Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 200/444 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • Inexpensive degaussers or HDD shredders?

    - by Nicholas Knight
    I do a lot of work for a small cash-strapped business that has a lot of active hard drives, most are consumer-grade SATA of about five years of age, and predictably they are dying at an increasing rate, and a lot of the time they can't even be detected, let alone complete a zero-out cycle. Right now those drives are just being stored, but that can't continue forever. We've got a couple bad LTO tapes it'd be nice to deal with, too. There are very real security and legal issues that make dropping them off with someone who claims they'll be properly destroyed a gamble. I've looked around at degaussers and HDD shredders, and the ones that don't look like they come from some guy in his basement all seem to be $3000+, which is hard to swallow right now. Is there anything out there in the $500-1500 range that you would recommend? (Speed isn't a big issue, if it takes several minutes or even hours per drive, that's completely OK, we've only got 10 or so thus far.)

    Read the article

  • Unable to diagnose Windows 7 lockup

    - by Delyan
    Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

    Read the article

  • what am I doing wrong? Trying to reinstall Windows 7 starter onto my Acer Aspire One Netbook?

    - by Robbie Roberts
    I have been having some issues with my Netbook so I figured I would reformat it. I downloaded a copy of windows 7 starter, inserted it into my usb dvd drive and started my netbook. I made it as far as, "where do you want to install windows?" and it seems like the computer just freezes. it shows, Disk 0 Partition 1: PQSERVICE 13.0 GB OEM (Reserved) Disk 0 Partition 2: SYSTEM RESERVED 101.0 MB System Disk 0 Partition 3 218.8 GB Primary I cannot click on either of them, What am I doing wrong?

    Read the article

  • Hide Drive / Avoid Low Diskspace Warning on ReadyBoost Cache?

    - by Simon Richter
    I've just added an SSD as a ReadyBoost cache drive, and have two minor cosmetic issues with it: the drive still shows up in the drive list I get a warning balloon every five minutes that the drive is full and that I should empty the Recycle Bin. The former is ignorable (and I guess I can solve it with a group policy); the latter is somewhat going on my nerves. Are there official buttons "hide ReadyBoost drives" and "do not warn on low diskspace for ReadyBoost drives" somewhere that I may have missed? If not, I guess I can use the group policy to hide the drive; I'd still need a way for the system to not warn about the drive being full. Also, am I right that I need to assign a drive letter and format the drive with NTFS to use it for ReadyBoost, or is there a way to just use the raw device?

    Read the article

  • Windows 7 PC refuses to join domain

    - by Alex
    So, we're wiping clean all PCs at our office and migrating them to a new server cluster and a new domain. Last night I tested on PC and it mostly worked except it refuses to join to the domain. Now, our domain is named like EXAMPLE.COM. When I just type EXAMPLE the PC can't find the domain controller, even though I can ping it find. If I type EXAMPLE.COM it seems to work. How can I get it to work with just EXAMPLE? That's how I got all the new servers int he cluster to work (about 20 of them) and I haven't had any issues... The only difference between the Windows 7 PC(s) and the servers is that the clients will be on a 10.0.3.X network where as the servers are on a 10.0.1.X network. Oh, the domain controller and all the other servers are Windows Server 2008 R2. Suggestions will be highly appreciated!

    Read the article

  • What is normal SCSI error handling process (scsi_eh_3) CPU time usage?

    - by Kris Jordan
    Last week I got setup with a new dedicated server that is running 4x SCSI drives in RAID 10 on CentOS. The machine is pretty lightly loaded at the moment and has been running for 8 days. The process 'scsi_eh_3' has a CPU time of 13:09.67 in top. This is 3x the next closest CPU time of 4:03.93 for mysqld. Is it normal for the scsi error handling process to use this much CPU time? (Seems like it goes to 0.3% usage ever 5 seconds.) Could this be an indicator that one or more of the drives is having issues?

    Read the article

  • Django freezes when adding objects through the admin

    - by Quartz
    I have a Django 1.1 website running via Apache/mod_wsgi with a PostgreSQL 8.3.1 database. Recently, when I added objects through the admin interface, the connection froze up and I lost several worker processes, so I had to restart Apache. Upon trying to replicate this, I found that it only happens through the admin: if I go into the Django shell and issue the same insert, it works fine. Also, performing an UPDATE operation works without issues, so just INSERTs. I've rebuilt indexes on PostgreSQL and run a full VACUUM. Error logs don't show anything, and I can't figure out for the life of me what's wrong. Anyone have any ideas?

    Read the article

  • What is a preferred method for automatically configuring and setting up an Ubuntu instance?

    - by sutch
    I am tired of manually configuring instances of Ubuntu for testing web applications and for setting up workstations. I'm even more frustrated by the issues caused by inconsistent configurations. Is there a method (hopefully not too time consuming to learn and setup) that allows for automation of the setup and configuration of an Ubuntu server or workstation from an ISO. This is primarily for virtual machine instances, but it would be helpful to also create instances on hardware. I am specifically looking for a method to automate the installation of libraries (apt-get), configure services (such as Apache and MySQL), add 3rd party software (download, extract and build), and add libraries to scripting languages (for example, Ruby Gems or CPAN packages for Perl).

    Read the article

  • VMWare ESX installation on sata disk

    - by ilansch
    I have a PC with Gigabyte H77 motherboard with Intel I5-3550 CPU 8 GB RAM 1600MHz and a 500GB Harddisk (7200RPM) - WD Sata III disk I wish to install esx on it and run some virtual machines on it. not alot, something like 2-3 VMs. My hardisk is Sata, is it possible to install ESX Server on it ? I am not worried about loading issues. When i try loading the installation it writes it cannot detect my disk (since its not SCSI disk). How can i bypass this ? or find a solution. thanks

    Read the article

  • Disable .net completely in a IIS6 Application Pool

    - by David L.-Pratte
    we're managing some web sites for our clients on our servers, some running Windows Server 2003 R2 and others running 2008 R2. In Windows Server 2008 R2, we can disable completely .NET framework usage for some application pools, which is great since most of our websites are still using classic ASP. After some issues with classic ASP applications being configured to run as ASP.NET 4 in a CLR 2.0 pool, we wanted to do the same thing in IIS6 - that is, have application pools without any .NET support. Is this a supported scenario in IIS6? Thanks

    Read the article

  • how do I setup Apache's Content-Encoding Header?

    - by Nick
    When attempting to validate my site with the W3C validator, it returns the error, "Don't know how to decode Content-Encoding 'none'". Firebug confirms that my server is sending the header, "Content-Encoding: none". But I can't find any directive in apache2.conf or in my vhost that sets the Content-Encoding header. Where does the directive go, and what should it be set to? UPDATE: On further examination it seems something is wrong with mod_deflate (gzip). It's zipping my css files just fine, but is not zipping the html generated by my php scripts. I have: AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css And the pages are showing a mime type of: "text/html". But content encoding is "none" and they aren't zipping. Perhaps these issues are related?

    Read the article

  • Using Windows 7 XP Mode for games

    - by Josefvz
    Hi all. I have Win 7 (x64) at home and I want to play some old games (specifically Lands of Lore 3, but also some others). This game does not work properly on Win 7, and there are no patches that I'm aware of to fix its issues. Can I use XP Mode to play this game (and other non Win 7 nice games), or is there a better way? I only have one PC and dual booting scares me... (so no to dual booting!) Another question: Will I have full hardware support (full use of my graphics card, etc) when I use DOSbox or a VM? I have decided to go with VirtualBox or vmware, I'll check which one gives the best performance, thanks for your input!

    Read the article

  • Upgrading from MySQL Server to MariaDB

    - by Korrupzion
    I've heard that MariaDB has better performance than MySQL-Server. I'm running software that makes an intensive use of MySQL, thats why I want to try upgrading to MariaDB. Please tell me your experiences doing this conversion, and instructions or tips. Also, which files I should take care of for making a backup of MySQL-Server, so if something goes wrong with MariaDB, I could rollback to MySQL without issues? I would use this but i'm not sure if it's enough to get a full backup of MySQL-Server confs and databases mysqldump --all-databases backup /etc/mysql My Environment: uname -a (Debian Lenny) Linux charizard 2.6.26-2-amd64 #1 SMP Thu Sep 16 15:56:38 UTC 2010 x86_64 GNU/Linux MySQL Server Version: Server version 5.0.51a-24+lenny4 MySQL Client: 5.0.51a Statistics: Threads: 25 Questions: 14690861 Slow queries: 9 Opens: 21428 Flush tables: 1 Open tables: 128 Queries per second avg: 162.666 Uptime: 1 day 1 hour 5 min 13 sec Thanks! PS: Rate my english :D

    Read the article

  • Serious voltage and temperature problems

    - by James Willson
    My computer has been acting up when I play games so I wanted to look into why. Issue 1: GPU Temp According to afterburner and speedfan my 8800GTX idles at 90 degrees and then when playing games shoots up to over 110C which is when my graphics basically starts to give rendering issues. Issue 2: CPU Temp Speedfan is saying my CPU temp is 83C idle but when I look at core temp it says core0 is at 35C and core1 is at 33C. Issue 3: Voltages This is what speedfan is saying for my voltages: Vcore1: 1.01V Vcore2: 1.90V +3.3V: 3.31V +5V: 4.95V +12V: 0.51V -12V: -16.80V -5V: -8.43V +5V 5.13V Vbat: 3.25V Vcore: 3.00V +3.3V: 3.20V These voltages, for lack of a better word, look f*cked. With all this happening, the computer runs ok under normal use. Is the software giving out incorrect readouts or instead should I immediately move the computer into another room before it explodes? P.s I would like to add this is a stock system. EVGA 8800GTX, E6850 CPU, 800W PSU

    Read the article

  • Configuring NVIDIA Quadro with Dell Precision M4600

    - by vsecades
    After a frustrating couple of weeks when I recently bought my Dell Precision laptop, I managed to fix an issue where Ubuntu (yes, was NOT using Windows, get serious) would not recognize the video card and would cause all sorts of problems all over the place. I ended up one Saturday morning nearly throwing this thing away, when I managed to find a post about NVIDIA Optimus technology... ( http://www.pcmag.com/article2/0,2817,2358963,00.asp ). Now I am a huge advocate of disruptive new stuff, as long as we keep the broader audience in mind. Anyhow, disabling this (which as the BIOS settings state only work on Windows 7 or later), effectively allow the NVIDIA based Ubuntu driver to kick in full force. No need for a trash can anymore thankfully. As I saw multiple posts all over the place about this, check your BIOS, disable and try the video again to see if this corrects your issues. Best of luck!

    Read the article

  • How to determine main movie DVD track before ripping via mencoder

    - by Ampp3
    Maybe there's a simple answer for this, but when looking at the files on a DVD (IFOs, VOBs,etc), is there a way to easily determine the longest/main track? I'm trying to automate the process of finding the main movie track on a DVD and am running into issues. I thought this could be done by finding the BIGGEST track (look through VTS_XX_N.VOB files, where XX is the track number, and find the track with the largest filesize (sum sizes of VOB files for that track)), but apparently that isn't correct. One DVD had track 7 as the largest track (by my method), but mencoder didn't produce the correct output with this track, but worked with track 9 instead. Am I missing something? EDIT: I've heard of the utility 'lsdvd' for getting track information, but I was hoping to avoid compiling this, and use a basic method instead (ie: what I tried above). Does anyone have any idea WHY my idea didn't work?

    Read the article

  • How can I debug Cisco Firewall ASA "Dispatch Unit" very high CPU utilisation from ASDM?

    - by Andy
    I have recently had my first firewall installed so I am very new to this whole situation. I am finding that Dispatch unit is becoming overloaded and it would appear to be the reason I get serious bouts of lag on my server. The firewall has had little configuration apart from me blocking all the ports in "Access Rules" and allowing only the ones the server needs and from where it needs them. I guess what I am after is assistance with locating the issues causing "Dispatch Unit" to take up all the CPU Regards --Edit-- With ASDM statistics I found that packets inbound (peak of 70-100k/sec from <1k/sec normal), traffic inbound (peak of 40-50kbits/sec from <1kbits/sec normal) and CPU all peak at the same time so I am pretty sure it is an attack of some sort but as a beginner with ASA I am not sure how to resolve

    Read the article

  • Optimal way to make MySQL backups for fairly large databases (MyISAM / InnoDB)

    - by WinkyWolly
    Currently we have one beefy MySQL database that runs a couple of high traffic Django based websites as well as some e-commerce websites of decent size. As a result we have a fair amount of large databases using both InnoDB and MyISAM tables. Unfortunately we've recently hit a wall due to the amount of traffic so I've setup another master server to help alleviate reads / backups. Now at the moment I simply use mysqldump with a few arguments and it's proven to be fine.. until now. Obviously mysqldump is a slow quick method however I believe we've outgrown its use. I now need a good alternative and have been looking into utilizing Maatkits mk-parallel-dump utility or an LVM snapshot solution. Succinct short version: I have a fairly large MySQL databases I need to backup Current method using mysqldump is inefficient and slow (causing issues) Looking into something such as mk-parallel-dump or LVM snapshots Any recommendations or ideas would be appreciated - since I have to re-do how we're doing things I rather have it done properly / most efficient :).

    Read the article

  • Missing Right Click Menu Text After Sleep

    - by petebob796
    I have a laptop running Windows 7 and regularly close the lid to put it in sleep mode. Recently after resuming from sleep if I go to access the right click menu in the windows shell when I hover over the menu items the text disappears and doesn't re-appear without closing the menu and right clicking again. The only way to fix this is to restart. Any ideas what could be causing this? I have an nvidia 8600m gs graphics card which had a BSOD problem a while back at boot up but since I underclocked it slightly it has been running fine and I experience no other issues but this. This only affects right click menus that are part of the windows so not any programs right click menu. It's not a major problem just strange and a little annoying.

    Read the article

  • Single domain user can't install a specific shared network printer

    - by drpcken
    I have a file server serving up shared network printers. Never had any issues in the past. I have a specific domain user (just 1) that gets this error when trying to install a specific printer: You do not have sufficient access to your computer to connect to the selected printer This user can install all the other printers no problem. All my other domain users can install the printer with no problem. I've removed the driver from the local client and tried again but with the same problem. Even as an administrator I get this error. Is there something I'm missing?

    Read the article

  • ATI Radeon Drivers works with which linux distribution and version?

    - by amit.codename13
    I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. UPDATE: The kind of problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta Thanks

    Read the article

  • VSTS2010 crashes on opening the team explorer->My queries node

    - by vstsuser
    VSTS2010 crashes on opening the team explorer-My queries node this does not repeat if MSN office communicator (2007 R2 version) is exited. the issue occurs only if MSN office communicator is up and running. (no issues reported by communicator though) Any help in this regard? Debug log: Unable to cast COM object of type 'CommunicatorAPI.MessengerClass' to interface type 'MessengerAPI.IMessenger2'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{....}' failed due to the following error: Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)). Windows event log EventType clr20r3, P1 devenv.exe, P2 10.0.30319.1, P3 4ba1fab3, P4 microsoft.teamfoundation.collaboration.microsoft, P5 10.0.0.0, P6 4c7d8ce4, P7 49, P8 0, P9 system.invalidcastexception, P10 NIL.

    Read the article

  • Outlook 2007 disconnecting after sending email to specific email

    - by Michael
    So when a user emails another tech in my domain they get the prompt for username/password as though they got disconnected. I have not seen any issues in the event logs, tried deleting the email address from his auto correct, ran Outlook in safe mode and searched online as well. I am kind of lost. Checked the event logs on the exchange server as well in the security and still nothing. Exchange 2010, Client OS: Vista x64, Outlook 2007. Thanks!

    Read the article

  • Best practice for scaling a single application source to multiple nodes

    - by Andrew Waters
    I have an application which needs to scale horizontally to cover web and service nodes (at the moment they're all on one) but interact with the same set of databases and source files (both application code and custom assets). Database is no problem, it's handled already with replication in MongoDB. Also, the configuration of the servers are the same (100% linux). This question is literally about sharing a filesystem between machines so that its content is always correct, regardless of the node accessing it. My two thoughts have so far been NFS and SAN - SAN being prohibitively expensive and NFS seeing some performance issues on the second node with regards to glob()ing in PHP. Does anyone have recommended strategies or other techniques that don't involved sharding data across nodes or any potential gotchas in NFS that may cause slow disk seek times? To give you an idea of the scale, the main node initialises it's application modules in ~ 0.01 seconds. The secondary is taking ~2.2 seconds. They're VM's inside a local virtual network in ESXi and ping time between them is ~0.3ms

    Read the article

  • How to debug high memory usage by registry?

    - by bkr
    I have a windows 2008 r2 server running ADFS2 and some web apps that is having issues with low memory. Digging around I found that the 5.5 GB were being used under Kernel Memory (paged). Further digging with Poolmon, I discovered that the majority of that (5GB+) was being used by CM - configuration manager. Also known as the registry. I'm really now sure how to tell why the registry is using so much memory however, or how to release it? Looking at the physical registry files they don't appear that large. EDIT #1 Using the powershell script @ http://jdhitsolutions.com/blog/2011/05/get-registry-size-and-age/ confirms what I saw looking at the physical registry files, that they're relatively small Computername : (removed) Status : OK CurrentSize : 67 MaximumSize : 2048 FreeSize : 1981 PercentFree : 96.728515625 Created : 4/1/2011 11:38:02 AM Age : 454.23:41:28.2540682

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >