Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 213/279 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• Damaged XenServer Storage LVM partition table

  - by Fiolek

  I have a homeserver running under XenServer control with 3x1TB discs inside, one for XenServer and two mirrored(using Intel's fakeRAID and dmraid) for VMs and a user data(but now I think RAID didn't work). I tried to pass PCI card to VM using PCI-passthroug and I read somewhere that I need to recompile kernel with pciback module but something went wrong(I made mistake in /boot/extlinux.conf and server couldn't run) and I had to use LiveCD of GPartEd(I already had it on USB key) to correct this. But when I re-run the server all VDIs were gone. I have completly no idea what could go wrong. I tried to repair RAID using dmraid -R in the hope that everything will return to noramal but now I think this done more bad than good(and corrupted rest of LVM table...). Is there any possibility to recover this SR or only data from one(~100GB) of VDI? I also wants to apologise for my English, I'm not from English-speaking country and I'm only 16 years old, so I hadn't "time" to learn it(school isn't good place to do this) in sufficient way.

  Read the article

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• High Apache CPU usage, but low nginx - Configured correctly?

  - by Buckers

  We've just moved a website of ours over to a brand new high-spec Linux server (1x Intel Xeon E3-1230 v2 @ 3.30GHz, 8GB DDR3 ECC, 2x 128GB SATA SSD RAID1). The server has been configured to use nginx but we're not sure if its working correctly. The site always loads very fast to us (http://www.onedirection.net), but Plesk often sends us reports that the Apache CPU usage percentage reaches high leves, yet when we look at the nginx percentage it's always very low. We've come from a Windows background so are very new to Linux, but shouldn't nginx run INSTEAD of apache? Here's a screenshot from Plesk showing the CPU usage: http://www.pixelkicks.co.uk/_download/plesk.JPG The website gets around 20,000 visitors per day, and we use W3 Total Cache to get it running as fast as possible. MySQL has been optimised well. Memory usage is only running at 2GB of the 8GB. Does this look right? How can we tell that nginx is doing most of the work? Thanks, Chris.

  Read the article

• PC reboots automatically in the begining

  - by user233508

  I have a AMD Phenom II 3GHz. 2 GB RAM system running on Windows 7. Off late my PC does not start properly I have to start it at least 7-8 times before it starts. It starts and then shuts down. Every time the time for which the system is up increases. After 7-8 attempts it starts an works fine. I have to give it a min between restarts (USB mouse light goes off). If I try restarting before this time the PC does not start. I am suspecting humidity playing some factor as this issue has started creeping up ever since the rains have started.

  Read the article

• Dual booting windows 8.1 and ubuntu

  - by Sriniketh

  I have a lenovo laptop with windows 8.1. I wanted to use ubuntu alongside windows. Hence, i downloaded the ubuntu 14.04 iso and created a live pendrive using Universal USB installer. I disabled secure boot and booted from the pendrive. All i get is the GNU GRUB command line version 2.X. I don't get a GUI for the GRUB and i don't know how to boot into ubuntu from the command line. I searched quite a few online forums but in vain. Can someone tell me how to proceed? Thanks in advance.

  Read the article

• Keyboard automatically disconnects and reconnects

  - by Algorithms

  The problem i am facing is the keyboard (USB) automatically disconnects when there is a fluctuation in the power supply to the speaker. The speaker and the pc both draw power from a apc ups. The fluctuation occurs because the speaker plug is not tightly connected to the ups power outlet. It is okay for normal work, but a accidental jerk causes the fluctuation. However after some amount of time (usually within 5 seconds) the keyboard automatically reconnects and windows plays the sound of hardware connected. This problem will also occur if I manually take out the speaker power cable from the ups power outlet. My question is whether the problem I am facing is due to electrical issues, or due to software problems. PC config: OS : Windows 7 Ultimate UPS : APC 600 VA PSU : Corsair TX 650 Speaker : Realtek

  Read the article

• Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart"

  - by Senthil

  Problem: When I switch on my PC, after BIOS POST, a cursor is blinking for about 5 seconds and then I am getting this error message: A disk read error occurred. Press Ctrl + Alt + Del to restart. I am able to go into BIOS. But Windows loader doesn't even start. This message is shown after my motherboard logo comes and goes. Symptoms: I DID notice my system freezing for minutes at a time for past two days. Also, in the past two days, it stopped half way through the Window booting process. I had to do hard reset couple of times to get it working. But since today morning, I only get this error message. Configuration: Operating System: Windows 7 Ultimate 32-bit only. Hard disk: 1 Physical Disk - 80GB SATA Partitions: Two (2) - C: and D: File System: NTFS No drive encryption or compression is turned on. After I searched on the net, I have found people mentioning these possible causes: Hard Disk is physically failing Corrupt MBR Bad Sector I am planning to buy a new hard disk, install Windows on it and continue. But I need data from the old hard disk. The data I want is in D: drive, outside any Windows user folder, is not encrypted or compressed or protected in anyway. I think if someone/something can get the disk working again and knows NTFS, the data can be hopefully read. What steps should I follow to recover files from the defective disk? Update: I bought a new disk, installed windows on it and added the defective one as a slave. Then I was able to read the data from the defective hard disk. Though chkdsk found lots of errors, the files I wanted were not affected and I got them back :) I am not using that hard disk anymore though it seems to be working at the moment.

  Read the article

• Unable to login to arch linux

  - by Ayodhya

  I am new to archlinux. I am using live usb for archlinux. When I booted it said not a COM32R image. I explored on Google, used Tab and choose have64 and then it booted. Now I am not able to login I used password root but it's not accepting. I also used startx but nothing happened. I am using archlinux-2014.06.01-dual iso downloaded from archlinux website. I see the the following Arch Linux Menu after boot-up Boot Arch Linux (x86_64)(NBD) Boot Arch Linux (x86_64)(NFS) Boot Arch Linux (x86_64)(HTTP) Boot Arch Linux (i686)(NBD) Boot Arch Linux (i686)(NFS) Boot Arch Linux (i686)(HTTP) Boot Existing OS I Choose First one and fourth one (NBD) for live boot and i am having the problem mentioned above.

  Read the article

• Increasing SQL Server / Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/SQL Server VM all the RAM I can (12GB) & SQL Server RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL Server VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• Wildcards not being substituted

  - by user21463

  #!/bin/bash loc=`echo ~/.gvfs/*/DCIM/100_FUJI` rm -f /mnt/fujifilmA100 ln -s "$loc" /mnt/fujifilmA100 For some reason the variable * doesn't get substituted with the only possible value and gets given the value /home/chris/.gvfs/*/DCIM/100_FUJI. Does anyone have an idea of why? Please note: If global expansion fails, the pattern is not substituted. I ran the commands: chris@comp2008:~$ loc=`echo ~/.gvfs/*/DCIM/100_FUJI ` chris@comp2008:~$ echo $loc /home/chris/.gvfs/gphoto2 mount on usb%3A001,008/DCIM/100_FUJI So we can see the expansion should work I have now switched to using: loc = `find ~/.gvfs -name 100_FUJI ` I am just curious why it doesn't work as is. Debugging output using sh -x echo /home/chris/.gvfs/*/DCIM/100_FUJI loc=/home/chris/.gvfs/*/DCIM/100_FUJI rm -f /mnt/fujifilmA100 ln -s /home/chris/.gvfs/*/DCIM/100_FUJI/mnt/fujifilmA100

  Read the article

• win xp client, win 7 host, only xp drivers

  - by brett

  I have a win 7 64 bit box which has xp on it in a vmware module and also the win7 version. I can use my old usb wifi card under virtual xp as i have the wifi drivers, but apparently the manufacturing company never made any further drivers, nor did it release the source code. Is it possible to get networking between the client and the host, so that my host can browse etc? I thought the microsoft loopback adapter might be the answer but ever example i can find of it's use describes a setup where the host is connected fine and needs to route data to the client as well.

  Read the article

• Is my HDD dead forever?

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken and it couldn't be recognized by the BIOS. I have another of the same hard drive, so I exchanged the boards. I found out that there is a problem on its board since my good hard drive didn't work. But the broken hard drive doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hard drive is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hard drive but with the wrong size (2TB). I try to make it read the hard drive but it got an I/O error reading sector. It tries to read, the hard drive spins up. So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do to recover the files from it?

  Read the article

• How can you connect three external displays to a laptop with only one vga or dvi port and plenty of

  - by Byron

  I have had some success with usb docks like this Universal Docking Station by Kensington to connect one external display to my laptop while using the onboard vga port for another display. But that's only two displays and I'm shooting for three. All I do is develop software and work in Photoshop... no games. For the sake of discussion, we can assume a Thinkpad or equivalent laptop with Windows 7 (I'm hoping for a platform-agnostic solution). How could I do this?

  Read the article

• New Computer freezing up at random

  - by Benjamin Frost

  Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

  Read the article

• Server 2003 crashing intermittently, want to transfer function to other DC

  - by user1305332

  I have a Win2003R2 server that is intermittently crashing after some virus were introduced. I'm sure all virus have been cleaned thanks to Malwarebytes (were using McAfee - useless). When it crashes you can't login (local or remote) but can still access files remotely and ping it. After a while even file sharing stops and have to kill power to restart it (no BSOD) I need to either fix it (tried to reinstall SP2 and I tried to reinstall windows in repair mode but the repair option was not available when I booted from installation disks) or move it's functionality to another DC (another 2003R2 server). The server that's crashing is old with SCSI drives while the new server uses SATA drives and faster so it seems like a good idea to just transfer roles and ditch the old box. Finding replacement SCSI drives looks expensive if they ever fail. What would I need to transfer roles. If I just move the 5 FSMO roles and copy over the file shares. Would the new server have enough to run without the old server? Never done something like this, just want some tips. Thanks.

  Read the article

• Increasing MSSQL/Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/MSSQL VM all the RAM I can (12GB) & SQL RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• What version of SCO Open Server are guys using out there and on what hardware?

  - by Gath

  I have some old applications which are running on SCO Open Server 5.0.5, and i would love to move them to SCO Open Server 5.0.7 and on modern hardware(servers), currently am running SCO on old IBM PL 300 personal computer, on 92MB Memory, one processor, and it has been serving the clients pretty well. Now i have New Modern IBM xseries Servers and i would love to migrate the same applications to those new servers. Problem is, SCO 5.0.5 is unable to detect some of the hardware components in the new servers. I read somewhere that SCO 5.0.7 is able to detect the newer hardware even the USB ports etc. Is there anyone running SCO Openserver out there, and on what hardware architecture are they running on? Gath

  Read the article

• Windows does not detect any modems anymore[HSPA]

  - by Shenal Silva

  By an accident i uninstalled my Connect manager (ZTE). but when i re-install it the virtual CD drive is detected but it does not detect the drivers. When i direct to the folder containing the relevant drivers(.sys files) still it doesnt detect. Then i tried a modem of a different brand Huawei the same problem presists As i understand it is not a device(brand) driver specific issue as it does not detect modem(dongles) of any brand. when i plugged in a different USB device(a pen drive) the driver is detected and it works perfectly. Please help me with the issue i have tried system restore but it doesnt work. I want a repair that works without re-installing windows [Edit] I tried Karan's suggested method with usboblivion it didnt work. now im sure that the issue does not deal with the registry

  Read the article

• Dual mode 802.11n PCI adapters

  - by Mike Thompson

  I have recently bought a DLink DIR-825 router. It is a dual mode (2.4GZ & 5GHZ) 802.11n wireless access point/router. What is a good PCI adapter to pair with it? DLink appear to only make one dual mode adapter, which is the DWA-160 USB adapter. They don't seem to have a PCI adapter in their range, which seems very strange. Do any of the other network manufacturers make a good dual mode adapter?

  Read the article

• Setting up a Pagefile and Partition in Server 2008

  - by Brett Powell

  I am setting up 18 new machines for our company, and I have instructions from my new boss on setting up a Pagefile and Partition. I have looked at their existing machines to base the new setups off of, but there is no consistency between any 2 machines, which has left me extremely frustrated to say the least. My instructions are... 1) Set a static pagefile (use recommended value as max/min), set it on SSD if SSD available. 2) Make 3 partitions: C: is used for OS and install files D: is used for backups on machines with a SSD. On machines without SSD create a D: partition for pagefile (2*installed RAM for partition size) E: must be the partition hosting user files I have never messed with Pagefiles before, and looking at their existing machines is offering no help. My questions are... 1) As the machines I am setting up have no SSD (just 2 SATA drives) does it sound like the Pagefile should be setup on the C: (primary) drive or the D:? The instructions are vague so I have no idea. 2) As C: and D: are both Physical drives, does it sound like C: should be partitioned out to create the E: drive or D:? Thanks for any help I can get. I am extremely stressed out under a massive workload right now, and these vague instructions are quite infuriating.

  Read the article

• Looking for Driver Diagnostic and Repair Software

  - by risingTide

  Greetings, I am currently plagued with BSODS on startup (both normal and safe mode) for my XP Pro. After much troubleshooting I have determined it is a driver problem. However, because I cannot even boot I do not know how to fix it. I am looking for some specific driver diagnostic and repair software that I can use from another computer to access and fix the driver problem on the problematic XP drive. (I can access the problematic drive via USB from another computer.) I will offer more details about my specific situation if it is helpful or necessary. Thank you for your time!

  Read the article

• Installation stops with cmd.exe window on Laptop

  - by Saariko

  I am installing W7 Ent on an LG R580. I am working with a valid ISO (installs perfect on other systems). During the installation, before the installation window, the process hangs, and I get a black, cmd.exe screen with the following: Select Administrator: X:\windows\system32\cmd.exe Microsoft Windows [Version 6.1.7601] with a prompt for: X:\windows\system32 My keyboard at that time only prints capital letters with '^' before each. Only thing that I am able to do is reboot. In the bios, I tried to disable USB Legacy ( thinking the problem is with my DVD ) - did not help.

  Read the article

• My acer aspire laptop suddenly stopped working, just a blank screen

  - by mazda

  My acer aspire laptop suddenly stopped working while it was connected to my nokia mobile modem through usb. It stopped with power swich staying on and no response to clicking off, no irregular sound, nothing but just a blank screen. I disconnected the power and battery quickly but power switch did not respond at all and even the power indicator didn't turn on again. the display was also gone after disconecting the power and removing battery. It has no response or any sign of power while both battery and power supply are working. What do you think? A completely dead mainboard? Does the MB has any safty board or fuse that could be replaced? Any suggestion will be appreciated, Thank you.

  Read the article

• Windows 2008 terminal server - How to restrict access to DVD/floppy?

  - by test1839

  I has a very simple task. I need to block access to removable media (CD, DVD, floppy, USB drives etc.) on a Windows 2008 R2 Terminal Server for users and allow it for admins. I tried to enable the following policy in GPO: User Configuration/Administrative Templates/System/Removable Storage Access All Removable Storage classes: Deny all access = Enabled But it did not work. I tried different physical and virtual 2008 servers with the same result. It works on Windows 7 but not on Windows 2008. Has anyone had success with this parameter on Windows 2008? Thank you

  Read the article

• Routing internet through ethernet to a computer without a Wireless adapter

  - by Decency

  I'm setting up a small home network. I have a laptop which connects to internet wirelessly- that works fine. I have a desktop connected to this laptop by an ethernet cable which I'd like to access the internet with. In the past, I have used a different laptop to do this and had no problems doing so. Both computers run Windows 7. I have tried setting up a homegroup and disabling Windows firewall, as well as restarting both computers. I can share data but my internet connection can not be accessed through the desktop. (I understand USB network adapters are cheap, I have one on the way but that doesn't solve this issue.) Any help or live chat support if you'd prefer would be appreciated. Thanks!

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >