Search Results

Search found 16838 results on 674 pages for 'writing patterns dita cms'.

Page 214/674 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• I just started learning the syntax of c++. What now? [closed]

  - by user73924

  I more or less know the syntax of C++, but when I start to write a program, I have nothing to write, I am blank. The thing is I knew the syntax of C as well and I didn't know how to write programs in that either. Though I could understand the written answers of almost anything. So, my question here is how do I start writing my own programs or how do I put my thoughts on any program using any programming language?

  Read the article

• How to ask memcached auth connection by sasl and pam?

  - by user199216

  I use memcached in a untrust network, so I try to use sasl and pam to auth connection to memcached. I installed sasl and pam module, compiled and installed memcached with sasl enabled. Also I created db and table for pam user. I run: $ sudo testsaslauthd -u tester -p abc123 -s /etc/pam.d/memcached 0: OK "Success." where the tester and abc123 is the authed user in db, which I inserted. But my python script cannot be authed, always authentication failed returned. It seems it dose not use pam to authentication, still use sasldb, because when I add user by: $ sudo saslpasswd2 -a memcached -c tester and input password: abc123, It can passed. Python script: client = bmemcached.Client(('localhost:11211'), 'tester', 'abc123') and error: bmemcached.exceptions.MemcachedException: Code: 32 Message: Auth failure. memcached log: authenticated() in cmd 0x21 is true mech: ``PLAIN'' with 14 bytes of data SASL (severity 2): Password verification failed sasl result code: -20 Unknown sasl response: -20 >30 Writing an error: Auth failure. >30 Writing bin response: no auth log found in: /var/log/auth.log Configurations: vi /etc/default/saslauthd MECHANISMS="pam" vi /etc/pam.d/memcached auth sufficient pam_mysql.so user=sasl passwd=abc123 host=localhost db=sasldb table=sasl_user usercolumn=user_name passwdcolumn=password crypt=0 sqllog=1 verbose=1 account required pam_mysql.so user=sasl passwd=abc123 host=localhost db=sasldb table=sasl_user usercolumn=user_name passwdcolumn=password crypt=0 sqllog=1 verbose=1 vi /etc/sasl2/memcached.conf pwcheck_method: saslauthd Do I make my question clear, english is not my native language, sorry! Any tips will be thankful!

  Read the article

• What causes this logrotate behavior in Puppet?

  - by ujjain

  After running logrotate, Puppet starts writing it's logs into /var/log/puppet/masterhttp.log-20130616. How come it doesn't keep logging in /var/log/puppet/masterhttp.log? It seems normal behavior is renaming the original log-file and start with a clean fresh log-file to start writing in that log file, keeping the other file as a log-archive. [root@puppetmaster puppet]# ls -al total 97520 drwxr-x---. 2 puppet puppet 4096 Jun 16 03:24 . drwxr-xr-x. 12 root root 4096 Jul 1 09:11 .. -rw-r--r--. 1 puppet puppet 0 Jun 16 03:24 masterhttp.log -rw-rw----. 1 puppet puppet 99847187 Jul 1 09:19 masterhttp.log-20130616 [root@puppetmaster init.d]# cat /etc/logrotate.d/puppet /var/log/puppet/*log { missingok notifempty create 0644 puppet puppet sharedscripts postrotate pkill -USR2 -u puppet -f /usr/sbin/puppetmasterd || true [ -e /etc/init.d/puppet ] && /etc/init.d/puppet reload > /dev/null 2>&1 || true endscript } [root@puppetmaster init.d]# How can I make Puppet log to /var/log/puppet/masterhttp.log and not to /var/log/puppet/masterhttp.log-20130616? Even restarting puppet doesn't make it log into /var/log/puppet/masterhttp.log instead of /var/log/puppet/masterhttp.log-20130616.

  Read the article

• Backing up VMs to a tape drive

  - by Aljoscha Vollmerhaus

  I've got myself one of these fancy tape drives, HP LTO2 with 200/400 GB cartridges. The st driver reports it like this: scsi 1:0:0:0: Sequential-Access HP Ultrium 2-SCSI T65D I can store and retrieve files like a charm using tar, both tar cf /dev/st0 somedirectory and tar xf /dev/st0 work flawless. However, what I really would like to backup are LVM LVs. They contain entire virtual machines with varying partition layouts, so using mount and tar is not an option. I've tried using something like dd if=/dev/VG/LV bs=64k of=/dev/st0 to achieve this, but there seem to be various problems associated with this approach. Firstly, I would like to be able to store more than 1 LV on a single tape. Now I guess I could seek to concatenate the data on the tape, but I think this would not work very well in an automated scenario with many different LVs of various sizes. Secondly, I would like to store a small XML file along with the raw data that contains some information about the VM contained in the LV. I could dump everything to a directory and tar it up - not very desirable, I would have to set aside huge amounts of scratch space. Is there an easier way to achieve this? Thirdly, from googling around it seems like it would be wise to use something like mbuffer when writing to the tape, to prevent what wikipedia calls "shoe-shining" the tape. However, I can't get anything useful done with mbuffer. The mbuffer man page suggests this for writing to a tape device: mbuffer -t -m 10M -p 80 -f -o $TAPE So I've tried this: dd if=/dev/VG/LV | mbuffer -t -m 10M -p 80 -f -d 64k -o /dev/st0 Note the added "-d 64k" to account for the 64k block size of the tape. However, reading data back from a tape written in this way never seems to yield any useful results - dd has been running for ages now, and managed to transfer only 361M of data from the tape. What's wrong here?

  Read the article

• MySQL permission errors

  - by dotancohen

  It seems that on a Ubuntu 14.04 machine the user mysql cannot access anything. It is not writing logs nor reading files. Witness: - bruno():mysql$ cat /etc/passwd | grep mysql mysql:x:116:127:MySQL Server,,,:/nonexistent:/bin/false - bruno():mysql$ sudo mysql_install_db Installing MySQL system tables... 140818 18:16:50 [ERROR] Can't read from messagefile '/usr/share/mysql/english/errmsg.sys' 140818 18:16:50 [ERROR] Aborting 140818 18:16:50 [Note] Installation of system tables failed! Examine the logs in /var/lib/mysql for more information. ...boilerplate trimmed... - bruno():mysql$ ls -la /usr/share/mysql/english/errmsg.sys -rw-r--r-- 1 root root 59535 Jul 29 13:40 /usr/share/mysql/english/errmsg.sys - bruno():mysql$ wc -l /usr/share/mysql/english/errmsg.sys 16 /usr/share/mysql/english/errmsg.sys Here we have seen that mysql cannot read /usr/share/mysql/english/errmsg.sys even though the permissions are open to read it, and in fact the regular login user can read the file (with wc). Additionally, MySQL is not writing any logs: - bruno():mysql$ ls -la /var/log/mysql total 8 drwxr-s--- 2 mysql adm 4096 Aug 18 16:10 . drwxrwxr-x 18 root syslog 4096 Aug 18 16:10 .. What might cause this user to not be able to access anything? What can I do about it?

  Read the article

• Advanced Linux file permission question (ownership change during write operation)

  - by Kent

  By default the umask is 0022: usera@cmp$ touch somefile; ls -l total 0 -rw-r--r-- 1 usera usera 0 2009-09-22 22:30 somefile The directory /home/shared/ is meant for shared files and should be owned by root and the shared group. Files created here by usern (any user) are automatically owned by the shared group. There is a cron-job taking care of changing owning user and owning group (of any moved files) once per day: usera@cmp$ cat /etc/cron.daily/sharedscript #!/bin/bash chown -R root:shared /home/shared/ chmod -R 770 /home/shared/ I was writing a really large file to the shared directory. It had me (usera) as owning user and the shared group as group owner. During the write operation the cron job was run, and I still had no problem completing the write process. You see. I thought this would happen: I am writing the file. The file permissions and ownership data for the file looks like this: -rw-r--r-- usera shared The cron job kicks in! The chown line is processed and now the file is owned by the root user and the shared group. As the owning group only has read access to the file I get a file write error! Boom! End of story. Why did the operation succeed? A link to some kind of reference documentation to back up the reason would be very welcome (as I could use it to study more details).

  Read the article

• winbind failing after a semi-random amount of time

  - by The Digital Ninja

  I have winbind set up to authenticate to our AD for samba shares. This is the third such server, and the only one having any issues. It seems after a random amount of time samba shares will just stop working. Winbind processes seem to be running but restarting them seems to fix the issue for a while. Looking at the logs have been kind of hit an miss and I don't know exactly when it fails. One interesting thing is that it seems to be pulling from another domain controller that it shoudlnt. I censored out the domain name in this example. But isnt there some way to block authentication to a domain? I'm not sure if this is a symptom or a cause of the issue. [2010/10/18 08:02:10, 0] winbindd/winbindd_cache.c:initialize_winbindd_cache(2577) initialize_winbindd_cache: clearing cache and re-creating with version number 1 [2010/10/18 09:15:54, 1] libsmb/clikrb5.c:ads_krb5_mk_req(686) ads_krb5_mk_req: krb5_get_credentials failed for [email protected] (Cannot find KDC for requested realm) [2010/10/18 09:15:54, 1] libsmb/cliconnect.c:cli_session_setup_kerberos(624) cli_session_setup_kerberos: spnego_gen_negTokenTarg failed: Cannot find KDC for requested realm [2010/10/18 09:15:54, 0] lib/util_sock.c:write_data(1139) write_data: write failure. Error = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:write_socket(242) write_socket: Error writing 108 bytes to socket 18: ERRNO = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:cli_send_smb(290) Error writing 108 bytes to client. -1 (Connection reset by peer)

  Read the article

• nginx projects in subfolders

  - by Timothy

  I'm getting frustrated with my nginx configuration and so I'm asking for help in writing my config file to serve multiple projects from sub-directories in the same root. This isn't virtual hosting as they are all using the same host value. Perhaps an example will clarify my attempt: request 192.168.1.1/ should serve index.php from /var/www/public/ request 192.168.1.1/wiki/ should serve index.php from /var/www/wiki/public/ request 192.168.1.1/blog/ should serve index.php from /var/www/blog/public/ These projects are using PHP and use fastcgi. My current configuration is very minimal. server { listen 80 default; server_name localhost; access_log /var/log/nginx/localhost.access.log; root /var/www; index index.php index.html; location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www$fastcgi_script_name; include fastcgi_params; } } I've tried various things with alias and rewrite but was not able to get things set correctly for fastcgi. It seems there should be a more eloquent way than writing location blocks and duplicating root, index, SCRIPT_FILENAME, etc. Any pointers to get me headed in the right direction are appreciated.

  Read the article

• Linux - preventing an application from failing due to lack of disk space [migrated]

  - by Jernej

  Due to an unpredicted scenario I am currently in need of finding a solution to the fact that an application (which I do not wish to kill) is slowly hogging the entire disk space. To give more context I have an application in Python that uses multiprocessing.Pool to start 5 threads. Each thread writes some data to its own file. The program is running on Linux and I do not have root access to the machine. The program is CPU intensive and has been running for months. It still has a few days to write all the data. 40% of the data in the files is redundant and can be removed after a quick test. The system on which the program is running only has 30GB of remaining disk space and at the current rate of work it will surely be hogged before the program finishes. Given the above points I see the following solutions with respective problems Given that the process number i is writing to file_i, is it safe to move file_i to an external location? Will the OS simply create a new instance of file_i and write to it? I assume moving the file would remove it and the process would end up writing to a "dead" file? Is there a "command line" way to stop 4 of the 5 spawned workers and wait until one of them finishes and then resume their work? (I am sure one single worker thread would avoid hogging the disk) Suppose I use CTRL+Z to freeze the main process. Will this stop all the other processes spawned by multiprocessing.Pool? If yes, can I then safely edit the files as to remove the redundant lines? Given the three options that I see, would any of them work in this context? If not, is there a better way to handle this problem? I would really like to avoid the scenario in which the program crashes just few days before its finish.

  Read the article

• How can I get Haproxy to not log local requests?

  - by coneybeare

  I am trying to clean out some of the log clutter from my machines and am starting by removing requests that are generated from the server themselves. I have cache warmers running around the clock and I don't want these polluting the logs. I was able to get apache to stop logging local requests by adding a dontlog for the local IP: SetEnvIf Remote_Addr "RE\.DA\.CT\.ED" dontlog CustomLog "|logger -p local3.info -t http" combined env=!dontlog and now I am looking for something similar to put in a configuration for the Haproxy log. How can I prevent 127.0.0.1 requests from writing to the Haproxy log? UPDATE: 2/15/11 I use the excellent loggly service to pull out logs in the cloud, but I am seeing tons of logs like this: 2011 Feb 15 06:09:42.000 ip-10-251-194-96 http: RE.DA.CT.ED - - [15/Feb/2011:06:09:42 -0500] "HEAD /search/Nevad/predictive/txt HTTP/1.0" 200 - "-" "Wget/1.10.2 (Red Hat modified)" 2011 Feb 15 06:09:42.000 127.0.0.1 haproxy[10390]: 127.0.0.1:58408 [15/Feb/2011:06:09:42] www i-5dd7a331.0 0/0/0/8/8 200 210 - - --NI 0/0/0 0/0 "HEAD /search/Nevad/predictive/txt HTTP/1.1" and I want them gone. This question focuses on how to remove that haproxy log line from writing to the server side log in the first place.

  Read the article

• How to send from my Z88 to my PC

  - by Bevan

  I've got a Cambridge Z88 that I want to get working with my PC. Around 6 years ago - in 2004 - I made heavy use of my Z88 to do a whole bunch of writing on the train while commuting to and from work. The Z88 is solid state, lightweight and has a full size silent keyboard, so it works very well as a writing instrument. I still have the serial cable I soldered up back then and used successfully in 2004. It has these connections: Z88 9 pin ----- ------- 2 TxD ------> RxD 2 3 RxD <------ TxD 3 7 GND <-----> GND 5 4 RTS ------> CTS 8 5 CTS <-+ RTS 7 8 DCD <-+---- DTR 4 9 DTR ----+-> DCD 1 +-> DSR 6 Unfortunately, I haven't been able to find my notes from 2004 that describe how I got it to work back then. I've spent several hours trying to Google a result, but to no avail. I'm pretty sure the cable is fine - after all, it's what I used successfully six years ago, and I've checked it out with a multimeter - so I'm focusing on the PC end of things, which is where I'd like some assistance. Q1: In my recent attempts, I've been using both Hyperterminal (as built into Windows XP) and the command line (copy com2: con:), but with no success. What's a good (better!) serial communications application to use? Is there one that allows me to see as deep as the signalling that's occurring on the wire? Q2: If you have a Z88 that works correctly with your PC, what software do you use on the PC end, and what's the pinout of your cable? I'm pretty sure that the Z88 itself is working properly: When using the built in Import/Export tool to send a file, I see different behaviour when my serial cable is connected compared to disconnected. When disconnected, the transmission appears to work, with a progress meter counting up and then finishing; when connected, nothing happens 'cept a timeout if I wait long enough.

  Read the article

• Hard Disk Not Counting Reallocated Sectors

  - by MetaNova

  I have a drive that is reporting that the current pending sectors is "45". I have used badblocks to identify the sectors and I have been trying to write zeros to them with dd. From what I understand, when I attempt writing data directly to the bad sectors, it should trigger a reallocation, reducing current pending sectors by one and increasing the reallocated sector count. However, on this disk both Reallocated_Sector_Ct and Reallocated_Event_Count raw values are 0, and dd fails with I/O errors when I attempt to write zeros to the bad sectors. dd works fine, however, when I write to a good sector. # dd if=/dev/zero of=/dev/sdb bs=512 count=1 seek=217152 dd: error writing ‘/dev/sdb’: Input/output error Does this mean that my drive, in some way, has no spare sectors to be used for reallocation? Is my drive just in general a terrible person? (The drive isn't actually mine, I'm helping a friend out. They might have just gotten a cheap drive or something.) In case it is relevant, here is the output of smartctl -i : Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD15EARS-00Z5B1 Serial Number: WD-WMAVU3027748 LU WWN Device Id: 5 0014ee 25998d213 Firmware Version: 80.00A80 User Capacity: 1,500,301,910,016 bytes [1.50 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 18 17:47:29 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled UPDATE: I have run shred on the disk, which has caused Current_Pending_Sector to go to zero. However, Reallocated_Sector_Ct and Reallocated_Event_Count are still zero, and dd is now able to write data to the sectors it was previously unable to. This leads me with several other questions: Why aren't the reallocations being recored by the disk? I'm assuming the reallocation took place as I can now write data directly to the sector and couldn't before. Why did shred cause reallocation and not dd? Does the fact that shred writes random data instead of just zeros make a difference?

  Read the article

• How to secure an Internet-facing Elastic Search implementation in a shared hosting environment?

  - by casperOne

  (Originally asked on StackOverflow, and recommended that I move it here) I've been going over the documentation for Elastic Search and I'm a big fan and I'd like to use it to handle the search for my ASP.NET MVC app. That introduces a few interesting twists, however. If the ASP.NET MVC application was on a dedicated machine, it would be simple to spool up an instance of Elastic Search and use the TCP Transport to connect locally. However, I'm not on a dedicated machine for the ASP.NET MVC application, nor does it look like I'll move to one anytime soon. That leaves hosting Elastic Search on another machine (in the *NIX world) and I would probably go with shared hosting there. One of the biggest things lacking from Elastic Search, however, is the fact that it doesn't support HTTPS and basic authentication out of the box. If it did, then this question wouldn't exist; I'd simply host it somewhere and make sure to have an incredibly secure password and HTTPS enabled (possibly with a self-signed certificate). But that's not the case. That given, what is a good way to expose Elastic Search over the Internet in a secure way? Note, I'm looking for something that hopefully, will not require writing code to provide shims for the methods that I want (in other words, writing forwarders).

  Read the article

• Chef bash resource not executing as specified user

  - by Arthur Maltson

  I'm writing a Chef cookbook to install Hubot. In the recipe, I do the following: bash "install hubot" do user hubot_user group hubot_group cwd install_dir code <<-EOH wget https://github.com/downloads/github/hubot/hubot-#{node['hubot']['version']}.tar.gz && \ tar xzvf hubot-#{node['hubot']['version']}.tar.gz && \ cd hubot && \ npm install EOH end However, when I try to run chef-client on the server installing the cookbook, I'm getting a permission denied writing to the directory of the user that runs chef-client, not the hubot user. For some reason, npm is trying to run under the wrong user, not the user specified in the bash resource. I am able to run sudo su - hubot -c "npm install /usr/local/hubot/hubot" manually, and this gets the result I want (installs hubot as the hubot user). However, it seems chef-client isn't executing the command as the hubot user. Below you'll find the chef-client execution. Thank you in advance. Saving to: `hubot-2.1.0.tar.gz' 0K ...... 100% 563K=0.01s 2012-01-23 12:32:55 (563 KB/s) - `hubot-2.1.0.tar.gz' saved [7115/7115] npm ERR! Could not create /home/<user-chef-client-uses>/.npm/log/1.2.0/package.tgz npm ERR! Failed creating the tarball. npm ERR! couldn't pack /tmp/npm-1327339976597/1327339976597-0.13104878342710435/contents/package to /home/<user-chef-client-uses>/.npm/log/1.2.0/package.tgz npm ERR! error installing [email protected] Error: EACCES, permission denied '/home/<user-chef-client-uses>/.npm/log' ... npm not ok ---- End output of "bash" "/tmp/chef-script20120123-25024-u9nps2-0" ---- Ran "bash" "/tmp/chef-script20120123-25024-u9nps2-0" returned 1

  Read the article

• Heavy write to Galera cluster - table locked, cluster practically unusable

  - by Joe

  I set up Galera Cluster on 3 nodes. It works perfectly for reading data. I have done simple application to make some test on the cluster. Unfortunately I have to say that the Cluster fails totally when I try to do some writing. Maybe it can be configured differently or I do sth wrong? I have a simple stored procedure: CREATE PROCEDURE testproc(IN p_idWorker INTEGER) BEGIN DECLARE t_id INT DEFAULT -1; DECLARE t_counter INT ; UPDATE test SET idWorker = p_idWorker WHERE counter = 0 AND idWorker IS NULL limit 1; SELECT id FROM test WHERE idWorker = p_idWorker LIMIT 1 INTO t_id; SELECT ABS(MAX(counter)/MIN(counter)) FROM TEST INTO t_counter; SELECT COUNT(*) FROM test WHERE counter = 0 INTO t_counter; IF t_id >= 0 THEN UPDATE test SET counter = counter + 1 WHERE id = t_id; UPDATE test SET idWorker = NULL WHERE id = t_id; SELECT t_counter AS res; ELSE SELECT 'end' AS res; END IF; END $$ Now my simple C# application creates for example 3 MySQL clients in separate threads and each one executes the procedure every 100ms until there is no record where column 'counter' = 0. Unfortunately - after about 10 seconds sth is going bad. On servers there is process 'query_end' that never ends. After that - you cannot make update on the test table, MySQL returns: ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction . You cant even restart mysql. What you can do is to restart server, sometimes whole cluster. Is Galera Cluster so unreliable when you do massive concucurrent writing/updates? Hard to believe.

  Read the article

• VLC Crash when playing MKV files in Windows 7

  - by Phelios

  I'm not sure if the mkv file is corrupted, but when it is opened with VLC player, VLC loads up and displays nothing. Can't even close VLC after that. And also, VLC is running with 50% of the CPU. I have to use End Process to kill it. How do I know if the file is corrupted? How do I solve this? info from mediainfo Format : Matroska File size : 69.4 MiB Duration : 21mn 48s Overall bit rate : 445 Kbps Encoded date : UTC 2009-11-20 18:33:49 Writing application : mkvmerge v2.9.7 ('Tenderness') built on Jul 1 2009 18:43:35 Writing library : libebml v0.7.7 + libmatroska v0.8.1 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 2 frames Format settings, GOP : N=1 Codec ID : V_MPEG4/ISO/AVC Duration : 21mn 48s Width : 640 pixels Height : 352 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Audio ID : 2 Format : AAC Format/Info : Advanced Audio Codec Format profile : HE-AAC / LC Codec ID : A_AAC Duration : 21mn 48s Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz / 24.0 KHz Compression mode : Lossy

  Read the article

• How do I prevent my computer from freezing when it starts to swap?

  - by cdauth

  I work as a Java programmer, so I often have to run several programs at the same time that consume a lot of memory. When my memory is full and Linux starts swapping, my computer almost completely freezes. I can see that it is heavily writing on the hard-disk and everything reacts really slowly, often not at all. Moving the mouse in X sometimes doesn’t work at all, sometimes it has a delay of several seconds, clicking usually has a delay of several minutes. Sometimes it is possible to change to the TTY (with a long delay), there I can usually type without delay, but when I try to log in, it takes several minutes after typing in the user name until the password prompt appears, and usually an error message appears that tells me that the login timed out. So the only possibility is usually to restart the computer. I noticed that other intensive writing to the hard disk also significantly slows down my computer. Sometimes, I used rsync to limit the bandwidth when I copied files around on my own computer, as else the system would be almost unusable. How can this be? At the moment it seems more useful to me to completely turn off swapping. That might crash some processes, which is unfortunate, but the alternative at the moment is to crash all processes by turning off my computer. I am using Gentoo Linux with kernel 3.6.2-gentoo, I have a 10 GB swap partition on a HDD.

  Read the article

• Must-see sessions at TCUK11

  - by Roger Hart

  Technical Communication UK is probably the best professional conference I've been to. Last year, I spoke there on content strategy, and this year I'll be co-hosting a workshop on embedded user assistance. Obviously, I'd love people to come along to that; but there are some other sessions I'd like to flag up for anybody thinking of attending. Tuesday 20th Sept - workshops This will be my first year at the pre-conference workshop day, and I'm massively glad that our workshop hasn't been scheduled along-side the one I'm really interested in. My picks: It looks like you're embedding user assistance. Would you like help? My colleague Dom and I are presenting this one. It's our paen to Clippy, to the brilliant idea he represented, and the crashing failure he was. Less precociously, we'll be teaching embedded user assistance, Red Gate style. Statistics without maths: acquiring, visualising and interpreting your data This doesn't need to do anything apart from what it says on the tin in order to be gold dust. But given the speakers, I suspect it will. A data-informed approach is a great asset to technical communications, so I'd recommend this session to anybody event faintly interested. The speakers here have a great track record of giving practical, accessible introductions to big topics. Go along. Wednesday 21st Sept - day one There's no real need to recommend the keynote for a conference, but I will just point out that this year it's Google's Patrick Hofmann. That's cool. You know what else is cool: Focus on the user, the rest follows An intro to modelling customer experience. This is a really exciting area for tech comms, and potentially touches on one of my personal hobby-horses: the convergence of technical communication and marketing. It's all part of delivering customer experience, and knowing what your users need lets you help them, sell to them, and delight them. Content strategy year 1: a tale from the trenches It's often been observed that content strategy is great at banging its own drum, but not so hot on compelling case studies. Here you go, folks. This is the presentation I'm most excited about so far. On a mission to communicate! Skype help their users communicate, but how do they communicate with them? I guess we'll find out. Then there's the stuff that I'm not too excited by, but you might just be. The standards geeks and agile freaks can get together in a presentation on the forthcoming ISO standards for agile authoring. Plus, there's a session on VBA for tech comms. I do have one gripe about day 1. The other big UK tech comms conference, UA Europe, have - I think - netted the more interesting presentation from Ellis Pratt. While I have no doubt that his TCUK case study on producing risk assessments will be useful, I'd far rather go to his talk on game theory for tech comms. Hopefully UA Europe will record it. Thursday 22nd Sept - day two Day two has a couple of slots yet to be confirmed. The rumour is that one of them will be the brilliant "Questions and rants" session from last year. I hope so. It's not ranting, but I'll be going to: RTFMobile: beyond stating the obvious Ultan O'Broin is an engaging speaker with a lot to say, and mobile is one of the most interesting and challenging new areas for tech comms. Even if this weren't a research-based presentation from a company with buckets of technology experience, I'd be going. It is, and you should too. Pattern recognition for technical communicators One of the best things about TCUK is the tendency to include sessions that tackle the theoretical and bring them towards the practical. Kai and Chris delivered cracking and well-received talks last year, and I'm looking forward to seeing what they've got for us on some of the conceptual underpinning of technical communication. Developing an interactive non-text learning programme Annoyingly, this clashes with Pattern Recognition, so I hope at least one of the streams is recorded again this year. The idea of communicating complex information without words us fascinating and this sounds like a great example of this year's third stream: "anything but text". For the localization and DITA crowds, there's rich pickings on day two, though I'm not sure how many of those sessions I'm interested in. In the 13:00 - 13:40 slot, there's an interesting clash between Linda Urban on re-use and training content, and a piece on minimalism I'm sorely tempted by. That's my pick of #TCUK11. I'll be doing a round-up blog after the event, and probably talking a bit more about it beforehand. I'm also reliably assured that there are still plenty of tickets.

  Read the article

• (Database Design - products attributes): What is better option for product attribute database design

  - by meyosef

  Hi, I new in database design. What is better option for product attribute database design for cms?(Please suggest other options also). option 1: 1 table products{ id product_name color price attribute_name1 attribute_value1 attribute_name2 attribute_value2 attribute_name3 attribute_value3 } option 2: 3 tables products{ id product_name color price } attribute{ id name value } products_attribute{ products_id attribute_id } Thanks, Yosef

  Read the article

• WiX tricks and best practices

  - by Si

  We've been using WiX 3 for a while now, and despite the usual gripes about ease of use, it's going reasonably well. What I'm looking for is useful advice regarding: Setting up a WiX project (layout, references, file patterns) Integrating WiX into solutions, and build/release processes Configuring installers for new installations and upgrades Also interested in any good WiX hacks you'd like to share, thanks!

  Read the article

• asp.net mvc2 - controller for master page and code organization

  - by ile

  I've just finished my first ASP.NET MVC (2) CMS. Next step is to build website that will show data from CMS's database. This is website design: #1 (Red box) - displays article categories. ViewModel: public class CategoriesDisplay { public CategoriesDisplay() { } public int CategoryID { set; get; } public string CategoryTitle { set; get; } } #2 (Brown box) - displays last x articles; skips those from green box #3. Viewmodel: public class ArticleDisplay { public ArticleDisplay() { } public int CategoryID { set; get; } public string CategoryTitle { set; get; } public int ArticleID { set; get; } public string ArticleTitle { set; get; } public string URLArticleTitle { set; get; } public DateTime ArticleDate; public string ArticleContent { set; get; } } #3 (green box) - Displays last x articles. Uses the same ViewModel as brown box #2 #4 (blue box) - Displays list of upcoming events. Uses dataContext.Model.Event as ViewModel Boxes #1, #2 and #4 will repeat all over the site and they are part of Master Page. So, my question is: what is the best way to transfer this data from Model to Controller and finally to View pages? Should I make a controller for master page and ViewModel class that will wrap all this classes together OR Should I create partial Views for every of these boxes and make each of them inherit appropriate class (if it is even possible that it works this way?) OR Should I put this repeated code in all controllers and all additional data transfer via ViewData, which would be probably the worse way :) OR There is maybe a better and more simple way but I don't know/see it? Thanks in advance, Ile EDIT: If your answer is #1, then please explain how to make a controller for master page! EDIT 2: In this tutorial is described how to pass data to master page using abstract class: http://www.asp.net/LEARN/mvc/tutorial-13-cs.aspx In "Listing 5 – Controllers\MoviesController.cs", data is retrieved directly from database using LINQ, not from repository. So, I wonder if this is just in this tutorial, or there is some trick here and repository can't/shouldn't be used?

  Read the article

• Sitecore and ASP.net MVC

  - by Vinod

  We are starting off a new project with sitecore as our CMS. I was thinking of using Sitecore as the Content Authoring Tool and use ASP.net MVC as in the Content delivery(CDA) Side along with Sitecore. Would love to hear your ideas and thoughts on this. Have anybody tried this? Is sitecore and MVC competing or Complementing technologies? Any architectural ideas are welcome.

  Read the article

• Sitefinity deployment

  - by Jim Snyder

  I recently stepped into a project that is using Telerik Sitefinity CMS with custom user controls. I would like to get the developers off of the production server. Does anyone have any experience with deploying a Sitefinity site by means of publication (precompiled .DLL)? Any discussion of benefits, disadvantages, or potential issues would be welcome.

  Read the article

• java Filter URL pattern specific to request params

  - by Rohit Desai

  Hi All, We have a situation where we want to use filter for URL's containing some specific request parameters. e.g htt://mydomain.com/?id=78&formtype=simple_form&....... htt://mydomain.com/?id=788&formtype=special_form&....... and so on , id are fetched at run time, I want configure filter in web.xml only if formtype=special_form. How should achieve the solution . Can filter be configure with regex patterns? Really appreciate your help on this. Thanks, Rohit

  Read the article

• Facebook Connect Statistics

  - by thekevinscott

  All, A client is asking for Facebook Connect statistical data. Specifically, how many people have shared a link to their wall. I have a Facebook app setup but I am having trouble interpreting the statistical data. Do Facebook apps collect this data, or can anyone think of any way of gleaning this data from the past month, from server logs or something? For instance, can I look at the logs for xd_receiver.htm and see usage patterns from that, or something?

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >