Search Results

Search found 8193 results on 328 pages for 'dev ray'.

Page 23/328 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• Udev webcam rule read, but not respected?

  - by user89305

  I have two usb-webcams on them machine, but at bot they some switch /dev/video number. The solution to this problem seems to be new udev rule. I have added this rule in/etc/udev/rules.d/jj-video.rules: Fix webcam 1 KERNEL=="video1", SUBSYSTEM=="video4linux", SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d6b", ATTRS{idProduct}=="0001", SYMLINK+="webcam1" Fix webcam 2 KERNEL=="video2", SUBSYSTEM=="video4linux", ATTR{name}=="Logitech QuickCam Pro 3000", KERNELS=="0000:00:1d.0", SUBSYSTEMS=="pci", DRIVERS=="uhci_hcd", ATTRS{vendor}=="0x8086", ATTRS##{device}=="0x2658", SYMLINK+="webcam2" but the symlinks are not created. I have tried many different combinations in this file. The present ones are just my lates attempts. I found the parameters in: jjk@eee-old:~$ udevadm info -a -p $(udevadm info -q path -p /class/video4linux/video1) Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1': KERNEL=="video1" SUBSYSTEM=="video4linux" DRIVER=="" ATTR{name}=="Logitech QuickCam Pro 3000" ATTR{index}=="0" ATTR{button}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0': KERNELS=="2-2:1.0" SUBSYSTEMS=="usb" DRIVERS=="Philips webcam" ATTRS{bInterfaceNumber}=="00" ATTRS{bAlternateSetting}==" 9" ATTRS{bNumEndpoints}=="02" ATTRS{bInterfaceClass}=="0a" ATTRS{bInterfaceSubClass}=="ff" ATTRS{bInterfaceProtocol}=="00" ATTRS{supports_autosuspend}=="0" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-2': KERNELS=="2-2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 3" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="a0" ATTRS{bMaxPower}=="500mA" ATTRS{urbnum}=="371076" ATTRS{idVendor}=="046d" ATTRS{idProduct}=="08b0" ATTRS{bcdDevice}=="0002" ATTRS{bDeviceClass}=="00" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="2" ATTRS{devpath}=="2" ATTRS{version}==" 1.10" ATTRS{maxchild}=="0" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{serial}=="01402100A5000000" looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2': KERNELS=="usb2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{configuration}=="" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bMaxPower}==" 0mA" ATTRS{urbnum}=="34" ATTRS{idVendor}=="1d6b" ATTRS{idProduct}=="0001" ATTRS{bcdDevice}=="0302" ATTRS{bDeviceClass}=="09" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{bNumConfigurations}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{speed}=="12" ATTRS{busnum}=="2" ATTRS{devnum}=="1" ATTRS{devpath}=="0" ATTRS{version}==" 1.10" ATTRS{maxchild}=="2" ATTRS{quirks}=="0x0" ATTRS{avoid_reset_quirk}=="0" ATTRS{authorized}=="1" ATTRS{manufacturer}=="Linux 3.2.0-29-generic uhci_hcd" ATTRS{product}=="UHCI Host Controller" ATTRS{serial}=="0000:00:1d.0" ATTRS{authorized_default}=="1" looking at parent device '/devices/pci0000:00/0000:00:1d.0': KERNELS=="0000:00:1d.0" SUBSYSTEMS=="pci" DRIVERS=="uhci_hcd" ATTRS{vendor}=="0x8086" ATTRS{device}=="0x2658" ATTRS{subsystem_vendor}=="0x1043" ATTRS{subsystem_device}=="0x82d8" ATTRS{class}=="0x0c0300" ATTRS{irq}=="23" ATTRS{local_cpus}=="ff" ATTRS{local_cpulist}=="0-7" ATTRS{dma_mask_bits}=="32" ATTRS{consistent_dma_mask_bits}=="32" ATTRS{broken_parity_status}=="0" ATTRS{msi_bus}=="" looking at parent device '/devices/pci0000:00': KERNELS=="pci0000:00" SUBSYSTEMS=="" DRIVERS=="" jjk@eee-old:~$ And tested the setup: sudo udevadm --debug test /sys/class/video4linux/video1 main: runtime dir '/run/udev' run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-gnupg.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-hplip.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ia64.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-inputattach.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libgphoto2-2.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-libsane.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-ppc.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-xserver-xorg-video-intel.rules' as rules file parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-firmware.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file parse_file: reading '/lib/udev/rules.d/55-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/56-hpmud_support.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-cdrom_id.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-pcmcia.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file parse_file: reading '/lib/udev/rules.d/61-accelerometer.rules' as rules file parse_file: reading '/lib/udev/rules.d/64-xorg-xkb.rules' as rules file parse_file: reading '/lib/udev/rules.d/66-xorg-synaptics-quirks.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 parse_file: reading '/lib/udev/rules.d/69-libmtp.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xorg-vmmouse.rules' as rules file parse_file: reading '/lib/udev/rules.d/69-xserver-xorg-input-wacom.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-printers.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-udev-acl.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-cd-aliases-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-net-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-persistent-net-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-ericsson-mbm.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-longcheer-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-nokia-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-pcmcia-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-platform-serial-whitelist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-qdl-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-simtech-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-x22x-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-mm-zte-port-types.rules' as rules file parse_file: reading '/lib/udev/rules.d/77-nm-olpc-mesh.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-graphics-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-drivers.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-mm-candidate.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-udisks.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-brltty.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hdparm.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hplj10xx.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-keyboard-configuration.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-regulatory.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-restore.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-alsa-ucm.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-libgpod.rules' as rules file parse_file: reading '/lib/udev/rules.d/90-pulseaudio.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-cd-devices.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keyboard-force-release.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-keymap.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-udev-late.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-dell.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-gateway.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-ibm.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-csr.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file parse_file: reading '/etc/udev/rules.d/jj-video.rules' as rules file udev_rules_new: rules use 259284 bytes tokens (21607 * 12 bytes), 37913 bytes buffer udev_rules_new: temporary index used 67520 bytes (3376 * 20 bytes) udev_device_new_from_syspath: device 0x215103e0 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_new_from_syspath: device 0x21510758 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' udev_device_read_db: device 0x21510758 filled with db file data udev_device_new_from_syspath: device 0x21510e10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0' udev_device_new_from_syspath: device 0x21511b10 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2/2-2' udev_device_new_from_syspath: device 0x215132f8 has devpath '/devices/pci0000:00/0000:00:1d.0/usb2' udev_device_new_from_syspath: device 0x21513650 has devpath '/devices/pci0000:00/0000:00:1d.0' udev_device_new_from_syspath: device 0x21513980 has devpath '/devices/pci0000:00' udev_rules_apply_to_event: GROUP 44 /lib/udev/rules.d/50-udev-default.rules:29 udev_rules_apply_to_event: IMPORT 'v4l_id /dev/video1' /lib/udev/rules.d/60-persistent-v4l.rules:7 udev_event_spawn: starting 'v4l_id /dev/video1' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_VERSION=2' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_PRODUCT=Logitech QuickCam Pro 3000' spawn_read: 'v4l_id /dev/video1'(out) 'ID_V4L_CAPABILITIES=:capture:' spawn_wait: 'v4l_id /dev/video1' [2609] exit with return code 0 udev_rules_apply_to_event: IMPORT builtin 'usb_id' /lib/udev/rules.d/60-persistent-v4l.rules:9 builtin_usb_id: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0: if_class 10 protocol 0 udev_builtin_add_property: ID_VENDOR=046d udev_builtin_add_property: ID_VENDOR_ENC=046d udev_builtin_add_property: ID_VENDOR_ID=046d udev_builtin_add_property: ID_MODEL=08b0 udev_builtin_add_property: ID_MODEL_ENC=08b0 udev_builtin_add_property: ID_MODEL_ID=08b0 udev_builtin_add_property: ID_REVISION=0002 udev_builtin_add_property: ID_SERIAL=046d_08b0_01402100A5000000 udev_builtin_add_property: ID_SERIAL_SHORT=01402100A5000000 udev_builtin_add_property: ID_TYPE=generic udev_builtin_add_property: ID_BUS=usb udev_builtin_add_property: ID_USB_INTERFACES=:0aff00:010100:010200: udev_builtin_add_property: ID_USB_INTERFACE_NUM=00 udev_builtin_add_property: ID_USB_DRIVER=Philips webcam udev_rules_apply_to_event: LINK 'v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:10 udev_rules_apply_to_event: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-v4l.rules:16 udev_builtin_add_property: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 udev_builtin_add_property: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 udev_rules_apply_to_event: LINK 'v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' /lib/udev/rules.d/60-persistent-v4l.rules:17 udev_rules_apply_to_event: RUN 'udev-acl --action=$env{ACTION} --device=$env{DEVNAME}' /lib/udev/rules.d/70-udev-acl.rules:74 udev_rules_apply_to_event: LINK 'webcam1' /etc/udev/rules.d/jj-video.rules:2 udev_event_execute_rules: no node name set, will use kernel supplied name 'video1' udev_node_add: creating device node '/dev/video1', devnum=81:1, mode=0660, uid=0, gid=44 udev_node_mknod: preserve file '/dev/video1', because it has correct dev_t udev_node_mknod: preserve permissions /dev/video1, 020660, uid=0, gid=44 node_symlink: preserve already existing symlink '/dev/char/81:1' to '../video1' link_find_prioritized: found 'c81:2' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' udev_device_new_from_syspath: device 0x21516748 has devpath '/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/video4linux/video2' udev_device_read_db: device 0x21516748 filled with db file data link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-id\x2fusb-046d_08b0_01402100A5000000-video-index0' link_update: creating link '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' to '/dev/video1' node_symlink: atomically replace '/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/v4l\x2fby-path\x2fpci-0000:00:1d.0-usb-0:2:1.0-video-index0' link_update: creating link '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0' to '../../video1' link_find_prioritized: found 'c81:1' claiming '/run/udev/links/webcam1' link_update: creating link '/dev/webcam1' to '/dev/video1' node_symlink: preserve already existing symlink '/dev/webcam1' to 'video1' udev_device_update_db: created db file '/run/udev/data/c81:1' for '/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1' ACTION=add COLORD_DEVICE=1 COLORD_KIND=camera DEVLINKS=/dev/v4l/by-id/usb-046d_08b0_01402100A5000000-video-index0 /dev/v4l/by-path/pci-0000:00:1d.0-usb-0:2:1.0-video-index0 /dev/webcam1 DEVNAME=/dev/video1 DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/video4linux/video1 ID_BUS=usb ID_MODEL=08b0 ID_MODEL_ENC=08b0 ID_MODEL_ID=08b0 ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0 ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0 ID_REVISION=0002 ID_SERIAL=046d_08b0_01402100A5000000 ID_SERIAL_SHORT=01402100A5000000 ID_TYPE=generic ID_USB_DRIVER=Philips webcam ID_USB_INTERFACES=:0aff00:010100:010200: ID_USB_INTERFACE_NUM=00 ID_V4L_CAPABILITIES=:capture: ID_V4L_PRODUCT=Logitech QuickCam Pro 3000 ID_V4L_VERSION=2 ID_VENDOR=046d ID_VENDOR_ENC=046d ID_VENDOR_ID=046d MAJOR=81 MINOR=1 SUBSYSTEM=video4linux TAGS=:udev-acl: UDEV_LOG=6 USEC_INITIALIZED=18213768 run: 'udev-acl --action=add --device=/dev/video1' jjk@eee-old:~$ (and correspondingly for video2) It looks to me like my rules are read, but not respected. What am I doing wrong?

  Read the article

• Can't update scala on Gentoo

  - by xhochy

  As I wanted to test Scala 2.9.2 on my gentoo system I tried updated the package but ended up with this error. I can't figure out where the problem may be: Calculating dependencies ...... done! >>> Verifying ebuild manifests >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Emerging (1 of 1) dev-lang/scala-2.9.2 >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Failed to emerge dev-lang/scala-2.9.2, Log file: >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log' >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 running, 1 failed Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 failed Load avg: 0.23, 0.16, 0.20 * Package: dev-lang/scala-2.9.2 * Repository: gentoo * Maintainer: [email protected] * USE: amd64 elibc_glibc kernel_linux multilib userland_GNU * FEATURES: sandbox [01m[31;06m!!! ERROR: Couldn't find suitable VM. Possible invalid dependency string. Due to jdk-with-com-sun requiring a target of 1.7 but the virtual machines constrained by virtual/jdk-1.6 and/or this package requiring virtual(s) jdk-with-com-sun[0m * Unable to determine VM for building from dependencies: NV_DEPEND: virtual/jdk:1.6 java-virtuals/jdk-with-com-sun !binary? ( dev-java/ant-contrib:0 ) app-arch/xz-utils >=dev-java/java-config-2.1.9-r1 source? ( app-arch/zip ) >=dev-java/ant-core-1.7.0 dev-java/ant-nodeps >=dev-java/javatoolkit-0.3.0-r2 >=dev-lang/python-2.4 * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. !!! When you file a bug report, please include the following information: GENTOO_VM= CLASSPATH="" JAVA_HOME="" JAVACFLAGS="" COMPILER="" and of course, the output of emerge --info * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' * Messages for package dev-lang/scala-2.9.2: * Unable to determine VM for building from dependencies: * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' The following eix output may help: % eix java-virtuals/jdk-with-com-sun [I] java-virtuals/jdk-with-com-sun Available versions: 20111111 {{ELIBC="FreeBSD"}} Installed versions: 20111111(16:08:51 18/04/12)(ELIBC="-FreeBSD") Homepage: http://www.gentoo.org Description: Virtual ebuilds that require internal com.sun classes from a JDK Both virtual jdks 1.6 and 1.7 are installed: % eix virtual/jdk [I] virtual/jdk Available versions: (1.4) ~1.4.2-r1[1] (1.5) 1.5.0 ~1.5.0-r3[1] (1.6) 1.6.0 1.6.0-r1 (1.7) (~)1.7.0 Installed versions: 1.6.0-r1(1.6)(23:22:48 10/11/12) 1.7.0(1.7)(23:21:09 10/11/12) Description: Virtual for JDK [1] "java-overlay" /var/lib/layman/java-overlay

  Read the article

• No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

  - by Nick

  I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

  Read the article

• Triangle Picking Picking Back faces

  - by Tangeleno

  I'm having a bit of trouble with 3D picking, at first I thought my ray was inaccurate but it turns out that the picking is happening on faces facing the camera and faces facing away from the camera which I'm currently culling. Here's my ray creation code, I'm pretty sure the problem isn't here but I've been wrong before. private uint Pick() { Ray cursorRay = CalculateCursorRay(); Vector3? point = Control.Mesh.RayCast(cursorRay); if (point != null) { Tile hitTile = Control.TileMesh.GetTileAtPoint(point); return hitTile == null ? uint.MaxValue : (uint)(hitTile.X + hitTile.Y * Control.Generator.TilesWide); } return uint.MaxValue; } private Ray CalculateCursorRay() { Vector3 nearPoint = Control.Camera.Unproject(new Vector3(Cursor.Position.X, Control.ClientRectangle.Height - Cursor.Position.Y, 0f)); Vector3 farPoint = Control.Camera.Unproject(new Vector3(Cursor.Position.X, Control.ClientRectangle.Height - Cursor.Position.Y, 1f)); Vector3 direction = farPoint - nearPoint; direction.Normalize(); return new Ray(nearPoint, direction); } public Vector3 Camera.Unproject(Vector3 source) { Vector4 result; result.X = (source.X - _control.ClientRectangle.X) * 2 / _control.ClientRectangle.Width - 1; result.Y = (source.Y - _control.ClientRectangle.Y) * 2 / _control.ClientRectangle.Height - 1; result.Z = source.Z - 1; if (_farPlane - 1 == 0) result.Z = 0; else result.Z = result.Z / (_farPlane - 1); result.W = 1f; result = Vector4.Transform(result, Matrix4.Invert(ProjectionMatrix)); result = Vector4.Transform(result, Matrix4.Invert(ViewMatrix)); result = Vector4.Transform(result, Matrix4.Invert(_world)); result = Vector4.Divide(result, result.W); return new Vector3(result.X, result.Y, result.Z); } And my triangle intersection code. Ripped mainly from the XNA picking sample. public float? Intersects(Ray ray) { float? closestHit = Bounds.Intersects(ray); if (closestHit != null && Vertices.Length == 3) { Vector3 e1, e2; Vector3.Subtract(ref Vertices[1].Position, ref Vertices[0].Position, out e1); Vector3.Subtract(ref Vertices[2].Position, ref Vertices[0].Position, out e2); Vector3 directionCrossEdge2; Vector3.Cross(ref ray.Direction, ref e2, out directionCrossEdge2); float determinant; Vector3.Dot(ref e1, ref directionCrossEdge2, out determinant); if (determinant > -float.Epsilon && determinant < float.Epsilon) return null; float inverseDeterminant = 1.0f/determinant; Vector3 distanceVector; Vector3.Subtract(ref ray.Position, ref Vertices[0].Position, out distanceVector); float triangleU; Vector3.Dot(ref distanceVector, ref directionCrossEdge2, out triangleU); triangleU *= inverseDeterminant; if (triangleU < 0 || triangleU > 1) return null; Vector3 distanceCrossEdge1; Vector3.Cross(ref distanceVector, ref e1, out distanceCrossEdge1); float triangleV; Vector3.Dot(ref ray.Direction, ref distanceCrossEdge1, out triangleV); triangleV *= inverseDeterminant; if (triangleV < 0 || triangleU + triangleV > 1) return null; float rayDistance; Vector3.Dot(ref e2, ref distanceCrossEdge1, out rayDistance); rayDistance *= inverseDeterminant; if (rayDistance < 0) return null; return rayDistance; } return closestHit; } I'll admit I don't fully understand all of the math behind the intersection and that is something I'm working on, but my understanding was that if rayDistance was less than 0 the face was facing away from the camera, and shouldn't be counted as a hit. So my question is, is there an issue with my intersection or ray creation code, or is there another check I need to perform to tell if the face is facing away from the camera, and if so any hints on what that check might contain would be appreciated.

  Read the article

• ?Linux 6???UDEV??RAC ASM???????

  - by Liu Maclean(???)

  Maclean?????UDEV??ASMLIB?RAC???????????,???????????????????:Why ASMLIB and why not???UDEV????RAC ASM?????  ?«??UDEV????RAC ASM????? »???????????????,????????udev rule????: for i in b c d e f g h i j k ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id -g -u -s %p\", RESULT==\"`scsi_id -g -u -s /block/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ?????Linux 5?????, ????????redhat/Oracle Linux 6???????????? ????: ?OEL6??RHEL6?,????????? ??????:1. scsi_id??????????,scsi_id -g -u -s??????????2. udevtest???????,????udevadm??How to use udev for Oracle ASM in Oracle Linux 6   ???????????,???redhat/Oracle Linux 6??????udev rule ????: 1. #????? Linux 6.0???? [root@vrh6 dev]# cat /etc/issue Oracle Linux Server release 6.2 Kernel \r on an \m 2. #?????/etc/scsi_id.config echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config 3. #?????????udev?? [root@vrh6 dev]# ls -l sd* brw-rw----. 1 root disk 8, 0 Jun 30 09:29 sda brw-rw----. 1 root disk 8, 1 Jun 30 09:29 sda1 brw-rw----. 1 root disk 8, 2 Jun 30 09:29 sda2 brw-rw----. 1 root disk 8, 16 Jun 30 09:29 sdb brw-rw----. 1 root disk 8, 32 Jun 30 09:29 sdc brw-rw----. 1 root disk 8, 48 Jun 30 09:29 sdd brw-rw----. 1 root disk 8, 64 Jun 30 09:29 sde brw-rw----. 1 root disk 8, 80 Jun 30 09:29 sdf ??????? sdb-> sdf???????? 4. ? b->f?????for ???,??: # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ????sdb->sdf ?????RULE,????RULE???/etc/udev/rules.d/99-oracle-asmdevices.rules? ??????????? ,??RULE?99-oracle-asmdevices.rules # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules done 5. ?????root??/sbin/start_udev ?? ??????: [root@vrh6 dev]# echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config [root@vrh6 dev]# for i in b c d e f ; > do > echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules > done [root@vrh6 dev]# [root@vrh6 dev]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB09cadb31-cfbea255", NAME="asm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB5f097069-59efb82f", NAME="asm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4", NAME="asm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBdcce9285-b13c5a27", NAME="asm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB82effe1a-dbca7dff", NAME="asm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" [root@vrh6 dev]# [root@vrh6 dev]# /sbin/start_udev Starting udev: [ OK ] [root@vrh6 dev]# ls -l asm* brw-rw----. 1 grid asmadmin 8, 16 Jun 30 09:34 asm-diskb brw-rw----. 1 grid asmadmin 8, 32 Jun 30 09:34 asm-diskc brw-rw----. 1 grid asmadmin 8, 48 Jun 30 09:34 asm-diskd brw-rw----. 1 grid asmadmin 8, 64 Jun 30 09:34 asm-diske brw-rw----. 1 grid asmadmin 8, 80 Jun 30 09:34 asm-diskf

  Read the article

• Set up linux box for secure local hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms Virtualhosts In the rssh section above I added a user to use for SFTP. In this users' home directory, I created a folder called 'https'. This is where the documents for this site will live, so I need to add a virtualhost that will point to it. I will use the above virtual interface for this site (herein called dev.site.local). vi /etc/http/conf/httpd.conf Add the following to the end of httpd.conf: <VirtualHost 192.168.1.3:80> ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> I put a dummy index.html file in the https directory just to check everything out. I tried browsing to it, and was met with permission denied errors. The logs only gave an obscure reference to what was going on: [Mon May 17 14:57:11 2010] [error] [client 192.168.1.100] (13)Permission denied: access to /index.html denied I tried chmod 777 et. al., but to no avail. Turns out, I needed to chmod+x the https directory and its' parent directories. chmod +x /home chmod +x /home/dev chmod +x /home/dev/https This solved that problem. DNS I'm handling DNS via our local Windows Server 2003 box. However, the CentOS documentation for BIND can be found here: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-bind.html SSL To get SSL working, I changed the following in httpd.conf: NameVirtualHost 192.168.1.3:443 #make sure this line is in httpd.conf <VirtualHost 192.168.1.3:443> #change port to 443 ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Unfortunately, I keep getting (Error code: ssl_error_rx_record_too_long) errors when trying to access a page with SSL. As JamesHannah gracefully pointed out below, I had not set up the locations of the certs in httpd.conf, and thusly was getting the page thrown at the broswer as the cert making the browser balk. So first, I needed to set up a CA and make certificate files. I found a great (if old) walkthrough on the process here: http://www.debian-administration.org/articles/284. Here are the relevant steps I took from that article: mkdir /home/CA cd /home/CA/ mkdir newcerts private echo '01' > serial touch index.txt #this and the above command are for the database that will keep track of certs Create an openssl.cnf file in the /home/CA/ dir and edit it per the walkthrough linked above. (For reference, my finished openssl.cnf file looked like this: http://pastebin.com/raw.php?i=hnZDij4T) openssl req -new -x509 -extensions v3_ca -keyout private/cakey.pem -out cacert.pem -days 3650 -config ./openssl.cnf #this creates the cacert.pem which gets distributed and imported to the browser(s) Modified openssl.cnf again per walkthrough instructions. openssl req -new -nodes -out dev.req.pem -config ./openssl.cnf #generates certificate request, and key.pem which I renamed dev.key.pem. Modified openssl.cnf again per walkthrough instructions. openssl ca -out dev.cert.pem -config ./openssl.cnf -infiles dev.req.pem #create and sign certificate. cp dev.cert.pem /home/dev/certs/cert.pem cp dev.key.pem /home/certs/key.pem I updated httpd.conf to reflect the certs and turn SSLEngine on: NameVirtualHost 192.168.1.3:443 <VirtualHost 192.168.1.3:443> ServerAdmin [email protected] DocumentRoot /home/dev/https SSLEngine on SSLCertificateFile /home/dev/certs/cert.pem SSLCertificateKeyFile /home/dev/certs/key.pem ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Put the CA cert.pem in a web-accessible place, and downloaded/imported it into my browser. Now I can visit https://dev.site.local with no errors or warnings. And this is where I'm at. I will keep editing this as I make progress. Any tips on how to configure SSL email would be appreciated.

  Read the article

• restart of web dev server every time load ASP.NET MVC application

  - by kjm

  Hi, I continously get this problem (stack trace below) when I start my ASP.NET MVC application and have to restart the web dev server and then it goes away. It appears to be happening on when I make modification in my jquery and then try to restart the application. protected void Application_Start() { InitialiseIocContainer(); RegisterViewEngine(ViewEngines.Engines); RegisterRoutes(RouteTable.Routes); SetupLogging(); } It appears to get caugth on the Application_start in global.asax. I've done lots of search in google but no luck. ITS DRIVING ME BONKERS!!!! can anyone help please Server Error in '/' Application. -------------------------------------------------------------------------------- Loading this assembly would produce a different grant set from other instances. (Exception from HRESULT: 0x80131401) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: Loading this assembly would produce a different grant set from other instances. (Exception from HRESULT: 0x80131401) Source Error: Line 30: RegisterRoutes(RouteTable.Routes); Line 31: SetupLogging(); Line 32: } Line 33: Line 34: private void SetupLogging() Source File: C:\UserData\SourceControl\LLNP4\Trunk\Web\Global.asax.cs Line: 32 Stack Trace: [FileLoadException: Loading this assembly would produce a different grant set from other instances. (Exception from HRESULT: 0x80131401)] LLNP4.MvcApplication.Application_Start() in C:\UserData\SourceControl\LLNP4\Trunk\Web\Global.asax.cs:32

  Read the article

• production vs dev server content-disposition filename encoding

  - by rgripper

  I am using asp.net mvc3, download file in the same browser (Chrome 22). Here is the controller code: [HttpPost] public ActionResult Uploadfile(HttpPostedFileBase file)//HttpPostedFileBase file, string excelSumInfoId) { ... return File( result.Output, "application/vnd.ms-excel", String.Format("{0}_{1:yyyy.MM.dd-HH.mm.ss}.xls", "????????????", DateTime.Now)); } On my dev machine I download a programmatically created file with the correct name "????????????_2012.10.18-13.36.06.xls". Response: Content-Disposition:attachment; filename*=UTF-8''%D0%A1%D1%83%D0%BC%D0%BC%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5_2012.10.18-13.36.06.xls Content-Length:203776 Content-Type:application/vnd.ms-excel Date:Thu, 18 Oct 2012 09:36:06 GMT Server:ASP.NET Development Server/10.0.0.0 X-AspNet-Version:4.0.30319 X-AspNetMvc-Version:3.0 And from production server I download a file with the name of the controller's action + correct extension "Uploadfile.xls", which is wrong. Response: Content-Disposition:attachment; filename="=?utf-8?B?0KHRg9C80LzQuNGA0L7QstCw0L3QuNC1XzIwMTIuMTAuMTgtMTMuMzYu?=%0d%0a =?utf-8?B?NTUueGxz?=" Content-Length:203776 Content-Type:application/vnd.ms-excel Date:Thu, 18 Oct 2012 09:36:55 GMT Server:Microsoft-IIS/7.5 X-AspNet-Version:4.0.30319 X-AspNetMvc-Version:3.0 X-Powered-By:ASP.NET Web.config files are the same on both machines. Why does filename gets encoded differently for the same browser? Are there any kinds of default settings in web.config that are different on machines that I am missing?

  Read the article

• tips for fixing bad coding/dev habits ?

  - by dfafa

  i want to become a better coder....so i have decided to sign up for computing science program...maybe a formal education can assist me. i started working on smaller projects to learn but currently i have really bad coding/dev habits which is hindering my productivity as the codebase increases.... i have highlighted them and perhaps someone could make suggestions (or redirect to resources) or a more efficient method. most stuff that i made in the past were web apps. i usually develop with putty + nano...i just love the minimalist feel i use winscp and develop directly on my private web server...too lazy to do it on localhost and upload it later. i dont use subversion control...which one do i need ? sometimes ctrl +z doesn't work well. when i run out of ideas for naming variable, i use swear words instead. i swear a lot when i get stuck....how to deal with anger issue ? my codes look ugly with comments everywhere. would rather use procedural coding finds "thinking" in OO difficult and time consuming i "write first think later". refactors code only if i am getting paid for it. dislikes configuring linux distro, Apache, MySQL, scaling, designing graphics and layouts. does not like writing tests likes working alone. does not like sharing codes. has an econ degree dislikes reading other people's code would rather write it on my own it seems my only true desire is to translate my ideas to a working prototype as fast as possible....it seems like i am very uninterested in the other details...could it be that i am not cut out to be a coder after all ? is going back to study comp sci a bad idea ?

  Read the article

• Dev-C++ and Detours compiling error

  - by Julio

  Hello. As title says I'm trying to compile with Dev-C++ a simple DLL using Detours, but I get this error: syntax error before token '&' on this lines: DetourAttach(&(PVOID &)trueMessageBox, hookedMessageBox) DetourDetach(&(PVOID &)trueMessageBox, hookedMessageBox) The complete code is #include <windows.h> #include <detours.h> #pragma comment( lib, "Ws2_32.lib" ) #pragma comment( lib, "detours.lib" ) #pragma comment( lib, "detoured.lib" ) int (WINAPI * trueMessageBox)(HWND hWnd, LPCSTR lpText, LPCSTR lpCaption, UINT uType) = MessageBox; int WINAPI hookedMessageBox(HWND hWnd, LPCSTR lpText, LPCSTR lpCaption, UINT uType) { LPCSTR lpNewCaption = "You've been hijacked"; int iReturn = trueMessageBox(hWnd, lpText, lpNewCaption, uType); return iReturn; } BOOL WINAPI DllMain( HINSTANCE, DWORD dwReason, LPVOID ) { switch ( dwReason ) { case DLL_PROCESS_ATTACH: DetourTransactionBegin(); DetourUpdateThread( GetCurrentThread() ); DetourAttach(&(PVOID &)trueMessageBox, hookedMessageBox) DetourTransactionCommit(); break; case DLL_PROCESS_DETACH: DetourTransactionBegin(); DetourUpdateThread( GetCurrentThread() ); DetourDetach(&(PVOID &)trueMessageBox, hookedMessageBox) DetourTransactionCommit(); break; } return TRUE; }

  Read the article

• rabbitmq-erlang-client, using rebar friendly pkg, works on dev env fails on rebar release

  - by lfurrea

  I am successfully using the rebar-friendly package of rabbitmq-erlang-client for a simple Hello World rebarized and OTP "compliant" app and things work fine on the dev environment. I am able to fire up an erl console and do my application:start(helloworld). and connect to the broker, open up a channel and communicate to queues. However, then I proceed to do rebar generate and it builds up the release just fine, but when I try to fire up from the self contained release package then things suddenly explode. I know rebar releases are known to be an obscure art, but I would like to know what are my options as far as deployment for an app using the rabbitmq-erlang-client. Below you will find the output of the console on the crash: =INFO REPORT==== 18-Dec-2012::16:41:35 === application: session_record exited: {{{badmatch, {error, {'EXIT', {undef, [{amqp_connection_sup,start_link, [{amqp_params_network,<<"guest">>,<<"guest">>,<<"/">>, "127.0.0.1",5672,0,0,0,infinity,none, [#Fun<amqp_auth_mechanisms.plain.3>, #Fun<amqp_auth_mechanisms.amqplain.3>], [],[]}], []}, {supervisor2,do_start_child_i,3, [{file,"src/supervisor2.erl"},{line,391}]}, {supervisor2,handle_call,3, [{file,"src/supervisor2.erl"},{line,413}]}, {gen_server,handle_msg,5, [{file,"gen_server.erl"},{line,588}]}, {proc_lib,init_p_do_apply,3, [{file,"proc_lib.erl"},{line,227}]}]}}}}, [{amqp_connection,start,1, [{file,"src/amqp_connection.erl"},{line,164}]}, {hello_qp,start_link,0,[{file,"src/hello_qp.erl"},{line,10}]}, {session_record_sup,init,1, [{file,"src/session_record_sup.erl"},{line,55}]}, {supervisor_bridge,init,1, [{file,"supervisor_bridge.erl"},{line,79}]}, {gen_server,init_it,6,[{file,"gen_server.erl"},{line,304}]}, {proc_lib,init_p_do_apply,3, [{file,"proc_lib.erl"},{line,227}]}]}, {session_record_app,start,[normal,[]]}} type: permanent

  Read the article

• Building a J2EE dev/test setup on a single PC

  - by John

  It's been a while since I did Java work, and even then I was never responsible for starting a large project from the very start... there were test/staging/production systems already running, etc, etc. Now I am looking to start a J2EE project from scratch on my trusty workstation, which has never been used for Java development and runs Windows 7 64bit. First of all, I'll be getting Eclipse. As far as writing the code goes I'm pretty happy. And running it through Eclipse is OK, but what I'd really want is to have a VM running MySQL and TomCat on which I can properly deploy my project and run/debug it 'remotely' from my dev PC. And I guess this should be done using Ant instead of letting Eclipse build the WAR for me, so that I don't end up with a dependence on Eclipse. I'm certain Eclipse can do this, so you hit a button and it runs Ant scripts, deploys and debugs for instance, but very hazy on it. Are there any good guides on this? I don't want to be taught Java, or even Ant, but rather the 'glue' parts like getting my test VM up and running under Windows, getting a build/test/deploy/run pipeline running through Eclipse, etc. One point, I only plan to use Windows... hosting a Windows VM on my Windwos desktop. And while I can use command-line tools like ant/svn, I'm much more a GUI person who loves IDE integration... I'd rather this didn't end up an argument about Linux or Vi, etc! I am looking for free, but am a MAPS subscriber, and run Win7 Ultimate in case that makes a difference as far as free VM solutions.

  Read the article

• xen 4.1 host priodically dropping network packets of domU

  - by Dyutiman Chakraborty

  I have xen 4.1 Host running on a ubuntu 12.04 LTS Server with ip 153.x.x.54. I have setup 2 VMs on it, namely, "dev.mydomain.com" and "web.mydomain.com" with ips 195.X.X.2 and 195.x.x.3 respectively. For network the VMs connect through xendbr0 (xen-bridge), and can accces the network properly. I can also login to the VMs with ssh with no issue. However when I ping any of the VMs, there is a high amount of periodic packet drop. If I the ping the xen host (dom0) there is no packet drop. Following is a output of "tcpdump | grep ICMP" on dOM0 while I was pinging one of the domU tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 05:19:55.682493 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 30, length 64 05:19:56.691144 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 31, length 64 05:19:57.698776 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 32, length 64 05:19:58.706784 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 33, length 64 05:19:59.714751 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 34, length 64 05:20:00.723144 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 35, length 64 05:20:01.730349 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 36, length 64 05:20:02.739017 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 37, length 64 05:20:03.746806 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 38, length 64 05:20:06.770326 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 41, length 64 05:20:07.778801 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 42, length 64 05:20:08.786481 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 43, length 64 05:20:09.794720 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 44, length 64 05:20:10.802395 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 45, length 64 05:20:11.810770 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 46, length 64 05:20:12.818511 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 47, length 64 05:20:13.826817 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 48, length 64 05:20:14.835125 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 49, length 64 05:20:15.842138 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 50, length 64 05:20:18.274072 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 1, length 64 05:20:19.282347 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 2, length 64 05:20:20.290746 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 3, length 64 05:20:21.297910 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 4, length 64 05:20:22.305656 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 5, length 64 05:20:23.314369 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 6, length 64 05:20:24.322055 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 7, length 64 05:20:25.329782 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 8, length 64 05:20:26.338473 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 9, length 64 05:20:27.346411 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 10, length 64 05:20:28.354175 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 11, length 64 05:20:29.361640 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 12, length 64 05:20:30.370026 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 13, length 64 05:20:31.377696 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 14, length 64 05:20:32.386151 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 15, length 64 05:20:33.394118 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 16, length 64 05:20:34.402058 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 17, length 64 05:20:35.409002 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 18, length 64 05:20:36.417692 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 19, length 64 05:20:36.496916 IP6 fe80::3285:a9ff:feec:fc69 > ip6-allnodes: HBH ICMP6, multicast listener querymax resp delay: 1000 addr: ::, length 24 05:20:36.499112 IP6 fe80::21c:c0ff:fe6c:c091 > ff02::1:ff6c:c091: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff6c:c091, length 24 05:20:36.507041 IP6 fe80::227:eff:fe11:fa3f > ff02::1:ff00:2: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:2, length 24 05:20:36.523919 IP6 fe80::21c:c0ff:fe77:6257 > ff02::1:ff77:6257: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff77:6257, length 24 05:20:36.544785 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff12:ea9a: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff12:ea9a, length 24 05:20:36.581740 IP6 fe80::5604:a6ff:fef1:6da7 > ff02::1:fff1:6da7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:fff1:6da7, length 24 05:20:36.600103 IP6 fe80::8a8:8aa0:5e18:917a > ff02::1:ff18:917a: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff18:917a, length 24 05:20:36.601989 IP6 fe80::227:eff:fe11:fa3e > ff02::1:ff11:fa3e: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff11:fa3e, length 24 05:20:36.611090 IP6 fe80::dcad:56ff:fe57:3bbe > ff02::1:ff57:3bbe: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff57:3bbe, length 24 05:20:36.660521 IP6 fe80::54:ff:fe02:1d31 > ff02::1:ff00:6: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:6, length 24 05:20:36.698871 IP6 fe80::21e:8cff:feb4:9f89 > ff02::1:ffb4:9f89: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ffb4:9f89, length 24 05:20:36.776548 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff01:7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff01:7, length 24 05:20:36.781910 IP6 fe80::54:ff:fe8f:6dd > ff02::1:ff00:3: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:3, length 24 05:20:36.865475 IP6 fe80::21c:c0ff:fe4a:ae9f > ff02::1:ff4a:ae9f: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff4a:ae9f, length 24 05:20:36.908333 IP6 fe80::dcad:45ff:fe90:84db > ff02::1:ff90:84db: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff90:84db, length 24 05:20:36.919653 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff00:7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:7, length 24 05:20:36.924276 IP6 fe80::59a2:2a4a:2082:6dee > ff02::1:ff82:6dee: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff82:6dee, length 24 05:20:37.001905 IP6 fe80::54:ff:fe8f:6dd > ff02::1:ff8f:6dd: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff8f:6dd, length 24 05:20:37.042403 IP6 fe80::54:ff:fe95:54f2 > ff02::1:ff95:54f2: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff95:54f2, length 24 05:20:37.090992 IP6 fe80::21c:c0ff:fe77:62ac > ff02::1:ff77:62ac: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff77:62ac, length 24 05:20:37.098118 IP6 fe80::d63d:7eff:fe01:b67f > ff02::1:ff01:b67f: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff01:b67f, length 24 05:20:37.118784 IP6 fe80::54:ff:fe12:ea9a > ff02::202: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::202, length 24 05:20:37.168548 IP6 fe80::54:ff:fe02:1d31 > ff02::1:ff02:1d31: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff02:1d31, length 24 05:20:41.743286 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 1, length 64 05:20:41.743542 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 1, length 64 05:20:42.743859 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 2, length 64 05:20:42.743952 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 2, length 64 05:20:43.745689 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 3, length 64 05:20:43.745777 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 3, length 64 05:20:44.746706 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 4, length 64 05:20:44.746796 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 4, length 64 05:20:45.747986 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 5, length 64 05:20:45.748082 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 5, length 64 05:20:46.749834 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 6, length 64 05:20:46.749920 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 6, length 64 05:20:47.750838 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 7, length 64 05:20:47.751182 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 7, length 64 05:20:48.751909 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 8, length 64 05:20:48.751991 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 8, length 64 05:20:49.752542 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 9, length 64 05:20:49.752620 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 9, length 64 05:20:50.754246 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 10, length 64 05:20:51.753856 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 11, length 64 05:20:52.752868 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 12, length 64 05:20:53.754174 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 13, length 64 05:20:54.753972 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 14, length 64 05:20:55.753814 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 15, length 64 05:20:56.753391 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 16, length 64 05:20:57.753683 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 17, length 64 05:20:58.753487 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 18, length 64 05:20:59.754013 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 19, length 64 05:21:00.753169 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 20, length 64 05:21:01.753757 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 21, length 64 05:21:02.753307 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 22, length 64 05:21:03.753021 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 23, length 64 05:21:04.753628 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 24, length 64 ^C479 packets captured 718 packets received by filter 238 packets dropped by kernel 3 packets dropped by interface You see the ping request is not responed to initially, then for a moment it is replied back and then again no reply. I have tried everything (to the best of my knowledge) to fix this, but can't find any answer Any help will be greatly appreciated Thanks.

  Read the article

• I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS.

  - by Liath

  I am attempting to install Ubuntu on a box which was previously running Windows 7. I have also experienced the dreaded "Unable to install GRUB" error. I am not attempting to dual boot. I have previously run a Windows boot disk and removed all existing partitions. If I run the Ubuntu 12.04 install CD and click install after the config screens, I get the error Executing 'grub-install /dev/sda' failed. This is a fatal error. (It is the same error as this question: Unable to install GRUB) All the questions I've read while looking for a solution are related to dual boot. I'm not interested in dual boot, I'm after a clean out the box Ubuntu install. How can I achieve this? (For my sanity, please use very simple instructions when responding. I don't claim to have any talent either for linux or as a sysadmin) Additional details copied from comments dated: 2012-05-29 ~15:19Z After booting from the CD, clicking Try Ubuntu, and then sudo fdisk /dev/sda I get fdisk: unable to seek on /dev/sda: Invalid argument sudo fdisk /dev/sdb gives Device contains neither a valid DOS partiion table, nor Sun, SGI or OSF disklabel. Building a new DOS disklabel with disk identifier 0x15228d1d. Changes will remain in memory only until you decide to write them. After that of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite). Command (m for help): I should add the Live CD desktop is graphically bad. I've got missing parts of programs and the terminal occasionally reflects to the bottom of the screen. But I can't imagine this is related.

  Read the article

• NVidia ION and /dev/mapper/nvidia_... issues.

  - by Ritsaert Hornstra

  I have an NVidia ION board with 4 SATA ports and want to use that to run a Linux Server (CentOS 5.4). I first hooed up 3 HDs (that will be a RAID5 array) and a forth small boot HD. I first started to use the onboard RAID capability but that does not work correctly under Linux: the raid capacity is not a real RAID but uses lvm to define some arays. After setting the BIOS back to normal SATA mode and whiping the HDs, the first boot harddisk (/dev/sda) is seen as /dev/sda BEFORE mounting and after mounting as /dev/mapper/nvidia_. CentOS is unable to install on it (and grub is not installable on it either). So somehow the harddisk is still seen as if it belongs to some lvm volume. I tried to clean out the HD by issuing a few dd if=/dev/zero of=/dev/sda commands to wipe the starting cylinders and final cylinders but to no avail. Did anyone see this problem and did anyone find a solution? UPDATE When I create only a single ext3 partition on the first HD (/dev/mapper/nvidia_...) no LVM partitions are seen and I can boot from /dev/mapper/nvidia_.... Now the next step is to see how I can get rid of this folly.

  Read the article

• Linux Software RAID1: How to boot after (physically) removing /dev/sda? (LVM, mdadm, Grub2)

  - by flight

  A server set up with Debian 6.0/squeeze. During the squeeze installation, I configured the two 500GB SATA disks (/dev/sda and /dev/sdb) as a RAID1 (managed with mdadm). The RAID keeps a 500 GB LVM volume group (vg0). In the volume group, there's a single logical volume (lv0). vg0-lv0 is formatted with extfs3 and mounted as root partition (no dedicated /boot partition). The system boots using GRUB2. In normal use, the systems boots fine. Also, when I tried and removed the second SATA drive (/dev/sdb) after a shutdown, the system came up without problem, and after reconnecting the drive, I was able to --re-add /dev/sdb1 to the RAID array. But: After removing the first SATA drive (/dev/sda), the system won't boot any more! A GRUB welcome message shows up for a second, then the system reboots. I tried to install GRUB2 manually on /dev/sdb ("grub-install /dev/sdb"), but that doesn't help. Appearently squeeze fails to set up GRUB2 to launch from the second disk when the first disk is removed, which seems to be quite an essential feature when running this kind of Software RAID1, isn't it? At the moment, I'm lost whether this is a problem with GRUB2, with LVM or with the RAID setup. Any hints?

  Read the article

• Forms Authentication works on dev server but not production server (same SQL db)

  - by Desmond

  Hi, I have the same problem as a previously solved question however, this solution did not help me. I have posted the previous question and answer below: http://stackoverflow.com/questions/2215963/forms-authentication-works-on-dev-server-but-not-production-server-same-sql-db/2963985#2963985 Question: I've never had this problem before, I'm at a total loss. I have a SQL Server 2008 database with ASP.NET Forms Authentication, profiles and roles created and is functional on the development workstation. I can login using the created users without problem. I back up the database on the development computer and restore it on the production server. I xcopy the DLLs and ASP.NET files to the server. I make the necessary changes in the web.config, changing the SQL connection strings to point to the production server database and upload it. I've made sure to generate a machine key and it is the same on both the development web.config and the production web.config. And yet, when I try to login on the production server, the same user that I'm able to login successfully with on the development computer, fails on the production server. There is other content in the database, the schema generated by FluentNHibernate. This content is able to be queried successfully on both development and production servers. This is mind boggling, I believe I've verified everything, but obviously it is still not working and I must have missed something. Please, any ideas? Answer: I ran into a problem with similar symptoms at one point by forgetting to set the applicationName attribute in the web.config under the membership providers element. Users are associated to a specific application. Since I didn't set the applicationName, it defaulted to the application path (something like "/MyApplication"). When it was moved to production, the path changed (for example to "/WebSiteFolder/SomeSubFolder /MyApplication"), so the application name defaulted to the new production path and an association could not be made to the original user accounts that were set up in development. Could your issues possibly be the same as mine? I have this already in my web.config but still get the issue. Any ideas? <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/"/> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/"/> </providers> </profile> <roleManager enabled="false"> <providers> <clear/> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager> Any help is greatly appriciated.

  Read the article

• Bluray Drives: 2x vs 4x vs 6x vs 8x read/writespeed.

  - by Wesley

  Hi all, I couldn't find a duplicate question, but I was wondering what the differences are between different read/write speeds for Bluray drive. I'm planning on buying one for a build but don't know if I can cheap out on getting a Bluray 2x drive or spend more money for a quality Bluray 8x drive. Will I just experience more lag/buffering times for Bluray discs on a 2x and none for a 6x or 8x? Thanks in advance.

  Read the article

• PC BluRay - Multichannel HD Audio output

  - by sheepsimulator

  When playing a BluRay movie on a PC (any OS, Mac/Win/Linux), I have some questions about audio output: When playing a BluRay disc on the PC using a BluRay player program, can it decode the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) and output the audio directly to the soundcard's 7.1 line-level analog outputs? Is it possible to bitstream the the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) over the HDMI output to a receiver when using a BluRay player program? I'd kinda like to know. I'm contemplating building a home theater PC, and the above functionality is important. I'd prefer that #1 is possible, actually, because it would mean I wouldn't have to buy a receiver.

  Read the article

• Loose component cables causing HDMI video problems

  - by jwir3

  I'm not sure this is the correct forum, but I'll ask anyway. I have an A/V setup at home that has something like the following: Five Components (actually a few more, like a CD player, but they don't really relate to this question): Older Pioneer Receiver Digital Set Top Box Sony BluRay Player Samsung Plasma TV Speakers The reason for the receiver is so that all the sound can go through the speakers, rather than some going to the TV speakers and some to the external speakers. They are connected as follows: Digital Set Top Box connects via component video to Samsung TV directly via Component 2 (audio goes to Older Pioneer Receiver). Sony BluRay player is connected via HDMI 1 to TV, but audio goes to the receiver. Now, the problem I'm having is that when I have the digital set top box connected, there are times when the Netflix or Hulu streams I watch through the Sony BluRay player (it's connected to a router for internet access) will lose video. What I mean by this is that the sound of the episode will keep playing, but the screen will go black. If I jiggle the component cables, it will often come back. If I disconnect the component cables, it will always come back. I've noticed that one of the connections (the red component cable) doesn't like to sit very well in the component socket in the back of the digital set top box. It seems like there is a bad connection here, but it doesn't seem like this should be affecting the HDMI input at all. What I've noticed, though, is that when I disconnect the digital set top box completely (i.e. remove the component cable from the back of the TV), the problem seems to resolve itself. I'm not talking about actually removing the cable physically, because I thought perhaps the cables were mashing against one another, and possibly jiggling each other loose. To correct this possible problem, I took the component cable completely out of the cable ties it was in in the back of my entertainment center, as well as pulled the digital set top box out from the entertainment center altogether. It's now connected directly to the TV, without any other cables touching it to cause some kind of weird interference or just physical pulling on the cable. Same problem. If, however, I disconnect the component cable and just leave it sitting behind the TV, then the problem goes away. So, my question is this - what could be causing this? Is it a case where it's an improperly shielded component cable that's causing interference with the HDMI input, or something that's wrong with the TV? It's an intermittent problem, so it's difficult to track down. The TV isn't that old, so it's probably still under warranty. I'm just wondering if there is something else I can do that might reduce this problem without having to haul a massive television set out of my house to get repaired/replaced.

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Unable to play bluray movies or see bluray discs

  - by Jason Shultz

  I have a Optiarc BD ROM BC-5500S ATA Device and when I put bluray discs into the drive the computer doesn't read them. I hear the drive make 3 noises as if it's trying to read them. Nothing shows up in windows explorer. I am running windows 7 64bit. I can read DVDs and CDs just fine. Bluray seems to be the only problem. I have installed PowerDVD9, HP DVD Play and HP DVD Media Smart and nothing helps. My laptop is a hp dv7 1273cl. I bought it before the free upgrades to windows 7 were available so I wasn't able to get the upgrade and so HP won't assist me beyond telling me to format and reinstall Vista.

  Read the article

• BDrip vs BRrip?

  - by ahmed

  What is the difference between a BDrip and a BRrip? I often see these term while downloading videos.And which one is better in quality ?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >