Search Results

Search found 10406 results on 417 pages for 'device'.

Page 225/417 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• Why do I get "No root file system is defined" when I try install in one partition?

  - by Emilio

  The thing is that I have 3 partitions on my computer. /dev/sda1 Type: ntfs (size 104MB; 35MB in use) [This is Windows Loader] /dev/sda2 Type: ntfs (size 144598MB; 64536MB in use) [Here I want to install UBUNTU] /dev/sda3 Type: ntfs (size 105353MB; 20227MB in use) [This my backup partition I don't wan't to delete anything from here, I have all my necessary information] So the problem is when I select "Device for boot loader installation" "/dev/sda2" Pops out: "No root file system is defined. Please correct this from the partitioning menu." How can I resolve this? :)

  Read the article

• broadcom 43225 wireless on acer laptop is disabled

  - by Robbie

  I have a acer aspire 5820T with a broadcom 43225 wireless card. I previously used ubuntu 10.10 and the wireless worked straight away, but when I updated to 11.04 the wireless stopped working. I have managed to get the wireless hardware to switch on for a couple of seconds before turning off (When you turn the wireless on using the manual switch the wireless light stays on for a couple of seconds and in the drop down connections menu the information under wireless networks changes from 'device not ready' to 'Disconnected' but shows no wireless networks despite there being one). So far I have tried installing an additional driver, and also disabling the additional driver and installing b43-fwcutter and firmware b43 installer. There may have been other things that I've found in searches that i've tried but unfortunately I can't remember them. Any help would be appreciated.

  Read the article

• Is there an open source alternative to "Adobe Digital Editions"?

  - by soulsource

  For the moment I run Adobe Digital Editions under Wine to download ebooks burdened with ditigal restriction management. I only use it to open .acsm files supplied by ebook-shops, which contain authentication information required to download the actual DRM'ed ebook files, which I then transfer to my reader-device with calibre. My question is, if there exist open source alternatives to Adobe Digital Editions. They don't need much functionality. I just want to put the .acsm-file in and get the .epub out (no, I don't want to remove the drm, that'd be illegal afaik).

  Read the article

• How do I plot individual pixels using the XNA APIs?

  - by izb

  If I wanted to fill my game screen with individually coloured pixels, how would I do this? For example, if I wanted to write a 'game of life'-type game where each pixel was a cell, how would I achieve this using XNA? I've tried just calling SetData() on a Texture2D object using a screen-sized array of Color values, but it complains with: You may not call SetData on a resource while it is actively set on the GraphicsDevice. Unset it from the device before calling SetData. How do I do as it asks? Or better still... is there an alternative, better, efficient way to fill a screen with arbitrary pixels?

  Read the article

• Broadcom 4365 wireless driver on 12.04 with 3.4 / 3.5 kernel

  - by zaid

  I used this package to install the driver on 3.2 Kernel and it was working perfectly. Unfortunately the system used to freeze randomly with 3.2 kernel so I installed 3.4 kernel, now there is no freezing, the only problem is that my wifi card is not working, I tried to re-install the package, but didn't work. I can see the driver in the "additional drivers" and it say that it is active, but when I execute iwconfig it doesn't show up. I've even tried ndiswraper and that didn't work either. my lspci: 01:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• trouble detecing huawei EC156 in ubuntu 12.04

  - by naina

  the data card is never detected automatically...its detected only when i fire a lsusb. Later i give modeswitch commands etc etc...then the device works fine..i can easily use internet...but once i disconnect from the net, its impossible to reestablish the connection...to reconnect i have to type all the commands, starting with lsusb, in the terminal again..ie every time i want a connection i have to sit and type 5-6 commands in the terminal before i can get through. what can be done to get automatic net connection as soon as i plug in the data card...please help...

  Read the article

• How to control fan speed and temperatures on Asus A8Js laptop?

  - by Azeworai

  I have tried installing asusfan and lm-sensors but I'm unable to control my fans to cool my laptop down sufficiently. Currently it overheats at about 100 degrees celsius and my sensors output somehow does not have any fan information on it: jackson@OLYMPIA:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +69.0°C (crit = +110.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +66.0°C (high = +100.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +66.0°C (high = +100.0°C, crit = +100.0°C) I have checked my bios and there isn't any fan settings there. I can consistently overheat just by converting a video via Handbrake. I have ubuntu-desktop installed for a GUI. Is there a way for me to control my fans to start spinning before it reaches a critical temperature and kills itself?

  Read the article

• 'unknown filesystem' grub rescue prompt; trying to wipe drive and boot 10.10 live

  - by Patrick

  Im currently running Win7, and want to wipe the drive and install 10.10. I have 10.10 loaded on a USB thumbdrive and it sees the device in BIOS but it only reaches a screen saying; Unknown Filesystem grub rescue> Ive read several results from google and a couple here where people are trying to dual boot and i assume save the data on the drive, but i dont care about doing that, and would prefer to just wipe the drive and start fresh. What steps can i take to get the drive to a point where i can load 10.10 live and get it installed?

  Read the article

• Can not install Ubuntu 12.04 or 12.10 on Toshiba qosmio x870. Please help!

  - by Mighty

  I have a new Toshiba qosmio x870 and for the past one week I have been trying to install Ubuntu 12.04 from a USB and Live CD without success. I keep on getting this error: Boot failure: a proper digital signature was not found. One or more files on the selected boot device was rejected by the Secure Boot feature. I even tried installing Ubuntu with the Windows installer. After installation and I reboot the PC, first I see the error that points to: \ubuntu\winboot\wubildr.mbr Status: 0xc000007b Info: The OS couldn't be loaded because a required file is missing or contains errors. When I restart, that the previous error doesn't show up and I see both Windows 8 and Ubuntu (happy that I was successful) but when I click on Ubuntu, it flags an error. This is the first time I'm having a Secure Boot-capable PC. What will be the danger in disabling the secure boot? I'll be happy if I can get assistance from anyone.

  Read the article

• Energy saving with two batteries (Gigabyte S1080 and similar)

  - by user37155

  my today question is: how do I manage a tablet (Gigabyte 1080) with an additional battery in Ubuntu ? The control bar shows two separate batteries but starts to suck all the energy from the secundary battery, not leaving any power in it and ruining it (if I don't remove it earlier), and then starts with the primary battery. Here you find a description of the secundary battery: http://www.gigabyte.com/products/product-page.aspx?pid=3837#kf Do you have some solutions for a more confortable use of te device, with windows-like drivers maybe ? Is there a graphical tool to manage two batteries in Linux, in order not to ruin them, and possibly to save energy with them ? Many thanks and greetings, Francesco

  Read the article

• Is there a way to emulate pinch-zoom?

  - by aking1012

  I'm looking for a way to emulate pinch zoom in either an android emulator(android SDK-less desirable) or a (preferred) native Ubuntu web browser that I can resize to a specified size for initial testing of HTML5 applications. This is would be useful for first round testing during cross-platform application development. Note: I'm trying to do this with no real touch-device only a mouse. So the best answer would be something like "Install this chromium plug-in and use this hotkey to set pinch points" or something similar. We already have this for getting dual mouse working(thanks AmithKK). The browser that supports multi-touch is the hard part. Something to note is that I start getting screen artifacts using multiple mice via that guide. They're mild and tolerable, but they are there.

  Read the article

• Best tool to understand source

  - by cache

  I have a source code for a project. I am working on porting it to another device as the current source code is for a linux environment. I am having some error on the newly ported code. So i was thinking it would be best to once again understand the whole source code and this will help me localise the errors. Now the problem is that i tried using 'gdb' for linux to debug the code but it does not help. So is there any tool that I can use to trace the program line by line ? By doing so i can understand the program flow. Please Help !

  Read the article

• Why Ubuntu is not booting anymore from USB live?

  - by xRobot

  I have just purchased a brand new laptop Samsung 300e5c with Windows 7. So I have reduce the windows partition and I have installed ubuntu 12.04 from my USB pen drive. Then I have tried to boot again from USB pen drive but it doesn't work anymore. I have tryed to boot on others laptop from my USB pen drive and it does work perfectly. but on my laptop, NO :(. I have set all USB drive as first boot device in BIOS. I have tryed on each USB port of my laptop but it doesn't work. Only the first time it did work when I installed ubuntu and now it doesn't work anymore. It's very strange I can see the content of the usb pen drive on my laptop and on others laptop without problems. why it doesn't work anymore ?

  Read the article

• How do you maintain content size vs. content quality in an application?

  - by PeterK

  I am developing my first Cocos2d iPhone/iPad game that includes quite a few sprites, I would need approximately 80 different. As this is for both normal and HD displays I have 2x of each sprite. I am using TexturePacker to optimize the thing. I would like to ask if there are any rules-of-thumb, tricks, ideas etc. to adjust to in regards to size of content, quality and how you maintain high-quality HD-based graphics due to its size vs. the device memory sizes? Also, is it a good idea to only have one copy of the sprites and scale it using code?

  Read the article

• Simpler Times

  - by Simon Moon

  Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

  Read the article

• My Dog Ate My Surface

  - by Richard Jones

  Working for a Microsoft partner I was very fortunate enough to be given clearance to order a Microsoft Surface RT tablet. Justification, show new device to a customer event this Thursday. All good, time to develop an App. Surface arrived last Wednesday. Overnight, Coco our much loved one year old puppy Larba-Doodle pulled the power chord out of my bag and bit right through the cable (at the power-brick end). A quick re-order to Microsoft saved the day. Demo went great. Surface is fab, Coco; much loved too Laptop bag now placed a bit higher up in our house.

  Read the article

• How can I enable audio system on Envy 15t-3200

  - by Dean Howell

  I just received my HP Envy 15 (June 2012 model) and I cannot get my audio system to fully function. This laptop has 6 speakers. 1.) 2 speakers on the front of the laptop (Stereo). 2.) 2 speakers above the keyboard, just before the LCD hinges. 3.) 2 Subwoofer speakers underneath the battery cover facing downward. Only the 2 speakers in the front are working. This is a "Beats" audio system. There have been many beats audio laptops before this one, so maybe if someone has experience with those, it might translate to this device.

  Read the article

• No inodes left error, df -i command says contrary

  - by abhinavkulkarni

  I copied a lot of files in my mounted Windows drive from Ubuntu and I subsequently ran into Error opening file '/media/windows/<some-file-path>': No space left on device error. I checked the output of df -i command to see if I had ran out of inodes for the mounted Windows drive: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda5 2363904 504119 1859785 22% / udev 207621 522 207099 1% /dev tmpfs 211487 450 211037 1% /run none 211487 3 211484 1% /run/lock none 211487 7 211480 1% /run/shm none 211487 19 211468 1% /run/user /dev/sda2 458686680 2588876 456097804 1% /media/windows As above output shows, lots of inodes are available for /media/windows drive. I have plenty of disk space left - around 500GB. What's the problem then?

  Read the article

• How will the launcher/button work on a touch panel?

  - by burli

  I'm not sure if Unity has a design problem. If the Launcher is hidden you can bring it to front by moving the mouse over the home button or hit the Super Key. So far, so good. But what is on Tablet Devices with touch panel? Intuitively I would "click" in the corner to show the launcher, but a click will open the Dash. How should that work on a touch device? Do I have to "drag" my finger into the corner? Will touch devices have a "menu button"? Will there be a gesture to show the launcher?

  Read the article

• Is there a size limit when using UICollectionView as tiled map for iOS game?

  - by Alexander Winn

  I'm working on a turn-based strategy game for iOS, (picture Civilization 2 as an example), and I'm considering using a UICollectionView as my game map. Each cell would be a tile, and I could use the "didSelectCell" method to handle player interaction with each tile. Here's my question: I know that UICollectionViewCells are dequeued and reused by the OS, so does that mean that the map could support an effectively infinitely-large map, so long as only a few cells are onscreen at a time? However many cells were onscreen would be held in memory, and obviously the data source would take up some memory, but would my offscreen map be limited to a certain size or could it be enormous so long as the number of cells visible at any one time wasn't too much for the device to handle? Basically, is there any memory weight to offscreen cells, or do only visible cells have any impact?

  Read the article

• How do you maintain content size vs. content quality in a mobile application?

  - by PeterK

  I am developing my first Cocos2d iPhone/iPad game that includes quite a few sprites, I would need approximately 80 different. As this is for both normal and HD displays I have 2x of each sprite. I am using TexturePacker to optimize the thing. I would like to ask if there are any rules-of-thumb, tricks, ideas etc. to adjust to in regards to size of content, quality and how you maintain high-quality HD-based graphics due to its size vs. the device memory sizes? Also, is it a good idea to only have one copy of the sprites and scale it using code?

  Read the article

• Windows Not Sleeping All Night

  - by John Paul Cook

  Having a computer wake up when you don’t want it to wastes electricity and drains the battery on mobile devices. My desktop had been waking up at night, so I assumed it was some network traffic on my home network. I unchecked Allow this device to wake the computer on my network adapters . Figure 1. Network adapter Power Management tab. That didn’t solve the problem. I included the screen capture in Figure 1 because it could be part of the solution for someone else. To identify the root cause instead...(read more)

  Read the article

• Sound coming out of headphone when running Ubuntu, but not window 7

  - by MrSimon

  I've downloaded Ubuntu yesterday, and I thought that everything went smoothly, until I found out a problem today. When I am running the Ubuntu OS on my laptop, the Samsung RC420, the speaker and the headphone works fine. However, when I am running the Window 7 OS, the speaker works fine, but my headphone will not emit any sound although the laptop has detected that 'a device has been plugged into the audio jack'. The same problem persist when I connect my X-minis as well. I tried updating my sound card drivers, check if they are hidden/disabled/disconnected and everything else. Nothing works :(

  Read the article

• Skynet Big Data Demo Using Hexbug Spider Robot, Raspberry Pi, and Java SE Embedded (Part 4)

  - by hinkmond

  Here's the first sign of life of a Hexbug Spider Robot converted to become a Skynet Big Data model T-1. Yes, this is T-1 the precursor to the Cyberdyne Systems T-101 (and you know where that will lead to...) It is demonstrating a heartbeat using a simple Java SE Embedded program to drive it. See: Skynet Model T-1 Heartbeat It's alive!!! Well, almost alive. At least there's a pulse. We'll program more to its actions next, and then finally connect it to Skynet Big Data to do more advanced stuff, like hunt for Sara Connor. Java SE Embedded programming makes it simple to create the first model in the long line of T-XXX robots to take on the world. Raspberry Pi makes connecting it all together on one simple device, easy. Next post, I'll show how the wires are connected to drive the T-1 robot. Hinkmond

  Read the article

• How to use unused space in ubuntu

  - by Ravi.Kumar

  I installed ubuntu on my machine with only 80 GB of memory anticipating that I will remove it later but now I want to keep it forever (until I am frustrated with linux). I have 500 GB in my machine and now I want to use that raw 420 GB of space. How I can I do that ? with "space/memory" I am referring to secondary memory not Ram. Here is output of : sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dcb77 Device Boot Start End Blocks Id System /dev/sda1 * 2048 136718335 68358144 83 Linux

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >