Search Results

Search found 690 results on 28 pages for 'routers'.

Page 3/28 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • Cloudstack virtual machines can't communicate with virtual routers when they are on different hosts

    - by Jorge Suárez de Lis
    I'm using Cloudstack 2.2.14 on a Ubuntu 10.04 set of hosts, and I have a problem on my setup. I have two hosts running. When a virtual router is created on host 1 and a virtual machine using that virtual router is created on host 2, or vice versa, I have no connectivity at all on the virtual machine. First of all, I have to setup the network manually on that virtual machine -usually DHCP is working, but not here-. Then, I can't ping to the virtual router from the virtual machine or vice versa. When both virtual router and virtual machine are created on the same host, everything works! Maybe those packages are being filtered somehow? I have no clue on how to proceed. Both hosts can communicate directly outside the virtualization.

    Read the article

  • Network - Routers conflicting in my subnet

    - by Richard
    I have a router whose IP is 192.168.1.1 and I be experiencing conflict with another router on my subnet (which probably has 192.168.1.1 as IP too). I think when it tries to connect to the network, eventually taking the place of my router because when I try to access the config page of my router, which appears to me is a config page from another router that is not mine. Do you have any solution except to change the IP of my router to an IP not common? As I have set up the exclusivity that only my IP router? I work with dynamic IPs (wireless networking) and static (for wired). How do I? I just wanna to do some setting in my router that affects all other, so that doesn't conflicts anymore.

    Read the article

  • What decent small-office level routers are there

    - by Glenn Slaven
    So let's say I have a network of less than 20 computers including a server that needs to be accessed externally. What router/firewall solutions would you recommend? It can be either hardware or software and would need to be able to do NAT Firewall DMZ Native VPN if possible Some form of network bandwidth monitoring Update: I've accepted the answer I liked but this question probably doesn't have a definitive answer, it would depend on your requirements. Please leave more suggestions with an explanation as to why it works well in your situation.

    Read the article

  • Usage of two Routers on LAN

    - by brusilva
    I've currently own a Linksys E4200 and a Thomson 546v6. Because I have an IPTV service I must set the Thomson as the main router connected to the phone line so that I can distribute the video signal for 2 specific ports and the other two for LAN Access. The problem is that the Thomson doesn't like port forwards, it usually doesnt work and since I have a good router (linksys) currently only working as Access Point I would like to use it as a router itself. I don't want to do a NAT beyond NAT so my question is should I connect the E4200 and to thomson and set the E4200 as a DMZ machine and then control all trafic on the E4200 itself or is there any other option that could suit my needs better?

    Read the article

  • Are there any routers supporting client-side VPN?

    - by Andreas Hagen
    What I'm asking for is basically what the title says. I need a router that can forward all the data-traffic it receives through a VPN tunnel. Have Google'd a little but I can't seam to find a topic which the links to potential products still are active. The parameters to the specific VPN it is going to be used with is as follows: Sorry it is in Norwegian, but you should be able recognize the relevant parameters like encryption and such.

    Read the article

  • How to connect 2 routers (Asmax and D-link)

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • Recomended home ADSL wireless routers

    - by beakersoft
    I'm going to buy a new ADSL wireles broadband router, but i'm not sure what might be a good one. I want it to have some form of QOS on it, and SNMP support so i can see my port usage over MRGT. I've looked at various models but they all seem to have conflicting reviews, i am looking at something along the lines of the Dlink DSL-2740R but any suggestions would be much apreciated

    Read the article

  • Routers with USB plug to connect external storage

    - by sixtyfootersdude
    I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

    Read the article

  • SSH to remote host (edgemarc 4200 or 4500 series routers) and pull arp data

    - by MaQleod
    I've been trying to think of a method to do this for days, but have not come up with anything yet. Ideally, this is what I'm looking to do: From a windows XP machine, I need to open an SSH connection to a remote host, send the arp command, and pull the text results of the command back for use on the client. I will need to parse this data and preferably produce a 2D array of IPs and MAC addresses. There will be no shared keys, this is all done with a username and password that will always be different, they will need to be fed into the command via variables that will be pulled from a database using an autoit script based on the WAN ip of the remote host. Now the actual parsing of the data and creation of the array will be easy if I can just get the text of the arp table. Is there any way to ssh to a remote host, run a command and return the data from that command to the client in a batch script or perl script (it is ok if it writes the text to a file, I can read it out of the file later, I just need it to get to the client)?

    Read the article

  • Find routers IP address on the other side

    - by corsiKa
    Here's the basic setup of my network In this diagram: 1: The internet c: cable 2: Wireless router w: wireless connection 3: A win7 box with internet connection sharing enabled 4: A wireless router, but I'm only using its LAN capabilities to connect box 5 to the internet. 5: A win7 box, the computer I'm using to make this post. So its internet works just fine. Now if I'm on box 5, and I ping 192.168.1.1, I hit 4. If I'm on box 3 and I ping 192.168.1.1, I hit 2. Now obviously box 3 does not think 4's IP address is 192.168.1.1, or I wouldn't be able to connect to the internet. Okay, now that you know as much as I do about my network, here's my question: If I was on box 3, how would I determine the IP address of 4? Basically I'm running a webserver on box 5 and want to access this webserver on box 3 and other boxes. So that's the end goal. If there's other information there that can help, I'd appreciate it. Thanks!

    Read the article

  • Why does my webpage look different when I connect using different routers?! Does routers cache files?

    - by Ayyash
    Here is the case, I am working on a site from office and home, I recently updated the stylesheets and logged in the live site from office (using my same laptop I use all the time), and everything looks okay, I come home use my home internet connection to connect to the site using the SAME laptop, the styles are not updated! The thing is: this happens on ALL browsers, and after emptying the cache many times, and even after one month of work, and even if I have never opened the site before on that browser (as if my router has a cache of its own) Another thing: only one particular styles.css file seem to be hanging Extra info: I use the same IP for my home wireless router as that defined in the office, the usual 192.168.0.1

    Read the article

  • Alternative routers to the Cisco SA 500

    - by Justin
    We are evaluating the Cisco SA 500 router for our new office router. Would anyone recommend another similarly-featured router from another manufacturer? Requirements: - Office of 14 people - We are likely to switch to 14 VOIP phones (Linksys SPA-942) soon - We want to use VPN on the router, if possible, with Windows and Mac users

    Read the article

  • Preventing endless forwarding with two routers

    - by jarmund
    The network in quesiton looks basically like this: /----Inet1 / H1---[111.0/24]---GW1---[99.0/24] \----GW2-----Inet2 Device explaination H1: Host with IP 192.168.111.47 GW1: Linux box with IPs 192.168.111.1 and 192.168.99.2, as well as its own route to the internet. GW2: Generic wireless router with IP 192.168.99.1 and its own route to the internet. Inet1 & Inet2: Two possible routes to the internet In short: H has more than one possible route to the internet. H is supposed to only access the internet via GW2 when that link is up, so GW1 has some policy based routing special just for H1: ip rule add from 192.168.111.47 table 991 ip route add default via 192.168.99.1 table 991 While this works as long as GW2 has a direct link to the internet, the problem occurs when that link is down. What then happens is that GW2 forwards the packet back to GW1, which again forwards back to GW2, creating an endless loop of TCP-pingpong. The preferred result would be that the packet was just dropped. Is there something that can be done with iptables on GW1 to prevent this? Basically, an iptables-friendly version of "If packet comes from GW2, but originated from H1, drop it" Note1: It is preferable not to change anything on GW2. Note2: H1 needs to be able to talk to both GW1 and GW2, and vice versa, but only GW2 should lead to the internet TLDR; H1 should only be allowed internet access via GW2, but still needs to be able to talk to both GW1 and GW2. EDIT: The interfaces for GW1 are br0.105 for the '99' network, and br0.111 for the '111' network. The sollution may or may not be obnoxiously simple, but i have not been able to produce the proper iptables syntax myself, so help would be most appreciated. PS: This is a follow-up question from this question

    Read the article

  • Two routers in a LAN

    - by taxi
    router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

    Read the article

  • What is the point of connecting two routers directly together

    - by rubixibuc
    The way subnets work, wouldn't connecting two router interfaces together require their own subnet between them. Unless that subnet mask has 31 bits, wouldn't that was adress space. I'm asking because I often seen that done in networking books. How can this be done without wasting IP Addresses? They usually draw this when explaining subnetting. They have a central router connected to several other each one supposed to be creating their own subnet. Is this really how subnettimg is done? Example <-------[Router 1]-----Wasteful Subnet-------[Router 2]------> | | | \/

    Read the article

  • Indy FTP, large files and NAT routers

    - by Lobuno
    Hello! I have been using Indy to transfers files via FTP for years now but have not been able to find a satisfactory solution for the following problem. When a user is uploading a large file, behind a router, sometimes the following happens: the file is uploaded OK, but under the mean time the command channel gets disconnected because of a timeout. Normally this doesn't happens with a direct connection to the server, because the server "knows" that a transfer is being taking place on the data channel. Some routers are not aware of this, though and the command channel is closed. Many programs send a NOOP command periodically to keep the command channel alive even if this is not part of the standard FTP specification. My question: how do I do that? Do I send the NOOP command in the OnWork event? Does this cause any collateral damage in some way, like, do I need to process some response? How do I best solve this problem?

    Read the article

  • Setting up Lan within a Lan

    - by nageeb
    How unreasonable would it be to setup a small LAN within an existing LAN? I'm setting up a series of video surveillance servers and a number of IP cameras in a client's location and cannot have my equipment on the same network as their local machines. My network is essentially self-contained and the only device that anyone needs to access is a web-app on one of the machines. Basically I'm thinking of installing a SOHO router which would uplink to their LAN, and then set up some NAT rules on both their router and my router, to allow outside access to the webserver. Is there anything fundamental that i'm missing which would prevent this from working?

    Read the article

  • Need reasonably priced router with QoS support [closed]

    - by ULTRA_POROV
    I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

    Read the article

  • Troubleshooting wireless client-bridged networks between two DD-WRT routers?

    - by KronoS
    I recently purchased a Buffalo N600 wireless router which came with DD-WRT pre-installed. I want to take my old wireless router a Linksys WRT54GL, also with DD-WRT pre-installed, and use it as a wireless bridge for my HTPC and Blu-Ray Player in the other room. I other words, I'm trying to connect to WIRED networks via the wireless on the routers. I followed eactly the instruction from DD-WRT's manual for 'Client Bridged' however I'm still not able to connect to two routers correctly, when the encryption is enabled (WPA2-Personal Mixed) however I am able to connect the two routers when there is NO encryption. I've checked, double checked, and triple checked that EVERYTHING is the same on BOTH routers: Routers 1 & 2 Encryption: WPA2-Personal Mixed Wireless Mode: G-Only Wireless Channel: 6 Subnet Mask: 255.255.255.0 Subnet: 192.168.1.0/254 SSID: Krono$ Primary Router #1 (Buffalo N600) IP Address: 192.168.1.1 Firewall: Enables w/ defaults DCHP: Enabled as DHCP Server Secondary Router #2 (Linksys WRT54GL) IP Address: 192.168.1.2 Firewall: Disabled as per DD-WRT instructions I'm looking for any configurations that I may have missed, or settings that may need to happen in order for this work.

    Read the article

  • How to prevent asymmetric routing with multiple eBGP routers?

    - by Andy Shinn
    I have 2 routers announcing a /22 subnet to different providers (one providers connects to each of the 2 routers). I have split the /22 in two /23 to announce one /23 on each of the routers plus the /22 (the providers will take the more specific route). This allows me to fail over and keep traffic inside the /23 in and out the same provider. What are other ways in which I could announce just the /22 with both routers and have packets from servers on the network behind the routers go back out the same router in which they came in from? EDIT: The main problem I come across, which end users and clients complain about the most, is that the least hop route is sometimes not the "optimal" route. In my case, I know that Provider B may have better latency to X nation. But when packets come in from provider B, they may go out Provider A or provider B. The reverse is also true. If I send a packet to X nation out provider A, even though it may have more hops back, the packet will likely come in from Provider B (which may have higher latency, packet loss, etc. to this nation)

    Read the article

  • c# peer-to-peer networking - getting around routers

    - by The.Anti.9
    I want to code a peer-to-peer like chat program in C#. I am trying to figure out how the networking would work. I know that the concept is that each peer is a client and a server at the same time. It can connect and be connected to. But my question is, how do you connect to a computer behind a router without the port being forwarded to that computer? I know things like Bittorrent do this with no problem. I was planning on using a tracker to keep a list of peers and the ports they listen on, but I still don't understand how to get through the router issue. Could someone please explain?

    Read the article

  • Secure Your Wireless Router: 8 Things You Can Do Right Now

    - by Chris Hoffman
    A security researcher recently discovered a backdoor in many D-Link routers, allowing anyone to access the router without knowing the username or password. This isn’t the first router security issue and won’t be the last. To protect yourself, you should ensure that your router is configured securely. This is about more than just enabling Wi-Fi encryption and not hosting an open Wi-Fi network. Disable Remote Access Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world. Even if you set a username and password, if you have a D-Link router affected by this vulnerability, anyone would be able to log in without any credentials. If you have remote access disabled, you’d be safe from people remotely accessing your router and tampering with it. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check. Update the Firmware Like our operating systems, web browsers, and every other piece of software we use, router software isn’t perfect. The router’s firmware — essentially the software running on the router — may have security flaws. Router manufacturers may release firmware updates that fix such security holes, although they quickly discontinue support for most routers and move on to the next models. Unfortunately, most routers don’t have an auto-update feature like Windows and our web browsers do — you have to check your router manufacturer’s website for a firmware update and install it manually via the router’s web interface. Check to be sure your router has the latest available firmware installed. Change Default Login Credentials Many routers have default login credentials that are fairly obvious, such as the password “admin”. If someone gained access to your router’s web interface through some sort of vulnerability or just by logging onto your Wi-Fi network, it would be easy to log in and tamper with the router’s settings. To avoid this, change the router’s password to a non-default password that an attacker couldn’t easily guess. Some routers even allow you to change the username you use to log into your router. Lock Down Wi-Fi Access If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous. To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”. Disable UPnP A variety of UPnP flaws have been found in consumer routers. Tens of millions of consumer routers respond to UPnP requests from the Internet, allowing attackers on the Internet to remotely configure your router. Flash applets in your browser could use UPnP to open ports, making your computer more vulnerable. UPnP is fairly insecure for a variety of reasons. To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP. Log Out of the Router’s Web Interface When You’re Done Configuring It Cross site scripting (XSS) flaws have been found in some routers. A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access. Even if you changed your router’s password, it would be theoretically possible for a website to use your logged-in session to access your router and modify its settings. To prevent this, just log out of your router when you’re done configuring it — if you can’t do that, you may want to clear your browser cookies. This isn’t something to be too paranoid about, but logging out of your router when you’re done using it is a quick and easy thing to do. Change the Router’s Local IP Address If you’re really paranoid, you may be able to change your router’s local IP address. For example, if its default address is 192.168.0.1, you could change it to 192.168.0.150. If the router itself were vulnerable and some sort of malicious script in your web browser attempted to exploit a cross site scripting vulnerability, accessing known-vulnerable routers at their local IP address and tampering with them, the attack would fail. This step isn’t completely necessary, especially since it wouldn’t protect against local attackers — if someone were on your network or software was running on your PC, they’d be able to determine your router’s IP address and connect to it. Install Third-Party Firmwares If you’re really worried about security, you could also install a third-party firmware such as DD-WRT or OpenWRT. You won’t find obscure back doors added by the router’s manufacturer in these alternative firmwares. Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions. Image Credit: Nuscreen on Flickr     

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >