to multicast), and machines on DMZ2 suddenly could not talk to TRUSTED. I rolled the change back, but the problem persisted. What I guess you'd hope would happen is that TCP packets would go DMZ2 - PF2 - TRUSTED and on return TRUSTED - PF1 - PF2 - DMZ2. That's the only way I can see it would have worked. However, PF1 drops the returning packets. I've verified this using tcpdump. I've worked around this by adding static routes to DMZ2 via PF2 to the servers on TRUSTED, but some devices on there do not support static routes so this is not ideal. Is there way to make this arrangement work decently, or is the design inherently flawed? Thanks!

    Read the article

  • Timout dead connections to Digi PortServer TS16

    - by MT
    We are using Digi portservers for console management of our routers. Basically users telnet to the Digis on ports 2001-2016 (corresponding to the physical serial port they want to connect to). Does anyone know if there is a way to cause the digi to close/release a user's connection after an period of idle time and if possible, where that time can be specified?

    Read the article

  • x86 Router Benchmarks?

    - by Kevin
    I have grow to prefer x86 based router OS's like Vyatta and pfSense over their competitors Cisco and Juniper (Well, I never really used Juniper, but still.). However, they feel "fake" to me, like "Frankenstein" routers. I think my greatest worry is that I am missing out on something by not using the main contenders. Are there any benchmarks out there that compare the main metrics (throuput, etc.) of x86 router operating systems to their proprietary counterparts?

    Read the article

  • How do the routers communicate with each other ?

    - by Berkay
    Let's say that i want make a request a to a web page which is hosted in Europe (i live in USA).My packets only consist the IP address of the web page, first the domain name to ip address transformation is done, then my packets start their journey through to europe. i assume that MAC addresses never used in this situation? are they? First, my packets deal with many routers on way how these routers communicate with each other?, are router addresses added to my packet headers ? Second, is there a specific path router to router comminication or which conditions affect this route? Third to cross the Atlantic Ocean, are cables used or... ?

    Read the article

  • Software Router: pfSense or Vyatta ?

    - by Kedare
    Hello, I'm rebuilding my home network and I am look to an alternative to the very expensives Cisco. So I take a lookt at the software routers, I've found Vyatta and pfSense. I have tested both and I find both great, but I don't know which one to choose. I need a router software that : Supports IPv6 (both do with pfSense 2 RC1) Allows me to join an OpenVPN Network Is free Configurable by CLI (WebGUI is a plus) After some testing, it looks like both a very featured, but Vyatta looks more CLI-centric where pfSense looks more WebGUI-centric. Which do you recommend me ? Why ? Is there any limitations on the free version of Vyatta ? I would like to run it on a small box like Soekris ones, it that possible ? (pfSense will run it, but I'm not sure with Vyatta) Thank you

    Read the article

  • No internet connection using Edimax routers

    - by idan315
    I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. I am really lost on how to approach this problem. Possible leads: when I view the network information, I see that my computer is connected to 'Multiple Networks'. One of those is "Network 4" (probably my router), and the other is Unidentified network. I don't know how to make the "Unidentified Network" disappear, or why is it even there in the first place. When I try using "ipconfig", I have two default gateway IPs. The first is 0.0.0.0, and the second is the IP of my router (192.168.2.1). The first router was Edimax BR-6204Wg. The second one I've tried connecting is BR-6424n. Any ideas?

    Read the article

  • Show both routers SSID with Wireless bridge [closed]

    - by Valter Henrique
    I have two router 'GVT-1' (the main router) and 'GVT-2' (the second router), this seconds router is used as a repeater only, so I setup a wireless bridge but after I did that it only show 'GVT-2' and if I go closer the 'GVT-1' the signal gets weak cause I'm far from the second router. What I wish is to had the same connection with a wide signal, there's something that I cand do about it ? Thanks.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >