Search Results

Search found 660 results on 27 pages for 'canonical'.

Page 21/27 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Can't install software from Ubuntu software center

  - by Casbar

  I've been experimenting with Ubuntu 10.04(64bit) inside a VirtualBox VM. This isn't my first experience with Linux, but I'm still very much a Linux noob. Whenever I try to install software from the Ubuntu Software Center, the installation gets interrupted and I get a warning that this installation requires untrusted sources. I can install anything I want using apt-get, it's just the gui that doesn't work. I've done research on the issue and taken the following precautions with no result: under software sources Allowed Canonical partners Allowed source code Changed the download source to main server I get no errors when running an apt-get update. Can anyone shed some light on the issue?

  Read the article

• Difference between SSLCertificateFile and SSLCertificateChainFile?

  - by chrisjlee

  Normally with a virtual host an ssl is setup with the following directives: Listen 443 SSLCertificateFile /home/web/certs/domain1.public.crt SSLCertificateKeyFile /home/web/certs/domain1.private.key SSLCertificateChainFile /home/web/certs/domain1.intermediate.crt From: For enabling SSL for a single domain on a server with muliple vhosts, will this configuration work? What is the difference between SSLCertificateFile and SSLCertificateChainFile ? The client has purchased a CA key from GoDaddy. It looks like GoDaddy only provides a SSLCertificateFile (.crt file), and a SSLCertificateKeyFile (.key file) and not at SSLCertificateChainFile. Will my ssl still work without a SSLCertificateChainFile path specified ? Also, is there a canonical path where these files should be placed?

  Read the article

• Can too many 301 redirects cause a DNS error?

  - by Graham

  For a site http://imageocd.com that I just set up I initially spelled the category "automobiles" as "autimobiles"... I know it's rediculous. I then set up over 10,000 pages behind that category e.g. http://imageocd.com/automobiles/hillman-minx-cabrio-pictures-and-wallpapers. So, I set up over 10,000 301 url redirects to change the spelling on automobiles. I just checked my Google Webmasters report and got an error saying: http://www.imageocd.com/: Googlebot can't access your siteSep 7, 2012 Over the last 24 hours, Googlebot encountered 2 errors while attempting to retrieve DNS information for your site. The overall error rate for DNS queries for your site is 66.7%. Could the overabundance of 301 redirects be causing this? I host 13 sites on this dedicated server and all sites are running fine. I also contacted GoDaddy and they said the server is running fine. Any ideas on what might be going on? Also, I have "canonical" set up for every URL. Could this be part of the error? Thanks.

  Read the article

• Use Google Apps/Cloud Services as a Domain Controller Replacement

  - by user124548

  This is a Canonical Question about Cloud Services replacing Active Directory. Is it possible to use Google Apps or another Cloud Service as a replacement for a Windows Domain Controller (replacing my whole AD infrastructure)? Specifically, I want to remove our dependence on a local Windows Server; currently it acts as a Domain Controller with File and Print Services. I'd like to seamlessly replace this server with something based on hosted applications. I do not just want to move the server to a dedicated or collocated server. I have yet to figure out how to piece together printer/etc sharing. If anyone has any insight into this, it would be appreciated. The goal is to eventually move all my servers to the cloud then write up a case study on the whole affair.

  Read the article

• Installing ubuntu server as linux distro on dell server - what drivers will be missed

  - by Cookie

  Dell (via USC) unpacks specific drivers for both RedHat and Suse to use after installation on its servers. As Ubuntu server isn't officially supported, this clearly isn't happening for Ubuntu. Is Ubuntu server then running with native drivers? In that case, which drivers are native with Ubuntu, and aren't (e.g. are Dell replaced) with RedHat/Suse? Are dell optimized drivers available for Ubuntu somewhere? Can the ones for RedHat or Suse be used with Ubuntu? Are there disadvantages of this lack of fine-tuned drivers, and if yes, what are they? Would they make the switch (and extra costs, as both RedHat and Suse Enterprise aren't cheap) away from the free Ubuntu server worthwhile? Dell recommends Canonical's commercial support for Ubuntu server on its machines, is this recommendable? Do they offer fine-tuned Dell drivers to replace native drivers?

  Read the article

• Where to find information about ubuntu compatible or certified hardware/PC models

  - by Halkinn

  I am buying a new desktop PC in early 2013, anyway this question should apply to someone intending to buy a new laptop/ultrabook as well. This machine is not meant for gaming, and if I ocasionally do it, I can survive with minimum graphics. However I may need some heavy multimedia edition or multitasking at times, so basically my greatest priority is a good processor, after that perhaps average graphic card (if onboards are not enough, I am still not informed enough about that), at least 4GB of RAM with possibility of expansion. I know there are some PC models specially designed to ship with Ubuntu, which is the OS I use the most these days. However, most people around me use Windows and some software with unsupported versions for Linux and not having a Windows license becomes a bit problematic. Given that, I would like to find information about which PC models or even manufacters currently on the market have the best compatibility with Ubuntu, I am still undecided between building my own desktop or buying a pre-made model, so I would like to find information both for certified models and certified hardware or even Ubuntu partners that may work closely with Canonical. Where to find this information in order to make sure that I will have a good experience with Ubuntu on my new PC in the years to come?

  Read the article

• after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

  - by Ricardo

  After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

  Read the article

• Why does yum index get corrupted?

  - by TomOnTime

  Occasionally yum's cache gets corrupted and we see errors like this: error: db3 error(-30974) from dbenv->failchk: DB_RUNRECOVERY: Fatal error, run database recovery error: cannot open Packages index using db3 - (-30974) error: cannot open Packages database in /var/lib/rpm The workaround is rm -f /var/lib/rpm/__db* and then the next "yum" command regenerates the data. My question is: what is likely to be causing this? Is there some common task that ignores locks or has other problem that causes this? We have hundreds of CentOS machines and there is no pattern to which see this problem. It could be a "one in a million" issue, which at large scale is seen often. NOTE: I realize this is a very "open ended" question, but if an answer finds the cause, I will go back and turn the question into something more canonical that directly relates to the specific issue.

  Read the article

• File type actions for ruby scripts

  - by Kovags

  Hello, I just installed the Ruby interpreter and created the file test.rb. In the Folder Options, I created the rb file type and an action called Run and assigned the application C:\Ruby192\bin\ruby.exe "%1"" So It's possible for to get into the Windows XP command line and run the script simply by doing this: C:\>test.rb But when I need to send parameters to the script, I can't simply do the following: C:test.rb parameter1 parameter2 I'll have to do the following instead: C:\Ruby192\bin\ruby.exe c:\test.rb parameter1 parameter2 I just noticed that I'm able to edit the action the following way to pass more parameters: C:\Ruby192\bin\ruby.exe "%1" "%2" "%3"" That allows me to give 2 parameters to the script, but for some cases I need to pass a handful of parameters and it doesn't seem right for me to append "%5" "%6" "%7" ad nauseam. What's the canonical way to do it?

  Read the article

• ubuntu 13.10 liveboot/installer loads dots, then does nothing

  - by user200245

  Problem: When I load an Ubuntu 13.10 (64-bit) live USB / installer on my laptop, the purple Ubuntu screen with the white dots appears, the dots turn orange (indicating its loading), then after a few seconds the screen turns completely black and nothing else happens. I can not install Ubuntu 13.10 on this computer. What I've Tried: I've re-downloaded the .iso file from canonical. I've burned the .iso to the USB using the default linux usb image writer, and the Windows programs YUMI and Linux Live USB Creator; same thing happens each time. Yes, I'm sure my computer is 64 bit. I'm currently running Linux Mint 15 on it, which runs perfectly. It's a Sager NP7330 / Clevo w230st. extra info A few months I installed Ubuntu 13.04 on this machine, which installed perfectly. Normally I'd install that then dist-upgrade to 13.10, HOWEVER this computer is only a few months old and the wireless/network drivers for my network card were not implemented until kernel 3.11 (which comes w ith 13.10). I tried manually downloading kernel 3.11 and installing it (on 13.04), however the wireless card nor ethernet card still did work with Ubuntu 13.04. So my only real hope is to get 13.10 working. Does anyone know what's up with this?

  Read the article

• Using Subdomains for Newly Regional Company

  - by Taylord22

  The company I work for is expanding their business to new territories. I've got a lot of stabilization to do in the region/state where we're one of the most well known companies of our kind. Currently, we have 3 distinct product lines which are currently distinguished by 3 separate URLS. This is affecting the user flow of our site, so we'd like to clean it up before launching our products into the various regions. The business has decided to grow into 5 new states (one state consisting of one county only) — none of which will feature all 3 products. Our homebase state is the only one that will have all 3 products this year. My initial thought was to use subdomains to separate out the regions, that way we could use a canonical tag to stabilize the root domain (which would feature home state content, and support content for all regions), and remove us from potential duplicate content penalization. Our product content will be nearly identical across the regions for the first year. I second guessed myself by thinking that it was perhaps better to use a "[product].root/region" URL instead. And I'm currently stuck by wondering if it was not better to build out subdomains for products and regions...using one modifier or the other as a funnel/branding page into the other. For instance, user lands on "region.root.com" and sees exactly what products we offer in that region. Basically, a tailored landing page. Meanwhile the bulk of the product content would actually live under "product.root.com/region/page". My head is spinning. And while searching for similar questions I also bumped into reference of another tag meant to be used in some similar cases to mine. I feel like there's a lot of risks involved in this subdomain strategy, but I also can't help but see the benefits in the user flow.

  Read the article

• Features of Emacs that are complementary to Vim?

  - by redacted

  I've been using Vim extensively for a while now, and I really enjoy working with it. However, I keep reading praises for Emacs. I've decided to take a look at Emacs to round out my knowledge of the Unix editors (not to mention Emacs keybindings are used extensively). But! I'm happy doing most of my daily work in Vim. So ideally what I'd like is to look at (apart from basics) are the gaps that Emacs can fill, or things that it can just do better than Vim. I suppose the canonical example is Lisp/Scheme coding in Emacs versus Vim. Where would you start tinkering with Emacs to really appreciate its power, and to get a good idea of how its approach to editing differs from Vim, and how the editors can complement each other? What would be a good introduction in the same vein?

  Read the article

• Attempt at Merge Sort: Is this correct? [migrated]

  - by Beatrice

  I am trying to write a merge sort algo. I can't tell if this is actually a canonical merge sort. If I knew how to calculate the runtime I would give that a go. Does anyone have any pointers? Thanks. public static void main(String[] argsv) { int[] A = {2, 4, 5, 7, 1, 2, 3, 6}; int[] L, R; L = new int[A.length/2]; R = new int[A.length/2]; int i = 0, j = 0, k; for (k = 0; k < A.length; k++) { if (k < A.length/2) { L[i] = A[k]; i++; } else { R[j] = A[k]; j++; } } i = 0; j = 0; for (k = 0; k < A.length; k++) { System.out.println(i + " " + j + " " + k); if (i < L.length && j < R.length) { if (L[i] < R[j]) { A[k] = L[i]; i++; } else { A[k] = R[j]; j++; } } } }

  Read the article

• Properties of bad fibonacci algorithm

  - by John Smith

  I was looking at the canonical bad fibonacci algorithm the other day: public static int fib(int n) { // Base Case if (n < 2) return 1; else return fib(n-1) + fib(n-2); } I made the interesting observation. When you call fib(n), then for k between 1 and n fib(k) is called precisely fib(n-k+1) times (or fib(n-k) depending on your definition of fib(0) ). Also, fib(0) is called fib(n-k-1) times. This then allows me to find that in fib(100) there are exactly 708449696358523830149 calls to the fib function. Are there other interesting observations on this function you know of?

  Read the article

• How to use Maven2 with Apache Sling?

  - by Jerome Baum

  Google doesn't help, neither does a stackoverflow.com search, and browsing through Apache Sling documentation doesn't show any solution so here goes: How can I best use Maven2 with Apache Sling? Basically as far as I see the entire application code will need to be placed in the JCR repository, but I need it versioned. There is some documentation about OSGi bundles that could contain resources, but isn't it kind of overkill to create a bundle with a bunch of Java code to talk to Sling when all I want to do is load some files to corresponding URLs? What I was hoping for is something like jetty:run that will automatically deploy a WAR into a new Jetty instance. Ideally the goal for Sling would run Sling and then load the specified content -- is there some Maven2 plugin for this right now? Or is the bundle-based solution the "canonical" way of doing this?

  Read the article

• Easiest way of unit testing C code with Python

  - by Jon Mills

  I've got a pile of C code that I'd like to unit test using Python's unittest library (in Windows), but I'm trying to work out the best way of interfacing the C code so that Python can execute it (and get the results back). Does anybody have any experience in the easiest way to do it? Some ideas include: Wrapping the code as a Python C extension using the Python API Wrap the C code using SWIG Add a DLL wrapper to the C code and load it into Python using ctypes Add a small XML-RPC server to the c-code and call it using xmlrpclib (yes, I know this seems a bit far-out!) Is there a canonical way of doing this? I'm going to be doing this quite a lot, with different C modules, so I'd like to find a way which is least effort.

  Read the article

• Can you help me think of problems for my programming language?

  - by I can't tell you my name.

  I've created an experimental toy programming language with a (now) working interpreter. It is turing-complete and has a pretty low-level instruction set. Even if everything takes four to six times more code and time than in PHP, Python or Ruby I still love programming all kinds of things in it. So I got the "basic" things that are written in many languages working: Hello World Input - Output Countdowns (not as easy as you think as there are no loops) Factorials Array emulation 99 Bottles of Beer (simple, wrong inflection) 99 Bottles of Beer (canonical) Conjatz conjecture Quine (that was a fun one!) Brainf*ck interpreter (To proof turing-completeness, made me happy) So I implemented all of the above examples because: They all used many different aspects of the language They are pretty interesting They don't take hours to write Now my problem is: I've run out of ideas! I don't find any more examples of what problems I could solve using my language. Do you have any programming problems which fit into some of the criteria above for me to work out?

  Read the article

• What is a NullReferenceException in .NET?

  - by John Saunders

  (I'm creating this separate question and answer because every question we get on NullReferenceException is really the same) I have some code and when it executes, it throws a NullReferenceException, saying, "Object reference not set to an instance of an object.". What does this mean, and what can I do about it? Note again, that this is a question meant to focus answers to the canonical "what is a NullReferenceException and why did I get one" question. I do know what a NullReferenceException is, as my answer below demonstrates.

  Read the article

• Things you should implement in your own programming language

  - by I can't tell you my name.

  I've created an experimental toy programming language with a (now) working interpreter. It is turing-complete and has a pretty low-level instruction set. Even if everything takes four to six times more code and time than in PHP, Python or Ruby I still love programming all kinds of things in it. So I got the "basic" things that are written in many languages working: Hello World Input - Output Countdowns (not as easy as you think as there are no loops) Factorials Array emulation 99 Bottles of Beer (simple, wrong inflection) 99 Bottles of Beer (canonical) Conjatz conjecture Quine (that was a fun one!) Brainf*ck interpreter (To proof turing-completeness, made me happy) So I implemented all of the above examples because: They all used many different aspects of the language They are pretty interesting They don't take hours to write Now my problem is: I've run out of ideas! I don't find any more examples of what problems I could solve using my language. Do you have any programming problems which fit into some of the criteria above for me to work out?

  Read the article

• How do I change a Git remote HEAD to point to something besides "master"

  - by jhs

  Short version: How do I set a Git remote's HEAD ref to point to something besides "master"? My project has a policy not to use a "master" branch (all branches are to have meaningful names). Furthermore, the canonical master repository is only accessible via ssh://, with no shell access (like GitHub or Unfuddle). My problem is that the remote repository still has a HEAD reference to refs/heads/master, but I need it to point to a different branch. This is causing two problems: When cloning the repo, there this, warning: remote HEAD refers to nonexistent ref, unable to checkout. That's confusing and inconvenient. The web-based code browser depends on HEAD as a basis for browsing the tree. I need HEAD to point to a valid branch, then.

  Read the article

• remove multiple training slashes mod_rewrite

  - by Boyan

  I know this question was asked a number of times on this site alone, but browsing through the relevant posts I couldn't find a solution. Trying to remove multiple trailing slashes after domain. The following mod_rewrite expressions seem to work for URLs such as http://www.domain.com//path1///path2////, but do not work for domain// DirectorySlash Off RewriteEngine on # Canonical fix RewriteCond %{HTTP_HOST} !^www.domain.com$ [NC] RewriteRule ^(.*)$ http://www.domain.com/$1 [R=301] RewriteRule ^/main.do http://www.domain.com/ [R=301,L] RewriteRule ^/index.jsp http://www.domain.com/ [R=301,L] # Remove bogus query strings RewriteCond %{query_string} q= [NC] RewriteRule (.*) http://www.domain.com/$1? [R=301,L] # Remove multiple slashes after domain - DOESN'T WORK!!! #RewriteCond %{REQUEST_URI} ^//+(.*)$ [OR] #RewriteCond %{REQUEST_URI} ^(.*/)/+$ #RewriteRule / http://www.domain.com/%1 [R=301,L] # Remove multiple slashes anywhere in URL RewriteCond %{REQUEST_URI} ^(.*)//(.*)$ RewriteRule . %1/%2 [R=301,L] # Externally redirect to get rid of trailing slash except for home page, ads RewriteCond %{REQUEST_URI} !^/ads/ RewriteRule ^(.+)/$ $1 [R=301,L] Your help is appreciated.

  Read the article

• remove multiple trailing slashes mod_rewrite

  - by Boyan

  I know this question was asked a number of times on this site alone, but browsing through the relevant posts I couldn't find a solution. Trying to remove multiple trailing slashes after domain. The following mod_rewrite expressions seem to work for URLs such as http://www.domain.com//path1///path2////, but do not work for domain// DirectorySlash Off RewriteEngine on # Canonical fix RewriteCond %{HTTP_HOST} !^www.domain.com$ [NC] RewriteRule ^(.*)$ http://www.domain.com/$1 [R=301] RewriteRule ^/main.do http://www.domain.com/ [R=301,L] RewriteRule ^/index.jsp http://www.domain.com/ [R=301,L] # Remove bogus query strings RewriteCond %{query_string} q= [NC] RewriteRule (.*) http://www.domain.com/$1? [R=301,L] # Remove multiple slashes after domain - DOESN'T WORK!!! #RewriteCond %{REQUEST_URI} ^//+(.*)$ [OR] #RewriteCond %{REQUEST_URI} ^(.*/)/+$ #RewriteRule / http://www.domain.com/%1 [R=301,L] # Remove multiple slashes anywhere in URL RewriteCond %{REQUEST_URI} ^(.*)//(.*)$ RewriteRule . %1/%2 [R=301,L] # Externally redirect to get rid of trailing slash except for home page, ads RewriteCond %{REQUEST_URI} !^/ads/ RewriteRule ^(.+)/$ $1 [R=301,L] Your help is appreciated.

  Read the article

• Creating a QLineEdit search field for items displayed in a QListView

  - by krunk

  I want to create a search field that filters the items shown in a QListView. Basically the user could type in "foo" and only items with "foo" in the DisplayRole are shown. I already have a few ideas on how to do this, but thought I'd ask those more experienced than I. My idea would be to use some signals and slots to set a filter in the QAbstractItem model and trigger an update() in the QListView. Are there any helper methods in QListView for filtering I may have missed? Is there a canonical way of handling this I haven't run across?

  Read the article

• How do I write a constant-space length function in Haskell?

  - by Bill

  The canonical implementation of length :: [a] -> Int is: length [] = 0 length (x:xs) = 1 + length xs which is very beautiful but suffers from stack overflow as it uses linear space. The tail-recursive version: length xs = length' xs 0 where length' [] n = n length' (x:xs) n = length xs (n + 1) doesn't suffer from this problem, but I don't understand how this can run in constant space in a lazy language. Isn't the runtime accumulating numerous (n + 1) thunks as it moves through the list? Shouldn't this function Haskell to consume O(n) space and lead to stack overflow? (if it matters, I'm using GHC)

  Read the article

• If you have an application localized in pt-br and pt-pt, what language you should choose if the syst

  - by Sorin Sbarnea

  If you have an application localized in pt-br and pt-pt, what language you should choose if the system is reporting only pt code (generic Portuguese)? This question is independent of the nature of the application, desktop, mobile or browser based. Let's assume you are not able to get region information from another source and you have to choose one language as the default one. The question does apply as well for more case including: * pt-pt and pt-br * en-us and en-gb * fr-fr and fr-CA * zh-cn, zh-tw, .... - in fact in this case I know that zh can be used as predominant language for Simplified Chinese where full code is zh-hans. For zh-tw, zh-hant-tw, zh-hk, zh-mo the proper code (canonical) should be zh-hant. In fact the question can be extended to: How to I determine the predominant languages for a specified meta-language? I need a solution that will include at least Portuguese, English and French.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27  | Next Page >