Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 214/279 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

  • Set-and-forget Windows backup software with NAS-support?

    - by Evert
    I am looking for set-and-forget backup software for Windows (Vista & 7, and if possible XP/2003). The idea is that it runs in the background on the clients, and does its thing towards a network-share. In case the HDD of one of these clients spontaneously combusts, all I want to have to do is: replace the drive, insert a USB-stick, boot from it, and restore the machine. It should support drives which use [ICH]-RAID. What are my options here? It looks like WHS meets all the requirements, but I am curious about my other options here.

    Read the article

  • Best alternatives to recover lost directories in FAT32 external hard drive?

    - by Sergio
    Hi: I have an 320 GB ADATA CH91 external hard drive. I guess it has some problems with the connector of the USB jack. The point is that in certain occasions it fails in write operations generating data losses. Right now I lost a directory with several GB's of very useful information. Since then I have not attempted to write to the disk any more. What tool would you recommend to recover the lost data? The disk is FAT32 formatted (only one partition) and I use both Linux and Windows. What filesystem format would you recommend to avoid future data losses? I currently only use this external hard drive in Linux so there are several available choices (FAT, NTFS, ext3, ext4, reiser, etc.). Regards, Sergio

    Read the article

  • Two network cards in one Windows 7 PC

    - by Martin
    Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

    Read the article

  • Getting triple-tap for Gyration Media Center remote working in Windows shell

    - by Lunatik
    I have this Gyration remote which, out of the box, does not support triple-tap for text entry outside of Media Center; only numbers can be entered in the Windows shell. Gyration have a patch that supposedly allows this, but it hasn't worked for me. I'm not alone in this regard it seems though. I've seem some discussion on removing and reinstalling USB devices to get this working, but nothing I'd really trust not to screw something else up. Does anyone have any tips for getting this functionality working properly?

    Read the article

  • I keep losing wireless connection

    - by posfan12
    I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

    Read the article

  • Enable automatic driver install in Windows XP

    - by Peter
    When Windows detects new hardware (be it graphic card or USB Peripheral) it automatically installs driver and if it can't find a driver it shows "Found New hardware wizard" that allows you to manually select a driver. My problem is that this "Found New hardware wizard" shows up every time when I plug a new device and I have to click Next Next Next.. until it finishes installation. It's just like in Windows 98 ;) I want to fix it to the way it's supposed to be. It's got nothing to do with "Windows Update" and "Driver Signing" settings in "System properties - Hardware" tab, those are on default settings. Here is the same problem I have, but those replies ale completely useless

    Read the article

  • Fedora 9 not reconizing hard drive

    - by Andrew Jones
    I am installing Fedora 9 to a PC (specifications at the bottom) and have had a lot of trouble with it recognising the hard drive. To get the Fedora installer to recognize it in the first place I had to pass "ata_generic.all_generic_ide=1 pci=nomsi" to the kernel, after which it installed OK. However, now when I boot the installed OS, I get a "could not find filesystem '/dev/root'" error. I tried passing the same arguments to the kernel at boot as I did when installing but to no avail. I have tried using the default LVM layout and defining manual ones but it made no difference. There is no option in the BIOS to enable AHCI or anything like that, in fact the BIOS is very limited in most respects. I can get into the system by using the installation CD in rescue mode (with those extra kernal parameters) but I'm not sure what to do once in there... Unfortunately using a more recent version of Fedora or even another Linux distribution altogether isn't an option becuase of outside constraints - which is annoying since I know for a fact Ubuntu works fine on this setup. I have not been using Linux that long, so treat me like an idiot - I am one. Any help would be greatly appreciated, thanks! System spec: Intel Atom Z530 CPU @ 1.6 GHz Intel US15W chipset 1 GB DDR2 160 GB SATA harddisk (Samsung HM16HI) 1000 Mbit/s Ethernet port Phoenix BIOS

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • New SSD freezing on older motherboard (intel G31)

    - by DJM
    I have an ECS G31T-M motherboard running a Core2 Quad processor, 4gb RAM, Windows 7 32bit, Geforce 9600GT. Bought a Sandisk Extreme III 120GB (SDSSDX-120G-G25) and installed today. I'm outputting this from my 9600GT with included TV-out adapter to Component video (to my HDTV). This motherboard is SATA 2 and from what I can tell, SSDs run on the IDE controller and there is nothing fancy to set up advanced features of SSDs. I've noticed on other forums (but not verifying with ECS) this board does not support AHCI. I have two versions of Windows 7 installed on two drives, the SSD and an old 500G disc drive. When booted from my older 500G HDD, video plays fine on the HDTV. When booting the SSD windows 7 install, I am freezing constantly, as in, video plays OK for a minute, then picture freezes for 1-3 minutes (sometimes as audio continues playing) and returns for 20-30 seconds before doing the same thing again. Other tasks such as basic maneuvering through file folders seems to be no problem. Please help!! Do I need a new system for this thing to work, or could there be other fixes? I updated firmware to R201 to no avail. DJM

    Read the article

  • Windows 8 won't boot after Boot Repair

    - by Rudolph Gottesheim
    I've got a Sony Vaio laptop. Until yesterday I had Windows 7 and Ubuntu 12.04 installed. Today I upgraded to Windows 8, which killed my OS selection screen. So I booted to Ubuntu 12.10 from a USB stick and ran Boot Repair. This recovered the GRUB screen and let me boot into my Ubuntu 12.04 installation, but now I can' boot Windows 8. When I select the option that booted Windows 7 before, it looks like it wants to start Windows 7 (sic) again (black screen, with the text "Windows is loading" or something), but then reboots the machine after a few seconds. I'm sure Boot Repair can fix this, but I know far too little about the whole booting thing to know the right settings for it. Here's my boot repair report thing.

    Read the article

  • How does one get rid of fishy behavior in Windows?

    - by Tom Wijsman
    After I had boot my computer this morning there suddenly flooded water from the top of the screen, after which some fishes dropped into it. Now I can barely see what I am doing because the water distorts the view. Sometimes the fish follow the cursor so I need to move it away or wait for the fish to mind their own business. This makes it very annoying to use my system. What have I tried? Reboot the system. This caused the water to deplete from the desktop. Upon reboot, the screen was refilled with water and fishes. Attach another monitor. Same problem, fills that monitor as well and gives me extra fish. Clicking the fish. Makes them turn direction. Right clicking the fish. Changes color of the fish, not really useful. I'm locked out of changing the background or screen saver settings. Hence, I had to post the lady below... Safe mode doesn't save me from the fishes. It does give me another background there, but I can't screenshot easily. Other user accounts experience this as well. The Guest account seems to experience more fish than the other accounts. Using HijackThis, OTL Timekeeper List, Syninternal Autoruns, RootKitRevealer, ShellExView and similar tools I can't seem to find any entries that could be it, the Sysinternals tools show everything as verified. I'm suspecting this to be a driver problem. Randomly removing drivers doesn't seem to alleviate the problem. When removing the Graphics Drivers, it makes my screen black. While that could be considered the solution, it's not what I want. Changing the time / date settings does also not seem to affect the fishes. Changing the time a few years in the future, I would have expected the fishes to be dead. But, the same fishes are still there... They simply won't die! Tried to get used to them. They are really bothering me, looks like they require food. I don't know how to give them food, but apparently they get it elsewhere during reboot... Tried to disable my mouse pointer and use the keyboard. This works, they now swim around more randomly. They do put their attention to huge changes on the screen, so I need to type slow. Or otherwise I can't see what I'm tying exactly. Hold my laptop upside down. This seems to affect the water and fishes, but the water stays in the screen. They seem super resistant against water sickness and confusion though... What does the problem look like? What do I need? A way to get rid of these fishes on my screen forever, they are really annoying me a lot and I'm about to crack the screen to see if that makes them escape. Do you have any idea why this problem is occurring? What are my considerations? Buying an USB fish tank could make the fish leave the screen, I am uncertain though whether the fish could leave the screen through the USB cable. Using the FISh (programming language) which seems to provide EXPRESSIVE POWER and EFFICIENT EXECUTION, I can however not find any examples on how to remove fish. What are my Specifications? I'm using a Sony Vaio Fishy laptop. Sony VAIO VGN-Fishy, VAIO. Processor: 1337 MHz, Intel Core 2 Duo, T5432, 1 MB, Intel PM965 Express, 667 MHz. Memory: 1024 MB, DDR2-SDRAM, 667 MHz, 2 x 1024 MB, 4 GB. Disk Drive: 50 GB, Serial ATA, 5400 RPM. Storage Media: Memory Stick™, Memory Stick PRO™. Display: 15.4 ", 1280 x 800 pixels, LCD. Video: GeForce 8400M GT, 128 MB. Optical Drive: DVD±R/RW DL, 24 x, 24 x, 24 x, 6 x, 4 x, 6 x, 4 x, 5 x, 5 x, 8 x, 8 x, 8 x, 8 x, 6 x, 6 x, 24 x, 24 x, 24 x, 16 x. Camera: 1.3 MP, 30 fps. Networking: 2.0+EDR. Keyboard: Touchpad, AZERTY. Operating System/Software: Windows Vista Home Premium. Security: Kensington. Weight & Dimensions: 98.8 oz (2800 g), 14 " (355.8 mm), 10 " (254.4 mm), 0.98 " (24.9 mm). Other features: 100 BASE-TX/10 BASE-T, 802.11a/b/g/n/Draft n, V92/V.90, fishes. Plz! Help me...

    Read the article

  • I flashed my DS4700 with a 7 series firmware, now my DS4300 cannot read the disks I moved to that lo

    - by Daniel Hoeving
    In preparation for adding a number of 1Tb SATA disks to our DS4700 I flashed the controller firmware from a 6 series (which only supports up to 2Tb logical drives) to a 7 series (which supports larger than 2Tb logical drives). Attached to this DS4700 was a EXP710 expansion drawer that we had planned to migrate out to our co-location to allieviate the storage issues we were having there. Unfortunately these two projects were planned in isolation to one another so I was at the time unaware of the issue that this would cause. Prior to migrating the drawer I was reading the "IBM TotalStorage DS4000 EXP700 and EXP710 Storage Expansion EnclosuresInstallation, User’s, and Maintenance Guide" and discovered this: Controller firmware 6.xx or earlier has a different metadata (DACstore) data structure than controller firmware 7.xx.xx.xx. Metadata consists of the array and logical drive configuration data. These two metadata data structures are not interchangeable. When powered up and in Optimal state, the storage subsystem with controller firmware level 7.xx.xx.xx can convert the metadata from the drives configured in storage subsystems with controller firmware level 6.xx or earlier to controller firmware level 7.xx.xx.xx metadata data structure. However, the storage subsystem with controller firmware level 6.xx or earlier cannot read the metadata from the drives configured in storage subsystems with controller firmware level 7.xx.xx.xx or later. I had assumed that if I deleted the logical drives and array information on the EXP710 prior to migrating it to the DS4300 (6.60.22 firmware) this would satisfy the above, unfortunately I was wrong. So my question is a) Is it possible to restore the DAC information to its factory settings, b) What tool(s) would I use to accomplish this, or c) is this a lost cause? Daniel.

    Read the article

  • How to stop S.M.A.R.T check running for external hard drive

    - by gotqn
    I am using Windows 7 and I have enabled my "S.M.A.R.T" check, too. I have bought an external 1 TB USB hard drive. When it is connected with my computer, it delays my machine initial start with about 4-5 minutes. I was very confused at the begging, then disable the "S.M.A.R.T" check and see that the computer runs normally after restart. So, here is what I want to know: Why the check is turn for the external disk? Is there a way to use the "S.M.A.R.T" check only for my main hard drive? Why it takes 4 to 5 minutes more, as my both hard drives - internal/external are 1 TB?

    Read the article

  • Intel Rapid Storage Technology (pre-OS) driver installation

    - by Nero theZero
    My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

    Read the article

  • Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

    - by Ben
    I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess.

    Read the article

  • Can't avoid starting macbook in safe mode

    - by Aaron Brown
    I recently spilled some water on my MacBook (mid-2010) keyboard and it shorted out several of the keys. Notably, control and left option don't work, and the system thinks that the left shift is permanently held down. I plugged in an external USB keyboard and all keys work fine; there's only one problem: The computer always starts in safe mode because the shift key is held down. I've tried holding down other keys (escape, space, c to name a few) and the control key doesn't work so I can't try that. I also tried KeyRemap4Macbook but it doesn't work in safe mode and it doesn't seem to help on startup for me. I can log in to Windows with no problems (with rEFIt) and I can browse the internet with no problems, but I can't program on the Mac OS side in safe mode (it's really slow). Which is mainly what I use this Macbook for. Any ideas out there on how to avoid starting in safe mode?

    Read the article

  • Why is (free_space + used_space) != total_size in df? [migrated]

    - by Timothy Jones
    I have a ~2TB ext4 USB external disk which is about half full: $ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdc 1922860848 927384456 897800668 51% /media/big I'm wondering why the total size (1922860848) isn't the same as Used+Available (1825185124)? From this answer I see that 5% of the disk might be reserved for root, but that would still only take the total used to 1921328166, which is still off. Is it related to some other filesystem overhead? In case it's relevant, lsof -n | grep deleted shows no deleted files on this disk, and there are no other filesystems mounted inside this one.

    Read the article

  • Windows won't sleep after booting from grub

    - by mkasberg
    I recently added a second hard drive to my computer and I am using it do dual-boot Linux (Ubuntu 12.04) with Windows 7. Both hard drives are SATA. I am using the default grub bootloader on my second hard drive. The windows drive is unmodified. To get to grub, I changed the hard disk boot priority in my BIOS (P35-DS3L) to boot from the second drive. The problem I'm having is that when I boot to Windows 7 (on sda) from grub (on sdb), Windows 7 will not go to sleep (from the start menu). The display shuts off momentarily as if its going to sleep, then comes back on and displays the switch-user screen. Powercfg -lastwake does not show anything. I am sure that this is related to booting from grub on sdb because when I change the hard disk boot priority in the BIOS to boot from my (unmodified) Windows hard disk, the computer goes to sleep fine. It occurred to me that installing grub on sda might solve the problem, but I'd rather not since I like to have my windows hard disk unmodified so that booting to it from the BIOS boots directly to windows. A possible work around is to use the BIOS as a bootloader, by pressing F8 to select the boot device. Still, I'd like to know why the problem is happening in the first place.

    Read the article

  • Can I be a wireless server WITHOUT offering internet?

    - by Kenny Hendrick
    I would like to pull into a truck stop and offer a folder of free documentaries to quell some of the ignorance LOL I run Linux ";-) Very happy to have made that switch by the way...and have an internal wireless in the laptop but my bus has an antenna on the roof which I connect via usb to create a wireless signal (this is the one I'd like to focus on since it will offer the most reach to all those truckers out there. My question is this. I'm running apache2 and have a bunch of videos tossed into the www folder and can access it locally and would like others that frown on paying to use the truckstops slow internet service and would like an alternative by simply logging onto me and getting the narrow content I offer freely without passwords and the like. Has anyone a good means of doing this? p.s. I've done this in the past but am getting old and forgetful (my crutch)

    Read the article

  • How can I install CentOS without a keyboard, mouse, or monitor?

    - by user1032531
    I will be buying a new computer which will be used as a CentOS server. I will put it on my home LAN, and once it is set up, will access it only through SSH. I don't want to spend a lot of money (maybe $500), and I don't want to buy another monitor or keyboard just to through them away after the server is setup. My question is how do I access the computer without a keyboard and monitor when I install the operating system? For media, I can use either the DVD or an ISO on the USB, so am good there. But how do I see what I am doing and enter commands without a monitor or keyboard? I have a Window 7 laptop, an XP laptop, and a CentOS laptop. Can I use one of my laptops to act as the MMI (Man Machine Interface)? If not, what is the easiest and least expensive option? Thank you

    Read the article

  • How to Recover HDD Formatted by "Create a Recovery Drive" Tool of Windows 8.1?

    - by ide
    I have 2 TB USB HDD which had these drives F: about 1 TB with 750 GB data H: about 120 GB with 60 GB data I: about 780 GB with 250 GB data (For TV: It was raw in Windows but visible in the Smart TV) I took 521 MB from last part of H to get new G drive. Then I run "Create a Recovery Drive" tool of Windows 8.1 and chose G drive. It said all data in the drive will be deleted. I thought it is just G drive but it deleted my whole HDD. It created 32 GB new F drive with writing 337 MB on it and rest of HDD is unallocated. I tried these programs to get my first 3 drives but non of them helped for getting 1st partition. TestDisk MiniTool Partition Wizard Home Edition EaseUS Partition Master 9.2.2 (I deleted new F drive volume because it scans only unallocated part) Recuva PC Inspector File Recovery

    Read the article

  • Wired network on computer to wifi

    - by user329592
    I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

    Read the article

  • Dell Poweredge 1950 with Perc 5i keeps losing raid config -> "Foreign Configuration Found"

    - by nosage
    The quick and dirty: the machine is a Dell Poweredge 1950, dual xeon quad cores, 8GB of ram, 2 2TB seagate SATAs in (supposed to be raid1) using a Perc 5i raid card. They are hot-swappable with a back-plane. I can build the raid fine and after a little while an install of server 08 r2 will blue screen and restart. When it comes up the raid controller says "Foreign Configuration Found." When I go into the raid configuration panel there is no raid listed but I can import the "foreign config", and the OS will boot up fine, until it blue screens again after a little while. The issue is OS independent. I have tried swapping raid cards, swapping the RAM module on the raid card and swapping the raid battery, all to no avail. Its almost as if there is a loose connection from the raid card to the back plane and both of disks get lost and the raid card drops the config. But it sees the disks fine when it boots back up. The raid card uses a SCSI SAS cable to connect to the back-plane so I guess the next step is to replace that, but... then I might as well replace the back-plane with a SCSI SAS to sata breakout cable, but... then I need a way to power the disks. Sorry for the wall of txt but it would be great to get some thoughts from people who worked with perc raid cards or poweredge servers with this type of issue before. Ironically I want to get this system up and running so I can work on MCITP labs. Thank you for any/all help and feel free to ask questions!

    Read the article

  • Can you recover from a backup with bad blocks?

    - by Macbook-Recovery
    The hard drive in my Macbook recently gave up while using it on the plane (dual prop, lots of vibration unfortunately). I have a backup of its contents from a few weeks ago, but there are files that aren't included in it that I would like to recover. As it stands right now, I have it plugged to my macbook by USB. Snow leopard recognizes it, but can't mount it. Therefore, tools like Diskwarrior and Techtools do not work. I started doing a clone of it with Data Rescue 3, but after 7 hours of activity (20% through the drive), it has copied 130 GB of the drive but reports all of the data as "bad blocks". My question is this: Is any data recoverable if the clone is completely composed of bad blocks?

    Read the article

  • Network MP600 printer asking me to install new driver on laptop.

    - by user15003
    I have windows 7 home 32-bit on my desktop which is connected to my mp600 via USB. I have Vista 64-bit on my laptop. The MP600 is set for sharing and appears under printers in network under my pc's name. When I click on connect it says "The server for canon inkjet mp600 printer does not have the correct printer drivers installed........." I don't know what to do and it is really frustrating. It all worked fine before when I had XP 32 bit on my desktop

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >