Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 20/356 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Nvidia RAID 1 Problem. Degraded drives...

    - by Vedat Kursun
    I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

    Read the article

  • Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

    - by th3m3s
    I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

    Read the article

  • NAS device claims drive in a RAID is degraded but S.M.A.R.T. says it is fine

    - by Nathan Villaescusa
    I have a Synology DS213 with two 600GB drives in RAID 1. Last night the device reported that my second drive had become degraded and that I should replace it. When I ran a extensive S.M.A.R.T. test the results said that the drive is okay. How can I confirm that the drive is actually bad? Is there any case that the degraded drive is the good one and that it is actually the other drive that is bad?

    Read the article

  • RAID 5 configuration and future expansion

    - by Alexis Hirst
    hi, I am building a PC to act as a file server among other things, and I was wondering whether it is a good idea to create 2 partitions on the RAID 5 array, one for OS one for data, or to have a separate disk for OS and use array for data. Also, one day i may want to add another disk to the array, so would there be any issues if I had the OS partition on the RAID5 array when it came to resizing the data partition?

    Read the article

  • Is RAID 5 or SnapRAID the better alternative for a media server raid system?

    - by rubo77
    I am using a raid 5 system for my ubuntu 12.04 xmbc media server with 5 disks. Since the data isn't changing a lot and a total loss wouldn't be so bad, cause I have another backup anyway I am thinking about using SnapRAID It sais: SnapRAID is mainly targeted for a home media center, where you have a lot of big files that rarely change The main advantage for me would be power-saving, cause not all disks have to run all the time. Would you recomment using this? (with a regular resync script once a day)

    Read the article

  • Is there a way to disable the hardware on/off switch for the Wireless interface?

    - by avee
    I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

    Read the article

  • perf tuning for vmfs3 on RAID

    - by maruti
    recommendations for ESX4 OS - VMFS version3: matching: RAID-5 stripe size with VMFS block size? (64K, 128K etc) enabled "adaptive read ahead, write-back" on PERC 6i 90% VMs on server are Windows (2008, 2003, Vista etc, SQL 2005 etc) i have read that smaller stipes are good for writes and larger for reads. Since this is virtual env, not sure whats good.

    Read the article

  • RAID clarification

    - by waiwai933
    Ok, I thought I understood RAID, but I'm looking at images from Wikipedia, and it doesn't seem like I do. For example, take this image: What does the 'parity' do? For example, what happens if Disk 2 suddenly fails? How does the system recover?

    Read the article

  • Create image from RAID images

    - by myforwik
    I have 3 raw images of what was once a 3 disk RAID5 setup. The hardware has been lost and the configuration is unknown. Does anyone know of some software that can automatically detect the raid configuration and write a single image out?

    Read the article

  • DegradedArray event on /dev/md0 without actually having a RAID

    - by J. Stoever
    Since I upgraded from Ubuntu LTS 10 to LTS 12, I have been getting error messages like: N 60 mdadm monitoring Mon Sep 3 06:38 31/1022 DegradedArray event on /dev/md2:Ubuntu-1004-lucid-64-minimal N 61 mdadm monitoring Mon Sep 3 06:38 31/1022 DegradedArray event on /dev/md0:Ubuntu-1004-lucid-64-minimal N 62 mdadm monitoring Mon Sep 3 06:38 31/1022 DegradedArray event on /dev/md1:Ubuntu-1004-lucid-64-minimal We do not have a RAID setup, and only have a single hard drive. Ideas ?

    Read the article

  • Future raid update in a NAS and HP ProLiant alternatives

    - by edwardmlyte
    I'm thinking of buying the HP ProLiant MicroServer*. My question is if I just put a single 2TB drive, how easy would it be in the future to upgrade to a second 2TB drive in a RAID-1 setup? Can this be done without formatting the original 2TB drive? *It looks like the £100 cashback offer is stopping end of Aug, making this system cost around £260 without HDDs. Are there any other brands that anyone would recommend for all-in-one hardware solutions.

    Read the article

  • Raid 5 GPT Partitioning

    - by user39325
    I have a Dell Poweredge r710 server with five 1 TB disks. All of them are in RAID 5. I was trying to install Centos but it says "Your boot partition is on disk using GPT Partition..." I read somewhere that centos can't install on a disk larger than 2TB, so I made some partitions smaller, but it's not working. PS, I am going to install Proxmox on that, but Proxmox also won't accept disks larger than 2TB.

    Read the article

  • How do i Change a Dammage Disk in a Raid 5

    - by Egakagoc2xI
    Hi, I have a 4 drives Raid 5 Server, which one of them is dammage, all drivers are hot plugged. My Question is, I Want to replace the dammage with a new one, Do I have to shutdown the server or just change the hard drives with the server on a it'll rebuild the every or there is a procedure to follow? My Server is a HP. Regards.

    Read the article

  • "Raid 0 SAS" versus "2nd generation SSD"

    - by Stefano
    Hi everybody, i was planning to buy a SAS system made of two 15k RPM disks in Raid 0 configuration to give a boost to my s.o. and my apps... but after i saw that article on Coding Horror, i've started to thinking if a new 2nd generation SSD could do the same job, or even better... Does anybody have any information to help me decide?

    Read the article

  • How do I Change a damaged Disk in a Raid 5 array

    - by Egakagoc2xI
    Hi, I have a server with a 4-drives Raid 5 array; one of the disks is damaged. All the disks are hot pluggable. My Question is, I want to replace the damaged disk with a new one, do I have to shutdown the server or should I just change the hard disk with the server on and it will rebuild the array? There is a procedure to follow? My Server is a HP. Regards.

    Read the article

  • Ubuntu server boot degraded raid

    - by beacon_bonanza
    I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails.

    Read the article

  • 'Memory read error',Sever hardware error?

    - by wss8848
    hello I got a error about my server which is running CentOS5.5. MCE 20 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor CPU 1 BANK 8 TSC 6ab9ff9745f62 [at 2394 Mhz 9 days 1:50:52 uptime (unreliable)] MISC cf36ad0100081186 ADDR 203376500 MCG status: MCi status: MCi_MISC register valid MCi_ADDR register valid MCA: MEMORY CONTROLLER RD_CHANNELunspecified_ERR Transaction: Memory read error STATUS 8c0000400001009f MCGSTATUS 0 what is the matter? is memory card error or memory controller error?

    Read the article

  • RAID across SAS controller ports

    - by BlueGene
    Hi, I'm managing a HP DL360 G5 machine. It has a SAS controller with two ports. Port 1 is attached to 4 drive bays and Port 2 has 2 bays. The machine currently has 3 drives connected to Port 1 with RAID 5 configuration. I'm trying to max out the bays by adding 1 disk in port 1 and 2 in port 2. Can I group those three disks(1 disk-port, 2 disks-port 2) in a RAID 5 configuration?

    Read the article

  • Why does hardware get slower with time?

    - by Alexey Kulikov
    Why does hardware get slower with time? I have been a PC owner since 1990 and every computer I have had in my life became really, really slow after 3-4 years (even with a full system-reinstall). It is the case with Windows PCs. It is also the case with Apple Hardware. Why is this happening? Can this be avoided?

    Read the article

  • Ubuntu hardware compatability

    - by CT
    I have only previously played with ubuntu using virtual machines with VMware Fusion. So everything just sort of worked. I've never had to install any drivers. I'm considering putting it on some real hardware and using it as a media center. What should I be looking for as far as checking hardware compatibility? How does installing drivers work? Any quick and easy recommendations / guides?

    Read the article

  • RAID and Partitions, guidance Needed

    - by beauregarde
    Alright I have a Biostar TA790GX3A2+ Mobo 2x Seagate 750Gb Hard drive (with 2 different speeds) an X4 9750 A GeForce 9800GT and 2GB RAM Hardware Specs link text I want to configure my computer with partitions in various RAID arrays. The Partitions I know i want (disk letters are mostly for reference here) C: XP Boot D: XP Swap E: XP Run F: Games G: Data The Partitions I think I want (repeat caveat) H: small FAT for Win Legacy and DOS I: Linux J: Linux Swap K-?M?: Other Linux /whatever partitions N & O: Attic for D1 and D2 What I'd like to do, is have C: written on Disk 1 (D1),.. D: on D2,.. E: and F: striped on D1 & D2,.. G: mirrored or D1 & D2,.. I: on D2 (so i can just switch disc boot priority to open in Ubuntu),.. J: on D1,.. and H: somewhere low on D1 I am inexperienced with VMs, so i am unsure as to whether those run out of XP, or whether i need to reserve a primary partition for them. However, I think they would be preferable for testing new OS's to scheduling a partition for the same purpose. I'm also not married to XP, but -64 IS pretty important to me. QUestion Time 1) Ignoring the irrationality of it all, is such a configuration possible? If not, can some pseudo-approximation be achieved? 2) My RAID is software, isnt it? 3) How much should I short a 750GB HD? And should i use that space for my attics, or for my attics and something else, or for something else (.iso's perhaps?)? 4) if XP is striped on D1 & D2, will that interfere egregiously with my Swap writes on D2? If so, would striping both XP and Swap relieve (or at least mitigate) that issue? Should XP and Swap just be written normally on 2 different HDs? 5) Should I keep DL's and Drivers on E: (XP Run), F: (Games), or elsewhere? 6) Is 4GB enough for C:? 7) Is 30GB enough (or too much) for E:? 8) How much to reserve for the Linux and sub-Linux partitions? Also, where on the platter do you think i should put them? 9) Am I a fool to use FAT16 instead of FAT32 for H: because I'd rather run 95 than 98SE? If not, do you think 2GB or 4GB? 10) I cant predict what my Max Commit Charge will be, so recommendations for Pagefile size? 5GB? 12GB? 11) VMs, where do I run them? do they exacerbate anything? Would it be better to just emulate Linux, 95, and DOS? EC) What havent I considered that I really should? Notes: computer is mostly for playing games and watching media, though I wouldnt rule out the use of particularly blah-intensive anything.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >