Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 20/567 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Clone drive in Windows

    - by ERJ
    I have two 2 TB external USB hard drives, call them HD1 and HD2. HD1 is USB 2, HD2 is USB 3. Each drive contains exactly one NTFS partition. I want to clone HD1 to HD2, because it's newer and much, much faster. What's the best way to do this? I don't want to do a copy-and-paste, I want to clone the whole partition. The new drive is actually a few bytes larger, so this should be possible? I don't have a second drive that can hold the image, so it would have to clone directly to the other disk (not to a file). How can I accomplish this on Windows 7? I know about Clonezilla but I would prefer not to have to boot from a CD or anything, as I don't have the capability to do that right now. I want to know if there's a way to do this while running Windows.

    Read the article

  • Running Ubuntu off a USB drive?

    - by Solignis
    I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

    Read the article

  • USB flash drive showing empty but half of the capacity is in Used

    - by tamakisquare
    Not sure if I should post my question in superuser, but it looks like the most appropriate place among all StackExchange sites. I have a 16GB Kingston DataTraveler USB drive. When I tried to use it this morning, it showed up nothing in there but yet its details showed that half of the capacity was in used. I tried it with OS X, Ubuntu, and Windows 7 and the results were the same. I tried to create a new folder and it worked. Apparently, the drive is working but somehow not showing my previously stored data. Note that I was still using the drive last night and there wasn't any problems. Following @rob's suggestion, du -h gave me: 16K ./.Trashes 960K ./.Spotlight-V100/Store-V1/Stores/2620683B-A38B-42F4-A247-45CAF4826ADE 976K ./.Spotlight-V100/Store-V1/Stores 1008K ./.Spotlight-V100/Store-V1 1.0M ./.Spotlight-V100 1.1M And, df -h gave me: /dev/sdb1 15G 7.9G 7.1G 53% /media/KINGSTON Confirming what I reported. Anyone got a clue/answer to this issue? Thanks.

    Read the article

  • How to un-partition a drive on windows 7

    - by Michael Rentmeister
    I bought this laptop used from a friend. The laptop has 500gb of storage; however, the drive is partioned. The C: drive has an allocated space of 50gb whereas the partition has 396gb allocated to it. How do i either take some of the space from the partition and move it to the C: drive, or get rid of the partition? I've done some searching and people say I'm supposed to be able to use "Disc Management" to "delete volume," but when i right click on the partition the "delete volume" is not enabled. Here is a picture:

    Read the article

  • Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart"

    - by Senthil
    Problem: When I switch on my PC, after BIOS POST, a cursor is blinking for about 5 seconds and then I am getting this error message: A disk read error occurred. Press Ctrl + Alt + Del to restart. I am able to go into BIOS. But Windows loader doesn't even start. This message is shown after my motherboard logo comes and goes. Symptoms: I DID notice my system freezing for minutes at a time for past two days. Also, in the past two days, it stopped half way through the Window booting process. I had to do hard reset couple of times to get it working. But since today morning, I only get this error message. Configuration: Operating System: Windows 7 Ultimate 32-bit only. Hard disk: 1 Physical Disk - 80GB SATA Partitions: Two (2) - C: and D: File System: NTFS No drive encryption or compression is turned on. After I searched on the net, I have found people mentioning these possible causes: Hard Disk is physically failing Corrupt MBR Bad Sector I am planning to buy a new hard disk, install Windows on it and continue. But I need data from the old hard disk. The data I want is in D: drive, outside any Windows user folder, is not encrypted or compressed or protected in anyway. I think if someone/something can get the disk working again and knows NTFS, the data can be hopefully read. What steps should I follow to recover files from the defective disk? Update: I bought a new disk, installed windows on it and added the defective one as a slave. Then I was able to read the data from the defective hard disk. Though chkdsk found lots of errors, the files I wanted were not affected and I got them back :) I am not using that hard disk anymore though it seems to be working at the moment.

    Read the article

  • Creating a Windows XP installation flash drive in linux

    - by Alex
    How can I create a bootable flash drive to install Windows XP from under Linux? I have Ubuntu installed on my PC and want to install Windows XP parallelly. I already have an NTFS hard drive, so what I need is to install Windows there and make it available through a boot manager. I also have a Windows installation .iso. So how to produce a ready-for-installation USB-stick from this?

    Read the article

  • Why doesn’t windows explorer show my removable / USB drive even though the command prompt does?

    - by Gishu
    I'm running WinXP SP2. Around 50% of the time, when I slot in my USB drive. Windows explorer refuses to show the drive. If I click on the Safely remove hardware icon on the tray, I can see a menu item for the drive - say drive G: (the light on the USB drive is also on) If I type in G: into the address bar of explorer, it says 'Cannot find...' If I type in G: into a command prompt window, it works and I can do a dir to see the list of directories on the drive. To fix this, I've to remove-reinsert the pen-drive. But doing it every day is annoying. Also this happens only on this machine.. I use this drive on my home machine and it works flawlessly each time. Can anyone suggest things that I could try ? Thanks for reading...

    Read the article

  • WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

    - by osgx
    After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB NOT SUPPORTED [Remove Drive] SMART gives me only Device Model and ATA protocol version 1 (not 7-8 as it must be for SATA) What does it mean? Just before reboot, when is was marked only with "Device Error", smart was: Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: WD-WCASJ1130*** Firmware Version: 02.01B01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 7 18:47:35 2010 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 7591 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x000e 193 193 000 Old_age Always - 125 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16615 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1564 193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164824 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 What can be wrong with he? Can it be restored? PS new smart is === START OF INFORMATION SECTION === Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 8 00:29:44 2010 MSK SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Command failed, ata.status=(0x00), ata.command=(0x51), ata.flags=(0x01) Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. PPS There was a rapid grow of " 192 Power-Off_Retract_Count " before dying. The hard was used in raid, with several hards from the same fabric packaging box (close id's). The hard drives were placed identically. Rapid means almost linear grow from 300 to 1700 in 6-7 hours. Maximal temperature was 41C. (thanks to munin's smart monitoring)

    Read the article

  • How to "Un-Eject" a USB Flash drive -- Eject is easy (safely remove hardware), but what about Un-Eje

    - by Jian Lin
    There are times after I eject a USB Flash drive, I want to copy some more files over to the USB Flash drive. In this case, do I always need to unplug the drive and plug it back in? Is there a way to "reconnect" or "un-eject" the drive? To eject, that are two ways: 1) Right Click the drive (say H:) and choose Eject 2) Click "Safely remove hardware" from the icon tool But there seems to be no way to un-eject or reconnect a drive.

    Read the article

  • DVD drive doesn't recognize blank dvds only!!!

    - by Jack
    My dvd-rom works fine because I can play dvds on it, however when the dvd is a blank one the drive refuses to recognize it. So I can't burn dvds anymore because the drive shows up as empty in my disk burning software (dvd flick). Any idea what the problem is and how to solve it? PC: Windows vista home basic, 32 bit

    Read the article

  • Why doesn’t windows explorer show my removable / USB drive even though the command prompt does ?

    - by Gishu
    I'm running WinXP SP2. Around 50% of the time, when I slot in my USB drive. Windows explorer refuses to show the drive. If I click on the Safely remove hardware icon on the tray, I can see a menu item for the drive - say drive G: (the light on the USB drive is also on) If I type in G: into the address bar of explorer, it says 'Cannot find...' If I type in G: into a command prompt window, it works and I can do a dir to see the list of directories on the drive. To fix this, I've to remove-reinsert the pen-drive. But doing it every day is annoying. Also this happens only on this machine.. I use this drive on my home machine and it works flawlessly each time. Can anyone suggest things that I could try ? Thanks for reading...

    Read the article

  • System chooses boot drive seemingly at random

    - by Zurahn
    I have a system with two identical 1TB harddrives, where I image to a backup drive using the dd command. When I boot up, though, despite setting harddrive priority in the BIOS, the system sometimes boots the main drive, sometimes boots the backup. My system dual-boots Xubuntu and Windows XP, if that means anything to you. Any ideas?

    Read the article

  • Drive not able to be added to Storage Spaces

    - by Bram Vanroy
    I am having difficulties trying to create a storage space. I have four Hard Drives in my computer. Samsung 128Gb SSD x2 Caviar Green 2TB Older 320 Gb drive I want to merge the two last ones. The problem is, that the 2TB drive does not show up in the configuration screen.: I formatted both hard drives so that can't be it. Any help is appreciated. Edit: larger view: http://bramvanroy.be/files/images/storagespaces.jpg

    Read the article

  • Burnt SATA Drive

    - by luvieere
    By stupid curiosity, I've connected the FDD power cable to the jumper pins of a SATA drive, and powered on the system. The SATA drive's controller burned out. What now? Can it be replaced, and still be able to read the disc?

    Read the article

  • Why does USB thumb drive screw up boot sequence?

    - by Carl B
    I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

    Read the article

  • Unable to view USB stick/drive contents

    - by Harshit Sachdeva
    So, I plug-in my USB stick, copy a file from the hard drive to the USB stick, and safely remove the USB stick. I then plug out the USB stick. When I plug the USB stick back into the computer again, the previous contents of the USB stick are all gone. It shows an empty drive. I am using Windows XP SP 2 with an 8 GB USB stick from Transcend.

    Read the article

  • Unable to view USB stick/drive contents

    - by Harshit Sachdeva
    So, I plug-in my USB stick, copy a file from the hard drive to the USB stick, and safely remove the USB stick. I then plug out the USB stick. When I plug the USB stick back into the computer again, the previous contents of the USB stick are all gone. It shows an empty drive. I am using Windows XP SP 2 with an 8 GB USB stick from Transcend.

    Read the article

  • Why did my flash drive become "read only" and (how) can I fix it?

    - by Bob
    I have a brand new flash drive (one week old) that has become marked as read only, by Windows, Kubuntu and a bootable partitioner. Why did this happen? Is it fixable? If it is, how can I fix this? The problem Firstly, this drive is new. It's certainly not been used enough to die from normal wear and tear, though I would not discount defective components. The drive itself has somehow become locked in a read only state. Windows' Disk management: Diskpart: Generic Flash Disk USB Device Disk ID: 33FA33FA Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : Yes Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No What really confuses me is Current Read-only State : Yes and Read-only : No. Attempted solutions So far, I've tried: Formatting it in Windows (in Disk management, the format options are greyed out when right clicking). DiskPart Clean (CLEAN - Clear the configuration information, or all information, off the disk.): DISKPART> clean DiskPart has encountered an error: The media is write protected. See the System Event Log for more information. There was nothing in the event log. Windows command line format >format G: Insert new disk for drive G: and press ENTER when ready... The type of the file system is FAT32. Verifying 7740M Cannot format. This volume is write protected. Windows chkdsk: see below for details Kubuntu fsck (through VirtualBox USB passthrough): see below for details Acronis True Image to format, to convert to GPT, to destroy and rebuild MBR, basically anything: failed (could not write to MBR) Details (and a nice story) Background This was a brand new, generic, 8GB flash drive I wanted to create a multiboot flash drive with. It came formatted as FAT32, though oddly a little larger than most 8 GIGAbyte flash drives I've come across. Approximately 127MB was listed as "used" by Windows. I never discovered why. The end usable space was about what I normally expect from a 8GB drive (approx 7.4 GIBIbytes). I had thrown quite a few Linux distros on, along with a copy of Hiren's. They would all boot perfectly. They were put on with YUMI. When I tried to put the Knoppix DVD on, YUMI added an odd video option to its boot comman which caused Knoppix to boot with a black screen on X. ttys 1 through 6 still worked as text only interfaces. A few days later, I took some time to take that odd video option off, making the boot command match the one that comes with Knoppix. On the attempt to boot, Knoppix reported some form of LZMA corruption. Leading up to the current issue I was thinking the Knoppix files may have been corrupted somehow, so I tried reloading it. The drive was nearly full (45MB free), so I deleted a generic ISO that also was not booting. That went fine. I then went through YUMI to 'uninstall' Knoppix, i.e. delete files and remove from the menus. The files went first, then the menus were cleared successfully. However, the free space was stuck at about 700MB, same as it was before removing Knoppix. In the old Knoppix folder, there was a 0 byte file named KNOPPIX that could not be deleted. I tried reinserting the drive to delete this file - without safely removing, if that made a difference (hey, first time for everything). Running the standard Windows chkdsk scan without /r or /f reported errors found. Running with /r just got it stuck. I decided to give fsck a shot, so I loaded up my Kubuntu VM and attached the drive to it with VirtualBox's USB 2.0 passthrough. I umounted it (/dev/sda1) and ran a fsck. There are differences between boot sector and its backup. I chose No action. It told me FATs differ and asked me to select either the first or second FAT. Whichever I selected, I got a notice of Free cluster summary wrong. If I chose Correct, it gave a list of incorrect file names. To try to fix something, at least, I ran it with the -p option. Halfway through fixing the files, the VM froze - I ended its process about ten minutes later. Cause? My next attempt was to use YUMI, again, to rebuild the whole drive. I used YUMI's built in reformat (to FAT32) option and installed a Kubuntu ISO (700MB). The format was successful, however, the extract and copy of Kubuntu (which YUMI uses a 7zip binary for) froze at about 60% done. After waiting for about fifteen minutes (longer than the 3.5GB Knoppix ISO took last time), I pulled the drive out. The drive at this point was already formatted, SYSLINUX already installed, just waiting on the unpacking of an ISO and the modifying of the boot menus. Plugging it back in, it came up as normal - however, any write action would fail. Disk management reported it as read only. On reconnect, it would come up as normal but a write operation would cause it to go read only again. After a few attempts, it started coming up as read only on insertion. Attempts to fix This is when I ran through the attempts listed above, to try and reformat it in case of a faulty format. However the inability to do so even on a bootable disk indicated something more serious is wrong. chkdsk now reports nothing is wrong, and fsck still reports MBR inconsistencies, but now always chooses first FAT automatically after telling me FATs differ. It still does the same Free cluster summary wrong afterwards. I cannot run with -p anymore because it is now marked as read only. It also managed to corrupt my VM's disk somehow on the first attempt (yes, I'm sure I chose sda, which is mapped to a 7.4GB drive - I triple checked). Thank god for snapshots? I'm just about out of ideas. To my inexperienced mind it looks like something in the drive's firmware set it to read only "permanently" somehow - is there any way to reset this? I don't particularly care about keeping data, considering I've reformatted it twice. Also, fixes that keep me in Windows are better; it reduces the risk of me accidentally nuking my main hard drive. Update 1: I pulled apart the drive out of curiosity. As you can see, there are no obvious write protect switches. There is an IC on the other side, ALCOR branded labelled AU6989HL, if that matters. If there appears to be no way to fix this, I'll probably pull out the (glued down) card and put it in a card reader to check if it's the card or the controller that died. Update 2: I've pulled the card off, Windows detects the drive as a card reader now. The contacts on the card don't appear to be used, and there are several rows of holes on the card itself. Putting it into the card reader only detects about 30MB total, RAW. It's probably either the reader incorrectly reporting the card as faulty (as if a real SD card's write protect was switched on) or a bad contact somewhere. If nothing else, I have a spare 8GB Micro SD card now... as soon as I figure out how to format it as 8GB.

    Read the article

  • Small (Micro) 16GB USB flash drive

    - by cust0s
    I'm looking for a small 16GB USB flash drive, that's good looking, will stand the test of time and can be attached to a key ring. I don't want extra software (like that found on the SanDisk Micro Cruzer) and it needs to be compatible with Windows, Mac and Linux. Also, I'd rather pay a bit more than buying a cheap flash drive and then it crapping out on me.

    Read the article

  • HP ProBook 4540s CD/DVD Drive cannot Read Disks

    - by DavidB
    I seem to have a problem with the CD/DVD drive on my HP ProBook 4540s laptop. I cannot get it to read any disks. Normally, I would say that this is a hardware issue, but whenever I put a disk that previously could be read in the drive, it starts to make noise like it is trying to to read the disk but cannot and AnyDVD HD seems to be able to retrieve disk information with some struggle. Any ideas on what the problem could be?

    Read the article

  • Partition table corrupted (USB flash drive)

    - by 13ren
    It's an 8 GB Patriot thumb drive, which I've used extensively with lots of data. Today, it is detected, but all data is gone: (EDIT at least some data is still there, but the partition table is gone) EDIT @Sathya (thanks) here's the relevant output from sudo fdisk -l: Disk /dev/sdc: 8019 MB, 8019509248 bytes 247 heads, 62 sectors/track, 1022 cylinders Units = cylinders of 15314 * 512 = 7840768 bytes Disk /dev/sdc doesn't contain a valid partition table It looks like it is /dev/sdc, with that 8 GB... and no partition table. I tried to mount /dev/sdc (and then dmesg | tail): /media> sudo mount /dev/sdc mytmp mount: wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so /media> dmesg | tail [ 24.300000] sdc: unknown partition table [ 24.320000] sd 2:0:0:0: Attached scsi removable disk sdc [ 24.370000] usb-storage: device scan complete [ 26.870000] EXT2-fs error (device sdc): ext2_check_descriptors: Block bitmap for group 1 not in group (block 0)! [ 26.870000] EXT2-fs: group descriptors corrupted! [ 50.420000] unhashed dentry being revalidated: .DCOPserver_eeepc-brendanma__0 [ 50.430000] unhashed dentry being revalidated: .DCOPserver_eeepc-brendanma__0 [ 50.430000] unhashed dentry being revalidated: .DCOPserver_eeepc-brendanma__0 [ 5565.470000] EXT2-fs error (device sdc): ext2_check_descriptors: Block bitmap for group 1 not in group (block 0)! [ 5565.470000] EXT2-fs: group descriptors corrupted! EDIT @Col: results from testdisk Disk /dev/sdc - 8013 MB / 7642 MiB - CHS 1022 247 62 Current partition structure: Partition Start End Size in sectors Partition sector doesn't have the endmark 0xAA55 After I hit [proceed], it says: Structure: Ok. Keys A: add partition, L: load backup, Enter: to continue The "Structure: Ok." seems reassuring... will "A: add partition" make my old data accessible (if it's still there), or will it make a new, fresh partition? Another option is "[ MBR Code ] Write TestDisk MBR code to first sector" - would it be better to do this? EDIT I found that at least some of my data is still on the flash drive, by using the below, and searching for English text in less (like " the "): cat /dev/sde | tr -cd '\11\12\40\1540-\176' | less (The drive changed from "/dev/sdb" to "/dev/sde" because I connected some extra drives today). I've learnt that "/dev/sde1" would be the first partition; and "/dev/sde" is the whole drive. Because unix treats these devices just like files, you can use all the ordinary unix file commands on them, like cat, and then process them like any other stream of data. The tr above removes non-printable characters ("\40" is space, which I wanted to preserve). In less, you can use "/" to search, similar to Vim. How can I get my data back (assuming it's still there)? If only the partition table is corrupted, is there a standard "partition recovery tool"? Is there a way to "repartition" without deleting everything?

    Read the article

  • Boot failure randomly. Can someone help?

    - by desgua
    I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >