Search Results

Search found 6030 results on 242 pages for 'quick poll'.

Page 228/242 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Why is my mdadm raid-1 recovery so slow?

  - by dimmer

  On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

  Read the article

• JUnit testing, exception in threa main

  - by Crystal

  I am new to JUnit and am trying to follow my prof's example. I have a Person class and a PersonTest class. When I try to compile PersonTest.java, I get the following error: Exception in thread "main" java.lang.NoSuchMethodError: main I am not really sure why since I followed his example. Person.java public class Person implements Comparable { String firstName; String lastName; String telephone; String email; public Person() { firstName = ""; lastName = ""; telephone = ""; email = ""; } public Person(String firstName) { this.firstName = firstName; } public Person(String firstName, String lastName, String telephone, String email) { this.firstName = firstName; this.lastName = lastName; this.telephone = telephone; this.email = email; } public String getFirstName() { return firstName; } public void setFirstName(String firstName) { this.firstName = firstName; } public String getLastName() { return lastName; } public void setLastName(String lastName) { this.lastName = lastName; } public String getTelephone() { return telephone; } public void setTelephone(String telephone) { this.telephone = telephone; } public String getEmail() { return email; } public void setEmail(String email) { this.email = email; } public int compareTo(Object o) { String s1 = this.lastName + this.firstName; String s2 = ((Person) o).lastName + ((Person) o).firstName; return s1.compareTo(s2); } public boolean equals(Object otherObject) { // a quick test to see if the objects are identical if (this == otherObject) { return true; } // must return false if the explicit parameter is null if (otherObject == null) { return false; } if (!(otherObject instanceof Person)) { return false; } Person other = (Person) otherObject; return firstName.equals(other.firstName) && lastName.equals(other.lastName) && telephone.equals(other.telephone) && email.equals(other.email); } public int hashCode() { return this.email.toLowerCase().hashCode(); } public String toString() { return getClass().getName() + "[firstName = " + firstName + '\n' + "lastName = " + lastName + '\n' + "telephone = " + telephone + '\n' + "email = " + email + "]"; } } PersonTest.java import org.junit.Test; // JDK 5.0 annotation support import static org.junit.Assert.assertTrue; // Using JDK 5.0 static imports import static org.junit.Assert.assertFalse; // Using JDK 5.0 static imports import junit.framework.JUnit4TestAdapter; // Need this to be compatible with old test driver public class PersonTest { /** A test to verify equals method. */ @Test public void checkEquals() { Person p1 = new Person("jj", "aa", "[email protected]", "1112223333"); assertTrue(p1.equals(p1)); // first check in equals method assertFalse(p1.equals(null)); // second check in equals method assertFalse(p1.equals(new Object())); // third chk in equals method Person p2 = new Person("jj", "aa", "[email protected]", "1112223333"); assertTrue(p1.equals(p2)); // check for deep comparison p1 = new Person("jj", "aa", "[email protected]", "1112223333"); p2 = new Person("kk", "aa", "[email protected]", "1112223333"); assertFalse(p1.equals(p2)); // check for deep comkparison } }

  Read the article

• How can I get SQL Server transactions to use record-level locks?

  - by Joe White

  We have an application that was originally written as a desktop app, lo these many years ago. It starts a transaction whenever you open an edit screen, and commits if you click OK, or rolls back if you click Cancel. This worked okay for a desktop app, but now we're trying to move to ADO.NET and SQL Server, and the long-running transactions are problematic. I found that we'll have a problem when multiple users are all trying to edit (different subsets of) the same table at the same time. In our old database, each user's transaction would acquire record-level locks to every record they modified during their transaction; since different users were editing different records, everyone gets their own locks and everything works. But in SQL Server, as soon as one user edits a record inside a transaction, SQL Server appears to get a lock on the entire table. When a second user tries to edit a different record in the same table, the second user's app simply locks up, because the SqlConnection blocks until the first user either commits or rolls back. I'm aware that long-running transactions are bad, and I know that the best solution would be to change these screens so that they no longer keep transactions open for a long time. But since that would mean some invasive and risky changes, I also want to research whether there's a way to get this code up and running as-is, just so I know what my options are. How can I get two different users' transactions in SQL Server to lock individual records instead of the entire table? Here's a quick-and-dirty console app that illustrates the issue. I've created a database called "test1", with one table called "Values" that just has ID (int) and Value (nvarchar) columns. If you run the app, it asks for an ID to modify, starts a transaction, modifies that record, and then leaves the transaction open until you press ENTER. I want to be able to start the program and tell it to update ID 1; let it get its transaction and modify the record; start a second copy of the program and tell it to update ID 2; have it able to update (and commit) while the first app's transaction is still open. Currently it freezes at step 4, until I go back to the first copy of the app and close it or press ENTER so it commits. The call to command.ExecuteNonQuery blocks until the first connection is closed. public static void Main() { Console.Write("ID to update: "); var id = int.Parse(Console.ReadLine()); Console.WriteLine("Starting transaction"); using (var scope = new TransactionScope()) using (var connection = new SqlConnection(@"Data Source=localhost\sqlexpress;Initial Catalog=test1;Integrated Security=True")) { connection.Open(); var command = connection.CreateCommand(); command.CommandText = "UPDATE [Values] SET Value = 'Value' WHERE ID = " + id; Console.WriteLine("Updating record"); command.ExecuteNonQuery(); Console.Write("Press ENTER to end transaction: "); Console.ReadLine(); scope.Complete(); } } Here are some things I've already tried, with no change in behavior: Changing the transaction isolation level to "read uncommitted" Specifying a "WITH (ROWLOCK)" on the UPDATE statement

  Read the article

• Why is the this-pointer needed to access inherited attributes?

  - by Shadow

  Hi, assume the following class is given: class Base{ public: Base() {} Base( const Base& b) : base_attr(b.base_attr) {} void someBaseFunction() { .... } protected: SomeType base_attr; }; When I want a class to inherit from this one and include a new attribute for the derived class, I would write: class Derived: public Base { public: Derived() {} Derived( const Derived& d ) : derived_attr(d.derived_attr) { this->base_attr = d.base_attr; } void SomeDerivedFunction() { .... } private: SomeOtherType derived_attr; }; This works for me (let's ignore eventually missing semicolons or such please). However, when I remove the "this-" in the copy constructor of the derived class, the compiler complains that "'base_attr' was not declared in this scope". I thought that, when inheriting from a class, the protected attributes would then also be accessible directly. I did not know that the "this-" pointer was needed. I am now confused if it is actually correct what I am doing there, especially the copy-constructor of the Derived-class. Because each Derived object is supposed to have a base_attr and a derived_attr and they obviously need to be initialized/set correctly. And because Derived is inheriting from Base, I don't want to explicitly include an attribute named "base_attr" in the Derived-class. IMHO doing so would generally destroy the idea behind inheritance, as everything would have to be defined again. EDIT Thank you all for the quick answers. I completely forgot the fact that the classes actually are templates. Please, see the new examples below, which are actually compiling when including "this-" and are failing when omiting "this-" in the copy-constructor of the Derived-class: Base-class: #include <iostream> template<class T> class Base{ public: Base() : base_attr(0) {} Base( const Base& b) : base_attr(b.base_attr) {} void baseIncrement() { ++base_attr; } void printAttr() { std::cout << "Base Attribute: " << base_attr << std::endl; } protected: T base_attr; }; Derived-class: #include "base.hpp" template< class T > class Derived: public Base<T>{ public: Derived() : derived_attr(1) {} Derived( const Derived& d) : derived_attr(d.derived_attr) { this->base_attr = d.base_attr; } void derivedIncrement() { ++derived_attr; } protected: T derived_attr; }; and for completeness also the main function: #include "derived.hpp" int main() { Derived<int> d; d.printAttr(); d.baseIncrement(); d.printAttr(); Derived<int> d2(d); d2.printAttr(); return 0; }; I am using g++-4.3.4. Although I understood now that it seems to come from the fact that I use template-class definitions, I did not quite understand what is causing the problem when using templates and why it works when not using templates. Could someone please further clarify this?

  Read the article

• Apache/PHP serving file multiple times

  - by easement

  I have a system with a download.php page. The page takes and id and loads a file based on from the DB Record and then serves it up. I've noticed a couple instances where files are requested multiple times in short time spans (20ms). Times that are too quick for human input. There are plenty of instances where the downloader functions fine. However, in taking a closer look at the downloader’s usage, I did see some interesting behavior. For instance, the IP address xxx.xxx.xxx.xxx (which is one in a range owned by xxxxxx.de in Germany) came to the site through Google. They browsed around and then came to the page http://site.com/xxxx/press+125.php There they issued a request for /download.php?id=/ZZ/n+aH55Y= (a PDF) at 9:04:23AM. That alone is not a big deal. However, what is interesting is that the server seems to have been quite preoccupied with serving that request. In the logs the request first completes between 9:09:48 and 9:10:00. It looks like the user must have gotten tired of waiting during that time and requested the document two more times. Between 09:14:47 and 09:15:00 the same request appears again, except it is from 9:04:43AM, 20ms later than the first request. Then it pops up a third time, with a request that started at 09:05:06 completing between 09:19:55 and 09:19:58! I’m suspicious of that document. In looking through the logs I see other instances where it takes the server a little while to handle that specific file. Check out this list of requests from zzz.zzz.zzz.zzz[different than above] for the file /download.php?id=/ZZ/n+aH55Y= (the same docuemnt as before): Request time Complete Time 04:32:43 04:33:36 04:32:50 04:33:36 04:32:51 04:33:38 04:33:05 04:33:38 04:33:34 04:33:42 04:33:05 04:33:42 So something is definitely going on. Whether it has to do with this specific document tripping up the server, the download.php page’s code, or if we’re just seeing the evidence of some server level overload as it plays out in real time I’m not yet sure. In fairness, there are other instances of people downloading /download.php?id=/ZZ/n+aH55Y= (the same PDF) without error. However, it is interesting that the multiple processes only seem to happen with this one file, and then only when it is accessed through the page http://site.com/press+125.php . It bears further investigation if there’s something amiss inside the code that causes the system to fire off multiple download requests that occupy the server. I don't know if this press+125.php is a rabbit hole, but there is weird consicence. Any ideas? I'm totally out of ideas. Apache maxed out? Things like that. ///DOWNLOAD.php $file = new files(); $file->comparison_filter("id", "=", $id); //sql to load if ($file->load()) { $file->serve(); } //FILES function serve() { if ($this->is_loaded) { if (file_exists($this->get_value("filename"))) { if ($this->get_value("content_type") != "") { header("Content-Type: " . $this->get_value("content_type")); } header("Content-Length: " . filesize($this->get_value("filename"))); if ($this->get_value("flag_image") == 0 || $this->get_value("flag_image") == false) { header("Cache-Control: private"); header("Content-Disposition: attachment; filename=" . urlencode($this->get_value("original_filename"))); } set_time_limit(0); @readfile($this->get_value("filename")); exit; } } }

  Read the article

• C++ Compile problem when using Windows - CodeGear

  - by Carlos

  This is a follow-up question to this one i made earlier. Btw thanks Neil Butterworth for you help http://stackoverflow.com/questions/2461977/problem-compiling-c-in-codegear A quick recap. Im currently developing a C++ program for university, I used Netbeans 6.8 on my personal computer (Mac) and all works perfect. When I try them on my windows partition or at the university PC's using CodeGear RAD Studio 2009 & 2010 i was getting a few compile errors which were solved by adding the following header file: #include <string> However now the program does compile but it doesn't run, just a blank console. And am getting the following in the CodeGear event's log: Thread Start: Thread ID: 2024. Process Project1.exe (3280) Process Start: C:\Users\Carlos\Documents\RAD Studio\Projects\Debug\Project1.exe. Base Address: $00400000. Process Project1.exe (3280) Module Load: Project1.exe. Has Debug Info. Base Address: $00400000. Process Project1.exe (3280) Module Load: ntdll.dll. No Debug Info. Base Address: $77E80000. Process Project1.exe (3280) Module Load: KERNEL32.dll. No Debug Info. Base Address: $771C0000. Process Project1.exe (3280) Module Load: KERNELBASE.dll. No Debug Info. Base Address: $75FE0000. Process Project1.exe (3280) Module Load: cc32100.dll. No Debug Info. Base Address: $32A00000. Process Project1.exe (3280) Module Load: USER32.dll. No Debug Info. Base Address: $77980000. Process Project1.exe (3280) Module Load: GDI32.dll. No Debug Info. Base Address: $75F50000. Process Project1.exe (3280) Module Load: LPK.dll. No Debug Info. Base Address: $75AB0000. Process Project1.exe (3280) Module Load: USP10.dll. No Debug Info. Base Address: $76030000. Process Project1.exe (3280) Module Load: msvcrt.dll. No Debug Info. Base Address: $776A0000. Process Project1.exe (3280) Module Load: ADVAPI32.dll. No Debug Info. Base Address: $777D0000. Process Project1.exe (3280) Module Load: SECHOST.dll. No Debug Info. Base Address: $77960000. Process Project1.exe (3280) Module Load: RPCRT4.dll. No Debug Info. Base Address: $762F0000. Process Project1.exe (3280) Module Load: SspiCli.dll. No Debug Info. Base Address: $759F0000. Process Project1.exe (3280) Module Load: CRYPTBASE.dll. No Debug Info. Base Address: $759E0000. Process Project1.exe (3280) Module Load: IMM32.dll. No Debug Info. Base Address: $763F0000. Process Project1.exe (3280) Module Load: MSCTF.dll. No Debug Info. Base Address: $75AD0000. Process Project1.exe (3280) I would really appreciate any help or ideas on how to solve this problem. P.S: In the case anyone wonders why am I sticking with CodeGear is because is the IDE professors use to evaluate our assignments.

  Read the article

• Matrix Multiplication with Threads: Why is it not faster?

  - by prelic

  Hey all, So I've been playing around with pthreads, specifically trying to calculate the product of two matrices. My code is extremely messy because it was just supposed to be a quick little fun project for myself, but the thread theory I used was very similar to: #include <pthread.h> #include <stdio.h> #include <stdlib.h> #define M 3 #define K 2 #define N 3 #define NUM_THREADS 10 int A [M][K] = { {1,4}, {2,5}, {3,6} }; int B [K][N] = { {8,7,6}, {5,4,3} }; int C [M][N]; struct v { int i; /* row */ int j; /* column */ }; void *runner(void *param); /* the thread */ int main(int argc, char *argv[]) { int i,j, count = 0; for(i = 0; i < M; i++) { for(j = 0; j < N; j++) { //Assign a row and column for each thread struct v *data = (struct v *) malloc(sizeof(struct v)); data->i = i; data->j = j; /* Now create the thread passing it data as a parameter */ pthread_t tid; //Thread ID pthread_attr_t attr; //Set of thread attributes //Get the default attributes pthread_attr_init(&attr); //Create the thread pthread_create(&tid,&attr,runner,data); //Make sure the parent waits for all thread to complete pthread_join(tid, NULL); count++; } } //Print out the resulting matrix for(i = 0; i < M; i++) { for(j = 0; j < N; j++) { printf("%d ", C[i][j]); } printf("\n"); } } //The thread will begin control in this function void *runner(void *param) { struct v *data = param; // the structure that holds our data int n, sum = 0; //the counter and sum //Row multiplied by column for(n = 0; n< K; n++){ sum += A[data->i][n] * B[n][data->j]; } //assign the sum to its coordinate C[data->i][data->j] = sum; //Exit the thread pthread_exit(0); } source: http://macboypro.com/blog/2009/06/29/matrix-multiplication-in-c-using-pthreads-on-linux/ For the non-threaded version, I used the same setup (3 2-d matrices, dynamically allocated structs to hold r/c), and added a timer. First trials indicated that the non-threaded version was faster. My first thought was that the dimensions were too small to notice a difference, and it was taking longer to create the threads. So I upped the dimensions to about 50x50, randomly filled, and ran it, and I'm still not seeing any performance upgrade with the threaded version. What am I missing here?

  Read the article

• Passing a list of files to javac

  - by Robert Menteer

  How can I get the javac task to use an existing fileset? In my build.xml I have created several filesets to be used in multiple places throughout build file. Here is how they have been defined: <fileset dir = "${src}" id = "java.source.all"> <include name = "**/*.java" /> </fileset> <fileset dir = "${src}" id = "java.source.examples"> <include name = "**/Examples/**/*.java" /> </fileset> <fileset dir = "${src}" id = "java.source.tests"> <include name = "**/Tests/*.java" /> </fileset> <fileset dir = "${src}" id = "java.source.project"> <include name = "**/*.java" /> <exclude name = "**/Examples/**/*.java" /> <exclude name = "**/Tests/**/*.java" /> </fileset> I have also used macrodef to compile the java files so the javac task does not need to be repeated multiple times. The macro looks like this: <macrodef name="compile"> <attribute name="sourceref"/> <sequential> <javac srcdir = "${src}" destdir = "${build}" classpathref = "classpath" includeantruntime = "no" debug = "${debug}"> <filelist dir="." files="@{sourceref}" /> <-- email is about this </javac> </sequential> What I'm trying to do is compile only the classes that are needed for specific targets not all the targets in the source tree. And do so without having to specify the files every time. Here are how the targets are defined: <target name = "compile-examples" depends = "init"> <compile sourceref = "${toString:java.source.examples}" /> </target> <target name = "compile-project" depends = "init"> <compile sourceref = "${toString:java.source.project}" /> </target> <target name = "compile-tests" depends = "init"> <compile sourceref = "${toString:java.source.tests}" /> </target> As you can see each target specifies the java files to be compiled as a simi-colon separated list of absolute file names. The only problem with this is that javac does not support filelist. It also does not support fileset, path or pathset. I've tried using but it treats the list as a single file name. Another thing I tried is sending the reference directly (not using toString) and using but include does not have a ref attribute. SO THE QUESTION IS: How do you get the javac task to use a reference to a fileset that was defined in another part of the build file? I'm not interested in solutions that cause me to have multiple javac tasks. Completely re-writting the macro is acceptable. Changes to the targets are also acceptable provided redundant code between targets is kept to a minimum. p.s. Another problem is that fileset wants a comma separated list. I've only done a brief search for a way to convert semi-colons to commas and haven't found a way to do that. p.p.s. Sorry for the yelling but some people are too quick to post responses that don't address the subject.

  Read the article

• Best way to add an extra (nested) form in the middle of a tabbed form

  - by Scharrels

  I've got a web application, consisting mainly of a big form with information. The form is split into multiple tabs, to make it more readable for the user: <form> <div id="tabs"> <ul> <li><a href="#tab1">Tab1</a></li> <li><a href="#tab2">Tab2</a></li> </ul> <div id="tab1">A big table with a lot of input rows</div> <div id="tab2">A big table with a lot of input rows</div> </div> </form> The form is dynamically extended (extra rows are added to the tables). Every 10 seconds the form is serialized and synchronized with the server. I now want to add an interactive form on one of the tabs: when a user enters a name in a field, this information is sent to the server and an id associated with that name is returned. This id is used as an identifier for some dynamically added form fields. A quick sketchup of such a page would look like this: <form action="bigform.php"> <div id="tabs"> <ul> <li><a href="#tab1">Tab1</a></li> <li><a href="#tab2">Tab2</a></li> </ul> <div id="tab1">A big table with a lot of input rows</div> <div id="tab2"> <div class="associatedinfo"> <p>Information for Joe</p> <ul> <li><input name="associated[26][]" /></li> <li><input name="associated[26][]" /></li> </ul> </div> <div class="associatedinfo"> <p>Information for Jill</p> <ul> <li><input name="associated[12][]" /></li> <li><input name="associated[12][]" /></li> </ul> </div> <div id="newperson"> <form action="newform.php"> <p>Add another person:</p> <input name="extra" /><input type="submit" value="Add" /> </form> </div> </div> </div> </form> The above will not work: nested forms are not allowed in HTML. However, I really need to display the form on that tab: it's part of the functionality of that page. I also want the behaviour of a separate form: when the user hits return in the form field, the "Add" submit button is pressed and a submit action is triggered on the partial form. What is the best way to solve this problem?

  Read the article

• Using GA in GUI

  - by AlexT

  Sorry if this isn't clear as I'm writing this on a mobile device and I'm trying to make it quick. I've written a basic Genetic Algorithm with a binary encoding (genes) that builds a fitness value and evolves through several iterations using tournament selection, mutation and crossover. As a basic command-line example it seems to work. The problem I've got is with applying a genetic algorithm within a GUI as I am writing a maze-solving program that uses the GA to find a method through a maze. How do I turn my random binary encoded genes and fitness function (add all the binary values together) into a method to control a bot around a maze? I have built a basic GUI in Java consisting of a maze of labels (like a grid) with the available routes being in blue and the walls being in black. To reiterate my GA performs well and contains what any typical GA would (fitness method, get and set population, selection, crossover, etc) but now I need to plug it into a GUI to get my maze running. What needs to go where in order to get a bot that can move in different directions depending on what the GA says? Rough pseudocode would be great if possible As requested, an Individual is built using a separate class (Indiv), with all the main work being done in a Pop class. When a new individual is instantiated an array of ints represent the genes of said individual, with the genes being picked at random from a number between 0 and 1. The fitness function merely adds together the value of these genes and in the Pop class handles selection, mutation and crossover of two selected individuals. There's not much else to it, the command line program just shows evolution over n generations with the total fitness improving over each iteration. EDIT: It's starting to make a bit more sense now, although there are a few things that are bugging me... As Adamski has suggested I want to create an "Agent" with the options shown below. The problem I have is where the random bit string comes into play here. The agent knows where the walls are and has it laid out in a 4 bit string (i.e. 0111), but how does this affect the random 32 bit string? (i.e. 10001011011001001010011011010101) If I have the following maze (x is the start place, 2 is the goal, 1 is the wall): x 1 1 1 1 0 0 1 0 0 1 0 0 0 2 If I turn left I'm facing the wrong way and the agent will move completely off the maze if it moves forward. I assume that the first generation of the string will be completely random and it will evolve as the fitness grows but I don't get how the string will work within a maze. So, to get this straight... The fitness is the result of when the agent is able to move and is by a wall. The genes are a string of 32 bits, split into 16 sets of 2 bits to show the available actions and for the robot to move the two bits need to be passed with four bits from the agent showings its position near the walls. If the move is to go past a wall the move isn't made and it is deemed invalid and if the move is made and if a new wall is found then the fitness goes up. Is that right?

  Read the article

• Drawing outlines around organic shapes

  - by ThunderChunky_SF

  One thing that seems particularly easy to do in the Flash IDE but difficult to do with code is to outline an organic shape. In the IDE you can just use the inkbucket tool to draw a stroke around something. Using nothing but code it seems much trickier. One method I've seen is to add a glow filter to the shape in question and just mess with the strength. But what if i want to only show the outline? What I'd like to do is to collect all of the points that make up the edge of the shape and then just connect the dots. I've actually gotten so far as to collect all of the points with a quick and dirty edge detection script that I wrote. So now I have a Vector of all the points that makeup my shape. How do I connect them in the proper sequence so it actually looks like the original object? For anyone who is interested here is my edge detection script: // Create a new sprite which we'll use for our outline var sp:Sprite = new Sprite(); var radius:int = 50; sp.graphics.beginFill(0x00FF00, 1); sp.graphics.drawCircle(0, 0, radius); sp.graphics.endFill(); sp.x = stage.stageWidth / 2; sp.y = stage.stageHeight / 2; // Create a bitmap data object to draw our vector data var bmd:BitmapData = new BitmapData(sp.width, sp.height, true, 0); // Use a transform matrix to translate the drawn clip so that none of its // pixels reside in negative space. The draw method will only draw starting // at 0,0 var mat:Matrix = new Matrix(1, 0, 0, 1, radius, radius); bmd.draw(sp, mat); // Pass the bitmap data to an actual bitmap var bmp:Bitmap = new Bitmap(bmd); // Add the bitmap to the stage addChild(bmp); // Grab all of the pixel data from the bitmap data object var pixels:Vector.<uint> = bmd.getVector(bmd.rect); // Setup a vector to hold our stroke points var points:Vector.<Point> = new Vector.<Point>; // Loop through all of the pixels of the bitmap data object and // create a point instance for each pixel location that isn't // transparent. var l:int = pixels.length; for(var i:int = 0; i < l; ++i) { // Check to see if the pixel is transparent if(pixels[i] != 0) { var pt:Point; // Check to see if the pixel is on the first or last // row. We'll grab everything from these rows to close the outline if(i <= bmp.width || i >= (bmp.width * bmp.height) - bmp.width) { pt = new Point(); pt.x = int(i % bmp.width); pt.y = int(i / bmp.width); points.push(pt); continue; } // Check to see if the current pixel is on either extreme edge if(int(i % bmp.width) == 0 || int(i % bmp.width) == bmp.width - 1) { pt = new Point(); pt.x = int(i % bmp.width); pt.y = int(i / bmp.width); points.push(pt); continue; } // Check to see if the previous or next pixel are transparent, // if so save the current one. if(i > 0 && i < bmp.width * bmp.height) { if(pixels[i - 1] == 0 || pixels[i + 1] == 0) { pt = new Point(); pt.x = int(i % bmp.width); pt.y = int(i / bmp.width); points.push(pt); } } } }

  Read the article

• GetAcceptExSockaddrs returns garbage! Does anyone know why?

  - by David

  Hello, I'm trying to write a quick/dirty echoserver in Delphi, but I notice that GetAcceptExSockaddrs seems to be writing to only the first 4 bytes of the structure I pass it. USES SysUtils; TYPE BOOL = LongBool; DWORD = Cardinal; LPDWORD = ^DWORD; short = SmallInt; ushort = Word; uint16 = Word; uint = Cardinal; ulong = Cardinal; SOCKET = uint; PVOID = Pointer; _HANDLE = DWORD; _in_addr = packed record s_addr : ulong; end; _sockaddr_in = packed record sin_family : short; sin_port : uint16; sin_addr : _in_addr; sin_zero : array[0..7] of Char; end; P_sockaddr_in = ^_sockaddr_in; _Overlapped = packed record Internal : Int64; Offset : Int64; hEvent : _HANDLE; end; LP_Overlapped = ^_Overlapped; IMPORTS function _AcceptEx (sListenSocket, sAcceptSocket : SOCKET; lpOutputBuffer : PVOID; dwReceiveDataLength, dwLocalAddressLength, dwRemoteAddressLength : DWORD; lpdwBytesReceived : LPDWORD; lpOverlapped : LP_OVERLAPPED) : BOOL; stdcall; external MSWinsock name 'AcceptEx'; procedure _GetAcceptExSockaddrs (lpOutputBuffer : PVOID; dwReceiveDataLength, dwLocalAddressLength, dwRemoteAddressLength : DWORD; LocalSockaddr : P_Sockaddr_in; LocalSockaddrLength : LPINT; RemoteSockaddr : P_Sockaddr_in; RemoteSockaddrLength : LPINT); stdcall; external MSWinsock name 'GetAcceptExSockaddrs'; CONST BufDataSize = 8192; BufAddrSize = SizeOf (_sockaddr_in) + 16; VAR ListenSock, AcceptSock : SOCKET; Addr, LocalAddr, RemoteAddr : _sockaddr_in; LocalAddrSize, RemoteAddrSize : INT; Buf : array[1..BufDataSize + BufAddrSize * 2] of Byte; BytesReceived : DWORD; Ov : _Overlapped; BEGIN //WSAStartup, create listen socket, bind to port 1066 on any interface, listen //Create event for overlapped (autoreset, initally not signalled) //Create accept socket if _AcceptEx (ListenSock, AcceptSock, @Buf, BufDataSize, BufAddrSize, BufAddrSize, @BytesReceived, @Ov) then WinCheck ('SetEvent', _SetEvent (Ov.hEvent)) else if GetLastError <> ERROR_IO_PENDING then WinCheck ('AcceptEx', GetLastError); {do WaitForMultipleObjects} _GetAcceptExSockaddrs (@Buf, BufDataSize, BufAddrSize, BufAddrSize, @LocalAddr, @LocalAddrSize, @RemoteAddr, @RemoteAddrSize); So if I run this, connect to it with Telnet (on same computer, connecting to localhost) and then type a key, WaitForMultipleObjects will unblock and GetAcceptExSockaddrs will run. But the result is garbage! RemoteAddr.sin_family = -13894 RemoteAddr.sin_port = 64 and the rest is zeroes. What gives? Thanks in advance!

  Read the article

• System.Threading.Timer Doesn't Trigger my TimerCallBack Delegate

  - by Tom Kong

  Hi, I am writing my first Windows Service using C# and I am having some trouble with my Timer class. When the service is started, it runs as expected but the code will not execute again (I want it to run every minute) Please take a quick look at the attached source and let me know if you see any obvious mistakes! TIA using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Diagnostics; using System.Linq; using System.ServiceProcess; using System.Text; using System.Threading; using System.IO; namespace CXO001 { public partial class Service1 : ServiceBase { public Service1() { InitializeComponent(); } /* * Aim: To calculate and update the Occupancy values for the different Sites * * Method: Retrieve data every minute, updating a public value which can be polled */ protected override void OnStart(string[] args) { Daemon(); } public void Daemon() { TimerCallback tcb = new TimerCallback(On_Tick); TimeSpan duetime = new TimeSpan(0, 0, 1); TimeSpan interval = new TimeSpan(0, 1, 0); Timer querytimer = new Timer(tcb, null, duetime, interval); } protected override void OnStop() { } static int[] floorplanids = new int[] { 115, 114, 107, 108 }; public static List<Record> Records = new List<Record>(); static bool firstrun = true; public static void On_Tick(object timercallback) { //Update occupancy data for the last minute //Save a copy of the public values to HDD with a timestamp string starttime; if (Records.Count > 0) { starttime = Records.Last().TS; firstrun = false; } else { starttime = DateTime.Today.AddHours(7).ToString(); firstrun = true; } DateTime endtime = DateTime.Now; GetData(starttime, endtime); } public static void GetData(string starttime, DateTime endtime) { string connstr = "Data Source = 192.168.1.123; Initial Catalog = Brickstream_OPS; User Id = Brickstream; Password = bstas;"; DataSet resultds = new DataSet(); //Get the occupancy for each Zone foreach (int zone in floorplanids) { SQL s = new SQL(); string querystr = "SELECT SUM(DIRECTIONAL_METRIC.NUM_TO_ENTER - DIRECTIONAL_METRIC.NUM_TO_EXIT) AS 'Occupancy' FROM REPORT_OBJECT INNER JOIN REPORT_OBJ_METRIC ON REPORT_OBJECT.REPORT_OBJ_ID = REPORT_OBJ_METRIC.REPORT_OBJECT_ID INNER JOIN DIRECTIONAL_METRIC ON REPORT_OBJ_METRIC.REP_OBJ_METRIC_ID = DIRECTIONAL_METRIC.REP_OBJ_METRIC_ID WHERE (REPORT_OBJ_METRIC.M_START_TIME BETWEEN '" + starttime + "' AND '" + endtime.ToString() + "') AND (REPORT_OBJECT.FLOORPLAN_ID = '" + zone + "');"; resultds = s.Go(querystr, connstr, zone.ToString(), resultds); } List<Record> result = new List<Record>(); int c = 0; foreach (DataTable dt in resultds.Tables) { Record r = new Record(); r.TS = DateTime.Now.ToString(); r.Zone = dt.TableName; if (!firstrun) { r.Occupancy = (dt.Rows[0].Field<int>("Occupancy")) + (Records[c].Occupancy); } else { r.Occupancy = dt.Rows[0].Field<int>("Occupancy"); } result.Add(r); c++; } Records = result; MrWriter(); } public static void MrWriter() { StringBuilder output = new StringBuilder("Time,Zone,Occupancy\n"); foreach (Record r in Records) { output.Append(r.TS); output.Append(","); output.Append(r.Zone); output.Append(","); output.Append(r.Occupancy.ToString()); output.Append("\n"); } output.Append(firstrun.ToString()); output.Append(DateTime.Now.ToFileTime()); string filePath = @"C:\temp\CXO.csv"; File.WriteAllText(filePath, output.ToString()); } } }

  Read the article

• GUI Freezes and Output to JTextField from user input

  - by user2929005

  I am having I hope only two issues currently. I have had help on this on a previous question that I have asked but now I am running into different issues. My current issues now is that I need to print out into a JTextField a sorted array. I do not have questions about how to sort the array I just would like help on how to get the array to print to the JTextField when the Bubble Sort button is pressed. Currently when I press the button it freezes. It freezes at this line. list.add(Integer.valueOf(input.nextInt())); please help Thank you. import java.awt.EventQueue; import javax.swing.*; import java.awt.event.*; import java.util.*; public class Sorting { private JFrame frame; private JTextArea inputArea; private JTextField outputArea; ArrayList<Integer> list = new ArrayList<Integer>(); Scanner input = new Scanner(System.in); /** * Launch the application. */ public static void main(String[] args) { EventQueue.invokeLater(new Runnable() { public void run() { try { Sorting window = new Sorting(); window.frame.setVisible(true); } catch (Exception e) { e.printStackTrace(); } } }); } /** * Create the application. */ public Sorting() { initialize(); } /** * Initialize the contents of the frame. */ private void initialize() { frame = new JFrame(); frame.setBounds(100, 100, 450, 300); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setTitle("Sorting"); frame.getContentPane().setLayout(null); JButton bubbleButton = new JButton("Bubble Sort"); bubbleButton.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent arg0) { list.add(Integer.valueOf(input.nextInt())); // for(int i = 0; i < list.size(); i++){ // // } } }); bubbleButton.setBounds(10, 211, 114, 23); frame.getContentPane().add(bubbleButton); JButton mergeButton = new JButton("Merge Sort"); mergeButton.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { } }); mergeButton.setBounds(305, 211, 114, 23); frame.getContentPane().add(mergeButton); JButton quickButton = new JButton("Quick Sort"); quickButton.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { } }); quickButton.setBounds(163, 211, 114, 23); frame.getContentPane().add(quickButton); inputArea = new JTextArea(); inputArea.setBounds(10, 36, 414, 51); frame.getContentPane().add(inputArea); outputArea = new JTextField(); outputArea.setEditable(false); outputArea.setBounds(10, 98, 414, 59); frame.getContentPane().add(outputArea); outputArea.setColumns(10); JLabel label = new JLabel("Please Enter 5 Numbers"); label.setHorizontalAlignment(SwingConstants.CENTER); label.setBounds(10, 11, 414, 14); frame.getContentPane().add(label); } }

  Read the article

• Loading multiple copies of a group of DLLs in the same process

  - by george

  Background I'm maintaining a plugin for an application. I'm Using Visual C++ 2003. The plugin is composed of several DLLs - there's the main DLL, that's the one that the application loads using LoadLibrary, and there are several utility DLLs that are used by the main DLL and by each other. Dependencies generally look like this: plugin.dll - utilA.dll, utilB.dll utilA.dll - utilB.dll utilB.dll - utilA.dll, utilC.dll You get the picture. Some of the dependencies between the DLLs are load-time and some run-time. All the DLL files are stored in the executable's directory (not a requirement, just how it works now). The problem There's a new requirement - running multiple instances of the plugin within the application. The application runs each instance of a plugin in its own thread, i.e. each thread calls The plugin's code, however, is nothing but thread-safe - lots of global variables etc.. Unfortunately, fixing the whole thing isn't currently an option, so I need a way to load multiple (at most 3) copies of the plugin's DLLs in the same process. Option 1: The distinct names approach Creating 3 copies of each DLL file, so that each file has a distinct name. e.g. plugin1.dll, plugin2.dll, plugin3.dll, utilA1.dll, utilA2.dll, utilA3.dll, utilB1.dll, etc.. The application will load plugin1.dll, plugin2.dll and plugin3.dll. The files will be in the executable's directory. For each group of DLLs to know each other by name (so the inter-dependencies work), the names need to be known at compilation time - meaning the DLLs need to be compiled multiple times, only each time with different output file names. Not very complicated, but I'd hate having 3 copies of the VS project files, and don't like having to compile the same files over and over. Option 2: The side-by-side assemblies approach Creating 3 copies of the DLL files, each group in its own directory, and defining each group as an assembly by putting an assembly manifest file in the directory, listing the plugin's DLLs. Each DLL will have an application manifest pointing to the assembly, so that the loader finds the copies of the utility DLLs that reside in the same directory. The manifest needs to be embedded for it to be found when a DLL is loaded using LoadLibrary. I'll use mt.exe from a later VS version for the job, since VS2003 has no built-in manifest embedding support. I've tried this approach with partial success - dependencies are found during load-time of the DLLs, but not when a DLL function is called that loads another DLL. This seems to be the expected behavior according to this article - A DLL's activation context is only used at the DLL's load-time, and afterwards it's deactivated and the process's activation context is used. I haven't yet tried working around this using ISOLATION_AWARE_ENABLED. Questions Got any other options? Any quick & dirty solution will do. :-) Will ISOLATION_AWARE_ENABLED even work with VS2003? Comments will be greatly appreciated. Thanks!

  Read the article

• How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

  - by Timbo

  I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

  Read the article

• Doing XML extracts with XSLT without having to read the whole DOM tree into memory?

  - by Thorbjørn Ravn Andersen

  I have a situation where I want to extract some information from some very large but regular XML files (just had to do it with a 500 Mb file), and where XSLT would be perfect. Unfortunately those XSLT implementations I am aware of (except the most expensive version of Saxon) does not support only having the necessary part of the DOM read in but reads in the whole tree. This cause the computer to swap to death. The XPath in question is //m/e[contains(.,'foobar') so it is essentially just a grep. Is there an XSLT implementation which can do this? Or an XSLT implementation which given suitable "advice" can do this trick of pruning away the parts in memory which will not be needed again? I'd prefer a Java implementation but both Windows and Linux are viable native platforms. EDIT: The input XML looks like: <log> <!-- Fri Jun 26 12:09:27 CEST 2009 --> <e h='12:09:27,284' l='org.apache.catalina.session.ManagerBase' z='1246010967284' t='ContainerBackgroundProcessor[StandardEngine[Catalina]]' v='10000'> <m>Registering Catalina:type=Manager,path=/axsWHSweb-20090626,host=localhost</m></e> <e h='12:09:27,284' l='org.apache.catalina.session.ManagerBase' z='1246010967284' t='ContainerBackgroundProcessor[StandardEngine[Catalina]]' v='10000'> <m>Force random number initialization starting</m></e> <e h='12:09:27,284' l='org.apache.catalina.session.ManagerBase' z='1246010967284' t='ContainerBackgroundProcessor[StandardEngine[Catalina]]' v='10000'> <m>Getting message digest component for algorithm MD5</m></e> <e h='12:09:27,284' l='org.apache.catalina.session.ManagerBase' z='1246010967284' t='ContainerBackgroundProcessor[StandardEngine[Catalina]]' v='10000'> <m>Completed getting message digest component</m></e> <e h='12:09:27,284' l='org.apache.catalina.session.ManagerBase' z='1246010967284' t='ContainerBackgroundProcessor[StandardEngine[Catalina]]' v='10000'> <m>getDigest() 0</m></e> ...... </log> Essentialy I want to select some m-nodes (and I know the XPath is wrong for that, it was just a quick hack), but maintain the XML layout. EDIT: It appears that STX may be what I am looking for (I can live with another transformation language), and that Joost is an implementation hereof. Any experiences? EDIT: I found that Saxon 6.5.4 with -Xmx1500m could load my XML, so this allowed me to use my XPaths right now. This is just a lucky stroke so I'd still like to solve this generically - this means scriptable which in turn means no handcrafted Java filtering first. EDIT: Oh, by the way. This is a log file very similar to what is generated by the log4j XMLLayout. The reason for XML is to be able to do exactly this, namely do queries on the log. This is the initial try, hence the simple question. Later I'd like to be able to ask more complex questions - therefore I'd like the query language to be able to handle the input file.

  Read the article

• RadioGroup onCheckedChanged function won't fire

  - by user1758088

  First time/long time. My app keeps track of restaurant servers' shift sales to help them budget. In the activity that displays past shifts, I've created a RadioGroup under the ListView so the server can choose lunch, dinner, or both. I've implemented RadioGroup.onCheckedChangeListener, but onCheckChanged never gets called. I also tried an anonymous inner class as listener, same result. I tried to copy/modify code from this answer: http://stackoverflow.com/a/9595528 ...but when I added the @Override to the callback function, the Eclipse compiler gave me an error (not warning) that the method must override a superclass, and the quick fix was to remove the override. I'm pretty sure the signatures are correct, as they were made with Eclipse's autocomplete and implement methods facilities. I then followed instructions to move my java compiler from 1.5 to 1.6, and none of the above listed behavior seemed to change. Here's the code I thing is relavent: public class DataActivity extends ListActivity implements OnCheckedChangeListener{ RadioButton rbBoth; RadioButton rbDinnerOnly; RadioButton rbLunchOnly; @Override public void onCreate(Bundle savedInstanceState){ super.onCreate(savedInstanceState); setContentView(R.layout.database); ... final RadioGroup rgGroup = (RadioGroup)findViewById(R.id.DataRadioGroup); rbBoth = (RadioButton)findViewById(R.id.RadioBoth); rbDinnerOnly = (RadioButton)findViewById(R.id.RadioDinnerOnly); rbLunchOnly = (RadioButton)findViewById(R.id.RadioLunchOnly); rgGroup.setOnCheckedChangeListener(this); populateAllShifts(); } ... public void onCheckedChanged(RadioGroup group, int checkedId) { rbLunchOnly.setText("Click!"); Toast.makeText(getApplicationContext(), "Lunch Only", Toast.LENGTH_LONG).show(); if(group.getCheckedRadioButtonId() == R.id.RadioBoth){ populateAllShifts(); return; } if(group.getCheckedRadioButtonId() == R.id.RadioLunchOnly){ populatLunchShifts(); return; } if(group.getCheckedRadioButtonId() == R.id.RadioDinnerOnly){ populateDinnerShifts(); return; } } There is a ListView in this class with a custom adapter, but if my understanding and my XML are correct, the RadioGroup should be outside of the list: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/llDataLayout" android:weightSum="5" android:layout_width="fill_parent" android:layout_height="fill_parent" android:orientation="vertical"> <ListView android:layout_weight="4" android:layout_width="fill_parent" android:id="@android:id/list" android:layout_height="wrap_content"></ListView> <RadioGroup android:layout_weight="1" android:id="@+id/DataRadioGroup" android:orientation="horizontal" android:layout_height="wrap_content" android:layout_width="fill_parent"> <RadioButton android:text="Lunch and Dinner" android:textSize="10dp" android:layout_width="wrap_content" android:layout_height="wrap_content" android:id="@+id/RadioBoth"/> <RadioButton android:text="Dinner Only" android:textSize="10dp" android:layout_width="wrap_content" android:layout_height="wrap_content" android:id="@+id/RadioDinnerOnly"/> <RadioButton android:text="Lunch Only" android:textSize="10dp" android:layout_width="wrap_content" android:layout_height="wrap_content" android:id="@+id/RadioLunchOnly"/> </RadioGroup> </LinearLayout> Any ideas out there?

  Read the article

• Trying to packetize TCP with non-blocking IO is hard! Am I doing something wrong?

  - by Ricket

  Oh how I wish TCP was packet-based like UDP is! But alas, that's not the case, so I'm trying to implement my own packet layer. Here's the chain of events so far (ignoring writing packets) Oh, and my Packets are very simply structured: two unsigned bytes for length, and then byte[length] data. (I can't imagine if they were any more complex, I'd be up to my ears in if statements!) Server is in an infinite loop, accepting connections and adding them to a list of Connections. PacketGatherer (another thread) uses a Selector to figure out which Connection.SocketChannels are ready for reading. It loops over the results and tells each Connection to read(). Each Connection has a partial IncomingPacket and a list of Packets which have been fully read and are waiting to be processed. On read(): Tell the partial IncomingPacket to read more data. (IncomingPacket.readData below) If it's done reading (IncomingPacket.complete()), make a Packet from it and stick the Packet into the list waiting to be processed and then replace it with a new IncomingPacket. There are a couple problems with this. First, only one packet is being read at a time. If the IncomingPacket needs only one more byte, then only one byte is read this pass. This can of course be fixed with a loop but it starts to get sorta complicated and I wonder if there is a better overall way. Second, the logic in IncomingPacket is a little bit crazy, to be able to read the two bytes for the length and then read the actual data. Here is the code, boiled down for quick & easy reading: int readBytes; // number of total bytes read so far byte length1, length2; // each byte in an unsigned short int (see getLength()) public int getLength() { // will be inaccurate if readBytes < 2 return (int)(length1 << 8 | length2); } public void readData(SocketChannel c) { if (readBytes < 2) { // we don't yet know the length of the actual data ByteBuffer lengthBuffer = ByteBuffer.allocate(2 - readBytes); numBytesRead = c.read(lengthBuffer); if(readBytes == 0) { if(numBytesRead >= 1) length1 = lengthBuffer.get(); if(numBytesRead == 2) length2 = lengthBuffer.get(); } else if(readBytes == 1) { if(numBytesRead == 1) length2 = lengthBuffer.get(); } readBytes += numBytesRead; } if(readBytes >= 2) { // then we know we have the entire length variable // lazily-instantiate data buffers based on getLength() // read into data buffers, increment readBytes // (does not read more than the amount of this packet, so it does not // need to handle overflow into the next packet's data) } } public boolean complete() { return (readBytes > 2 && readBytes == getLength()+2); } Basically I need feedback on my code. Please suggest any improvements. Even overhauling my entire system would be okay, if you have suggestions for how better to implement the whole thing. Book recommendations are welcome too; I love books. I just get the feeling that something isn't quite right.

  Read the article

• Dynamic form in PHP not processing correctly

  - by user1497265

  My last question regarding this suggested I incorporate AJAX with PHP. However, I really wanted to try PHP exclusively for this project, and I seem to have made it about 95% there. I just need help on this one issue. Here's a quick background. My project requires a dynamic form to be populated with a max limit of 10 questions. Each form contains one question, one question number, and a text field. Students would go on and answer the questions. This is all driven by a database table (obviously), and when a question gets answered correctly, it will close and the next question in line will appear. There will always be 10 questions on the page. Here's how the coding looks, and it works perfectly. <? $rt = mysql_query("SELECT * FROM The_Questions WHERE Status='Open' ORDER BY 'Number' LIMIT 10"); while ($row = mysql_fetch_array($rt)) { $number=$row[0]; $category = $row[1]; $question=$row[2]; $points=$row[4]; $_SESSION['number'] = $number; ?> <form action="processor.php" method="post" class="qForm"> <div class="questionCell"> <div class="question"><? echo $number; echo $question ?></div> <div class="answer">Answer: <input class="inputField" name="q1" type="text" size="40" maxlength="40" /> <input name="HHQuestion" value="Submit" type="submit" /></div> </div> </form> <? } ?> The questions appear as they should, in the correct order, and the correct limit. Everything seems to be looking fine until a question gets answered and gets processed through the processor.php action. First here's the code to the processor.php file: <?php session_start(); if(isset($_POST["HHQuestion"])){ $dbhost = 'localhost'; $dbname = 'localhost'; $dbuser = 'localhost'; $dbpass = 'localhost'; $conn = mysql_connect($dbhost, $dbuser, $dbpass); mysql_select_db($dbname, $conn); { $number1 = $_SESSION['number']; $answer=$_POST['q1']; $sql="SELECT * FROM The_Questions WHERE Number='$number1'"; $result=mysql_query($sql); $row=mysql_fetch_array($result); $question = $row[2]; echo $question .'<br>'; echo $number1.'<br>'; echo $answer; } } ?> This is NOT live yet, and for testing purposes I'm echoing the question, question number, and answer (as you can see). What's happening is that the $question and $number1 displays the last question in the array (the $answer displays correctly, meaning it displays whatever was written in the dynamic form). Can anyone tell me why that is? If I change the LIMIT number to 20, the processor.php action will display the 20th question and number, even if I was answering question 8, for example, in the dynamic form. Again, the dynamic forms are being displayed correctly, and are numbered correctly. For some unknown reason to me, the action - processor.php - is grabbing the last question in the array. Any ideas on what I'm doing wrong? I'm hoping it's a simple code change that I'm overlooking. Thanks in advance guys!

  Read the article

• What language/framework (technology) to use for website (flash games portal)

  - by cripox

  Hello, I know there are a lot of similar questions on the net, but because I am a newbie in web development I didn't find the solution for my specific problem. I am planing on creating a flash games portal from scratch. It is a big chance that there will be big traffic from the beginning (millions of pageviews). I want to reduce the server costs as much as possible but in the same time to not be tide to an expensive contract as there is a chance that the project will not be as successfully as I want and in that case the money would be very little. The question is : what technology to use? I don't know any web dev technology yet so it doesn't matter what I will learn. My web dev experience is a little php 8 years ago, and from then I programmed in C++ / Java- game and mobile development. I like Java and C syntax and language very much and I tend to dislike dynamic typing or non robust scripting (like php)- but I can get along if these are the best choices. The candidates are now: - Grails (my best for now) Ruby on Rails Cake PHP Other technologies (Google App Engine, Python/Django etc...) I was considering at first using pure C and compiling the web app in the server- just to squeeze more from the servers, but soon I understand that this is overkill. Next my eyes came on Ruby - as there is a lot of buzz for it's easiness of use. Next I discovered Grails and looked at Java because it is said that it is "faster". But I don't know what this "Faster" really means on my needs, so here comes the first question: 1) What will be my biggest consumption on the server, other than bandwidth, for a lot of flash content requests? Is it memory? I heard that Java needs a lot of memory, but is faster. Is it CPU? I am planning to take some daily VPS.NET nodes at first, to see if there is a demand, and if the "spike" is permanent to move to a dedicated server (serverloft.com has some good offers), else to remain with less nodes. I was also considering developing in Google App Engine- cheap or free hosting to use at first - so I can test my assumption- and also very easy to use (no need for sys administration) but the costs became high if used more ( 3 million games played / month .. x mb/ each). And the issue with Google is that it looks me in this technology. My other concern is scalability (not only for traffic/users, but as adding functionality) My plans are to release a functional site in just 4 weeks (just the basics frontend and some quick basic backend - so I can be able to modify some things and add games manually) - but then to raise it and add more things to it. I am planning to take a little different approach than other portals so I need to write it from scratch (a script will not do). 2) Will Grails take much more resources than RoR or Php server wise? I heard that making it on Java stack will be hardware expensive and is overkill if you don't make a bank application. My application will not be very complex (I hope and i will try to) but will have a lot of traffic. I also took in account using CDN for files, but the cheapest CDN found was 5c/GB (vps.net) and the cost per gb on serverloft (http://www.serverloft.com/dedizierte-server/server-details.php?products=4) is only 1.79 cents/GB and comes with the other resources either. I am new to this domain (web). I am learning the ropes and searching on the web for ~half of year but don't have any really practical experience, so I know that I must have some naive thinking and other issues that i don't know from now, so please give me any advice you want regarding anything, not just the specific questions asked. And thank you so much for such great community!

  Read the article

• Zend models and database relathionships

  - by user608341

  Hi people, i'm starting with Zend Framework and I'm a little bit confused with models and relathionships (one-to-many, many-to-many etc). The "Zend Framework Quick Start" says to create a Zend_Db_Table, a Data Mapper and finally our model class Suppose we have a database like this: table A ( id integer primary key, name varchar(50) ); table B ( id integer primary key, a_id integer references A ); then, i'll create: Application_Model_DbTable_A extends Zend_Db_Table_Abstract, Application_Model_AMapper, Application_Model_A, Application_Model_DbTable_B extends Zend_Db_Table_Abstract, Application_Model_BMapper, Application_Model_B, if I understood, i've to store the references informations in Application_Model_DbTable_A: protected $_dependentTables = array('B'); and Application_Model_DbTable_B: protected $_referenceMap = array( 'A' => array( 'columns' => array('a_id'), 'refTableClass' => 'A', 'refColums' => array('id') ) ); and my models class: class Application_Model_A { protected $_id; protected $_name; public function __construct(array $options = null) { if(is_array($options)) { $this->setOptions($options); } } public function __set($name, $value) { $method = 'set' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } $this->$method($value); } public function __get($name) { $method = 'get' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } return $this->$method(); } public function setOptions(array $options) { $methods = get_class_methods($this); foreach ($options as $key => $value) { $method = 'set' . ucfirst($key); if (in_array($method, $methods)) { $this->$method($value); } } return $this; } public function setName($name) { $this->_name = (string) $name; return $this; } public function getName() { return $this->_name; } public function setId($id) { $this->_id = (int) $id; return $this; } public function getId() { return $this->_id; } class Application_Model_B { protected $_id; protected $_a_id; public function __construct(array $options = null) { if(is_array($options)) { $this->setOptions($options); } } public function __set($name, $value) { $method = 'set' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } $this->$method($value); } public function __get($name) { $method = 'get' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } return $this->$method(); } public function setOptions(array $options) { $methods = get_class_methods($this); foreach ($options as $key => $value) { $method = 'set' . ucfirst($key); if (in_array($method, $methods)) { $this->$method($value); } } return $this; } public function setA_id($a_id) { $this->_a_id = (int) $a_id; return $this; } public function getA_id() { return $this->_a_id; } public function setId($id) { $this->_id = (int) $id; return $this; } public function getId() { return $this->_id; } it's that right?

  Read the article

• Testing for Adjacent Cells In a Multi-level Grid

  - by Steve

  I'm designing an algorithm to test whether cells on a grid are adjacent or not. The catch is that the cells are not on a flat grid. They are on a multi-level grid such as the one drawn below. Level 1 (Top Level) | - - - - - | | A | B | C | | - - - - - | | D | E | F | | - - - - - | | G | H | I | | - - - - - | Level 2 | -Block A- | -Block B- | | 1 | 2 | 3 | 1 | 2 | 3 | | - - - - - | - - - - - | | 4 | 5 | 6 | 4 | 5 | 6 | ... | - - - - - | - - - - - | | 7 | 8 | 9 | 7 | 8 | 9 | | - - - - - | - - - - - | | -Block D- | -Block E- | | 1 | 2 | 3 | 1 | 2 | 3 | | - - - - - | - - - - - | | 4 | 5 | 6 | 4 | 5 | 6 | ... | - - - - - | - - - - - | | 7 | 8 | 9 | 7 | 8 | 9 | | - - - - - | - - - - - | . . . . . . This diagram is simplified from my actual need but the concept is the same. There is a top level block with many cells within it (level 1). Each block is further subdivided into many more cells (level 2). Those cells are further subdivided into level 3, 4 and 5 for my project but let's just stick to two levels for this question. I'm receiving inputs for my function in the form of "A8, A9, B7, D3". That's a list of cell Ids where each cell Id has the format (level 1 id)(level 2 id). Let's start by comparing just 2 cells, A8 and A9. That's easy because they are in the same block. private static RelativePosition getRelativePositionInTheSameBlock(String v1, String v2) { RelativePosition relativePosition; if( v1-v2 == -1 ) { relativePosition = RelativePosition.LEFT_OF; } else if (v1-v2 == 1) { relativePosition = RelativePosition.RIGHT_OF; } else if (v1-v2 == -BLOCK_WIDTH) { relativePosition = RelativePosition.TOP_OF; } else if (v1-v2 == BLOCK_WIDTH) { relativePosition = RelativePosition.BOTTOM_OF; } else { relativePosition = RelativePosition.NOT_ADJACENT; } return relativePosition; } An A9 - B7 comparison could be done by checking if A is a multiple of BLOCK_WIDTH and whether B is (A-BLOCK_WIDTH+1). Either that or just check naively if the A/B pair is 3-1, 6-4 or 9-7 for better readability. For B7 - D3, they are not adjacent but D3 is adjacent to A9 so I can do a similar adjacency test as above. So getting away from the little details and focusing on the big picture. Is this really the best way to do it? Keeping in mind the following points: I actually have 5 levels not 2, so I could potentially get a list like "A8A1A, A8A1B, B1A2A, B1A2B". Adding a new cell to compare still requires me to compare all the other cells before it (seems like the best I could do for this step is O(n)) The cells aren't all 3x3 blocks, they're just that way for my example. They could be MxN blocks with different M and N for different levels. In my current implementation above, I have separate functions to check adjacency if the cells are in the same blocks, if they are in separate horizontally adjacent blocks or if they are in separate vertically adjacent blocks. That means I have to know the position of the two blocks at the current level before I call one of those functions for the layer below. Judging by the complexity of having to deal with mulitple functions for different edge cases at different levels and having 5 levels of nested if statements. I'm wondering if another design is more suitable. Perhaps a more recursive solution, use of other data structures, or perhaps map the entire multi-level grid to a single-level grid (my quick calculations gives me about 700,000+ atomic cell ids). Even if I go that route, mapping from multi-level to single level is a non-trivial task in itself.

  Read the article

• my Search method is coming up with all nulls

  - by Epic.Distortion

  Let me give a quick explanation. I took a 5 week course through a company on Java in July. They covered basic stuff, like console app, crud operations, mysql, and n-tier architecture. Since the course ended I didn't use it much because I went back to work, and other medical reasons surfaced....blah blah. I was told by the company to make a simple program to reflect what I learned. Turns out I retained very little. I decided to make a video game starage program. It would be used to stare your video games so you wouldn't have to search your bookcase(or how ever you store your games.) It is a basic console app using the crud operations with MYSQL. I can't get my search function to actually work. I have 2 layers a Presentation layer and a Logic layer. The search method allows them to search for a game by the title. when i bring run the program and use Search it only displays the title and the rest is null. here is my Presentation layer: private static Games SearchForGame() { Logic aref = new Logic(); Games g = new Games(); Scanner scanline = new Scanner(System.in); System.out.println("Please enter the name of the game you wish to find:"); g.setTitle(scanline.nextLine()); aref.SearchGame(); System.out.println(); System.out.println("Game Id: " + g.getGameId()); System.out.println("Title: " + g.getTitle()); System.out.println("Rating: " + g.getRating()); System.out.println("Platform: "+ g.getPlatform()); System.out.println("Developer: "+ g.getDeveloper()); return g; } and here is my logic layer public Games SearchGame() { Games g = new Games(); try { Class.forName(driver).newInstance(); Connection conn = DriverManager.getConnection(url+dbName,userName,password); java.sql.PreparedStatement statement = conn.prepareStatement("SELECT GameId,Title,Rating,Platform,Developer FROM games WHERE Title=?"); statement.setString(1, g.getTitle()); ResultSet rs = statement.executeQuery(); while(rs.next()){ g.setGameId(rs.getInt("GameId")); g.setTitle(rs.getString("Title")); g.setRating(rs.getString("Rating")); g.setPlatform(rs.getString("Platform")); g.setDeveloper(rs.getString("Developer")); statement.executeUpdate(); } } catch (Exception e) { e.printStackTrace(); } return g; } here is also my last results Please enter the name of the game you wish to find: Skyrim Game Id: 0 Title: Skyrim Rating: null Platform: null Developer: null any help would be greatly appreciated and thanks in advance EDIT: here is my code for my games class public class Games { public int GameId; public String Title; public String Rating; public String Platform; public String Developer; public int getGameId() { return GameId; } public int setGameId(int gameId) { return GameId = gameId; } public String getTitle() { return Title; } public String setTitle(String title) { return Title = title; } public String getRating() { return Rating; } public void setRating(String rating) { Rating = rating; } public String getPlatform() { return Platform; } public void setPlatform(String platform) { Platform = platform; } public String getDeveloper() { return Developer; } public void setDeveloper(String developer) { Developer = developer; } }

  Read the article

• Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

  - by DigitalGeekery

  Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs.   One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address.   Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser.   Dynamic DNS This is an optional step, but  it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email.   Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated.    On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list.   With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to  the listings at that time of the day.  Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right.   To setup a recording, click on a program.   You can choose to record the individual show or the entire series by clicking on Record Show or Record Series.   Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording.   Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting  allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting.   Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right.   Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen.   Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >