Search Results

Search found 27410 results on 1097 pages for 'output device'.

Page 21/1097 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• System says memory controller not available and doesn't boot?

  - by Martin

  Hello everybody, Recently I have had a MainBoard-problem. I've send my mainboard to service and today I got it back from the company. It is a Foxconn 520a mainboard. Now I have installed my exchanged mainboard. But now I have a problem. My system boots until the device list with IRQ entries appear. The system says "Verifying DMI-pool-data..." and nothing happens. The IRQ-device list shows that the memory-controller is not available. All other devices have got an IRQ. Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ 0 0 0 10DE 0547 0500 Memory Controller NA Do you have any ideas where the problem could be? I already have disconnected all unnecessary devices like the hard disks. Perhaps it is a BIOS problem, but I don't know where I should look. Would be nice if there is any advice, Greetings, Martin

  Read the article

• USB stick appearing as hard disk drive, not removable storage device

  - by Paul Lammertsma

  I just plugged in a very simple 1GB USB stick from the office in hopes of making it a Fedora Live USB stick. For that to work, I need a removable storage device, or else it won't appear in LiveUSB Creator's list. Explorer lists my USB stick as a hard disk: LiveUSB Creator indeed doesn't show it in the device list: Is there any way of forcing Windows to see the stick as a removable storage device?

  Read the article

• how do I get my mac to recognize a mass storage device

  - by peder elder

  I can't get my mac to recognize an external mass storage device

  Read the article

• How to set the time HylaFax waits for the remote device to pick up

  - by Flo

  I'm using HylaFax on one of my server to send facsimile to different devices which works pretty well except for one device. I'm not sure, but the problem might be, that the remote device takes to long to pick up and response to the call. I tested it by calling the fax number with my phone and it took 30 seconds till the remote side picked up. So is there a way to tell HylaFax how long it should wait for the remote device to answer?

  Read the article

• Missing whole disk device in OpenSolaris

  - by Jeff Mc

  I have begun experimenting with Solaris and ZFS as a NAS. All was going very smoothly until I had a drive failure. When I replaced the drive, I no longer have a device file mapped to the whole disk. /dev/dsk/c7t3d0 does not exist but c7t2d0 and c7t4d0 both do. Also the sd@3,0:wd file under the /devices/ tree is non-existent. Do I have to prepare/partition the disk somehow to cause the whole disk device to exist? Here are a few outputs that might be useful. jeffmc@ats-ds2:/dev/dsk$ zpool status pool: datapool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-2Q scrub: none requested config: NAME STATE READ WRITE CKSUM datapool DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 UNAVAIL 0 0 0 cannot open mirror-1 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 jeffmc@ats-ds2:/dev/dsk$ zpool replace datapool c7t3d0 cannot open 'c7t3d0': no such device in /dev/dsk must be a full path or shorthand device name jeffmc@ats-ds2:/dev/dsk$ sudo format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@0,0 1. c7t1d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@1,0 2. c7t2d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@2,0 3. c7t3d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@3,0 4. c7t4d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@4,0 5. c7t5d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@5,0

  Read the article

• Access device with local ip over internet

  - by Joe Perrin

  I apologize up front if this is the wrong place to post this question. It seemed like the best fit. I have a device which is connected to my local network which has an IP of 192.168.1.10 from my router. Additionally I use a Windows 7 machine that runs some software called DirectUpdate which allows me to resolve the local IP of the Windows 7 machine (192.168.1.5) to be accessible to the internet via my domain (example.com) - Basic dynamic DNS updating. I'd like to access the device from example.com. I am unsure how to do this as I don't have any way to install DirectUpdate (or any software) on the device to make the device available to the internet. Any insight here would be appreciated. Thank you.

