Search Results

Search found 1202 results on 49 pages for 'specs'.

Page 22/49 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Stop RAID 5 from Initializing

  - by Antz

  Hi, I am trying to follow Ictinike's guide on Recovering Intel RAID "Non-Member Disk" Error found here, Ictinike's RAID recovery Guide I have recreated my RAID array as per the instructions. However my RAID array status is then automatically set to: INITIALIZE When I boot back into my Windows XP desktop, the Intel Matrix Storage Utility begins to "Initialize" my drives. This is a long slow process that will take about 20 hours. I suspect all my data will be lost. I have gone back into my bios and disabled my RAID controller to prevent any further initialization and data loss. I have read that initialization will cause data loss. I've also read somewhere that it won't. I am not so confident in the latter. Is there anyway to stop this initialization process so I can continue to follow the steps in the recovery guide? Some system specs: ABIT IP35 Pro Motherboard ICH9R on board RAID controller

  Read the article

• Using a Raspberry Pi as a VPN?

  - by sudo rm -rf

  So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

  Read the article

• Vista x64: Improving troubleshoot approach skills

  - by Chau

  I'm not a Windows SuperUser, but neither just the regular user. I don't mind browsing the Registry, using Process Explorer, reading the Event logs, (un)installing new drivers and so on, but all this only makes me solve some problems. I tend though to run into problems where these tools aren't enough. Which tools should I learn about to improve my troubleshooting skills in Windows? Currently I'm using Windows Vista x64 (not moved to 7 yet), facing audio/video stuttering problems and I think this is a good place to improve my troubleshooting skills. I know this post is similar to this question, but my machine is only hanging occationally. Specs: Intel Q6600 Stock speed ASUS P5QD Turbo 4GB ram NVIDIA GTS-8800 640 HDA Xplosion 7.1 Seasonic 430W Windows Vista Business x64

  Read the article

• Best SQL Server Configuration with this hardware.

  - by DavidStein

  I just received my new SQL Server from Dell. The server will be serve approximately 15 OLTP databases which average 10GB in size. Here are the basic specs: Dell PowerEdge R510 with up to 12 Hot Swap HDDs,LED Intel Xeon E5649 2.53GHz, 12M Cache, 5.86 GT/s QPI, 6 core (Quantity of 2) 48GB Memory (6x8GB), 1333MHz Dual Ranked RDIMMs for 2 Processors, Optimized PERC H700 Integrated RAID Controller, 1GB NV Cache 300GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 4) 600GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 6) My first thought was to use 3 arrays. OS - Raid 1 - (2)300GB T-Log - Raid 1 (2)300GB DB - Raid 5 (5) 600GB Backup - (1) 600GB - non-raided. However, I could also do the following after purchasing one more drive for backup. OS and T-Log - Raid 10 - (4)300GB DB - Raid 10 (6)600GB The hard drive space is not an issue as the databases are not that large. I'm just trying to optimize the speed of the applications using these databases. So, what would you guys recommend?

  Read the article

• Set Display Refresh Rate in OSX w/o External Utilities

  - by codedonut

  I have an iMac and an LG Flatron connected as a secondary monitor. The recommended resolution for the flatron is 1680x1050 @ 65.290 Hz (horiz), 59.954 Hz (vert). For some reason, OSX is choosing a slightly different set of scan rates and this is currently my best guess of why the monitor goes into power saving mode when connected to the iMac (but works fine on a PC). Now, I resolved this by installing switchResX and fudging the scan rates according to the specs in the manual. But how does one change these rates w/o 3rd party tools? Which config files need editing? Thanks

  Read the article

• Does anybody wish to help a poor researcher publish a paper?

  - by Mihai Todor

  I don't know if this is a good place to beg for help, but here it goes: basically, I need to run a secure recommender system simulation (C++ console application) in order to meet tonight's deadline, and the faculty's server grid decided to go offline. I could really use something like 10+ (actually, about 16 would be required to meet the deadline) virtual instances of some Linux that has GMP installed... Ideally, they should all have the same specs, because a part of the simulation will represent performance benchmarks. If my question is inappropriate in any way, I kindly ask the administrators to remove it.

  Read the article

• DC on Hyper V Host

  - by Saif Khan

  I've read a few similar questions but wasn't clear. I have a small office (13) users and recently purchased a new single server (this is all I have to work with for now). Server specs Memory - 16GB Drives - 6 SCSI (2TB) PROCESSOR - DUAL QUAD I plan on making the Hyper-V host the DC and then 2 VMs, one for a file server and the other an application server. Question - since I am restricted to this single server, would it be a big issue making the Hyper-V host the domain controller? Your input greatly appreciated.

  Read the article

• What kind of server hardware is roughly necessary to serve website to 10k users?

  - by jcmoney

  I've been looking at VPS's and the specs they offer for entry level setups seems somewhat surprising to me. I'm am new to this topic but many of VPS offer less than 512MB of memory and my laptop has 4GB of memory so I am curious what does it actually take in terms of hardware to serve say 10k users (say 5k daily active users)? I figure a large number of factors can probably sway this a lot but just for benchmarking, say the site is a social networking site written in php using mysql + apache that's not really doing anything unusual like serving lots of media. So essentially a very basic Facebook minus the absurd number of photos and videos. What about 100k users (50k daily active)? 1 million (500k daily active)? Thanks in advance.

  Read the article

• Ubuntu server 9.10 freezes up after ~10 minutes

  - by Matt Williamson

  I just upgraded my Ubuntu server from 9.04 to 9.10 and after about 10 minutes it locks up. It won't respond to ping, can't ssh in and the terminal doesn't accept keyboard input. It does not have X installed. I then reformatted and installed it from scratch with the same results. There are two hard drives, the first is for the OS and the second is for media. The second has not changed, it is an ext3 formatted drive with one partition. I stopped random services (samba, ushare, transmission-daemon) to see if they were causing the issue, but it still locked up. I did a watch "dmesg|tail" until it locked up, but I didn't see anything. How can I troubleshoot this further? I don't want to downgrade. Machine specs: Dell Dimension 3000 Pentium 4 @3GHz 512M RAM

  Read the article

• Weird problem, special characters coming after formatting the hard drive, computer isn't starting 0_

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting (quick format) and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• Office suite for eMAC

  - by Adam Pierce

  I have been given 10 old eMAC computers to donate to a local primary school. I am a PC person but I have volunteered to set these up with some kind of office suite. The specs are: 700MHz G4 640MB RAM (should be enough for anyone!) OS-X 10.3 40GB hard disc with 30GB free space I'd like a recommendataion for an office suite that will work on these old boxes. I have tried Open Office, both the latest version and 2.4.3 for PPC with no luck. Yes, I do have X11 installed.

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  Hello, I tried installing MediaPortal (http://www.team-mediaportal.com) on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3; 512mb DDR; 80GB IDE; K-World PVR-TV7131 Analog TV-Tuner; Inno3d FX5500 128mb 64bit; When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• What's the difference between these Asus socket 1155 motherboards?

  - by Johnny W

  I've looked on Asus's website, but they don't make it easy to understand what the differences are, and there's so many models to choose from! It's all spiel, and endless specs. How is anybody supposed to rifle through so much detail in order to make note of minor differences? If anyone already has this knowledge, I'd love to know what the major differences between these Z77 models are: P8Z77-V P8Z77-V DELUXE P8Z77-V LE P8Z77-V LE PLUS P8Z77-V LK P8Z77-V LX P8Z77-V PREMIUM P8Z77-V PRO P8Z77-V PRO/THUNDERBOLT Asus are famous for offering lots of solutions, but if there's no easy way to see the differences, how can you even consider what to buy? Their website does include a Comparison tool, but it's broken: I'm primarily interested in 1, 3, 4, 5 and 6, if that makes the task any easier. I'm sure there are people who have this knowledge. Thanks for any help.

  Read the article

• WebDAV "PROPFIND" exception in IIS due to network share?

  - by jacko

  We're finding continuous exceptions in our event viewer on our live box to the following exception: [snippet] Process information: Process ID: 3916 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: HttpException Exception message: Path 'PROPFIND' is forbidden. Thread information: Thread ID: 14 Thread account name: OURDOMAIN\Account Is impersonating: True Stack trace: at System.Web.HttpMethodNotAllowedHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Other Specs: Windows Server 2003 R2 & IIS 6.0 We've narrowed it down to occuring when people try to access shares on the box from within the network, and have discovered (we think) that its due to the WebDAV web services extension being previously disabled by past staff. The exceptions are being thrown when trying to access directories that are virtual dirs in IIS, and plain old UNC network shares What the implications for enabling the WebDAV extensions on our live web server? And will this solve our problems with the exceptions in our event log?

  Read the article

• Will Dolphin emulator run (smoothly) on this machine?

  - by Mark

  Product Specs: Intel® NM10 Express chipset /w Intel® Atom® D525 (dual-core, 1.8 GHz) I think the most I can put in there for RAM is 4 GB. (They don't make 8 GB SODIMM do they?) The Dolphin site is pretty vague about requirements: Windows XP or higher, or Linux, or MacOSX Intel Fast CPU with SSE2. GPU with Pixel Shader 2.0 or greater. Some integrated graphics chips work but it depends on the model (and only with DirectX 9). I'm trying to make a light-weight quiet little machine for streaming video and playing eumulators, and I'm trying to figure out the minimum requirements I will need to do what I want. I know I'm not supposed to ask for product recommendations here, so if you could just advise the minimum requirements in terms of CPU, graphics card, and RAM, that'd be helpful.

  Read the article

• Teamviewer and Virtualbox issue: some keys don't work

  - by Barranka

  I use Teamviewer on a laptop to connect to a desktop computer running Debian Linux. On this desktop computer I run Windows inside a VirtualBox VM. I have no problems interacting directly with Linux, but when I try to interact with Windows inside Virtualbox, some keys simply don't work! (e.g. period, "@", quotes). Is there something I can do to make the full keyboard of my laptop work correctly with the Virtualbox VM inside the remote host? Specs: The remote host machine is an Intel i7 running Debian squeezy (64 bit) I'm using Teamviewer 7, on both the host machine and the laptop Thanks

  Read the article

• Is there a rule of thumb for RAM upgrades?

  - by Retrosaur

  I'm having a hard time figuring out whether or not a certain laptop/computer's RAM can be upgraded or not. Is there a rule of thumb that determines how much max RAM one could add to a system without looking it up via external websites? A little bit of a background information: I work in computer sales at a computer electronics store, so it is virtually impossible for me to install any sort of software that would detect computer specs, and I get a lot of customers who wonder what laptop/desktop RAM upgrades usually are. Is there a certain rule that adding more RAM entails? Does it make a difference if it's a 32-bit or 64-bit machine? OS?

  Read the article

• Input not supported message when monitor is powered off then back on

  - by Jason Down

  I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• Finding a laptop to fit my spec's

  - by Mick

  I have a small list of characteristics that are required for a new laptop and have been looking for websites where I can specify my requirements and see which laptops fit the bill. I want to specify OS/RAM/HDD size/CD drive/screen resolution/battery life. I have found several sites so far where I can specify everything except battery life. Does such a site exist? I know that this is not a shopping site - but before any moderator rushes to close this question - please note that I am not asking "where do I buy this laptop" - merely what laptop fits this specs. I don't even care what country the website is based in.

  Read the article

• Caching DNS server (bind9.2) CPU usage is so so so high.

  - by Gk

  Hi, I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

  Read the article

• Most efficient Way to setup a game server

  - by alex bowers

  I'm running a PHP based game which has over 45 Million members predicted for end of this year (2011) Currently we are on 7.5 Million, this game is being ran on facebook and I am in desperate need to help get this game server as efficient and as powerful as possible. it is a dedicated server with Processor Manufacturer Intel Model i7 920 Frequency 4x 2x 2.66 GHz NIC GigaEthernet RAM 12 GB Hard disk 4 x 1 TB specs. It has apache installed, cPanel, phpMyAdmin, several apache mods and MySQL. The game also runs 47 mysql calls per second per user. Is there any alternatives to the above which could be faster, more efficient etc? I dont mind having to recode the game to fit to it, as long as it maximises our upper limit of members on the game. Thanks Also, is there a way to tell what our maximum limit to players, database calls etc is? Thank you again, hope you guys can help :)

  Read the article

• Computer not displaying anything

  - by Justen

  The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >