Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 20/318 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • How to identify who is using Hardware Reserved Memory in Windows 7

    - by blasteralfred
    I run Windows 7 x86 Home Premium. I have an installed physical memory of 4 GB, out of which, 2.96 GB is usable (My Computer Properties). I checked the memory usage using Resource Monitor and found 3036 MB / 4096 MB is available. I noticed that 1060 MB is unavailable since it is reserved by some "Hardware component(s)". I would like to know which hardware component is using this 1060 MB. Is there any way or tool to identify this? Note: I know that Windows 7 Home Premium x86 supports a maximum of 4GB RAM.

    Read the article

  • Hardware recommendations for building an Ubuntu encrypted file server

    - by Robert Mashlan
    I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

    Read the article

  • Using the hardware keyboard to simulate button press on Android

    - by Bevor
    Hello, it is difficult to test a game with the mouse pointer on android buttons. I would like to control those buttons with the hardware keyboard. Actually I don't want to control the buttons itself but I want to control the behaviour the buttons would also do. For example I have 4 buttons in the android application with "arrow up, down, left, right". I'd like to use the arrow buttons of my hardware keyboard to control the same. How can I do that? Actually the question is, where can I set the Listener? I tried something in my activity. I set this listener to the application button: button.setOnKeyListener(new OnKeyListener() { @Override public boolean onKey(View v, int keyCode, KeyEvent event) { if (keyCode == KeyEvent.KEYCODE_DPAD_DOWN) //scroll down return true; } }); The behaviour is the following: I can't scroll down with my hardware keyboard but with the hardware keyboard I can select the android buttons (they will be highlighted when I move on any button). After I selected the button with the Listener I can't select any other button anymore but then the Listener comes into force. Now I can scroll down with the hardware keyboard arrow down button. I would like to achieve this behaviour without selecting any button. So I thought about setting the listener to the layout container or any other layout but this has no effect. Is there any other approach to achieve this?

    Read the article

  • How to build a simulation of a login hardware token in .Net

    - by Michel
    Hi, i have a hardware token for remote login to some citrix environment. When i click the button on the device, i get an id and i can use that to login to the citrix farm. I can click the button as much as i like, and every time a new code gets generated, and they all work. Now i want to secure my private website likewise, but not with the hardware token, but with a 'token app' on my phone. So i run an app on my phone, generate a key, and use that to (partly) authenticate myself on the server. But here's the point: i don't know how it works! How can i generate 1, 2 or 100 keys at one time which i can see (on the server) are all valid, but without the server and the phone app having contact (the hardware token also is an 'offline' solution). Can you help me with a hint how i would do this? This is what i thought of so far: the phone app and the server app know (hardcoded) the same encryption key. The phone app encrypts the current time. The server app decrypts the string to the current time and if the diff between that time and the actual server time is less than 10 minutes it's an ok. Difficult for other users to fake a key, but encryption gives such nasty strings to enter, and the hardware token gives me nice things like 'H554TU8' And this is probably not how the real hardware token works, because the server and the phone app must 'know' the same encryption key. Michel

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • How well do laptops with Nvidia Optimus work?

    - by DSJones
    I am considering buying a Dell XPS 15 laptop. The laptop has a nvidia 420m card which should work with linux but I keep reading about the Nvidia optimus technology that isn't supported on Linux. I am not really interested in switching from Nvidia to intel to save power but need to know that the Nvidia card will infact work if i installed Ubuntu. If anyone has experience usung a nvidia card with optimus technology or even better the exact laptop in question (Dell XPS 15 with 1GB NVIDIA® GeForce® GT 420M) it would be great. A major problem holding people back from adopting Linux is this sort of hardware issue. I am a long term Ubuntu user and supporter who can't afford to make a mistake with a purchase like this. I don't want to spend £500+ to find I have no graphics acceleration because Windows7 is not an option.

    Read the article

  • Thoughts on Development using Virtual Machines

    - by J_A_X
    I'll be working as a development lead for a startup and I've suggested that we use VMs for development. I'm not talking about each developer having a desktop with VMs for testing/development, I mean having a server rack where all VMs are managed and have the developers work from a microPC (ChromeOS anyone?) locally, or even remotely from their home computer. To me, the benefits are the fact that it's extremely scalable, cheaper in the long run, easier to manage and that we utilize the hardware its maximum potential. As for cons, I can't think of any particular showstoppers other than we'll need someone to setup/maintain said setup. I was hoping that some of you might of had a similar setup at your place of employment and be able to weight in with your opinions. Thanks.

    Read the article

  • How to Tell If Your Computer is Overheating and What to Do About It

    - by Chris Hoffman
    Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

    Read the article

  • Is Dell Inspiron 15R Special Edition compatible with Ubuntu?

    - by Obada Talal Abu Arisheh
    I want to buy a Dell Inspiron 15R Special Edition. On ubuntu.com, it says that Dell Inspiron 15R will work properly. But the special edition has some special issues. I will list the hardware: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB2 Dual Channel DDR3 SDRAM at 1600MHz 750GB 7200 RPM SATA Hard Drive 8X Tray Load CD/DVD Burner (Dual Layer DVD+/-R Drive) AMD Radeon™ HD 7730M 2GB Built-in Skullcandy™ stereo speakers and Waves MaxxAudio® 4 technology Will it have any problem?

    Read the article

  • Virtuelle Tour durch das Oracle Universum

    - by A&C Redaktion
    Die neue „Oracle Hardware Virtual Tour“ fürs iPhone und iPad ist eine animierte Entdeckungsreise zu verschiedenen Oracle Produkten: Man öffnet Gehäuse, findet diverse Komponenten, kann diese anschauen, drehen und herausfinden, wozu sie gut sind. Zu sehen und erfahren gibt es unter anderem Oracle Exadata, SPARC Systeme, Sun x86 Systeme, Sun Blade und Sun Netra Systeme. Sie alle treten mit dem Anspruch an, Rekorde in Sachen Performance zu brechen, einfach in der Handhabung zu sein, mit hoher Verfügbarkeit zu punkten und Kosten zu sparen. Ein verspieltes Feature – aber eines, das Partner im Kundenkontakt gewinnbringend einsetzen können. Die 3D-Apps laufen auf dem iPhone 3GS, dem iPad 2 oder neueren Geräten.

    Read the article

  • Would like some help in understanding rendering geometry vs textures

    - by Anon
    So I was just pondering whether it is more taxing on the GPU to render geometry or a texture. What I'm trying to see is whether there is a huge difference in rendering two scenes with the same setup: Scene 1: Example Object: A dirt road (nothing else) Geometry: Detailed road, with all the bumps, cracks and so forth done in the mesh Scene 2: Example Object: A dirt road (nothing else) Geometry: A simple mesh, in a form of a road, but in this case maps and textures are simulating cracks, bumps, etc... So of these two, which one is likely to tax the hardware more? Or is it not a like for like comparison? What would be the best way of doing something like this? Go heavy on the textures? Or have a blend of both?

    Read the article

  • Smart card driven membership and door entry system

    - by Rob G
    I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

    Read the article

  • Who makes laptops for Ubuntu?

    - by Tim Lytle
    I'm looking for a laptop and would like to avoid the whole 'is this [specific configuration of hardware] compatible with Ubuntu?' process by finding a laptop manufactured with Ubuntu in mind. I know of system76, but are there any other manufacturers making laptops built to run a standard build of Ubuntu? I'm not counting Dell, as - from my experience - their 'Ubuntu' laptops/netbooks require their build, and because of that have their own set of compatibility issues. UPDATE: And as mentioned in the comments, Dell is no longer selling systems with Ubuntu to consumers.

    Read the article

  • Wireless problems on HP

    - by Sat93
    I'm not able to enable Wireless using the hardware switch on my HP ProBook4430s. Because of this the Enable Wireless option is greyd out and I cannot enable it. The greyd out option can be seen in the screenshot below. The results of iwconfig for my system are as follows, lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. Also I tried to do the following, sudo ifconfig wlan0 up but I got an error as below, SIOCSIFFLAGS: Operation not possible due to RF-kill Also the result of sudo rfkill list all for my system is as follows, 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no How do I fix this problem? Thanku!

    Read the article

  • Ideal laptop specs for a Computer Science Masters student? [closed]

    - by Ayush
    I have a HP pavillion core 2 duo 2 GHz and 4 GB RAM, and it is painful to use this machine for any kind of coding. Eclipse (especially Juno) literally takes 5 minutes to load. And even after that, everything is lagy. Apart from school stuff, I also use my computer as a television. I watch Hulu, Netflix, YouTube etc in 720p, and this laptop gets hot as hell and the fans are loud enough to wake somebody up from deep sleep. I DON'T use my laptop for Gaming or Video/Photo Editing. I'm looking to buy a new laptop (in which most widely used IDEs would work smoothly and playing hi-def videos wouldn't be too much for the machine to handle) any suggestions (on hardware specs) would be greatly appreciated. Thanks

    Read the article

  • What is the history of why bytes are eight bits?

    - by DarenW
    What where the historical forces at work, the tradeoffs to make, in deciding to use groups of eight bits as the fundamental unit ? There were machines, once upon a time, using other word sizes, but today for non-eight-bitness you must look to museum pieces, specialized chips for embedded applications, and DSPs. How did the byte evolve out of the chaos and creativity of the early days of computer design? I can imagine that fewer bits would be ineffective for handling enough data to make computing feasible, while too many would have lead to expensive hardware. Were other influences in play? Why did these forces balance out to eight bits? (BTW, if I could time travel, I'd go back to when the "byte" was declared to be 8 bits, and convince everyone to make it 12 bits, bribing them with some early 21st Century trinkets.)

    Read the article

  • Can't start ubuntu 11.10, Stops at login screen!

    - by Martinpizza
    I have been trying to dual boot ubuntu with windows 7 via WUBI on my custom built pc but without success. When i start the computer i can choose windows or ubuntu i choose ubuntu and when i should get to the login screen the screen just stays purple/pink. Tried safe mode but cant get in there either. I have tried reinstall but did not work either. :( The second time i install ubuntu the screen was purple/pink and the screen was cut of so the left side was on the right side and right side on left side (hard to describe) Third time installing (The last time) it is just like the first time please help!!!! cant get nowhere without help i am kinda new at ubuntu and its creepy commands. Had ubuntu on my old computer. I think the problem is my hardware so here is my computer specs: Amd Fx 6100 Amd HIS Radeon HD 6950 ICEQ X Asus Sabertooth 990fx 1TB Harddrive I have no idea the name on it Please Help me!! Sorry for my bad English! :D

    Read the article

  • What is the best ways to duplicate DVDs in bulk?

    - by Axxmasterr
    I have some instructional videos I am getting ready to release on DVD and I want to know what is the quickest and most cost effective way to produce these in bulk? I am open to both customized PC based software/hardware solutions as well as dedicated hardware appliances which perform the same function. All options considered seriously. I don't have a problem building a system for this purpose. If I build something I would prefer it have the ability to make multiple copies at once. I figure I will need to make about 300 copies initially.

    Read the article

  • How many textures can usually I bind at once?

    - by Avi
    I'm developing a game engine, and it's only going to work on modern (Shader model 4+) hardware. I figure that, by the time I'm done with it, that won't be such an unreasonable requirement. My question is: how many textures can I bind at once on a modern graphics card? 16 would be sufficient. Can I expect most modern graphics cards to support that amount? My GTX 460 appears to support 32, but I have no idea if that's representative of most modern video cards.

    Read the article

  • How do you ensure consistent experience across multiple graphics cards (or even driver versions)?

    - by Grigory Javadyan
    So I was writing a simple 2D game with OpenGL and SDL and had this problem when there was awful tearing when running in windowed mode (even though I explicitly asked SDL_SetVideoMode to use double buffering). Didn't worry about it all too much because most of the time the game grabs the entire screen, windowed mode is just for debugging. Anyway, yesterday I updated my nVidia drivers and tearing disappeared, the game runs smooth and looks nice in windowed mode too. I can see how the problem may be in the graphics driver, but this leads to a question. Obviously, professional game developers have to deal with a lot of different hardware/software configurations. What are the techniques they use to make sure the game looks the roughly the same on different graphics cards or even the same model of graphics card, but with different driver versions?

    Read the article

  • HP mini 210 touchpad issues

    - by user4041
    Need help in getting the right mouse click to work on a HP mini 210-1015TU when using the touchpad. If I plug in a USB mouse, both left click and right click function as normal. Using the touchpad however I can only get the left click to work. Attempting to right click gives the result expected from a left click. As per some comments on a forum I added a file 11-touchpad.conf to /usr/share/X11/xorg.conf.d. I can provide further details if required. This made touchpad operation noticeably smoother but the problem with the right mouse click remains. Not a hardware problem as right clicked worked with 10.04 and still works with Windows 7 starter. 10.10 installed using wubi.

    Read the article

  • Right click doesn't work on HP mini 210 touchpad

    - by user4041
    Need help in getting the right mouse click to work on a HP mini 210-1015TU when using the touchpad. If I plug in a USB mouse, both left click and right click function as normal. Using the touchpad however I can only get the left click to work. Attempting to right click gives the result expected from a left click. As per some comments on a forum I added a file 11-touchpad.conf to /usr/share/X11/xorg.conf.d. I can provide further details if required. This made touchpad operation noticeably smoother but the problem with the right mouse click remains. Not a hardware problem as right clicked worked with 10.04 and still works with Windows 7 starter. 10.10 installed using wubi.

    Read the article

  • Binding hotkey for toggling wireless card state - System76 Bonp3

    - by user109076
    Recently, my wireless card shut off on my laptop (System76 Bonp3 running Ubuntu 12.04 LTS). Awhile back, my keyboard had a meeting with a cup of coffee, and my F11 key no longer works. The key binding for turning my card back on happens to be Fn + F11, so I cannot turn my wifi on. The only solution I can think of is to somehow change this to be bound to another key. I'm looking for the script that handles this particular hardware switch so I can bind it elsewhere.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >