Search Results

Search found 9845 results on 394 pages for 'xbox controller'.

Page 200/394 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • HomeMade/DIY NAS solution

    - by MicTech
    Has anyone experience with building NAS (Network-attached storage) for home/small office using? What component would you recommend? Hardware CPU motherboard HDDs RAID controller etc. Software OS FTP HTTP etc.

    Read the article

  • MD3200 - 3 to 4x less throughput than MD1220. Am I missing something here?

    - by Igor Polishchuk
    I have two R710 servers with similar configuration. One in my office has MD1220 attached. Another one in the datacenter of my hosting services vendor has MD3200. I'm getting significantly worse throughput from MD3200 at my vendors setup. I'm mostly interested in sequential writes, and I'm getting these results in bonnie++ and dd tests: Seq. writes on MD1220 in my office: 1.1 GB/s - bonnie++, 1.3GB/s - dd Seq. writes on MD3200 at my vendor's: 240MB/s - bonnie++, 310MB/s - dd Unfortunately, I could not test the exactly the same configurations, but the two I have should be comparable. If anything, my good performing environment is cheaper than the bad performing. I expect at least similar throughput from these two setups. My vendor cannot really help me. Hopefully, somebody more familiar with the DAS performance can look at it and tell if I'm missing something here and my expectations are too high. To summarize, the question here is it reasonable to expect about 100MB/s of sequential write throughput per each couple of drives in RAID10 on MD3200? Is there any trick to enable such performance in MD3200 with dual controller as opposed to simple MD1220 with a single H800 adapter? More details about the configurations: A good one in my office: Dell R710 2CPU X5650 @ 2.67GHz 12 cores 96GB DDR3, OS: RHEL 5.5, kernel 2.6.18-194.26.1.el5 x86_64 20x300GB 2.5" SAS 10K in a single RAID10 1MB chunk size on MD1220 + Dell H800 I/O controller with 1GB cache in the host Not so good one at my vendor's: Dell R710 2CPU L5520 @ 2.27GHz 8 cores 144GB DDR3, OS: RHEL 5.5, kernel 2.6.18-194.11.4.el5 x86_64 20x146GB 2.5" SAS 15K in a single RAID10 512KB chunk size, Dell MD3200, 2 I/O controllers in array with 1GB cache each Additional information. I've also ran the same tests on the same vendor's host, but the storage was: two raids of 14x146GB 15K RPM drives RAID 10, striped together on the OS level on MD3000+MD1000. The performance was about 25% worse than on MD3200 despite having more drives. When I ran similar tests on the internal storage of my vendor's host (2x146GB 15K RPM drives RAID1, Perc 6i) I've got about 128MB/s seq. writes. Just two internal drives gave me about a half of 20 drives' throughput on MD3200. The random I/O performance of the MD3200 setup is ok, it gives me at least 1300 IOPS. I'm mostly have problems with sequentioal I/O throughput. Thank you for looking into it. Regards Igor

    Read the article

  • How do I fix this Windows 7 wireless connectivity issue?

    - by Charles Randall
    I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

    Read the article

  • How to fix network connection dead on startup, but okay after disable/enable?

    - by bill weaver
    on Startup When my system starts up, the internet connection is dead. This causes various problems with startup items such as updates and auto-start programs failing. However, the connection is fine after going into Network and Sharing, Change adapter settings, then disabling and re-enabling the adapter. Any suggestions on why this is happening and how to fix it? System summary: Windows 7, 64 bit, Realtek PCIe GBE Family Controller, Linksys WRT610N router, Sci Atlanta cable modem.

    Read the article

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • Dell Poweredge 2650 RAC Issue

    - by Ryanteck
    I just got a second hand Dell Poweredge 2650 and its working fine. I can access the embedded remote access controller via the Racadm.exe tool (Under wine) but the web based version of it (Which I would prefer to use) has an SSL certificate error. I select continue I know there are risks ect and java starts up. It then gives me the error failed to validate certificate the application will not be executed Is there any way to be able to fix this? *Update Full java error output @ http://paste.ubuntu.com/6352862/

    Read the article

  • VMWare Esxi Looking for Bottlenecks

    - by nextgenneo
    I have a VMWare ESxi box, 22GB ram, Dual Quad Core Xeon, 2 Sas drives + Write caching raid controller etc. Anyways, have about 30 small XP VM's running on it and starting to get some very slow boot times and other performance issues. I THINK its I/O but looking at the graphs not too sure what to look for. Any ideas on what to look for would be appreciated. Here is the data I've got so far: (I feel like my IO is high but not sure what to bench it against)

    Read the article

  • RAID options for a LAMP web server

    - by jetboy
    I'm due to set up a LAMP web server with four drives and a RAID controller to act as a web server. The drives are 146Gb SAS, and the machine has two quad core processors and 16Gb RAM. There will be very few write operations to the MySQL database, and I'll be using as much caching as possible to reduce disk I/O. Question is: Would I be better off splitting the drives into two RAID 1 arrays, splitting up sequential and random disk I/O, or would I get better overall performance putting them all in a single RAID 1+0 array?

    Read the article

  • Drivers not installing and drives not being recognized

    - by jab818
    Dell optiplex 755 running win7-32 Two problems, not sure if they're related 1: Two drivers are missing when viewing device manager, PCI serial port and PCI Simple Communications Controller, I've searched dell's site, and the internet as a whole and have been wholly unable to find the drivers. 2: I'm unable to connect any external hard drives, but any flash drives plugged in will be recognized and accessible by the computer without issue. Any help would be appreciated.

    Read the article

  • wds 2 NIC dhcp error

    - by Xaver
    i have two network interface controllers on client pc. i have a wds server. when i load from pxe on client computer: 'WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment'. I think my client try get ip adress to network interface controller which not connected to lan. How to avoid this error?

    Read the article

  • How to set the SPN for Postgres SSPI

    - by chotchki
    I am trying to setup Postgres to support SSPI/Kerberos, however I think that I have not found out what the correct SPN that is needed to get it working. The background details: Service account for postgres: 'postgres' Domain Name: 'testdomain.com' Domain Controller: 'dc.testdomain.com' I have tried the following SPNs and have had zero luck: setspn -A HOST/testdomain.com postgres setspn -A HOST/testdomain postgres setspn -A POSTGRES/testdomain.com postgres setspn -A POSTGRES/testdomain postgres setspn -A POSTGRES/dc.testdomain.com postgres Does anyone have some suggestions?

    Read the article

  • Adding a 2008 R2 DC to a SBS2003 R2 domain

    - by ITGuy24
    I am planning on adding a Windows Server 2008 R2 box as a second domain controller for a client running an SBS 2003 R2 domain and have two questions. Are there any "gotchya's" involved in doing this, or do I just run ad and forest prep, promote the 2008 R2 box? How would CALs work with this setup? Would I need SBS 2008 CALs, Server 2008 CALs or would the old SBS 2003 CALs cover this setup? My thinking is I will only need Server 2008 CALs

    Read the article

  • How to setup equivalent USVIDEO.ORG DNS-Proxy on Linux

    - by Gary
    I have a VPS in the USA running Ubuntu. I want to setup something similar to http://www.usvideo.org Basically, USVIDEO is a DNS service that allows Canadians to access American content like Hulu, Netflix, NBC, and etc (restricted by geographical IP). Here is how I think USVideo does it: Clients (PS3, XBOX, PC) specifies the DNS server(s) as specified on USVIDEO.org's website. If the DNS request is a video/audio site such as Netflix or Pandora, forward the request to a proxy. Otherwise, for all other requests, forward it to a different DNS server. If the specific video/audio URL is requested, return the address of the proxy server, which in turn relays traffic to the destination video/audio domain via the U.S. gateway so that it appears that the access is coming from a U.S. IP address. Once the DNS request has passed the U.S. IP address check, their proxy server steps out of the loop and lets the video streaming site contact you directly to start the video stream. This trick relies on the way that the video streaming sites check the country of your IP address once up front, but don't actually check the country of the destination IP address while the video is streaming. What is elegant about this solution is that a VPN Tunnel is not required to bypass geographical IP checks from certain websites. All that is required on the client side is to specify the DNS server (the VPS). If a certain site is geographically locked, just forward the traffic to a proxy, and that's it. These sites can be specified in the DNS entries, or perhaps in the proxy service to redirect the DNS request to its own proxy. I believe what I need to setup something similar is Squid Proxy, IPTables, and DNS. What I need help is how to exactly approach this? Would Squid Proxy be setup as a transparent proxy?

    Read the article

  • SCSI drives not showing up in Linux CentOS 4

    - by Mohammad
    So I have a poweredge 6650 with Perc 3 installed. on the first channel of raid controller I have 2x 73gb configured in raid 1. On the second channel I have two 300GB drives that are stand alone. The two 300gb drives do not show up in linux, (no /dev/sdb*)... Can perc 3 support non-raid and raid drives combined? Is there any settings I may be missing? Thanks in advance :)

    Read the article

  • Eyefinity resolution on third monitor

    - by Sam2299
    I'm now using three monitors with resolution capability of 1920x1080. The one monitor connected to Active Display Port is (from some reason) limited to 1440x900. Is there a way to increase the resolution of the third monitor to have all three at 1920X1080? My machine: Graphics card - AMD 5770 Processor - Intel Core i7-2600 Ram - 8GB OS - Windows 7 64bit. VGC(Video Graphics Controller) driver is up to date. Got this message:

    Read the article

  • Wireless not working on ubuntu 12.04

    - by Yosef
    I just install ubuntu 12.04 but wirelless not works(windows 7 wirelless works). I open my windows 7 and see under Network Adapters: Edimax 802.11n Wireless Adapter Realtek PCIe GBE Family Controller Which drivers i should download to install them on ubuntu 12.04 to make wireless work? And how i install this drivers on ubuntu after i copy them to usb. (I can have only wireless connection not wire - soo i nhave to dowload the drivers with windows then copy them to ubuntu) Thanks

    Read the article

  • Dirty Cache Dell Equallogic Storage Array

    - by Jermal Smith
    has anyone ever run into a dirty cache issue with a Equallogic SAN. Even after replacement of the controller cards in the Equallogic Storage Array fails offline with a dirty cache. I have listed steps here on my blog to bring the SAN online again, however this is not the best solution as it continues to fail. http://jermsmit.com/dirty-cache-dell-equallogic-storage-array/ If you have any info on this please share. Thanks, Jermal

    Read the article

  • Active Sync Login Time Restriction

    - by Hovaness Bartamian
    Is there any other location restricting a user from accessing their emails from their phone using active sync, besides on a domain controller -active directory-user properties - account - logon hours. The user's logon hours are allowed all the time. To add to the mystery the user is an admin on the domain.(He seems not to be able to get emails from 7:00pm to 8:00pm) Its a Windows 2003 Server environment. Thanks for any help ahead of time.

    Read the article

  • SAS Array with or without expander

    - by tegbains
    Is it better to use a SAS Expander backplane for 12 drives via one SAS connection or is it better to use a SAS backplane with 3 SAS connections? This is in terms of performance, rather than expansion. This array will be setup using ZFS on a OpenSolaris via a LSI SAS controller as an iSCSI target. The two products being considered are the SuperMicro SuperChassis 826A-R1200LPB or the SuperChassis 826E2-R800LPB

    Read the article

  • Lync server 2010 Active Directory Preparation with a Windows Server 2003 DC

    - by juFo
    I'm trying to install Lync server 2010 but i'm stuck for a while now with the "Active Directory Preparation" part of the Lync server 2010 installation. The "Prepare Schema" fails with the following error: "Step 1: Prepare Schema Run once per deployment. Extends the schema for Lync Server. Not Available: Failure occurred while attempting to check the schema state. Please ensure Active Directory is reachable." screenshot: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 The situation: 1 server with Windows Server 2003 (x86), which is the only Domain Controller (DC) 1 server with Windows Server 2008 R2 (x64) where Lync should be installed. First I have found that the DFL/FFL were not correct: On the DC (server2003) I have changed the Domain Functional Level to Windows Server 2003 and also the Forest Functional Level to Windows Server 2003. If I check these settings on the Server2008 with Active Directory Domains and Trusts, I see indeed that the DFL and FFL are being set to Windows Server 2003. (Windows Server 2003 is the minimum required for Lync server 2010) I tried the Lync AD Preparation again but still got the same message: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 I'm logged in on the Server2008 and Server2003 with the domain administrator account. If I check "Active Directory Users and Computers" and go to the directory Users and watch the properties from the Administrator User then it is also a Member of: Domain Admins Domain Users Enterprise Admins Schema Admins Group Policy Creator Owners The firewall on the server2008 is turned off, still nog working So now my question is: what should I do to make the Lync setup (Active Directory Preparation) work? (I would appreciate clear step-by-step suggestions to check.) Thanks in advance. Update 1: Now I've extended AD successfully on the 2003 DC, using this link: http://blogs.pointbridge.com/Blogs/sloan_jason/Pages/Post.aspx?_ID=2 but when I check the Active Directory Preparation again on the Lync install, it still gives me the same error as in the screenshot I've provided. Update 2: I found out that there is a log on "C:\Users\\AppData\Local\Temp\ with this: Get-CSDomainState Get Domain State Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.NoSuitableServerFoundException" "No suitable domain controller was found in domain "OurDomain.LOCAL". Errors:\r\n"OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790) Service Pack1OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790)Service Pack 1"" I thought Lync could be installed with a Windows Server 2003 (according to the documentation on technet) and it doesn't require a SP. :s

    Read the article

  • Install SAS/SATA backplane in Dell PowerVault 220S

    - by e151280
    Is the backplane of a Dell PowerVault 220S svc tag 3sdpcb1 (14 drive, 80 pin hot swap scsi) upgradeable to a SAS/SATA backplane & controller card replacement? The unit already seems to be quite modular, with slide-out replaceable scsi controllers/connectors on the back, and slide out redundant power supplies. With everything else so modular, the backplane would seem to be the next logically upgradeable part of this unit. Thanks in advance for your input

    Read the article

  • How do I use Group Policy on a domain to delete Temporary Internet Files?

    - by Muhammad Ali
    I have a domain controller running on Windows 2008 Server R2 and users login to application servers on which Windows 2003 Server SP2 is installed. I have applied a Group Policy to clean temporary internet files on exit i.e to delete all temporary internet files when users close the browser. But the group policy doesn't seem to work as user profile size keeps on increasing and the major space is occupied by temporary internet files therefore increasing the disk usage. How can i enforce automatic deletion of temporary internet files?

    Read the article

  • hardware raid0 to software raid0

    - by Frankie
    Does anyone know if it's possible to switch from a hardware based RAID0 to a software one? Have a broken raid controller (vintage, wont find it anywhere) but I know the Array is in good conditions. Has anyone tried this, and/or know if its possible? Thank you for your time.

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >