Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 196/444 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• How to erase a SSD to restore factory performance in Linux?

  - by Andy B

  Due to big performance issues with an mdraid-1 array I'd like to pull down from the array one of the devices (Samsung 840 Pro), erase it to restore factory performance and re-add it to the array. The reason I want to do this to one of the SSDs is because the poor performance seems to be related to one specific SSD out of the two (although they are the same brand, model and firmware ver). But how do I erase a SSD from Linux? I mention that hdparm indicates that both drives are frozen at this time. Maybe because they are part of an md array? Thanks in advance!

  Read the article

• iptables NAT configuration

  - by Sarp Kaya

  Hello I am experiencing some issues with my iptables. Here's what I want to do: A(eth0)--------(eth0)B(eth2)---------------(eth2)C Brackets are interface names A,B and C are hosts. Now I would like to forward port number 80 of host C so that It would be accessed via host A. host A is 192.168.1.254 host C is 192.168.3.2 I intentionally ACCEPTed all FILTER chain options as the default policy because I wanted to make sure that NAT is working properly first. I enabled ip_forward. So here's what I have done: sudo iptables -A PREROUTING -t nat -p tcp - d 192.168.1.254 -j DNAT --to 192.168.3.2 However it is not working. What am I missing here?

  Read the article

• Parallel installation of Office 2003 and Outlook 2010

  - by Marcel Janus

  we have a customer who is not willing to move from Office 2003 to Office 2010 but he now wants to use Office 365. As you know is Office 365 not compatible with Outlook 2003. Now he asked me if it's possible to buy and install Outlook 2010 and keep the rest as it is. I only found some guides for parallel installation of Office 2007 and Office 2010. So my question is if this solution will work. Or are there any issues known?

  Read the article

• What settings need to be changed to allow EC2 instances to use Amazon's Route 53 for DNS?

  - by ks78

  I have a number of Amazon EC2 instances, all running Ubuntu, which I'd like to configure to use Amazon's Route 53. I setup a script, following Shlomo Swidler's article, but ran into script-related issues, which were answered here. Now, I have the script working, but my instances are still not able to access Route 53's DNS. By this I mean, they are not able to resolve hostnames to IP addresses. My instances are currently configured with the DNS server IP address Amazon pushes out to them by default, does that need to be changed when using Route 53? I'm also IP-restricting my instances using the Security Groups. Could that be the problem? Is there a certain IP address or port I should open to allow communication with Route 53? It seems that DNS requests should be originating from my instances so the Security Groups shouldn't be an issue, but I've been wrong before. If anyone has any ideas, I'd really appreciate it.

  Read the article

• IE8 complains about SSL name mistmatch

  - by Cerin

  When visiting an SSL protected website, IE8 complains about the certificate name not matching the website address, but gives no information about the certificate or what name it's looking for. Visiting the same site in IE9 (or IE9 in "IE8 mode"), Firefox, Chrome, and Safari shows no problems, and that the certificate matches the address. Certificate checkers indicate everything is installed and configured correctly. Does anyone know what might be causing this? Is this a known issue or bug in IE8? I've been Googling for similar issues, but due to the uncertainty as to what's actually going on, I'm not sure what to search for. My problem reads similar to this question. However, my server is running Apache2.

  Read the article

• Setting DNS suffix for multiple network adapters in a VM

  - by arun_bh

  Is there a way to set the DNS Suffix for multiple network adapters in a VM using the sysprep file? We are trying to setup Windows 2003 VMs with 2 network adapters. In the one adapter case the sysprep we are able to set the suffix using DNSDomain. But this doesnt work in the 2 adapter case. The The VM is setup corrently though without any issues but one of our apps relies on the DNS Suffix value to work correctly. Thanks in advance.

  Read the article

• Reliable procedure/tool for removing print drivers in Windows 7 (domain environment)

  - by ultrasawblade

  One of the troubleshooting steps in resolving printer-related issues with any version of Windows is to remove installed print drivers and then reinstall the drivers. This is a domain environment and drivers are pulled from a print server. I've had occasion to need to do this on a user's system running Windows 7 Enterprise 64-bit. These procedures don't work: Removing the printer from Devices and Printers (doesn't remove driver obviously) Doing the above, going into Server Properties, and attempting to remove the driver (fails with a "driver in use" error) Opening an empty mmc, adding the Print Management snap-in, and attempting to do the above. Doing sc stop spooler and sc start spooler before doing both of the above Now I know it's possible to remove drivers with the spooler service stopped and then going into the spool directory, as well as deleting registry entries. I'm asking if a tool exists to do this where I can just select the driver in question and it be removed.

  Read the article

• I've created a software RAID on SUSE EL 10 and now I need to monitor it.......

  - by Thomas B.

  I have created a Software Raid using the yast2 GUI on SUSE ES 10/11. The raid works great and it's a raid 5. I have 5 Drives they are cheap 2GB Cases that have 2 - 1TB Drives in each case (Serial ATA Drives) and I connect them in via Esata to the motherboard. The problem I have as this is "cheap" storage when of the the 5 drives goes out on the RAID I seem to have no logs of any issues and it get's harder and harder to write to it until it dies. I use SAMBA to mount the 4TB parition to my PC's in my home on a GIG network. My question is this, are there any good (Free) tools in Linux to monitor a raid or the drives on the raid to detect any problems??? I haven't found any yet and was just wondering if some exist.

  Read the article

• Multiple SSIDs better or worse

  - by swiss196

  I'm just setting up a network in a student house with 10 rooms, 3 floors. Configuration at the moment is as follows: Virgin Media 100mb Cable Virgin SuperHub on ground floor broadcasting on SSID1 Second AP(Edimax) wired on middle floor broadcasting on SSID2 These two networks server all 3 floors fairly well but I was wondering whether it would be better to setup an individual SSID for each floor (both the routers allow me to configure up to 3 ssids on each!). Would this help with speed issues, i.e if someone on the top floor is downloading/streaming etc, this wouldn't affect someone on the middle floor on a different SSID Or, will it have no effect? Thanks, Dave

  Read the article

• Windows 7, files reappear after deletion.

  - by HeavyWave

  I'm trying to delete some files from a folder. I've taken ownership of the files and the folder. When I delete these files Windows doesn't report any errors and deletes them. BUT, after I press F5 these files reappear again. There are no messages whatsoever, they are just undeletable. I know login off will help, but how do I fix it without going through the pain of closing everything down? P.S. Files disappear from the folder after aprox. 5 minutes. Update. Turns out my version of Windows did not properly upgrade from test version, so it had some weird disk drive issues.

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

  - by ajit.george

  I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues? Thanks in advance.

  Read the article

• How long do managed gigabit ethernet switches take to boot up?

  - by Warren P

  One critical drawback that I have found in researching managed-switches, and one that I have some past experience with is that anything with "lots" of firmware is going to have lots of issues associated with that firmware. We are in the middle of researching rackmount gigabit switches (48 port). It looks like for 48 ports, our only choice is managed switches (Dell, Cisco/Linksys,HP, etc). What I want to know, that I can not find out much about is the boot-time for various managed switches. If you own one, can you please answer with the model number, and the cold boot time in seconds. I have read online that Linksys (now Cisco) SRW series sometimes take almost 5 minutes before they are fully booted up, and that is an unacceptable cost for us. I particularly want to know about Dell PowerConnect managed switch bootup time (model 3548 and 5448), and would like to confirm the 5-minute boot time on the SRW2048 or similar model, and any HP ProCurve boot up times. The composite of all those figures ought to form an interesting overall performance picture.

  Read the article

• How can I keep websites from knowing where I live?

  - by D Connors

  This questions is related to issues and practicality, not security. I live in Brazil and, apparently, every single website I visit knows about it. Usually that's ok, but there are quite a few sites that don't make use of that information adequately. For instance: Bing keeps thinking that brazilian pages are way more relevant to me than american ones (which they're not). Google.com always redirects me to google.com.br. Microsoft automatically sends me to horribly translated support pages in portuguese (which would just be easier to read in english). These are just a few examples. Usually it's stuff I can live with (or work around), but some of them are just plain irritating. I have geolocation disabled in firefox, so I guess they're either getting this information from my IP or from windows itself (which I bought here). Is there a way to avoid this? Either tell them nothing or make them think I live somewhere else? Thanks

  Read the article

• How to store 250TB of data and develop a backup/recovery plan?

  - by luccio

  I'm really new to this topic, so big apology for stupid questions. I have a school project and I want to know how to store 250TB of data with life-cycle for 18 months. It means every record is stored for 18 months and after this period of time can be deleted. There are 2 issues: store data backup data Due to amount of data I will probably need to combine data tapes and hard drives. I'd like to have "fast" access to 3 month old data, so ~42TB on disk. I really don't know what RAID should I use, or is here any better solution than combining disk and data tapes? Thanks for any advice, article, anything. I'm getting lost.

  Read the article

• Monitor sleep in Windows XP does not work. Is there an add on to force it?

  - by bert

  I have an EEE box with XP Home and a DVI connected TFT, and it does not sleep the monitor. It only starts working after I go to the energy control panel and turn it off and on again. Then the timed sleep works for the current session of computer use. After a shut down and boot next day, sleep does not work again (it is still set in the preferences however). What can hold the sleep function from working? Are there issues with Skype or MSN? Is there a utility to be less critic to processes interrupting sleep and offer a more reliable monitor sleep function for XP?

  Read the article

• Wordpress Automatic Updating/Installing Plugins Permissions

  - by karmic

  I am using the latest Wordpress and I have always had issues with the automatic updater. For the files in the wordpress directory, i set them to permission 770, and add the webserver user 'www-data' as the group owner. I use lighttpd. However, the automatic updating plugins or installing plugins does not work. It works if I chmod 777 the files or if I set the actual owner to the web server as well. What are the best permission settings for security while still allowing the updating feature to work properly in wordress? Also, by 'not work' i mean, it will go to the screen that asks me for FTP credentials when I try to update.

  Read the article

• Could some one please explain the various proxy configuration scenarios?

  - by RP.

  I am working on a client application in C# which does a various kinds of communication with a server( eg: uploads, downloads etc ). We have a legacy system which does the same functionality and we get in to proxy configuration related issues frequently.It uses the settings from internet explorer network settings. Most of the time these are due to specific proxy configuration( Eg: Proxy auto-config etc ). I am trying to understand the various scenarios used in corporate environments for proxy configurations. Could some one please explain the various proxy configuration scenarios?

  Read the article

• squid transparent proxy on all ports

  - by Yves Richard

  I have setup squid as a transparent proxy by redirecting port 80 to the native squid port 3128. I know there are issues with getting secure ports like ssl and imaps to go though the proxy but can I redirect all other ports through the proxy as well. I am trying to get a better idea of bandwidth usage. I have setup iptables to log usage and i am getting most traffic going into the related/established rule. I am trying to determine the origins of this traffic by sending traffic to squid for more detailed logging.

  Read the article

• tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

  - by Ajit George

  I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues?

  Read the article

• Browsing not working in Windows 8

  - by Jonathan Perry

  I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

  Read the article

• MAMP PHP5.3 and 5.4

  - by musoNic80

  I've just downloaded the latest version of MAMP (2.1) but have run into a few issues. I'm developing using Symfony2 which requires php5.3 minimum. It also requires a php accelerator, ideally APC. So, I set MAMP (I'm not using MAMP PRO) to use php 5.4. Problem solved, I thought. Apparently not though. It turns out MAMP have decided not to support APC (or any accelerator as far as I can see) with their 5.4 version apparently due to it being buggy (really?!?!). Ok, so I'll just use 5.3 instead. Apparently not. It turns out that although MAMP has installed 5.3 on my machine I can't select it in the preference pane. I get a choice of 5.2 or 5.4! Is there a workaround for this?

  Read the article

• VMware Server guest systems are extremely slow with IO load on host (Ubuntu 8.04)

  - by Dennis G.

  We are experiencing performance issues with a VMware Server 2.x installation on an Ubuntu 8.04 host. When the host system is generating IO load (for example, copying large files as part of a backup operation), the guests (also Ubuntu 8.04) become extremely unresponsive and slow (simple Apache HTTP requests taking 5 seconds instead of the usual 200ms). We tried optimizing various aspects of the VMs, but the issue remains. Is there a known bug with VMware performance under linux if host IO load is high? Is there a way to fix this? Is this only an issue with Ubuntu systems, or have you seen it on other systems before? Thanks!

  Read the article

• automating sql express backup via VSS backup

  - by Ornus

  I need to set up on my server automated daily SQL db backups (sql express, so no maintenance plans). To keep things simple I'm gonna use a backup solution (JungleDisk) that uses VSS to back up the DB file. SQL fully supports VSS and on requests freezes DB I/O, so I understand I'm taking snapshots. JungleDisk supports doing differential back up and compression, so it simplifies things and keeps the cost/bandwidth down. Is it enough to just backup up db file (mdf). Do I need to back up transaction log (ldf) file as well? I'm ok with losing a day's worth of work (since the last backup). if I go this route, what's the best way to restore the database? are there any issues with this approach I'm not aware of?

  Read the article

• Effects of enabling DVFS in a CPU

  - by Nrew

  I came up with this energy regulating software called Granola while reading at Ghacks.net I downloaded and installed the software but you need to enable the DVFS function in the CPU. I booted up and tried to enable DVFS in the CPU Configuration in my Asus motherboard(Desktop). But in the description it said that enabling the feature might raise some compatibility issues with the power supply. And I'm afraid that I might ruin the CPU if I do this. Any suggestions, any one here who has tried this before? I don't know who the manufacturer of my power supply is. Would you recommend some software that can determine every possible info about the power supply.

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >