Search Results

Search found 11166 results on 447 pages for 'justin standard'.

Page 203/447 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• Upgrading my Active Directory domain from Server 2003 to Server 2008 R2

  - by drpcken

  We are currently a single domain on a single network running Server 2003 Standard and Exchange 2007. I have a new server up and running (added to the domain already) with Server 2008 R2 on it. I want this to become my Primary Domain Controller, thus replacing my old Server 2003 server. I know I should just be able to run dcpromo on the new server, then decomission my old server, and raise my domain functional level to match the 2008 server. My only concern is the Exchange 2007 server. Is there anything I need to know relevant to it before I start? Thanks!

  Read the article

• Running command transparently over ssh

  - by jnsg

  By transparently I mean forwarding of: stdin, stdout and stderr standard signals (SIGHUP or SIGINT would be great for a start) As an example, consider these invocations of a (pointless) local and remote command: $ `cat - > /dev/null; sleep 10` < /local/file $ ssh user@host "cat - > /dev/null; sleep 10" < /local/file I can interrupt the first one with ^C just fine. But if I try this during the second one it only affects ssh, leaving the command running on the remote server if cat has already finished. I know about launching sshwith -t, but this way I can't send data via stdin. Is this possible with ssh alone at all?

  Read the article

• Snow Leopard .htaccess issue

  - by Joe.Cianflone

  Hello, I'm running into an issue on Snow Leopard. I am just using the standard Apache2 that came with it but it doesn't seem to want to use my .htaccess file. Here is the appropriate part of my httpd.conf file: <Directory /> Options FollowSymLinks AllowOverride All AuthConfig Order deny,allow Deny from all </Directory> And here is my .htaccess file: Options +FollowSymlinks RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php/$1 [L,QSA] I'm sure I'm doing something stupid, but at this point, I just cant see it! All it's doing is allowing me to not have the index.php file, this worked on Leopard and isn't working in Snow Leopard. What am I missing? Thanks Joe C

  Read the article

• PDF booklet printing

  - by Diego

  I have a Samsung ML-2851nd printer (laser, duplex) When printing booklets from PDF files, what is best? Printing with "standard" Page Scaling from Reader, and selecting Booklet printing from the Printer Properties Using the Booklet Printing option from Reader, and only selecting "Print on Both Sides" in the Printer Properties. If I go with the first option, can I use Page Scaling "None" to get bigger text or will it cause any problems? (Fit to printable area shrinks to 93%, I'm using A4 paper) If I go with the second one, what's the correct setting: "Flip on Long Edge" or "Flip on Short Edge"? Thanks!

  Read the article

• How to setup a simple self-hosted dynamic DNS server

  - by Cerin

  I have a small internal network of physical machines running hypervisors, which in turn run several KVM Ubuntu virtual machines. How would I setup an internal dynamic DNS server so that when I run a script to create a new virtual machine, that VM could automatically register itself in the DNS server? Bind seems to be the standard DNS server for Linux, but it seems designed for a much more "static" DNS model. Dynamically updating this would require a complicated script that would have to SSH into the DNS server, edit configuration files, and then restart the server. This doesn't seem like a very elegant solution. Are there better options? I saw a similar question, although they're asking for a solution for a public setting on Amazon. My servers are entirely private, and I don't want to rely on an external VM host or Dynamic DNS provider.

  Read the article

• Thin virtual host

  - by Adam Ryczkowski

  My work setup relies on old Windows XP. Now, when Windows XP isn't supported by new hardware, it's getting harder and harder to buy a notebook on which Windows XP can run natively with all essential hardware (wireless cards, graphics, sound etc). Since I don't expect my personal setup to turn away from Windows XP any time soon, I'm investigating the following trick: why not buy any decent hardware which Linux can fully utilize, and use it as a virtual host for a guest session with e.g. Windows XP. I like using hibernation, so I prefer this Linux to be as thin as possible, only enough to support VirtualBox, KVM or any other virtualization software. Question: Are there any "standard" ways to do this, like Linux distributions aimed specifically on being light virtualization host?

  Read the article

• Rails deployment questions

  - by Meltemi

  Getting ready to deploy a rails project on Mac OS X Server (10.5 - Leopard). Got a few questions for someone with Rails experience: where should directory containing the project go? inside the website's root folder or out? who should "own" that directory? www? root? something/someone else? hope to continue serving static pages via Apache... would like rails app to be served by mydomain/xxx/railsapp. is there a standard name people us for 'xxx'? not expecting too much traffic to begin with...just like to keep things as simple as possible.

  Read the article

• Windows shared printers: Process job on server machine, not the client

  - by asr

  Hi. While working with Linux clients to Windows SMB/CIFS filesharing servers, from time to time I find myself having to print to a printer with no drivers available under Linux. For some reason, the Windows computer expects the job to be sent in an already processed format, so it can be fed directly to the printer in its own, weird language. It would be great if I could send the print job in Postscript or other standard format to the Windows computer sharing this printer, and then this PS could be processed under Windows. Is there a way to accomplish this? Because I don't seem to find the option. Thanks a lot.

  Read the article

• Using XFCE4 with awesome

  - by whitequark

  When I got tired of using the standard XFCE window manager, xfwm, I simply installed openbox and selected "XFCE/Openbox" session in the GDM login screen. This was very convenient because I didn't want the plain Openbox session in which there are no network-manager, no panels, nothing. Now I have installed awesome: I really like the idea of tiling window managers. But after I launched it, everything went wrong. Absence of XFCE panels isn't anything bad, but subpixel-aliased fonts were somehow turned on, and that was really awful. I tried to login in XFCE, kill openbox/xfwm and start awesome, but that didn't worked: xfce4-session keeps restarting it's predefined WM, and killing it kills the whole X session too. And I didn't found the configuration for a dropdown list in GDM either. How can I start XFCE session with awesome as a WM?

  Read the article

• Installing/Uninstalling Windows 8 UI Apps in Windows 8 for all users

  - by Donotalo

  I'm using Windows 8 Pro 64 bit quite a while now. My account is the only Administrator account on the PC. There are 2 other standard (and local) accounts. I've noticed that if I install an app from Windows Store, that app is only available from my start screen. Also when I uninstall an app that's common for all users (e.g., Finance), it only uninstalled from my account. I want to install app and want it to be available for all users. When I'll uninstall an app, it should be removed for all users. No other user should have access to it. Just like installing/uninstalling programs on previous versions of Windows. How can I do that?

  Read the article

• Windows Scheduled Tasks losing password configuration

  - by E Brown

  I have a couple of jobs scheduled to run daily on a customer server running Windows Server 2003 Standard Edition, SP1 using Windows Scheduled Tasks. The tasks are set to run as a user that is in the Administrators group, and were scheduled as that same user. The password of that user is set to never expire. These tasks fail to run pretty much every day. Going into Scheduled Tasks and attempting to run the tasks manually indicates that the password is incorrect. I go into the task properties, retype the password into the appropriate fields, click OK, and attempt to run the task manually again. Now it works fine. What might be the cause of the password being lost like this? These same tasks are running on other customers servers with no problems. Thanks in advance for any thoughts.

  Read the article

• Linux. Compare binary files

  - by frustratedCmpNoLongerUser

  I need to compare two binary files and get output in form for every different byte. So if file1.bin is 00 90 00 11 in binary form and file2.bin is 00 91 00 10 I want to get something like 00000001 90 91 00000003 11 10 what is the easiest way to accomplish the goal? Standard tool? Some 3rd party tool? inb4: cmp -l should be killed with fire,it uses decimal system for offsets and octal for bytes. "Consistency for losers" must be cmp's motto.

  Read the article

• Windows 2008 R2 DS in 2003 domain?

  - by 3molo

  Hi, Having a master domain controller running Windows 2003, and now I'd like to set up a new domain controller on a branch office. I really only have access to licenses for Windows 2008 R2 (through licensing.microsoft.com), so question is if a newly installed Windows 2008 Standard R2 can become a domain controller in the existing (2003) domain? First I tried adprep /forestprep on the newly installed 2008, but it complained about not being a domain controller. I then tried dcpromo, but it too complained about it. According to MS documentation, it seems I have to run 'adprep /forestprep' on the master domain controller, and adprep is located in 2008 installation DVD. Am I on the right track? Is the correct way to mount the 2008 installation dvd into the existing 2003 master controller, and run 'adprep /forestprep' on it there? Will I be able to run dcpromo on the 2008 once that has been completed? Thanks,

  Read the article

• Case for Micro SD card?

  - by Josh

  I have a MicroSD card which I'd like to keep with me at all times, I.E. in my wallet. I'm looking for a case for it. But all the cases I can find seem to be for standard SD cards... the closest I could find was this: Which is completly pointless, it stores the Micro SD card along with it's adaptor. Why not just put the Micro SD card IN the adaptor and store both on a normal SD card case... Anyway, does what I'm looking for (a case to protect a microSD card, and only large enough for a mircoSD card, i.e. not what's pictured above) exist?

  Read the article

• Western Digital My Book World drops off network

  - by Macha

  Most of my storage in my house relies on a WD My Book World Edition 500GB network drive. I threw out the vendor crapware they give you to access it (a trial version of Mionet) after it starting nagging me to upgrade, and set it up as a standard network drive using Window's Map Network Drive. However, since then, it has been dropping off the network after 30 minutes of non-usage. The only way to get it back on is to switch it off and on again at the plug socket. Does anyone know what is causing this, and hopefully how to fix it? EDIT: it's the original "blue rings" version with the latest firmware.

  Read the article

• Has there been a Firefox update recently?

  - by Rob Nicholson

  Trying again to ask a PROGRAMMING question because of the over-zealous closing off of what is equally a programming question before allowing the poster to clarify. The latest version of Firefox (v3.6.3) is breaking websites, mine included. I make heavy use of the Infragistic NetAdvantage controls. These, because of their heavy JavaScript reliance and occasional lack of quality control, tend to suffer through browser updates sometimes requiring a hotfix. So the question is... has there been a Firefox release recently that has either introduced a bug, tightening up of some standard, bug fix which might have broken a previous workaround (often the case) etc? I'm guessing around JavaScript but that's a guess hence the reason for asking a group of programmers...

  Read the article

• Could not retrieve backup settings for primary ID in Log shipping

  - by user1723139

  I am doing log shipping between two Amazon EC2 instances running Windows Server 2008 R2 with SQL Server 2008 R2 standard edition. Both the instances are in the same domain and I can access the shared folders between the instances. The SQL server service account, agent service account are all running under a domain account. When I activate log shipping (with stand by mode restore in secondary server), the initial backup gets restored on the secondary. After that the backup operation is getting failed and i get the following error message: *** Error: Could not retrieve backup settings for primary ID 'xxxxxx-xxxx-xxxx-xxxx-4d772cd7337e'.(Microsoft.SqlServer.Management.LogShipping) *** *** Error: Failed to connect to server IP-0A7653F2.(Microsoft.SqlServer.ConnectionInfo) *** ****** Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server.******** **The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(.Net SqlClient Data Provider) *** **----- END OF TRANSACTION LOG BACKUP -----**** Any ideas?

  Read the article

• Problems installing Linux to IDE connected compact flash card

  - by mathematician1975

  I have been trying to install Ubuntu on some hardware (Netcom NC-499 board that contains a Vortex86DX processor). I am trying to install to a compact flash card attached to the board via an IDE adaptor, the aim being that the board will boot up and simply treat the compact flash like a normal hard drive. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it onto the card. I have been trying using a USB CD-ROM drive and the standard .iso image from the ubuntu site (md5 checksum works out fine so no problem there) but I have had no success at all. I have been able to do this with Ubuntu 8.04 but with no other version (9.04 and 10.04 desktop and alternative discs all fail). My question is what other options are available to me to try and install this? I have googled myself apart trying to find out but other than a few sites describing USB based installs using flash memory sticks for very specific hardware, I have found no useful info at all. Any suggestions will be gratefully received.

  Read the article

• Building computer: Casing for peripheral sockets is a pain!

  - by burnt1ce

  I have a casing the covers the spacing between the peripheral socket which is standard to have when you buy a motherboard. My problem with these covers is that they have spokes that pushes the motherboard away so the sockets don't even come out of the covers. This also misaligns the screws on my atx motherboard with the holes in my computer case. I usually break these spokes so that i can align my motherboard correctly. Why the heck do motherboard manufacture put spokes on these covers? am i using them wrong? UPDATE Here's an image that i found that shows the plastic casing. http://z.about.com/d/pcsupport/1/5/m/-/-/-/tour%5Fexternal.jpg You can even see the indentation that makes the spokes that pushes the motherboard inwards.

  Read the article

• How do I make vim's autoindent not drop trailing spaces?

  - by Joey Adams

  In some text editors (e.g. Kate, gedit), when auto indent is enabled, pressing return twice will leave a trailing whitespace (which I want): if (code) { .... ....| } While others cater to the coding standard where trailing spaces (even in blank lines) aren't allowed: if (code) { ....| } What annoys me about this is that if I arrow up after auto-indenting, the auto-indent is lost: if (code) { | .... } If I run vim and :set autoindent , I get the latter behavior. My question is, how do I set vim to keep the trailing spaces rather than automatically removing them if they go unused?

  Read the article

• Slow IE8 Start-up due to LDAP DNS queries

  - by MikeJ-UK

  Recently (in the last few days), my installation of IE8 has been taking 15 to 20 seconds to load my home page. Specifically, the sequence of events (as reported by WireShark) is:- Browser issues a DNS A query to resolve the home page server's IP address. Browser then spends the next 15-20 seconds broadcasting DNS SRV _LDAP._TCP queries, (roughly on a 2 second tick) to which it receives no answer (we have no LDAP servers). Browser re-issues the DNS A query and resolves the server's IP address again. Finally, the browser issues an HTTP GET for the home page. Does anyone know why this is happening? Possibly related to this question EDIT: @Massimo, LDAP query is :- Domain Name System (query) Transaction ID: 0x11c5 Flags: 0x0100 (Standard query) Questions: 1 Answer RRS: 0 Authority RRS: 0 Additional RRS: 0 Queries _LDAP._TCP: type SRV, class IN Name: _LDAP._TCP Type: SRV (Service location) Class: IN (0x0001)

  Read the article

• Why is my drive so full on my Windows 2008 Server

  - by Zee Tee

  My server is Windows 2008 R2 Standard Server. I have a secondary SAS drive where all my website files are with the following properties: NTFS File System Allow files on this drive to have contents indexed in addition to file properties IS CHECKED Simple Layout Basic Type Healthy (Page File, Primary Partition) Status I have 3 folders on this drive: Folder 1: 4GB Folder 2: 2GB Folder 3: 20GB (These are the sizes of them when I click properties) But the drive says it only has 10GB left out of 65GB. Why? I'm trying to make more room on this drive.

  Read the article

• CruiseControl.Net - not able to see Project Statistics

  - by Anders Juul

  Hi all, I've made a reinstallation of the buildserver and can no longer see the standard graphs of project statistics. The error message shown is "Missing/Invalid statistics reports. Please check if you have enabled the Statistics Publisher, and statistics have been collected atleast once after that." To the best of my knowledge, the ccnet.config file has not been changed in this respect and by inspection it is verified that I have a Statistics / statisticsList-section for the project. Furthermore, the values appear in the Artifacts\statistics.csv and Artifacts\report.xml files. My guess would then be StatisticsGraph.xslt, which I have copied fresh from distribution to both Server\xlst and WebDashboard\xslt (why are they located in both places, by the way!?). Rebuild and check - still same error message. Any hints to how to debug this would be appreciated!

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendati

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• Thin virtual host [migrated]

  - by Adam Ryczkowski

  My work setup relies on old Windows XP. Now, when Windows XP isn't supported by new hardware, it's getting harder and harder to buy a notebook on which Windows XP can run natively with all essential hardware (wireless cards, graphics, sound etc). Since I don't expect my personal setup to turn away from Windows XP any time soon, I'm investigating the following trick: why not buy any decent hardware which Linux can fully utilize, and use it as a virtual host for a guest session with e.g. Windows XP. I like using hibernation, so I prefer this Linux to be as thin as possible, only enough to support VirtualBox, KVM or any other virtualization software. Question: Are there any "standard" ways to do this, like Linux distributions aimed specifically on being light virtualization host?

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >