Search Results

Search found 7546 results on 302 pages for 'mail forwarding'.

Page 220/302 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

• network latency, TCP and UDP packets

  - by user115848

  Hello recently my network has started to cause me lots of problems. I have a cable modem, connected to a tp-link router (with some port forwarding). Everything was working fine then i started to get lots of udp (port 53) "UNREPLIED" logs in the router. Now there are tcp UNREPLIED logs too. This is causing lots of latency and failed connections when trying to connect to different internet sites. Also, we run an openfire server for spark connections, and I believe its causing connectivity issues for some users who are trying to connect using Spark (some people connect fine, others don't). Please see screen shot below for packet logs. It has to be something internally, as I connected straight to the comcast modem and i was able to connect to the internet and various sites as normal. I tried to swap out the router with a different and got the same issue. I scanned both my internal dns servers for viruses or malware and it came up empty. Another anomaly is that when i try to connect to www.cnn.com, i get redirected to the different site. I scanned my own machine for hijacks. Not sure if this is related to the networking issue. Please let me know if you have any ideas for troubleshooting.

  Read the article

• Exim queue in WHM

  - by Xobb

  Hi fellas, I've got the centos server with WHM. The mail server is exim. I need exim put all messages in queue and not sending directly.Though I've added the queue_only option to exim configuration and the messages are collected in the queue now. Afterwards I've found out that someone is calling exim -q to process the queue every once in a while. I've found the following cron job: 0 6 * * * /scripts/exim_tidydb > /dev/null 2>&1 which I beleive has been used to process the exim queue. Also I suspect that script was installed alongside with WHM. Surely I've commented it out and was expecting everything to work just fine. But that didn't happen. I still get the exim queue processed once in a while. Am I missing anything? What may cause my exim queue to process? Here is cat /etc/exim.conf | grep queue queue_only deliver_queue_load_max = 3 Thanks

  Read the article

• Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

  - by Mark C

  Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

  Read the article

• php5.4 + freebsd8.3+nginx can't get errors

  - by Alexey Perepechko

  I have a confusing behaviour. I can't get any error into log file or screen. I made a file index.php with content like this: "<?php a();".Normally, I will get message like this: "Call to undefined function a()" but when I called this script on my configuration I got nothing. Only white screen and empty logs. I checked all rights. I turned on all possible log file. Nothing. Please help me. My configuration is: freebsd 8.3-RELEASE PHP 5.4.7 (fpm-fcgi) nginx version: nginx/1.2.4 FPM-config [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice emergency_restart_threshold = 5 emergency_restart_interval = 2 process_control_timeout = 2 daemonize = yes events.mechanism = kqueue [puser] listen = /usr/local/www/host/tmp/php-fpm.sock; listen.backlog = -1 listen.allowed_clients = 127.0.0.1 listen.owner = puser listen.group = puser listen.mode = 0666 user = puser group = puser pm = dynamic pm.max_children = 30 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 50 slowlog = /usr/local/www/host/logs/fpm.log.slow request_slowlog_timeout = 1s rlimit_files = 1024 rlimit_core = 0 chroot = /usr/local/www/host/ catch_workers_output = yes env[HOSTNAME] = $HOSTNAME env[TMP] = /tmp env[TMPDIR] = /tmp env[TEMP] = /tmp php_admin_value[upload_tmp_dir] = /tmp php_admin_value[cgi.fix_pathinfo] = 0 php_admin_value[date.timezone]= 'Europe/Moscow' php_admin_value[memory_limit] = 320m php_admin_value[max_execution_time] = 180 php_admin_flag[log_errors] = on php_admin_value[error_log] = /logs/fpm-err.log php_admin_value[error_reporting] = 'E_ALL & ~E_NOTICE' php_admin_value[display_errors] = on php_admin_flag[display_startup_errors] = on NGINX config user www; worker_processes 2; worker_rlimit_nofile 80000; error_log /var/log/nginx_error.log notice; #pid logs/nginx.pid; events { worker_connections 2048; use kqueue; } http { server_tokens off; client_max_body_size 4m; include mime.types; default_type application/octet-stream; charset utf-8; sendfile on; keepalive_timeout 65; tcp_nopush on; tcp_nodelay on; log_format IP .$remote_addr.; log_format main '$remote_addr - $remote_user [$time_local] $request $request_body ' '"$status" $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; reset_timedout_connection on; server { listen 80; server_name www.example.com; access_log /usr/local/www/host/logs/access.log main; error_log /usr/local/www/host/logs/error.log error; error_page 500 502 503 504 /errors/50x.html; error_page 404 /errors/404.html; root /usr/local/www/host/htdocs; index index.php index.html index.htm; location / { index index.html index.php; try_files $uri /index.php?$args; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_intercept_errors on; fastcgi_pass unix:/usr/local/www/host/tmp/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /htdocs$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED /htdocs$fastcgi_script_name; include /usr/local/etc/nginx/fastcgi_params; } } } PHP config (php.ini) [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = dl,system,exec,passthru,shell_exec disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = On error_log = /var/log/php-fpm-error.log variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M max_file_uploads = 20 allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] date.timezone = Europe/Moscow [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Pdo_mysql] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [Interbase] [MySQL] mysql.allow_local_infile = On mysql.allow_persistent = On mysql.cache_size = 2000 mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_persistent = -1 mysqli.allow_persistent = On mysqli.max_links = -1 mysqli.cache_size = 2000 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [mysqlnd] mysqlnd.collect_statistics = On mysqlnd.collect_memory_statistics = Off [OCI8] [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] [ldap] ldap.max_links = -1 [mcrypt] [dba] I need to get errors on display and detailed record in the error.log.

  Read the article

• Choose identity from ssh-agent by file name

  - by leoluk

  Problem: I have some 20-30 ssh-agent identities. Most servers refuse authentication with Too many failed authentications, as SSH usually won't let me try 20 different keys to log in. At the moment, I am specifying the identity file for every host manually, using the IdentityFile and the IdentitiesOnly directive, so that SSH will only try one key file, which works. Unfortunately, this stops working as soon as the original keys aren't available anymore. ssh-add -l shows me the correct paths for every key file, and they match with the paths in .ssh/config, but it doesn't work. Apparently, SSH selects the indentity by public key signature and not by file name, which means that the original files have to be available so that SSH can extract the public key. There are two problems with this: it stops working as soon as I unplug the flash drive holding the keys it renders agent forwarding useless as the key files aren't available on the remote host Of course, I could extract the public keys from my identity files and store them on my computer, and on every remote computer I usually log into. This doesn't looks like a desirable solution, though. What I need is a possibility to select an identity from ssh-agent by file name, so that I can easily select the right key using .ssh/config or by passing -i /path/to/original/key, even on a remote host I SSH'd into. It would be even better if I could "nickname" the keys so that I don't even have to specify the full path.

  Read the article

• My VPS host (rosehosting) sold me a domain name, but I can't get it to work

  - by Faisal Vali

  My VPS host (rosehosting) sold me a domain name, but I can’t get it to work. They sent me an email with the following (almost a month ago) DNS Servers (unless you ordered your own DNS servers): ns1.rosehosting.com (216.114.78.148) ns2.rosehosting.com (216.114.78.155) Operating System: Ubuntu 9.04 Domain Name: mytestdomainfv.com Host Name: mytestdomainfv.com IP Address: .... Physical Host Name: Vs####.rosehosting.com When I type in the Physical Host Name or the IP from a remote computer I get connected to my VPS. But when i type 'mytestdomainfv.com' the name is never resolved, and it has been a month now. I thought that they would configure it so that it would, but it seems that they haven't. Does anyone know how I can get 'mytestdomainfv.com' to point to my VPS? I looked at some of the other similar questions, but they talk about forwarding GoDaddy domain names - so I'm not sure if it applies - but then again, it might just be my naivete. Any direction will be greatly appreciated. Thanks! p.s mytestdomainfv.com is not the real domain name

  Read the article

• Inconsistent DNS report results on different websites

  - by Saif Bechan

  I am checking my server dns setting on different websites. intodns,dnssy,dnscog, but on all the websites i get different results. Some say my mail server settings are not good, some say i have no A records for my NS records. Only on dnssy everything looks to be ok. Should i just trust the website with the best results, or what should i do? How does this sort of inconsistency occur in the first place. I am new to servers and dns, and this makes it very misleading.

  Read the article

• Office 2011 Mac, Sync calendars with google apps and iPhone

  - by Vincent

  Our office will be using Office 2011 for email contacts and calendar. Currently we are using apple mail/ical and address book. My primary concern is syncing calendars with google apps. That said our primary feature that we use google apps calendar for is sharing calendars. Best way to using office 2011... To sync calendars with an iPhone? To sync/share calendars between users? To sync contacts with an iphone? To sync/share contacts with between users? Users are on other computers and mostly work from home Needs to be fool proof once setup :-) I am not fond of the idea of syncing outlook with Mac address book and ical then to the iphone.

  Read the article

• How do I create a wifi network bridge with qemu on OS X?

  - by a paid nerd

  I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

  Read the article

• Mac OS X Snow Leopard: permissions changed on /var results in dns lookup issues

  - by Ivan

  I was attempting to solve an issue ("/var/log/msmtp.log: permissions denied" error when attempting to send mail using msmtp) when I did this: > chmod -R 770 /var After that, my machine would not resolve domain names via cURL. (ping also fails) But, oddly, I can enter domain names into Safari and visit any web pages w/o a problem... I'm actually not sure if the chmod command is the cause of the problem, but I suspect it is. Also, if I ls -l on /var (or /private/var) it doesn't seem that any of the subdirectories or files there actually changed permission, but there are many, so I can't say that conclusively... Incidentally, I fixed the original error (msmtp.log permission denied) by setting TMPDIR=/tmp in my local environment (bash). Now the error goes away, but I get this error: msmtp: cannot locate host domainname.org: nodename nor servname provided, or not known Any ideas about how to go about getting DNS working again?

  Read the article

• Email client supporting multiple accounts

  - by TGP1994

  I've been using Microsoft Outlook for a very long time, although one thing that has bugged me is how multiple email accounts are handled. As far as I can tell, there isn't a set and straightforward way of managing multiple accounts in one instance of outlook. For example, when I create an email, saving it as a draft will by default dump it into the first personal folder that I have open, which in my current case, is not where I want it. I would like all trash, spam, drafts, contacts, etc. etc. to be handled on a PF by PF basis. Now to my question: Is there a way to accomplish the task of email account "segregation" in Outlook (2007 is my current version), or is there another client that handles this in a more organized fashion? Note: I don't use most of the features in outlook (I hardly even need special formatting for my messages), I generally just send and read mail, and get a few attachments, so leaving Outlook wouldn't be too much of a stretch for me.

  Read the article

• Active Directory Child Domain Replication Problems

  - by MikeR

  Hi, I've recently inherited an Active Directory (all DCs Windows 2003) which has been configured with several child domains that are used as test environments for out CRM software. Two of these child domains have been used for testing using dates in the future (2015), throwing them well outside of the Kerberos tolerance for time, and they're flooding my event logs with replication errors such as the following: Description: The attempt to establish a replication link for the following writable directory partition failed. Directory partition: CN=Schema,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller: CN=NTDS Settings,CN=TESTDC001,CN=Servers,CN=SiteName,CN=Sites,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller address: 38e95b2a-35af-4174-84ba-9ab039528cce._msdcs.ad.xxxxxxx.com Intersite transport (if any): This domain controller will be unable to replicate with the source domain controller until this problem is corrected. User Action Verify if the source domain controller is accessible or network connectivity is available. Additional Data Error value: 5 Access is denied. I'd also like to upgrade to Windows 2008 at some point, but wouldn't want to attempt any schema updates while I'm not 100% confident on the replication. I'm guessing my only real solution will be to get rid of these child domains. The child domains are operating as stand alone domains, the DC is up and running and authenticating test users fine. I'm guessing the best solution to this would be to delete the domains (although I'd be happily told otherwise). The clock forwarding appears to have been happening for several years, so I'm assuming I can't just put the clock right (I'm guessing scope for this would be 180days, the same as the tombstone lifetime) With the replication errors would I be able to dcpromo the child domains DC, select it as the last domain controller in the domain and the child domain would be deleted? Or would I be better off treating the domain as an orphaned domain and use Microsoft's instructions to clear up as such. Any advice would be much appreciated.

  Read the article

• Syncronizing multiple exchange servers 2007

  - by Mustafa Ismail Mustafa

  We're introducing a new exchange server for several reasons. After the introduction of the new server, and synchronizing it with the old one (mailboxes, contacts, rules, the whole shebang) we're going to be formatting the old machine, install XenServer 5.5 on it, and create a slices, one of which will have Exchange server, which again will need to be synchronized. Then, we'll have 2 different routes to the mail servers (mx1, mx2) so that if there is an outage on one, the other should be available. So now, I'm wondering how to synch? I can move a mailbox from one server to the other, and I'm sure that can be done in bulk, but that's not what I'm looking for. I'm looking to make both Servers equal, the first time so I can make a backup of the original, and the second time so that they can be made into peers. This is with Exchange 2007 on Windows 2008 R2 (x64) Suggestions? TIA

  Read the article

• iptables logging to diferent file via syslog-ng

  - by rahrahruby

  I have the following configuration in my iptables and syslog files: IPTABLES -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 222 -j ACCEPT -A INPUT -p tcp -m tcp --dport 3306 -j ACCEPT -A INPUT -j DROP -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 SYSLOG-NG destination d_iptables { file("/var/log/iptables/iptables.log"); }; filter f_iptables { facility(kern) and match("IN=" value("MESSAGE")) and match("OUT=" value("MESSAGE")); }; filter f_messages { level(info,notice,warn) and not facility(auth,authpriv,cron,daemon,mail,news) and not filter(f_iptables); }; log { source(s_src); filter(f_iptables); destination(d_iptables); };` I restart syslog-ng and the log is not written.

  Read the article

• Steps to take when technical staff leave

  - by Tom O'Connor

  How do you handle the departure process when privileged or technical staff resign / get fired? Do you have a checklist of things to do to ensure the continuing operation / security of the company's infrastructure? I'm trying to come up with a nice canonical list of things that my colleagues should do when I leave (I resigned a week ago, so I've got a month to tidy up and GTFO). So far I've got: Escort them off the premises Delete their email Inbox (set all mail to forward to a catch-all) Delete their SSH keys on server(s) Delete their mysql user account(s) ... So, what's next. What have I forgotten to mention, or might be similarly useful? (endnote: Why is this off-topic? I'm a systems administrator, and this concerns continuing business security, this is definitely on-topic.)

  Read the article

• Printer options follow Office documents

  - by tkalve

  One person (John) creates an Office document, and prints this document to his HP printer which is using HP Universal Printing PS (v4.7) driver. He has got Job Storage (Personal job) enabled for this printer, with custom username and a personal PIN. He later sends this document in an e-mail to his colleagues. Another person (Anne) opens the document, and tries to print the document to her HP printer (also using HP Universal Printing driver), but is not able to fetch it on the printer. The Job Storage options from Johns computer follows the Office Excel document, so Anne has to change this manually to her username and her PIN before she can print. What on earth is causing this, and how do we fix it?

  Read the article

• Edit-text-files-over-SSH using a local text editor

  - by Mikko Ohtamaa

  I am working in various Linux and UNIX environments. I'd like to elegantly solve the problem of editing remote configuration files over SSH. Instead of using terminal editors (nano), I'd like to open the file in a local text editor on my desktop (Sublime Text 2). CyberDuck, WinSCP and various other SFTP apps can do this. Using editors over X11 forwarding has also proven to be problematic. Also using archaic text editors like Vim or Emacs do not serve my needs well. They could do this, but I prefer using other text editing software. Using ssh mounts (FUSE) are also problematic unless they can happen on the demand and triggered by the remote site. So what I hope to achieve Have a somekind of easily deployable shell script etc. which I can copy to remote server (let's call it mooedit) I run mooedit command on the remote server of which I have connected over SSH connection mooedit sends some kind of signal (over SSH( to my local desktop On my local desktop this signal is captured and it determines 'a ha! moo wants to edit a file on server X in folder Y' File is SFTP transfered to the local desktop (/tmp) File is opened in a nice GUI text editor on the local desktop When Save is pressed, the local desktop notices changes in the file and SFTP sends the resulting file back to the server The question is: What signaling mechanisms SSH provides for this? Any other methods to trigger a local text editor for remote SSH file?

  Read the article

• sendmail is using return-path instead of from address

  - by magd1

  I have a customer that is complaining about emails marked as spam. I'm looking at the header. It shows the correct From: [email protected] However, it doesn't like the return-path. Return-Path: <[email protected]> Received-SPF: neutral (google.com: x.x.x.x is neither permitted nor denied by domain of [email protected]) client-ip=x.x.x.x; Authentication-Results: mx.google.com; spf=neutral (google.com: x.x.x.x is neither permitted nor denied by domain of [email protected]) [email protected] How do I configure sendmail to use the From address for the Return-Path?

  Read the article

• prevent apt dependency from being satisfied (permanently)

  - by Bryan Hunt

  I want to install mailman (just to use it's mail archiving feature) but Ubuntu wants to pull down a load of extra dependencies. sudo apt-get install mailman Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: apache2 apache2-mpm-worker apache2.2-common Suggested packages: apache2-doc apache2-suexec apache2-suexec-custom spamassassin lynx listadmin Is there any way to mark those packages ( apache2 apache2-mpm-worker apache2.2-common ) as never to be installed? This is not 2002 ;)

  Read the article

• help with Outlook Exchange server and curl

  - by stib

  I work on a mac in a building full of PCs, and the IT department here doesn't have IMAP access turned on on the exchange servers. So I miss a lot of meetings because I don't get reminders because I access my mail via Outlook Web access. I had written a script to scrape my Outlook Web Access calendar and turn it into iCal format, so I could get my reminders via thunderbird or iCal.app. It basically downloaded the calendar page via curl, parsed the HTML and reformatted all the appointments as ical. it wasn't elegant, but it worked. Then they changed to outlook 2007, and it doesn't work any more. I have a sketchy knowledge of curl, and almost zero knowledge of how outlook works. Can anyone point me towards a reference for getting calendar info out of an exchange server without using outlook? If I can configure curl to get the HTML I will be happy, but if there's a more elegant way, such as getting the calendar info as XML I'll be delirious.

  Read the article

• Problem with OWA search. Mailstore catalogues

  - by Anthony

  Dear All, I have trawled for the last few days but have not been able to come up with a solution; any help would be much appreciated. Exchange 2007 STD on Windows 2003 64Bit and users report search not working in OWA. So I first check indexing is enabled on the mail stores Get-MailboxDatabase |ft Name,IndexEnabled which all report true, So I try a test Test-ExchangeSearch [email protected] Which is a false -1 Ok, So I run the reset - resetsearchindex.ps1 this works and the event log reports the stores being crawled and finished. BUT- My complete catalogue data is 300kb - LOL! I wish! Obviously all tests fail so I do it manually; Stop indexing service, Delete catalogues. Restart Still no dice, This is where I’m up to, I have tried many different variations of the above and being through oodles of MS documentation Has anyone got any ideas?

  Read the article

• Remote desktop type software that the client need not install anything...

  - by allentown

  I am primarily a Macintosh user, and can usually walk a client though any troubles they may have because I have a Macintosh in front of me. If they are on a different OS, things are close enough, or I cam remember, that I can get by. When trying to help clients on Windows, I get stuck. I do not have access to windows, and even if I did, there are far too many versions of Outlook, all with their various esoteric settings and checkboxes, that I could never see exactly what they are seeing. I mostly need to just help them with email setup. Something like copilot.com may do the trick. What is the simplest remote control software out there, ideally, it would accomplish these: No software needed on remote end, or, a single .exe that they can toss when done. I need Mac based software on my end. I do have ARD, which support VNC Free :) If possible, it would be really nice Needs a port forwarding proxy run by the company. There is no way I can get the user to alter their router, or to even plug directly into their WAN for a short time. On the Mac, I just have them open iChat, and this is all built in, proxying through AIM, looking for the same for Windows and Mac.

  Read the article

• What does 'http: getaddrinfo*.gaih_getanswer: got type "46"' mean

  - by koffie

  Today I got an e-mail from logcheck informing me that the following system event occurred. http: getaddrinfo*.gaih_getanswer: got type "46" Indeed, the above message occurs 4 times in /var/log/aut.log it occured twice yesterday around 6:46 am. And this morning it also occured twice around the same time. I wonder what this message means and if this message is something to worry about or if should just tell logcheck to ignore it. If it is something to worry about, then any pointers on how to fix the problem are appreciated.

  Read the article

• Is there a lightweight MTA for Ubuntu 9.10 Desktop?

  - by Joe Casadonte

  I'm writing a Perl script to run as a cron job, and I want to email results & errors to a local account on the laptop. I'd like something that can talk SMTP (do any MTAs not adhere to SMTP?). I use Thunderbird 3, so I'll also need a POP/IMAP server (unless T-Bird can read straight from an mbox file; I'll have to check into that). No need for spam controls as I'll lock it down real tight, only accepting mail originating from the laptop itself. Thanks!

  Read the article

• Send as another user / email address in Exchange 2010

  - by adamo

  In my setup there exist user1, ..., [email protected]. Mail for example.com is handled by Exchange 2010 and all the users user Outlook 2010. There also exists a Standard Distribution list named [email protected]. Is it possible to have some of the users being able to send email with [email protected] as the sender address? Can the sender's GECOS be different too when this happens so that the recipient sees "Offices of Example.com" instead of "User Name X"? Sometimes the secretaries need to send stuff as "the office" and not as theirselves ...

  Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >