Search Results

Search found 6928 results on 278 pages for 'calling'.

Page 210/278 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

  • Better way to call superclass method in ExtJS

    - by Rene Saarsoo
    All the ExtJS documentation and examples I have read suggest calling superclass methods like this: MyApp.MyPanel = Ext.extend(Ext.Panel, { initComponent: function() { // do something MyPanel specific here... MyApp.MyPanel.superclass.initComponent.call(this); } }); I have been using this pattern for quite some time and the main problem is, that when you rename your class then you also have to change all the calls to superclass methods. That's quite inconvenient, often I will forget and then I have to track down strange errors. But reading the source of Ext.extend() I discovered, that instead I could use the superclass() or super() methods that Ext.extend() adds to the prototype: MyApp.MyPanel = Ext.extend(Ext.Panel, { initComponent: function() { // do something MyPanel specific here... this.superclass().initComponent.call(this); } }); In this code renaming MyPanel to something else is simple - I just have to change the one line. But I have doubts... I haven't seen this documented anywhere and the old wisdom says, I shouldn't rely on undocumented behaviour. I didn't found a single use of these superclass() and supr() methods in ExtJS source code. Why create them when you aren't going to use them? Maybe these methods were used in some older version of ExtJS but are deprecated now? But it seems such a useful feature, why would you deprecate it? So, should I use these methods or not?

    Read the article

  • Need to call original function from detoured function

    - by peachykeen
    I'm using Detours to hook into an executable's message function, but I need to run my own code and then call the original code. From what I've seen in the Detours docs, it definitely sounds like that should happen automatically. The original function prints a message to the screen, but as soon as I attach a detour it starts running my code and stops printing. The original function code is roughly: void CGuiObject::AppendMsgToBuffer(classA, unsigned long, unsigned long, int, classB); My function is: void CGuiObject_AppendMsgToBuffer( [same params, with names] ); I know the memory position the original function resides in, so using: DWORD OrigPos = 0x0040592C; DetourAttach( (void*)OrigPos, CGuiObject_AppendMsgToBuffer); gets me into the function. This code works almost perfectly: my function is called with the proper parameters. However, execution leaves my function and the original code is not called. I've tried jmping back in, but that crashes the program (I'm assuming the code Detours moved to fit the hook is responsible for the crash). Edit: I've managed to fix the first issue, with no returning to program execution. By calling the OrigPos value as a function, I'm able to go to the "trampoline" function and from there on to the original code. However, somewhere along the lines the registers are changing and that is causing the program to crash with a segfault as soon as I get back into the original code.

    Read the article

  • Dynamically populated NSPopUpButtonCell menu in an NSOutlineView

    - by Mo
    I’m working with an NSOutlineView which has two columns. My dataSource supplies the outline view with a tree of items of a custom class which represents file types (that is, you initialise it with a UTI). The first column is the display name of the file type (e.g., “Source code”, “Interface Builder NIB document”, etc.). The second column is an NSPopUpButtonCell which is supposed to allow the user to pick a handler for the given document type (think of Xcode’s “File Types” preference pane, and you’re pretty much there). I can generate an NSMenu for a given item in the tree, populated with options based upon the Launch Services database entries for the UTI, complete with the relevant application icon and and so on. In fact, the menu itself works wonderfully, populated by way of NSPopUpButtonCellWillPopUpNotification. The problem is, try as I might, the cell when the menu isn’t popped up always contains precisely one of two things: either an empty string, or the default text for the cell, the former if the result of -handlerName on the item (the attribute assigned to the column) is non-nil, the latter otherwise. Moreover, I’m manually calling -selectItem: on the NSPopUpButtonCell instance, which just seems Wrong. In contrast, the left-hand column, which is just an NSTextFieldCell, everything just works (although granted, all it’s got to do is read the value from the item and present it). (Disclaimer: I’m fairly new at Cocoa UI stuff; I know Objective-C, and lots of other programming languages, but I’ve not a huge amount of experience of building Mac OS X UIs, so be gentle).

    Read the article

  • iPhone SDK: Progressive UITableView updates, smoothly animated

    - by boliva
    Hi all, There's something I've been trying to do with no success. I have an UITableView whose viewController is both its delegate and dataSource. On it I also have a mutableArray as a property, which basically acts as the tableView dataSource. This mutableArray gets continously updated from an online XML source. What I haven't been able to accomplish successfully is to animate the adding of new rows at the top of the tableView and the deletion of the oldest rows at its bottom (thinking I'll always going to show the same amount of data, say the latest 10 entries). The method I'm actually using is that, after finishing receiving and parsing the XML data I'm removing all the contents of the mutableArray and storing the new entries on it, to later reload the tableView (calling the 'reloadData' method). In between I'm using a CATransition in order to 'fade' the tableView from its previous to its new state. I tried using beginUpdates and endUpdates, with code for selectively removing the old rows from the tableView and adding the new ones to it, as well as to its datasource, however the animation takes place in the whole table instead of the affected rows only. What I want to accomplish is, after an update, to delete as many rows from the 'bottom' of the table as new entries I have retrieved, sliding the tableView down and adding the new rows at the top of it, smoothly animated. Best regards,

    Read the article

  • PulpCore OGG music playback - can't loop as soon as I animate the musicVolume property

    - by Peter Perhác
    I have been experimenting with PulpCore for about a week or so and I am enjoying it very much but today I ran into a problem that I can't quite figure out. Sound bgMusic = Sound.load("music/music.ogg"); Playback musicPlayback; ... musicVolume = new Fixed(0.75); musicPlayback = bgMusic.loop(musicVolume); //TODO figure out why it's NOT looping when volume is animated // musicVolume.animate(0, musicVolume.get(), FADE_IN_TIME); This code, for as long as the last line is commented out, plays the music.ogg again and again in an endless loop (which I can stop by calling stop on the Playback object returned from loop(). However, I would like the music to fade in smoothly, so following the advice of the PulpCore API docs, I added the last line which will create the fade-in but the music will only play once and then stop. I wonder why is that? Here is a bit of the documentation: Playback pulpcore.sound.Sound.loop(Fixed level) Loops this sound clip with the specified volume level (0.0 to 1.0). The level may have a property animation attached. Parameters: level Returns: a Playback object for this unique sound playback (one Sound can have many simultaneous Playback objects) or null if the sound could not be played. So what could be the problem? I repeat, with the last line, the sound fades in but doesn't loop, without it it loops but starts with the specified 0.75 volume level.

    Read the article

  • passing callback function accross windows causing error with ie ...

    - by krul
    I have a problem with IE causing two errors: 1. Object doesn't support this property or method 2. Call was rejected by callee. My Intention: To call window.opener.myObject method that is going to retrieve some data using ajax and pass in callback function that live as nested function in popup window that initiated call that is going to handle response data and modify popup window html accordingly. Here is a scenario: I pull up popup window that handles some specific operation. This popup window calling window.opener.myObject method that using ajax call. I'm passing in popup window function that is going to handle response and it works with ff and safari but not with ie. Here is code sample //RELEVANT SCRIPT ON POPUP WINDOW $('#myButton').live('click', function() { var h = window.opener.myObject, p = { 'p1': 1 }; var responseHandler = function(responseObj) { //in IE we never got here if (!responseObj) { alert('Unexpected error!! No response from server'); return false; } //..handle response }; p.p1 = $('#control').val(); h.executeMethod(p, responseHandler); }); //RELEVANT SCRIPT ON WINDOW OPENER MYOBJECT try { $.ajax({ type: 'POST', async: true, url: url, data: postData, dataType: "json", contentType: 'application/x-www-form-urlencoded; charset=utf-8', success: r, // r here is reference to my responseHandler popup window function error: handleError }); } catch (ex) { alert(ex.message); } Any tips?