  Read the article

• Writing a "Hello World" Device Driver for kernel 2.6 using Eclipse

  - by Isaac

  Goal I am trying to write a simple device driver on Ubuntu. I want to do this using Eclipse (or a better IDE that is suitable for driver programming). Here is the code: #include <linux/module.h> static int __init hello_world( void ) { printk( "hello world!\n" ); return 0; } static void __exit goodbye_world( void ) { printk( "goodbye world!\n" ); } module_init( hello_world ); module_exit( goodbye_world ); My effort After some research, I decided to use Eclipse CTD for developing the driver (while I am still not sure if it supports multi-threading debugging tools). So I: Installed Ubuntu 11.04 desktop x86 on a VMWare virtual machine, Installed eclipse-cdt and linux-headers-2.6.38-8 using Synaptic Package Manager, Created a C Project named TestDriver1 and copy-pasted above code to it, Changed the default build command, make, to the following customized build command: make -C /lib/modules/2.6.38-8-generic/build M=/home/isaac/workspace/TestDriver1 The problem I get an error when I try to build this project using eclipse. Here is the log for the build: **** Build of configuration Debug for project TestDriver1 **** make -C /lib/modules/2.6.38-8-generic/build M=/home/isaac/workspace/TestDriver1 all make: Entering directory '/usr/src/linux-headers-2.6.38-8-generic' make: *** No rule to make target vmlinux', needed byall'. Stop. make: Leaving directory '/usr/src/linux-headers-2.6.38-8-generic' Interestingly, I get no error when I use shell instead of eclipse to build this project. To use shell, I just create a Makefile containing obj-m += TestDriver1.o and use the above make command to build. So, something must be wrong with the eclipse Makefile. Maybe it is looking for the vmlinux architecture (?) or something while current architecture is x86. Maybe it's because of VMWare? As I understood, eclipse creates the makefiles automatically and modifying it manually would cause errors in the future OR make managing makefile difficult. So, how can I compile this project on eclipse?

  Read the article

• Android device - C++ OpenGL 2: eglCreateWindowSurface invalid

  - by ThreaderSlash

  I am trying to debug and run OGLES on Native C++ in my Android device in order to implement a native 3D game for mobile smart phones. The point is that I got an error and see no reason for that. Here is the line from the code that the debugger complains: mSurface = eglCreateWindowSurface(mDisplay, lConfig, mApplication->window, NULL); And this is the error message: Invalid arguments ' Candidates are: void * eglCreateWindowSurface(void *, void *, unsigned long int, const int *) ' --x-- Here is the declaration: android_app* mApplication; EGLDisplay mDisplay; EGLint lFormat, lNumConfigs, lErrorResult; EGLConfig lConfig; // Defines display requirements. 16bits mode here. const EGLint lAttributes[] = { EGL_RENDERABLE_TYPE, EGL_OPENGL_ES2_BIT, EGL_BLUE_SIZE, 5, EGL_GREEN_SIZE, 6, EGL_RED_SIZE, 5, EGL_SURFACE_TYPE, EGL_WINDOW_BIT, EGL_RENDER_BUFFER, EGL_BACK_BUFFER, EGL_NONE }; // Retrieves a display connection and initializes it. packt_Log_debug("Connecting to the display."); mDisplay = eglGetDisplay(EGL_DEFAULT_DISPLAY); if (mDisplay == EGL_NO_DISPLAY) goto ERROR; if (!eglInitialize(mDisplay, NULL, NULL)) goto ERROR; // Selects the first OpenGL configuration found. packt_Log_debug("Selecting a display config."); if(!eglChooseConfig(mDisplay, lAttributes, &lConfig, 1, &lNumConfigs) || (lNumConfigs <= 0)) goto ERROR; // Reconfigures the Android window with the EGL format. packt_Log_debug("Configuring window format."); if (!eglGetConfigAttrib(mDisplay, lConfig, EGL_NATIVE_VISUAL_ID, &lFormat)) goto ERROR; ANativeWindow_setBuffersGeometry(mApplication->window, 0, 0, lFormat); // Creates the display surface. packt_Log_debug("Initializing the display."); mSurface = eglCreateWindowSurface(mDisplay, lConfig, mApplication->window, NULL); --x-- Hope someone here can shed some light on it.

  Read the article

• Android device unable to obtain ip address connecting to AP created with Hostapd

  - by user114392

  I have a wired internet connection that works behind an authenticated proxy server. I followed the steps mentioned here and managed to create a hotspot which my google nexus 7 detects. However, it seems stuck at "obtaining an ip address" and is not able to connect to the internet. I initially received the following error message when running the script in the terminal: dnsmasq: failed to create listening socket for 127.0.0.1: Address already in use [fail] I figured it is because of a conflict with the network manager, I commented out the "dns=dnsmasq" line in the nm configuration file. After a network-manager restart, the first error doesn't show up but I get the following: Configuration file: /etc/hostapd.conf Failed to create interface mon.wlan0: -23 (Too many open files in system) Try to remove and re-create mon.wlan0 In both cases, however, the hotspot is created and is detected by my android device. only that it cannot "obtain an ip address" and connect to it. Is it because my eth0 connects via a proxy server? Or could there be something wrong with the dnsmasq config? Any help would be appreciated.

  Read the article

• USB Device first mounted as root, then by user

  - by Petr Marek

  When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

  Read the article

• Reverse WiFi to Broadcast connection coming from a USB device

  - by Daniel Clem

  I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

  Read the article

• network manager says "device not managed"

  - by Daniella Glover

  I used to be able to share my network connection by editing the Auto Eth0 to share with other computers in the Ipv4 section and now I upgraded my laptop to 11.10 . Now are there no wired connections in the network manager. When I click my connections applet at the top of the tray it also says wired device not managed! when I type ifconfig -a daniella@daniella-1001HA:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 eth0:avahi Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc inet addr:169.254.13.40 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:45 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:25:d3:90:43:41 inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe90:4341/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12881 errors:0 dropped:0 overruns:0 frame:0 TX packets:12867 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8851081 (8.8 MB) TX bytes:2343199 (2.3 MB)

  Read the article

• Developing an iOS app for a single device - licensing issue

  - by bfavaretto

  I'm developing an iOS app for a museum as a freelancer. It's a very simple video player, to be installed on a single iPad that will be part of a permanent exhibition, basically acting as a kiosk. It turns out the iPad is the ideal device for that if you're looking for a small and affordable touchscreen. The problem is: as far as I can tell, none of the Apple Developer Program options available will allow me to distribute an app like that. The relevant options are (from the link above): iOS Developer Program ($99/year) Select this program if you would like to distribute apps on the App Store as an individual, sole proprietor, company, organization, government entity or educational institution. iOS Developer Enterprise Program ($299/year) Select this program if you would like to develop proprietary apps for internal distribution within your company, organization, government entity or educational institution. The regular program requires distribution through the App Store. The Enterprise version is for internal distribution within my own organization. Neither is the case here! It seems like I'm doomed to violate Apple's terms of service (and I can think of at least two ways of doing that: jailbreaking, or changing the iPad's date so it won't know the provisioning profile expired). Is that really so, or did I get the descriptions wrong? Has anyone here been in a similar situation?

  Read the article

• How to remove the xmlns:XSI and xmlns:XSD namespaces from the xml output of a webservice in .net fra

  - by Chetan

  HI, This is an old question, i have seen some solutions on this forum itself, but am trying to use webservices for the first time so please bear with me on this one. I have a webservice that returns XML in the following format <subs xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" msisdn="965xxxxxx"> <shortcode label="XXXX"> <channels> <channel> <id>442</id> <name>News</name> <billingperiod>7</billingperiod> <billingamount>3</billingamount> <lastbilling>4/14/2010 1:41:11 PM</lastbilling> </channel> <channel> <id>443</id> <name>News2</name> <billingperiod>7</billingperiod> <billingamount>3</billingamount> <lastbilling>4/14/2010 1:41:19 PM</lastbilling> </channel> </channels> </shortcode> </subs> I want the same XMl output without the xmlns:xsd and xmlns:xsi tags. I have tried the following solution that was suggested: Public Function GetSubscription(....) As String Dim namespaces As New XmlSerializerNamespaces namespaces.Add(String.Empty, String.Empty) Dim serializer As New XmlSerializer(SubsDetail.GetType) Dim sw As New System.IO.StringWriter Dim writer As New System.Xml.XmlTextWriter(sw) writer.Formatting = Formatting.None serializer.Serialize(writer, SubsDetail, namespaces) writer.Close() Return sw.toString() The result was that I got an xml in the following format: <string> <?xml version="1.0" encoding="utf-16"?><subs msisdn="965xxxx"> <shortcode label="XXXX"> <channels> <channel> <id>442</id> <name>News</name> <billingperiod>7</billingperiod> <billingamount>3</billingamount> <lastbilling>4/14/2010 1:41:11 PM</lastbilling> </channel> <channel> <id>443</id> <name>News2</name> <billingperiod>7</billingperiod> <billingamount>3</billingamount> <lastbilling>4/14/2010 1:41:19 PM</lastbilling> </channel> </channels> </shortcode> </subs> </string> Though the format of the xml is correct it is coming as string within the <string> tags. This is really driving me nuts. Can I get the output as xml without the outer string tags?

  Read the article

• Cannot find root device after latest kernel upgrade

  - by DisgruntledGoat

  I'm running Ubuntu 13.04. Yesterday I tried to install updates but there was an error, and it suggested running apt-get -f install which I did. Now when I try to boot, I get an error "Gave up waiting for root device". The text is almost identical to the text shown in this and this question. However, the "built-in shell" simply doesn't work! Nothing I type shows up on the screen or does anything. I tried adding a rootdelay to grub but it just waits longer and shows the same screen. Loading the previous kernel works (although there are a few graphics glitches) but as far as I can tell, it should be booting the exact same stuff. The new kernel is 3.8.0-31-generic and the previous working one is 3.8.0-25-generic. Here is my entire /boot/grub/menu.lst file, comments removed: default 0 timeout 3 title Ubuntu 13.04, kernel 3.8.0-31-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac rootdelay=120 ro quiet splash initrd /boot/initrd.img-3.8.0-31-generic quiet title Ubuntu 13.04, kernel 3.8.0-31-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-31-generic title Ubuntu 13.04, kernel 3.8.0-25-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-25-generic quiet title Ubuntu 13.04, kernel 3.8.0-25-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-25-generic title Ubuntu 13.04, kernel 3.8.0-23-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-23-generic quiet title Ubuntu 13.04, kernel 3.8.0-23-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-23-generic title Ubuntu 13.04, memtest86+ uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/memtest86+.bin quiet title -------------------------------- root title Windows Vista rootnoverify (hd0,2) savedefault makeactive chainloader +1 As you can see the UUID is the same for all kernels. Why am I getting this problem, and what can I do to fix it?

  Read the article

• Log Debug Messages without Debug Serial on Shipped Device

  - by Kate Moss' Open Space

  Debug message is one of the ancient but useful way for problem resolving. Message is redirected to PB if KITL is enabled otherwise it goes to default debug port, usually a serial port on most of the platform but it really depends on how OEMWriteDebugString and OEMWriteDebugByte are implemented. For many reasons, we don't want to have a debug serial port, for example, we don't have enough spare serial ports and it can affect the performance. So some of the BSP designers decide to dump the messages into other media, could be a log file, shared memory or any solution that is suitable for the need. In CE 5.0 and previous, OAL and Kernel are linked into one binaries; in the other word, you can use whatever function in kernel, such as SC_CreateFileW to access filesystem in OAL, even this is strongly not recommended. But since the OAL is being a standalone executable in CE 6.0, we no longer can use this back door but only interface exported in NKGlobal which just provides enough for OAL but no more. Accessing filesystem or using sync object to communicate to other drivers or application is even not an option. Sounds like the kernel lock itself up; of course, OAL is in kernel space, you can still do whatever you want to hack into kernel, but once again, it is not only make it a dirty solution but also fragile. So isn't there an elegant solution? Let's see how a debug message print out. In private\winceos\COREOS\nk\kernel\printf.c, the OutputDebugStringW is the one for pumping out the messages; most of the code is for error handling and serialization but what really interesting is the following code piece     if (g_cInterruptsOff) {         OEMWriteDebugString ((unsigned short *)str);     } else {         g_pNKGlobal->pfnWriteDebugString ((unsigned short *)str);     }     CELOG_OutputDebugString(dwActvProcId, dwCurThId, str); It outputs the message to default debug output (is redirected to KITL when available) or OAL when needed but note that highlight part, it also invokes CELOG_OutputDebugString. Follow the thread to private\winceos\COREOS\nk\logger\CeLogInstrumentation.c, this function dump whatever input to CELOG. So whatever the debug message is we always got a clone in CELOG. General speaking, all of the debug message is logged to CELOG already, so what you need to do is using celogflush.exe with CELZONE_DEBUG zone, and then viewing the data using the by Readlog tool. Here are some information about these tools CELOG - http://msdn.microsoft.com/en-us/library/ee479818.aspx READLOG - http://msdn.microsoft.com/en-us/library/ee481220.aspx Also for advanced reader, I encourage you to dig into private\winceos\COREOS\nk\celog\celogdll, the source of CELOG.DLL and use it as a starting point to create a more lightweight debug message logger for your own device!

  Read the article

• 13.04 Logitech bluetooth speaker adapter pairing but no mixer output

  - by user1455622

  I had to change [General] Enable = Socket in /etc/bluetooth/audio.conf to get it to pair. But now that they are I don't get an output in pavucontrol. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPAG on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPHS on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSource on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSink on adapter /org/bluez/3855/hci0. E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: Unknown Bluetooth minor device class 0 D: [pulseaudio] module-card-restore.c: Not restoring profile for card bluez_card.C8_84_47_15_B7_34, because already set. I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card bluez_card.C8_84_47_15_B7_34. I: [pulseaudio] card.c: Created 2 "bluez_card.C8_84_47_15_B7_34" W: [pulseaudio] module-bluetooth-device.c: Profile has no transport D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] card.c: Changed profile of card 2 "bluez_card.C8_84_47_15_B7_34" to off I: [pulseaudio] module.c: Loaded "module-bluetooth-device" (index: #22; argument: "address=C8:84:47:15:B7:34 profile=a2dp"). I: [alsa-source] alsa-source.c: Scheduling delay of 10,06ms, you might want to investigate this to improve latency... I: [alsa-source] ratelimit.c: 5 events suppressed I: [alsa-source] alsa-source.c: Overrun! I: [alsa-source] alsa-source.c: Increasing minimal latency to 2,00 ms D: [alsa-source] alsa-source.c: latency set to 20,00ms D: [alsa-source] alsa-source.c: hwbuf_unused=62008 D: [alsa-source] alsa-source.c: setting avail_min=442 What can I do to get it working? Regards,

  Read the article

• Cannot use apt-get/dpkg -- Input/output error

  - by mecho

  I have bumped into an issue that doesn't allow me to do anything related to apt-get: install, remove, etc. Whenever I try to do something (e.g. sudo apt-get install firefox -f) it gives me the same error message: Reading database ... dpkg: unrecoverable fatal error, aborting: unable to open files list file for package `fontconfig-config': Input/output error E: Sub-process /usr/bin/dpkg returned an error code (2) I have tried to deal with the package `fontconfig-config' without success. I have found that the "Input/output error" is usually linked with physical problems of the hd, but I do not think that's the case I am using that hd without any other problem. I have tried removing the mention to the package in /var/lib/dpkg/status as mentioned here. I have tried deleting all files related to the package in /var/lib/dpkg/info as I found somewhere. But I still cannot do anything. The funny bit comes when I look for the file that is giving me troubles: mecho@Ansible-MS-7680:/var/lib/dpkg/info$ ls fontconfig* ls: cannot access fontconfig-config.list: Input/output error fontconfig.list fontconfig.postinst fontconfig.preinst fontconfig.triggers fontconfig.md5sums fontconfig.postrm fontconfig.prerm This is done after I deleted all files ... it looks like fontconfig-config.list still exists but it doesn't show up! Any idea about how to solve the problem? I am on kubuntu precise, fontconfig-config_2.8.0-3ubuntu9.1

  Read the article

• Acer Allionone Z5810 Touchscreen Issues 12.04

  - by Johannes

  I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

  - by Bence Mihalka

  When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

  Read the article

• How can I unit test rendering output?

  - by stephelton

  I've been embracing Test-Driven Development (TDD) recently and it's had wonderful impacts on my development output and the resiliency of my codebase. I would like to extend this approach to some of the rendering work that I do in OpenGL, but I've been unable to find any good approaches to this. I'll start with a concrete example so we know what kinds of things I want to test; lets say I want to create a unit cube that rotates about some axis, and that I want to ensure that, for some number of frames, each frame is rendered correctly. How can I create an automated test case for this? Preferably, I'd even be able to write a test case before writing any code to render the cube (per usual TDD practices.) Among many other things, I'd want to make sure that the cube's size, location, and orientation are correct in each rendered frame. I may even want to make sure that the lighting equations in my shaders are correct in each frame. The only remotely useful approach to this that I've come across involves comparing rendered output to a reference output, which generally precludes TDD practice, and is very cumbersome. I could go on about other desired requirements, but I'm afraid the ones I've listed already are out of reach.

  Read the article

• Set iPhone Style Location Based Alerts On Your Android Device With Google Now

  - by Gopinath

  Location based alerts of iPhone are very useful. You can set an alert to popup as soon as you reach a specific location like “Pickup milk and eggs” when I’m near a grocery store. This feature was missing in Android for a long time, but last week at Google I/O conference Google released an update to Google Now which supports location based alerts. To setup a location based alert 1. Launch Google Now 2. Type or say add reminder 3. By default it shows time based alert interface, switch it location based by touching Location icon 4. Set reminder text, choose a location and touch Set reminder 5. Your alert is set now and as soon as you are close by the specified location, you’ll see an alert on your device. This is a nice feature and I’m using it quite often for the past couple of days.  There are couple of things missing from the current version of Google Now location based alerts– recurring alerts and ability to set alerts on leaving a specific location. It is not possible to recur location based alerts. You will be alerted only once as soon as you reach the location and it is not possible to repeat the alert next time you visit the location. Lets say you want to be reminded to say hi to friend’s parents whenever you are travelling close by their home. It does not work. The second missing feature is something basic and some how Google did not incorporate in their first iteration. Lets say you are at office now and you want to set up alert to pickup flowers when you leave office. Sounds like a simple use case for location based alerts right? But there is no way to set this type of alerts. Google Now alerts you as soon as you reach a location, but not when you leave a location. Do you have an Android that supports Google Now? If so what are your thoughts on location based alerts?

  Read the article

• Named output parameters vs return values

  - by Abyx

  Which code is better: // C++ void handle_message(...some input parameters..., bool& wasHandled) void set_some_value(int newValue, int* oldValue = nullptr) // C# void handle_message(...some input parameters..., out bool wasHandled) void set_some_value(int newValue, out int oldValue) or bool handle_message(...some input parameters...) ///< Returns -1 if message was handled //(sorry, this documentation was broken a year ago and we're too busy to fix it) int set_some_value(T newValue) // (well, it's obvious what this function returns, so I didn't write any documentation for it) The first one doesn't have and need any documentation. It's a self-documenting code. Output value clearly says what it means, and it's really hard to make a change like this: - void handle_message(Message msg, bool& wasHandled) { - wasHandled = false; - if (...) { wasHandled = true; ... + void handle_message(Message msg, int& wasHandled) { + wasHandled = -1; + if (...) { wasHandled = ...; With return values such change could be done easily /// Return true if message was handled - bool handle_message(Message msg) { + int handle_message(Message msg) { ... - return true; + return -1; Most of compilers don't (and can't) check documentation written in comments. Programmers also tend to ignore comments while editing code. So, again, the question is: if subroutine has single output value, should it be a procedure with well-named self-documenting output parameter, or should it be a function which returns an unnamed value and have a comment describing it?

  Read the article

• Alfa AWUS036H USB wireless adapter not recognized

  - by GFiasco

  The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

  Read the article

• Rendering output to arbitary quadrilateral

  - by Trainee4Life

  I want to render output on a device to an arbitary quadirlateral, i.e. project texture on to a quad. What are the possible ways I could implement it? Till now, I have investigated: Drawing textured quadrilateral - Quads look odd as they are composed of triangles, and the distortion looks odd. The issue I'm facing has been discussed here and here as well. Setting transformation on device - Need help in getting this implemented. Pixel shaders - Not able to implement the desired effect. Any help would be much appreciated.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >