Search Results

Search found 619 results on 25 pages for 'metal drummer'.

Page 20/25 | < Previous Page | 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Worst SysAdmin Accident

    - by Ward
    In line with the question about Best sysadmin accident, what's the worst accident you've been involved in? Unlike the previous question, I mean "worst" in the sense of most system damage or actual harm to people. I'll start with mine: We have two remote wiring closets that are at the end of a 100-foot corridor which has a metal grate for the floor. After we had Cat6 cable installed, the contractors cleaned up all the debris that dropped through the grating to the concrete 3 feet below. A co-worker and I entered the corridor to check on the progress one day but were distracted and didn't notice that a piece of grating had been moved aside. My buddy stepped into air and his chest slammed into the steel crossbar. He was winded and sore enough to take a couple days off, but luckily the steel beam had rounded edges and the size of the opening was such that he didn't smack his head into it or the floor below. Obviously we learned that areas where the floor is partially removed need to be flagged.

    Read the article

  • Electricity in VAIO laptop ports while plugged in

    - by SRbH
    I have VAIO E series (SVE) laptop. While charger plugged in, touching VGA/HDMI/USB port metal casing gives me burning sensation. So, i checked it with voltmeter and i found that while plugged in there is presences of DC +1.0 V. Same case with my friend's VAIO E Series (VPCEH). Service center says this is normal. But i do not believe them as it is not the case with Dell Inspiron. Please let me know if you are facing same problem with VAIO and is it hazardous to devices which i connect to these ports (like HDD, LED, etc)?

    Read the article

  • Realtek HD Audio playing weird with certain video formats

    - by dyasny
    Hi, I have a Gigabyte motherboard with an onboard Realtek HD sound card. The card is working perfectly everywhere, except for a single video format, where the voice is distorted, sounds as if it's been passed through a metal tube. Been googling for this, but couldn't find an answer anywhere. The movie plays fine on other systems (got Linux everywhere else), but on this one (winXP-x64-sp2) it just doesn't. Here are some details: MPC: Type: KLCP WMV File Audio: 0x000a 22050Hz mono 20Kbps [Raw Audio 0] Video: Windows Media Video 9 400x300 29.97fps 227Kbps [Raw Video 1] VLC: Codec: wmas Sample rate: 22050 Bits per sample: 16 Bitrate: 20kb/s

    Read the article

  • Bacula vs. BackupPC [closed]

    - by ujjain
    I have been googling about the differences between them. Bacula has lots of roles BackupPC is easier to configure Bacula works with agent, not rsync (great for Windows backups) It seems that Bacula is most often compared to Amanda though, while BackupPC seems a perfectly lovely and popular backup distribution to. I currently backup my servers with rsnapshot, but I am looking for a professional scalable solution that could also back-up 50 hosts without problems. Preferably a solution that can offer bare metal restores for my Linux servers. I am not looking to reinstall the exact same version of Plesk, the software, etc... Update: I see this ranks high in Google, I found a good article: http://www.serverfocus.org/backuppc-vs-bacula-vs-amanda. I personally think that BackupPC is good for smaller environment, but Bacula, despite the high learning curve, is better for environments that requilre scaling.

    Read the article

  • What are the limitations of virtual machines?

    - by j-g-faustus
    I'm considering setting up a virtual machine running Windows, with Ubuntu 10.10 as the host OS, for those cases where I have a Windows-only program. I understand that using a VM will lose some performance, but are there other limitations to what the OS in a virtual machine can do compared to "running on bare metal"? For example: Can a VM play games, like Dragon Age Origins or Civilization V? (Possibly with poorer framerates and/or lower resolution, but does it play at all?) Can a VM rip DVD/Blue-ray using AnyDVD or similar Windows program? Can a VM handle new hardware that requires dedicated drivers, but the drivers are only available for the OS running inside the VM? (Ex. graphics card, digital camera, card reader for smart card authentication.) Is it possible to say anything about "general limitations" of VMs, or is this wholly dependent on the specific VM?

    Read the article

  • Bacula vs. BackupPC

    - by chronoz
    I have been googling about the differences between them. Bacula has lots of roles BackupPC is easier to configure Bacula works with agent, not rsync (great for Windows backups) It seems that Bacula is most often compared to Amanda though, while BackupPC seems a perfectly lovely and popular backup distribution to. I currently backup my servers with rsnapshot, but I am looking for a professional scalable solution that could also back-up 50 hosts without problems. Preferably a solution that can offer bare metal restores for my Linux servers. I am not looking to reinstall the exact same version of Plesk, the software, etc...

    Read the article

  • What are the mandatory Linux kernel modules to run inside of ESXi

    - by Marcin
    I'm used to rolling my own kernels for servers, as it nicely minimizes the number of exploits (and the resulting patches) to take care of. In a traditional (bare metal) world, the whole process is about knowing what you have (hardware), and what you need (Ethernet, IPv4, iptables, etc.) In a virtualized environment, some things stay the same (still need Ethernet and IPv4), some things go away (power management), and then there are some new needs (vxnet3, or vmware-tools, even though that's compiled outside of the kernel). So my question mostly concerns itself with the last two categories: what can I remove completely, and what new stuff do I want? For example, what IO scheduler do I want, if all my disk operations are going through another filesystem/scheduler/cache to get to the virtual disk? Do I need hyper-threading enabled, or is the VM going to show them to me anyway as a CPU anyway? Do I need Large Receive Offload turned on, or is that something that the hypervisor's network drivers are going to do for me?

    Read the article

  • How to convert an image to a .dwg file

    - by erikric
    My girlfriend is making an art project where she is having an image printed and cut out on a metal plate. The firm responsible for doing this is demanding a .dwg file (and something called polyline; some sort of setting maybe?). Neither of us have heard about this file format, and I find the information about it quite confusing. Most pages seem to link to some schetchy "FooToBarConverter" software, that I frankly don't trust. Could someone please enlighten us on what we need to do, or point to some safe and preferably free software that could do this? (An explanation of the dwg format and the polyline thing would also be much appreciated)

    Read the article

  • How can I set up VLANs in a way that won't put me at risk for VLAN hopping?

    - by hobodave
    We're planning to migrate our production network from a VLAN-less configuration to a tagged VLAN (802.1q) configuration. This diagram summarizes the planned configuration: One significant detail is that a large portion of these hosts will actually be VMs on a single bare-metal machine. In fact, the only physical machines will be DB01, DB02, the firewalls and the switches. All other machines will be virtualized on a single host. One concern that has been is that this approach is complicated (overcomplicated implied), and that the VLANs are only providing an illusion of security, because "VLAN hopping is easy". Is this a valid concern, given that multiple VLANs will be used for a single physical switch port due to virtualization? How would I setup my VLANs appropriately to prevent this risk? Also, I've heard that VMWare ESX has something called "virtual switches". Is this unique to the VMWare hypervisor? If not, is it available with KVM (my planned hypervisor of choice)?. How does that come into play?

    Read the article

  • Enterprise online backup providers

    - by PHLiGHT
    We've used Iron Mountain's LiveVault service but found that it was only good for file level backups. We liked how it backed up every 15 minutes. It doesn't support Exchange 2007-10 and the web interface was very poor. Who else is everyone using? The most notable names in online backup such as Mozy and Carbonite don't really seem suitable for larger companies. We have SQL, Exchange and Sharepoint servers and are looking to virtualize in the near future. Until then bare metal restore capability would be nice. We are currently using Backup Exec 12.5 but that can be so troublesome at times. We have about 2 TB of data. 1TB is archival data.

    Read the article

  • How can I boot directly to a VirtualBox (.vdi) image (possibly via hypervisor)?

    - by Josh
    I have a system image in VirtualBox as a .vdi file. I am aware of how to convert this to other formats of VM using VBoxManage. I'd like to boot this image locally on a number of clients which currently have no OS installed. What's the simplest way to boot into this VM from bare metal? I'm willing to install some minimal OS if necessary. Is this even possible? Maybe there's something out there along the lines of VDI Blaster that will load a locally stored VM?

    Read the article

  • Windows Server 2008 R2 backup includes volume with MSSQL data

    - by J F
    I'm using wbadmin to schedule image backup every night on a Windows Server 2008 R2 Standard server. Ever since installing MS-SQL 2008 Express R2, wbadmin wants to also backup the volume where the MS-SQL data files are located (L:). I'm using -allCritical to make sure bare metal restore will work. command-line: wbadmin start backup -backupTarget:\\myserver\backup$\myserver\%DATE% -include:C: -allCritical -quiet I don't want to do this, because I'm backing up MS-SQL manually elsewhere. It worked just fine only taking C: before I installed MS-SQL.

    Read the article

  • VMWare Hypervisor vSphere 5 - VM static ip from VLAN NAT

    - by Ian Livingstone
    I have a VMWare vSphere 5 Hypervisor server that has a static ip address assigned to it by VLAN that is configured to perform NAT. The static IP is assigned to the bare metal server via the NIC's mac address. I want to setup a guest machine to also have a static ip address, how can I go about having this setup? I have assigned a IP for the guest's MAC Address but it doesn't seem to be working as when I ping the ip address it does not respond. The guest is running ubuntu 10.04 server edition. I am trying to assign it a static public ip address. Any help would be greatly appreciated.

    Read the article

  • Why has ESXi 5.0 not used the software RAID configuration on my test server?

    - by kafka
    I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

    Read the article

  • Adding a new USB port inside a Macbook Pro

    - by MikeC8
    I have a USB Dongle that I'd like to put inside my Macbook Pro. I have already found a spot that will fit the dongle. The next question is splicing one of the USB ports and connecting it to the dongle. Here's a photograph of the inside of my Macbook Pro, showing the USB ports and a little gray plastic divider with four holes in it above each port. http://min.us/mvoQEem My question: Does anyone know what is inside these holes? Presumably each one is a pin for the USB port, right? Can I just stick a wire in there, giving me 4 pins, plus the fifth attached to the metal outside the port? More generally, any one have any ideas for what might be the easiest way to get a USB port inside my MBP? :) Thanks!

    Read the article

  • Windows 7 [virtualized] resolutions in Macbook Pro Retina

    - by Trevor Sullivan
    So, I was considering picking up a Macbook Pro Retina, but then I realized that Apple forces you to scale the resolution, so you don't actually see the true benefits of the 2880x1800 display. Instead, you see upscaled, pixelated icons -- I saw this for myself in an Apple store a couple days ago. That's ok though, because the main reason I'd purchase one is to run Windows 7 on it, however I understand that the bootcamp drivers have not been updated to work with the MBP Retina. Instead, the option would be to run Windows 7 virtualized, but I haven't found any conclusive evidence to indicate whether the entire 2880x1800 resolution would act the same virtualize (VMware Fusion, VirtualBox, Parallels) as running Windows 7 natively. My question is: Does Windows 7 see the entire 2880x1800 virtualized, same as running it on bare metal (boot camp)?

    Read the article

  • does windows incremental backup include system state backup?

    - by Kossel
    I'm managing my very small office server with windows server 2008. since I have only one server, and the user group is really small. I made the first hdd into 2 partitions. one (C:) for windows and Active directory, another (D:) for tomcat and database. I'm doing incremental back C: and D: daily to hdd2 (E:) using windows server backup. is it enough to let me do fully restore my server in case of disaster? I ask this because I have read there is also a system state backup, and I also have to do that periodically in order to get AD back? isn't it with incremental/full backup I can do full bare-metal recovery?

    Read the article

  • How to clean this Dell Precision M6400

    - by Daniel Pratt
    I have (well, ok, my employer has and I use) a Dell Precision M6400 notebook. It's a decent piece of hardware, but I have at least one major gripe: It's a dust and...uh...crumb (I repent! I repent!) magnet! And I cannot seem to exorcise the dust/crumbs from it! There is a strip of metal above the keyboard that is punched full of tiny holes. Well, maybe it's better to describe them as 'pits'. If a sufficiently small particle finds its way into one of those pits, there is only about a 50% that I will manage to get it out. Consequently, there is now a chorus of tiny little particles silently chiding me about eating cookies a cracker whilst I browse the intarwebs. Does anyone have any suggestions about how I could remove these particles from this machine...while still preserving the function of the machine?

    Read the article

  • smartOS HPC config suggestion

    - by Andrew B.
    I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

    Read the article

  • DPM - Monitoring is green, Protection has error and Latest rec point is old. How do I interpret that?

    - by LosManos
    How do I read the DPM info in this case? Monitoring says Failed but Protection shows Ok while having a Latest recovery point from last year. Under Monitoring tab I have Failed for Source | Computer | Protection group | Start time Computer\System Protection | MyServerName | Recovery point | 2014-06-09 19:00:00 which shows me that something happened last night. But under Protection tab everything is green. Here I have Protection group member | | Protection status Protection group ..name.. Computer: MyServerName Computer\System protection Bare metal recovery OK ... Latest recovery point: 2013-12-12 06:32:54 My guess is that backup failed last night once, but succeeded later. It then found out that there hasn't been any change since sometime last year and leave it be and flags Ok.

    Read the article

  • Hyper V cluster - one VM won't migrate

    - by Chris W
    We have a Failover Cluster built up on 6 blades, each running Hyper V. Each box is running Server 2008 R2. We've got a number of VMs running that all have the same basic config: VHD stored on a cluster shared volume. 2 virtual NICs (1 for LAN connection and 1 for SAN connection). All of our VMs will happily migrate between any other blade apart from one single VM which is running fine on it's current blade but will not migrate to any other location. What could be the cause of it or where should I look to get a detailed error message as I can't seem to find much information logged in any of the logs. Edit: I know the usual culprit is mis-matching resource names. We've already been there with the NICs named differently on some of the blades. As far as we can tell now everything looks to be identical on each bit of metal.

    Read the article

  • Mount linux partition as Windows network share over internet

    - by CptEO
    I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

    Read the article

  • Type 1 Hypervisor on the desktop

    - by Blazemore
    I have a powerful home PC, and I've used VirtualBox to run Linux distros in Windows (and vice versa). I'm interested in trying out a lightweight type 1 hypervisor to run all my operating systems (Windows 7, Debian, Arch) and was looking for suggestions of which to pick and how to implement this. From what I gather, a type 1 hypervisor is a lightweight OS which simply provides VM management functionality. Will I get reasonable performance under each guest OS? Can all the guest OSs have access to a shared data drive, or is is best to have a storage server in another guest OS and mount it over the virtual network? What about gaming, is this feasible, or will I realistically need to run Win7 on bare metal? I'd appreciate any input.

    Read the article

  • Is 50% download speed on a wireless G network normal?

    - by Bartlomiej Skwira
    I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

    Read the article

  • Desktop Fun: 21 Cool Ubuntu Wallpapers

    - by Vivek
    Ubuntu 10.04 was released last month, and comes with some breath taking design enhancements, and has some fabulous art work integrated into it. We’ve put together a collection of wallpapers to make it more customized. We thought of pulling out some of the best Ubuntu wallpapers in this post so that you have a good mix to choose from when you are slightly bored of the default Lucid Lynx (Ubuntu 10.04) wallpaper. The following is a collection of top 21 Ubuntu wallpapers. To download the wallpaper just click on the hyperlink above the image. Ubuntu Wallpapers EgFox Lucid Lynx Blue 2010 by ~Eg-Art EgFox Lucid Lynx K HD 2010 by ~Eg-Art Lucid Lynx 10 04 by ~Momez Ubokeh Wallpaper Pack by ~giantspeck lucid fog brown by ~darkburt EgFox Lucid Lynx HD 2010 by ~Eg-Art LTS 2010 by ~alkore31 Ubuntu Bokeh by ~ttk1opc Ubuntu Aurora by *monkeymagico Ubuntu by ~gorkisview Ubuntu Glow by ~BigAction Destroy Ubuntu by ~lukeroberts Ubuntu Triskell by ~deviantdark Ubuntu 2.0 by ~monsteer Ubuntu leaves by ~sizakor Ubuntu Bokeh by ~freyr Ubuntu Brown leather distress by *monkeymagico Ubuntu Black Metal Hex by *monkeymagico Ubuntu gusty 4 walls by ~yf19-sama Ubuntu Wallpaper by ~Ruzzy2006 ubuntu-Gloss by ~SWOriginal Enjoy the new wallpaper to suit your desktop. You also might want to make sure and check out our Desktop Fun section for more collections of cool wallpapers. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Allow Remote Control To Your Desktop On UbuntuCheck your Disk Usage on Ubuntu from the command lineDual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XPDesktop Fun: Starship Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25  | Next Page >