    Read the article

  • Excel::Shape object getting released automatically after the count reaches 18 in List<T>

    - by A9S6
    I have a Excel addin written in C# 2.0 in which I am experiencing a strange behavior.Please note that this behavior is only seen in Excel 2003 and NOT in Excel 2007 or 2010. Issue: When the user clicks an import command button, a file is read and a number of Shapes are created/added to the worksheet using Worksheet::Shapes::AddPicture() method. A reference to these Shape objects are kept in a generic list: List<Excel.Shape> list = new List<Excel.Shape>(); Everything works fine till the list has less than 18 references. When the count reaches 18, and a new Shape reference is added, the first one i.e. @ index [0] is released. I am unable to call any method or property on that reference and calling a method/property throws a COMException (0x800A1A8) i.e. Object Required. If I add one more, then the reference @ [1] is not accessible and so on. Strange enough... this happens with Shape object only i.e. If I add one Shape and then 17 nulls to the list then this wont happen until 17 more Shape objects are added. Does anyone has an idea why it happens after the count reaches 18? I thought it might be something with the List's default capacity. Something like relocating the references during which they get released so I initialized it with a capacity of 1000 but still no luck. List<Excel.Shape> list = new List<Excel.Shape>(1000); Any Idea??

    Read the article

  • passing values between forms (winforms)

    - by dnkira
    Hello. Vierd behaviar when passing values to and from 2nd form. ParameterForm pf = new ParameterForm(testString); works ParameterForm pf = new ParameterForm(); pf.testString="test"; doesn't (testString defined as public string) maybe i'm missing something? anyway i'd like to make 2nd variant work properly, as for now - it returns null object reference error. thanks for help. posting more code here: calling Button ParametersButton = new Button(); ParametersButton.Click += delegate { ParameterForm pf = new ParameterForm(doc.GetElementById(ParametersButton.Tag.ToString())); pf.ShowDialog(this); pf.test = "test"; pf.Submit += new ParameterForm.ParameterSubmitResult(pf_Submit); }; definition and use public partial class ParameterForm : Form { public string test; public XmlElement node; public delegate void ParameterSubmitResult(object sender, XmlElement e); public event ParameterSubmitResult Submit; public void SubmitButton_Click(object sender, EventArgs e) { Submit(this,this.node); Debug.WriteLine(test); } } result: Submit - null object reference test - null object reference

    Read the article

  • How do I find the object with the oldest updated_at column in RJS?

    - by user284194
    Hello, I'm trying to remove the object with the oldest updated_at value when the rjs is executed. page.insert_html :top, :messages, :partial => @message page[@message].visual_effect :grow page[:message_form].reset Message.old_messages.each do |m| page.remove(m.id) end page.delay(1) do page.select('.message').last.visual_effect :fade end I'm using .last in there right now, but I have a periodically_call_remote in the view that continually updates and runs the rjs above. The line: page.select('.message').last.visual_effect :fade seems to only execute the first time because after the message that is "last" fades away there's nothing recognized as "last" anymore so I figure instead of calling .last I could find the object that has the oldest updated_at time stamp and just remove that instead. I'm thinking that I probably cannot do this using page.select since it only calls on css elements. And therefore I probably don't have access to the updated_at values in the Message model. Does anyone have a suggestion on how to accomplish removing the oldest message with rjs? The messages are already automatically removed in the model as new messages are created. But I want them to fade automatically when the RJS refreshes the element.

    Read the article

  • How to do logout functionality in C# smart device application?

    - by Shailesh Jaiswal
    I am developng Smart device application in C#. It is a window application. In this application I am using Login form to authenticate the users. Only authenticated users can login into the system. In this application I am calling java web services which resides on another machine. I am passing mobile number & password from mu application's login form to the java web services. The java web services returns the userid after successful authentication. I made this userid static so that it can be used frequently with other web services. I using statc variables in this application so that they can be used at application level. After deploying the application I can see that emulator provides the close button with multiplicaton symbol. In this way I can close my form as well as application. But I want to provde one logout link in my application. Can I provide logout functionality in C# window application ? If yes, how to do that ? Please make sure that all the functions of .net framework does not work with .net compact framwork? Can you provide me the code or link through which can resolve the above issue ?

    Read the article

  • Rhino Mocks and ordered test with unordered calls

    - by Shaddix
    I'm using Rhino.Mocks for testing the system. I'm going to check the order of calling .LoadConfig and .Backup methods. I need .LoadConfig to be the first. Currently the code is like this: var module1 = mocks.Stub<IBackupModule>(); var module2 = mocks.Stub<IBackupModule>(); module1.Expect(x => x.Name).Return("test"); module2.Expect(x => x.Name).Return("test2"); using (mocks.Ordered()) { module1.Expect(x => x.LoadConfig(null)); module2.Expect(x => x.LoadConfig(null)); module1.Expect(x => x.Backup()); module2.Expect(x => x.Backup()); } mocks.ReplayAll(); The problem is, that there's also a call to .Name property, and i'm not interesting when it'll be called: before .LoadConfig or after the .Backup - it just doesn't matter. And when I run this I'm getting Exception: Unordered method call! The expected call is: 'Ordered: { IConfigLoader.LoadConfig(null); }' but was: 'IIdentification.get_Name();' Is there a way to deal with this? Thanks

    Read the article

  • jquery animation headache

    - by OneNerd
    Doing some jquery animation. I have certain divs set up with an attribute of ani_seq='x' where x is 1 to 9, and then have a class assigned of 'animate'. I am using the following code, which works fine, and fades in each item in sequence: function my_animate( in_wrapper_id ) { $j("#" + in_wrapper_id + " .animate").hide(); // hide all items to be animated // animate all seq1 items -- $j("#" + in_wrapper_id + " [ani_seq='1']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='2']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='3']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='4']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='5']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='6']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='7']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='8']").fadeIn( 1000, function() { $j("#" + in_wrapper_id + " [ani_seq='9']").fadeIn( 1000 ); }); }); }); }); }); }); }); }); } The problem I have is, some items are not just fade-in. Some should slide in from the left or right. So, I can certainly write a custom function to do that. What I do not know how to do is set up the custom function so it works like the fadeIn() function in that it accepts a callback function that will be executed when the animation is done. For example, lets say I i have a function like this (not sure this is the proper format): function custom_animate ( in_time_in_ms, in_callback_function ) { // get class of element, and based on class perform either // a fade-in, or a slide-in from left, or a slide-in from right // then after animation is done, return control back to calling // function so it can resume } I would want to replace all of the fadeIn() calls in the first piece of code with custom_animate(), and then inside that function, determine what kind of animation to perform. Can anyone help? Thanks -

    Read the article

  • maven-release-plugin: Perform fails with 'working directory "...workspace\target\checkout\workspace"

    - by Ed
    Hi, I have maven project that fails when release:perform is called, though release;prepare works as expected. I have found the bug report (below) which certainly seems to resemble the issue I have but not entirely sure I understand the problem: MRELEASE516 The last few lines of output I get: [INFO] Executing: cmd.exe /X /C "p4 -d E:\hudson\jobs\myHudsonJob\workspace\target\checkout -p 10.20.0.38:1666 client -d myProjectWorkspace-MavenSCM-E:\hudson\jobs\myHudsonJob\workspace\target\checkout" [INFO] Executing goals 'deploy'... [WARNING] Base directory is a file. Using base directory as POM location. [WARNING] Maven will be executed in interactive mode, but no input stream has been configured for this MavenInvoker instance. [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Error executing Maven. Working directory "E:\hudson\jobs\myHudsonJob\workspace\target\checkout\workspace" does not exist! From reading the bug report the possible cause of the error is related to my modules' structure, I've tried to outline it below: /workspace | |+ pom.xml (root pom whose parent is the build pom, | calling release:perform on this pom) | [Modules: moduleA and moduleB] | |- moduleA |+ pom.xml (parent is also build pom) |+ build/pom.xml (the build pom - no custom parent) |- moduleB |+ pom.xml (parent is build pom) It seems that the root pom should be in some common directory inside 'workspace' from the error but tried that and doesn't work, nor make sense as to why I need it. What does the warning Base directory is a file want me to do instead?! It then figures that the base directory is workspace which then means the working directory is not found...any ideas? Thanks in advance.

    Read the article

  • how to push a string address to stack with assembly, machine code

    - by Yigit
    Hi all, I am changing minesweeper.exe in order to have an understanding of how code injection works. Simply, I want the minesweeper to show a message box before starting. So, I find a "cave" in the executable and then define the string to show in messagebox and call the messagebox. Additionally of course, I have to change the value at module entry point of the executable and first direct it to my additional code, then continue its own code. So at the cave what I do; "hello starbuck",0 push 0 //arg4 of MessageBoxW function push the address of my string //arg3, must be title push the address of my string //arg2, must be the message push 0 //arg1 call MessageBoxW ... Now since the memory addresses of codes in the executable change everytime it is loaded in the memory, for calling the MessageBoxW function, I give the offset of the address where MessageBoxW is defined in Import Address Table. For instance, if MessageBoxW is defined at address1 in the IAT and the instruction just after call MessageBoxW is at address2 instead of writing call MessageBoxW, I write call address2 - address1. So my question is, how do I do it for pushing the string's address to the stack? For example, if I do these changes via ollydbg, I give the immediate address of "hello starbuck" for pushing and it works. But after reloading the executable or starting it outside of ollydbg, it naturally fails, since the immediate addresses change. Thanks in advance, Yigit.

    Read the article

  • Java method keyword "final" and its use

    - by Lukas Eder
    When I create complex type hierarchies (several levels, several types per level), I like to use the final keyword on methods implementing some interface declaration. An example: interface Garble { int zork(); } interface Gnarf extends Garble { /** * This is the same as calling {@link #zblah(0)} */ int zblah(); int zblah(int defaultZblah); } And then abstract class AbstractGarble implements Garble { @Override public final int zork() { ... } } abstract class AbstractGnarf extends AbstractGarble implements Gnarf { // Here I absolutely want to fix the default behaviour of zblah // No Gnarf shouldn't be allowed to set 1 as the default, for instance @Override public final int zblah() { return zblah(0); } // This method is not implemented here, but in a subclass @Override public abstract int zblah(int defaultZblah); } I do this for several reasons: It helps me develop the type hierarchy. When I add a class to the hierarchy, it is very clear, what methods I have to implement, and what methods I may not override (in case I forgot the details about the hierarchy) I think overriding concrete stuff is bad according to design principles and patterns, such as the template method pattern. I don't want other developers or my users do it. So the final keyword works perfectly for me. My question is: Why is it used so rarely in the wild? Can you show me some examples / reasons where final (in a similar case to mine) would be very bad?

    Read the article

  • Delphi How to wait for socket answer inside procedure?

    - by Astronavigator
    For some specific needs i need to create procedure that waits for socket request (or answer) in dll: TForm1 = class(TForm) ServerSocket1: TServerSocket; ...... procedure MyWaitProc; stdcall; begin Go := false; while not Go do begin // Wating... // Application.ProcessMessages; // Works with this line end; end; procedure TForm1.ServerSocket1ClientRead(Sender: TObject; Socket: TCustomWinSocket); begin MessageBoxA(0, PAnsiChar('Received: '+Socket.ReceiveText), '', MB_OK); Go := true; end; exports MyWaitProc; When I call Application.ProcessMessages everything works fine: application waits for request and then continues. But in my case calling Application.ProcessMessages causes to unlocking main form on host application (not dll's one). When I don't call Application.ProcessMessages application just hangs couse it cannot handle message... So, how to create such a procedure that's wating for socket answer ? Maybe there a way to wait for socket answer without using Application.ProcessMessages ? EDIT I also tried to use TIdTCPServer, for some reasons, the result is the same. TForm1 = class(TForm) IdTCPServer1: TIdTCPServer; ..... procedure MyWaitProc; stdcall; begin Go := false; while not Go do begin // Waiting ... // Application.ProcessMessages; end; end; procedure TForm1.IdTCPServer1Execute(AContext: TIdContext); var s: string; begin s := AContext.Connection.Socket.ReadString(1); AllText := AllText + s; Go := True; end;

    Read the article

  • WCF service with PHP client - complex type as parameter not working

    - by Matt F
    Hi, I have a WCF service with three methods. Two of the methods return custom types (these work as expected), and the third method takes a custom type as a parameter and returns a boolean. When calling the third method via a PHP soap client it returns an 'Object reference not set to an instance of an object' exception. Example Custom Type: _ Public Class MyClass Private _propertyA As Double <DataMember()> _ Public Property PropertyA() As Double Get Return _propertyA End Get Set(ByVal value As Double) _propertyA = value End Set End Property Private _propertyB As Double <DataMember()> _ Public Property PropertyB() As Double Get Return _propertyB End Get Set(ByVal value As Double) _propertyB = value End Set End Property Private _propertyC As Date <DataMember()> _ Public Property PropertyC() As Date Get Return _propertyC End Get Set(ByVal value As Date) _propertyC = value End Set End Property End Class Method: Public Function Add(ByVal param As MyClass) As Boolean Implements IService1.Add ' ... End Function PHP client call: $client-Add(array('param'=array( 'PropertyA' = 1, 'PropertyB' = 2, 'PropertyC' = "2009-01-01" ))); The WCF service works fine with a .Net client but I'm new to PHP and can't get this to work. Is it possible to create an instance of 'MyClass' in PHP. Any help would be appreciated. Note: I'm using PHP 5 (XAMPP 1.7.0 for Windows). Thanks Matt

    Read the article

  • How to download .txt file from a url?

    - by Colin Roe
    I produced a text file and is saved to a location in the project folder. How do I redirect them to the url that contains that text file, so they can download the text file. CreateCSVFile creates the csv file to a file path based on a datatable. Calling: string pth = ("C:\\Work\\PG\\AI Handheld Website\\AI Handheld Website\\Reports\\Files\\report.txt"); CreateCSVFile(data, pth); And the function: public void CreateCSVFile(DataTable dt, string strFilePath) { StreamWriter sw = new StreamWriter(strFilePath, false); int iColCount = dt.Columns.Count; for (int i = 0; i < iColCount; i++) { sw.Write(dt.Columns[i]); if (i < iColCount - 1) { sw.Write(","); } } sw.Write(sw.NewLine); // Now write all the rows. foreach (DataRow dr in dt.Rows) { for (int i = 0; i < iColCount; i++) { if (!Convert.IsDBNull(dr[i])) { sw.Write(dr[i].ToString()); } if (i < iColCount - 1) { sw.Write(","); } } sw.Write(sw.NewLine); } sw.Close(); Response.WriteFile(strFilePath); FileInfo fileInfo = new FileInfo(strFilePath); if (fileInfo.Exists) { //Response.Clear(); //Response.AddHeader("Content-Disposition", "attachment; filename=" + fileInfo.Name); //Response.AddHeader("Content-Length", fileInfo.Length.ToString()); //Response.ContentType = "application/octet-stream"; //Response.Flush(); //Response.TransmitFile(fileInfo.FullName); } }

    Read the article

  • Defining < for STL sort algorithm - operator overload, functor or standalone function?

    - by Andy
    I have a stl::list containing Widget class objects. They need to be sorted according to two members in the Widget class. For the sorting to work, I need to define a less-than comparator comparing two Widget objects. There seems to be a myriad of ways to do it. From what I can gather, one can either: a. Define a comparison operator overload in the class: bool Widget::operator< (const Widget &rhs) const b. Define a standalone function taking two Widgets: bool operator<(const Widget& lhs, const Widget& rhs); And then make the Widget class a friend of it: class Widget { // Various class definitions ... friend bool operator<(const Widget& lhs, const Widget& rhs); }; c. Define a functor and then include it as a parameter when calling the sort function: class Widget_Less : public binary_function<Widget, Widget, bool> { bool operator()(const Widget &lhs, const Widget& rhs) const; }; Does anybody know which method is better? In particular I am interested to know if I should do 1 or 2. I searched the book Effective STL by Scott Meyer but unfortunately it does not have anything to say about this. Thank you for your reply.

    Read the article

  • Memory leak when returning object

    - by Yakattak
    I have this memory leak that has been very stubborn for the past week or so. I have a class method I use in a class called "ArchiveManager" that will unarchive a specific .dat file for me, and return an array with it's contents. Here is the method: +(NSMutableArray *)unarchiveCustomObject { NSMutableArray *array = [NSMutableArray arrayWithArray:[NSKeyedUnarchiver unarchiveObjectWithFile:/* Archive Path */]]; return array; } I understand I don't have ownership of it at this point, and I return it. CustomObject *myObject = [[ArchiveManager unarchiveCustomObject] objectAtIndex:0]; Then, later when I unarchive it in a view controller to be used (I don't even create an array of it, nor do I make a pointer to it, I just reference it to get something out of the array returned by unarchiveCustomIbject (objectAtIndex). This is where Instruments is calling a memory leak, yet I don't see how this can leak! Any ideas? Thanks in advance. Edit: CustomObject initWithCoder added: -(id)initWithCoder:(NSCoder *)aDecoder { if (self = [super init]) { self.string1 = [aDecoder decodeObjectForKey:kString1]; self.string2 = [aDecoder decodeObjectForKey:kString2]; self.string3 = [aDecoder decodeObjectForKey:kString3]; UIImage *picture = [[UIImage alloc] initWithData:[aDecoder decodeObjectForKey:kPicture]]; self.picture = picture; self.array = [aDecoder decodeObjectForKey:kArray]; [picture release]; } return self; }

    Read the article

  • How much should the AppDelegate do?

    - by Rudiger
    I'm designing quite a large App and on startup it will create sessions with a few different servers. As they are creating a session which is used across all parts of the app its something I thought would be best in App Delegate. But the problem is I need the session progress to be represented on the screen. I plan to have a UIToolBar at the bottom of the main menu which I don't want to cover with the progress bar but cover the UIView above it.So the way I see it I could do it a few different ways. 1) Have the App Delegate establish the sessions and report the progress to the main menu class so it can represent it in the progress bar (will I have any issues doing this if the sessions are created in a separate thread?), 2) have the App delegate display the main menu (UIView with a bunch of buttons and UIToolBar) and have it track and display the progress (I have never displayed anything in the App Delegate but assume you can do this but its not recommended) or 3) have the App Delegate just push the main menu and have the mainMenu class create the sessions and display the progress bar. 4) I think the other way to do it is to create the sessions in a delegate class and have the delegate set to mainMenu rather than self (AppDelegate), although I've never used anything other then self so not sure if this will work or if I will be able to close the thread (through calling super maybe?) as its running in the AppDelegate rather than the delegate of the class. As I've kinda said before the sessions are being created in a class in a separate thread so it wont lock the UI and I think the best way is the first but am I going to have issues having it running in a separate thread, reporting back to the app delegate and then sending that message to the mainMenu view? I hope that all makes sense, let me know if you need any further clarification. Any information is appreciated Cheers,

    Read the article

  • Flash External Interface issue with Firefox

    - by majestiq
    I am having a hard time getting ExternalInterface to work on Firefox. I am trying to call a AS3 function from javascript. The SWF is setup with the right callbacks and it is working in IE. I am using AC_RunActiveContent.js to embed the swf into my page. However, I have modified it to add an ID to the Object / Embed Tags. Below are object and embed tag that are generated for IE and for Firefox respectively. <object codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" width="400" height="400" align="middle" id="jpeg_encoder2" name="jpeg_encoder3" classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" > <param name="movie" value="/jpeg_encoder/jpeg_encoder3.swf" /> <param name="quality" value="high" /> <param name="play" value="true" /> <param name="loop" value="true" /> <param name="scale" value="showall" /> <param name="wmode" value="window" /> <param name="devicefont" value="false" /> <param name="bgcolor" value="#ffffff" /> <param name="menu" value="false" /> <param name="allowFullScreen" value="false" /> <param name="allowScriptAccess" value="always" /> </object> <embed width="400" height="400" src="/jpeg_encoder/jpeg_encoder3.swf" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" align="middle" play="true" loop="true" scale="showall" wmode="window" devicefont="false" id="jpeg_encoder2" bgcolor="#ffffff" name="jpeg_encoder3" menu="false" allowFullScreen="false" allowScriptAccess="always" type="application/x-shockwave-flash" > </embed> I am calling the function like this... <script> try { document.getElementById('jpeg_encoder2').processImage(z); } catch (e) { alert(e.message); } </script> In Firefox, I get an error saying "document.getElementById("jpeg_encoder2").processImage is not a function" Any Ideas?

    Read the article

  • Playing wave file ends immediatly (C++, Windows)

    - by TyBoer
    I've got a following situation. On a machine there is a Fritz ISDN card. There is a process that is responsible for playing a certain wave file on this device's wave out (ISDN connection is made at startup and made persistent). The scenario is easy, whenever needed the process calls waveOutWrite() on the previously opened wave device (everything initialized without any problems of course) and a callback function waits for MMWOMDONE msg to know that the playback has been finished. Since a few days however (nothing changed neither in the process nor the machine) the MMWOMDONE message comes immediately after calling waveOutWrite() even though the wave lasts a couple of seconds. Again no error is reported, it looks like the file was played but had zero length (which is not the case). I am also sure that waveOutReset() was not called by my process (it would also trigger sending the mentioned message). I already used to have some strange problems in the past that where solved simply by reinstalling TAPI drivers. This time for some reason it is problematic form me to perform that once again and am trying more analytical approach :). Any suggestions what might cause such a behavior? Maybe sth on the other end of the ISDN line?

    Read the article

  • Using A Local file path in a Streamwriter object ASP.Net

    - by Nick LaMarca
    I am trying to create a csv file of some data. I have wrote a function that successfully does this.... Private Sub CreateCSVFile(ByVal dt As DataTable, ByVal strFilePath As String) Dim sw As New StreamWriter(strFilePath, False) ''# First we will write the headers. ''EDataTable dt = m_dsProducts.Tables[0]; Dim iColCount As Integer = dt.Columns.Count For i As Integer = 0 To iColCount - 1 sw.Write(dt.Columns(i)) If i < iColCount - 1 Then sw.Write(",") End If Next sw.Write(sw.NewLine) ''# Now write all the rows. For Each dr As DataRow In dt.Rows For i As Integer = 0 To iColCount - 1 If Not Convert.IsDBNull(dr(i)) Then sw.Write(dr(i).ToString()) End If If i < iColCount - 1 Then sw.Write(",") End If Next sw.Write(sw.NewLine) Next sw.Close() End Sub The problem is I am not using the streamwriter object correctly for what I trying to accomplish. Since this is an asp.net I need the user to pick a local filepath to put the file on. If I pass any path to this function its gonna try to write it to the directory specified on the server where the code is. I would like this to popup and let the user select a place on their local machine to put the file.... Dim exData As Byte() = File.ReadAllBytes(Server.MapPath(eio)) File.Delete(Server.MapPath(eio)) Response.AddHeader("content-disposition", String.Format("attachment; filename={0}", fn)) Response.ContentType = "application/x-msexcel" Response.BinaryWrite(exData) Response.Flush() Response.End() I am calling the first function in code like this... Dim emplTable As DataTable = SiteAccess.DownloadEmployee_H() CreateCSVFile(emplTable, "C:\\EmplTable.csv") Where I dont want to have specify the file loaction (because this will put the file on the server and not on a client machine) but rather let the user select the location on their client machine. Can someone help me put this together? Thanks in advance.

    Read the article

  • debugging scaffolding contingent upon degbugging boolean (java)

    - by David
    Recently i've found myself writing a lot of methods with what i can only think to call debugging scaffolding. Here's an example: public static void printArray (String[] array, boolean bug) { for (int i = 0; i<array.lenght; i++) { if (bug) System.out.print (i) ; //this line is what i'm calling the debugging scaffolding i guess. System.out.println(array[i]) ; } } in this method if i set bug to true, wherever its being called from maybe by some kind of user imput, then i get the special debugging text to let me know what index the string being printed as at just in case i needed to know for the sake of my debugging (pretend a state of affairs exists where its helpful). All of my questions more or less boil down to the question: is this a good idea? but with a tad bit more objectivity: Is this an effective way to test my methods and debug them? i mean effective in terms of efficiency and not messing up my code. Is it acceptable to leave the if (bug) stuff ; code in place after i've got my method up and working? (if a definition of "acceptability" is needed to make this question objective then use "is not a matter of programing controversy such as ommiting brackets in an if(boolean) with only one line after it, though if you've got something better go ahead and use your definition i won't mind) Is there a more effective way to accomplish the gole of making debugging easier than what i'm doing? Anything you know i mean to ask but that i have forgotten too (as much information as makes sense is appreciated).

    Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >