Search Results

Search found 5843 results on 234 pages for 'material handling equipme'.

Page 216/234 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• BlackBerry OS 7.1 secured TLS connection is closed after very short time

  - by MrVincenzo

  To make a long story short: Same client-server configuration, same network topology, same device (Bold 9900) - works perfectly well on OS 7.0 but doesn't work as expected on OS 7.1 and the secured tls connection is being closed by the server after a very short time. My application opens a secured tls connection to a server. The connection is kept alive by a application layer keep-alive mechanism and remains open until the client closes it. Attached is a simplified version of the actual code that opens connection and reads from the socket. The code works perfectly on OS 5.0-7.0 but doesn't work as expected on OS 7.1. When running on OS 7.1, the blocking read() returns with -1 (end of the stream has been reached) after very short time (10-45 seconds). For OS 5.0-7.0 the call to read() remains blocking until next data arrives and the connection is never closed by the server. Connection connection = Connector.open(connectionString); connInputStream = connection.openInputStream(); while (true) { try { retVal = connInputStream.read(); if (-1 == retVal) { break; // end of stream has been reached } } catch (Exception e ) { // do error handling } // data read from stream is handled here } UPDATE 1: Apparently, the problem appears only when I use secured tls connection (either using mobile network or WiFi) on OS 7.1. Everything works as expected when opening a non secured connection on OS 7.1. For tls on mobile networks I use the following connection string: connectionString = "tls://someipaddress:443;deviceside=false;ConnectionType=mds-public;EndToEndDesired"; For tls on Wifi I use the following connection string: connectionString = "tls://someipaddress:443;deviceside=true;interface=wifi;EndToEndRequired" UPDATE 2: The connection is never idle. I am constantly receiving and sending data on it. The issue appears both when using mobile connection and WiFi. The issue appears both on real OS 7.1 devices and simulators. I am starting to suspect that it is somehow related either to the connection string I am using or to the tls handshake. UPDATE 3: According to Wireshark's captures that I made with the OS 7.1 simulator, the secured tls connection is being closed by the server (client receives FIN). For the moment I don't have the server's private key therefore I unable to debug the tls handshake.

  Read the article

• How do I write object classes effectively when dealing with table joins?

  - by Chris

  I should start by saying I'm not now, nor do I have any delusions I'll ever be a professional programmer so most of my skills have been learned from experience very much as a hobby. I learned PHP as it seemed a good simple introduction in certain areas and it allowed me to design simple web applications. When I learned about objects, classes etc the tutor's basic examnples covered the idea that as a rule of thumb each database table should have its own class. While that worked well for the photo gallery project we wrote, as it had very simple mysql queries, it's not working so well now my projects are getting more complex. If I require data from two separate tables which require a table join I've instead been ignoring the class altogether and handling it on a case by case basis, OR, even worse been combining some of the data into the class and the rest as a separate entity and doing two queries, which to me seems inefficient. As an example, when viewing content on a forum I wrote, if you view a thread, I retrieve data from the threads table, the posts table and the user table. The queries from the user and posts table are retrieved via a join and not instantiated as an object, whereas the thread data is called using my Threads class. So how do I get from my current state of affairs to something a little less 'stupid', for want of a better word. Right now I have a DB class that deals with connection and escaping values etc, a parent db query class that deals with the common queries and methods, and all of the other classes (Thread, Upload, Session, Photo and ones thats aren't used Post, User etc ) are children of that. Do I make a big posts class that has the relevant extra attributes that I retrieve from the users (and potentially threads) table? Do I have separate classes that populate each of their relevant attributes with a single query? If so how do I do that? Because of the way my classes are written, based on what I was taught, my db update row method, or insert method both just take the attributes as an array and update all of that, if I have extra attributes from other db tables in each class then how do I rewrite those methods as obbiously updating automatically like that would result in errors? In short I think my understanding is limited right now and I'd like some pointers when it comes to the fundamentals of how to write more complex classes.

  Read the article

• Advice on "Invalid Pointer Operation" when using complex records

  - by Xaz

  Env: Delphi 2007 <JustificationI tend to use complex records quite frequently as they offer almost all of the advantages of classes but with much simpler handling.</Justification Anyhoo, one particularly complex record I have just implemented is trashing memory (later leading to an "Invalid Pointer Operation" error). This is an example of the memory trashing code: sSignature := gProfiles.Profile[_stPrimary].Signature.Formatted(True); On the second time i call it i get "Invalid Pointer Operation" It works OK if i call it like this: AProfile := gProfiles.Profile[_stPrimary]; ASignature := AProfile.Signature; sSignature := ASignature.Formatted(True); Background Code: gProfiles: TProfiles; TProfiles = Record private FPrimaryProfileID: Integer; FCachedProfile: TProfile; ... public < much code removed > property Profile[ProfileType: TProfileType]: TProfile Read GetProfile; end; function TProfiles.GetProfile(ProfileType: TProfileType): TProfile; begin case ProfileType of _stPrimary : Result := ProfileByID(FPrimaryProfileID); ... end; end; function TProfiles.ProfileByID(iID: Integer): TProfile; begin <snip> if LoadProfileOfID(iID, FCachedProfile) then begin Result := FCachedProfile; end else ... end; TProfile = Record private ... public ... Signature: TSignature; ... end; TSignature = Record private public PlainTextFormat : string; HTMLFormat : string; // The text to insert into a message when using this profile function Formatted(bHTML: boolean): string; end; function TSignature.Formatted(bHTML: boolean): string; begin if bHTML then result := HTMLFormat else result := PlainTextFormat; < SNIP MUCH CODE > end; OK, so I have a record within a record within a record, which is approaching Inception level confusion and I'm the first to admit is not really a good model. Clearly i am going to have to restructure it. What I would like from you gurus is a better understanding of why it is trashing the memory (something to do with the string object that is created then freed...) so that i can avoid making these kinds of errors in future. Thanks

  Read the article

• Architecture Suggestions/Recommendations for a Web Application with Sub-Apps

  - by user579218

  Hello. I’m starting to plan an architecture for a big web application, and I wanted to get suggestions and/or recommendations on where to begin and which technologies and/or frameworks to use. The application will be an Intranet-based web site using Windows authentication, running on IIS and using SQL Server and ASP.NET. It’ll need to be structured as a main/shell application with sub-applications that are “pluggable” based on some configuration settings. The main or shell application is to provide the overall user interface structure – header/footer, dynamically built tabs for each available sub-app, and a content area in which the sub-application will be loaded when the user clicks on the sub-application’s tab. So, on start-up of the main/shell application, configuration information will be queried from a database, and, based on the user and which of the sub-apps are available, the main or shell app would dynamically build tabs (or buttons or something) as a way to access each individual application. On start-up, the content area will be populated with the “home” sub-app. But, clicking on an sub-app tab will cause the content area to be populated with the sub-app corresponding to the tab. For example, we’re going to have a reports application, a display application, and probably a couple other distinct applications. On startup of the main/shell application, after determining who the user is, the main app will query the database to determine which sub-apps the user can use and build out the UI. Then the user can navigate between available sub-apps and do their work in each. Finally, the entire app and all sub-apps need to be a layered design with presentation, service, business, and data access layers, as well as cross-cutting objects for things such as logging, exception handling, etc. Anyway, my questions revolve around where to begin to plan something like this application. What technologies/frameworks would work best in developing a solution for this application? MVC? MVP? WCSF? EF? NHibernate? Enterprise Library? Repository Pattern? Others???? I know all these technologies/frameworks are not used for the same purpose, but knowing which ones to focus on is a little overwhelming. Which ones would be the best choice(s) for a solution? Which ones work well together for an end-to-end design? How would one structure the VS project for something like this? Thanks!

  Read the article

• Getting caught in loops - R

  - by user334898

  I am looking at whether or not certain 'systems' for betting really do work as claimed, namely, that they have a positive expectation. One such system is based on the rebate on loss. You basically have a large master pot, say $1 million. Your bankroll for each game is $50k. The way it works, is as follows: 1) Start with $50k, always bet on banker 2) If you win, add the money to the master pot. Then play again with $50k. 3) If you lose(now you're at $30k) play till you either: (a) hit 0, you get a rebate of 10%. Begin playing again with $50k+5k=$55k. (b) If you win more than the initial bankroll, add the money to the master pot. Then play again with $50k. 4) Continue until you double the master pot. I just cant find an easy way of programming out the possible cases in R, since you can eventually go down an improbable path. For example, you start at 50k, lose 20, win 19, now you're at 49, now you lose 20, lose 20, now youre at 9, you either lose 9 and get back 5k or you win and this cycle continues until you either end up with more than 50k or hit 0 and get the rebate on the 50k and start again with $50k +5k. Here's some code i started, but i havent figured out a good way of handling the cases where you get stuck and keeping track of the number of games played. Thanks again for your help. Obviously, I understand you may be busy and not have time. p.loss <- .4462466 p.win <- .4585974 p.tie <- 1 - (p.win+p.loss) prob <- c(p.win,p.tie,p.loss) bet<-20 x <- c(19,0,-20) r <- 10 # rebate = 20% br.i <- 50 br<-200 #for(i in 1:100){ # cbr.i<-0 y <- sample(x,1,replace=T,prob) cbr.i<-y+br.i if(cbr.i > br.i){ br<-br+(cbr.i-br.i); cbr.i<-br.i; }else{ y <- sample(x,2,replace=T,prob); if( sum(y)< cbr.i ){ cbr.i<-br.i+(1/r)*br.i; br<-br-br.i} cbr.i<-y+ }else{ cbr.i<- sum(y) + cbr.i; }if(cbr.i <= bet){ y <- sample(x,1,replace=T,prob) if(abs(y)>cbr.i){ cbr.i<-br.i+(1/r)*br.i } }

  Read the article

• Is it possible to use .data() as a search criteria?

  - by Andrew

  I have a pretty complex chat application going on, and there are multiple chat panes, chat entries, chat submits, etc. going on in the same window. At first I was going to do something like.... <input type="text" class="chattext" id="chattext-42"> <input type="text" class="chattext" id="chattext-93"> <input type="button" class="chatsubmit" id="chatsubmit-42"> <input type="button" class="chatsubmit" id="chatsubmit-93"> ... etc. (of course this is vastly simplified, they'd be in separate divs, separate visibilities, etc) So, when they clicked on a .chatsubmit, it would then get the id of that and find the last two characters for the chat ID. This presents some problems, as it would require rewrites if IDs changed lengths, and seems just plain inelegant to me. I then remembered the .data() facility in jQuery... I thought, maybe I could do it more like this: <input type="text" class="chattext"> ... and add a .data("id", 42) to this one <input type="button" class="chatsubmit"> ... and add a .data("id", 42) So that when they click chatsubmit, it gets the ID, and then finds the chattext with that ID and processes it. But looking at the documentation, I don't see an easy way to search by this. For example, let's say the event target in this case is the chatsubmit with the data('id') of 42... var ID = $(event.target).data('id'); // Sets it to 42 var chattext = ... And here I run into the trouble. How do I find which DOM element matches a class of chattext and a data('id') of 42? Is there any easy method, or do I have to search every .chattext for the one with an id of 42? Or is there another easy way of doing this? I did consider the possibility of the container div having the ID, which would make it, I think,? slightly easier to get. But if this works, it could be dealing with things in other container divs as well, making that not a long-term solution. Edit: Literally seconds after posting this, I found this: http://james.padolsey.com/javascript/extending-jquerys-selector-capabilities/ which includes information on extending the selector to data. So I'll try that out, and in the meantime, is this a completely foolhardy way of handling this?

  Read the article

• Binding on a port with netpipes/netcat

  - by mindas

  I am trying to write a simple bash script that is listening on a port and responding with a trivial HTTP response. My specific issue is that I am not sure if the port is available and in case of bind failure I fall back to next port until bind succeeds. So far to me the easiest way to achieve this was something like: for (( i=$PORT_BASE; i < $(($PORT_BASE+$PORT_RANGE)); i++ )) do if [ $DEBUG -eq 1 ] ; then echo trying to bind on $i fi /usr/bin/faucet $i --out --daemon echo test 2>/dev/null if [ $? -eq 0 ] ; then #success? port=$i if [ $DEBUG -eq 1 ] ; then echo "bound on port $port" fi break fi done Here I am using faucet from netpipes Ubuntu package. The problem with this is that if I simply print "test" to the output, curl complains about non-standard HTTP response (error code 18). That's fair enough as I don't print HTTP-compatible response. If I replace echo test with echo -ne "HTTP/1.0 200 OK\r\n\r\ntest", curl still complains: user@server:$ faucet 10020 --out --daemon echo -ne "HTTP/1.0 200 OK\r\n\r\ntest" ... user@client:$ curl ip.of.the.server:10020 curl: (56) Failure when receiving data from the peer I think the problem lies in how faucet is printing the response and handling the connection. For example if I do the server side in netcat, curl works fine: user@server:$ echo -ne "HTTP/1.0 200 OK\r\n\r\ntest\r\n" | nc -l 10020 ... user@client:$ curl ip.of.the.server:10020 test user@client:$ I would be more than happy to replace faucet with netcat in my main script, but the problem is that I want to spawn independent server process to be able to run client from the same base shell. faucet has a very handy --daemon parameter as it forks to background and I can use $? (exit status code) to check if bind succeeded. If I was to use netcat for a similar purpose, I would have to fork it using & and $? would not work. Does anybody know why faucet isn't responding correctly in this particular case and/or can suggest a solution to this problem. I am not married neither to faucet nor netcat but would like the solution to be implemented using bash or it's utilities (as opposed to write something in yet another scripting language, such as Perl or Python).

  Read the article

• Controlling the USB from Windows

  - by b-gen-jack-o-neill

  Hi, I know this probably is not the easiest thing to do, but I am trying to connect Microcontroller and PC using USB. I dont want to use internal USART of Microcontroller or USB to RS232 converted, its project indended to help me understand various principles. So, getting the communication done from the Microcontroller side is piece of cake - I mean, when I know he protocol, its relativelly easy to implement it on Micro, becouse I am in direct control of evrything, even precise timing. But this is not the case of PC. I am not very familiar with concept of Windows handling the devices connected. In one of my previous question I ask about how Windows works with devices thru drivers. I understood that for internal use of Windows, drivers must have some default set of functions available to OS. I mean, when OS wants to access HDD, it calls HDD driver (which is probably internal in OS), with specific "questions" so that means that HDD driver has to be written to cooperate with Windows, to have write function in the proper place to be called by the OS. Something similiar is for GPU, Even DirectX, I mean DirectX must call specific functions from drivers, so drivers must be written to work with DX. I know, many functions from WinAPI works on their own, but even "simple" window must be in the end written into framebuffer, using MMIO to adress specified by drivers. Am I right? So, I expected that Windows have internal functions, parts of WinAPI designed to work with certain comonly used things. To call manufacturer-designed drivers. But this seems to not be entirely true becouse Windows has no way to communicate thru Paralel port. I mean, there is no function in the WinAPI to work with serial port, but there are funcions to work with HDD,GPU and so. But now there comes the part I am getting very lost at. So, I think Windows must have some built-in functions to communicate thru USB, becouse for example it handles USB flash memory. So, is there any WinAPI function designed to let user to operate USB thru that function, or when I want to use USB myself, do I have to call desired USB-driver function myself? Becouse all you need to send to USB controller is device adress and the infromation right? I mean, I don´t have to write any new drivers, am I right? Just to call WinAPI function if there is such, or directly call original USB driver. Does any of this make some sense?

  Read the article

• jQuery .load(), don't show new content until images loaded

  - by Jarred

  Hi. I have been working on a jQuery photo slideshow. It scales the images to the browser size, and slides them left and right. There is no pre-determined size or aspect ratio, the script does everything on the fly. It requires that all images be fully loaded, so it can custom resize each individual image based on it's own aspect ratio ( width():height(), etc ), calculate the width of containing div, and calculate the slide distance from one image to another. As a stand-alone, it works pretty well (despite my lack of skills)! I simply hide the slideshow containing div at (document).ready, allow the images to load, then run the slideshow prep scripts at (window).load. Once this is done, it only then makes the slideshow divs, images, etc appear, properly sized, positioned and ready to roll. The ultimate goal is to be able to load in any number of slideshows without refreshing the page. The point of this is to be able to play uninterrupted background music. I know music on websites is annoying, but the target market likes it, a lot! I am using (target).load(page.php .element, function prepInsertNewShow() { //Prepare slideshow resizeImages(); slideArray(); //Show slideshow (target).fadeIn(); }); and it definitely works! The problem is that I cannot find a way to hold off on preparing and showing the new content until the images have finished loading. It is running the slideshow prep scripts (which are totally dependent on the images being fully loaded), before the images are loaded. This results in a completely jacked up show! What I want to do is this - (target).load(page.php .element, function prepInsertNewShow() { //Wait until images are loaded $('img').load( function() { //Prepare slideshow resizeImages(); slideArray(); //Show slideshow (target).fadeIn(); } }); But this doesn't seem to work, the new content is never shown. You can see a live version here. The initial gallery loads correctly, everything looks good. The only nav link that works is Galleries Engagement, which will load a new show (a containing div with multiple <img> tags). You will see that the images are not centered, the containing div and slide distances are much too small, as they were calculated using images that were not actually loaded. Is there any way I can delay handling and showing new content until it is fully loaded? Any suggestions would be most appreciated, thanks for your time! PS - It just occurred to me while typing this that a decent solution may be to insert "width=x" height="x" into the <img> tags, so the script can work from those values, even if the images have not loaded...hmm...

  Read the article

• Large transactions causing "System.Data.SqlClient.SqlException: Timeout expired" error?

  - by Michael

  My application requires a user to log in and allows them to edit a list of things. However, it seems that if the same user always logs in and out and edits the list, this user will run into a "System.Data.SqlClient.SqlException: Timeout expired." error. I've read comments about increasing the timeout period but I've also read a comment about it possibly caused by uncommitted transactions. And I do have one going in the application. I'll provide the code I'm working with and there is an IF statement in there that I was a little iffy about but it seemed like a reasonable thing to do. I'll just go over what's going on here, there is a list of objects to update or add into the database. New objects created in the application are given an ID of 0 while existing objects have their own ID's generated from the DB. If the user chooses to delete some objects, their IDs are stored in a separate list of Integers. Once the user is ready to save their changes, the two lists are passed into this method. By use of the IF statement, objects with ID of 0 are added (using the Add stored procedure) and those objects with non-zero IDs are updated (using the Update stored procedure). After all this, a FOR loop goes through all the integers in the "removal" list and uses the Delete stored procedure to remove them. A transaction is used for all this. Public Shared Sub UpdateSomethings(ByVal SomethingList As List(Of Something), ByVal RemovalList As List(Of Integer)) Using DBConnection As New SqlConnection(conn) DBConnection.Open() Dim MyTransaction As SqlTransaction MyTransaction = DBConnection.BeginTransaction() Try For Each SomethingItem As Something In SomethingList Using MyCommand As New SqlCommand() MyCommand.Connection = DBConnection If SomethingItem.ID > 0 Then MyCommand.CommandText = "UpdateSomething" Else MyCommand.CommandText = "AddSomething" End If MyCommand.Transaction = MyTransaction MyCommand.CommandType = CommandType.StoredProcedure With MyCommand.Parameters If MyCommand.CommandText = "UpdateSomething" Then .Add("@id", SqlDbType.Int).Value = SomethingItem.ID End If .Add("@stuff", SqlDbType.Varchar).Value = SomethingItem.Stuff End With MyCommand.ExecuteNonQuery() End Using Next For Each ID As Integer In RemovalList Using MyCommand As New SqlCommand("DeleteSomething", DBConnection) MyCommand.Transaction = MyTransaction MyCommand.CommandType = CommandType.StoredProcedure With MyCommand.Parameters .Add("@id", SqlDbType.Int).Value = ID End With MyCommand.ExecuteNonQuery() End Using Next MyTransaction.Commit() Catch ex As Exception MyTransaction.Rollback() 'Exception handling goes here End Try End Using End Sub There are three stored procedures used here as well as some looping so I can see how something can be holding everything up if the list is large enough. Other users can log in to the system at the same time just fine though. I'm using Visual Studio 2008 to debug and am using SQL Server 2000 for the DB.

  Read the article

• avoiding enums as interface identifiers c++ OOP

  - by AlasdairC

  Hi I'm working on a plugin framework using dynamic loaded shared libraries which is based on Eclipse's (and probally other's) extension-point model. All plugins share similar properties (name, id, version etc) and each plugin could in theory satisfy any extension-point. The actual plugin (ie Dll) handling is managed by another library, all I am doing really is managing collections of interfaces for the application. I started by using an enum PluginType to distinguish the different interfaces, but I have quickly realised that using template functions made the code far cleaner and would leave the grunt work up to the compiler, rather than forcing me to use lots of switch {...} statements. The only issue is where I need to specify like functionality for class members - most obvious example is the default plugin which provides a particular interface. A Settings class handles all settings, including the default plugin for an interface. ie Skin newSkin = settings.GetDefault<ISkin>(); How do I store the default ISkin in a container without resorting to some other means of identifying the interface? As I mentioned above, I currently use a std::map<PluginType, IPlugin> Settings::defaults member to achieve this (where IPlugin is an abstract base class which all plugins derive from. I can then dynamic_cast to the desired interface when required, but this really smells of bad design to me and introduces more harm than good I think. would welcome any tips edit: here's an example of the current use of default plugins typedef boost::shared_ptr<ISkin> Skin; typedef boost::shared_ptr<IPlugin> Plugin; enum PluginType { skin, ..., ... } class Settings { public: void SetDefault(const PluginType type, boost::shared_ptr<IPlugin> plugin) { m_default[type] = plugin; } boost::shared_ptr<IPlugin> GetDefault(const PluginType type) { return m_default[type]; } private: std::map<PluginType, boost::shared_ptr<IPlugin> m_default; }; SkinManager::Initialize() { Plugin thedefault = g_settings.GetDefault(skinplugin); Skin defaultskin = boost::dynamic_pointer_cast<ISkin>(theskin); defaultskin->Initialize(); } I would much rather call the getdefault as the following, with automatic casting to the derived class. However I need to specialize for every class type. template<> Skin Settings::GetDefault<ISkin>() { return boost::dynamic_pointer_cast<ISkin>(m_default(skin)); }

  Read the article

• Android: How to properly exit application when inconsistent condition is unavoidable?

  - by Bevor

  First of all I already read about all this discussion that it isn't a good idea to manually exit an Android application. But in my case it seems to be needed. I have an AsyncTask which does a lof of operations in background. That means downloading data, saving it to local storage and preparing it for usage in application. It could happen that there is no internet connection or something different happens. For all that cases I have an Exception handling which returns the result. And if there is an exception, the application is unusable so I need to exit it. My question is, do I have to do some unregistration unloading or unbinding tasks or something when I exit the application by code or is System.exit(0) ok? I do all this in an AsyncTask, see my example: public class InitializationTask extends AsyncTask<Void, Void, InitializationResult> { private ProcessController processController = new ProcessController(); private ProgressDialog progressDialog; private Activity mainActivity; public InitializationTask(Activity mainActivity) { this.mainActivity = mainActivity; } @Override protected void onPreExecute() { super.onPreExecute(); progressDialog = new ProgressDialog(mainActivity); progressDialog.setMessage("Die Daten werden aufbereitet.\nBitte warten..."); progressDialog.setIndeterminate(true); //means that the "loading amount" is not measured. progressDialog.setCancelable(false); progressDialog.show(); }; @Override protected InitializationResult doInBackground(Void... params) { return processController.initializeData(); } @Override protected void onPostExecute(InitializationResult result) { super.onPostExecute(result); progressDialog.dismiss(); if (!result.isValid()) { AlertDialog.Builder dialog = new AlertDialog.Builder(mainActivity); dialog.setTitle("Initialisierungsfehler"); dialog.setMessage(result.getReason()); dialog.setPositiveButton("Ok", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { dialog.cancel(); //TODO cancel application System.exit(0); } }); dialog.show(); } } }

  Read the article

• Guilty of unsound programming

  - by TelJanini

  I was reading Robert Rossney's entry on "What's the most unsound program you've had to maintain?" found at: (What's the most unsound program you've had to maintain?) when I realized that I had inadvertently developed a near-identical application! The app consists of an HTTPListener object that grabs incoming POST requests. Based on the information in the header, I pass the body of the request to SQL Server to perform the appropriate transaction. The requests look like: <InvoiceCreate Control="389> <Invoice> <CustomerNumber>5555</CustomerNumber> <Total>300.00</Total> <RushOrder>1</RushOrder> </Invoice> </InvoiceCreate> Once it's received by the HTTPListener object, I perform the required INSERT to the Invoice table using SQL Server's built-in XML handling functionality via a stored procedure: INSERT INTO Invoice (InvoiceNumber, CustomerNumber, Total, RushOrder) SELECT @NEW_INVOICE_NUMBER, @XML.value('(InvoiceCreate/Invoice/CustomerNumber)[1]', 'varchar(10)'), @XML.value('(InvoiceCreate/Invoice/Total)[1]', 'varchar(10)'), @XML.value('(InvoiceCreate/Invoice/Total)[1]', 'varchar(10)') I then use another SELECT statement in the same stored procedure to return the value of the new Invoice Number that was inserted into the Invoices table: SELECT @NEW_INVOICE_NUMBER FOR XML PATH 'InvoiceCreateAck' I then read the generated XML using a SQL data reader object in C# and use it as the response of the HTTPListener object. My issue is, I'm noticing that Robert is indeed correct. All of my application logic exists inside the stored procedure, so I find myself having to do a lot of error-checking (i.e. validating the customer number and invoicenumber values) inside the stored procedure. I'm still a midlevel developer, and as such, am looking to improve. Given the original post, and my current architecture, what could I have done differently to improve the application? Are there any patterns or best practices that I could refer to? What approach would you have taken? I'm open to any and all criticism, as I'd like to do my part to reduce the amount of "unsound programming" in the world.

  Read the article

• list images from directory by function

  - by osc2nuke

  i'm using this function: function getmyimages($qid){ $imgdir = 'modules/Projects/uploaded_project_images/'. $qid .''; // the directory, where your images are stored $allowed_types = array('png','jpg','jpeg','gif'); // list of filetypes you want to show $dimg = opendir($imgdir); while($imgfile = readdir($dimg)) { if(in_array(strtolower(substr($imgfile,-3)),$allowed_types)) { $a_img[] = $imgfile; sort($a_img); reset ($a_img); } } $totimg = count($a_img); // total image number for($x=0; $x < $totimg; $x++) { $size = getimagesize($imgdir.'/'.$a_img[$x]); // do whatever $halfwidth = ceil($size[0]/2); $halfheight = ceil($size[1]/2); $mytest = 'name: '.$a_img[$x].' width: '.$size[0].' height: '.$size[1].'<br /><a href="'. $imgdir .'/'.$a_img[$x].'">'. $a_img[$x]. '</a>'; } return $mytest; } And i call this function between a while row as: $sql_select = $db->sql_query('SELECT * from '.$prefix.'_projects WHERE topic=\''.$cid.'\''); OpenTable(); while ($row2 = $db->sql_fetchrow($sql_select)){ $qid = $row2['qid']; $project_query = $db->sql_query('SELECT p.uid, p.uname, p.subject, p.story, p.storyext, p.date, p.topic, p.pdate, p.materials, p.bidoptions, p.projectduration, pd.id_duration, pm.material_id, pbo.bidid, pc.cid FROM ' . $prefix . '_projects p, ' . $prefix . '_projects_duration pd, ' . $prefix . '_project_materials pm, ' . $prefix . '_project_bid_options pbo, ' . $prefix . '_project_categories pc WHERE p.topic=\''.$cid.'\' and p.qid=\''.$qid.'\' and p.bidoptions=pbo.bidid and p.materials=pm.material_id and p.projectduration=pd.id_duration'); while ($project_row = $db->sql_fetchrow($project_query)) { //$qid = $project_row['qid']; $uid = $project_row['uid']; $uname = $project_row['uname']; $subject = $project_row['subject']; $story = $project_row['story']; $storyext = $project_row['storyext']; $date = $project_row['date']; $topic = $project_row['topic']; $pdate = $project_row['pdate']; $materials = $project_row['materials']; $bidoptions = $project_row['bidoptions']; $projectduration = $project_row['projectduration']; //Get the topic name $topic_query = $db->sql_query('SELECT cid,title from '.$prefix.'_project_categories WHERE cid =\''.$cid.'\''); while ($topic_row = $db->sql_fetchrow($topic_query)) { $topic_id = $topic_row['cid']; $topic_title = $topic_row['title']; } //Get the material text $material_query = $db->sql_query('SELECT material_id,material_name from '.$prefix.'_project_materials WHERE material_id =\''.$materials.'\''); while ($material_row = $db->sql_fetchrow($material_query)) { $material_id = $material_row['material_id']; $material_name = $material_row['material_name']; } //Get the bid methode $bid_query = $db->sql_query('SELECT bidid,bidname from '.$prefix.'_project_bid_options WHERE bidid =\''.$bidoptions.'\''); while ($bid_row = $db->sql_fetchrow($bid_query)) { $bidid = $bid_row['bidid']; $bidname = $bid_row['bidname']; } //Get the project duration $duration_query = $db->sql_query('SELECT id_duration,duration_value,duration_alias from '.$prefix.'_projects_duration WHERE id_duration =\''.$projectduration.'\''); while ($duration_row = $db->sql_fetchrow($duration_query)) { $id_duration = $duration_row['id_duration']; $duration_value = $duration_row['duration_value']; $duration_alias = $duration_row['duration_alias']; } } echo '<br/><b>id</b>--->' .$qid. '<br/><b>uid</b>--->' .$uid. '<br/><b>username</b>--->' .$uname. '<br/><b>subject</b>--->'.$subject. '<br/><b>story1</b>--->'.$story. '<br/><b>story2</b>--->'.$storyext. '<br/><b>postdate</b>--->'.$date. '<br/><b>categorie</b>--->'.$topic_title . '<br/><b>project start</b>--->'.$pdate. '<br/><b>materials</b>--->'.$material_name. '<br/><b>bid methode</b>--->'.$bidname. '<br/><b>project duration</b>--->'.$duration_alias.'<br /><br /><br/><b>image url</b>--->'.getmyimages($qid).'<br /><br />'; } CloseTable(); the result outputs only the "last" file from the directories. if i do a echo instead of a return $mytest; it read the whole directory but ruïns the output.

  Read the article

• Why Swift is 100 times slower than C in this image processing test?

  - by xiaobai

  Like many other developers I have been very excited at the new Swift language from Apple. Apple has boasted its speed is faster than Objective C and can be used to write operating system. And from what I learned so far, it's a very type-safe language and able to have precisely control over the exact data type (like integer length). So it does look like having good potential handling performance critical tasks, like image processing, right? That's what I thought before I carried out a quick test. The result really surprised me. Here is a much simplified image alpha blending code snippet in C: test.c: #include <stdio.h> #include <stdint.h> #include <string.h> uint8_t pixels[640*480]; uint8_t alpha[640*480]; uint8_t blended[640*480]; void blend(uint8_t* px, uint8_t* al, uint8_t* result, int size) { for(int i=0; i<size; i++) { result[i] = (uint8_t)(((uint16_t)px[i]) *al[i] /255); } } int main(void) { memset(pixels, 128, 640*480); memset(alpha, 128, 640*480); memset(blended, 255, 640*480); // Test 10 frames for(int i=0; i<10; i++) { blend(pixels, alpha, blended, 640*480); } return 0; } I compiled it on my Macbook Air 2011 with the following command: gcc -O3 test.c -o test The 10 frame processing time is about 0.01s. In other words, it takes the C code 1ms to process one frame: $ time ./test real 0m0.010s user 0m0.006s sys 0m0.003s Then I have a Swift version of the same code: test.swift: let pixels = UInt8[](count: 640*480, repeatedValue: 128) let alpha = UInt8[](count: 640*480, repeatedValue: 128) let blended = UInt8[](count: 640*480, repeatedValue: 255) func blend(px: UInt8[], al: UInt8[], result: UInt8[], size: Int) { for(var i=0; i<size; i++) { var b = (UInt16)(px[i]) * (UInt16)(al[i]) result[i] = (UInt8)(b/255) } } for i in 0..10 { blend(pixels, alpha, blended, 640*480) } The build command line is: xcrun swift -O3 test.swift -o test Here I use the same O3 level optimization flag to make the comparison hopefully fair. However, the resulting speed is 100 time slower: $ time ./test real 0m1.172s user 0m1.146s sys 0m0.006s In other words, it takes Swift ~120ms to processing one frame which takes C just 1 ms. I also verified the memory initialization time in both test code are very small compared to the blend processing function time. What happened?

  Read the article

• Why is Java EE 6 better than Spring ?

  - by arungupta

  Java EE 6 was released over 2 years ago and now there are 14 compliant application servers. In all my talks around the world, a question that is frequently asked is Why should I use Java EE 6 instead of Spring ? There are already several blogs covering that topic: Java EE wins over Spring by Bill Burke Why will I use Java EE instead of Spring in new Enterprise Java projects in 2012 ? by Kai Waehner (more discussion on TSS) Spring to Java EE migration (Part 1 and 2, 3 and 4 coming as well) by David Heffelfinger Spring to Java EE - A Migration Experience by Lincoln Baxter Migrating Spring to Java EE 6 by Bert Ertman and Paul Bakker at NLJUG Moving from Spring to Java EE 6 - The Age of Frameworks is Over at TSS Java EE vs Spring Shootout by Rohit Kelapure and Reza Rehman at JavaOne 2011 Java EE 6 and the Ewoks by Murat Yener Definite excuse to avoid Spring forever - Bert Ertman and Arun Gupta I will try to share my perspective in this blog. First of all, I'd like to start with a note: Thank you Spring framework for filling the interim gap and providing functionality that is now included in the mainstream Java EE 6 application servers. The Java EE platform has evolved over the years learning from frameworks like Spring and provides all the functionality to build an enterprise application. Thank you very much Spring framework! While Spring was revolutionary in its time and is still very popular and quite main stream in the same way Struts was circa 2003, it really is last generation's framework - some people are even calling it legacy. However my theory is "code is king". So my approach is to build/take a simple Hello World CRUD application in Java EE 6 and Spring and compare the deployable artifacts. I started looking at the official tutorial Developing a Spring Framework MVC Application Step-by-Step but it is using the older version 2.5. I wasn't able to find any updated version in the current 3.1 release. Next, I downloaded Spring Tool Suite and thought that would provide some template samples to get started. A least a quick search did not show any handy tutorials - either video or text-based. So I searched and found a link to their SVN repository at src.springframework.org/svn/spring-samples/. I tried the "mvc-basic" sample and the generated WAR file was 4.43 MB. While it was named a "basic" sample it seemed to come with 19 different libraries bundled but it was what I could find: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/joda-time-jsptags-1.0.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar And it is not even using any database! The app deployed fine on GlassFish 3.1.2 but the "@Controller Example" link did not work as it was missing the context root. With a bit of tweaking I could deploy the application and assume that the account got created because no error was displayed in the browser or server log. Next I generated the WAR for "mvc-ajax" and the 5.1 MB WAR had 20 JARs (1 removed, 2 added): ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.6.4.jar./WEB-INF/lib/jackson-mapper-asl-1.6.4.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar 2 more JARs for just doing Ajax. Anyway, deploying this application gave the following error: Caused by: java.lang.NoSuchMethodError: org.codehaus.jackson.map.SerializationConfig.<init>(Lorg/codehaus/jackson/map/ClassIntrospector;Lorg/codehaus/jackson/map/AnnotationIntrospector;Lorg/codehaus/jackson/map/introspect/VisibilityChecker;Lorg/codehaus/jackson/map/jsontype/SubtypeResolver;)V    at org.springframework.samples.mvc.ajax.json.ConversionServiceAwareObjectMapper.<init>(ConversionServiceAwareObjectMapper.java:20)    at org.springframework.samples.mvc.ajax.json.JacksonConversionServiceConfigurer.postProcessAfterInitialization(JacksonConversionServiceConfigurer.java:40)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsAfterInitialization(AbstractAutowireCapableBeanFactory.java:407) Seems like some incorrect repos in the "pom.xml". Next one is "mvc-showcase" and the 6.49 MB WAR now has 28 JARs as shown below: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/aspectjrt-1.6.10.jar./WEB-INF/lib/commons-fileupload-1.2.2.jar./WEB-INF/lib/commons-io-2.0.1.jar./WEB-INF/lib/el-api-2.2.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.8.1.jar./WEB-INF/lib/jackson-mapper-asl-1.8.1.jar./WEB-INF/lib/javax.inject-1.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/jdom-1.0.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-api-1.2.jar./WEB-INF/lib/jstl-impl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/rome-1.0.0.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.1.0.RELEASE.jar./WEB-INF/lib/spring-asm-3.1.0.RELEASE.jar./WEB-INF/lib/spring-beans-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-support-3.1.0.RELEASE.jar./WEB-INF/lib/spring-core-3.1.0.RELEASE.jar./WEB-INF/lib/spring-expression-3.1.0.RELEASE.jar./WEB-INF/lib/spring-web-3.1.0.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.1.0.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar The app at least deployed and showed results this time. But still no database! Next I tried building "jpetstore" and got the error: [ERROR] Failed to execute goal on project org.springframework.samples.jpetstore:Could not resolve dependencies for project org.springframework.samples:org.springframework.samples.jpetstore:war:1.0.0-SNAPSHOT: Failed to collect dependencies for [commons-fileupload:commons-fileupload:jar:1.2.1 (compile), org.apache.struts:com.springsource.org.apache.struts:jar:1.2.9 (compile), javax.xml.rpc:com.springsource.javax.xml.rpc:jar:1.1.0 (compile), org.apache.commons:com.springsource.org.apache.commons.dbcp:jar:1.2.2.osgi (compile), commons-io:commons-io:jar:1.3.2 (compile), hsqldb:hsqldb:jar:1.8.0.7 (compile), org.apache.tiles:tiles-core:jar:2.2.0 (compile), org.apache.tiles:tiles-jsp:jar:2.2.0 (compile), org.tuckey:urlrewritefilter:jar:3.1.0 (compile), org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-orm:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-context-support:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework.webflow:spring-js:jar:2.0.7.RELEASE (compile), org.apache.ibatis:com.springsource.com.ibatis:jar:2.3.4.726 (runtime), com.caucho:com.springsource.com.caucho:jar:3.2.1 (compile), org.apache.axis:com.springsource.org.apache.axis:jar:1.4.0 (compile), javax.wsdl:com.springsource.javax.wsdl:jar:1.6.1 (compile), javax.servlet:jstl:jar:1.2 (runtime), org.aspectj:aspectjweaver:jar:1.6.5 (compile), javax.servlet:servlet-api:jar:2.5 (provided), javax.servlet.jsp:jsp-api:jar:2.1 (provided), junit:junit:jar:4.6 (test)]: Failed to read artifact descriptor for org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT: Could not transfer artifact org.springframework:spring-webmvc:pom:3.0.0.BUILD-SNAPSHOT from/to JBoss repository (http://repository.jboss.com/maven2): Access denied to: http://repository.jboss.com/maven2/org/springframework/spring-webmvc/3.0.0.BUILD-SNAPSHOT/spring-webmvc-3.0.0.BUILD-SNAPSHOT.pom It appears the sample is broken - maybe I was pulling from the wrong repository - would be great if someone were to point me at a good target to use here. With a 50% hit on samples in this repository, I started searching through numerous blogs, most of which have either outdated information (using XML-heavy Spring 2.5), some piece of configuration (which is a typical "feature" of Spring) is missing, or too much complexity in the sample. I finally found this blog that worked like a charm. This blog creates a trivial Spring MVC 3 application using Hibernate and MySQL. This application performs CRUD operations on a single table in a database using typical Spring technologies.  I downloaded the sample code from the blog, deployed it on GlassFish 3.1.2 and could CRUD the "person" entity. The source code for this application can be downloaded here. More details on the application statistics below. And then I built a similar CRUD application in Java EE 6 using NetBeans wizards in a couple of minutes. The source code for the application can be downloaded here and the WAR here. The Spring Source Tool Suite may also offer similar wizard-driven capabilities but this blog focus primarily on comparing the runtimes. The lack of STS tutorials was slightly disappointing as well. NetBeans however has tons of text-based and video tutorials and tons of material even by the community. One more bit on the download size of tools bundle ... NetBeans 7.1.1 "All" is 211 MB (which includes GlassFish and Tomcat) Spring Tool Suite  2.9.0 is 347 MB (~ 65% bigger) This blog is not about the tooling comparison so back to the Java EE 6 version of the application .... In order to run the Java EE version on GlassFish, copy the MySQL Connector/J to glassfish3/glassfish/domains/domain1/lib/ext directory and create a JDBC connection pool and JDBC resource as: ./bin/asadmin create-jdbc-connection-pool --datasourceclassname \\ com.mysql.jdbc.jdbc2.optional.MysqlDataSource --restype \\ javax.sql.DataSource --property \\ portNumber=3306:user=mysql:password=mysql:databaseName=mydatabase \\ myConnectionPool ./bin/asadmin create-jdbc-resource --connectionpoolid myConnectionPool jdbc/myDataSource I generated WARs for the two projects and the table below highlights some differences between them: Java EE 6 Spring WAR File Size 0.021030 MB 10.87 MB (~516x) Number of files 20 53 (> 2.5x) Bundled libraries 0 36 Total size of libraries 0 12.1 MB XML files 3 5 LoC in XML files 50 (11 + 15 + 24) 129 (27 + 46 + 16 + 11 + 19) (~ 2.5x) Total .properties files 1 Bundle.properties 2 spring.properties, log4j.properties Cold Deploy 5,339 ms 11,724 ms Second Deploy 481 ms 6,261 ms Third Deploy 528 ms 5,484 ms Fourth Deploy 484 ms 5,576 ms Runtime memory ~73 MB ~101 MB Some points worth highlighting from the table ... 516x WAR file, 10x deployment time - With 12.1 MB of libraries (for a very basic application) bundled in your application, the WAR file size and the deployment time will naturally go higher. The WAR file for Spring-based application is 516x bigger and the deployment time is double during the first deployment and ~ 10x during subsequent deployments. The Java EE 6 application is fully portable and will run on any Java EE 6 compliant application server. 36 libraries in the WAR - There are 14 Java EE 6 compliant application servers today. Each of those servers provide all the functionality like transactions, dependency injection, security, persistence, etc typically required of an enterprise or web application. There is no need to bundle 36 libraries worth 12.1 MB for a trivial CRUD application. These 14 compliant application servers provide all the functionality baked in. Now you can also deploy these libraries in the container but then you don't get the "portability" offered by Spring in that case. Does your typical Spring deployment actually do that ? 3x LoC in XML - The number of XML files is about 1.6x and the LoC is ~ 2.5x. So much XML seems circa 2003 when the Java language had no annotations. The XML files can be further reduced, e.g. faces-config.xml can be replaced without providing i18n, but I just want to compare stock applications. Memory usage - Both the applications were deployed on default GlassFish 3.1.2 installation and any additional memory consumed as part of deployment/access was attributed to the application. This is by no means scientific but at least provides an initial ballpark. This area definitely needs more investigation. Another table that compares typical Java EE 6 compliant application servers and the custom-stack created for a Spring application ... Java EE 6 Spring Web Container ? 53 MB (tcServer 2.6.3 Developer Edition) Security ? 12 MB (Spring Security 3.1.0) Persistence ? 6.3 MB (Hibernate 4.1.0, required) Dependency Injection ? 5.3 MB (Framework) Web Services ? 796 KB (Spring WS 2.0.4) Messaging ? 3.4 MB (RabbitMQ Server 2.7.1) 936 KB (Java client 936) OSGi ? 1.3 MB (Spring OSGi 1.2.1) GlassFish and WebLogic (starting at 33 MB) 83.3 MB There are differentiating factors on both the stacks. But most of the functionality like security, persistence, and dependency injection is baked in a Java EE 6 compliant application server but needs to be individually managed and patched for a Spring application. This very quickly leads to a "stack explosion". The Java EE 6 servers are tested extensively on a variety of platforms in different combinations whereas a Spring application developer is responsible for testing with different JDKs, Operating Systems, Versions, Patches, etc. Oracle has both the leading OSS lightweight server with GlassFish and the leading enterprise Java server with WebLogic Server, both Java EE 6 and both with lightweight deployment options. The Web Container offered as part of a Java EE 6 application server not only deploys your enterprise Java applications but also provide operational management, diagnostics, and mission-critical capabilities required by your applications. The Java EE 6 platform also introduced the Web Profile which is a subset of the specifications from the entire platform. It is targeted at developers of modern web applications offering a reasonably complete stack, composed of standard APIs, and is capable out-of-the-box of addressing the needs of a large class of Web applications. As your applications grow, the stack can grow to the full Java EE 6 platform. The GlassFish Server Web Profile starting at 33MB (smaller than just the non-standard tcServer) provides most of the functionality typically required by a web application. WebLogic provides battle-tested functionality for a high throughput, low latency, and enterprise grade web application. No individual managing or patching, all tested and commercially supported for you! Note that VMWare does have a server, tcServer, but it is non-standard and not even certified to the level of the standard Web Profile most customers expect these days. Customers who choose this risk proprietary lock-in since VMWare does not seem to want to formally certify with either Java EE 6 Enterprise Platform or with Java EE 6 Web Profile but of course it would be great if they were to join the community and help their customers reduce the risk of deploying on VMWare software. Some more points to help you decide choose between Java EE 6 and Spring ... Freedom to choose container - There are 14 Java EE 6 compliant application servers today, with a variety of open source and commercial offerings. A Java EE 6 application can be deployed on any of those containers. So if you deployed your application on GlassFish today and would like to scale up with your demands then you can deploy the same application to WebLogic. And because of the portability of a Java EE 6 application, you can even take it a different vendor altogether. Spring requires a runtime which could be any of these app servers as well. But why use Spring when all the required functionality is already baked into the application server itself ? Spring also has a different definition of portability where they claim to bundle all the libraries in the WAR file and move to any application server. But we saw earlier how bloated that archive could be. The equivalent features in Spring runtime offerings (mainly tcServer) are not all open source, not as mature, and often require manual assembly.  Vendor choice - The Java EE 6 platform is created using the Java Community Process where all the big players like Oracle, IBM, RedHat, and Apache are conritbuting to make the platform successful. Each application server provides the basic Java EE 6 platform compliance and has its own competitive offerings. This allows you to choose an application server for deploying your Java EE 6 applications. If you are not happy with the support or feature of one vendor then you can move your application to a different vendor because of the portability promise offered by the platform. Spring is a set of products from a single company, one price book, one support organization, one sustaining organization, one sales organization, etc. If any of those cause a customer headache, where do you go ? Java EE, backed by multiple vendors, is a safer bet for those that are risk averse. Production support - With Spring, typically you need to get support from two vendors - VMWare and the container provider. With Java EE 6, all of this is typically provided by one vendor. For example, Oracle offers commercial support from systems, operating systems, JDK, application server, and applications on top of them. VMWare certainly offers complete production support but do you really want to put all your eggs in one basket ? Do you really use tcServer ? ;-) Maintainability - With Spring, you are likely building your own distribution with multiple JAR files, integrating, patching, versioning, etc of all those components. Spring's claim is that multiple JAR files allow you to go à la carte and pick the latest versions of different components. But who is responsible for testing whether all these versions work together ? Yep, you got it, its YOU! If something does not work, who patches and maintains the JARs ? Of course, you! Commercial support for such a configuration ? On your own! The Java EE application servers manage all of this for you and provide a well-tested and commercially supported bundle. While it is always good to realize that there is something new and improved that updates and replaces older frameworks like Spring, the good news is not only does a Java EE 6 container offer what is described here, most also will let you deploy and run your Spring applications on them while you go through an upgrade to a more modern architecture. End result, you get the best of both worlds - keeping your legacy investment but moving to a more agile, lightweight world of Java EE 6. A message to the Spring lovers ... The complexity in J2EE 1.2, 1.3, and 1.4 led to the genesis of Spring but that was in 2004. This is 2012 and the name has changed to "Java EE 6" :-) There are tons of improvements in the Java EE platform to make it easy-to-use and powerful. Some examples: Adding @Stateless on a POJO makes it an EJB EJBs can be packaged in a WAR with no special packaging or deployment descriptors "web.xml" and "faces-config.xml" are optional in most of the common cases Typesafe dependency injection is now part of the Java EE platform Add @Path on a POJO allows you to publish it as a RESTful resource EJBs can be used as backing beans for Facelets-driven JSF pages providing full MVC Java EE 6 WARs are known to be kilobytes in size and deployed in milliseconds Tons of other simplifications in the platform and application servers So if you moved away from J2EE to Spring many years ago and have not looked at Java EE 6 (which has been out since Dec 2009) then you should definitely try it out. Just be at least aware of what other alternatives are available instead of restricting yourself to one stack. Here are some workshops and screencasts worth trying: screencast #37 shows how to build an end-to-end application using NetBeans screencast #36 builds the same application using Eclipse javaee-lab-feb2012.pdf is a 3-4 hours self-paced hands-on workshop that guides you to build a comprehensive Java EE 6 application using NetBeans Each city generally has a "spring cleanup" program every year. It allows you to clean up the mess from your house. For your software projects, you don't need to wait for an annual event, just get started and reduce the technical debt now! Move away from your legacy Spring-based applications to a lighter and more modern approach of building enterprise Java applications using Java EE 6. Watch this beautiful presentation that explains how to migrate from Spring -> Java EE 6: List of files in the Java EE 6 project: ./index.xhtml./META-INF./person./person/Create.xhtml./person/Edit.xhtml./person/List.xhtml./person/View.xhtml./resources./resources/css./resources/css/jsfcrud.css./template.xhtml./WEB-INF./WEB-INF/classes./WEB-INF/classes/Bundle.properties./WEB-INF/classes/META-INF./WEB-INF/classes/META-INF/persistence.xml./WEB-INF/classes/org./WEB-INF/classes/org/javaee./WEB-INF/classes/org/javaee/javaeemysql./WEB-INF/classes/org/javaee/javaeemysql/AbstractFacade.class./WEB-INF/classes/org/javaee/javaeemysql/Person.class./WEB-INF/classes/org/javaee/javaeemysql/Person_.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$1.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$PersonControllerConverter.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController.class./WEB-INF/classes/org/javaee/javaeemysql/PersonFacade.class./WEB-INF/classes/org/javaee/javaeemysql/util./WEB-INF/classes/org/javaee/javaeemysql/util/JsfUtil.class./WEB-INF/classes/org/javaee/javaeemysql/util/PaginationHelper.class./WEB-INF/faces-config.xml./WEB-INF/web.xml List of files in the Spring 3.x project: ./META-INF ./META-INF/MANIFEST.MF./WEB-INF./WEB-INF/applicationContext.xml./WEB-INF/classes./WEB-INF/classes/log4j.properties./WEB-INF/classes/org./WEB-INF/classes/org/krams ./WEB-INF/classes/org/krams/tutorial ./WEB-INF/classes/org/krams/tutorial/controller ./WEB-INF/classes/org/krams/tutorial/controller/MainController.class ./WEB-INF/classes/org/krams/tutorial/domain ./WEB-INF/classes/org/krams/tutorial/domain/Person.class ./WEB-INF/classes/org/krams/tutorial/service ./WEB-INF/classes/org/krams/tutorial/service/PersonService.class ./WEB-INF/hibernate-context.xml ./WEB-INF/hibernate.cfg.xml ./WEB-INF/jsp ./WEB-INF/jsp/addedpage.jsp ./WEB-INF/jsp/addpage.jsp ./WEB-INF/jsp/deletedpage.jsp ./WEB-INF/jsp/editedpage.jsp ./WEB-INF/jsp/editpage.jsp ./WEB-INF/jsp/personspage.jsp ./WEB-INF/lib ./WEB-INF/lib/antlr-2.7.6.jar ./WEB-INF/lib/aopalliance-1.0.jar ./WEB-INF/lib/c3p0-0.9.1.2.jar ./WEB-INF/lib/cglib-nodep-2.2.jar ./WEB-INF/lib/commons-beanutils-1.8.3.jar ./WEB-INF/lib/commons-collections-3.2.1.jar ./WEB-INF/lib/commons-digester-2.1.jar ./WEB-INF/lib/commons-logging-1.1.1.jar ./WEB-INF/lib/dom4j-1.6.1.jar ./WEB-INF/lib/ejb3-persistence-1.0.2.GA.jar ./WEB-INF/lib/hibernate-annotations-3.4.0.GA.jar ./WEB-INF/lib/hibernate-commons-annotations-3.1.0.GA.jar ./WEB-INF/lib/hibernate-core-3.3.2.GA.jar ./WEB-INF/lib/javassist-3.7.ga.jar ./WEB-INF/lib/jstl-1.1.2.jar ./WEB-INF/lib/jta-1.1.jar ./WEB-INF/lib/junit-4.8.1.jar ./WEB-INF/lib/log4j-1.2.14.jar ./WEB-INF/lib/mysql-connector-java-5.1.14.jar ./WEB-INF/lib/persistence-api-1.0.jar ./WEB-INF/lib/slf4j-api-1.6.1.jar ./WEB-INF/lib/slf4j-log4j12-1.6.1.jar ./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-jdbc-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-orm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-tx-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar ./WEB-INF/lib/standard-1.1.2.jar ./WEB-INF/lib/xml-apis-1.0.b2.jar ./WEB-INF/spring-servlet.xml ./WEB-INF/spring.properties ./WEB-INF/web.xml So, are you excited about Java EE 6 ? Want to get started now ? Here are some resources: Java EE 6 SDK (including runtime, samples, tutorials etc) GlassFish Server Open Source Edition 3.1.2 (Community) Oracle GlassFish Server 3.1.2 (Commercial) Java EE 6 using WebLogic 12c and NetBeans (Video) Java EE 6 with NetBeans and GlassFish (Video) Java EE with Eclipse and GlassFish (Video)

  Read the article

• ActiveX component can't create Object Error? Check 64 bit Status

  - by Rick Strahl

  If you're running on IIS 7 and a 64 bit operating system you might run into the following error using ASP classic or ASP.NET with COM interop. In classic ASP applications the error will show up as: ActiveX component can't create object   (Error 429) (actually without error handling the error just shows up as 500 error page) In my case the code that's been giving me problems has been a FoxPro COM object I'd been using to serve banner ads to some of my pages. The code basically looks up banners from a database table and displays them at random. The ASP classic code that uses it looks like this: <% Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> Originally this code had no specific error checking as above so the ASP pages just failed with 500 error pages from the Web server. To find out what the problem is this code is more useful at least for debugging: <% ON ERROR RESUME NEXT Set banner = Server.CreateObject("wwBanner.aspBanner") Response.Write(err.Number & " - " & err.Description) banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> which results in: 429 - ActiveX component can't create object which at least gives you a slight clue. In ASP.NET invoking the same COM object with code like this: <% dynamic banner = wwUtils.CreateComInstance("wwBanner.aspBanner") as dynamic; banner.cBANNERFILE = "wwsitebanners"; Response.Write(banner.getBanner(-1)); %> results in: Retrieving the COM class factory for component with CLSID {B5DCBB81-D5F5-11D2-B85E-00600889F23B} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). The class is in fact registered though and the COM server loads fine from a command prompt or other COM client. This error can be caused by a COM server that doesn't load. It looks like a COM registration error. There are a number of traditional reasons why this error can crop up of course. The server isn't registered (run regserver32 to register a DLL server or /regserver on an EXE server) Access permissions aren't set on the COM server (Web account has to be able to read the DLL ie. Network service) The COM server fails to load during initialization ie. failing during startup One thing I always do to check for COM errors fire up the server in a COM client outside of IIS and ensure that it works there first - it's almost always easier to debug a server outside of the Web environment. In my case I tried the server in Visual FoxPro on the server with: loBanners = CREATEOBJECT("wwBanner.aspBanner") loBanners.cBannerFile = "wwsitebanners" ? loBanners.GetBanner(-1) and it worked just fine. If you don't have a full dev environment on the server you can also use VBScript do the same thing and run the .vbs file from the command prompt: Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" MsgBox(banner.getBanner(-1)) Since this both works it tells me the server is registered and working properly. This leaves startup failures or permissions as the problem. I double checked permissions for the Application Pool and the permissions of the folder where the DLL lives and both are properly set to allow access by the Application Pool impersonated user. Just to be sure I assigned an Admin user to the Application Pool but still no go. So now what? 64 bit Servers Ahoy A couple of weeks back I had set up a few of my Application pools to 64 bit mode. My server is Server 2008 64 bit and by default Application Pools run 64 bit. Originally when I installed the server I set up most of my Application Pools to 32 bit mainly for backwards compatibility. But as more of my code migrates to 64 bit OS's I figured it'd be a good idea to see how well code runs under 64 bit code. The transition has been mostly painless. Until today when I noticed the problem with the code above when scrolling to my IIS logs and noticing a lot of 500 errors on many of my ASP classic pages. The code in question in most of these pages deals with this single simple COM object. It took a while to figure out that the problem is caused by the Application Pool running in 64 bit mode. The issue is that 32 bit COM objects (ie. my old Visual FoxPro COM component) cannot be loaded in a 64 bit Application Pool. The ASP pages using this COM component broke on the day I switched my main Application Pool into 64 bit mode but I didn't find the problem until I searched my logs for errors by pure chance. To fix this is easy enough once you know what the problem is by switching the Application Pool to Enable 32-bit Applications: Once this is done the COM objects started working correctly again. 64 bit ASP and ASP.NET with DCOM Servers This is kind of off topic, but incidentally it's possible to load 32 bit DCOM (out of process) servers from ASP.NET and ASP classic even if those applications run in 64 bit application pools. In fact, in West Wind Web Connection I use this capability to run a 64 bit ASP.NET handler that talks to a 32 bit FoxPro COM server which allows West Wind Web Connection to run in native 64 bit mode without custom configuration (which is actually quite useful). It's probably not a common usage scenario but it's good to know that you can actually access 32 bit COM objects this way from ASP.NET. For West Wind Web Connection this works out well as the DCOM interface only makes one non-chatty call to the backend server that handles all the rest of the request processing. Application Pool Isolation is your Friend For me the recent incident of failure in the classic ASP pages has just been another reminder to be very careful with moving applications to 64 bit operation. There are many little traps when switching to 64 bit that are very difficult to track and test for. I described one issue I had a couple of months ago where one of the default ASP.NET filters was loading the wrong version (32bit instead of 64bit) which was extremely difficult to track down and was caused by a very sneaky configuration switch error (basically 3 different entries for the same ISAPI filter all with different bitness settings). It took me almost a full day to track this down). Recently I've been taken to isolate individual applications into separate Application Pools rather than my past practice of combining many apps into shared AppPools. This is a good practice assuming you have enough memory to make this work. Application Pool isolate provides more modularity and allows me to selectively move applications to 64 bit. The error above came about precisely because I moved one of my most populous app pools to 64 bit and forgot about the minimal COM object use in some of my old pages. It's easy to forget. To 64bit or Not Is it worth it to move to 64 bit? Currently I'd say -not really. In my - admittedly limited - testing I don't see any significant performance increases. In fact 64 bit apps just seem to consume considerably more memory (30-50% more in my pools on average) and performance is minimally improved (less than 5% at the very best) in the load testing I've performed on a couple of sites in both modes. The only real incentive for 64 bit would be applications that require huge data spaces that exceed the 32 bit 4 gigabyte memory limit. However I have a hard time imagining an application that needs 4 gigs of memory in a single Application Pool :-). Curious to hear other opinions on benefits of 64 bit operation. © Rick Strahl, West Wind Technologies, 2005-2011Posted in COM   ASP.NET  FoxPro  

  Read the article

• Parallelism in .NET – Part 10, Cancellation in PLINQ and the Parallel class

  - by Reed

  Many routines are parallelized because they are long running processes.  When writing an algorithm that will run for a long period of time, its typically a good practice to allow that routine to be cancelled.  I previously discussed terminating a parallel loop from within, but have not demonstrated how a routine can be cancelled from the caller’s perspective.  Cancellation in PLINQ and the Task Parallel Library is handled through a new, unified cooperative cancellation model introduced with .NET 4.0. Cancellation in .NET 4 is based around a new, lightweight struct called CancellationToken.  A CancellationToken is a small, thread-safe value type which is generated via a CancellationTokenSource.  There are many goals which led to this design.  For our purposes, we will focus on a couple of specific design decisions: Cancellation is cooperative.  A calling method can request a cancellation, but it’s up to the processing routine to terminate – it is not forced. Cancellation is consistent.  A single method call requests a cancellation on every copied CancellationToken in the routine. Let’s begin by looking at how we can cancel a PLINQ query.  Supposed we wanted to provide the option to cancel our query from Part 6: double min = collection .AsParallel() .Min(item => item.PerformComputation()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We would rewrite this to allow for cancellation by adding a call to ParallelEnumerable.WithCancellation as follows: var cts = new CancellationTokenSource(); // Pass cts here to a routine that could, // in parallel, request a cancellation try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation()); } catch (OperationCanceledException e) { // Query was cancelled before it finished } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, if the user calls cts.Cancel() before the PLINQ query completes, the query will stop processing, and an OperationCanceledException will be raised.  Be aware, however, that cancellation will not be instantaneous.  When cts.Cancel() is called, the query will only stop after the current item.PerformComputation() elements all finish processing.  cts.Cancel() will prevent PLINQ from scheduling a new task for a new element, but will not stop items which are currently being processed.  This goes back to the first goal I mentioned – Cancellation is cooperative.  Here, we’re requesting the cancellation, but it’s up to PLINQ to terminate. If we wanted to allow cancellation to occur within our routine, we would need to change our routine to accept a CancellationToken, and modify it to handle this specific case: public void PerformComputation(CancellationToken token) { for (int i=0; i<this.iterations; ++i) { // Add a check to see if we've been canceled // If a cancel was requested, we'll throw here token.ThrowIfCancellationRequested(); // Do our processing now this.RunIteration(i); } } With this overload of PerformComputation, each internal iteration checks to see if a cancellation request was made, and will throw an OperationCanceledException at that point, instead of waiting until the method returns.  This is good, since it allows us, as developers, to plan for cancellation, and terminate our routine in a clean, safe state. This is handled by changing our PLINQ query to: try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation(cts.Token)); } catch (OperationCanceledException e) { // Query was cancelled before it finished } PLINQ is very good about handling this exception, as well.  There is a very good chance that multiple items will raise this exception, since the entire purpose of PLINQ is to have multiple items be processed concurrently.  PLINQ will take all of the OperationCanceledException instances raised within these methods, and merge them into a single OperationCanceledException in the call stack.  This is done internally because we added the call to ParallelEnumerable.WithCancellation. If, however, a different exception is raised by any of the elements, the OperationCanceledException as well as the other Exception will be merged into a single AggregateException. The Task Parallel Library uses the same cancellation model, as well.  Here, we supply our CancellationToken as part of the configuration.  The ParallelOptions class contains a property for the CancellationToken.  This allows us to cancel a Parallel.For or Parallel.ForEach routine in a very similar manner to our PLINQ query.  As an example, we could rewrite our Parallel.ForEach loop from Part 2 to support cancellation by changing it to: try { var cts = new CancellationTokenSource(); var options = new ParallelOptions() { CancellationToken = cts.Token }; Parallel.ForEach(customers, options, customer => { // Run some process that takes some time... DateTime lastContact = theStore.GetLastContact(customer); TimeSpan timeSinceContact = DateTime.Now - lastContact; // Check for cancellation here options.CancellationToken.ThrowIfCancellationRequested(); // If it's been more than two weeks, send an email, and update... if (timeSinceContact.Days > 14) { theStore.EmailCustomer(customer); customer.LastEmailContact = DateTime.Now; } }); } catch (OperationCanceledException e) { // The loop was cancelled } Notice that here we use the same approach taken in PLINQ.  The Task Parallel Library will automatically handle our cancellation in the same manner as PLINQ, providing a clean, unified model for cancellation of any parallel routine.  The TPL performs the same aggregation of the cancellation exceptions as PLINQ, as well, which is why a single exception handler for OperationCanceledException will cleanly handle this scenario.  This works because we’re using the same CancellationToken provided in the ParallelOptions.  If a different exception was thrown by one thread, or a CancellationToken from a different CancellationTokenSource was used to raise our exception, we would instead receive all of our individual exceptions merged into one AggregateException.

  Read the article

• CodePlex Daily Summary for Friday, February 19, 2010

  CodePlex Daily Summary for Friday, February 19, 2010New ProjectsApplication Management Library: Application Management makes your application life easier. It will automatic do memory management, handle and log unhandled exceptions, profiling y...Audio Service - Play Wave Files From Windows Service: This is a windows service that Check a registry key, when the key is updated with a new wave file path the service plays the wave file.Aviamodels: 3d drawing AviamodelsControl of payment proofs program for Greek citizens: This is a program that is used for Greek citizens who want to keep track of their payment proofs.Cover Creator: Cover Creator gives you the possibility to create and print CD covers. Content of CD is taken from http://www.freedb.org/ or can be added/modyfied ...DevBoard: DevBoard is a webbased scrum tool that helps developers/team get a clear overview of the project progress. It's developed in C# and silverlight.Flex AdventureWorks: The is mostly a skunk-works application to help me get acclimated to CodePlex. The long term goal is to integrate a Flex UI with the AdventureWor...GRE Wordlist: An intuitive and customizable word list for GRE aspirants. Developed in Java using a word list similar to Barron's.Indexer: A desktop file Index and Search tool which allows you to choose a list of folders to index, and then search on later. It is based on Lucene.net an...Project Management Office (PMO) for SharePoint: Sample web part for the Code Mastery event in Boston, February 11, 2010.Restart SQL Audit Policy and Job: Resolve SQL 2008 Audit Network Connectivity Issue.Rounded Corners / DIV Container: The RoundedDiv round corners container is a skin-able, CSS compliant UI control. Select which corners should be rounded, collapse and expand the c...Silverlight Google Search Application: The Silverlight Google Search Application uses Google Search API and behaves like Internet Search Application with option to preview desired page i...Weather Forecast Control: MyWeather forecast control pulls up to date weather forecast information from The Weather Channel for your website.New ReleasesApplication Management Library: ApplicationManagement v1.0: First ReleaseAudio Service - Play Wave Files From Windows Service: Audio Service v1.0: This is a working version of the Audio Service. Please use as you need to.AutoMapper: 1.0.1 for Silverlight 3.0 Alpha: AutoMapper for Silverlight 3.0. Features not supported: IDataReader mapping IListSource mapping All other features are supported.Buzz Dot Net: Buzz Dot Net v.1.10219: Buzz Dot Net Library (Parser & Objects) + WPF Example (using MVVM & Threading)Canvas VSDOC Intellisense: V 1.0.0.0a: This release contains two JavaScript files: canvas-utils.js (can be referenced in both runtime and development environment) canvas-vsdoc.js (must ...Control of payment proofs program for Greek citizens: Payment Proofs: source codeCourier: Beta 2: Added Rx Framework support and re-factored how message registration and un-registration works Blog post explaining the updates and re-factoring c...Cover Creator: Initial release: This is initial stable release. For now only in Polish language.Employee Scheduler: Employee Scheduler 2.2: Small Bug found. Small total hour calculation bug. See http://employeescheduler.codeplex.com/WorkItem/View.aspx?WorkItemId=6059 Extract the files...EnhSim: Release v1.9.7.1: Release v1.9.7.1Implemented Dislodged Foreign Object trinket Whispering Fanged Skull now also procs off Flame shock dots You can toggle bloodlust o...Extend SmallBasic: Teaching Extensions v.007: added SimpleSquareTest added Tortoise.Approve() for virtual proctor how to use virtual proctor: change the path in the proctor.txt file (located i...FolderSize: FolderSize.Win32.1.0.1.0: FolderSize.Win32.1.0.1.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GLB Virtual Player Builder: v0.4.0 Beta: Allows for user to import and use archetypes for building players. The archetypes are contained in the file "archetypes.xml". This file is editab...Google Map WebPart from SharePoint List: GMap Stable Release: GMap Stable ReleaseHenge3D Physics Library for XNA: Henge3D Source (2010-02 R2): Fixed a build error related to an assembly attribute in XBOX 360 builds. Tweaked the controls in the sample when targeting the 360. Reduced the...Indexer: Beta Release 1: Just the initial/rough cut.NukeCS: NukeCS 5.2.3 Source Code: update version to 5.2.3ODOS: ODOS STABLE 1.5.0: Thank you for your patience while we develop this version. Not that much has been added, though. Just doing some sub-conscious stuff to make life...PoshBoard: PoshBoard 3.0 Beta 1: Welcome to the first beta release of PoshBoard 3.0 ! IMPORTANT WARNING : this release is absolutly not feature complete and is error-prone. Okay, ...Restart SQL Audit Policy and Job: Restart SQL 2008 Audit Policy and Job: This folder contains three pieces of source code: Server Audit Status (Started).xml - Import this on-schedule policy into your server's Policy-Ba...SAL- Self Artificial Learning: Artificial Learning 2AQV Working Proof Of Concept: This is the Simulation proof of concept version that comes after the 1aq version. AQ stands for Anwering Questions.SharePoint 2010 Word Automation: SP 2010 Word Automation - Workflow Actions 1.1: This release includes two new custom workflow activities for SharePoint designer Convert Folder Convert Library More information about these new...SharePoint Outlook Connector: Version 1.0.1.1: Exception Logging has been improved.Sharpy: Sharpy 1.2 Alpha: This is the third Sharpy release. A change has been made to allow overriding the master page from the controller. The release contains the single ...Silverlight Google Search Application: SL Google Search App Alpha: This is just a first alpha version of the application, as it looks like when I uploaded it to CodePlex. The application works, requires Silverlight...Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0 RC: EF Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowser VS 2010 RC MVC 2 RC db MSSQL2008thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.6): This release is an update for WSCF.blue V1. Below are the bug fixes made since the V1.0.5 release: The data contract type filter was not including...TS3QueryLib.Net: TS3QueryLib.Net Version 0.18.13.0: Changelog Added overloads to all methods of QueryRunenr class handling permission tasks to allow passing of permission name instead of permissionid...Umbraco CMS: Umbraco 4.1 Beta 2: This is the second beta of Umbraco 4.1. Umbraco 4.1 is more advanced than ever, yet faster, lighter and simpler to use than ever. We, on behalf of...VCC: Latest build, v2.1.30218.0: Automatic drop of latest buildZack's Fiasco - Code Generated DAL: v1.2.4: Enhancements: SQL Server CRUD Stored Procedures added option for USE <db> added option to create or not create INSERT sprocs added option to cr...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsRawrSharpyDinnerNow.netBlogEngine.NETjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelFacebook Developer ToolkitFluent Ribbon Control Suite

  Read the article

• Creating a dynamic proxy generator with c# – Part 2 – Interceptor Design

  - by SeanMcAlinden

  Creating a dynamic proxy generator – Part 1 – Creating the Assembly builder, Module builder and caching mechanism For the latest code go to http://rapidioc.codeplex.com/ Before getting too involved in generating the proxy, I thought it would be worth while going through the intended design, this is important as the next step is to start creating the constructors for the proxy. Each proxy derives from a specified type The proxy has a corresponding constructor for each of the base type constructors The proxy has overrides for all methods and properties marked as Virtual on the base type For each overridden method, there is also a private method whose sole job is to call the base method. For each overridden method, a delegate is created whose sole job is to call the private method that calls the base method. The following class diagram shows the main classes and interfaces involved in the interception process. I’ll go through each of them to explain their place in the overall proxy.   IProxy Interface The proxy implements the IProxy interface for the sole purpose of adding custom interceptors. This allows the created proxy interface to be cast as an IProxy and then simply add Interceptors by calling it’s AddInterceptor method. This is done internally within the proxy building process so the consumer of the API doesn’t need knowledge of this. IInterceptor Interface The IInterceptor interface has one method: Handle. The handle method accepts a IMethodInvocation parameter which contains methods and data for handling method interception. Multiple classes that implement this interface can be added to the proxy. Each method override in the proxy calls the handle method rather than simply calling the base method. How the proxy fully works will be explained in the next section MethodInvocation. IMethodInvocation Interface & MethodInvocation class The MethodInvocation will contain one main method and multiple helper properties. Continue Method The method Continue() has two functions hidden away from the consumer. When Continue is called, if there are multiple Interceptors, the next Interceptors Handle method is called. If all Interceptors Handle methods have been called, the Continue method then calls the base class method. Properties The MethodInvocation will contain multiple helper properties including at least the following: Method Name (Read Only) Method Arguments (Read and Write) Method Argument Types (Read Only) Method Result (Read and Write) – this property remains null if the method return type is void Target Object (Read Only) Return Type (Read Only) DefaultInterceptor class The DefaultInterceptor class is a simple class that implements the IInterceptor interface. Here is the code: DefaultInterceptor namespace Rapid.DynamicProxy.Interception {     /// <summary>     /// Default interceptor for the proxy.     /// </summary>     /// <typeparam name="TBase">The base type.</typeparam>     public class DefaultInterceptor<TBase> : IInterceptor<TBase> where TBase : class     {         /// <summary>         /// Handles the specified method invocation.         /// </summary>         /// <param name="methodInvocation">The method invocation.</param>         public void Handle(IMethodInvocation<TBase> methodInvocation)         {             methodInvocation.Continue();         }     } } This is automatically created in the proxy and is the first interceptor that each method override calls. It’s sole function is to ensure that if no interceptors have been added, the base method is still called. Custom Interceptor Example A consumer of the Rapid.DynamicProxy API could create an interceptor for logging when the FirstName property of the User class is set. Just for illustration, I have also wrapped a transaction around the methodInvocation.Coninue() method. This means that any overriden methods within the user class will run within a transaction scope. MyInterceptor public class MyInterceptor : IInterceptor<User<int, IRepository>> {     public void Handle(IMethodInvocation<User<int, IRepository>> methodInvocation)     {         if (methodInvocation.Name == "set_FirstName")         {             Logger.Log("First name seting to: " + methodInvocation.Arguments[0]);         }         using (TransactionScope scope = new TransactionScope())         {             methodInvocation.Continue();         }         if (methodInvocation.Name == "set_FirstName")         {             Logger.Log("First name has been set to: " + methodInvocation.Arguments[0]);         }     } } Overridden Method Example To show a taster of what the overridden methods on the proxy would look like, the setter method for the property FirstName used in the above example would look something similar to the following (this is not real code but will look similar): set_FirstName public override void set_FirstName(string value) {     set_FirstNameBaseMethodDelegate callBase =         new set_FirstNameBaseMethodDelegate(this.set_FirstNameProxyGetBaseMethod);     object[] arguments = new object[] { value };     IMethodInvocation<User<IRepository>> methodInvocation =         new MethodInvocation<User<IRepository>>(this, callBase, "set_FirstName", arguments, interceptors);          this.Interceptors[0].Handle(methodInvocation); } As you can see, a delegate instance is created which calls to a private method on the class, the private method calls the base method and would look like the following: calls base setter private void set_FirstNameProxyGetBaseMethod(string value) {     base.set_FirstName(value); } The delegate is invoked when methodInvocation.Continue() is called within an interceptor. The set_FirstName parameters are loaded into an object array. The current instance, delegate, method name and method arguments are passed into the methodInvocation constructor (there will be more data not illustrated here passed in when created including method info, return types, argument types etc.) The DefaultInterceptor’s Handle method is called with the methodInvocation instance as it’s parameter. Obviously methods can have return values, ref and out parameters etc. in these cases the generated method override body will be slightly different from above. I’ll go into more detail on these aspects as we build them. Conclusion I hope this has been useful, I can’t guarantee that the proxy will look exactly like the above, but at the moment, this is pretty much what I intend to do. Always worth downloading the code at http://rapidioc.codeplex.com/ to see the latest. There will also be some tests that you can debug through to help see what’s going on. Cheers, Sean.

  Read the article

• WinInet Apps failing when Internet Explorer is set to Offline Mode

  - by Rick Strahl

  Ran into a nasty issue last week when all of a sudden many of my old applications that are using WinInet for HTTP access started failing. Specifically, the WinInet HttpSendRequest() call started failing with an error of 2, which when retrieving the error boils down to: WinInet Error 2: The system cannot find the file specified Now this error can pop up in many legitimate scenarios with WinInet such as when no Internet connection is available or the HTTP configuration (usually configured in Internet Explorer’s options) is misconfigured. The error typically means that the server in question cannot be found or more specifically an Internet connection can’t be established. In this case the problem started suddenly and was causing some of my own applications (old Visual FoxPro apps using my own wwHttp library) and all Adobe Air applications (which apparently uses WinInet for its basic HTTP stack) along with a few more oddball applications to fail instantly when trying to connect via HTTP. Most other applications – all of my installed browsers, email clients, various social network updaters all worked just fine. It seems it was only WinInet apps that were failing. Yet oddly Internet Explorer appeared to be working. So the problem seemed to be isolated to those ‘classic’ applications using WinInet. WinInet’s base configuration uses the Internet Explorer options dialog. To check this out I typically go to the Internet Explorer options and find the Connection tab, and check out the LAN Setup. Make sure there are no rogue proxy settings or configuration scripts that are invalid. Trying with Auto-configuration on and off also can often fix ‘real’ configuration errors. This time however this wasn’t a problem – nothing in the LAN configuration was set (all default). I also played with the Automatic detection of settings which also had no effect. I also tried to use Fiddler to see if that would tell me something. Fiddler has a few additional WinInet configuration options in its configuration. Running Fiddler and hitting an HTTP request using WinInet would never actually hit Fiddler – the failure would occur before WinInet ever fired up the HTTP connection to go through the Fiddler HTTP proxy. And the Culprit is: Internet Explorer’s Work Offline Option The culprit in this situation was Internet Explorer which at some point, unknown to me switched into Offline Mode and was then shut down: When this Offline mode is checked when IE is running *or* if IE gets shut down with this flag set, all applications using WinInet by default assume that it’s running in offline mode. Depending on your caching HTTP headers and whether the page was cached previously you may or may not get a response or an error. For an independent non-browser application this will be highly unpredictable and likely result in failures getting online – especially if the application forces requests to always reload by disabling HTTP caching (as I do on most of my dynamic HTTP clients). What makes this especially tricky is that even when IE is in offline mode in the browser, you can still browse around the Web *if* you have a connection. IE will try to load anything it has cached from the local cache, but as soon as you hit a URL that isn’t cached it will automatically try to access that URL and uncheck the Work Offline option. Conversely if you get knocked off the Internet and browse in IE 9, IE will automatically go into offline mode. I never explicitly set offline mode – it just automatically sets itself on and off depending on the connection. Problem is if you’re not using IE all the time (as I do – rarely and just for testing so usually a few commonly used URLs) and you left it in offline mode when you exit, offline mode stays set which results in the above head scratcher. Ack. This isn’t new behavior in IE 9 BTW – this behavior has always been there, but I think what’s different is that IE now automatically switches between online and offline modes without notifying you at all, so it’s hard to tell when you are offline. Fixing the Issue in your Code If you have an application that is using WinInet, there’s a WinInet option called INTERNET_OPTION_IGNORE_OFFLINE. I just checked this out in my own applications and Internet Explorer 9 and it works, but apparently it’s been broken for some older releases (I can’t confirm how far back though) – lots of posts seem to suggest the flag doesn’t work. However, in IE 9 at least it does seem to work if you call InternetSetOption before you call HttpOpenRequest with the Http Session handle. In FoxPro code I use: DECLARE INTEGER InternetSetOption ;    IN WININET.DLL ;    INTEGER HINTERNET,;    INTEGER dwFlags,;    INTEGER @dwValue,;    INTEGER cbSize lnOptionValue = 1   && BOOL TRUE pass by reference   *** Set needed SSL flags lnResult=InternetSetOption(this.hHttpSession,;    INTERNET_OPTION_IGNORE_OFFLINE ,;  && 77    @lnOptionValue ,4)   DECLARE INTEGER HttpOpenRequest ;    IN WININET.DLL ;    INTEGER hHTTPHandle,;    STRING lpzReqMethod,;    STRING lpzPage,;    STRING lpzVersion,;    STRING lpzReferer,;    STRING lpzAcceptTypes,;    INTEGER dwFlags,;    INTEGER dwContextw     hHTTPResult=HttpOpenRequest(THIS.hHttpsession,;    lcVerb,;    tcPage,;    NULL,NULL,NULL,;    INTERNET_FLAG_RELOAD + ;    IIF(THIS.lsecurelink,INTERNET_FLAG_SECURE,0) + ;    this.nHTTPServiceFlags,0) …  And this fixes the issue at least for IE 9… In my FoxPro wwHttp class I now call this by default to never get bitten by this again… This solves the problem permanently for my HTTP client. I never want to see offline operation in an HTTP client API – it’s just too unpredictable in handling errors and the last thing you want is getting unpredictably stale data. Problem solved but this behavior is – well ugly. But then that’s to be expected from an API that’s based on Internet Explorer, eh?© Rick Strahl, West Wind Technologies, 2005-2011Posted in HTTP  Windows  

  Read the article

• Securing an ASP.NET MVC 2 Application

  - by rajbk

  This post attempts to look at some of the methods that can be used to secure an ASP.NET MVC 2 Application called Northwind Traders Human Resources.  The sample code for the project is attached at the bottom of this post. We are going to use a slightly modified Northwind database. The screen capture from SQL server management studio shows the change. I added a new column called Salary, inserted some random salaries for the employees and then turned off AllowNulls.   The reporting relationship for Northwind Employees is shown below.   The requirements for our application are as follows: Employees can see their LastName, FirstName, Title, Address and Salary Employees are allowed to edit only their Address information Employees can see the LastName, FirstName, Title, Address and Salary of their immediate reports Employees cannot see records of non immediate reports.  Employees are allowed to edit only the Salary and Title information of their immediate reports. Employees are not allowed to edit the Address of an immediate report Employees should be authenticated into the system. Employees by default get the “Employee” role. If a user has direct reports, they will also get assigned a “Manager” role. We use a very basic empId/pwd scheme of EmployeeID (1-9) and password test$1. You should never do this in an actual application. The application should protect from Cross Site Request Forgery (CSRF). For example, Michael could trick Steven, who is already logged on to the HR website, to load a page which contains a malicious request. where without Steven’s knowledge, a form on the site posts information back to the Northwind HR website using Steven’s credentials. Michael could use this technique to give himself a raise :-) UI Notes The layout of our app looks like so: When Nancy (EmpID 1) signs on, she sees the default page with her details and is allowed to edit her address. If Nancy attempts to view the record of employee Andrew who has an employeeID of 2 (Employees/Edit/2), she will get a “Not Authorized” error page. When Andrew (EmpID 2) signs on, he can edit the address field of his record and change the title and salary of employees that directly report to him. Implementation Notes All controllers inherit from a BaseController. The BaseController currently only has error handling code. When a user signs on, we check to see if they are in a Manager role. We then create a FormsAuthenticationTicket, encrypt it (including the roles that the employee belongs to) and add it to a cookie. private void SetAuthenticationCookie(int employeeID, List<string> roles) { HttpCookiesSection cookieSection = (HttpCookiesSection) ConfigurationManager.GetSection("system.web/httpCookies"); AuthenticationSection authenticationSection = (AuthenticationSection) ConfigurationManager.GetSection("system.web/authentication"); FormsAuthenticationTicket authTicket = new FormsAuthenticationTicket( 1, employeeID.ToString(), DateTime.Now, DateTime.Now.AddMinutes(authenticationSection.Forms.Timeout.TotalMinutes), false, string.Join("|", roles.ToArray())); String encryptedTicket = FormsAuthentication.Encrypt(authTicket); HttpCookie authCookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket); if (cookieSection.RequireSSL || authenticationSection.Forms.RequireSSL) { authCookie.Secure = true; } HttpContext.Current.Response.Cookies.Add(authCookie); } We read this cookie back in Global.asax and set the Context.User to be a new GenericPrincipal with the roles we assigned earlier. protected void Application_AuthenticateRequest(Object sender, EventArgs e){ if (Context.User != null) { string cookieName = FormsAuthentication.FormsCookieName; HttpCookie authCookie = Context.Request.Cookies[cookieName]; if (authCookie == null) return; FormsAuthenticationTicket authTicket = FormsAuthentication.Decrypt(authCookie.Value); string[] roles = authTicket.UserData.Split(new char[] { '|' }); FormsIdentity fi = (FormsIdentity)(Context.User.Identity); Context.User = new System.Security.Principal.GenericPrincipal(fi, roles); }} We ensure that a user has permissions to view a record by creating a custom attribute AuthorizeToViewID that inherits from ActionFilterAttribute. public class AuthorizeToViewIDAttribute : ActionFilterAttribute{ IEmployeeRepository employeeRepository = new EmployeeRepository(); public override void OnActionExecuting(ActionExecutingContext filterContext) { if (filterContext.ActionParameters.ContainsKey("id") && filterContext.ActionParameters["id"] != null) { if (employeeRepository.IsAuthorizedToView((int)filterContext.ActionParameters["id"])) { return; } } throw new UnauthorizedAccessException("The record does not exist or you do not have permission to access it"); }} We add the AuthorizeToView attribute to any Action method that requires authorization. [HttpPost][Authorize(Order = 1)]//To prevent CSRF[ValidateAntiForgeryToken(Salt = Globals.EditSalt, Order = 2)]//See AuthorizeToViewIDAttribute class[AuthorizeToViewID(Order = 3)] [ActionName("Edit")]public ActionResult Update(int id){ var employeeToEdit = employeeRepository.GetEmployee(id); if (employeeToEdit != null) { //Employees can edit only their address //A manager can edit the title and salary of their subordinate string[] whiteList = (employeeToEdit.IsSubordinate) ? new string[] { "Title", "Salary" } : new string[] { "Address" }; if (TryUpdateModel(employeeToEdit, whiteList)) { employeeRepository.Save(employeeToEdit); return RedirectToAction("Details", new { id = id }); } else { ModelState.AddModelError("", "Please correct the following errors."); } } return View(employeeToEdit);} The Authorize attribute is added to ensure that only authorized users can execute that Action. We use the TryUpdateModel with a white list to ensure that (a) an employee is able to edit only their Address and (b) that a manager is able to edit only the Title and Salary of a subordinate. This works in conjunction with the AuthorizeToViewIDAttribute. The ValidateAntiForgeryToken attribute is added (with a salt) to avoid CSRF. The Order on the attributes specify the order in which the attributes are executed. The Edit View uses the AntiForgeryToken helper to render the hidden token: ......<% using (Html.BeginForm()) {%><%=Html.AntiForgeryToken(NorthwindHR.Models.Globals.EditSalt)%><%= Html.ValidationSummary(true, "Please correct the errors and try again.") %><div class="editor-label"> <%= Html.LabelFor(model => model.LastName) %></div><div class="editor-field">...... The application uses View specific models for ease of model binding. public class EmployeeViewModel{ public int EmployeeID; [Required] [DisplayName("Last Name")] public string LastName { get; set; } [Required] [DisplayName("First Name")] public string FirstName { get; set; } [Required] [DisplayName("Title")] public string Title { get; set; } [Required] [DisplayName("Address")] public string Address { get; set; } [Required] [DisplayName("Salary")] [Range(500, double.MaxValue)] public decimal Salary { get; set; } public bool IsSubordinate { get; set; }} To help with displaying readonly/editable fields, we use a helper method. //Simple extension method to display a TextboxFor or DisplayFor based on the isEditable variablepublic static MvcHtmlString TextBoxOrLabelFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, bool isEditable){ if (isEditable) { return htmlHelper.TextBoxFor(expression); } else { return htmlHelper.DisplayFor(expression); }} The helper method is used in the view like so: <%=Html.TextBoxOrLabelFor(model => model.Title, Model.IsSubordinate)%> As mentioned in this post, there is a much easier way to update properties on an object. Download Demo Project VS 2008, ASP.NET MVC 2 RTM Remember to change the connectionString to point to your Northwind DB NorthwindHR.zip Feedback and bugs are always welcome :-)

  Read the article

• TFS, G.I. Joe and Under-doing

  If I were to rank the most consistently irritating parts of my work day, using TFS would come in first by a wide margin. Even repeated network outages this week seem like a pleasant reprieve from this monolithic beast. This is not a reflexive anti-Microsoft feeling, that attitude just wouldnt work for a consultant who does .NET development. It is also not an utter dismissal of TFS as worthless; Ive seen people use it effectively on several projects. So why? Ill start with a laundry list of shortcomings. An out of the box UI for work items that is insultingly bad, a source control system that is confoundingly fragile when handling merges, folder renames and long file names, the arcane XML wizardry necessary to customize a template and a build system that adds an extra layer of oddness on top of msbuild. Im sure my legion of readers will soon point out to me how I can work around all these issues, how this is fixed in TFS 2010 or with this add-in, and how once you have everything set up, youre fine. And theyd be right, any one of these problems could be worked around. If not dirty laundry, what else? I thought about it for a while, and came to the conclusion that TFS is so irritating to me because it represents a vision of software development that I find unappealing. To expand upon this, lets start with some wisdom from those great PSAs at the end of the G.I. Joe cartoons of the 80s: Now you know, and knowing is half the battle. In software development, Id go further and say knowing is more than half the battle. Understanding the dimensions of the problem you are trying to solve, the needs of the users, the value that your software can provide are more than half the battle. Implementation of this understanding is not easy, but it is not even possible without this knowledge. Assuming we have a fixed amount of time and mental energy for any project, why does this spell trouble for TFS? If you think about what TFS is doing, its offering you a huge array of options to track the day to day implementation of your project. From tasks, to code churn, to test coverage. All valuable metrics, but only in exchange for valuable time to get it all working. In addition, when you have a shiny toy like TFS, the temptation is to feel obligated to use it. So the push from TFS is to encourage a project manager and team to focus on process and metrics around process. You can get great visibility, and graphs to show your project stakeholders, but none of that is important if you are not implementing the right product. Not just unimportant, these activities can be harmful as they drain your time and sap your creativity away from the rest of the project. To be more concrete, lets suppose your organization has invested the time to create a template for your projects and trained people in how to use it, so there is no longer a big investment of time for each project to get up and running. First, Id challenge if that template could be specific enough to be full featured and still applicable for any project. Second, the very existence of this template would be a indication to a project manager that the success of their project was somehow directly related to fitting management of that project into this format. Again, while the capabilities are wonderful, the mirage is there; just get everything into TFS and your project will run smoothly. Ill close the loop on this first topic by proposing a thought experiment. Think of the projects youve worked on. How many times have you been chagrined to discover youve implemented the wrong feature, misunderstood how a feature should work or just plain spent too much time on a screen that nobody uses? That sounds like a really worthwhile area to invest time in improving. How about going back to these projects and thinking about how many times you wished you had optimized the state change flow of your tasks or been embarrassed to not have a code churn report linked back to the latest changeset? With thanks to the Real American Heroes, Ill move on to a more current influence, that of the developers at 37signals, and their philosophy towards software development. This philosophy, fully detailed in the books Getting Real and Rework, is a vision of software that under does the competition. This is software that is deliberately limited in functionality in order to concentrate fully on making sure ever feature that is there is awesome and needed. Why is this relevant? Well, in one of those fun seeming paradoxes in life, constraints can be a spark for creativity. Think Twitter, the small screen of an iPhone, the limitations of HTML for applications, the low memory limits of older or embedded system. As long as there is some freedom within those constraints, amazing things emerge. For project management, some of the most respected people in the industry recommend using just index cards, pens and tape. They argue that with change the constant in software development, your process should be as limited (yet rigorous) as possible. Looking at TFS, this is not a system designed to under do anybody. It is a big jumble of components and options, with every feature you could think of. Predictably this means many basic functions are hard to use. For task management, many people just use an Excel spreadsheet linked up to TFS. Not a stirring endorsement of the tooling there. TFS as a whole would be far more appealing to me if there was less of it, but better. Id cut 50% of the features to make the other half really amaze and inspire me. And thats really the heart of the matter. TFS has great promise and I want to believe it can work better. But ultimately it focuses your attention on a lot of stuff that doesnt really matter and then clamps down your creativity in a mess of forms and dialogs obscuring what does.   --- Relevant Links --- All those great G.I. Joe PSAs are on YouTube, including lots of mashed up versions. A simple Google search will get you on the right track.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Class-Level Model Validation with EF Code First and ASP.NET MVC 3

  - by ScottGu

  Earlier this week the data team released the CTP5 build of the new Entity Framework Code-First library.  In my blog post a few days ago I talked about a few of the improvements introduced with the new CTP5 build.  Automatic support for enforcing DataAnnotation validation attributes on models was one of the improvements I discussed.  It provides a pretty easy way to enable property-level validation logic within your model layer. You can apply validation attributes like [Required], [Range], and [RegularExpression] – all of which are built-into .NET 4 – to your model classes in order to enforce that the model properties are valid before they are persisted to a database.  You can also create your own custom validation attributes (like this cool [CreditCard] validator) and have them be automatically enforced by EF Code First as well.  This provides a really easy way to validate property values on your models.  I showed some code samples of this in action in my previous post. Class-Level Model Validation using IValidatableObject DataAnnotation attributes provides an easy way to validate individual property values on your model classes.  Several people have asked - “Does EF Code First also support a way to implement class-level validation methods on model objects, for validation rules than need to span multiple property values?”  It does – and one easy way you can enable this is by implementing the IValidatableObject interface on your model classes. IValidatableObject.Validate() Method Below is an example of using the IValidatableObject interface (which is built-into .NET 4 within the System.ComponentModel.DataAnnotations namespace) to implement two custom validation rules on a Product model class.  The two rules ensure that: New units can’t be ordered if the Product is in a discontinued state New units can’t be ordered if there are already more than 100 units in stock We will enforce these business rules by implementing the IValidatableObject interface on our Product class, and by implementing its Validate() method like so: The IValidatableObject.Validate() method can apply validation rules that span across multiple properties, and can yield back multiple validation errors. Each ValidationResult returned can supply both an error message as well as an optional list of property names that caused the violation (which is useful when displaying error messages within UI). Automatic Validation Enforcement EF Code-First (starting with CTP5) now automatically invokes the Validate() method when a model object that implements the IValidatableObject interface is saved.  You do not need to write any code to cause this to happen – this support is now enabled by default. This new support means that the below code – which violates one of our above business rules – will automatically throw an exception (and abort the transaction) when we call the “SaveChanges()” method on our Northwind DbContext: In addition to reactively handling validation exceptions, EF Code First also allows you to proactively check for validation errors.  Starting with CTP5, you can call the “GetValidationErrors()” method on the DbContext base class to retrieve a list of validation errors within the model objects you are working with.  GetValidationErrors() will return a list of all validation errors – regardless of whether they are generated via DataAnnotation attributes or by an IValidatableObject.Validate() implementation.  Below is an example of proactively using the GetValidationErrors() method to check (and handle) errors before trying to call SaveChanges(): ASP.NET MVC 3 and IValidatableObject ASP.NET MVC 2 included support for automatically honoring and enforcing DataAnnotation attributes on model objects that are used with ASP.NET MVC’s model binding infrastructure.  ASP.NET MVC 3 goes further and also honors the IValidatableObject interface.  This combined support for model validation makes it easy to display appropriate error messages within forms when validation errors occur.  To see this in action, let’s consider a simple Create form that allows users to create a new Product: We can implement the above Create functionality using a ProductsController class that has two “Create” action methods like below: The first Create() method implements a version of the /Products/Create URL that handles HTTP-GET requests - and displays the HTML form to fill-out.  The second Create() method implements a version of the /Products/Create URL that handles HTTP-POST requests - and which takes the posted form data, ensures that is is valid, and if it is valid saves it in the database.  If there are validation issues it redisplays the form with the posted values.  The razor view template of our “Create” view (which renders the form) looks like below: One of the nice things about the above Controller + View implementation is that we did not write any validation logic within it.  The validation logic and business rules are instead implemented entirely within our model layer, and the ProductsController simply checks whether it is valid (by calling the ModelState.IsValid helper method) to determine whether to try and save the changes or redisplay the form with errors. The Html.ValidationMessageFor() helper method calls within our view simply display the error messages our Product model’s DataAnnotations and IValidatableObject.Validate() method returned.  We can see the above scenario in action by filling out invalid data within the form and attempting to submit it: Notice above how when we hit the “Create” button we got an error message.  This was because we ticked the “Discontinued” checkbox while also entering a value for the UnitsOnOrder (and so violated one of our business rules).  You might ask – how did ASP.NET MVC know to highlight and display the error message next to the UnitsOnOrder textbox?  It did this because ASP.NET MVC 3 now honors the IValidatableObject interface when performing model binding, and will retrieve the error messages from validation failures with it. The business rule within our Product model class indicated that the “UnitsOnOrder” property should be highlighted when the business rule we hit was violated: Our Html.ValidationMessageFor() helper method knew to display the business rule error message (next to the UnitsOnOrder edit box) because of the above property name hint we supplied: Keeping things DRY ASP.NET MVC and EF Code First enables you to keep your validation and business rules in one place (within your model layer), and avoid having it creep into your Controllers and Views.  Keeping the validation logic in the model layer helps ensure that you do not duplicate validation/business logic as you add more Controllers and Views to your application.  It allows you to quickly change your business rules/validation logic in one single place (within your model layer) – and have all controllers/views across your application immediately reflect it.  This help keep your application code clean and easily maintainable, and makes it much easier to evolve and update your application in the future. Summary EF Code First (starting with CTP5) now has built-in support for both DataAnnotations and the IValidatableObject interface.  This allows you to easily add validation and business rules to your models, and have EF automatically ensure that they are enforced anytime someone tries to persist changes of them to a database.  ASP.NET MVC 3 also now supports both DataAnnotations and IValidatableObject as well, which makes it even easier to use them with your EF Code First model layer – and then have the controllers/views within your web layer automatically honor and support them as well.  This makes it easy to build clean and highly maintainable applications. You don’t have to use DataAnnotations or IValidatableObject to perform your validation/business logic.  You can always roll your own custom validation architecture and/or use other more advanced validation frameworks/patterns if you want.  But for a lot of applications this built-in support will probably be sufficient – and provide a highly productive way to build solutions. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• ParallelWork: Feature rich multithreaded fluent task execution library for WPF

  - by oazabir

  ParallelWork is an open source free helper class that lets you run multiple work in parallel threads, get success, failure and progress update on the WPF UI thread, wait for work to complete, abort all work (in case of shutdown), queue work to run after certain time, chain parallel work one after another. It’s more convenient than using .NET’s BackgroundWorker because you don’t have to declare one component per work, nor do you need to declare event handlers to receive notification and carry additional data through private variables. You can safely pass objects produced from different thread to the success callback. Moreover, you can wait for work to complete before you do certain operation and you can abort all parallel work while they are in-flight. If you are building highly responsive WPF UI where you have to carry out multiple job in parallel yet want full control over those parallel jobs completion and cancellation, then the ParallelWork library is the right solution for you. I am using the ParallelWork library in my PlantUmlEditor project, which is a free open source UML editor built on WPF. You can see some realistic use of the ParallelWork library there. Moreover, the test project comes with 400 lines of Behavior Driven Development flavored tests, that confirms it really does what it says it does. The source code of the library is part of the “Utilities” project in PlantUmlEditor source code hosted at Google Code. The library comes in two flavors, one is the ParallelWork static class, which has a collection of static methods that you can call. Another is the Start class, which is a fluent wrapper over the ParallelWork class to make it more readable and aesthetically pleasing code. ParallelWork allows you to start work immediately on separate thread or you can queue a work to start after some duration. You can start an immediate work in a new thread using the following methods: void StartNow(Action doWork, Action onComplete) void StartNow(Action doWork, Action onComplete, Action<Exception> failed) For example, ParallelWork.StartNow(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }, () => { workEndedAt = DateTime.Now; }); Or you can use the fluent way Start.Work: Start.Work(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }) .OnComplete(() => { workCompletedAt = DateTime.Now; }) .Run(); Besides simple execution of work on a parallel thread, you can have the parallel thread produce some object and then pass it to the success callback by using these overloads: void StartNow<T>(Func<T> doWork, Action<T> onComplete) void StartNow<T>(Func<T> doWork, Action<T> onComplete, Action<Exception> fail) For example, ParallelWork.StartNow<Dictionary<string, string>>( () => { test = new Dictionary<string,string>(); test.Add("test", "test"); return test; }, (result) => { Assert.True(result.ContainsKey("test")); }); Or, the fluent way: Start<Dictionary<string, string>>.Work(() => { test = new Dictionary<string, string>(); test.Add("test", "test"); return test; }) .OnComplete((result) => { Assert.True(result.ContainsKey("test")); }) .Run(); You can also start a work to happen after some time using these methods: DispatcherTimer StartAfter(Action onComplete, TimeSpan duration) DispatcherTimer StartAfter(Action doWork,Action onComplete,TimeSpan duration) You can use this to perform some timed operation on the UI thread, as well as perform some operation in separate thread after some time. ParallelWork.StartAfter( () => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }, () => { workCompletedAt = DateTime.Now; }, waitDuration); Or, the fluent way: Start.Work(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }) .OnComplete(() => { workCompletedAt = DateTime.Now; }) .RunAfter(waitDuration);   There are several overloads of these functions to have a exception callback for handling exceptions or get progress update from background thread while work is in progress. For example, I use it in my PlantUmlEditor to perform background update of the application. // Check if there's a newer version of the app Start<bool>.Work(() => { return UpdateChecker.HasUpdate(Settings.Default.DownloadUrl); }) .OnComplete((hasUpdate) => { if (hasUpdate) { if (MessageBox.Show(Window.GetWindow(me), "There's a newer version available. Do you want to download and install?", "New version available", MessageBoxButton.YesNo, MessageBoxImage.Information) == MessageBoxResult.Yes) { ParallelWork.StartNow(() => { var tempPath = System.IO.Path.Combine( Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData), Settings.Default.SetupExeName); UpdateChecker.DownloadLatestUpdate(Settings.Default.DownloadUrl, tempPath); }, () => { }, (x) => { MessageBox.Show(Window.GetWindow(me), "Download failed. When you run next time, it will try downloading again.", "Download failed", MessageBoxButton.OK, MessageBoxImage.Warning); }); } } }) .OnException((x) => { MessageBox.Show(Window.GetWindow(me), x.Message, "Download failed", MessageBoxButton.OK, MessageBoxImage.Exclamation); }); The above code shows you how to get exception callbacks on the UI thread so that you can take necessary actions on the UI. Moreover, it shows how you can chain two parallel works to happen one after another. Sometimes you want to do some parallel work when user does some activity on the UI. For example, you might want to save file in an editor while user is typing every 10 second. In such case, you need to make sure you don’t start another parallel work every 10 seconds while a work is already queued. You need to make sure you start a new work only when there’s no other background work going on. Here’s how you can do it: private void ContentEditor_TextChanged(object sender, EventArgs e) { if (!ParallelWork.IsAnyWorkRunning()) { ParallelWork.StartAfter(SaveAndRefreshDiagram, TimeSpan.FromSeconds(10)); } } If you want to shutdown your application and want to make sure no parallel work is going on, then you can call the StopAll() method. ParallelWork.StopAll(); If you want to wait for parallel works to complete without a timeout, then you can call the WaitForAllWork(TimeSpan timeout). It will block the current thread until the all parallel work completes or the timeout period elapses. result = ParallelWork.WaitForAllWork(TimeSpan.FromSeconds(1)); The result is true, if all parallel work completed. If it’s false, then the timeout period elapsed and all parallel work did not complete. For details how this library is built and how it works, please read the following codeproject article: ParallelWork: Feature rich multithreaded fluent task execution library for WPF http://www.codeproject.com/KB/WPF/parallelwork.aspx If you like the article, please vote for me.

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >