Search Results

Search found 11972 results on 479 pages for 'writing'.

Page 227/479 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

  • Do you have suggestions for these assembly mnemonics?

    - by Noctis Skytower
    Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller halt End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

    Read the article

  • Using GA in GUI

    - by AlexT
    Sorry if this isn't clear as I'm writing this on a mobile device and I'm trying to make it quick. I've written a basic Genetic Algorithm with a binary encoding (genes) that builds a fitness value and evolves through several iterations using tournament selection, mutation and crossover. As a basic command-line example it seems to work. The problem I've got is with applying a genetic algorithm within a GUI as I am writing a maze-solving program that uses the GA to find a method through a maze. How do I turn my random binary encoded genes and fitness function (add all the binary values together) into a method to control a bot around a maze? I have built a basic GUI in Java consisting of a maze of labels (like a grid) with the available routes being in blue and the walls being in black. To reiterate my GA performs well and contains what any typical GA would (fitness method, get and set population, selection, crossover, etc) but now I need to plug it into a GUI to get my maze running. What needs to go where in order to get a bot that can move in different directions depending on what the GA says? Rough pseudocode would be great if possible As requested, an Individual is built using a separate class (Indiv), with all the main work being done in a Pop class. When a new individual is instantiated an array of ints represent the genes of said individual, with the genes being picked at random from a number between 0 and 1. The fitness function merely adds together the value of these genes and in the Pop class handles selection, mutation and crossover of two selected individuals. There's not much else to it, the command line program just shows evolution over n generations with the total fitness improving over each iteration. EDIT: It's starting to make a bit more sense now, although there are a few things that are bugging me... As Adamski has suggested I want to create an "Agent" with the options shown below. The problem I have is where the random bit string comes into play here. The agent knows where the walls are and has it laid out in a 4 bit string (i.e. 0111), but how does this affect the random 32 bit string? (i.e. 10001011011001001010011011010101) If I have the following maze (x is the start place, 2 is the goal, 1 is the wall): x 1 1 1 1 0 0 1 0 0 1 0 0 0 2 If I turn left I'm facing the wrong way and the agent will move completely off the maze if it moves forward. I assume that the first generation of the string will be completely random and it will evolve as the fitness grows but I don't get how the string will work within a maze. So, to get this straight... The fitness is the result of when the agent is able to move and is by a wall. The genes are a string of 32 bits, split into 16 sets of 2 bits to show the available actions and for the robot to move the two bits need to be passed with four bits from the agent showings its position near the walls. If the move is to go past a wall the move isn't made and it is deemed invalid and if the move is made and if a new wall is found then the fitness goes up. Is that right?

    Read the article

  • mySQL to .XSL help

    - by kielie
    hi guys, I have to create a script that takes a mySQL table, and exports it into .XSL format, and then saves that file into a specified folder on the web host. I got it working, but now I can't seem to get it to automatically save the file to the location without prompting the user. It needs to run every day at a specified time, so it can save the previous days leads into a .XSL file on the web host. Here is the code: <?php // DB TABLE Exporter // // How to use: // // Place this file in a safe place, edit the info just below here // browse to the file, enjoy! // CHANGE THIS STUFF FOR WHAT YOU NEED TO DO $dbhost = "-"; $dbuser = "-"; $dbpass = "-"; $dbname = "-"; $dbtable = "-"; // END CHANGING STUFF $cdate = date("Y-m-d"); // get current date // first thing that we are going to do is make some functions for writing out // and excel file. These functions do some hex writing and to be honest I got // them from some where else but hey it works so I am not going to question it // just reuse // This one makes the beginning of the xls file function xlsBOF() { echo pack("ssssss", 0x809, 0x8, 0x0, 0x10, 0x0, 0x0); return; } // This one makes the end of the xls file function xlsEOF() { echo pack("ss", 0x0A, 0x00); return; } // this will write text in the cell you specify function xlsWriteLabel($Row, $Col, $Value ) { $L = strlen($Value); echo pack("ssssss", 0x204, 8 + $L, $Row, $Col, 0x0, $L); echo $Value; return; } // make the connection an DB query $dbc = mysql_connect( $dbhost , $dbuser , $dbpass ) or die( mysql_error() ); mysql_select_db( $dbname ); $q = "SELECT * FROM ".$dbtable." WHERE date ='$cdate'"; $qr = mysql_query( $q ) or die( mysql_error() ); // Ok now we are going to send some headers so that this // thing that we are going make comes out of browser // as an xls file. // header("Pragma: public"); header("Expires: 0"); header("Cache-Control: must-revalidate, post-check=0, pre-check=0"); header("Content-Type: application/force-download"); header("Content-Type: application/octet-stream"); header("Content-Type: application/download"); //this line is important its makes the file name header("Content-Disposition: attachment;filename=export_".$dbtable.".xls "); header("Content-Transfer-Encoding: binary "); // start the file xlsBOF(); // these will be used for keeping things in order. $col = 0; $row = 0; // This tells us that we are on the first row $first = true; while( $qrow = mysql_fetch_assoc( $qr ) ) { // Ok we are on the first row // lets make some headers of sorts if( $first ) { foreach( $qrow as $k => $v ) { // take the key and make label // make it uppper case and replace _ with ' ' xlsWriteLabel( $row, $col, strtoupper( ereg_replace( "_" , " " , $k ) ) ); $col++; } // prepare for the first real data row $col = 0; $row++; $first = false; } // go through the data foreach( $qrow as $k => $v ) { // write it out xlsWriteLabel( $row, $col, $v ); $col++; } // reset col and goto next row $col = 0; $row++; } xlsEOF(); exit(); ?> I tried using, fwrite to accomplish this, but it didn't seem to go very well, I removed the header information too, but nothing worked. Here is the original code, as I found it, any help would be greatly appreciated. :-) Thanx in advance. :-)

    Read the article

  • Reading serialised object from file

    - by nico
    Hi everyone. I'm writing a little Java program (it's an ImageJ plugin, but the problem is not specifically ImageJ related) and I have some problem, most probably due to the fact that I never really programmed in Java before... So, I have a Vector of Vectors and I'm trying to save it to a file and read it. The variable is defined as: Vector <Vector <myROI> > ROIs = new Vector <Vector <myROI> >(); where myROI is a class that I previously defined. Now, to write the vector to a file I use: void saveROIs() { SaveDialog save = new SaveDialog("Save ROIs...", imp.getTitle(), ".xroi"); String name = save.getFileName(); if (name == null) return; String dir = save.getDirectory(); try { FileOutputStream fos = new FileOutputStream(dir+name); ObjectOutputStream oos = new ObjectOutputStream(fos); oos.writeObject(ROIs); oos.close(); } catch (Exception e) { IJ.log(e.toString()); } } This correctly generates a binary file containing (I suppose) the object ROIs. Now, I use a very similar code to read the file: void loadROIs() { OpenDialog open = new OpenDialog("Load ROIs...", imp.getTitle(), ".xroi"); String name = open.getFileName(); if (name == null) return; String dir = open.getDirectory(); try { FileInputStream fin = new FileInputStream(dir+name); ObjectInputStream ois = new ObjectInputStream(fin); ROIs = (Vector <Vector <myROI> >) ois.readObject(); // This gives error ois.close(); } catch (Exception e) { IJ.log(e.toString()); } } But this function does not work. First, I get a warning: warning: [unchecked] unchecked cast found : java.lang.Object required: java.util.Vector<java.util.Vector<myROI>> ROIs = (Vector <Vector <myROI> >) ois.readObject(); ^ I Googled for that and see that I can suppress by prepending @SuppressWarnings("unchecked"), but this just makes things worst, as I get an error: <identifier> expected ROIs = (Vector <Vector <myROI> >) ois.readObject(); ^ In any case, if I omit @SuppressWarnings and ignore the warning, the object is not read and an exception is thrown java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: myROI Again Google tells me myROI needs to implements Serializable. I tried just adding implements Serializable to the class definition, but it is not sufficient. Can anyone give me some hints on how to procede in this case? Also, how to get rid of the typecast warning?

    Read the article

  • What's a clean way to have the server return a JavaScript function which would then be invoked?

    - by Khnle
    My application is architected as a host of plug-ins that have not yet been written. There's a long reason for this, but with each new year, the business logic will be different and we don't know what it will be like (Think of TurboTax if that helps). The plug-ins consist of both server and client components. The server components deals with business logic and persisting the data into database tables which will be created at a later time as well. The JavaScript manipulates the DOM for the browsers to render afterward. Each plugin lives in a separate assembly, so that they won't disturb the main application, i.e., we don't want to recompile the main application. Long story short, I am looking for a way to return JavaScript functions to the client from an Ajax get request, and execute these JavaScript functions (which are just returned). Invoking a function in Javascript is easy. The hard part is how to organize or structure so that I won't have to deal with maintenance problem. So concat using StringBuilder to end up with JavaScript code as a result of calling toString() from the string builder object is out of the question. I want to have no difference between writing JavaScript codes normally and writing Javascript codes for this dynamic purpose. An alternative is to manipulate the DOM on the server side, but I doubt that it would be as elegantly as using jQuery on the client side. I am open for a C# library that supports chainable calls like jQuery that also manipulates the DOM too. Do you have any idea or is it too much to ask or are you too confused? Edit1: The point is to avoid recompiling, hence the plug-ins architecture. In some other parts of the program, I already use the concept of dynamically loading Javascript files. That works fine. What I am looking here is somewhere in the middle of the program when an Ajax request is sent to the server. Edit 2: To illustrate my question: Normally, you would see the following code. An Ajax request is sent to the server, a JSON result is returned to the client which then uses jQuery to manipulate the DOM (creating tag and adding to the container in this case). $.ajax({ type: 'get', url: someUrl, data: {'': ''}, success: function(data) { var ul = $('<ul>').appendTo(container); var decoded = $.parseJSON(data); $.each(decoded, function(i, e) { var li = $('<li>').text(e.FIELD1 + ',' + e.FIELD2 + ',' + e.FIELD3); ul.append(li); }); } }); The above is extremely simple. But next year, what the server returns is totally different and how the data to be rendered would also be different. In a way, this is what I want: var container = $('#some-existing-element-on-the-page'); $.ajax({ type: 'get', url: someUrl, data: {'': ''}, success: function(data) { var decoded = $.parseJSON(data); var fx = decoded.fx; var data = decode.data; //fx is the dynamic function that create the DOM from the data and append to the existing container fx(container, data); } }); I don't need to know, at this time what data would be like, but in the future I will, and I can then write fx accordingly.

    Read the article

  • C++ file input/output search

    - by Brian J
    Hi I took the following code from a program I'm writing to check a user generated string against a dictionary as well as other validation. My problem is that although my dictionary file is referenced correctly,the program gives the default "no dictionary found".I can't see clearly what I'm doing in error here,if anyone has any tips or pointers it would be appreciated, Thanks. //variables for checkWordInFile #define gC_FOUND 99 #define gC_NOT_FOUND -99 // static bool certifyThat(bool condition, const char* error) { if(!condition) printf("%s", error); return !condition; } //method to validate a user generated password following password guidelines. void validatePass() { FILE *fptr; char password[MAX+1]; int iChar,iUpper,iLower,iSymbol,iNumber,iTotal,iResult,iCount; //shows user password guidelines printf("\n\n\t\tPassword rules: "); printf("\n\n\t\t 1. Passwords must be at least 9 characters long and less than 15 characters. "); printf("\n\n\t\t 2. Passwords must have at least 2 numbers in them."); printf("\n\n\t\t 3. Passwords must have at least 2 uppercase letters and 2 lowercase letters in them."); printf("\n\n\t\t 4. Passwords must have at least 1 symbol in them (eg ?, $, £, %)."); printf("\n\n\t\t 5. Passwords may not have small, common words in them eg hat, pow or ate."); //gets user password input get_user_password: printf("\n\n\t\tEnter your password following password rules: "); scanf("%s", &password); iChar = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iUpper = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iLower =countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iSymbol =countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iNumber = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); iTotal = countLetters(password,&iUpper,&iLower,&iSymbol,&iNumber,&iTotal); if(certifyThat(iUpper >= 2, "Not enough uppercase letters!!!\n") || certifyThat(iLower >= 2, "Not enough lowercase letters!!!\n") || certifyThat(iSymbol >= 1, "Not enough symbols!!!\n") || certifyThat(iNumber >= 2, "Not enough numbers!!!\n") || certifyThat(iTotal >= 9, "Not enough characters!!!\n") || certifyThat(iTotal <= 15, "Too many characters!!!\n")) goto get_user_password; iResult = checkWordInFile("dictionary.txt", password); if(certifyThat(iResult != gC_FOUND, "Password contains small common 3 letter word/s.")) goto get_user_password; iResult = checkWordInFile("passHistory.txt",password); if(certifyThat(iResult != gC_FOUND, "Password contains previously used password.")) goto get_user_password; printf("\n\n\n Your new password is verified "); printf(password); //writing password to passHistroy file. fptr = fopen("passHistory.txt", "w"); // create or open the file for( iCount = 0; iCount < 8; iCount++) { fprintf(fptr, "%s\n", password[iCount]); } fclose(fptr); printf("\n\n\n"); system("pause"); }//end validatePass method int checkWordInFile(char * fileName,char * theWord){ FILE * fptr; char fileString[MAX + 1]; int iFound = -99; //open the file fptr = fopen(fileName, "r"); if (fptr == NULL) { printf("\nNo dictionary file\n"); printf("\n\n\n"); system("pause"); return (0); // just exit the program } /* read the contents of the file */ while( fgets(fileString, MAX, fptr) ) { if( 0 == strcmp(theWord, fileString) ) { iFound = -99; } } fclose(fptr); return(0); }//end of checkwORDiNFile

    Read the article

  • Log4j: Events appear in the wrong logfile

    - by Markus
    Hi there! To be able to log and trace some events I've added a LoggingHandler class to my java project. Inside this class I'm using two different log4j logger instances - one for logging an event and one for tracing an event into different files. The initialization block of the class looks like this: public void initialize() { System.out.print("starting logging server ..."); // create logger instances logLogger = Logger.getLogger("log"); traceLogger = Logger.getLogger("trace"); // create pattern layout String conversionPattern = "%c{2} %d{ABSOLUTE} %r %p %m%n"; try { patternLayout = new PatternLayout(); patternLayout.setConversionPattern(conversionPattern); } catch (Exception e) { System.out.println("error: could not create logger layout pattern"); System.out.println(e); System.exit(1); } // add pattern to file appender try { logFileAppender = new FileAppender(patternLayout, logFilename, false); traceFileAppender = new FileAppender(patternLayout, traceFilename, false); } catch (IOException e) { System.out.println("error: could not add logger layout pattern to corresponding appender"); System.out.println(e); System.exit(1); } // add appenders to loggers logLogger.addAppender(logFileAppender); traceLogger.addAppender(traceFileAppender); // set logger level logLogger.setLevel(Level.INFO); traceLogger.setLevel(Level.INFO); // start logging server loggingServer = new LoggingServer(logLogger, traceLogger, serverPort, this); loggingServer.start(); System.out.println(" done"); } To make sure that only only thread is using the functionality of a logger instance at the same time each logging / tracing method calls the logging method .info() inside a synchronized-block. One example looks like this: public void logMessage(String message) { synchronized (logLogger) { if (logLogger.isInfoEnabled() && logFileAppender != null) { logLogger.info(instanceName + ": " + message); } } } If I look at the log files, I see that sometimes a event appears in the wrong file. One example: trace 10:41:30,773 11080 INFO masterControl(192.168.2.21): string broadcast message was pushed from 1267093 to vehicle 1055293 (slaveControl 1) trace 10:41:30,784 11091 INFO masterControl(192.168.2.21): string broadcast message was pushed from 1156513 to vehicle 1105792 (slaveControl 1) trace 10:41:30,796 11103 INFO masterControl(192.168.2.21): string broadcast message was pushed from 1104306 to vehicle 1055293 (slaveControl 1) trace 10:41:30,808 11115 INFO masterControl(192.168.2.21): vehicle 1327879 was pushed to slave control 1 10:41:30,808 11115 INFO masterControl(192.168.2.21): string broadcast message was pushed from 1101572 to vehicle 106741 (slaveControl 1) trace 10:41:30,820 11127 INFO masterControl(192.168.2.21): string broadcast message was pushed from 1055293 to vehicle 1104306 (slaveControl 1) I think that the problem occures everytime two event happen at the same time (here: 10:41:30,808). Does anybody has an idea how to solve my problem? I already tried to add a sleep() after the method call, but that doesn't helped ... BR, Markus Edit: logtrace 11:16:07,75511:16:07,755 1129711297 INFOINFO masterControl(192.168.2.21): string broadcast message was pushed from 1291400 to vehicle 1138272 (slaveControl 1)masterControl(192.168.2.21): vehicle 1333770 was added to slave control 1 or log 11:16:08,562 12104 INFO 11:16:08,562 masterControl(192.168.2.21): string broadcast message was pushed from 117772 to vehicle 1217744 (slaveControl 1) 12104 INFO masterControl(192.168.2.21): vehicle 1169775 was pushed to slave control 1 Edit 2: It seems like the problem only occurs if logging methods are called from inside a RMI thread (my client / server exchange information using RMI connections). ... Edit 3: I solved the problem by myself: It seems like log4j is NOT completely thread-save. After synchronizing all log / trace methods using a separate object everything is working fine. Maybe the lib is writing the messages to a thread-unsafe buffer before writing them to file?

    Read the article

  • Can't figure out this file behavior in IOS 4.2

    - by Don Jones
    Odd behavior with file behavior. Here's the thing: I'm using the phone camera to snap a picture, and internally generating a thumbnail. I'm saving those as temp files in the Documents directory. Here's the complete code: - (void)imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info { UIImage *photo = [info objectForKey:@"UIImagePickerControllerOriginalImage"]; photo = [self scaleAndRotateImage:photo]; // save photo NSString *docsDir = [NSHomeDirectory() stringByAppendingPathComponent:@"Documents"]; NSLog(@"Writing to %@",docsDir); // save photo file NSLog(@"Saving photo as %@",[NSString stringWithFormat:@"%@/temp_photo.png",docsDir]); [UIImagePNGRepresentation(photo) writeToFile:[NSString stringWithFormat:@"%@/temp_photo.png",docsDir] atomically:YES]; // make and save thumbnail NSLog(@"Saving thumbnail as %@",[NSString stringWithFormat:@"%@/temp_thumb.png",docsDir]); UIImage *thumb = [self makeThumbnail:photo]; [UIImagePNGRepresentation(thumb) writeToFile:[NSString stringWithFormat:@"%@/temp_thumb.png",docsDir] atomically:YES]; NSFileManager *manager = [NSFileManager defaultManager]; NSError *error; NSArray *files = [manager contentsOfDirectoryAtPath:docsDir error:&error]; NSLog(@"\n\nThere are %d files in the documents directory %@",(files.count),docsDir); for (int i = 0; i < files.count; i++) { NSString *filename = [files objectAtIndex:i]; NSLog(@"Seeing filename %@",filename); } // done //[photo release]; //[thumb release]; [self dismissModalViewControllerAnimated:NO]; [delegate textInputFinished]; } As you can see, I've put quite a bit of logging in here in an attempt to figure out my problem (which is coming up). The log output to this point is: Writing to /var/mobile/Applications/77D792DC-A224-4A47-8A4C-BB7C557626F3/Documents Saving photo as /var/mobile/Applications/77D792DC-A224-4A47-8A4C-BB7C557626F3/Documents/temp_photo.png Saving thumbnail as /var/mobile/Applications/77D792DC-A224-4A47-8A4C-BB7C557626F3/Documents/temp_thumb.png There are 3 files in the documents directory /var/mobile/Applications/77D792DC-A224-4A47-8A4C-BB7C557626F3/Documents Seeing filename temp_photo.png Seeing filename temp_text.txt Seeing filename temp_thumb.png This is absolutely as-expected. I clearly have three files on the device. Here's the very next code that operates - the code that received the textInputFinished message: - (void)textInputFinished { NSFileManager *fileManager = [NSFileManager defaultManager]; NSString *docsDir = [NSHomeDirectory() stringByAppendingPathComponent:@"Documents"]; NSError *error; // get next filename NSString *filename; int i = 0; do { i++; filename = [NSString stringWithFormat:@"%@/reminder_%d",docsDir,i]; NSLog(@"Trying filename %@",filename); } while ([fileManager fileExistsAtPath:[filename stringByAppendingString:@".txt"]]); NSLog(@"New base filename is %@",filename); NSArray *files = [fileManager contentsOfDirectoryAtPath:docsDir error:&error]; NSLog(@"There are %d files in the directory %@",(files.count),docsDir); This is testing to get a new, non-temp, not-in-use filename. It does that - but then it says there aren't any files in the documents folder! Here's the logged output: Trying filename /var/mobile/Applications/77D792DC-A224-4A47-8A4C-BB7C557626F3/Documents/reminder_1 New base filename is /var/mobile/Applications/77D792DC-A224-4A47-8A4C-BB7C557626F3/Documents/reminder_1 There are 0 files in the directory /var/mobile/Applications/77D792DC-A224-4A47-8A4C-BB7C557626F3/Documents What the heck? Where did the three files go?

    Read the article

  • Why Do I See the "In Recovery" Msg, and How Can I Prevent it?

    - by John Hansen
    The project I'm working on creates a local copy of the SQL Server database for each SVN branch you work on. We're running SQL Server 2008 Express with Advanced Services on our local machine to host it. When we create a new branch, the build script will create a new database with the ID of that branch, creates the schema objects, and copies over a selection of data from the production shadow server. After the database is created, it, or other databases on the local machine, will often go into "In Recovery" mode for several minutes. After several refreshes it comes up and is happy, but will occasionally go back into "In Recovery" mode. The database is created in simple recovery mode. The file names aren't specified, so it uses default paths for files. The size of the database after loading data is ~400 megs. It is running in SQL Server 2005 compatibility mode. The command that creates the database is: sqlcmd -S $(DBServer) -Q "IF NOT EXISTS (SELECT [name] FROM sysdatabases WHERE [name] = '$(DBName)') BEGIN CREATE DATABASE [$(DBName)]; print 'Created $(DBName)'; END" ...where $(DBName) and $(DBServer) are MSBuild parameters. I got a nice clean log file this morning. When I turned on my computer it starts all five databases. However, two of them show transactions being rolled forward and backwards. The it just keeps trying to start up all five of the databases. 2010-06-10 08:24:59.74 spid52 Starting up database 'ASPState'. 2010-06-10 08:24:59.82 spid52 Starting up database 'CommunityLibrary'. 2010-06-10 08:25:03.97 spid52 Starting up database 'DLG-R8441'. 2010-06-10 08:25:05.07 spid52 2 transactions rolled forward in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:05.14 spid52 0 transactions rolled back in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:05.14 spid52 Recovery is writing a checkpoint in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:11.23 spid52 Starting up database 'DLG-R8979'. 2010-06-10 08:25:12.31 spid36s Starting up database 'DLG-R8441'. 2010-06-10 08:25:13.17 spid52 2 transactions rolled forward in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:13.22 spid52 0 transactions rolled back in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:13.22 spid52 Recovery is writing a checkpoint in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:18.43 spid52 Starting up database 'Rls QA'. 2010-06-10 08:25:19.13 spid46s Starting up database 'DLG-R8979'. 2010-06-10 08:25:23.29 spid36s Starting up database 'DLG-R8441'. 2010-06-10 08:25:27.91 spid52 Starting up database 'ASPState'. 2010-06-10 08:25:29.80 spid41s Starting up database 'DLG-R8979'. 2010-06-10 08:25:31.22 spid52 Starting up database 'Rls QA'. In this case it kept trying to start the databases continuously until I shut down SQL Server at 08:48:19.72, 23 minutes later. Meanwhile, I actually am able to use the databases much of the time.

    Read the article

  • Use of select or multithread for almost 80 or more clients?

    - by Tushar Goel
    I am working on one project in which i need to read from 80 or more clients and then write their o/p into a file continuously and then read these new data for another task. My question is what should i use select or multithreading? Also I tried to use multi threading using read/fgets and write/fputs call but as they are blocking calls and one operation can be performed at one time so it is not feasible. Any idea is much appreciated. update 1: I have tried to implement the same using condition variable. I able to achieve this but it is writing and reading one at a time.When another client tried to write then it cannot able to write unless i quit from the 1st thread. I do not understand this. This should work now. What mistake i am doing? Update 2: Thanks all .. I am able to succeeded to get this model implemented using mutex condition variable. updated Code is as below: **header file******* char *mailbox ; pthread_mutex_t lock = PTHREAD_MUTEX_INITIALIZER ; pthread_cond_t writer = PTHREAD_COND_INITIALIZER; int main(int argc,char *argv[]) { pthread_t t1 , t2; pthread_attr_t attr; int fd, sock , *newfd; struct sockaddr_in cliaddr; socklen_t clilen; void *read_file(); void *update_file(); //making a server socket if((fd=make_server(atoi(argv[1])))==-1) oops("Unable to make server",1) //detaching threads pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr,PTHREAD_CREATE_DETACHED); ///opening thread for reading pthread_create(&t2,&attr,read_file,NULL); while(1) { clilen = sizeof(cliaddr); //accepting request sock=accept(fd,(struct sockaddr *)&cliaddr,&clilen); //error comparison against failire of request and INT if(sock==-1 && errno != EINTR) oops("accept",2) else if ( sock ==-1 && errno == EINTR) oops("Pressed INT",3) newfd = (int *)malloc(sizeof(int)); *newfd = sock; //creating thread per request pthread_create(&t1,&attr,update_file,(void *)newfd); } free(newfd); return 0; } void *read_file(void *m) { pthread_mutex_lock(&lock); while(1) { printf("Waiting for lock.\n"); pthread_cond_wait(&writer,&lock); printf("I am reading here.\n"); printf("%s",mailbox); mailbox = NULL ; pthread_cond_signal(&writer); } } void *update_file(int *m) { int sock = *m; int fs ; int nread; char buffer[BUFSIZ] ; if((fs=open("database.txt",O_RDWR))==-1) oops("Unable to open file",4) while(1) { pthread_mutex_lock(&lock); write(1,"Waiting to get writer lock.\n",29); if(mailbox != NULL) pthread_cond_wait(&writer,&lock); lseek(fs,0,SEEK_END); printf("Reading from socket.\n"); nread=read(sock,buffer,BUFSIZ); printf("Writing in file.\n"); write(fs,buffer,nread); mailbox = buffer ; pthread_cond_signal(&writer); pthread_mutex_unlock(&lock); } close(fs); }

    Read the article

  • SQLAuthority News – SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience

    - by pinaldave
    I recently attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever This year the summit was at its best. Instead of writing about my usual routine or the event, I am going to write about the interesting things I did and how I felt about it! Best Summit Ever Trip to Seattle! This was my second trip to Seattle this year and the journey is always long. Here is the travel stats on how long it takes to get to Seattle: 24 hours official air time 36 hours total travel time (connection waits and airport commute) Every time I travel to USA I gain a day and when I travel back to home, I lose a day. However, the total traveling time is around 3 days. The journey is long and very exhausting. However, it is all worth it when you’re attending an event like SQLPASS. Here are few things I carry when I travel for a long journey: Dry Snack packs – I like to have some good Indian Dry Snacks along with me in my backpack so I can have my own snack when I want Amazon Kindle – Loaded with 80+ books A physical book – This is usually a very easy to read book I do not watch movies on the plane and usually spend my time reading something quick and easy. If I can go to sleep, I go for it. I prefer to not to spend time in conversation with the guy sitting next to me because usually I end up listening to their biography, which I cannot blog about. Sheraton Seattle SQLPASS In any case, I love to go to Seattle as the city is great and has everything a brilliant metropolis has to offer. The new Light Train is extremely convenient, and I can take it directly from the airport to the city center. My hotel, the Sheraton, was only few meters (in the USA people count in blocks – 3 blocks) away from the train station. This time I saved USD 40 each round trip due to the Light Train. Sessions I attended! Well, I really wanted to attend most of the sessions but there was great dilemma of which ones to choose. There were many, many sessions to be attended and at any given time there was more than one good session being presented. I had decided to attend sessions in area performance tuning and I attended quite a few sessions this year, compared to what I was able to do last year. Here are few names of the speakers whose sessions I attended (please note, following great speakers are not listed in any order. I loved them and I enjoyed their sessions): Conor Cunningham Rushabh Mehta Buck Woody Brent Ozar Jonathan Kehayias Chris Leonard Bob Ward Grant Fritchey I had great fun attending their sessions. The sessions were meaningful and enlightening. It is hard to rate any session but I have found that the insights learned in Conor Cunningham’s sessions are the highlight of the PASS Summit. Rushabh Mehta at Keynote SQLPASS   Bucky Woody and Brent Ozar I always like the sessions where the speaker is much closer to the audience and has real world experience. I think speakers who have worked in the real world deliver the best content and most useful information. Sessions I did not like! Indeed there were few sessions I did not like it and I am not going to name them here. However, there were strong reasons I did not like their sessions, and here is why: Sessions were all theory and had no real world connections. All technical questions ended with confusing answers (lots of “I will get back to you on it,” “it depends,” “let us take this offline” and many more…) “I am God” kind of attitude in the speakers For example, I attended a session of one very well known speaker who is a specialist for one particular area. I was bit late for the session and was surprised to see that in a room that could hold 350 people there were only 30 attendees. After sitting there for 15 minutes, I realized why lots of people left. Very soon I found I preferred to stare out the window instead of listening to that particular speaker. One on One Talk! Many times people ask me what I really like about PASS. I always say the experience of meeting SQL legends and spending time with them one on one and LEARNING! Here is the quick list of the people I met during this event and spent more than 30 minutes with each of them talking about various subjects: Pinal Dave and Brad Shulz Pinal Dave and Rushabh Mehta Michael Coles and Pinal Dave Rushabh Mehta – It is always pleasure to meet with him. He is a man with lots of energy and a passion for community. He recently told me that he really wanted to turn PASS into resource for learning for every SQL Server Developer and Administrator in the world. I had great in-depth discussion regarding how a single person can contribute to a community. Michael Coles – I consider him my best friend. It is always fun to meet him. He is funny and very knowledgeable. I think there are very few people who are as expert as he is in encryption and spatial databases. Worth meeting him every single time. Glenn Berry – A real friend of everybody. He is very a simple person and very true to his heart. I think there is not a single person in whole community who does not like him. He is a friends of all and everybody likes him very much. I once again had time to sit with him and learn so much from him. As he is known as Dr. DMV, I can be his nurse in the area of DMV. Brad Schulz – I always wanted to meet him but never got chance until today. I had great time meeting him in person and we have spent considerable amount of time together discussing various T-SQL tricks and tips. I do not know where he comes up with all the different ideas but I enjoy reading his blog and sharing his wisdom with me. Jonathan Kehayias – He is drill sergeant in US army. If you get the impression that he is a giant with very strong personality – you are wrong. He is very kind and soft spoken DBA with strong performance tuning skills. I asked him how he has kept his two jobs separate and I got very good answer – just work hard and have passion for what you do. I attended his sessions and his presentation style is very unique.  I feel like he is speaking in a language I understand. Louis Davidson – I had never had a chance to sit with him and talk about technology before. He has so much wisdom and he is very kind. During the dinner, I had talked with him for long time and without hesitation he started to draw a schema for me on the menu. It was a wonderful experience to learn from a master at the dinner table. He explained to me the real and practical differences between third normal form and forth normal form. Honestly I did not know earlier, but now I do. Erland Sommarskog – This man needs no introduction, he is very well known and very clear in conveying his ideas. I learned a lot from him during the course of year. Every time I meet him, I learn something new and this time was no exception. Joe Webb – Joey is all about community and people, we had interesting conversation about community, MVP and how one can be helpful to community without losing passion for long time. It is always pleasant to talk to him and of course, I had fun time. Ross Mistry – I call him my brother many times because he indeed looks like my cousin. He provided me lots of insight of how one can write book and how he keeps his books simple to appeal to all the readers. A wonderful person and great friend. Ola Hallgren - I did not know he was coming to the summit. I had great time meeting him and had a wonderful conversation with him regarding his scripts and future community activities. Blythe Morrow – She used to be integrated part of SQL Server Community and PASS HQ. It was wonderful to meet her again and re-connect. She is wonderful person and I had a great time talking to her. Solid Quality Mentors – It is difficult to decide who to mention here. Instead of writing all the names, I am going to include a photo of our meeting. I had great fun meeting various members of our global branches. This year I was sitting with my Spanish speaking friends and had great fun as Javier Loria from Solid Quality translated lots of things for me. Party, Party and Parties Every evening there were various parties. I did attend almost all of them. Every party had different theme but the goal of all the parties the same – networking. Here are the few parties where I had lots of fun: Dell Reception Party Exhibitor Party Solid Quality Fun Party Red Gate Friends Party MVP Dinner Microsoft Party MVP Dinner Quest Party Gameworks PASS Party Volunteer Party at Garage Solid Quality Mentors (10 Members out of 120) They were all great networking opportunities and lots of fun. I really had great time meeting people at the various parties. There were few people everywhere – well, I will say I am among them – who hopped parties. NDA – Not Decided Agenda During the event there were few meetings marked “NDA.” Someone asked me “why are these things NDA?”  My response was simple: because they are not sure themselves. NDA stands for Not Decided Agenda. Toys, Giveaways and Luggage I admit, I was like child in Gameworks and was playing to win soft toys. I was doing it for my daughter. I must thank all of the people who gave me their cards to try my luck. I won 4 soft-toys for my daughter and it was fun. Also, thanks to Angel who did a final toy swap with me to get the desired toy for my daughter. I also collected ducks from Idera, as my daughter really loves them. Solid Quality Booth Each of the exhibitors was giving away something and I got so much stuff that my luggage got quite a bit bigger when I returned. Best Exhibitor Idera had SQLDoctor (a real magician and fun guy) to promote their new tool SQLDoctor. I really had a great time participating in the magic myself. At one point, the magician made my watch disappear.  I have seen better magic before, but this time it caught me unexpectedly and I was taken by surprise. I won many ducks again. The Common Question I heard the following common questions: I have seen you somewhere – who are you? – I am Pinal Dave. I did not know that Pinal is your first name and Dave is your last name, how do you pronounce your last name again? – Da-way How old are you? – I am as old as I can be. Are you an Indian because you look like one? – I did not answer this one. Where are you from? This question was usually asked after looking at my badge which says India. So did you really fly from India? – Yes, because I have seasickness so I do not prefer the sea journey. How long was the journey? – 24/36/12 (air travel time/total travel time/time zone difference) Why do you write on SQLAuthority.com? – Because I want to. I remember your daughter looks like you. – Is this even a question? Of course, she is daddy’s little girl. There were so many other questions, I will have to write another blog post about it. SQLPASS Again, Best Summit Ever! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: About Me, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology Tagged: SQLPASS

    Read the article

  • CodePlex Daily Summary for Monday, March 05, 2012

    CodePlex Daily Summary for Monday, March 05, 2012Popular ReleasesSimple Injector: Simple Injector v1.4.1: This release adds two small improvements to the SimpleInjector.Extensions.dll. No changes have been made to the core library. New features and improvements in this release for the SimpleInjector.Extensions.dll The RegisterManyForOpenGeneric extension methods now accept non-generic decorator, as long as they implement the given open generic service type. GetTypesToRegister methods added to the OpenGenericBatchRegistrationExtensions class which allows to customize the behavior. Note that the...SQL Scriptz Runner: Application: Scriptz Runner source code and applicationCommonLibrary: Code: CodePowerGUI Visual Studio Extension: PowerGUI VSX 1.5.2: Added support for PowerGUI 3.2.Path Copy Copy: 10.0: New version with the following biggest new features: Regular expression support in custom commands (see this work item) Import/export feature for custom commands (see this work item) This version also addresses the following work items: 11353 11348 This version is a recommended upgrade for all users. Note: new custom commands that user regular expressions won't be compatible with earlier versions (if installed by registry manipulation or via network installation), but everything else is ...VidCoder: 1.3.1: Updated HandBrake core to 0.9.6 release (svn 4472). Removed erroneous "None" container choice. Change some logic and help text to stop assuming you have to pick the VIDEO_TS folder for a DVD scan. This should make previewing DVD titles on the Queue Multiple Titles window possible when you've picked the root DVD directory.ASP.NET MVC Framework - Abstracting Data Annotations, HTML5, Knockout JS techs: Version 1.0: Please download the source code. I am not associating any dll for release.ExtAspNet: ExtAspNet v3.1.0: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-03-04 v3.1.0 -??Hidden???????(〓?〓)。 -?PageManager??...AcDown????? - Anime&Comic Downloader: AcDown????? v3.9.1: ?? ●AcDown??????????、??、??????,????1M,????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????,??????、????????????????。 ● AcDown???????????????????????????,???,???????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDo...Windows Phone Commands for VS2010: Version 1.0: Initial Release Version 1.0 Connect from device or emulator (Monitors the connection) Show Device information (Plataform, build , version, avaliable memory, total memory, architeture Manager installed applications (Launch, uninstall and explorer isolate storage files) Manager core applications (Launch blocked applications from emulator (Office, Calculator, alarm, calendar , etc) Manager blocked settings from emulator (Airplane Mode, Celullar Network, Wifi, etc) Deploy and update ap...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.01.00: Changes on Version 06.01.00 Fixed issue on GraySmallTitle container, that breaks the layout Fixed issue on Blue Metro7 Skin where the Search, Login, Register, Date is missing Fixed issue with the Version numbers on the target file Fixed issue where the jQuery and jQuery-UI files not deleted on upgrade from Version 01.00.00 Added a internal page where the Image Slider would be replaces with a BannerPaneMedia Companion: MC 3.433b Release: General More GUI tweaks (mostly imperceptible!) Updates for mc_com.exe TV The 'Watched' button has been re-instigated Added TV Menu sub-option to search ALL for new Episodes (includes locked shows) Movies Added 'Source' field (eg DVD, Bluray, HDTV), customisable in Advanced Preferences (try it out, let us know how it works!) Added HTML <<format>> tag with optional parameters for video container, source, and resolution (updated HTML tags to be added to Documentation shortly) Known Issu...Picturethrill: Version 2.3.2.0: Release includes Self-Update feature for Picturethrill. What that means for users is that they are always guaranteed to have a fresh copy of Picturethrill on their computers with all latest fixes. When Picturethrill adds a new website to get pictures from, you will get it too!Simple MVVM Toolkit for Silverlight, WPF and Windows Phone: Simple MVVM Toolkit v3.0.0.0: Added support for Silverlight 5.0 and Windows Phone 7.1. Upgraded project templates and samples. Upgraded installer. There are some new prerequisites required for this version, namely Silverlight 5 Tools, Expression Blend Preview for Silverlight 5 (until the SDK is released), Windows Phone 7.1 SDK. Because it is in the experimental band, I have also removed the dependency on the Silverlight Testing Framework. You can use it if you wish, but the Ria Services project template no longer uses ...CODE Framework: 4.0.20301: The latest version adds a number of new features to the WPF system (such as stylable and testable messagebox support) as well as various new features throughout the system (especially in the Utilities namespace).MyRouter (Virtual WiFi Router): MyRouter 1.0.2 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Orchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesNetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...New ProjectsAbsolute Risk Game: Risk Game is a classic "World Domination Risk" game where you try to conquer the world.Architecture Document Catalog: The Architecture Document Catalog is a catalog for various documentation used by software solution architects. The initial architecture framework supported is from Rozanski and Woods, also called Viewpoints and Perspectives. It's in C#, Silverlight, WCF RIA Services.Background Worker Job Execution & Job Scheduler: Background worker is a multi-threaded job execution and scheduling engine. Very similar to Quartz, but with a slightly different focus.BWOS: preparing a new operating system. and name BWOS. CommonLibrary: Common modules and componentesCustomizeTool: CustomizeToolData Foundry: Data Foundry is a Swiss army knife for database administrator. With capabilities to cross reference check data between tables to find orphaned data and table relations.Data Grid Extensions: Modular extensions for the DataGrid control. Attach filtering capabilities to your existing DataGrid.dk.Helper: dk.Helper makes it easier for tribal wars game players (divoke-kmene.sk) to manage common activities in game. It's developed in C#.ExEn: ExEn is a high-performance implementation of a subset of the XNA API that runs on Silverlight, iOS and Android.Extended Methods for .NET: Developed in VB.NET, this DLL includes some functions I came across over the internet. Originally they were functions. I made some changes to suit my work and recreated them as Extended methods. Currently includes two extended methods for the Image class and one extended method for the String class. I will update it with new methods as I go along.GestionarComenzi: Gestioneaza Comenzi - Firma transporturiGIS Library Management: GIS Library Management System.iFinity Cache Master for DotNetNuke: The iFinity DotNetNuke Cache Master is an Administration module for DotNetNuke. This module allows administrators to inspect the current contents of the ASP.NET Cache in their running DotNetNuke installation. A very useful tool for developers working with the DotNetNuke cache.intelliEssay Document Format Checker: This is a product that tries to check a document's format to see if it conforms to certain given standard.Just T[he]IP: "Just The IP" leverages the Bing API v2 and the ip: Bing Advanced Operator to list the other web sites hosted at this IP Address (that are indexed by Bing).KTool: Ktool is a tool for learning japanese kanji. This program is still in developed. Current version can only display and find a kanji word (Press ctrl-F on main screen for search). Developed in WPF, .NET 4.0Lab Checker: Lab Checker makes it easy for teacher to check students' programs. It allows a student to test his program on a set of test cases which eliminates the need to run the program manually.MeoBox Vera Control Plugin: This is my project for creating a plugin to control my MeoBox ( Scientific Atlanta ) using Vera ( www.micasaverde.com ) Should work with other TV2Client boxesNUnitTestHelper: NUnitTestHelper is a helper class for developing unit tests for C# applications with NUnit framework. This helper library provides set of classes and method which can be used for accomplishing faster unit test development for any kind of project. NUnitTestBase – Supports basic functionality for writing a unit test with NUnit framework. This base class provides built in support for mocking framework. This version provides support for Rhino mocking framework.OnlineExam: Common online examination system based on Asp.net MVC3 can used for knowledge test, I/Q test, college test or most other test project.Orchard Code Generation Extensions: Code Generation Extensions module for Orchard.OrchardTranstion_CN: Orchar?? OsAvatar: to next step showOwnTools: About my toolsPhone Finder App: PhoneFinder will be a Windows Phone platform app alternative for finding a lost or stolen phone. Our plan is to have additional functionality the Windows software does not include. It will be developed using ASP.NET MVC, SQL Server, C#, etc.PoshChat: PoshChat is a client/server chat program written in PowerShell. Supports multiple client connections to a single server to chat.Process Attachment And Secure Text: ProcessAttachmentAndSecureText is an Exchange Transport Agent DLL and associated ASPX page. It is used to 1) strip out attachments and send them to an upload portal, and 2) to strip out text from emails and send it to an upload portal. It is currently coded for Exchange 2010Resource Viewer - Visual Studio Extension: Simply put the “resource viewer extension” enables you to visually view your ResourceDictionary. To open it go to: View – Other Windows – Resource Viewer. When working with WPF/Silverlight you put your reusable resources in a common ResourceDictionary, those resources might be of type Style, SolidColorBrush, DrawingBrush, BitmapImage and more. The problems starts when you have that ResourceDictionary you have no way to see how your resources look like, making the work process (of both t...Scumm XNA: Scumm XNA is an engine that runs old school LucasArts graphical adventure games. It is written completely in C# and will run on PC, Xbox 360 and Windows phone. The code is inspired by ScummVM but this project is not a port, it is a complete rewrite in order to optimize the engine for the CLR. Of course, you will need to own the orinigal games in order to use it. Currently, I will focus my work on the great "Day of Tentacle" game specifically the CD version.SDX DataGrid: SDXDataGrid is a comprehensive data grid component for Microsoft .NET 3.5 web application developers. It is designed to ease the exhausting process of implementing the necessary code for sorting, navigation, grouping, searching and data editing in a data representation object.SQL Scriptz Runner: Features are : Drag And Drop script files Run a directory of script files Sql Script out put messages during execution Script passed or failed that are colored green and red (yellow for running) Stop on error option Open script on error option Run report with time taken for each uComponents Demo: A demo for the code of running uComponents in Umbraco siteUnixTable: UnixTable makes it easier to realize application to access database, with no code but only with visual instrument at runtime. You'll no longer have to write query or code to read table from database. It's developed in Visual Basic for .NET 4. VOA Player.NET: VOA Player is a lightweight windows client for listening VOA Special English. Because of GFW blocking it fetch RSS data via rss2proxy.appspot.com indirectly. User can view article page and listen MP3 stream. The project is a C# implementation of voaplayer.sinaapp.com.Windows Metafile Library: The library supports reading and writing WMF files. Source code is written in pure .NET from scratch following the Windows Metafile Format Specification.Windows Phone 7.1 + MicroFramework (a phone device as remote control): Windows Phone 7.1 + .Net MicroFramework (How use a windows phone device as remote control of a Fez Panda II/MicroFramework board). A windows phone device can be connected to a wifi network (for example a wifi router). If you have also a MicroFramework board connected to the wifi network; you can send some http rest commands from the windows phone device to the MicroFramework board. The microframework board, it must support the tcp/ip protocol through a connect shield. In this exaple it will...XBMC Cache Manager: A Windows Service to manage a shared XBMC MySQL database and shared cache folder.

    Read the article

  • ASP.NET and HTML5 Local Storage

    - by Stephen Walther
    My favorite feature of HTML5, hands-down, is HTML5 local storage (aka DOM storage). By taking advantage of HTML5 local storage, you can dramatically improve the performance of your data-driven ASP.NET applications by caching data in the browser persistently. Think of HTML5 local storage like browser cookies, but much better. Like cookies, local storage is persistent. When you add something to browser local storage, it remains there when the user returns to the website (possibly days or months later). Importantly, unlike the cookie storage limitation of 4KB, you can store up to 10 megabytes in HTML5 local storage. Because HTML5 local storage works with the latest versions of all modern browsers (IE, Firefox, Chrome, Safari), you can start taking advantage of this HTML5 feature in your applications right now. Why use HTML5 Local Storage? I use HTML5 Local Storage in the JavaScript Reference application: http://Superexpert.com/JavaScriptReference The JavaScript Reference application is an HTML5 app that provides an interactive reference for all of the syntax elements of JavaScript (You can read more about the application and download the source code for the application here). When you open the application for the first time, all of the entries are transferred from the server to the browser (all 300+ entries). All of the entries are stored in local storage. When you open the application in the future, only changes are transferred from the server to the browser. The benefit of this approach is that the application performs extremely fast. When you click the details link to view details on a particular entry, the entry details appear instantly because all of the entries are stored on the client machine. When you perform key-up searches, by typing in the filter textbox, matching entries are displayed very quickly because the entries are being filtered on the local machine. This approach can have a dramatic effect on the performance of any interactive data-driven web application. Interacting with data on the client is almost always faster than interacting with the same data on the server. Retrieving Data from the Server In the JavaScript Reference application, I use Microsoft WCF Data Services to expose data to the browser. WCF Data Services generates a REST interface for your data automatically. Here are the steps: Create your database tables in Microsoft SQL Server. For example, I created a database named ReferenceDB and a database table named Entities. Use the Entity Framework to generate your data model. For example, I used the Entity Framework to generate a class named ReferenceDBEntities and a class named Entities. Expose your data through WCF Data Services. I added a WCF Data Service to my project and modified the data service class to look like this:   using System.Data.Services; using System.Data.Services.Common; using System.Web; using JavaScriptReference.Models; namespace JavaScriptReference.Services { [System.ServiceModel.ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class EntryService : DataService<ReferenceDBEntities> { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { config.UseVerboseErrors = true; config.SetEntitySetAccessRule("*", EntitySetRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } // Define a change interceptor for the Products entity set. [ChangeInterceptor("Entries")] public void OnChangeEntries(Entry entry, UpdateOperations operations) { if (!HttpContext.Current.Request.IsAuthenticated) { throw new DataServiceException("Cannot update reference unless authenticated."); } } } }     The WCF data service is named EntryService. Notice that it derives from DataService<ReferenceEntitites>. Because it derives from DataService<ReferenceEntities>, the data service exposes the contents of the ReferenceEntitiesDB database. In the code above, I defined a ChangeInterceptor to prevent un-authenticated users from making changes to the database. Anyone can retrieve data through the service, but only authenticated users are allowed to make changes. After you expose data through a WCF Data Service, you can use jQuery to retrieve the data by performing an Ajax call. For example, I am using an Ajax call that looks something like this to retrieve the JavaScript entries from the EntryService.svc data service: $.ajax({ dataType: "json", url: “/Services/EntryService.svc/Entries”, success: function (result) { var data = callback(result["d"]); } });     Notice that you must unwrap the data using result[“d”]. After you unwrap the data, you have a JavaScript array of the entries. I’m transferring all 300+ entries from the server to the client when the application is opened for the first time. In other words, I transfer the entire database from the server to the client, once and only once, when the application is opened for the first time. The data is transferred using JSON. Here is a fragment: { "d" : [ { "__metadata": { "uri": "http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries(1)", "type": "ReferenceDBModel.Entry" }, "Id": 1, "Name": "Global", "Browsers": "ff3_6,ie8,ie9,c8,sf5,es3,es5", "Syntax": "object", "ShortDescription": "Contains global variables and functions", "FullDescription": "<p>\nThe Global object is determined by the host environment. In web browsers, the Global object is the same as the windows object.\n</p>\n<p>\nYou can use the keyword <code>this</code> to refer to the Global object when in the global context (outside of any function).\n</p>\n<p>\nThe Global object holds all global variables and functions. For example, the following code demonstrates that the global <code>movieTitle</code> variable refers to the same thing as <code>window.movieTitle</code> and <code>this.movieTitle</code>.\n</p>\n<pre>\nvar movieTitle = \"Star Wars\";\nconsole.log(movieTitle === this.movieTitle); // true\nconsole.log(movieTitle === window.movieTitle); // true\n</pre>\n", "LastUpdated": "634298578273756641", "IsDeleted": false, "OwnerId": null }, { "__metadata": { "uri": "http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries(2)", "type": "ReferenceDBModel.Entry" }, "Id": 2, "Name": "eval(string)", "Browsers": "ff3_6,ie8,ie9,c8,sf5,es3,es5", "Syntax": "function", "ShortDescription": "Evaluates and executes JavaScript code dynamically", "FullDescription": "<p>\nThe following code evaluates and executes the string \"3+5\" at runtime.\n</p>\n<pre>\nvar result = eval(\"3+5\");\nconsole.log(result); // returns 8\n</pre>\n<p>\nYou can rewrite the code above like this:\n</p>\n<pre>\nvar result;\neval(\"result = 3+5\");\nconsole.log(result);\n</pre>", "LastUpdated": "634298580913817644", "IsDeleted": false, "OwnerId": 1 } … ]} I worried about the amount of time that it would take to transfer the records. According to Google Chome, it takes about 5 seconds to retrieve all 300+ records on a broadband connection over the Internet. 5 seconds is a small price to pay to avoid performing any server fetches of the data in the future. And here are the estimated times using different types of connections using Fiddler: Notice that using a modem, it takes 33 seconds to download the database. 33 seconds is a significant chunk of time. So, I would not use the approach of transferring the entire database up front if you expect a significant portion of your website audience to connect to your website with a modem. Adding Data to HTML5 Local Storage After the JavaScript entries are retrieved from the server, the entries are stored in HTML5 local storage. Here’s the reference documentation for HTML5 storage for Internet Explorer: http://msdn.microsoft.com/en-us/library/cc197062(VS.85).aspx You access local storage by accessing the windows.localStorage object in JavaScript. This object contains key/value pairs. For example, you can use the following JavaScript code to add a new item to local storage: <script type="text/javascript"> window.localStorage.setItem("message", "Hello World!"); </script>   You can use the Google Chrome Storage tab in the Developer Tools (hit CTRL-SHIFT I in Chrome) to view items added to local storage: After you add an item to local storage, you can read it at any time in the future by using the window.localStorage.getItem() method: <script type="text/javascript"> window.localStorage.setItem("message", "Hello World!"); </script>   You only can add strings to local storage and not JavaScript objects such as arrays. Therefore, before adding a JavaScript object to local storage, you need to convert it into a JSON string. In the JavaScript Reference application, I use a wrapper around local storage that looks something like this: function Storage() { this.get = function (name) { return JSON.parse(window.localStorage.getItem(name)); }; this.set = function (name, value) { window.localStorage.setItem(name, JSON.stringify(value)); }; this.clear = function () { window.localStorage.clear(); }; }   If you use the wrapper above, then you can add arbitrary JavaScript objects to local storage like this: var store = new Storage(); // Add array to storage var products = [ {name:"Fish", price:2.33}, {name:"Bacon", price:1.33} ]; store.set("products", products); // Retrieve items from storage var products = store.get("products");   Modern browsers support the JSON object natively. If you need the script above to work with older browsers then you should download the JSON2.js library from: https://github.com/douglascrockford/JSON-js The JSON2 library will use the native JSON object if a browser already supports JSON. Merging Server Changes with Browser Local Storage When you first open the JavaScript Reference application, the entire database of JavaScript entries is transferred from the server to the browser. Two items are added to local storage: entries and entriesLastUpdated. The first item contains the entire entries database (a big JSON string of entries). The second item, a timestamp, represents the version of the entries. Whenever you open the JavaScript Reference in the future, the entriesLastUpdated timestamp is passed to the server. Only records that have been deleted, updated, or added since entriesLastUpdated are transferred to the browser. The OData query to get the latest updates looks like this: http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries?$filter=(LastUpdated%20gt%20634301199890494792L) If you remove URL encoding, the query looks like this: http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries?$filter=(LastUpdated gt 634301199890494792L) This query returns only those entries where the value of LastUpdated > 634301199890494792 (the version timestamp). The changes – new JavaScript entries, deleted entries, and updated entries – are merged with the existing entries in local storage. The JavaScript code for performing the merge is contained in the EntriesHelper.js file. The merge() method looks like this:   merge: function (oldEntries, newEntries) { // concat (this performs the add) oldEntries = oldEntries || []; var mergedEntries = oldEntries.concat(newEntries); // sort this.sortByIdThenLastUpdated(mergedEntries); // prune duplicates (this performs the update) mergedEntries = this.pruneDuplicates(mergedEntries); // delete mergedEntries = this.removeIsDeleted(mergedEntries); // Sort this.sortByName(mergedEntries); return mergedEntries; },   The contents of local storage are then updated with the merged entries. I spent several hours writing the merge() method (much longer than I expected). I found two resources to be extremely useful. First, I wrote extensive unit tests for the merge() method. I wrote the unit tests using server-side JavaScript. I describe this approach to writing unit tests in this blog entry. The unit tests are included in the JavaScript Reference source code. Second, I found the following blog entry to be super useful (thanks Nick!): http://nicksnettravels.builttoroam.com/post/2010/08/03/OData-Synchronization-with-WCF-Data-Services.aspx One big challenge that I encountered involved timestamps. I originally tried to store an actual UTC time as the value of the entriesLastUpdated item. I quickly discovered that trying to work with dates in JSON turned out to be a big can of worms that I did not want to open. Next, I tried to use a SQL timestamp column. However, I learned that OData cannot handle the timestamp data type when doing a filter query. Therefore, I ended up using a bigint column in SQL and manually creating the value when a record is updated. I overrode the SaveChanges() method to look something like this: public override int SaveChanges(SaveOptions options) { var changes = this.ObjectStateManager.GetObjectStateEntries( EntityState.Modified | EntityState.Added | EntityState.Deleted); foreach (var change in changes) { var entity = change.Entity as IEntityTracking; if (entity != null) { entity.LastUpdated = DateTime.Now.Ticks; } } return base.SaveChanges(options); }   Notice that I assign Date.Now.Ticks to the entity.LastUpdated property whenever an entry is modified, added, or deleted. Summary After building the JavaScript Reference application, I am convinced that HTML5 local storage can have a dramatic impact on the performance of any data-driven web application. If you are building a web application that involves extensive interaction with data then I recommend that you take advantage of this new feature included in the HTML5 standard.

    Read the article

  • Code Contracts: Unit testing contracted code

    - by DigiMortal
    Code contracts and unit tests are not replacements for each other. They both have different purpose and different nature. It does not matter if you are using code contracts or not – you still have to write tests for your code. In this posting I will show you how to unit test code with contracts. In my previous posting about code contracts I showed how to avoid ContractExceptions that are defined in code contracts runtime and that are not accessible for us in design time. This was one step further to make my randomizer testable. In this posting I will complete the mission. Problems with current code This is my current code. public class Randomizer {     public static int GetRandomFromRangeContracted(int min, int max)     {         Contract.Requires<ArgumentOutOfRangeException>(             min < max,             "Min must be less than max"         );           Contract.Ensures(             Contract.Result<int>() >= min &&             Contract.Result<int>() <= max,             "Return value is out of range"         );           var rnd = new Random();         return rnd.Next(min, max);     } } As you can see this code has some problems: randomizer class is static and cannot be instantiated. We cannot move this class between components if we need to, GetRandomFromRangeContracted() is not fully testable because we cannot currently affect random number generator output and therefore we cannot test post-contract. Now let’s solve these problems. Making randomizer testable As a first thing I made Randomizer to be class that must be instantiated. This is simple thing to do. Now let’s solve the problem with Random class. To make Randomizer testable I define IRandomGenerator interface and RandomGenerator class. The public constructor of Randomizer accepts IRandomGenerator as argument. public interface IRandomGenerator {     int Next(int min, int max); }   public class RandomGenerator : IRandomGenerator {     private Random _random = new Random();       public int Next(int min, int max)     {         return _random.Next(min, max);     } } And here is our Randomizer after total make-over. public class Randomizer {     private IRandomGenerator _generator;       private Randomizer()     {         _generator = new RandomGenerator();     }       public Randomizer(IRandomGenerator generator)     {         _generator = generator;     }       public int GetRandomFromRangeContracted(int min, int max)     {         Contract.Requires<ArgumentOutOfRangeException>(             min < max,             "Min must be less than max"         );           Contract.Ensures(             Contract.Result<int>() >= min &&             Contract.Result<int>() <= max,             "Return value is out of range"         );           return _generator.Next(min, max);     } } It seems to be inconvenient to instantiate Randomizer now but you can always use DI/IoC containers and break compiled dependencies between the components of your system. Writing tests for randomizer IRandomGenerator solved problem with testing post-condition. Now it is time to write tests for Randomizer class. Writing tests for contracted code is not easy. The main problem is still ContractException that we are not able to access. Still it is the main exception we get as soon as contracts fail. Although pre-conditions are able to throw exceptions with type we want we cannot do much when post-conditions will fail. We have to use Contract.ContractFailed event and this event is called for every contract failure. This way we find ourselves in situation where supporting well input interface makes it impossible to support output interface well and vice versa. ContractFailed is nasty hack and it works pretty weird way. Although documentation sais that ContractFailed is good choice for testing contracts it is still pretty painful. As a last chance I got tests working almost normally when I wrapped them up. Can you remember similar solution from the times of Visual Studio 2008 unit tests? Cannot understand how Microsoft was able to mess up testing again. [TestClass] public class RandomizerTest {     private Mock<IRandomGenerator> _randomMock;     private Randomizer _randomizer;     private string _lastContractError;       public TestContext TestContext { get; set; }       public RandomizerTest()     {         Contract.ContractFailed += (sender, e) =>         {             e.SetHandled();             e.SetUnwind();               throw new Exception(e.FailureKind + ": " + e.Message);         };     }       [TestInitialize()]     public void RandomizerTestInitialize()     {         _randomMock = new Mock<IRandomGenerator>();         _randomizer = new Randomizer(_randomMock.Object);         _lastContractError = string.Empty;     }       #region InputInterfaceTests     [TestMethod]     [ExpectedException(typeof(Exception))]     public void GetRandomFromRangeContracted_should_throw_exception_when_min_is_not_less_than_max()     {         try         {             _randomizer.GetRandomFromRangeContracted(100, 10);         }         catch (Exception ex)         {             throw new Exception(string.Empty, ex);         }     }       [TestMethod]     [ExpectedException(typeof(Exception))]     public void GetRandomFromRangeContracted_should_throw_exception_when_min_is_equal_to_max()     {         try         {             _randomizer.GetRandomFromRangeContracted(10, 10);         }         catch (Exception ex)         {             throw new Exception(string.Empty, ex);         }     }       [TestMethod]     public void GetRandomFromRangeContracted_should_work_when_min_is_less_than_max()     {         int minValue = 10;         int maxValue = 100;         int returnValue = 50;           _randomMock.Setup(r => r.Next(minValue, maxValue))             .Returns(returnValue)             .Verifiable();           var result = _randomizer.GetRandomFromRangeContracted(minValue, maxValue);           _randomMock.Verify();         Assert.AreEqual<int>(returnValue, result);     }     #endregion       #region OutputInterfaceTests     [TestMethod]     [ExpectedException(typeof(Exception))]     public void GetRandomFromRangeContracted_should_throw_exception_when_return_value_is_less_than_min()     {         int minValue = 10;         int maxValue = 100;         int returnValue = 7;           _randomMock.Setup(r => r.Next(10, 100))             .Returns(returnValue)             .Verifiable();           try         {             _randomizer.GetRandomFromRangeContracted(minValue, maxValue);         }         catch (Exception ex)         {             throw new Exception(string.Empty, ex);         }           _randomMock.Verify();     }       [TestMethod]     [ExpectedException(typeof(Exception))]     public void GetRandomFromRangeContracted_should_throw_exception_when_return_value_is_more_than_max()     {         int minValue = 10;         int maxValue = 100;         int returnValue = 102;           _randomMock.Setup(r => r.Next(10, 100))             .Returns(returnValue)             .Verifiable();           try         {             _randomizer.GetRandomFromRangeContracted(minValue, maxValue);         }         catch (Exception ex)         {             throw new Exception(string.Empty, ex);         }           _randomMock.Verify();     }     #endregion        } Although these tests are pretty awful and contain hacks we are at least able now to make sure that our code works as expected. Here is the test list after running these tests. Conclusion Code contracts are very new stuff in Visual Studio world and as young technology it has some problems – like all other new bits and bytes in the world. As you saw then making our contracted code testable is easy only to the point when pre-conditions are considered. When we start dealing with post-conditions we will end up with hacked tests. I hope that future versions of code contracts will solve error handling issues the way that testing of contracted code will be easier than it is right now.

    Read the article

  • From Bluehost to WP Engine, My WordPress Story

    - by thatjeffsmith
    This is probably the longest blog post I’ve written in a LONG time. And if you’re used to coming here for the Oracle stuff, this post is not about that. It’s about my blog, and the stuff under the hood that makes it run, AKA WordPress. If you want to skip to the juicy stuff, then use these shortcuts: My Site Slowed Down How I Moved to WP Engine How WP Engine ‘Hooked’ Me Why WP Engine? I started thatJeffSmith.com on May 28th, 2010. I had been already been blogging for several years, but a couple of really smart people I respected (Andy, Brent – thanks again!) suggested that I take ownership of my content and begin building my personal brand. I thought that was a good idea, and so I signed up for service with bluehost. Bluehost makes setting up a WordPress site very, very easy. And, they continued to be easy to work with for the past 2 years. I would even recommend them to anyone looking to host their own WordPress install/site. For $83.40, I purchased a year’s worth of service and my domain name registration – a very good value. And then last year I paid $107.40 for another year’s services. And when that year expired I paid another $190.80 for an additional two year’s service in advance. I had been up to that point, getting my money’s worth. And then, just a few weeks ago… My Site Slowed to a Crawl That spike was from an April Fool's Day Post, I think Why? Well, when I first started blogging, I had the same problem that most beginner bloggers have – not many readers. In my first year of blogging, I think the highest number of readers on a single day was about 125. I remember that day as I was very excited to break 100! Bluehost was very reliable, serving up my content with maybe a total of 3-4 outages in the past 2 years. Support was usually very prompt with answers and solutions, and I love their ‘Chat now’ technology – much nicer than message boards only or pay-to-talk phone support. In the past 6 months however, I noticed a couple of things: daily traffic was increasing – woohoo! my service was experiencing severe CPU throttling – doh! To be honest, I wasn’t aware the throttling was occuring, but I did know that the response time of my blog was starting to lag. Average load times were approaching 20-30 seconds. Not good when good sites are loading in 5 seconds or less. And just this past week, in getting ready to launch a new website for work that sucked in an RSS feed from my blog, the new page was left waiting for more than a minute. Not good! In fact my boss asked, why aren’t you blogging on Blogger? Ugh. I tried a few things to fix the problem: I paid for a premium WordPress theme – Themify’s Grido (thanks to @SQLRockstar for the heads-up) I installed a couple of WP caching plugins I read every WP optimization blog post I could get my greedy little eyes on However, at the same time I was also getting addicted to WordPress bloggers talking about all the cool things you could do with your blog. As a result I had at one point about 30 different plugins installed. WordPress runs on MySQL, and certain queries running via these plugins were starving for CPU. Plugins that would be called every page load meant that as more people clicked on my site, the more CPU I needed. I’m not stupid, so I eventually figured out that maybe less plugins was better, and was able to go down to just 20. But still, the site was running like a dog. CPU Throttling, makes MySQL wait to run a query Bluehost runs shared servers. Your site runs on the same box that several hundred (or thousand?) other services are running on. If you take more CPU than they think you should have, they will limit your service by making you stand in line for CPU, AKA ‘throttling.’ This is not bad. This business model allows them to serve many, many users for a very fair price. It works great until, well, until it doesn’t. I noticed in the last week that for every minute of service, I was being throttled between 60 and 300 seconds. If there were 5 MySQL processes running, then every single one of them were being held in check. The blog visitor notice this as their page requests would take a minute or more to be answered. Bluehost unfortunately doesn’t offer dedicated server hosting, so there was no real upgrade path for me follow and remain one of their customers. So what was I to do? Uninstall every plugin and hope the site sped up? Ask for people to take turns on my blog? I decided to spend my way out of the problem. I signed up for service with WP Engine and moved ThatJeffSmith.com The first 2 months are free, and after that it’s about $29/month to run my site on their system. My math tells me that’s a good bit more expensive than what Bluehost was charging me – to the tune of about 300% more a month. Oh, and I should just say that my blog is a personal blog even though I talk about work stuff here. I don’t get paid for blogging, I don’t sell ads, and I don’t expense the service fees – this is my personal passion. So is it worth it? In the first 4 days, it seems to be totally worth it. Load times have gone from 20-30 seconds to less than 5 seconds. A few folks have told me via Twitter that they notice faster page loads. I anticipate this will indirectly lead to more traffic as Google penalizes you in search results if your site is too slow, and of course some folks won’t even bother waiting more than 5-10 seconds. I noticed right away that writing posts, uploading pictures, and just using the WordPress dashboard in general was much more responsive. So writing is less of a chore now, which means I won’t have a good reason not to write How I Moved to WP Engine I signed up for the service and registered my domain. I then took a full export of my ‘old’ site by doing a FTP GET of all my files, then did a MySQL database backup, exported my WordPress Theme settings to a .zip file, and then finally used the WordPress ‘Export’ feature. I then used the WordPress ‘Import’ on the new site to load up my posts. Then I uploaded the theme .zip package from Themify. Then I FTP’d the ‘wp-content’ directory up to my new server using SFTP (WP Engine only supports secure FTP – good on them!) Using a temporary URL to see my new site, I was able to confirm that everything looked mostly OK – I’ll detail the challenges and issues of fixing the content next – but then it was time to ‘flip the switch.’ I updated the IP address that the DNS lookup tables use to route traffic to my new server. In a matter of minutes the DNS servers around the world were updated and it was time to see the new site! But It Was ‘Broken’ I had never moved a website before, and in my rush to update the DNS, I had changed the records without really finding out what I was supposed to do first. After re-reading the directions provided by WP Engine and following the guidance of their support engineer, I realized I had needed to set the CNAME (Alias) ‘www’ record to point to a different URL than the ‘www.thatjeffsmith.com’ entry I had set. Once corrected the site was up and running in less than a minute. Then It Was Only Mostly Broken Many of my plugins weren’t working. Apparently just ftp’ing the wp-content directory up wasn’t the proper way to re-install the plugin. I suspect file permissions or file ownership wasn’t proper. Some plug-ins were working, many had their settings wiped to the defaults, and a few just didn’t work again. I had to delete the directory of the plug-in manually via SFTP, and then use the WP Dashboard to install it from scratch. And here was my first ‘lesson’ – don’t switch the DNS records until you’ve completely tested your new site. I wasn’t able to navigate the old WP console to review my plug-in settings. Thankfully I was able to use the Wayback Machine to reverse engineer some things, and of course most plug-ins aren’t that complicated to setup to begin with. An example of one that I had to redo from scratch is the ‘Twitter @Anywhere Plus’ plugin that I use to create the form that allows folks to tweet a post they enjoyed at the end of each story. How WP Engine ‘Hooked’ Me I actually signed up with another provider first. They ranked highly in Google searches and a few Tweeps recommended them to me. But hours after signing up and I still didn’t have sever reyady, I was ready to give up on them. They offered no chat or phone support – only mail and message boards. And the message boards were rife with posts about how the service had gone downhill in the past 6 months. To their credit, they did make it easy to cancel, although I did have to do so via email as their website ‘cancel’ button was non-existent. Within minutes of activating my WP Engine account I had received my welcome message and directions on how to get started. I was able to see my staged website right away. They also did something very cool before I even got started – they looked at my existing site and told me by how much they could improve its performance. The proof is in the web pudding. I like this for a few reasons, but primarily I liked their business model. It told me they knew what they were doing, and that they were willing to put their money where their mouth was. This was further evident by their 60-day money back guarantee. And if I understand it correctly, they don’t even take your money until after that 60 day period is over. After a day, I was welcomed by the WP Engine social media team, and was given the opportunity to subscribe to their newsletter and follow their account on Twitter. I noticed their Twitter team is sure to post regular WordPress tips several times a day. It’s not just an account that’s setup for the sake of having a Twitter presence. These little things add up and give me confidence in my decision to choose them as my hosting partner. ‘Partner’ – that’s a lot nicer word than just ‘service provider,’ isn’t it? Oh, and they offered me a t-shirt. Don’t ever doubt the power of a ‘free’ t-shirt! How awesome is this e-mail, from a customer perspective? I wasn’t really expecting any of this. Exceeding expectations before I have even handed over a single dollar seems like a pretty good business plan. This is how you treat customers. Love them to death, and they reward you with loyalty. But Jeff, You Skipped a Piece Here, Why WP Engine? I found them on one of those ‘Top 10′ list posts, and pulled up their webpage. I noticed they offered a specialized service – they host WordPress installs, and that’s it. Their servers are tuned specifically for running WordPress. They had in bolded text, things like ‘INSANELY FAST. INFINITELY SCALABLE.’ and ‘LIGHTNING SPEED.’ And then they offered insurance against hackers and they took care of automatic backups and restores. The only drawbacks I have noticed so far relate to plugins I used that have been ‘blacklisted.’ In order to guarantee that ‘lightning’ speed, they have banned the use of the CPU-suckiest plugins. One of those is the ‘Related Posts’ plugin. So if you are a subscriber and are reading this in your email, you’ll notice there’s no links back to my blog to continue reading other related stories. Since that referral traffic is very small single-digit for my site, I decided that I’m OK with that. I’d rather have the warp-speed page loads. Again, I think that will lead to higher traffic down the road. In 50+ days I will need to decide if WP Engine is a permanent solution. I’ll be sure to update this post when that time comes and let y’all know how it turns out.

    Read the article

  • Generating EF Code First model classes from an existing database

    - by Jon Galloway
    Entity Framework Code First is a lightweight way to "turn on" data access for a simple CLR class. As the name implies, the intended use is that you're writing the code first and thinking about the database later. However, I really like the Entity Framework Code First works, and I want to use it in existing projects and projects with pre-existing databases. For example, MVC Music Store comes with a SQL Express database that's pre-loaded with a catalog of music (including genres, artists, and songs), and while it may eventually make sense to load that seed data from a different source, for the MVC 3 release we wanted to keep using the existing database. While I'm not getting the full benefit of Code First - writing code which drives the database schema - I can still benefit from the simplicity of the lightweight code approach. Scott Guthrie blogged about how to use entity framework with an existing database, looking at how you can override the Entity Framework Code First conventions so that it can work with a database which was created following other conventions. That gives you the information you need to create the model classes manually. However, it turns out that with Entity Framework 4 CTP 5, there's a way to generate the model classes from the database schema. Once the grunt work is done, of course, you can go in and modify the model classes as you'd like, but you can save the time and frustration of figuring out things like mapping SQL database types to .NET types. Note that this template requires Entity Framework 4 CTP 5 or later. You can install EF 4 CTP 5 here. Step One: Generate an EF Model from your existing database The code generation system in Entity Framework works from a model. You can add a model to your existing project and delete it when you're done, but I think it's simpler to just spin up a separate project to generate the model classes. When you're done, you can delete the project without affecting your application, or you may choose to keep it around in case you have other database schema updates which require model changes. I chose to add the Model classes to the Models folder of a new MVC 3 application. Right-click the folder and select "Add / New Item..."   Next, select ADO.NET Entity Data Model from the Data Templates list, and name it whatever you want (the name is unimportant).   Next, select "Generate from database." This is important - it's what kicks off the next few steps, which read your database's schema.   Now it's time to point the Entity Data Model Wizard at your existing database. I'll assume you know how to find your database - if not, I covered that a bit in the MVC Music Store tutorial section on Models and Data. Select your database, uncheck the "Save entity connection settings in Web.config" (since we won't be using them within the application), and click Next.   Now you can select the database objects you'd like modeled. I just selected all tables and clicked Finish.   And there's your model. If you want, you can make additional changes here before going on to generate the code.   Step Two: Add the DbContext Generator Like most code generation systems in Visual Studio lately, Entity Framework uses T4 templates which allow for some control over how the code is generated. K Scott Allen wrote a detailed article on T4 Templates and the Entity Framework on MSDN recently, if you'd like to know more. Fortunately for us, there's already a template that does just what we need without any customization. Right-click a blank space in the Entity Framework model surface and select "Add Code Generation Item..." Select the Code groupt in the Installed Templates section and pick the ADO.NET DbContext Generator. If you don't see this listed, make sure you've got EF 4 CTP 5 installed and that you're looking at the Code templates group. Note that the DbContext Generator template is similar to the EF POCO template which came out last year, but with "fix up" code (unnecessary in EF Code First) removed.   As soon as you do this, you'll two terrifying Security Warnings - unless you click the "Do not show this message again" checkbox the first time. It will also be displayed (twice) every time you rebuild the project, so I checked the box and no immediate harm befell my computer (fingers crossed!).   Here's the payoff: two templates (filenames ending with .tt) have been added to the project, and they've generated the code I needed.   The "MusicStoreEntities.Context.tt" template built a DbContext class which holds the entity collections, and the "MusicStoreEntities.tt" template build a separate class for each table I selected earlier. We'll customize them in the next step. I recommend copying all the generated .cs files into your application at this point, since accidentally rebuilding the generation project will overwrite your changes if you leave them there. Step Three: Modify and use your POCO entity classes Note: I made a bunch of tweaks to my POCO classes after they were generated. You don't have to do any of this, but I think it's important that you can - they're your classes, and EF Code First respects that. Modify them as you need for your application, or don't. The Context class derives from DbContext, which is what turns on the EF Code First features. It holds a DbSet for each entity. Think of DbSet as a simple List, but with Entity Framework features turned on.   //------------------------------------------------------------------------------ // <auto-generated> // This code was generated from a template. // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace EF_CodeFirst_From_Existing_Database.Models { using System; using System.Data.Entity; public partial class Entities : DbContext { public Entities() : base("name=Entities") { } public DbSet<Album> Albums { get; set; } public DbSet<Artist> Artists { get; set; } public DbSet<Cart> Carts { get; set; } public DbSet<Genre> Genres { get; set; } public DbSet<OrderDetail> OrderDetails { get; set; } public DbSet<Order> Orders { get; set; } } } It's a pretty lightweight class as generated, so I just took out the comments, set the namespace, removed the constructor, and formatted it a bit. Done. If I wanted, though, I could have added or removed DbSets, overridden conventions, etc. using System.Data.Entity; namespace MvcMusicStore.Models { public class MusicStoreEntities : DbContext { public DbSet Albums { get; set; } public DbSet Genres { get; set; } public DbSet Artists { get; set; } public DbSet Carts { get; set; } public DbSet Orders { get; set; } public DbSet OrderDetails { get; set; } } } Next, it's time to look at the individual classes. Some of mine were pretty simple - for the Cart class, I just need to remove the header and clean up the namespace. //------------------------------------------------------------------------------ // // This code was generated from a template. // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // //------------------------------------------------------------------------------ namespace EF_CodeFirst_From_Existing_Database.Models { using System; using System.Collections.Generic; public partial class Cart { // Primitive properties public int RecordId { get; set; } public string CartId { get; set; } public int AlbumId { get; set; } public int Count { get; set; } public System.DateTime DateCreated { get; set; } // Navigation properties public virtual Album Album { get; set; } } } I did a bit more customization on the Album class. Here's what was generated: //------------------------------------------------------------------------------ // // This code was generated from a template. // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // //------------------------------------------------------------------------------ namespace EF_CodeFirst_From_Existing_Database.Models { using System; using System.Collections.Generic; public partial class Album { public Album() { this.Carts = new HashSet(); this.OrderDetails = new HashSet(); } // Primitive properties public int AlbumId { get; set; } public int GenreId { get; set; } public int ArtistId { get; set; } public string Title { get; set; } public decimal Price { get; set; } public string AlbumArtUrl { get; set; } // Navigation properties public virtual Artist Artist { get; set; } public virtual Genre Genre { get; set; } public virtual ICollection Carts { get; set; } public virtual ICollection OrderDetails { get; set; } } } I removed the header, changed the namespace, and removed some of the navigation properties. One nice thing about EF Code First is that you don't have to have a property for each database column or foreign key. In the Music Store sample, for instance, we build the app up using code first and start with just a few columns, adding in fields and navigation properties as the application needs them. EF Code First handles the columsn we've told it about and doesn't complain about the others. Here's the basic class: using System.ComponentModel; using System.ComponentModel.DataAnnotations; using System.Web.Mvc; using System.Collections.Generic; namespace MvcMusicStore.Models { public class Album { public int AlbumId { get; set; } public int GenreId { get; set; } public int ArtistId { get; set; } public string Title { get; set; } public decimal Price { get; set; } public string AlbumArtUrl { get; set; } public virtual Genre Genre { get; set; } public virtual Artist Artist { get; set; } public virtual List OrderDetails { get; set; } } } It's my class, not Entity Framework's, so I'm free to do what I want with it. I added a bunch of MVC 3 annotations for scaffolding and validation support, as shown below: using System.ComponentModel; using System.ComponentModel.DataAnnotations; using System.Web.Mvc; using System.Collections.Generic; namespace MvcMusicStore.Models { [Bind(Exclude = "AlbumId")] public class Album { [ScaffoldColumn(false)] public int AlbumId { get; set; } [DisplayName("Genre")] public int GenreId { get; set; } [DisplayName("Artist")] public int ArtistId { get; set; } [Required(ErrorMessage = "An Album Title is required")] [StringLength(160)] public string Title { get; set; } [Required(ErrorMessage = "Price is required")] [Range(0.01, 100.00, ErrorMessage = "Price must be between 0.01 and 100.00")] public decimal Price { get; set; } [DisplayName("Album Art URL")] [StringLength(1024)] public string AlbumArtUrl { get; set; } public virtual Genre Genre { get; set; } public virtual Artist Artist { get; set; } public virtual List<OrderDetail> OrderDetails { get; set; } } } The end result was that I had working EF Code First model code for the finished application. You can follow along through the tutorial to see how I built up to the finished model classes, starting with simple 2-3 property classes and building up to the full working schema. Thanks to Diego Vega (on the Entity Framework team) for pointing me to the DbContext template.

    Read the article

  • Prepping a conference

    - by Laurent Bugnion
    I have had the chance to talk at many conferences these past few years, and came up with a way to prepare them which works really well for me. Most importantly, it would make it quite easy to overcome an emergency (for example if my laptop would suddenly lose data). The whole code as well as the slides and other documents are in the cloud. I also use source control for my demos, so that I always have the latest and the greatest, but also a history of changes I made to my demos. Finally I have a system of code snippets which works great, and I often had very positive remarks from the audience regarding that. Putting everything in the cloud The one thing I used to be the most scared of was a sudden crash of my laptop, and being unable to restore in time for a conference. Most conferences ask speakers to send slides a few days (or weeks…) in advance, but let's face it, we all have last minute changes to our talks and I always come in the conference with updated slides that I pass to the management team. The answer to that dilemma used to be working off memory sticks, and that worked not bad. However last year I started putting all the documents relating to a conference in a DropBox folder, and that works great too. Obviously DropBox works only if you have connectivity, so if I for instance update slides while on an international flight, I cannot save to the cloud. The obvious answer to that is to backup everything on a memory stick… but I have to admit, I have been trusting my luck and working off my laptop HD and then synching everything to the cloud after landing. Of course on some US national flights you get WiFi on board, so in that case it is even simpler :) Usually after the conference is done, I remove the files from DropBox and copy them to their "final destination". They are backed up from there to BackBlaze, the great online backup service I am using routinely (I currently have about 90GB of data in BackBlaze). Outlining the presentations I like to have a written outline of my presentations written somewhere. I keep it simple, just write the various sections of the presentation with timing. I guess it is a remnant of the time when I was a private pilot, and using checklists for flight preparation. For example: Demo about designability 15' (0:37) Switch to Blend Open MainPage.xaml Create a DataTemplate ... Here I can immediately see during the presentation if I am taking too much time for my demo (0:37 is where I need to be when I am done with this section of the presentation, and 15' is the time that this particular section takes). I keep these sections reasonable, I don't detail every step of the preparation. Typically I have one such section for every 10-15 minutes of my talks. Yes, I am timing my presentations. I keep adjusting these numbers when I rehearse, and this really helps to feel more confident during the presentations. This is especially important for presentations that are long, like my MIX11 demo which clocked at 57 minutes (I had a lot of stuff to show…). Such presentations are risky, because if anything goes wrong, you will have to cut stuff, so the answer to that is: Rehearse, rehearse and when you're done rehearsing, rehearse a little more. I also have a "Preparation" section where I outline what I need to do before a presentation. For instance: Preparation Reboot in VHD Make sure MSN and Twitter are not running. Open VS10 and load demo Open Blend and load demo Run the WP7 emulator ... I typically start preparing my laptop an hour before the talk, starting everything I need to start and then putting my laptop to sleep. Saving and printing the outline, Timing Printing is a real problem because it is really hard to find a printer at most conference venues, and also quite hard in hotels. To solve that, I simply write everything in OneNote (synched to the cloud, now you start to know what I like ;) and then I print it to a PDF (I use CutePDFWriter) that I save to my Kindle. During the presentation, I read the outline off the Kindle (I mostly just need a quick check to see how I am timing). For timing during the presentation, I use the free tool ChronoGPS on my Windows Phone 7, but of course any phone these days has a clock/chrono application. In some conferences, they even have timers that the presenters can see, but they tend to count down and I prefer to count up… so I just use my own :) Source control for demos For demos, I create a separate folder and use Mercurial as source control. Mercurial has the huge advantage (over SVN or TFS) to work offline too, so I can commit while on a plane, and all the history is saved. Then when I have connectivity I push everything to the cloud (I am using the fantastic Trunksapp.com for my private repositories). Here too the obvious downside is the risk of losing my last changes if my laptop crashes before I can push to the cloud, and here too the obvious answer would be to work from a memory stick… though I have to admit I didn't do that lately (except when I was writing Silverlight 4 Unleashed, where I was really paranoid…) And code snippets? I am one of these presenters who hates to type in front of an audience. I can type really fast (writing two books has this advantage, it really teaches you to touch type and be fast at it) but in the context of an audience, on a stage where it is often damn cold (an issue I had a lot in past conferences, air conditioning can freeze your fingers and make it really hard to type), it doesn't work as well. I don't know for you, but I really dislike seeing a presentation where the speaker uses the backspace key more often than others ;) To solve that, I like to have my code ready in snippets, and drag them to the screen. Then I can spend time explaining each code snippet, while highlighting portions of the code (always highlight what you talk about, the audience often doesn't even see the cursor and doesn't know where you are on the screen!) Over the years I have used various solutions for code snippets, and now I have one which works really well… if you take a few precautions! I use the Visual Studio Toolbox. Preparing the code snippets You can store code snippets in the Toolbox for anything, XAML, C# etc. I arrange the snippets in the order in which I need them, which is a great way to remember what comes next in the presentation. I also separate them by topic, to make it easier to find them, for example when I switch to the slides and then back to the code. Remember that no matter how experienced you are, you will feel more nervous on stage than while you are preparing, so any way to make it easier for you is going to be beneficial to the audience. To store a code snippet, I do the following: Open the final demo that you want to show to the audience in Visual Studio. In your code, select a snippet of code that you want to explain in particular. Make sure that the Visual Studio Toolbox is open (menu View, Toolbox or Ctrl-Alt-X). Drag the selected snippet from the code window to the toolbox. (if needed) drag the snippet to the correct location (for example between two other code snippets so that you can access it as you speak through the demo). Right click on the snippet and select Rename Item from the context menu. Select a meaningful name. For me I use the following conventions: If it is a method, I use the method's name. If it is not a whole method, I use a descriptive name. If it is the content of a method (i.e. the body only, without the method's signature), I use "-> MethodName". This reminds me during the presentation that this is only the body, and that I need to insert that into an existing signature. This is the case, for instance, when I use Visual Studio to automatically generate the members of an interface’s implementation; then I only need to insert my snippet inside the generated method body. Saving the snippets This is the most important!! It happened to me a few times that VS10 lost its settings. When that happens, the snippets are lost too! Yeah that really sucks, especially (as it happened once) when this is the case about an hour before a talk… Stress and sweat follows, not good conditions to start a talk in front of an audience believe me. Thankfully, saving snippets is really easy with the following steps: Select the menu Tools, Import and Export Settings. Select Export selected environment settings and press Next. Uncheck All Settings. Then expand General Settings and select Toolbox (only!). Press Next. Select your source control folder and save under a meaningful name (for instance Snippets.vssettings). Commit to source control and push to the cloud. By the way, this also has the advantage of applying source control to the snippets file (which is an XML file), so you get history for free on that file! Reimporting the snippets If VS loses its settings and you need to reimport the snippets, this can be done super easily and very fast. Make sure that the Toolbox is empty. When you import snippets, they are merged with existing ones, they do not replace the content of the Toolbox. Unless merging is really what you want, make sure that your Toolbox is clean before you import, it is really easier. Select the menu Tools, Import and Export Settings. Select Import selected environment settings and press Next. Select No, just import new settings and press Next. Press Browse and select the Snippets.vssettings file. Press Finish. Et voila, all your snippets appear again in the Toolbox. Whew, the worst was averted and you can start your demo without sweating! (I had to do that once literally 5 minutes before the start of a demo, while my laptop was already hooked to the projector, and it went just fine). What about special tools? When using special tools (for example beta versions of tools you have an early access to), or a special configuration of your laptop, things can get tricky because you cannot really be sure that you will get a laptop with the same tools and the same configuration at the conference. To solve that, I use the following precautions: I make my demos from a Virtual Hard Disk. The great John Papa made a very easy-to-follow web page where he explains how to create a VHD and install Win7 to it. This gives you the full power of your laptop (as fast as booting from the metal). For me, I have a basic configuration that I saved on a USB harddrive (Win7 plus drivers, basic settings for desktop, folder options, taskbar etc) and Visual Studio 2010 SP1 on it. When preparing, I start by copying this "basis VHD" to my laptop. I install additional tools and configurations. I save the VHD back to the USB harddrive in a different folder. This would allow me to reinstall my demo environment quite fast, for example in case of harddrive failure. Replace the harddrive, copy the VHD to it, configure the BCD and you can start. Unfortunately this only works if the laptop itself still works. In the worst case of total failure, my security is to back all the installers up: The installers I use are synched on all my laptops and backed up to BackBlaze. If the worst happens and my laptop is absolutely broken, I can download the installer from BackBlaze and install on another laptop. This of course takes some time, and if that happens 5 minutes before a presentation, well… I don't have an answer to that, except of course crossing my fingers. Still, all that gives me additional security. Conclusion Remember folks, talking to an audience, large or small, will make you nervous. Just ask Scott Hanselman :) The goal here is to create the best possible conditions for you, and to create an environment where everything is saved and easy to restore, where everything is well known and provides you with additional confidence. The cooler you feel before the presentation (and during ;)), the better your presentation will be. Here too, the goal is to provide the best user experience you can have, which in turn will make it more enjoyable for your audience! Happy presenting :) Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Abstracting functionality

    - by Ralf Westphal
    Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/08/22/abstracting-functionality.aspxWhat is more important than data? Functionality. Yes, I strongly believe we should switch to a functionality over data mindset in programming. Or actually switch back to it. Focus on functionality Functionality once was at the core of software development. Back when algorithms were the first thing you heard about in CS classes. Sure, data structures, too, were important - but always from the point of view of algorithms. (Niklaus Wirth gave one of his books the title “Algorithms + Data Structures” instead of “Data Structures + Algorithms” for a reason.) The reason for the focus on functionality? Firstly, because software was and is about doing stuff. Secondly because sufficient performance was hard to achieve, and only thirdly memory efficiency. But then hardware became more powerful. That gave rise to a new mindset: object orientation. And with it functionality was devalued. Data took over its place as the most important aspect. Now discussions revolved around structures motivated by data relationships. (John Beidler gave his book the title “Data Structures and Algorithms: An Object Oriented Approach” instead of the other way around for a reason.) Sure, this data could be embellished with functionality. But nevertheless functionality was second. When you look at (domain) object models what you mostly find is (domain) data object models. The common object oriented approach is: data aka structure over functionality. This is true even for the most modern modeling approaches like Domain Driven Design. Look at the literature and what you find is recommendations on how to get data structures right: aggregates, entities, value objects. I´m not saying this is what object orientation was invented for. But I´m saying that´s what I happen to see across many teams now some 25 years after object orientation became mainstream through C++, Delphi, and Java. But why should we switch back? Because software development cannot become truly agile with a data focus. The reason for that lies in what customers need first: functionality, behavior, operations. To be clear, that´s not why software is built. The purpose of software is to be more efficient than the alternative. Money mainly is spent to get a certain level of quality (e.g. performance, scalability, security etc.). But without functionality being present, there is nothing to work on the quality of. What customers want is functionality of a certain quality. ASAP. And tomorrow new functionality needs to be added, existing functionality needs to be changed, and quality needs to be increased. No customer ever wanted data or structures. Of course data should be processed. Data is there, data gets generated, transformed, stored. But how the data is structured for this to happen efficiently is of no concern to the customer. Ask a customer (or user) whether she likes the data structured this way or that way. She´ll say, “I don´t care.” But ask a customer (or user) whether he likes the functionality and its quality this way or that way. He´ll say, “I like it” (or “I don´t like it”). Build software incrementally From this very natural focus of customers and users on functionality and its quality follows we should develop software incrementally. That´s what Agility is about. Deliver small increments quickly and often to get frequent feedback. That way less waste is produced, and learning can take place much easier (on the side of the customer as well as on the side of developers). An increment is some added functionality or quality of functionality.[1] So as it turns out, Agility is about functionality over whatever. But software developers’ thinking is still stuck in the object oriented mindset of whatever over functionality. Bummer. I guess that (at least partly) explains why Agility always hits a glass ceiling in projects. It´s a clash of mindsets, of cultures. Driving software development by demanding small increases in functionality runs against thinking about software as growing (data) structures sprinkled with functionality. (Excuse me, if this sounds a bit broad-brush. But you get my point.) The need for abstraction In the end there need to be data structures. Of course. Small and large ones. The phrase functionality over data does not deny that. It´s not functionality instead of data or something. It´s just over, i.e. functionality should be thought of first. It´s a tad more important. It´s what the customer wants. That´s why we need a way to design functionality. Small and large. We need to be able to think about functionality before implementing it. We need to be able to reason about it among team members. We need to be able to communicate our mental models of functionality not just by speaking about them, but also on paper. Otherwise reasoning about it does not scale. We learned thinking about functionality in the small using flow charts, Nassi-Shneiderman diagrams, pseudo code, or UML sequence diagrams. That´s nice and well. But it does not scale. You can use these tools to describe manageable algorithms. But it does not work for the functionality triggered by pressing the “1-Click Order” on an amazon product page for example. There are several reasons for that, I´d say. Firstly, the level of abstraction over code is negligible. It´s essentially non-existent. Drawing a flow chart or writing pseudo code or writing actual code is very, very much alike. All these tools are about control flow like code is.[2] In addition all tools are computationally complete. They are about logic which is expressions and especially control statements. Whatever you code in Java you can fully (!) describe using a flow chart. And then there is no data. They are about control flow and leave out the data altogether. Thus data mostly is assumed to be global. That´s shooting yourself in the foot, as I hope you agree. Even if it´s functionality over data that does not mean “don´t think about data”. Right to the contrary! Functionality only makes sense with regard to data. So data needs to be in the picture right from the start - but it must not dominate the thinking. The above tools fail on this. Bottom line: So far we´re unable to reason in a scalable and abstract manner about functionality. That´s why programmers are so driven to start coding once they are presented with a problem. Programming languages are the only tool they´ve learned to use to reason about functional solutions. Or, well, there might be exceptions. Mathematical notation and SQL may have come to your mind already. Indeed they are tools on a higher level of abstraction than flow charts etc. That´s because they are declarative and not computationally complete. They leave out details - in order to deliver higher efficiency in devising overall solutions. We can easily reason about functionality using mathematics and SQL. That´s great. Except for that they are domain specific languages. They are not general purpose. (And they don´t scale either, I´d say.) Bummer. So to be more precise we need a scalable general purpose tool on a higher than code level of abstraction not neglecting data. Enter: Flow Design. Abstracting functionality using data flows I believe the solution to the problem of abstracting functionality lies in switching from control flow to data flow. Data flow very naturally is not about logic details anymore. There are no expressions and no control statements anymore. There are not even statements anymore. Data flow is declarative by nature. With data flow we get rid of all the limiting traits of former approaches to modeling functionality. In addition, nomen est omen, data flows include data in the functionality picture. With data flows, data is visibly flowing from processing step to processing step. Control is not flowing. Control is wherever it´s needed to process data coming in. That´s a crucial difference and needs some rewiring in your head to be fully appreciated.[2] Since data flows are declarative they are not the right tool to describe algorithms, though, I´d say. With them you don´t design functionality on a low level. During design data flow processing steps are black boxes. They get fleshed out during coding. Data flow design thus is more coarse grained than flow chart design. It starts on a higher level of abstraction - but then is not limited. By nesting data flows indefinitely you can design functionality of any size, without losing sight of your data. Data flows scale very well during design. They can be used on any level of granularity. And they can easily be depicted. Communicating designs using data flows is easy and scales well, too. The result of functional design using data flows is not algorithms (too low level), but processes. Think of data flows as descriptions of industrial production lines. Data as material runs through a number of processing steps to be analyzed, enhances, transformed. On the top level of a data flow design might be just one processing step, e.g. “execute 1-click order”. But below that are arbitrary levels of flows with smaller and smaller steps. That´s not layering as in “layered architecture”, though. Rather it´s a stratified design à la Abelson/Sussman. Refining data flows is not your grandpa´s functional decomposition. That was rooted in control flows. Refining data flows does not suffer from the limits of functional decomposition against which object orientation was supposed to be an antidote. Summary I´ve been working exclusively with data flows for functional design for the past 4 years. It has changed my life as a programmer. What once was difficult is now easy. And, no, I´m not using Clojure or F#. And I´m not a async/parallel execution buff. Designing the functionality of increments using data flows works great with teams. It produces design documentation which can easily be translated into code - in which then the smallest data flow processing steps have to be fleshed out - which is comparatively easy. Using a systematic translation approach code can mirror the data flow design. That way later on the design can easily be reproduced from the code if need be. And finally, data flow designs play well with object orientation. They are a great starting point for class design. But that´s a story for another day. To me data flow design simply is one of the missing links of systematic lightweight software design. There are also other artifacts software development can produce to get feedback, e.g. process descriptions, test cases. But customers can be delighted more easily with code based increments in functionality. ? No, I´m not talking about the endless possibilities this opens for parallel processing. Data flows are useful independently of multi-core processors and Actor-based designs. That´s my whole point here. Data flows are good for reasoning and evolvability. So forget about any special frameworks you might need to reap benefits from data flows. None are necessary. Translating data flow designs even into plain of Java is possible. ?

    Read the article

  • CodePlex Daily Summary for Wednesday, April 11, 2012

    CodePlex Daily Summary for Wednesday, April 11, 2012Popular ReleasesCommand-Line Database Builder: 1.0.2012.0411: Utility now supports arbitrary key:value pairs on the command-line for performing replacements in the .pp.sql files. Removed the usage of '-' to prefix key:value arguments. AspNetAssemblyPath is no longer a known key:value pair but can still be used because the tool now supports arbitrary key:value pairs for replacements. This was provided previously to support setting up ASP.NET Membership and Roles in a database. I've added a .pp.sql file to the Examples archive that demonstrates this usage.Supporting Guidance and Whitepapers: v1 - Team Foundation Service Whitepapers: Welcome to the BETA release of the Team Foundation Service Whitepapers preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review All critical bugs have been resolved Known Issue...Scrum Task Board Card Creator: TaskCardCreator 3.2.0.0: What's New: New report template added: Microsoft Visual Studio Scrum 1.0 Detailed Report Supported Templates: Microsoft Visual Studio Scrum 1.0 MSF for Agile Software Development v5.0Microsoft .NET Gadgeteer: .NET Gadgeteer Core 2.42.550 (BETA): Microsoft .NET Gadgeteer Core RELEASE NOTES Version 2.42.550 11 April 2012 BETA VERSION WARNING: This is a beta version! Please note: - API changes may be made before the next version (2.42.600) - The designer will not show modules/mainboards for NETMF 4.2 until you get upgraded libraries from the module/mainboard vendors - Install NETMF 4.2 (see link below) to use the new features of this release That warning aside, this version should continue to sup...DISM GUI: DISM GUI 3.1.1: Fixes - Fixed a bug in the Delete Driver function - The Index field is not auto populated with the number 1LINQ to Twitter: LINQ to Twitter Beta v2.0.24: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, and Client Profile. 100% Twitter API coverage. Also available via NuGet.Kendo UI ASP.NET Sample Applications: Sample Applications (2012-04-11): Sample application(s) demonstrating the use of Kendo UI in ASP.NET applications.Json.NET: Json.NET 4.5 Release 2: New feature - Added support for the SerializableAttribute and serializing a type's internal fields New feature - Added MaxDepth to JsonReader/JsonSerializer/JsonSerializerSettings New feature - Added support for ignoring properties with the NonSerializableAttribute Fix - Fixed deserializing a null string throwing a NullReferenceException Fix - Fixed JsonTextReader reading from a slow stream Fix - Fixed CultureInfo not being overridden on JsonSerializerProxy Fix - Fixed full trust ...SCCM Client Actions Tool: SCCM Client Actions Tool v1.12: SCCM Client Actions Tool v1.12 is the latest version. It comes with following changes since last version: Improved WMI date conversion to be aware of timezone differences and DST. Fixed new version check. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively availab...Dual Browsing: Dual Browser: Please note the following: I setup the address bar temporarily to only accepts http:// .com addresses. Just type in the name of the website excluding: http://, www., and .com; (Ex: for www.youtube.com just type: youtube then click OK). The page splitter can be grabbed by holding down your left mouse button and move left or right. By right clicking on the page background, you can choose to refresh, go back a page and so on. Demo video: http://youtu.be/L7NTFVM3JUYMultiwfn: Multiwfn 2.3.3: Multiwfn 2.3.3Liberty: v3.2.0.1 Release 9th April 2012: Change Log-Fixed -Reach Fixed a bug where the object editor did not work on non-English operating systemsPath Copy Copy: 10.1: This release addresses the following work items: 11357 11358 11359 This release is a recommended upgrade, especially for users who didn't install the 10.0.1 version.ExtAspNet: ExtAspNet v3.1.3: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-04-08 v3.1.3 -??Language="zh_TW"?JS???BUG(??)。 +?D...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.5: New Controls ChatBubble ChatBubbleTextBox OpacityToggleButton New Stuff TimeSpan languages added: RU, SK, CS Expose the physics math from TimeSpanPicker Image Stretch now on buttons Bug Fixes Layout fix so RoundToggleButton and RoundButton are exactly the same Fix for ColorPicker when set via code behind ToastPrompt bug fix with OnNavigatedTo Toast now adjusts its layout if the SIP is up Fixed some issues with Expression Blend supportHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...ClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceNew Projects0x10c Tools: Tools for the 0x10c-CPU: Assembler, emulator and (maybe in the future) a small compiler. Just for fun and exercise.AzureWiki: AzureWiki is the Wiki developed using Windows Azure platform which would be similar to dotnetwikiCommand-Line Database Builder: A command-line tool for interacting with a DBMS command-line interface (e.g., sqlcmd.exe) to execute a sequential list of SQL scripts against the DBMS. Tool allows for expression replacement in the SQL scripts during execution.copydata: The CopyData command-line utility enables you to easily transfer sets of data from an Oracle or SQL server data source directly to a target SQL Server database. It is developed in C#.DinoDoc: The little friendly batch-upload tool designed for SharePoint Server and Windows SharePoint Services, enabling you to easily upload multiple files and folders with a single click! For more information about DinoDoc and about SharePoint development: http://spdino.wordpress.comDiscovery House: This is a project demonstrating a green home.DocShare: DocShare illustrates the CQRS pattern on Windows Azure and also uses MVC4 Web API. DocShare uses two web roles, one for queries (reads) and one for command (writes). Each has a UI and a Web API service.EnderTecLauncher: EnderTecLauncherEntityFilter: This library provides a way to store filtering metadata, and reassemble it into dynamic lambda expressions. It allows for groups of filters to be created. Two implementations of IFilterRepository are in development:Database and XML. It's developed in C# for EntityFramework 4.1 and above.Epi Info™ - Web Analysis & Visualization: Epi Info™ is a public domain suite of software tools designed for the global community of public health practitioners and researchers. It provides for easy data entry form and database construction, a customized data entry experience, and data analyses with epidemiologic statistic Epi Info™ Web Analytics & Visualization is an open source project of the popular Epi Info™ suite of tools. The web product can be deployed as an intranet application and will provide analytical and visualization ...fOrganiz: This application allows you to automatically organize by date in specific subdirectories your picturesforwork: forworkGeneric Language - Mobile & Telephony Technologies: Genlang Mobile and Telephony Technologies, a complete application development platform for all platforms, Windows Mobile, Windows Desktop, Web, Apple, Android, BlackBerry.gindex: Graph has become increasingly important in modelling complicated structures and schemaless data such as proteins,chemical compounds, and XML documents. Given a graph query, it is desirable to retrieve graphs quickly from a large database via graph-based indices.Hijri Date SkinObject: Hijri date skin object for dotnetnuke copy to admin/skins use it in your skin file HorseRaces: Exercise inspired on example found in book "Designing for scalability with Microsoft Windows DNA" by Sten Sundblad and Per SundbladHotelMS: HotelManageSystemhtml5lmth: testjRulee: The jRulee javascript toolkit libraryKrishaTool: oloLegSec: LegSec is an small command line application for collating licence information based on that provided in Nuget packages. Modwind Domain Info: The program determines country of origin for top-level domains and purpose for international ones.MySCM Outlook Addin: This is another tool for SCM/TFS team. Use this add-in to create, update, refresh TFS work items from your Outlook emails. Not a substitution, but this little tool can help you to track your various work in TFS while educating and establishing the processes and policies.neptouni: This software can be used to convert nepali ttf text to the unicode characters.Northwind SSDT: An SSDT project for the Northwind database. This will enable you to deploy Northwind wherever you like. Note that to allow for hosting in a SQL Azure database that is used to host objects for other applications all the Northwind objects have been moved into a schema called [Northwind]Optional: Optional is a library to create options and commands from command-line arguments. It uses Convention over Configuration to get out of your way. Attributes can be used to set properties which differ from the convention.pbdevnpro1: pbdevnpro1,no1Projet LIF7 Snake: Projet LIF7 SnakePurpleStoat: A modular, extensible Silverlight application shell using Prism, Unity and the Enterprise Library, and written in C#. It includes WCF services which provide AuthZ and logging services to the shell, which are also available to the modules.Sharepoint 2010 Weather WebPart using Azure Data Market Met Office Feed: Sharepoint 2010 WebPart that displays a 5 day weather forecast for a given location. The weather data is retrieved from the Met Office feed hosted on the Windows Azure Data Market. This is a free data feed that provides weather data for the UK only.Silverlight Layouts: Silverlight Layouts is a project for controls that behave as content placeholders with pre-defined GUI layout for some of common scenarios: - frozen headers, - frozen columns, - cyrcle layouts etc.Snom Phone .NET Library: .NET Automation library for the snom IP phones. Provides simple class library to interact with you snom phone: - Press any key on the phone. - Dial numbers. - Answer or hang up call. - Mute and un-mute. - Hold and un-hold a call. - Navigate through a routing phone system using dial tone. - Get events on incoming or outgoing calls, as well as other events. - And more...Substrate Windows 8 XAML Framework: Framework for writing Windows 8 applications in XAMLTiger Converters: Tiger is a small languaje based on expressions, so it's perfect for writing the body of a WPF/SL converter.Time manager by bozheville: Time manager by bozhevilleUmbraco 501 on Windows Azure (with Dynamic Deploy): This project is configured to run Umbraco 5.0.1 on Windows Azure via the Dynamic Deploy platform. For more information on Dynamic Deploy visit http://www.dynamicdeploy.com Dynamic Deploy is a cloud deployment platform from where you can deploy applications directly to cloud platforms (like Windows Azure). UnitPrice: This is unit priceWebmedia: this is my webmedia projectWindows 8 Metro RSS Reader: A RSS Reader metro app for Windows 8 written in C# and XAML based on the sample Grid templateWindows Phone UPnP: The basics of a UPnP network stack for Windows Phone, based on a blog post originally. Written in C#, also requires the Async CTP. Includes device discovery via SSDP and method invocation.WinRT XAML Toolkit: A set of controls, extensions and helper classes for Windows Runtime XAML applicationsWmiGuru: WmiGuru is a lightweight F# library for WMI operations such as getting instances, creating instance, and querying associated instances.????: ???? ??.net mvc3??。??jquery+html5????。?????: openwebsite

    Read the article

  • CodePlex Daily Summary for Tuesday, January 18, 2011

    CodePlex Daily Summary for Tuesday, January 18, 2011Popular ReleasesThe Open Source Phasor Data Concentrator: January 2011 openPDC v1.4 Release: Planned version of the January 2011, version 1.4 release of the openPDC. This is a functional BETA version of the January 2011 openPDC. The final release of this version will include integrated system user authentication in the openPDC Manager along with detailed configuration change logging. Update notes: Real-time data access / subscription based API available supporting full resolution as well as down-sampled data Improved UDP_T support (control channel failure monitoring independent...mytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.52.1 beta 2: New MVC3 RTM fix bug: Dropdown select fix bug: Add Store/Department and Add Store/Produser WEB.mytrip.mvc 1.0.52.1 Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) SRC.mytrip.mvc 1.0.52.1 System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net...Windows 7 Werkbank: PixelShader in WPF: Dieses Beispiel demonstriert wie man Pixelshader in bestehende WPF-Anwendungen integrieren kann, um mit grafische "Spielereien" die Oberfläche aufzuwerten.QRCode Helper: ver.1.0.0: This is first release.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager changes: RenderView controller extension works for razor also live demo switched to razorBloodSim: BloodSim - 1.3.3.1: - Priority update to resolve a bug that was causing Boss damage to ignore Blood Shields entirelyRawr: Rawr 4.0.16 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of this release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. W...MvcContrib: an Outer Curve Foundation project: MVC 3 - 3.0.51.0: Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcContrib.TestHelper.dll MvcContrib.Extras.Release.zip T4MVC. The extra view engines / controller factories and other functionality which is in the project. This file includes the main MvcContrib assembly. Samples are included in the release. You do not need MvcContrib if you download the Extras.N2 CMS: 2.1.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. 2.1.1 Maintenance release List of changes 2.1 Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open...VidCoder: 0.8.1: Adds ability to choose an arbitrary range (in seconds or frames) to encode. Adds ability to override the title number in the output file name when enqueing multiple titles. Updated presets: Added iPhone 4, Apple TV 2, fixed some existing presets that should have had weightp=0 or trellis=0 on them. Added {parent} option to auto-name format. Use {parent:2} to refer to a folder 2 levels above the input file. Added {title:2} option to auto-name format. Adds leading zeroes to reach the sp...Microsoft SQL Server Product Samples: Database: AdventureWorks2008R2 without filestream: This download contains a version of the AdventureWorks2008R2 OLTP database without FILESTREAM properties. You do not need to have filestream enabled to attach this database. No additional schema or data changes have been made. To install the version of AdventureWorks2008R2 that includes filestream, use the SR1 installer available here. Prerequisites: Microsoft SQL Server 2008 R2 must be installed. Full-Text Search must be enabled. Installing the AdventureWorks2008R2 OLTP database: 1. Cl...NuGet: NuGet 1.0 RTM: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog.MVC Music Store: MVC Music Store v2.0: This is the 2.0 release of the MVC Music Store Tutorial. This tutorial is updated for ASP.NET MVC 3 and Entity Framework Code-First, and contains fixes and improvements based on feedback and common questions from previous releases. The main download, MvcMusicStore-v2.0.zip, contains everything you need to build the sample application, including A detailed tutorial document in PDF format Assets you will need to build the project, including images, a stylesheet, and a pre-populated databas...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.7 GA Released: Hi, Today we are releasing Visifire 3.6.7 GA with the following feature: * Inlines property has been implemented in Title. Also, this release contains fix for the following bugs: * In Column and Bar chart DataPoint’s label properties were not working as expected at real-time if marker enabled was set to true. * 3D Column and Bar chart were not rendered properly if AxisMinimum property was set in x-axis. You can download Visifire v3.6.7 here. Cheers, Team Visifire??????????: All-In-One Code Framework ??? 2011-01-12: 2011???????All-In-One Code Framework(??) 2011?1??????!!http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?,???????ASP.NET, AJAX, WinForm, Windows Shell????13?Sample Code。???,??????????sample code。 ?????:http://blog.csdn.net/sjb5201/archive/2011/01/13/6135037.aspx ??,??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????,??Email ????patterns & practices – Enterprise Library: Enterprise Library 5.0 - Extensibility Labs: This is a preview release of the Hands-on Labs to help you learn and practice different ways the Enterprise Library can be extended. Learning MapCustom exception handler (estimated time to complete: 1 hr 15 mins) Custom logging trace listener (1 hr) Custom configuration source (registry-based) (30 mins) System requirementsEnterprise Library 5.0 / Unity 2.0 installed SQL Express 2008 installed Visual Studio 2010 Pro (or better) installed AuthorsChris Tavares, Microsoft Corporation ...Orchard Project: Orchard 1.0: Orchard Release Notes Build: 1.0.20 Published: 1/12/2010 How to Install OrchardTo install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.1.0.20.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run...Umbraco CMS: Umbraco 4.6.1: The Umbraco 4.6.1 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're ...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14986.000: A considerable amount of work has gone into this release: Features: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the ...Facebook C# SDK: 4.2.1: - Authentication bug fixes - Updated Json.Net to version 4.0.0 - BREAKING CHANGE: Removed cookieSupport config setting, now automatic. This download is also availible on NuGet: Facebook FacebookWeb FacebookWebMvcNew ProjectsAmazon Clone MVC: Amazon CloneBogglex: Bogglex is a single player Boggle game written using C# and WPF.ClomibepASP: ClomibepASPCommandLineHelp: CommandLineHelp is a framework for simplifying the automated execution of command-line programs and saving their output.DistriLog: This is set of libraries that allow you to handle distributed logging. This is aimed at applications that are installed on multiple machines and instead of having a central log server(that may slow down the application due to network latency), a local log is created. A synchronization process then unifies these logs into a central SQL database. Local database is SQL Server 2005 Compact Edition, the library is in VB and the central database is SQL Server 2005enmeshed: A set of technology trials for efficient network streaming/transfer.Hexing Colors for Windows Phone 7: Hexing Colors is a simple Silverlight game for Windows Phone 7 based on the web game "What the Hex" written by Andrew Yang and created for educational purposes. The code of the app is here published for anyone to download and analyze it to learn the basic internals of a WP7 app.NetChannels: NetChannels is a library to provide an asynchronous event-driven network application framework for the rapid development of maintainable high-performance high-scalability protocol servers. It is based on the architecture of the netty project for C#.NMEA Sentence Parser: The NMEA Parser is a lightweight library used to parse NMEA sentences into geocodes which can be used in geoservice applications. The project is written in C#, using Visual Studio 2010.NUnit Windows Phone 7: Project to run NUnit Tests on Windows Phone 7 with a list of results shown and drill down detail view.Pratiques: Endroit pour gérer les Pratiques.Project-Cena2: Project-Cena2ReportEngine: The is report platform, it' can be extend to export reportSharepoint DeepZoom Search: This project demonstrates using A Silverlight DeepZoom app to query the SharePoint search api and show those results as deep zoom tiles. This project is based upon or uses components from the Eventr and SuperDeepZoom projects.SilverDesktop: SDSixport: Sixport is the C# port of the hexter DSSI software synthesizer plugin created by Sean Bolton and others. hexter is an open source emulation of the legendary Yamaha DX7 synthesizer. Changes done: OOP structure, algorithm specific rendering, LADSPA removal, speed improvements.Smug: Is your time writing code too valuable to spend writing tests? Are you too good for test code; too smug? Smug is a Studs and Mocks Uber Generator; a factory for creating proxy objects to simplify testing.sptest: one of the projectSQL Azure Demos: Home for Microsoft SQL Azure screencasts and demo applications.StaffPenalties: Staff Penalties... simple silverlight appTFS Global Alerts: A web service to notify any number of users when any work item in TFS changes. Notification logic is easily customisable to suit your environment. XNA SfxrSynth: Using settings from as3sfxr, SfxrSynth generates audio in the form of XNA SoundEffects for using in Windows or Xbox 360 games.???: ???????。

    Read the article

  • How to safely reboot via First Boot script

    - by unixman
    With the cost and performance benefits of the SPARC T4 and SPARC T5 systems undeniably validated, the banking sector is actively moving to Solaris 11.  I was recently asked to help a banking customer of ours look at migrating some of their Solaris 10 logic over to Solaris 11.  While we've introduced a number of holistic improvements in Solaris 11, in terms of how we ease long-term software lifecycle management, it is important to appreciate that customers may not be able to move all of their Solaris 10 scripts and procedures at once; there are years of scripts that reflect fine-tuned requirements of proprietary banking software that gets layered on top of the operating system. One of these requirements is to go through a cycle of reboots, after the system is installed, in order to ensure appropriate software dependencies and various configuration files are in-place. While Solaris 10 introduced a facility that aids here, namely SMF, many of our customers simply haven't yet taken the time to take advantage of this - proceeding with logic that, while functional, without further analysis has an appearance of not being optimal in terms of taking advantage of all the niceties bundled in Solaris 11 at no extra cost. When looking at Solaris 11, we recognize that one of the vehicles that bridges the gap between getting the operating system image payload delivered, and the customized banking software installed, is a notion of a First Boot script.  I had a working example of this at one of the Oracle OpenWorld sessions a few years ago - we've since improved our documentation and have introduced sections where this is described in better detail.   If you're looking at this for the first time and you've not worked with IPS and SMF previously, you might get the sense that the tasks are daunting.   There is a set of technologies involved that are jointly engineered in order to make the process reliable, predictable and extensible. As you go down the path of writing your first boot script, you'll be faced with a need to wrap it into a SMF service and then packaged into a IPS package. The IPS package would then need to be placed onto your IPS repository, in order to subsequently be made available to all of your AI (Automated Install) clients (i.e. the systems that you're installing Solaris and your software onto).     With this blog post, I wanted to create a single place that outlines the entire process (simplistically), and provide a hint of how a good old "at" command may make the requirement of forcing an initial reboot handy. The syntax and references to commands here is based on running this on a version of Solaris 11 that has been updated since its initial release in 2011 (i.e. I am writing this on Solaris 11.1) Assuming you've built an AI server (see this How To article for an example), you might be asking yourself: "Ok, I've got some logic that I need executed AFTER Solaris is deployed and I need my own little script that would make that happen. How do I go about hooking that script into the Solaris 11 AI framework?"  You might start here, in Chapter 13 of the "Installing Oracle Solaris 11.1 Systems" guide, which talks about "Running a Custom Script During First Boot".  And as you do, you'll be confronted with command that might be unfamiliar to you if you're new to Solaris 11, like our dear new friend: svcbundle svcbundle is an aide to creating manifests and profiles.  It is awesome, but don't let its awesomeness overwhelm you. (See this How To article by my colleague Glynn Foster for a nice working example).  In order to get your script's logic integrated into the Solaris 11 deployment process, you need to wrap your (shell) script into 2 manifests -  a SMF service manifest and a IPS package manifest.  ....and if you're new to XML, well then -- buckle up We have some examples of small first boot scripts shown here, as templates to build upon. Necessary structure of the script, particularly in leveraging SMF interfaces, is key. I won't go into that here as that is covered nicely in the doc link above.    Let's say your script ends up looking like this (btw: if things appear to be cut-off in your browser, just select them, copy and paste into your editor and it'll be grabbed - the source gets captured eventhough the browser may not render it "correctly" - ah, computers). #!/bin/sh # Load SMF shell support definitions . /lib/svc/share/smf_include.sh # If nothing to do, exit with temporary disable completed=`svcprop -p config/completed site/first-boot-script-svc:default` [ "${completed}" = "true" ] && \ smf_method_exit $SMF_EXIT_TEMP_DISABLE completed "Configuration completed" # Obtain the active BE name from beadm: The active BE on reboot has an R in # the third column of 'beadm list' output. Its name is in column one. bename=`beadm list -Hd|nawk -F ';' '$3 ~ /R/ {print $1}'` beadm create ${bename}.orig echo "Original boot environment saved as ${bename}.orig" # ---- Place your one-time configuration tasks here ---- # For example, if you have to pull some files from your own pre-existing system: /usr/bin/wget -P /var/tmp/ $PULL_DOWN_ADDITIONAL_SCRIPTS_FROM_A_CORPORATE_SYSTEM /usr/bin/chmod 755 /var/tmp/$SCRIPTS_THAT_GOT_PULLED_DOWN_IN_STEP_ABOVE # Clearly the above 2 lines represent some logic that you'd have to customize to fit your needs. # # Perhaps additional things you may want to do here might be of use, like # (gasp!) configuring ssh server for root login and X11 forwarding (for testing), and the like... # # Oh and by the way, after we're done executing all of our proprietary scripts we need to reboot # the system in accordance with our operational software requirements to ensure all layered bits # get initialized properly and pull-in their own modules and components in the right sequence, # subsequently. # We need to set a "time bomb" reboot, that would take place upon completion of this script. # We already know that *this* script depends on multi-user-server SMF milestone, so it should be # safe for us to schedule a reboot for 5 minutes from now. The "at" job get scheduled in the queue # while our little script continues thru the rest of the logic. /usr/bin/at now + 5 minutes <<REBOOT /usr/bin/sync /usr/sbin/reboot REBOOT # ---- End of your customizations ---- # Record that this script's work is done svccfg -s site/first-boot-script-svc:default setprop config/completed = true svcadm refresh site/first-boot-script-svc:default smf_method_exit $SMF_EXIT_TEMP_DISABLE method_completed "Configuration completed"  ...and you're happy with it and are ready to move on. Where do you go and what do you do? The next step is creating the IPS package for your script. Since running the logic of your script constitutes a service, you need to create a service manifest. This is described here, in the middle of Chapter 13 of "Creating an IPS package for the script and service".  Assuming the name of your shell script is first-boot-script.sh, you could end up doing the following: $ cd some_working_directory_for_this_project$ mkdir -p proto/lib/svc/manifest/site$ mkdir -p proto/opt/site $ cp first-boot-script.sh proto/opt/site  Then you would create the service manifest  file like so: $ svcbundle -s service-name=site/first-boot-script-svc \ -s start-method=/opt/site/first-boot-script.sh \ -s instance-property=config:completed:boolean:false -o \ first-boot-script-svc-manifest.xml   ...as described here, and place it into the directory hierarchy above. But before you place it into the directory, make sure to inspect the manifest and adjust the appropriate service dependencies.  That is to say, you want to properly specify what milestone should be reached before your service runs.  There's a <dependency> section that looks like this, before you modify it: <dependency restart_on="none" type="service" name="multi_user_dependency" grouping="require_all"> <service_fmri value="svc:/milestone/multi-user"/>  </dependency>  So if you'd like to have your service run AFTER the multi-user-server milestone has been reached (i.e. later, as multi-user-server has more dependencies then multi-user and our intent to reboot the system may have significant ramifications if done prematurely), you would modify that section to read:  <dependency restart_on="none" type="service" name="multi_user_server_dependency" grouping="require_all"> <service_fmri value="svc:/milestone/multi-user-server"/>  </dependency> Save the file and validate it: $ svccfg validate first-boot-script-svc-manifest.xml Assuming there are no errors returned, copy the file over into the directory hierarchy: $ cp first-boot-script-svc-manifest.xml proto/lib/svc/manifest/site Now that we've created the service manifest (.xml), create the package manifest (.p5m) file named: first-boot-script.p5m.  Populate it as follows: set name=pkg.fmri value=first-boot-script-AT-1-DOT-0,5.11-0 set name=pkg.summary value="AI first-boot script" set name=pkg.description value="Script that runs at first boot after AI installation" set name=info.classification value=\ "org.opensolaris.category.2008:System/Administration and Configuration" file lib/svc/manifest/site/first-boot-script-svc-manifest.xml \ path=lib/svc/manifest/site/first-boot-script-svc-manifest.xml owner=root \ group=sys mode=0444 dir path=opt/site owner=root group=sys mode=0755 file opt/site/first-boot-script.sh path=opt/site/first-boot-script.sh \ owner=root group=sys mode=0555 Now we are going to publish this package into a IPS repository. If you don't have one yet, don't worry. You have 2 choices: You can either  publish this package into your mirror of the Oracle Solaris IPS repo or create your own customized repo.  The best practice is to create your own customized repo, leaving your mirror of the Oracle Solaris IPS repo untouched.  From this point, you have 2 choices as well - you can either create a repo that will be accessible by your clients via HTTP or via NFS.  Since HTTP is how the default Solaris repo is accessed, we'll go with HTTP for your own IPS repo.   This nice and comprehensive How To by Albert White describes how to create multiple internal IPS repos for Solaris 11. We'll zero in on the basic elements for our needs here: We'll create the IPS repo directory structure hanging off a separate ZFS file system, and we'll tie it into an instance of pkg.depotd. We do this because we want our IPS repo to be accessible to our AI clients through HTTP, and the pkg.depotd SMF service bundled in Solaris 11 can help us do this. We proceed as follows: # zfs create rpool/export/MyIPSrepo # pkgrepo create /export/MyIPSrepo # svccfg -s pkg/server add MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpg pkg application # svccfg -s pkg/server:MyIPSrepo setprop pkg/port=10081 # svccfg -s pkg/server:MyIPSrepo setprop pkg/inst_root=/export/MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpg general framework # svccfg -s pkg/server:MyIPSrepo addpropvalue general/complete astring: MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpropvalue general/enabled boolean: true # svccfg -s pkg/server:MyIPSrepo setprop pkg/readonly=true # svccfg -s pkg/server:MyIPSrepo setprop pkg/proxy_base = astring: http://your_internal_websrvr/MyIPSrepo # svccfg -s pkg/server:MyIPSrepo setprop pkg/threads = 200 # svcadm refresh application/pkg/server:MyIPSrepo # svcadm enable application/pkg/server:MyIPSrepo Now that the IPS repo is created, we need to publish our package into it: # pkgsend publish -d ./proto -s /export/MyIPSrepo first-boot-script.p5m If you find yourself making changes to your script, remember to up-rev the version in the .p5m file (which is your IPS package manifest), and re-publish the IPS package. Next, you need to go to your AI install server (which might be the same machine) and modify the AI manifest to include a reference to your newly created package.  We do that by listing an additional publisher, which would look like this (replacing the IP address and port with your own, from the "svccfg" commands up above): <publisher name="firstboot"> <origin name="http://192.168.1.222:10081"/> </publisher>  Further down, in the  <software_data action="install">  section add: <name>pkg:/first-boot-script</name> Make sure to update your Automated Install service with the new AI manifest via installadm update-manifest command.  Don't forget to boot your client from the network to watch the entire process unfold and your script get tested.  Once the system makes the initial reboot, the first boot script will be executed and whatever logic you've specified in it should be executed, too, followed by a nice reboot. When the system comes up, your service should stay in a disabled state, as specified by the tailing lines of your SMF script - this is normal and should be left as is as it helps provide an auditing trail for you.   Because the reboot is quite a significant action for the system, you may want to add additional logic to the script that actually places and then checks for presence of certain lock files in order to avoid doing a reboot unnecessarily. You may also want to, alternatively, remove the SMF service entirely - if you're unsure of the potential for someone to try and accidentally enable that service -- eventhough its role in life is to only run once upon the system's first boot. That is how I spent a good chunk of my pre-Halloween time this week, hope yours was just as SPARCkly^H^H^H^H fun!    

    Read the article

  • CodePlex Daily Summary for Tuesday, October 09, 2012

    CodePlex Daily Summary for Tuesday, October 09, 2012Popular ReleasesScript SQL Server Configuration: Release 3.0.9: Release 3.0.9 Rewrote trigger scripting. If encrypted triggers are encountered they are listed in a commented line. Scripts event notifications Added an option to script a single database (in addition to the instance) using the /scriptdb parameter. Script user-defined end points Script Service Broker objects Skip database mail on Express EditionMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...D3 Loot Tracker: 1.5.2: now recording server ip for each drop.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...DevLib: 69721 binary dll: 69721 binary dllVidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...Sofire Suite v1.6: XSqlModelGenerator.AddIn: 1、?? VS2010/2012 2、?? .NET FRAMEWORK 2.0 3、?? SOFIRE V1.6ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y...Z3: Z3 4.1.2: Minor fixes. Now, z3 compiles with gcc 4.7.x.NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...NTCPMSG: V1.2.0.0: Allocate an identify cableid for each single connection cable. * Server can asend to specified cableid directly.Team Foundation Server Word Add-in: Version 1.0.12.0622: Welcome to the Visual Studio Team Foundation Server Word Add-in Supported Environments Microsoft Office Word 2007 and 2010 X86 (32-bit) Team Foundation Server 2010 Object Model TFS 2010, 2012 and TFS Service supported, using TFS OM / Explorer 2010. Quality-Bar Details Tool has been reviewed by Visual Studio ALM Rangers Tool has been through an independent technical and quality review All critical bugs have been resolved Known Issues / Bugs WI#43553 - The Acceptance criteria is not pu...UMD????? - PC?: UMDEditor?????V2.7: ??:http://jianyun.org/archives/948.html =============================================================================== UMD??? ???? =============================================================================== 2.7.0 (2012-10-3) ???????“UMD???.exe”??“UMDEditor.exe” ?????????;????????,??????。??????,????! ??64????,??????????????bug ?????????????,???? ???????????????? ???????????????,??????????bug ------------------------------------------------------- ?? reg.bat ????????????。 ????,??????txt/u...Untangler: Untangler 1.0.0: Add a missing file from first releaseNew Projects3dBuzz: Denise's website for 3d projection mapping artists to develop a web community to show and discuss their work.Advanced DataGridView with Excel-like auto filter: Windows Forms DataGridView Control with Excel-Like auto-filter context menu Windows Forms DataGridView ??????? ? Excel-???????? ????-????????azure media services admin panel: Simple azure media services dashboard. Upload media assets, queue encoder tasks and stream your audio\video assets.BackupCleaner.Net: A C#.Net-based tool for automatically removing old backups selectively. It can be used when you already make daily backups on disk, and want to clean them up while still keeping some of the ones made weeks, months or years ago.Bible Lib: BibleLib is a .net compatible library containing information for books, chapters and verses in the Old Testament.CRM 4.0 to CRM 2011 Queues Upgrades: for more information and documentation, please refer to http://mayankp.wordpress.com/2012/05/25/crm-4-0-to-crm-2011-queues-upgrades/ CSV File Reader and Writer for .NET: C# classes for reading and writing CSV files. Support for multi-line fields, custom delimiter and quote characters, options for how empty lines are handled.DotNetNuke Boards: DNN Boards is a task management solution that allows each user to have their own task board or social group members can collaborate within a single board.FarmaciasCruzAzul: Sistema Cruz AzulFindValueInDatabase: This solution finds the value you input in the hole given database and tells you which columns of which tables have the value you are looking for.Fish Tank: Social networking site for Aquarium enthusiasts.GSBA Apps: GSBA App for Windows 8Heuristics for the Vehicle Routing Problem: This is the code for our class, IEMS 482.Icaro - UPN: Icaro UPN es la recopilación de todos los preyectos realizados en clases de los diferentes proyectos que Enseño, espero les Sirva.JSLogger - free logging library for JavaScript: JSLogger is a free JavaScript Library for log information during the duration of your client script. The target is very easy >>Find every javasvript error<<Just little strategy: Just little strategy writen in C# using XNA Game Studio Now under developmentLightweight Medata Reader: The Lightweight Metadata Reader (LMR) is a tooling friendly version of the CLR Reflection APIs that takes no dependency on the CLR Loader.My Solution: No description for it nowoden????: ???????????????^^ooaavee.net: TODOPath Splitter: Path Splitter uses Roslyn to convert a method into a set of methods each equivalent to a distinct execution path. Assume annotations are added for use with Pex.Planning Poker for Azure: Planning Poker application allows distributed teams to play planning poker just using web browser. It can be deployed to IIS or Azure cloud service.plasmatrim.net: A library for controlling the USB PlasmaTrim from a .net application.powersaver: A simple utility, which will turn off your monitor when you lock your work station.Project13251008: gterProject13261008: asdsaProject13271008: sdfPyfus Reload: Server-side framework for Dofus 1.29.1 gameRei do Biscuit: E-commerce do rei do biscuitSofire Suite v1.6: Sofire Suite v1.6Sofire XSql: Sofire XSqlSosa Analysis Module (SAM): Numerical Analysis and data visualization program for SOSA psychological experiment software.SyncProject: The summary is coming soon... Just be patient ! Tistory Syntax Highlighter: ???? SyntaxHighlighter ????TJBHJJ: this is a website for company!tricogol App: nonetuts: My first SVNWatchr Change Control Management: Change control management for development and administrative teams focused on lean or agile processes.WCF Simple multi chat: This is a simple Windows form application that it's like a 'chat room'. Multiple users can login and chat with others users. The chat's core is powered by WCFWindows Event Log Email Notification: This will read the windows event logs based on the supplied xpath filters and email the specified addresses if there are matches.

    Read the article

  • Down Tools Week Cometh: Kissing Goodbye to CVs/Resumes and Cover Letters

    - by Bart Read
    I haven't blogged about what I'm doing in my (not so new) temporary role as Red Gate's technical recruiter, mostly because it's been routine, business as usual stuff, and because I've been trying to understand the role by doing it. I think now though the time has come to get a little more radical, so I'm going to tell you why I want to largely eliminate CVs/resumes and cover letters from the application process for some of our technical roles, and why I think that might be a good thing for candidates (and for us). I have a terrible confession to make, or at least it's a terrible confession for a recruiter: I don't really like CV sifting, or reading cover letters, and, unless I've misread the mood around here, neither does anybody else. It's dull, it's time-consuming, and it's somewhat soul destroying because, when all is said and done, you're being paid to be incredibly judgemental about people based on relatively little information. I feel like I've dirtied myself by saying that - I mean, after all, it's a core part of my job - but it sucks, it really does. (And, of course, the truth is I'm still a software engineer at heart, and I'm always looking for ways to do things better.) On the flip side, I've never met anyone who likes writing their CV. It takes hours and hours of faffing around and massaging it into shape, and the whole process is beset by a gnawing anxiety, frustration, and insecurity. All you really want is a chance to demonstrate your skills - not just talk about them - and how do you do that in a CV or cover letter? Often the best candidates will include samples of their work (a portfolio, screenshots, links to websites, product downloads, etc.), but sometimes this isn't possible, or may not be appropriate, or you just don't think you're allowed because of what your school/university careers service has told you (more commonly an issue with grads, obviously). And what are we actually trying to find out about people with all of this? I think the common criteria are actually pretty basic: Smart Gets things done (thanks for these two Joel) Not an a55hole* (sorry, have to get around Simple Talk's swear filter - and thanks to Professor Robert I. Sutton for this one) *Of course, everyone has off days, and I don't honestly think we're too worried about somebody being a bit grumpy every now and again. We can do a bit better than this in the context of the roles I'm talking about: we can be more specific about what "gets things done" means, at least in part. For software engineers and interns, the non-exhaustive meaning of "gets things done" is: Excellent coder For test engineers, the non-exhaustive meaning of "gets things done" is: Good at finding problems in software Competent coder Team player, etc., to me, are covered by "not an a55hole". I don't expect people to be the life and soul of the party, or a wild extrovert - that's not what team player means, and it's not what "not an a55hole" means. Some of our best technical staff are quiet, introverted types, but they're still pleasant to work with. My problem is that I don't think the initial sift really helps us find out whether people are smart and get things done with any great efficacy. It's better than nothing, for sure, but it's not as good as it could be. It's also contentious, and potentially unfair/inequitable - if you want to get an idea of what I mean by this, check out the background information section at the bottom. Before I go any further, let's look at the Red Gate recruitment process for technical staff* as it stands now: (LOTS of) People apply for jobs. All these applications go through a brutal process of manual sifting, which eliminates between 75 and 90% of them, depending upon the role, and the time of year**. Depending upon the role, those who pass the sift will be sent an assessment or telescreened. For the purposes of this blog post I'm only interested in those that are sent some sort of programming assessment, or bug hunt. This means software engineers, test engineers, and software interns, which are the roles for which I receive the most applications. The telescreen tends to be reserved for project or product managers. Those that pass the assessment are invited in for first interview. This interview is mostly about assessing their technical skills***, although we're obviously on the look out for cultural fit red flags as well. If the first interview goes well we'll invite candidates back for a second interview. This is where team/cultural fit is really scoped out. We also use this interview to dive more deeply into certain areas of their skillset, and explore any concerns that may have come out of the first interview (these obviously won't have been serious or obvious enough to cause a rejection at that point, but are things we do need to look into before we'd consider making an offer). We might subsequently invite them in for lunch before we make them an offer. This tends to happen when we're recruiting somebody for a specific team and we'd like them to meet all the people they'll be working with directly. It's not an interview per se, but can prove pivotal if they don't gel with the team. Anyone who's made it this far will receive an offer from us. *We have a slightly quirky definition of "technical staff" as it relates to the technical recruiter role here. It includes software engineers, test engineers, software interns, user experience specialists, technical authors, project managers, product managers, and development managers, but does not include product support or information systems roles. **For example, the quality of graduate applicants overall noticeably drops as the academic year wears on, which is not to say that by now there aren't still stars in there, just that they're fewer and further between. ***Some organisations prefer to assess for team fit first, but I think assessing technical skills is a more effective initial filter - if they're the nicest person in the world, but can't cut a line of code they're not going to work out. Now, as I suggested in the title, Red Gate's Down Tools Week is upon us once again - next week in fact - and I had proposed as a project that we refactor and automate the first stage of marking our programming assessments. Marking assessments, and in fact organising the marking of them, is a somewhat time-consuming process, and we receive many assessment solutions that just don't make the cut, for whatever reason. Whilst I don't think it's possible to fully automate marking, I do think it ought to be possible to run a suite of automated tests over each candidate's solution to see whether or not it behaves correctly and, if it does, move on to a manual stage where we examine the code for structure, decomposition, style, readability, maintainability, etc. Obviously it's possible to use tools to generate potentially helpful metrics for some of these indices as well. This would obviously reduce the marking workload, and would provide candidates with quicker feedback about whether they've been successful - though I do wonder if waiting a tactful interval before sending a (nicely written) rejection might be wise. I duly scrawled out a picture of my ideal process, which looked like this: The problem is, as soon as I'd roughed it out, I realised that fundamentally it wasn't an ideal process at all, which explained the gnawing feeling of cognitive dissonance I'd been wrestling with all week, whilst I'd been trying to find time to do this. Here's what I mean. Automated assessment marking, and the associated infrastructure around that, makes it much easier for us to deal with large numbers of assessments. This means we can be much more permissive about who we send assessments out to or, in other words, we can give more candidates the opportunity to really demonstrate their skills to us. And this leads to a question: why not give everyone the opportunity to demonstrate their skills, to show that they're smart and can get things done? (Two or three of us even discussed this in the down tools week hustings earlier this week.) And isn't this a lot simpler than the alternative we'd been considering? (FYI, this was automated CV/cover letter sifting by some form of textual analysis to ideally eliminate the worst 50% or so of applications based on an analysis of the 20,000 or so historical applications we've received since 2007 - definitely not the basic keyword analysis beloved of recruitment agencies, since this would eliminate hardly anyone who was awful, but definitely would eliminate stellar Oxbridge candidates - #fail - or some nightmarishly complex Google-like system where we profile all our currently employees, only to realise that we're never going to get representative results because we don't have a statistically significant sample size in any given role - also #fail.) No, I think the new way is better. We let people self-select. We make them the masters (or mistresses) of their own destiny. We give applicants the power - we put their fate in their hands - by giving them the chance to demonstrate their skills, which is what they really want anyway, instead of requiring that they spend hours and hours creating a CV and cover letter that I'm going to evaluate for suitability, and make a value judgement about, in approximately 1 minute (give or take). It doesn't matter what university you attended, it doesn't matter if you had a bad year when you took your A-levels - here's your chance to shine, so take it and run with it. (As a side benefit, we cut the number of applications we have to sift by something like two thirds.) WIN! OK, yeah, sounds good, but will it actually work? That's an excellent question. My gut feeling is yes, and I'll justify why below (and hopefully have gone some way towards doing that above as well), but what I'm proposing here is really that we run an experiment for a period of time - probably a couple of months or so - and measure the outcomes we see: How many people apply? (Wouldn't be surprised or alarmed to see this cut by a factor of ten.) How many of them submit a good assessment? (More/less than at present?) How much overhead is there for us in dealing with these assessments compared to now? What are the success and failure rates at each interview stage compared to now? How many people are we hiring at the end of it compared to now? I think it'll work because I hypothesize that, amongst other things: It self-selects for people who really want to work at Red Gate which, at the moment, is something I have to try and assess based on their CV and cover letter - but if you're not that bothered about working here, why would you complete the assessment? Candidates who would submit a shoddy application probably won't feel motivated to do the assessment. Candidates who would demonstrate good attention to detail in their CV/cover letter will demonstrate good attention to detail in the assessment. In general, only the better candidates will complete and submit the assessment. Marking assessments is much less work so we'll be able to deal with any increase that we see (hopefully we will see). There are obviously other questions as well: Is plagiarism going to be a problem? Is there any way we can detect/discourage potential plagiarism? How do we assess candidates' education and experience? What about their ability to communicate in writing? Do we still want them to submit a CV afterwards if they pass assessment? Do we want to offer them the opportunity to tell us a bit about why they'd like the job when they submit their assessment? How does this affect our relationship with recruitment agencies we might use to hire for these roles? So, what's the objective for next week's Down Tools Week? Pretty simple really - we want to implement this process for the Graduate Software Engineer and Software Engineer positions that you can find on our website. I will be joined by a crack team of our best developers (Kevin Boyle, and new Red-Gater, Sam Blackburn), and recruiting hostess with the mostest Laura McQuillen, and hopefully a couple of others as well - if I can successfully twist more arms before Monday.* Hopefully by next Friday our experiment will be up and running, and we may have changed the way Red Gate recruits software engineers for good! Stay tuned and we'll let you know how it goes! *I'm going to play dirty by offering them beer and chocolate during meetings. Some background information: how agonising over the initial CV/cover letter sift helped lead us to bin it off entirely The other day I was agonising about the new university/good degree grade versus poor A-level results issue, and decided to canvas for other opinions to see if there was something I could do that was fairer than my current approach, which is almost always to reject. This generated quite an involved discussion on our Yammer site: I'm sure you can glean a pretty good impression of my own educational prejudices from that discussion as well, although I'm very open to changing my opinion - hopefully you've already figured that out from reading the rest of this post. Hopefully you can also trace a logical path from agonising about sifting to, "Uh, hang on, why on earth are we doing this anyway?!?" Technorati Tags: recruitment,hr,developers,testers,red gate,cv,resume,cover letter,assessment,sea change

    Read the article

  • .NET Code Evolution

    - by Alois Kraus
    Originally posted on: http://geekswithblogs.net/akraus1/archive/2013/07/24/153504.aspxAt my day job I do look at a lot of code written by other people. Most of the code is quite good and some is even a masterpiece. And there is also code which makes you think WTF… oh it was written by me. Hm not so bad after all. There are many excuses reasons for bad code. Most often it is time pressure followed by not enough ambition (who cares) or insufficient training. Normally I do care about code quality quite a lot which makes me a (perceived) slow worker who does write many tests and refines the code quite a lot because of the design deficiencies. Most of the deficiencies I do find by putting my design under stress while checking for invariants. It does also help a lot to step into the code with a debugger (sometimes also Windbg). I do this much more often when my tests are red. That way I do get a much better understanding what my code really does and not what I think it should be doing. This time I do want to show you how code can evolve over the years with different .NET Framework versions. Once there was  time where .NET 1.1 was new and many C++ programmers did switch over to get rid of not initialized pointers and memory leaks. There were also nice new data structures available such as the Hashtable which is fast lookup table with O(1) time complexity. All was good and much code was written since then. At 2005 a new version of the .NET Framework did arrive which did bring many new things like generics and new data structures. The “old” fashioned way of Hashtable were coming to an end and everyone used the new Dictionary<xx,xx> type instead which was type safe and faster because the object to type conversion (aka boxing) was no longer necessary. I think 95% of all Hashtables and dictionaries use string as key. Often it is convenient to ignore casing to make it easy to look up values which the user did enter. An often followed route is to convert the string to upper case before putting it into the Hashtable. Hashtable Table = new Hashtable(); void Add(string key, string value) { Table.Add(key.ToUpper(), value); } This is valid and working code but it has problems. First we can pass to the Hashtable a custom IEqualityComparer to do the string matching case insensitive. Second we can switch over to the now also old Dictionary type to become a little faster and we can keep the the original keys (not upper cased) in the dictionary. Dictionary<string, string> DictTable = new Dictionary<string, string>(StringComparer.OrdinalIgnoreCase); void AddDict(string key, string value) { DictTable.Add(key, value); } Many people do not user the other ctors of Dictionary because they do shy away from the overhead of writing their own comparer. They do not know that .NET has for strings already predefined comparers at hand which you can directly use. Today in the many core area we do use threads all over the place. Sometimes things break in subtle ways but most of the time it is sufficient to place a lock around the offender. Threading has become so mainstream that it may sound weird that in the year 2000 some guy got a huge incentive for the idea to reduce the time to process calibration data from 12 hours to 6 hours by using two threads on a dual core machine. Threading does make it easy to become faster at the expense of correctness. Correct and scalable multithreading can be arbitrarily hard to achieve depending on the problem you are trying to solve. Lets suppose we want to process millions of items with two threads and count the processed items processed by all threads. A typical beginners code might look like this: int Counter; void IJustLearnedToUseThreads() { var t1 = new Thread(ThreadWorkMethod); t1.Start(); var t2 = new Thread(ThreadWorkMethod); t2.Start(); t1.Join(); t2.Join(); if (Counter != 2 * Increments) throw new Exception("Hmm " + Counter + " != " + 2 * Increments); } const int Increments = 10 * 1000 * 1000; void ThreadWorkMethod() { for (int i = 0; i < Increments; i++) { Counter++; } } It does throw an exception with the message e.g. “Hmm 10.222.287 != 20.000.000” and does never finish. The code does fail because the assumption that Counter++ is an atomic operation is wrong. The ++ operator is just a shortcut for Counter = Counter + 1 This does involve reading the counter from a memory location into the CPU, incrementing value on the CPU and writing the new value back to the memory location. When we do look at the generated assembly code we will see only inc dword ptr [ecx+10h] which is only one instruction. Yes it is one instruction but it is not atomic. All modern CPUs have several layers of caches (L1,L2,L3) which try to hide the fact how slow actual main memory accesses are. Since cache is just another word for redundant copy it can happen that one CPU does read a value from main memory into the cache, modifies it and write it back to the main memory. The problem is that at least the L1 cache is not shared between CPUs so it can happen that one CPU does make changes to values which did change in meantime in the main memory. From the exception you can see we did increment the value 20 million times but half of the changes were lost because we did overwrite the already changed value from the other thread. This is a very common case and people do learn to protect their  data with proper locking.   void Intermediate() { var time = Stopwatch.StartNew(); Action acc = ThreadWorkMethod_Intermediate; var ar1 = acc.BeginInvoke(null, null); var ar2 = acc.BeginInvoke(null, null); ar1.AsyncWaitHandle.WaitOne(); ar2.AsyncWaitHandle.WaitOne(); if (Counter != 2 * Increments) throw new Exception(String.Format("Hmm {0:N0} != {1:N0}", Counter, 2 * Increments)); Console.WriteLine("Intermediate did take: {0:F1}s", time.Elapsed.TotalSeconds); } void ThreadWorkMethod_Intermediate() { for (int i = 0; i < Increments; i++) { lock (this) { Counter++; } } } This is better and does use the .NET Threadpool to get rid of manual thread management. It does give the expected result but it can result in deadlocks because you do lock on this. This is in general a bad idea since it can lead to deadlocks when other threads use your class instance as lock object. It is therefore recommended to create a private object as lock object to ensure that nobody else can lock your lock object. When you read more about threading you will read about lock free algorithms. They are nice and can improve performance quite a lot but you need to pay close attention to the CLR memory model. It does make quite weak guarantees in general but it can still work because your CPU architecture does give you more invariants than the CLR memory model. For a simple counter there is an easy lock free alternative present with the Interlocked class in .NET. As a general rule you should not try to write lock free algos since most likely you will fail to get it right on all CPU architectures. void Experienced() { var time = Stopwatch.StartNew(); Task t1 = Task.Factory.StartNew(ThreadWorkMethod_Experienced); Task t2 = Task.Factory.StartNew(ThreadWorkMethod_Experienced); t1.Wait(); t2.Wait(); if (Counter != 2 * Increments) throw new Exception(String.Format("Hmm {0:N0} != {1:N0}", Counter, 2 * Increments)); Console.WriteLine("Experienced did take: {0:F1}s", time.Elapsed.TotalSeconds); } void ThreadWorkMethod_Experienced() { for (int i = 0; i < Increments; i++) { Interlocked.Increment(ref Counter); } } Since time does move forward we do not use threads explicitly anymore but the much nicer Task abstraction which was introduced with .NET 4 at 2010. It is educational to look at the generated assembly code. The Interlocked.Increment method must be called which does wondrous things right? Lets see: lock inc dword ptr [eax] The first thing to note that there is no method call at all. Why? Because the JIT compiler does know very well about CPU intrinsic functions. Atomic operations which do lock the memory bus to prevent other processors to read stale values are such things. Second: This is the same increment call prefixed with a lock instruction. The only reason for the existence of the Interlocked class is that the JIT compiler can compile it to the matching CPU intrinsic functions which can not only increment by one but can also do an add, exchange and a combined compare and exchange operation. But be warned that the correct usage of its methods can be tricky. If you try to be clever and look a the generated IL code and try to reason about its efficiency you will fail. Only the generated machine code counts. Is this the best code we can write? Perhaps. It is nice and clean. But can we make it any faster? Lets see how good we are doing currently. Level Time in s IJustLearnedToUseThreads Flawed Code Intermediate 1,5 (lock) Experienced 0,3 (Interlocked.Increment) Master 0,1 (1,0 for int[2]) That lock free thing is really a nice thing. But if you read more about CPU cache, cache coherency, false sharing you can do even better. int[] Counters = new int[12]; // Cache line size is 64 bytes on my machine with an 8 way associative cache try for yourself e.g. 64 on more modern CPUs void Master() { var time = Stopwatch.StartNew(); Task t1 = Task.Factory.StartNew(ThreadWorkMethod_Master, 0); Task t2 = Task.Factory.StartNew(ThreadWorkMethod_Master, Counters.Length - 1); t1.Wait(); t2.Wait(); Counter = Counters[0] + Counters[Counters.Length - 1]; if (Counter != 2 * Increments) throw new Exception(String.Format("Hmm {0:N0} != {1:N0}", Counter, 2 * Increments)); Console.WriteLine("Master did take: {0:F1}s", time.Elapsed.TotalSeconds); } void ThreadWorkMethod_Master(object number) { int index = (int) number; for (int i = 0; i < Increments; i++) { Counters[index]++; } } The key insight here is to use for each core its own value. But if you simply use simply an integer array of two items, one for each core and add the items at the end you will be much slower than the lock free version (factor 3). Each CPU core has its own cache line size which is something in the range of 16-256 bytes. When you do access a value from one location the CPU does not only fetch one value from main memory but a complete cache line (e.g. 16 bytes). This means that you do not pay for the next 15 bytes when you access them. This can lead to dramatic performance improvements and non obvious code which is faster although it does have many more memory reads than another algorithm. So what have we done here? We have started with correct code but it was lacking knowledge how to use the .NET Base Class Libraries optimally. Then we did try to get fancy and used threads for the first time and failed. Our next try was better but it still had non obvious issues (lock object exposed to the outside). Knowledge has increased further and we have found a lock free version of our counter which is a nice and clean way which is a perfectly valid solution. The last example is only here to show you how you can get most out of threading by paying close attention to your used data structures and CPU cache coherency. Although we are working in a virtual execution environment in a high level language with automatic memory management it does pay off to know the details down to the assembly level. Only if you continue to learn and to dig deeper you can come up with solutions no one else was even considering. I have studied particle physics which does help at the digging deeper part. Have you ever tried to solve Quantum Chromodynamics equations? Compared to that the rest must be easy ;-). Although I am no longer working in the Science field I take pride in discovering non obvious things. This can be a very hard to find bug or a new way to restructure data to make something 10 times faster. Now I need to get some sleep ….

    Read the article

  • Parsing Concerns

    - by Jesse
    If you’ve ever written an application that accepts date and/or time inputs from an external source (a person, an uploaded file, posted XML, etc.) then you’ve no doubt had to deal with parsing some text representing a date into a data structure that a computer can understand. Similarly, you’ve probably also had to take values from those same data structure and turn them back into their original formats. Most (all?) suitably modern development platforms expose some kind of parsing and formatting functionality for turning text into dates and vice versa. In .NET, the DateTime data structure exposes ‘Parse’ and ‘ToString’ methods for this purpose. This post will focus mostly on parsing, though most of the examples and suggestions below can also be applied to the ToString method. The DateTime.Parse method is pretty permissive in the values that it will accept (though apparently not as permissive as some other languages) which makes it pretty easy to take some text provided by a user and turn it into a proper DateTime instance. Here are some examples (note that the resulting DateTime values are shown using the RFC1123 format): DateTime.Parse("3/12/2010"); //Fri, 12 Mar 2010 00:00:00 GMT DateTime.Parse("2:00 AM"); //Sat, 01 Jan 2011 02:00:00 GMT (took today's date as date portion) DateTime.Parse("5-15/2010"); //Sat, 15 May 2010 00:00:00 GMT DateTime.Parse("7/8"); //Fri, 08 Jul 2011 00:00:00 GMT DateTime.Parse("Thursday, July 1, 2010"); //Thu, 01 Jul 2010 00:00:00 GMT Dealing With Inaccuracy While the DateTime struct has the ability to store a date and time value accurate down to the millisecond, most date strings provided by a user are not going to specify values with that much precision. In each of the above examples, the Parse method was provided a partial value from which to construct a proper DateTime. This means it had to go ahead and assume what you meant and fill in the missing parts of the date and time for you. This is a good thing, especially when we’re talking about taking input from a user. We can’t expect that every person using our software to provide a year, day, month, hour, minute, second, and millisecond every time they need to express a date. That said, it’s important for developers to understand what assumptions the software might be making and plan accordingly. I think the assumptions that were made in each of the above examples were pretty reasonable, though if we dig into this method a little bit deeper we’ll find that there are a lot more assumptions being made under the covers than you might have previously known. One of the biggest assumptions that the DateTime.Parse method has to make relates to the format of the date represented by the provided string. Let’s consider this example input string: ‘10-02-15’. To some people. that might look like ‘15-Feb-2010’. To others, it might be ‘02-Oct-2015’. Like many things, it depends on where you’re from. This Is America! Most cultures around the world have adopted a “little-endian” or “big-endian” formats. (Source: Date And Time Notation By Country) In this context,  a “little-endian” date format would list the date parts with the least significant first while the “big-endian” date format would list them with the most significant first. For example, a “little-endian” date would be “day-month-year” and “big-endian” would be “year-month-day”. It’s worth nothing here that ISO 8601 defines a “big-endian” format as the international standard. While I personally prefer “big-endian” style date formats, I think both styles make sense in that they follow some logical standard with respect to ordering the date parts by their significance. Here in the United States, however, we buck that trend by using what is, in comparison, a completely nonsensical format of “month/day/year”. Almost no other country in the world uses this format. I’ve been fortunate in my life to have done some international travel, so I’ve been aware of this difference for many years, but never really thought much about it. Until recently, I had been developing software for exclusively US-based audiences and remained blissfully ignorant of the different date formats employed by other countries around the world. The web application I work on is being rolled out to users in different countries, so I was recently tasked with updating it to support different date formats. As it turns out, .NET has a great mechanism for dealing with different date formats right out of the box. Supporting date formats for different cultures is actually pretty easy once you understand this mechanism. Pulling the Curtain Back On the Parse Method Have you ever taken a look at the different flavors (read: overloads) that the DateTime.Parse method comes in? In it’s simplest form, it takes a single string parameter and returns the corresponding DateTime value (if it can divine what the date value should be). You can optionally provide two additional parameters to this method: an ‘System.IFormatProvider’ and a ‘System.Globalization.DateTimeStyles’. Both of these optional parameters have some bearing on the assumptions that get made while parsing a date, but for the purposes of this article I’m going to focus on the ‘System.IFormatProvider’ parameter. The IFormatProvider exposes a single method called ‘GetFormat’ that returns an object to be used for determining the proper format for displaying and parsing things like numbers and dates. This interface plays a big role in the globalization capabilities that are built into the .NET Framework. The cornerstone of these globalization capabilities can be found in the ‘System.Globalization.CultureInfo’ class. To put it simply, the CultureInfo class is used to encapsulate information related to things like language, writing system, and date formats for a certain culture. Support for many cultures are “baked in” to the .NET Framework and there is capacity for defining custom cultures if needed (thought I’ve never delved into that). While the details of the CultureInfo class are beyond the scope of this post, so for now let me just point out that the CultureInfo class implements the IFormatInfo interface. This means that a CultureInfo instance created for a given culture can be provided to the DateTime.Parse method in order to tell it what date formats it should expect. So what happens when you don’t provide this value? Let’s crack this method open in Reflector: When no IFormatInfo parameter is provided (i.e. we use the simple DateTime.Parse(string) overload), the ‘DateTimeFormatInfo.CurrentInfo’ is used instead. Drilling down a bit further we can see the implementation of the DateTimeFormatInfo.CurrentInfo property: From this property we can determine that, in the absence of an IFormatProvider being specified, the DateTime.Parse method will assume that the provided date should be treated as if it were in the format defined by the CultureInfo object that is attached to the current thread. The culture specified by the CultureInfo instance on the current thread can vary depending on several factors, but if you’re writing an application where a single instance might be used by people from different cultures (i.e. a web application with an international user base), it’s important to know what this value is. Having a solid strategy for setting the current thread’s culture for each incoming request in an internationally used ASP .NET application is obviously important, and might make a good topic for a future post. For now, let’s think about what the implications of not having the correct culture set on the current thread. Let’s say you’re running an ASP .NET application on a server in the United States. The server was setup by English speakers in the United States, so it’s configured for US English. It exposes a web page where users can enter order data, one piece of which is an anticipated order delivery date. Most users are in the US, and therefore enter dates in a ‘month/day/year’ format. The application is using the DateTime.Parse(string) method to turn the values provided by the user into actual DateTime instances that can be stored in the database. This all works fine, because your users and your server both think of dates in the same way. Now you need to support some users in South America, where a ‘day/month/year’ format is used. The best case scenario at this point is a user will enter March 13, 2011 as ‘25/03/2011’. This would cause the call to DateTime.Parse to blow up since that value doesn’t look like a valid date in the US English culture (Note: In all likelihood you might be using the DateTime.TryParse(string) method here instead, but that method behaves the same way with regard to date formats). “But wait a minute”, you might be saying to yourself, “I thought you said that this was the best case scenario?” This scenario would prevent users from entering orders in the system, which is bad, but it could be worse! What if the order needs to be delivered a day earlier than that, on March 12, 2011? Now the user enters ‘12/03/2011’. Now the call to DateTime.Parse sees what it thinks is a valid date, but there’s just one problem: it’s not the right date. Now this order won’t get delivered until December 3, 2011. In my opinion, that kind of data corruption is a much bigger problem than having the Parse call fail. What To Do? My order entry example is a bit contrived, but I think it serves to illustrate the potential issues with accepting date input from users. There are some approaches you can take to make this easier on you and your users: Eliminate ambiguity by using a graphical date input control. I’m personally a fan of a jQuery UI Datepicker widget. It’s pretty easy to setup, can be themed to match the look and feel of your site, and has support for multiple languages and cultures. Be sure you have a way to track the culture preference of each user in your system. For a web application this could be done using something like a cookie or session state variable. Ensure that the current user’s culture is being applied correctly to DateTime formatting and parsing code. This can be accomplished by ensuring that each request has the handling thread’s CultureInfo set properly, or by using the Format and Parse method overloads that accept an IFormatProvider instance where the provided value is a CultureInfo object constructed using the current user’s culture preference. When in doubt, favor formats that are internationally recognizable. Using the string ‘2010-03-05’ is likely to be recognized as March, 5 2011 by users from most (if not all) cultures. Favor standard date format strings over custom ones. So far we’ve only talked about turning a string into a DateTime, but most of the same “gotchas” apply when doing the opposite. Consider this code: someDateValue.ToString("MM/dd/yyyy"); This will output the same string regardless of what the current thread’s culture is set to (with the exception of some cultures that don’t use the Gregorian calendar system, but that’s another issue all together). For displaying dates to users, it would be better to do this: someDateValue.ToString("d"); This standard format string of “d” will use the “short date format” as defined by the culture attached to the current thread (or provided in the IFormatProvider instance in the proper method overload). This means that it will honor the proper month/day/year, year/month/day, or day/month/year format for the culture. Knowing Your Audience The examples and suggestions shown above can go a long way toward getting an application in shape for dealing with date inputs from users in multiple cultures. There are some instances, however, where taking approaches like these would not be appropriate. In some cases, the provider or consumer of date values that pass through your application are not people, but other applications (or other portions of your own application). For example, if your site has a page that accepts a date as a query string parameter, you’ll probably want to format that date using invariant date format. Otherwise, the same URL could end up evaluating to a different page depending on the user that is viewing it. In addition, if your application exports data for consumption by other systems, it’s best to have an agreed upon format that all systems can use and that will not vary depending upon whether or not the users of the systems on either side prefer a month/day/year or day/month/year format. I’ll look more at some approaches for dealing with these situations in a future post. If you take away one thing from this post, make it an understanding of the importance of knowing where the dates that pass through your system come from and are going to. You will likely want to vary your parsing and formatting approach depending on your audience.

    Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >