Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 224/286 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• Stream music from Laptop to iPod Touch over Wi-Fi

  - by codeulike

  Rather than running a long cable from my Laptop to my stereo, I've been thinking for a while about getting one of those wireless devices that lets you transmit audio from your PC to a receiver plugged into the stereo. Then I realised I already have hardware that can potentially do this - I have an iPod Touch, and a Wi-Fi network in the house. So, is there some iPod Touch App that will let the iPod act as a Wi-Fi music receiver? And presumably, a corresponding piece of broadcast software for my (Windows Vista) Laptop?

  Read the article

• Mails bounce because of invalid character ('@') in username

  - by user1598585

  I have a working exim setup with virtual users, working alright, except for when I try to send email to certain servers. These servers reject my emails because of #5.1.3 Invalid character ('@') in username. The offending header parts seem to be: Return-path: <"[email protected]"@smtp.example.com> and ...(envelope-from <"[email protected]"@smtp.example.com>)... The problem is that I cannot find where and why the usernames are being generated like this. My router for submission is: dnslookup: driver = dnslookup domains = ! +local_domains transport = remote_smtp ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 no_more And the respective transport: remote_smtp: driver = smtp What can be producing this problem?

  Read the article

• Create 301 Redirection in Amazon Route 53 for Wildcard Subdomains

  - by Eric Yin

  My domain name hosted on Route 53 DNS. Amazon has a guide to do 301 redirection for www. To naked domain by point www. version to a S3 static website with 301 setted up. My question is, how can I have *.domain.com all have 301 redirec to naked domain name. I guess either: Some way to get all wildcard subdomains end up into one S3 bucket, how? Or: Use CloudFront on the www. version S3 site and put wildcard subdomains on the CloudFront, but how? Or: There's some hidden settings just lies on Router 53, then where? Or: use EC2, better not suggest me this, too costing for this task. Please advice.

  Read the article

• How can I find a computer on my network that is doing mass mailings?

  - by Alex Ciarlill

  I was notified by my isp that one of my machines is sending out spam. This happened about 3 months ago on windows machine running cygwin that was hacked due to an SSH vuln. The hackers setup IIS and SMTP. I cleared out the machine and all the services are disabled so I think that machine is okay I am wondering if there is any other way to identify which machine it could be coming from? The ISP has NO useful information such as source port, destination port, destination IP... nothing. I am running DD-WRT on my router, Windows 7 PC and a Windows XP PC.

  Read the article

• Internet very slow when upgrading to Ubuntu 9.10

  - by roojoo

  I was running Ubuntu 8.x on my desktop and everything worked fine. Im using wired internet and it worked perfectly, pages loaded pretty fast. However, when I decided to upgrade to 9.10 the upgrade failed at some point, however I was left with what appeared to be Ubuntu 9.10. Since then the internet has been weird. When I go to a website it takes at least 10 seconds for the page to display, however if Im on a site and navigate to other pages on the website it loads quickly. This never happened prior to the upgrade. I thought this may be due to the upgrade not installing correctly so I did a fresh install of Xubuntu 9.10 but the problems are still the same. Im writing this on a Vista machine over the wireless network and internet is fine. Does anyone have any ideas of the issue? Thanks.

  Read the article

• Ethernet switch not working

  - by Froskoy

  I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

  Read the article

• How to do simple multitasked loop processing over filenames with PowerShell?

  - by Ville Koskinen

  I'm batch transcoding some 50 GB of video files on a USB hard disk which is connected to a wlan router. The drive is mapped as a network drive on my Windows 7 laptop. The speed handicap of the wlan causes some parts of the processing to become unnecessarily slow, so I would like to do the following with PowerShell: List the names of the files on the network drive to be transcoded Copy the first file to a temporary folder on my laptop Simultaneously Transcode the file in the folder Begin copying the next file from the network drive to the temporary folder After transcoding and copy have both ended, Delete the file which has been transcoded from the temporary folder Begin transcoding next file in the temporary folder Loop until all files have been processed How would I be able to do this with PowerShell? The multitasking part is an obstacle for my skill/persistence combination.

  Read the article

• Not working WEP key in Ubuntu

  - by stupid-idiot

  This time I've got some problem with connection to the internet from my old laptop with ubuntu, I already had some problems with setting up the radio on my network card but I think it works now since it finds some wireless networks. The problem is that I can't connect to my router via wi-fi even if I'm hundred-percently sure the wepkey I punch there is correct, it works via LAN though. Also, I'm not able to ping myself with 127.0.0.1. I'm sorry to say it but I don't think I can stand this shitness for much longer. Although it's much much faster than Windows it's useless since i can't download any libraries for development. If anyone has any experience with this, even indirect, please leave your answer or comment thx

  Read the article

• Using multiple wifi connections simultaneously on Windows

  - by Salman A

  My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

  Read the article

• Using multiple wifi connections simultaneously on Windows

  - by Salman A

  My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

• netsh wlan add profile not imported passphrase

  - by sirlancelot

  I exported a wireless network connection profile from a Windows 7 machine correctly connected to a WiFi network with a WPA-TKIP passphrase. The exported xml file shows the correct settings and a keyMaterial node which I can only guess is the encrypted passphrase. When I take the xml to another Windows 7 computer and import it using netsh wlan add profile filename="WiFi.xml", it correctly adds the profile's SSID and encryption type, but a balloon pops up saying that I need to enter the passphrase. Is there a way to import the passphrase along with all other settings?

  Read the article

• Win7 Prof. Computer won't wake on lan via Magic Packet from outside network

  - by Michael

  Hi all. I just purchased a new computer running Windows 7 Professional x64. I'd like to save power by having it sleep after an hour, but I would also like to be able to Remote Desktop into it at my leisure. I set up a static IP and have port forwarding set up on the router. If the computer is awake, the RDP connection works just fine. I downloaded and installed Wake-On-Lan thanks to this article If I put my new computer to sleep and send the magic packet from my old computer inside of my home network it wakes up. If I do the same thing, however, from my work computer outside the network it does not. I figured the Firewall was blocking the incoming traffic, but nothing in the Windows Firewall logs points to this happening. I'm wondering if anyone has any suggestions or any tests I can run through in order to narrow down what the problem might be. Thanks in advance for any help you might be able to offer.

  Read the article

• Wake on Lan/Wan won't work after some time has passsed

  - by Vian Esterhuizen

  I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

  Read the article

• how to test lan network speed with ps3

  - by Damon

  I am having a heck of a time trying to get videos streaming to my PS3. I want to know if there is some way to test the speed between my PC and ps3 to see if that is the issue. For some reason when things get really slow between the ps3 and my computer (it's a wired connection through a switch), the wireless internet on completely different computer gets slow. I don't know what's causing what, but I don't know why there should be any correlation between internet speed on a wirelessly connected laptop and the LAN speed between a wired ps3 and computer.

  Read the article

• How do I send email with sendmail to external hosts?

  - by Jake

  If I wanted to send an email to a user on the same linux machine, I can run: echo -e "Subject: Foo\n\nBar\n" | sendmail -v jacob But if I run: echo -e "Subject: Foo\n\nBar\n" | sendmail -v [email protected] It will give me the error: 050 >>> MAIL From:<jacob@mu> SIZE=321 050 550 5.1.8 Cannot resolve your domain {mx-us011} If my machine has access to the internet but is behind a router and has no domain associated with it, can I use sendmail to send mail to this address? Do I need to connect through an SMTP server? Can I do that with sendmail? If I use sendmail's -f option and put my gmail account there it will work. Can (or should I) I use my IP address? echo -e "Subject: Foo\n\nBar\n" | sendmail -v -f [email protected] [email protected] I'm a bit lost on how all this comes together in sending mail from the command line.

  Read the article

• Crossover cable in addition to normal network connection on servers?

  - by Zero0ne

  I have 2 servers, both with Windows 2003 R2 Each have 2 NIC ports that are 10/100/1000 They are both connected to our LAN + joined to the domain (1 NIC port free on each server) The problem is that our main router is only 10/100 on the ports that these servers are connected to. Since one server is going to host SQL 2005 and the other will be running Altiris NS7, I was hoping that I could use a crossover cable to connect the two directly, thus taking advantage of their 1gbps NIC cards. Is this possible? If so what steps do I need to take to accomplish this? What needs to be done to make sure that when the app server is communicating with the SQL server that it is using the direct link vs traversing the LAN? Thanks a lot!

  Read the article

• Recover from running "route -f"

  - by James L.

  I was trying to capture localhost traffic with Ethereal, which doesn't work without re-routing localhost traffic to your router gateway. I didn't get the route command quite right, and messed up my routing table. I typed route -f to clear the routing table and rebooted, but when I finished rebooting, the routing table wasn't restored to its original state. I didn't use the -p parameter, so none of my changes should have persisted after a reboot. What can I do to restore the routing table to its default routes?

  Read the article

• Port Forwarding: Why do my local sites on 80 work but not those on 8080?

  - by Chadworthington

  I setup my router to forward port 80 to the PC hosting my web site. As a result, I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ When i click on this link, it works: http://localhost:8080/tfs/web/ I also forward port 8080 to the same web server box But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

  Read the article

• What is Light Peak

  - by Jonathan.

  I've heard this a lot recently, todo with Apple and Intel. Some says it's a protocol, others say it's fibre optic, and others say it's copper. One source even said it was a "wireless wire". Apparently it can carry data, but not video streams, surely the cable can't know the difference between 1s and 0s representing data, and 1s and 0s representing video streams. Or it will replace all the wires we currently have except power, another place said it is for inside laptops. Those are just examples so I haven't given any sources, I just want to know what on Earth Light Peak is?

  Read the article

• Vlan and Switch setting - dummy

  - by Andras Sebestyen

  I need to speak tomorrow the network engineer and I would like to understand his so apologise for the Dummy question: In the school we have a cab with a 24 port Netgear manageable switch with an admin and curriculum VLAN settings. Usually, as I over heard, in the morning and around 4.30pm there are a slowdown period on the computers which connect to this switch. No one could track this back yet. Questions: What is the best way to track back this slowdown Would it be a temporary solution to physical separate the two network with 2 switches If that would work how can I link them together to be able to see the curriculum from the admin side. Do I need an extra router then? Too many questions but I have no clue where to start and the gentleman will be paid by hours... can you see where I am coming from?:) Could you guide me in the right direction please? Any comment would be appreciated and please send links if you down vote the question:)

  Read the article

• What is your IT-department to staff ratio?

  - by Bart Silverstrim

  This is a topic that may be rather political but it related to system administration still...how many people do you have supporting your users in your IT department? We have three people supporting something near 1500 systems and around 2400 people and a recent question was raised about why we have long times to get systems replaced, repaired, work orders fulfilled, etc. along with the system admin duties of maintaining the servers (mail, proxy, filters, VOIP, wireless, backup, etc.) Does anyone have numbers on what the "best practices" average is of support people to employees in an organization? EDIT:...from some of the answers that are appearing I'm starting to feel depressed...

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• How to build a small network/server at home, basics

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial. I'm trying to get the hands on experience so my question is.... I want to build a small network in my home, wireless and also wired; printer, laptop, desktop, server (I have 4 1TB external drives of movies/music I want to be available to all computers) Where would I start from building a server with my hard drives, good modem, router, switch port, firewall internet speed/connection etc. This is my first project I want to try.

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >